summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-09-19AGESA binaryPI: Clean up amdfamXX.h includeKyösti Mälkki
Change-Id: Iba8b8d33e1f10e28745234988d97d4fafd04c798 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-16mb/google/poppy: Add lens_focus property for OV13858 camera moduleV Sowmya
Add lens_focus property with reference to VCM device for OV13858 camera module to register the corresponding v4l2 sub-device asynchronously. BUG=b:64133998 BRANCH=none TEST=Build and boot soraka. Dump DSDT and verified that it has the required entries and verified the camera functionality. Change-Id: Ib22403f668dd07d6b9226fe2c22b533223b69473 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/21512 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-16google/lulu,gandof: set kb backlight on bootMatt DeVillier
Set keyboard backlight to 75% on boot, except when resuming from S3. This enables the backlight at a reasonable level prior to the OS driver taking over, providing early proof-of-life and enhanced usability in grub etc. Uses same method as other google boards with a keyboard backlight (chell, link, samus). 75% value determined based on user feedback. TEST: boot google/lulu,gandof boards, observe keyboard backlight enabled in pre-OS environment. Change-Id: I7ed59289419af21764b1b5bd0a534d3b630c6c6b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-16google/reks: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/reks (Lenovo Chromebook N22/N42) as a variant of the cyan Braswell basebaseboard. - Add board-specific code as the new reks variant - Add new I2C touchscreen device and SPD files to the baseboard for potential reuse by other variants Sourced from Chromium branch firmware-reks-7287.133.B, commit 7d812d4: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1"" Change-Id: Iac9e2b5661aa33e12927f4cb84ebaee36522a385 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-16google/edgar: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/edgar (Acer Chromebook 14 CB3-431) as a variant of the cyan Braswell basebaseboard. - Add board-specific code as the new edgar variant - Add common code to the baseboard which will apply to all variants other than cyan Sourced from Chromium branch firmware-edgar-7287.167.B, commit 2319742: Edgar: Add Micron MT52L256M32D1PF-107 SPD data Change-Id: I58548cbbc85828f37c0023e8aa9e09bdca612659 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-16mainboard/intel/glkrvp: Add support for audioHannah Williams
This patch adds the below: 1) Add correct SSP endpoint config for spk and headset 2) Update GPIO config for jack detection 3) Update GPIO config for I2S pins TEST=sound card binds TEST=cross checked SSDT entries from /sys/firmware/acpi/tables/ TEST=Jack interrupt works Change-Id: I32022ddacd79917730080889c040f842e0c9e6b9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/19799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-15mainboard/intel/cannonlake: Add ec entry into flashmapLijian Zhao
Add EC entries into chromeos.fmd file. BRANCH=None BUG=None TEST=Flash image and confirm system can get out of reset successfully. System will not be able to reach reset vector if flash map described in coreboot does not match intel flash map generated from fit. Change-Id: Ic18ce59941b4ff8171fe661d332e3e521d988341 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21526 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-15mb/google/poppy: enable AER for PCIe root port 0Rizwan Qureshi
Enable PCIe Advanced Error Reporting for PCIe root port 0. BUG=b:64798078 TEST="lspci" shows that AER is enabled in the capabilities list. Change-Id: I8a818a9539b8d4f103d551ffd59713c9bbbc13ce Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21425 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-15google/cyan: convert to variant configurationMatt DeVillier
Setup cyan to be the baseboard for other Google Braswell boards, to be added in subsequent commits: - Keep code common to all Google Braswell boards in the baseboard, and separate out the board-specific bits into the new cyan variant. - Define the I2C ACPI devices such that they can be easily reused for other variants. - Switch the trackpad/touchscreen interrupts from edge to level, for better performance/compatibility, as was done with all previous Google boards. - Add code to the baseboard to allow optional variant-specific parameters to be used for both memory and silicon init. - Remove superfluous includes, replace some hardcoded values with variables, and correct typos/formatting errors. Change-Id: Iabbbad16efa9cfa79338f4e94d0771779900d8d9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-14mainboard/intel/cannonlake_rvp-u: Configure USB portsPratik Prajapati
