summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Expand)Author
2015-04-10google/rush_ryu: Add support for event logFurquan Shaikh
2015-04-10ryu: Enhance pmic access functionsJimmy Zhang
2015-04-10ryu: audio: Enable RT5677 audio codecTom Warren
2015-04-10ryu: Select pwr btn polarity based on board idFurquan Shaikh
2015-04-10gpio: decouple tristate gpio support from board IDDavid Hendricks
2015-04-10gpio: cosmetic changes to tristate_gpios.cDavid Hendricks
2015-04-10rk3288: slowly raise to max cpu voltage to prevent overshoothuang lin
2015-04-10ryu: update board id definitionsAaron Durbin
2015-04-10ryu: remove board id normalizationAaron Durbin
2015-04-10google/storm: Minor board ID changesDan Ehrenberg
2015-04-10storm: Initialize clock, pinmux for NAND if present on boardDan Ehrenberg
2015-04-10gpio: Remove non-ternary tristate mode, make ternaries easierJulius Werner
2015-04-10gpio: Extend common GPIO header, simplify function namesJulius Werner
2015-04-10storm: retrieve MAC address from VPDVadim Bendebury
2015-04-09bg4cd: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-09bg4cd, cosmos: use SPI_WRAPPER configuration modeVadim Bendebury
2015-04-09pistachio: add SOC descriptorVadim Bendebury
2015-04-09pistachio: allow more room for bootblockVadim Bendebury
2015-04-09cosmos: add template for soc and board filesDaisuke Nojiri
2015-04-08rush: Add vboot2 supportFurquan Shaikh
2015-04-08ryu: Add vboot2 supportFurquan Shaikh
2015-04-08t132: Add vboot2 supportFurquan Shaikh
2015-04-08tegra124: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-08ipq806x: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-08rk3288: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-08rk3288: support tsadchuang lin
2015-04-08rk3288: configure l2ctlr in romstagehuang lin
2015-04-08tegra132: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-08rk3288: Add early SRAM mappingJulius Werner
2015-04-07pistachio: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-07exynos5420: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-07exynos5250: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-07broadwell: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-07baytrail: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
2015-04-06global: Refactor get_option usageVarad Gautam
2015-04-05mainboard/lenovo/x201: correct sata_port_mapAlexander Couzens
2015-04-05intel/nehalem: rename copypasted smi finalizer functionAlexander Couzens
2015-04-04rk3288: set cpu frequency up to 1.8GHzhuang lin
2015-04-04veyron_pinky/rk3288: Use KHz, MHz and GHz constantsJulius Werner
2015-04-04samus: Disable USB Port 5Duncan Laurie
2015-04-04samus: Add new memory typeDuncan Laurie
2015-04-04samus: Set codec PDM clock output to 3MHzBen Zhang
2015-04-04samus: Change touchscreen bootloader mode i2c addressDuncan Laurie
2015-04-04samus: Enable GSPI0 interfaceDuncan Laurie
2015-04-04samus: Enable GPIO9 as touchpad wakeDuncan Laurie
2015-04-04samus: Update thermal max for broadwellDuncan Laurie
2015-04-04samus: Assign GPIO2 to HP_AMP_SHDN_LBen Zhang
2015-04-04samus: Make codec interrupt active highBen Zhang
2015-04-04samus: Add codec platform data for jack detectBen Zhang
2015-04-04samus: Change GPIO controller label to INT3437:00Duncan Laurie
2015-04-04samus: Enable update screen for software syncDuncan Laurie
2015-04-04samus: Add smbios_mainboard_version to define board versionDuncan Laurie
2015-04-04samus: Add codec platform info in ACPIDuncan Laurie
2015-04-04Drop (empty) google/snow mainboard directoryStefan Reinauer
2015-04-04rk3288: Pass SPI bus speed in as parameter to init functionDavid Hendricks
2015-04-02pinky: Move some init to mainboard bootblockDavid Hendricks
2015-04-02rk3288/pinky: Move uart address to mainboard KconfigDavid Hendricks
2015-04-02Nyans: replace cpu_reset with hard_resetDaisuke Nojiri
2015-04-02urara: Configure UART line control to 8N1Ionela Voinescu
2015-04-02coreboot: rk3288: add new ddr config and support ddr3 freq up to 800mhzjinkun.hong
2015-04-02rockchip: support pwm regulatorhuang lin
2015-04-02rockchip: support i2c clock settinghuang lin
2015-04-02pinky: Force delay for EC SPI transfersDavid Hendricks
2015-04-02veyron_pinky: Add rev2 support, clean up mainboard.cJulius Werner
2015-04-02veyron: select rw romstage using vboot2Daisuke Nojiri
2015-04-02samus: Fix codec interrupt and add GPIO definesDuncan Laurie
2015-04-02samus: Clean up touch wake sourcesDuncan Laurie
2015-04-02samus: Fix and clean up GPIOs and EC info/eventsDuncan Laurie
2015-04-02samus: Ensure PD controller is in RO mode for recoveryDuncan Laurie
2015-04-02Samus: fix unused GPIO pinKenji Chen
2015-04-02pinky: Enable EC_SOFTWARE_SYNCDavid Hendricks
2015-04-02mainboard/asus/kfsn4-dre: Set maximum installable memory to 64GBTimothy Pearson
2015-04-01mainboard/supermicro/h8qme_fam10: Fix indentations and spellingTimothy Pearson
2015-04-01mainboards/amdfam10: Copy DIMM information to cbmem after romstageTimothy Pearson
2015-04-01mainboards: fix spd generationAaron Durbin
2015-04-01cbfs: correct types used for accessing filesAaron Durbin
2015-03-31cbfs: remove cbfs_core.h includesAaron Durbin
2015-03-30google/veyron_pinky: Don't auto select CHROMEOSAaron Durbin
2015-03-30google/nyan_blaze: Don't auto select CHROMEOSAaron Durbin
2015-03-30Update hex values to CBFS binary name types in MakefilesMartin Roth
2015-03-30emulation/imgvp-pistachio: Drop boardPatrick Georgi
2015-03-29mainboard/asus/kfsn4-dre: Enable BIOS recovery jumperTimothy Pearson
2015-03-28pistachio: don't open code ramstage loadingAaron Durbin
2015-03-28storm: fix SW_RESET signal polarityVadim Bendebury
2015-03-28storm: deassert SW_RESET signal at startupVadim Bendebury
2015-03-28storm: make sure board ID is calculated only onceVadim Bendebury
2015-03-28storm: reset TPM properly on proto0Vadim Bendebury
2015-03-28storm: supply vboot GPIO settings in coreboot tableVadim Bendebury
2015-03-28blaze: update EMC BCT tableNeil Chen
2015-03-28ryu: Add padconfigs for volup and voldown buttonsFurquan Shaikh
2015-03-28rush: ryu: remove mainboard_add_memory_ranges()Aaron Durbin
2015-03-28tegra132/rush/ryu: Use CLK_RST_REG instead of &clk_rst->...Furquan Shaikh
2015-03-28Ryu: Move I2C6 init to ramstageTom Warren
2015-03-28Ryu: Rewrite I2C6 mux initTom Warren
2015-03-28rush: use generic spin table supportAaron Durbin
2015-03-28ryu: use generic spin tableAaron Durbin
2015-03-28rush: Get rid of coreboot setting up DMA areas for libpayloadFurquan Shaikh
2015-03-28ryu: Get rid of coreboot setting up DMA areas for libpayloadFurquan Shaikh
2015-03-28rush: Add cpu devices to devicetreeTom Warren