summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2015-02-12AMD K8 boards’ `romstage.c`: Spell sync*hr*onize correctlyPaul Menzel
Change-Id: I92e6e7f1292f66642aa0336064a4eccba104dd08 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5101 Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-11asus/m4a785/Kconfig: Add vgabios PCI idNicolas Reinecke
The PCI id defaults to 1106,3230 -> via chrome 9 ... Tested on the board. Change-Id: I5ad91faec9c97f34c8ca48eee9198237e9ea8336 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8177 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-11mainboards/asus/kfsn4-dre: Run BSP FIDVID before AP FIDVIDTimothy Pearson
This resolves an issue on Shanghai dual CPU configurations where the APs on node 0 would not start. Single CPU configurations are unaffected by this issue. TEST: Booted KFSN4-DRE with dual Opteron 8389 CPUs and verified proper BSP/AP start and microcode patch levels. Change-Id: I0f5d4e0e356c6bd64e324b4399ef43b400ecab0c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8397 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-10lenovo/x200: Increase default CBFS_SIZE to 2 MiBMichał Masłowski
The original firmware has a 2 MiB BIOS region in both 4 MiB and 8 MiB flash variants. Let's allow using the whole region instead of the gm45 default of 1 MiB. Change-Id: I2d8a04bcb992bf2e8e15890a5c6719810b1cf405 Signed-off-by: Michał Masłowski <mtjm@mtjm.eu> Reviewed-on: http://review.coreboot.org/8392 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-09Intel FSP platforms: Fix timestampsKyösti Mälkki
Now that BROKEN_CAR_MIGRATE is fixed we can stash these in CAR. Change-Id: I49c31b91f34d415778797d08a347a51dbef797e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8024 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-02-08lenovo/t430s: Add new port.Nicolas Reinecke
The port is based on the x230 / t530. Tested - is in active use. Change-Id: Ic5ccfe70343e8aef3465690edce9cdebf153a44d Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8359 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-06mainboards/asus/kfsn4-dre: Indicate native text mode init supportTimothy Pearson
Change-Id: Ib00ecdcad17fa5c0300d22378837e36d0918f9db Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8369 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-05mainboards/asus/kfsn4-dre: Enable native VGA initializationTimothy Pearson
Change-Id: I953ced7d34af9ec0923fa6df93b9ad4270196c77 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8332 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-05newisys/khepri broadcom/blast: Drop duplicate entry in KconfigKyösti Mälkki
Keep the value that is listed first, it also the one with a more recent change. Change-Id: I0336c962544d75f94512563c08f280aa43c7a175 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8336 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-03amd/model_10xxx: Drop AMD_UCODE_PATCH_FILE selectionKyösti Mälkki
Include microcode updates in CBFS for every CPU revision the platform can support, as changing to different CPU revision should not require a coreboot rebuild. This increases CBFS usage from 2 kB to 14 kB. Change-Id: I6bf90221a688f1a54e49641ce3ba378c5bf659f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4521 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-02-01winent/mb6047: switch to CAR version of ck804 early_setup.cJonathan A. Kollasch
Change-Id: I9b45b7fbd862a5600ead7ad4e623a8a87ae364aa Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8319 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-01winent/mb6047: clean up includes in acpi_tables.cJonathan A. Kollasch
Change-Id: I63bdc856fa4232cd66ff2e48e39c2cdb97bb88d3 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8316 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-01winent/mb6047: use correct ACPI SCI interrupt triggerJonathan A. Kollasch
Change-Id: I245c0afb66f3a29b5acb40e8d949d8b1aa08cd73 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8315 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-02-01winent/mb6047: drop inaccurate comment in acpi_tables.cJonathan A. Kollasch
Change-Id: Ib0bb8bed32b96a5f7fd48407bd111972f89e7907 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8314 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-01lenovo/x230: Set xhci_switchable_ports and superspeed_capable_ports.Vladimir Serbinenko
Fixes USB3 ports degraded to USB2 speeds. Change-Id: Ie71c9fb6e52a3e72bb1e61351ad1cc0492d93cbc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/8313 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-01-31asus/kfsn4-dre: Increase maximum logical CPUs for Istanbul devicesTimothy Pearson
Test: Single Opteron 2419 with 1GB RAM in slot A1 Booted Ubuntu Linux 14.04 and verified all 6 cores were visible Brief stress test of all 6 cores simultaneously Verified proper ACPI power states for all 6 cores Change-Id: I1e598e36f9eaed5ba8a18b9c62ceedee16870f15 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8311 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-31mainboard/lenovo/t420s/Kconfig: select NO_UART_ON_SUPERIONicolas Reinecke