Configure USB2, USB3 and Type-C ports for CannonLake-U RVP Change-Id: Id875063721ccb62ad4b5187c81f6abf44bf93f74 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-14mainboard/intel/cannonlake_rvp-y: Configure USB portsPratik Prajapati
Configure USB2, USB3 and Type-C ports for CannonLake-Y RVP Change-Id: Ic3b6b481cb33bfefb267910a5e649877d900d109 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-14siemens/mc_apl1: Add delay to wait for legacy devicesWerner Zeh
There are old legacy onboard devices which are too slow for a coreboot boot with log level BIOS_ERR. In this case coreboot is so fast that these devices do not have enough time to become visible on the PCI bus and this in turn leads to missing resource allocation for this devices. The most generic way to work around this problem on existing hardware is to introduce a delay right before the PCI enumeration starts. The needed delay time depends on the hardware and will therefore be get from hwinfo. Change-Id: Ia91babc81e3a347bbc498c3def97b2ea70e10922 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/21518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-09-13AGESA vendorcode: Move PlatformInstall.hKyösti Mälkki
All thse Option.*Install.h files are about configuring what eventually is referenced in the final libagesa build. It's self-contained so isolate these together with PlatformInstall.h to hide them from rest of the build. Change-Id: Id9d90a3366bafc1ad01434599d2ae1302887d88c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13mb/google/soraka: Update DPTF parametersWisley Chen
Cloned from baseboard/dptf.asl and update the parameters for soraka. 1. Update DPTF CPU/TSR0/TSR1/TSR2 passive/critial trigger points. CPU: passive point:85, critial point:100 TSR0: passive point:55, critial point:65 TSR1: passive point:58, critial point:70 TSR2: passive point:60, critial point:75 TSR3: passive point:60, critial point:75 2. Set PL1 Max to 7W, and PL1 Min 4.5W 3. Change sampling period of thermal relationship table (TRT) setting CPU: 5 seconds TSR0: 30 seconds TSR1: 30 seconds TSR2: 8 seconds TSR3: 8 Seconds BUG=b:65467566 TEST=build, boot on soraka, and verified by thermal team. Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I6af93fa358a037df2088213ee4df5e2cfd047590 Reviewed-on: https://review.coreboot.org/21453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-13mb/google/soraka: Fine-tune USB 2.0 port4Wisley Chen
Fine tune usb 2.0 strength for port 4 to pass eye diagram. BUG=b:65306272 TEST=build on soraka, measure usb2.0 eye diagram, and result is pass. Change-Id: I2c79e96e2e3dea1364d7b71af19b57f4c9307fcb Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-13asus/p2b-ls,asus/p3b-f: Move to EARLY_CBMEM_INITKeith Hui
These two boards have been boot tested with EARLY_CBMEM_INIT and is good to go. Change-Id: I2e69901ed83502894f6794b3c1d7bab9aab95e51 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21351 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-13google/snappy: Update EC keyboard backlight flag by SKU IDKevin Chiu
Set AP SKU ID by ec command EC_CMD_SET_SKU_ID to update EC keyboard backlight flag. BUG=b:65359225 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I1153aa0b89250c55f311dd93a01fcef47afd7292 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13mainboard/intel/cannonlake_rvp: Include ChromeOS supportLijian Zhao
Add ChromeOS support for cannonlake_rvp platform. Change-Id: Ia02407da8ab4aac2c2c33a7796fc71aea12e2925 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13mainboard/intel/cannonlake_rvp: Add dummy DSDT tableLijian Zhao
Add dummy ACPI DSDT table for cannonlake rvp platform. Change-Id: If45c2a7da7f5b20ddd3d56bf9d7f68a85d2f791d Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-12mb/intel/dg43gt: Fix smbus IRQArthur Heymans
This board uses the reset defaults for DxxIP and DxxIR. The datasheet "Intel ® I/O Controller Hub 10 (ICH10) Family" mistakenly says in the D31IP register that all function have INTB as default. This is however not true as documented in the reset default value. This fixes the DSDT such that the SMBus device gets a route for the INT C interrupt it uses. Change-Id: I3dd1308fb7acec86b90ecd9d2079cf9a58702c40 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21442 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-12mb/intel/dg43gt: Select right gmbus port for VGA outputArthur Heymans
TESTED: NGI works on VGA with adapter on DVI-I port Change-Id: I4bd9d451295d26a3e11ded9863f5d45d42c8fead Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-12mb/intel/dg43gt: Configure clockgenArthur Heymans
This makes the VGA output on the DVI-I connector usable. This reuses vendor settings. Change-Id: Ib8b6bf33816f7e468a09ff5e2008c2cb9f7c0a8b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-12AGESA boards: Clean up Ids.h and Filecode.h includesKyösti Mälkki
Change-Id: I9cb63ff58900a39d7cd8e3da2b9a9a95c2a41a69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-12AGESA boards: Drop heapManager.h includesKyösti Mälkki
Change-Id: I1a96b1c6181cd657d7aee82370ef86acd688cc94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-12AGESA CIMX: Remove empty set_pcie_(de)resetKyösti Mälkki
For boards with cimx/sb800, mainboards defined only empty stubs. Reset functionality is handled as BiosCallout. For amd/inagua, the defined function was actually initial GPIO programming. For cimx/sb700, function had prototypes but no callers. For cimx/sb900, everything was commented out already. Change-Id: I936feb4fc41d903078620c919a733bb9f39c3efb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-12AGESA boards: Clean up some includesKyösti Mälkki
Change-Id: I84c70aa04ab556a3898d3525f7b9aab85812f61d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-11mb/lenovo/*/devicetree: Add BDC detection supportPatrick Rudolph
Add support for BDC detection, based on the schematics for each board. Support for boards without schematics needs further testing. Needs test on all boards. Change-Id: If33ef88fb808f36b050393fa83eb1b541ce936b9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-09-11mainboard/intel/cannonlake_rvp: enable eMMCBora Guvendik
Set SCS emmc enable FSP parameter. Change-Id: Ib3d7a305c3bede439249204cf14d50e3eb8b6915 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21409 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-09-11kahlee: Add RO_VPD region in FMAPMarc Jones
The RO_VPD region is required for ChromeOS. BUG=b:65408869 TEST=Build and check coreboot.rom with fmap_decode. Change-Id: I9c475acc5e34a3a41f815990fb1f363963c7b9b9 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-08siemens/mc_apl1: Disable internal UARTsMario Scheithauer
APL internal UARTs are not used on this mainboard. Change-Id: I39118262fc6f37b45785538a3f2d1d31d42cbe86 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/21406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-09-08siemens/mc_apl1: Set bus master bit for on-board PCI deviceMario Scheithauer
There is one on-board PCI device where bus master has to be enabled in PCI configuration space. As there is no need for a complete PCI driver for this device just set the bus master bit in mainboard_final(). Change-Id: I45202937eba11da3bea14fef6ebed70599804335 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/21405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-09-06google/gru: Re-enable 3V rail GPIO on ScarletJulius Werner
We've decided to move control for the 3.0V rail (technically 3.3V on Scarlet, but who cares about millivolts) back to a GPIO on the AP for Scarlet rev2. This patch adds the necessary code to enable it and make ARM TF aware of its existence. Since the pin had previously not been connected to anything, we shouldn't really need to guard this by board ID... older Scarlets will just be twiddling an empty pin. Change-Id: I6037aa486b50119f2c7b859b966cadc3686e3459 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/21328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Schneider <dnschneid@chromium.org>
2017-09-06AGESA f14: Work around soft-resetsKyösti Mälkki
Vendorcode expects some DRAM controller registers to be writable, but they are actually locked after soft resets if C6 states are enabled. Without the workaround, raminit fails on soft resets. Change-Id: I6b9e275e11b2907d026c13341334983a4d9c8889 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06mainboard/lippert: Refactor SEMA watchdog messageKyösti Mälkki
It's too critical to ignore when sending the message on SMBus fails, so allow for a fair amount of retries. Failure here causes watchdog to do hard reset later. Move it out of mainboard.c as we need to call this early in romstage while we are debugging. Change-Id: I1006b079269d6dd44de630db7a5694124af2f974 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06asus/kgpe-d16: Add romstage_handoffKyösti Mälkki
Fix regression caused by commit 9e94dbf ACPI: Get S3 resume state from romstage_handoff Boards with EARLY_CBMEM_INIT are required to provide romstage_handoff structure to signal S3 resume path. Change-Id: I7c9065ccc48dfbdefade698ed275756f17dff7a0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21396 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06asus/kcma-d8: Add romstage_handoffKyösti Mälkki
Fix regression caused by commit 9e94dbf ACPI: Get S3 resume state from romstage_handoff Boards with EARLY_CBMEM_INIT are required to provide romstage_handoff structure to signal S3 resume path. Change-Id: I464feb1655a51a937b6cf53508dd5c7aa0d8f791 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-09-06asus/kcma-d8 kgpe/d16: Fix regression for shutdownKyösti Mälkki
Fix regression caused by commit: 714709f AMD fam10 ACPI: Use common fixed sleepstates.asl Adding common sleepstates.asl got lost in rebase process. Change-Id: I4f22ee950ae5637113db8e79ca238cb1b81002aa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Iru Cai <mytbk920423@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-06mb/google/{poppy,soraka,eve}: Add imon and vmon params for Max98927 codecHarsha Priya
This patch adds imon and vmon slot numbers for Maxim 98927 driver. These values are used to confiure IV feedback for audio playback on speakers. BUG=b:36724448 TEST=After boot, the register dump for Max98927 codecs should have imon and vmon slots numbers set in 0x1e register. Change-Id: I4382da4f984507d147751c168e8177b58c88a70f Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/21196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-06mb/google/soraka: enable AER for PCIe root port 0Rizwan Qureshi
Enable PCIe Advanced Error Reporting for PCIe root port 0. Change-Id: I76742801e84449d0910ddadf31d39597df3263b9 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06Revert "soc/intel/cannonlake: Add dummy ACPI DSDT table"Kyösti Mälkki
This reverts commit 6c0f3c7ee1d53872851dbab636787852e3572c98. Reason for revert: Broke master builds, this was submitted out-of-order, some of the dependencies have not passed review with +2 yet. Change-Id: Ib7bcb1b98623d16e074caeca839a936d71ded709 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2017-09-06mb/sapphire/pureplatinumh61: Disable the SuperIO serialNicola Corna
There is no serial port on this platform. In addition, put the LPC serial IRQ into quiet mode. Change-Id: I4b2c93c51e8ddb8b510f0d7f7e3072befeba5d95 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/21226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-06soc/intel/cannonlake: Add dummy ACPI DSDT tableLijian Zhao
A dummy DSDT table will be created for cannonlake. Change-Id: Ia435f2a03982313c6b0c63ac25668a3300d08793 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06arch/x86/Kconfig: Add deprecation warnings for LATE_CBMEM_INITJonathan Neuschäfer
The deprecation of late (post-romstage) CBMEM initialization was announced in this blog post: https://blogs.coreboot.org/blog/2017/05/08/announcing-coreboot-4-6/ There are two warnings: * In LATE_CBMEM_INIT's help text, I've added a multi-line warning, that aims to explain the problem. * In src/mainboard/Kconfig (just below the mainboard selection), there's a warning which points the user at LATE_CBMEM_INIT, if such a board is selected. Also update the function that needs to be implemented, as pointed out by Keith Hui and Kyösti Mälkki. Change-Id: I2d21a6ab2fc2811d44fc4febb05841bb2f8d1857 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-06mb/winnet/g170: Drop AMD car.h file from Via mainboardJonathan Neuschäfer
08f7d1ae0d ("mainboard/via*: Drop AMD car.h file") did the same for all Via mainboards that were in tree at that time, but the winnet/g170 was merged a bit later. Change-Id: Iedb33f4c2fce6fc2cf2669fee4ffb25bf793c92b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-05mb/google/soraka: Camera PMIC run time power controlNaresh G Solanki
Currently PMIC (tps68470) is in active state even when cameras are not in use. PMIC is put into SLEEP mode only when entering S3 via smihandler. With this change PMIC will be put into SLEEP mode as soon as sensors & VCM voltage outputs are turned off. This will allow run time power saving when camera is not in use. PMIC will be reset in first boot & across S3 & S0ix cycles. Also, remove the smi handler for PMIC power management & handle it as part of sensor and VCM ACPI PowerResource. BUG=b:63903239 TEST= Build for Soraka. Check Camera probe, Capture image across S3 & S0ix cycles. Also checked the following & found no regression: 1. Typical camera use cases 2. Stability tests related to camera 3. Reliability tests related to camera 4. PnP tests related to camera 5. Latency related tests with camera Change-Id: I23b0c0a887c9eb5d29b89f14aebba273b01228e0 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-05mainboard/intel/harcuvar: Add support for Intel Harcuvar CRBMariusz Szafranski
The Harcuvar CRB is a reference platform of Intel Atom C3000 SoC ("Denverton" and "Denverton-NS") for the communications segment/market. The MohonPeak coreboot was used as the starting template with additions/modifications from other Intel Apollo Lake/Skylake coreboot. Tested with TianoCore payload (UDK2015) and Poky (Yocto Project Reference Distro) 2.0 with kernel 4.1.8 booted from SATA drive and external USB pendrive. Change-Id: I088833e36e2d22d1fe1610b8dca1454092da511a Signed-off-by: Mariusz Szafranski <mariuszx.szafranski@intel.com> Reviewed-on: https://review.coreboot.org/20862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2017-09-02mainboard/google/fizz: Enable support for DPTFTsai, Gaggery
This patch adds the DPTF settings specfic to the mainboard and enables the CPU and other thermal sensors as participant device for fizz. It also enables the DPTF flag in the device tree for fizz. BUG=b:64915426 BRANCH=None TEST=emerge-fizz coreboot and run DPTF observation tool to make sure DPTF is up and running. Change-Id: Ic7d125a763f539158aa425fbba1d8a000a3465ca Signed-off-by: Tsai, Gaggery <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/21147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-09-02mainboard/google/soraka: Remove wacom digitizerWisley Chen
We have no wacom digitizer on I2C#3, so remove it. TEST=build and boot on soraka. Change-Id: I3f5a1b9ece6fc9a9443477c7a7aa77dbcdf6a703 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21309 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-02mb/hp: Enable ExpressCard hotplug in all ElitebooksIru Cai
The MPC.HPCE bit of the ExpressCard root port is not set in vendor firmware, so autoport didn't generate the right pcie_hotplug_map to support ExpressCard hotplug. Also add comments for each PCIe root port. Change-Id: Ic53e36a7192b9bfa8ff9fca57f4556e972e2611b Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/21310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-01intel/i440bx: Move LATE_CBMEM_INIT under mainboardKyösti Mälkki
Some of these will move to EARLY_CBMEM_INIT. Change-Id: Ia969e30ad7097860180bd047eaf81859a42a747c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Keith Hui <buurin@gmail.com>
2017-09-01lippert/toucan-af: Switch away from AGESA_LEGACYKyösti Mälkki
NOTE: Some code was currently left behind that may be required for certain type of board reboots. A followup patch will address this. Change-Id: I8fb89fb82c3a3608bb84b29319eb793605538996 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-01lippert/frontrunner-af: Switch away from AGESA_LEGACYKyösti Mälkki
NOTE: Some code was currently left behind that may be required for certain type of board reboots. A followup patch will address this. Change-Id: I3c1258b4e4dcf6fd04f57f5ab59cb1572a7d1fa3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-31google/gru: Support Nefario rev0Philip Chen
Do not assert GPIO1_B3 otherwise BT would be disabled on Nefario. Also, remove DVS support for CENTERLOGIC. BUG=b:64702054, b:63537905 TEST=build coreboot Change-Id: I350db2c080f2e41ae56413f5f895557978ef0ba8 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/21176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-31lenovo/g505s: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: Ia65f9ecb62767424744e399a43e4728666fd28b3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-31lenovo/g505s: Enable XHCI device in devicetreeKyösti Mälkki
Enabling XHCI is additionally controlled with Kconfig option HUDSON_XHCI_ENABLE. Even when it is enabled, it EHCI debug works on the USB port next to the DVD drive door. Change-Id: I83738da6015f58ecd0819c553d333a176365dc78 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-31lenovo/g505s: Switch from f15rl to f15tnKyösti Mälkki
Support code for Trinity and Richland is identical now. I have also come across a unit with Trinity model CPU, whose CPUID was not listed in f15rl while f15tn already had support for f15rl. Change-Id: Ia869429b75a9b308b4d4a84f16914ca629b1b1b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-30mainboard/google/soraka: Add stop gpio control to touchscreen deviceFurquan Shaikh
BUG=b:64987428 TEST=Verified that touchscreen works on boot-up and after suspend/resume. No power leakage via stop gpio in suspended state. Change-Id: Ia260eb444081dbe1646c90e82c2725661e7306bc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-08-30mainboard/google/soraka: Remove Atmel TouchscreenFurquan Shaikh
We no longer use this touchscreen device, so get rid of it. BUG=b:64987428 Change-Id: I67af787d231317a80998fb483eed5674de19aeb4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30google/cyan: update SPD functionsMatt DeVillier
Update cyan's SPD-related functions to more closely mirror those of other Braswell boards, in order to simplify the upcoming baseboard/variant setup for Braswell ChromeOS boards. TEST: boot google/cyan, observe SPD correctly identified in cbmem log, RAM-related data correct in SMBIOS tables. Change-Id: Iafe99ec0795764f645e0a91f5b321be5b4c6fd88 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-30drivers/i2c/ck505: Add generic driver to configure clockgenArthur Heymans
Replaces the ics/954309 driver with a more generic version to accommodate clockgens with a different amount of registers. It also features a mask to only touch certain bits of the clockgen. TODO: set appropriate mask for X60/T60 since the datasheets for their clockgens can be found. Change-Id: Ie43c4de7891a39f2f443e78213ecd688134e68d7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-30mb/google/eve: rt5514: Add 16ms delay on dmic initDuncan Laurie
Add a 16ms delay to DMIC init by the kernel driver in order to prevent an audible 'pop' noise when starting to record. BUG=b:63413023 TEST=manual testing to ensure this device property is present in SSDT: Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") Package () { Package () { "realtek,dmic-init-delay", 0x10 } } }) Change-Id: If9160ce6992153ba49719029de336595bbf4ae72 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/21271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-29mainboard/google/soraka: Tune I2C params (hcnt, lcnt, hold time)Furquan Shaikh
Tune I2C params for I2C buses 0, 1, 2, 4 and 5 to ensure that the frequency does not exceed 400KHz. BUG=b:35948024 TEST=Verified for 25 iterations that the frequency on each bus ranges <= 400KHz. I2C0: 393 - 397 I2C1: 393 - 400 I2C2: 392 - 400 I2C4: 392 - 400 I2C5: 392 - 400 Change-Id: I3e12c75eb7e82a83aa6a6bcfcc11c12f83f2d3d4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-08-28mb/lenovo/t400/blc.c: Add B141EW05 V3 to whitelistKevin Keijzer
TESTED on Lenovo T400 Change-Id: I365aeb7e997def225c23d3287558bdc4eefa4298 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/21230 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-28google/Bruce: Add Raydium touch screen supportSheng-Liang Pan
Current coreboot does not create ACPI device for OS to recognize Raydium touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64705535 BRANCH=master TEST=emerge-coral coreboot Change-Id: Ifdea897ef66dd10f29a8a0e72f9406d316fbe8c7 Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com> Reviewed-on: https://review.coreboot.org/21233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-28mainboard/winnet/g170: Add ACPI supportLubomir Rintel
What is present is APIC and legacy interrupt routing and the soft-off sleep state. Other sleep states are missing, so are the SuperIO devices. Boots Linux with and without "noapic" and a Windows XP (installed with factory BIOS, the installer reportedly requires legacy keyboard). Change-Id: Iee3ede8683d1ea51317228d4f782af27043cc945 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mainboard/winnet/g170: Initialize the IRQ routingLubomir Rintel
Initialize IRQ routing for legacy non-PNP OSes the same as the factory firmware would do. Change-Id: I0c7a7d584a2c47471456ab54ef6da815a2dc4e7c Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mainboard/winnet/g170: Add WinNET G170 boardLubomir Rintel
Change-Id: I0d7aba827fb87f69f542edd2f7ac7a66d949f865 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mainboard/winnet/g170: Copy from mainboard/bcom/winnetp680Lubomir Rintel
G170 is a board manufactured by WinNET, used in thin clients including HP Neoware CA19 and IGEL 2110. Copied from mainboard/bcom/winnetp680 which seems to be a similar board with an extra PCI slot. The p680 should probably be moved to winnet/ too, since the board is an OEM WinNET board, with BCom being just a machine that happens to it. Change-Id: I90b89ee634d90cfba2e56cca5b76cfd2bd7a8d0b Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mb/gigabyte/ga-b75m-d3*/acpi: Remove redundant codePatrick Rudolph
Remove obsolete code. The same settings are always done in southbridge. Change-Id: Ic893ddbace73ae8b122c4fb675febc7d1e0b5da9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28AGESA f15: Remove f10 referencesKyösti Mälkki
Vendorcode for f15 also has f10 support, so AMD_AGESA_FAMILY_10 was never selected. Change-Id: I9a026c36ace88f1110a52d7e24d3e6ab36508932 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-28mainboard/google/poppy: Tune I2C params (hcnt, lcnt, hold time)Furquan Shaikh
Tune I2C params for I2C buses 0, 1, 2, 4 and 5 to ensure that the frequency does not exceed 400KHz. BUG=b:35948024 TEST=Verified for 25 iterations that the frequency on each bus ranges <= 400KHz. I2C0: 375 - 400 I2C1: 377 - 400 I2C2: 377 - 400 I2C4: 375 - 397 I2C5: 375 - 397 Change-Id: Ie30e1a12b66c4660b648a585c4dfd66faf004129 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21208 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-27mb/lenovo/*/acpi_tables: Add critical and passive thresholdPatrick Rudolph
Add critical and passive threshold to be advertised in thermal zone 0. Change-Id: Ic75a80994b27ac19651ed52b7fc3c00c65cd9c01 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-25jetway/nf81-t56n-lf: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I6ad0c4cf2f0398f0b1efac1282822acf0d4a3610 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25amd/union_station: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I706de64ae5d940df70701c8b9dd717f8e212cd0e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25amd/south_station: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I09fe0e903a1241212f81e2a897898356a7e372a9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25amd/persimmon: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Id2ef3e5aa0ea3f6e714eda6d9dbdf62fb96c0a74 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25amd/inagua: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Ie76291a8e227e49aae6fc6339cec2009ebd67fff Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25elmex/pcm205400: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: Ib386b5d9ba636614016c3f9ac042fee43eac53f2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25asrock/e350m1: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I6ad99af55975b21b0a7671553246cdb5a1e19091 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25gizmosphere/gizmo: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I26e2450babfde1580e0e794c519344112d4019ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25pcengines/apu1: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I10b3e53a5e39764e3b199561d07391779804407c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25google/beltino: fix LED polarity for mccloud variantMatt DeVillier
The LED polarity was set incorrectly, fix using values derived from original Chromium sources: branch firmware-mccloud-5827.B, ToT src/mainboard/google/mccloud/smihandler.c src/mainboard/google/mccloud/romstage.c TEST: boot google/mccloud, observe power LED on normally, blinking in S3/S4, and off in S5. Change-Id: Ia1f63eebbccb48fcf8543188db390b23045d843e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25google/cyan: Increase RO coreboot size on flashMatt DeVillier
Commit 05627831826cab096789bd19f004b33a4cd70c0e applied this change to other Google boards, but cyan was left out. Bring cyan in line with other Google boards. Change-Id: Id86bea538a7b82367ea6ddbd3fe3efb1b1c0078d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-25google/cyan: Remove support for pre-EVT boardMatt DeVillier
Cleaning up code to remove support for pre-EVT rev of cyan board. Analogous to what was done for intel/strago in commit 103f00d. Change-Id: I29b32da8064e0743cc9c5df02ce7d3441459ee8f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Use GpioInt for Keyboard IRQJagadish Krishnamoorthy
Cherry-pick from Chromium commit a162348. Remove the hard coded IRQ number for the keyboard interrupt. IRQ number can change based upon the gpio bank index ordering. Hence pass the gpio bank and index number so that kernel calculates the IRQ number. Original-Change-Id: Icfe5c3995007164bf617575b541758c18ee63a1d Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I81ff19e3060c533ee76023c7651f741294e9db30 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Disable L1 sub stateT.H. Lin
Adapted from Chromium commit dc59188. Disable L1 sub state to prevent WiFi randomly disappear condition. Original-Change-Id: I8975bb4bbbc2fc89b91b06ae02716367890c672d Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Rajat Jain <rajatja@chromium.org> Original-Reviewed-by: Vincent Wang <vwang@chromium.org> Oriignal-Tested-by: TH Lin <t.h_lin@quanta.corp-partner.google.com> Change-Id: I51a1bcca6431e6bc28baf9b09433cec13db925c3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Add 2nd source memory 2-channel 4G (Micro/Samsung)T.H. Lin
Cherry-pick from Chromium commit 7f0cdf0. Cyan board add 4G DDR3L 2nd source memory (Micro/Samsung) Original-Change-Id: I12f82082d8227e61a97ce0a001d7d2b1f6613e06 Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Change-Id: Ieca7201346414d7a962f9619dbe846c67c0f02d6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Add 2nd source memory (Micro/Samsung)T.H. Lin
Cherry-pick from Chromium commit 3b578ef. Cyan board use new 2nd source memory (Micro/Samsung) Original-Change-Id: I6f4e8438faede7ac742776a622c265922e498898 Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Change-Id: Ie2febe4de57c00c269def15d57f2b5a6f0f378aa Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Fix Touchscreen InterruptJagadish Krishnamoorthy
Cherry-pick from Chromium commit 1138727. Elan touchscreen driver expects the first gpio resource in asl to be the reset line. The driver considers the gpio based irq line as reset gpio resource and changes the direction to output. This will cause irq registration to fail. Solution is to pass Interrupt resource for touchscreen irq instead of GpioInt. Original-Change-Id: Ia72d4ad80117f3c0014098113c9027416026e65e Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I1c4b029851e321feeedf713186976fbec42dd82e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Enable CA MirrorShobhit Srivastava
Cherry-pick from Chromium commit e49deb1. Configuring UPD PcdCaMirrorEn. This is a board specific parameter. CA mirror is the Command Address mirroring option that is board specific. Original-Change-Id: I05174e18d650332d838e5036c713e91c4840ee75 Original-Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Change-Id: Ibd0c811d41cb592634f7785edb83ad2f423546c5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Disable unused lines on Gpio North BankJagadish Krishnamoorthy
Cherry-pick from Chromium commit 1940eb6. The unused lines leads to spurious interrupts on few of the systems. Original-Change-Id: Ie539e1debc15dd1fd8707f8866c65714fc43e44b Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Original-Tested-by: Bernie Thompson <bhthompson@chromium.org> Change-Id: I6f4f7cec8ef11e781c66b6efff4188259469e41c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Clean-up the devicetreeRavi Sarawadi
Cherry-pick from Chromium 2b51633. Disable unused PCI devices. Update PCI DeviceID. Original-Change-Id: I34fa6e25f9178de959aad30cc979d787cf76b8ad Original-Signed-off-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7a06a1d44ce933000cbfe2eb71823ee66cb46a34 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Support reading Memory strap GPIOs to select SPDSubrata Banik
Cherry-pick from Chromium commit 8f63720. SoC GPIO to read Memory strap not getting configured correctly causing incorrect RAMID read during ROMSTAGE TEST=Build and boot the platform with differnt Memory type and read RAMID correctly inside spd.c RAMID = 0 => 4GB Samsung Memory RAMID = 1 => 4GB Hynix Memory RAMID = 2 => 2GB Samsung Memory RAMID = 3 => 2GB Hynix Memory Original-Change-Id: Ide9d4b5f73565cddd74cedf7afe4b7d168dde74c Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: If2ba9ec5be111b9c30360ffde41a2c644a69ecae Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-25mainboard/intel/cannonlake_rvp: SMBus, SAGV and Skip FSP MPInit in devicetreePratik Prajapati
Set SMBus, SAGV and Skip FSP MPInit configuration from devicetree.cb Change-Id: Ic810b003bf7fb13447d5d5dcd49cfcc31785b440 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/skylake: Add LPC and SPI lock down config optionSubrata Banik
This patch to provide new config options to perform LPC and SPI lock down either by FSP or coreboot. Remove EISS bit programming as well. TEST=Build and boot Eve and Poppy. Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25mainboard/google/coral: Add USB2 phy setting override for SantaTim Chen
In order to pass type C USB2 eye diagram for sku Santa, USB2 port#1 PHY register needs to be overridden. port#1: PERPORTPETXISET = 7 PERPORTTXISET = 2 BUG=b:64880573 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage Change-Id: I07c0b7b0f08263a348befb7d6fd8d01028314470 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25amd/pi/hudson: Fix FCH ECMartin Roth
Move the fchec.h files, which do not seem mainboard specific, out of the mainboard directories into the southbridge/soc directories. Change-Id: Idd271c6ab618aa4badf81c702212e7de35317021 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-25soc/amd/stoneyridge: Move IMC ASL sourceKyösti Mälkki
This is not specific to a board but the binary IMC firmware used on the platform. Also remove unused IMSP and IMWK methods. Change-Id: I80026bca55f5ba236c080bcd882fc374559942e6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-25soc/amd/stoneyridge: Move oem_fan_control()Kyösti Mälkki
While at it, replace LibAmdMemFill() with memset(). Change-Id: I770cab446add8f305f02e365e7c9763df88cd958 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21192 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-25amd/pi/hudson: Move oem_fan_control()Martin Roth
It was not intentional to change oem_fan_control() to non-static with commit 23e5ba9 binarypi mainboards: Clean up IS_ENABLED fan control Every platform except bettong had its own static version of oem_fan_control, so remove the definition of oem_fan_control from imc.h, and move it out of imc.c into bettong's BiosCallOuts.c. Change-Id: Ie95ac1fd3a57259bb35796903aa8753ef0e70d70 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21189 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 22:55:36 +0000