same as 37130ebdabe44989787aadeafbe79524970dec75 Change-Id: I73feed3a077dfcc61634147775df1e05fdb97e8b Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8278 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31lenovo/t530/romstage.c: add usb port description and missing oc configNicolas Reinecke
OC2 at port 4 was missing. Verified with RCBA dump. Change-Id: Ide5701d53aeee28619204c7ac408662626aa11e4 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8304 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31lenovo/t5x0: Make version look like something thinkpad_acpi would acceptNicolas Reinecke
thinkpad_acpi checks that BIOS version matches some pattern. Report version in this form. same as http://review.coreboot.org/4650 / 63acd22dc5366c72a7165138f5030df9523824dc Change-Id: I82d7a2b9f2ec56557b3a9c26d1af57ed39e31850 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8302 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-29asus/kfsn4-dre/Kconfig: Enable power on after power fail by defaultTimothy Pearson
Change-Id: I655843c78d31cc69a007ddaf9b51cde063c48c79 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8299 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-28mainboards: Add support for the Asus KFSN4-DRE series of motherboardsTimothy Pearson
Status: Tested with KFSN4-DRE PCB v1.04G Booted Ubuntu Linux 14.04 and all onboard peripherals appear to work. Dual Opteron 8347 CPUs tested with 8GB RAM (4GB per bank). Dual Opteron 8356 CPUs tested with 1GB RAM in slot A1. AMD PowerNow! functions correctly via ACPI. Video, network, USB, SATA, and serial have received thorough testing. Tested with KFSN4-DRE PCB v1.05G Single Opteron 2419 CPU tested with 1GB RAM in slot A1. Booted to PXE configuration menu; not tested further. Known issues: RAM initialization is a bit flaky with multiple high-density modules; this could be a generic MCT training issue but is probably bad hardware. The XGI Volari option ROM crashes SeaBIOS v1.7.5, but the video device works after Linux boots and initializes the device. Suspend/resume functions at the S1 level but sometimes hangs on resume. Wake on LAN can be flaky; the strap(s) needed to have WoL work on power application were not physically installed by ASUS so the board needs to boot at least once after power application before it will work. Change-Id: I0709f822eea8ed877f55db9443143028a5400472 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8270 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-27CBMEM: Always use DYNAMIC_CBMEMKyösti Mälkki
Drop the implementation of statically allocated high memory region for CBMEM. There is no longer the need to explicitly select DYNAMIC_CBMEM, it is the only remaining choice. Change-Id: Iadf6f27a134e05daa1038646d0b4e0b8f9f0587a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7851 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27CBMEM: Do not use get_top_of_ram() with DYNAMIC_CBMEMKyösti Mälkki
The name was always obscure and confusing. Instead define cbmem_top() directly in the chipset code for x86 like on ARMs. TODO: Check TSEG alignment, it used for MTRR programming. Change-Id: Ibbe5f05ab9c7d87d09caa673766cd17d192cd045 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7888 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27CBMEM: Move cbmemc_reinit()Kyösti Mälkki
This replaces need for separate cbmemc_reinit() calls made via CAR_MIGRATE() and in ramstage. Change-Id: If7b4d855c75df58b173f26ef3c90a4a7563166d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7859 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2015-01-27southbridge/amd/pi: Rename Avalon to HudsonDave Frodin
To maintain consistancy with southbridge/amd/agesa/hudson rename pi/avalon to pi/hudson in advance of adding support for the base hudson southbridge. Change-Id: Icff8c4c06aae2d40cbd9e90903754735ac3510c3 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8251 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-01-27vboot2: read dev and recovery switchDaisuke Nojiri
TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=none Branch=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Ia5353018a0db3dae2e0432b7e6a34d46f81b0ffa Original-Reviewed-on: https://chromium-review.googlesource.com/206064 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit b420451c71c86bc27784d920f53870ee56ddc0f2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I30c9f0ac44de0a5816b5b8d0ded2dc7d7e77c7a1 Reviewed-on: http://review.coreboot.org/8162 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-27vboot2: implement select_firmware for pre-romstage verificationDaisuke Nojiri
This patch has a basic structure of vboot2 integration. It supports only Nyans, which have bootblock architecture and romstage architecture are compatible from linker's perspective. TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=None BRANCH=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I4bbd4d0452604943b376bef20ea8a258820810aa Original-Reviewed-on: https://chromium-review.googlesource.com/204522 Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit a6bce0cbed34def60386f3d9aece59e739740c58) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I63ddfbf463c8a83120828ec8ab994f8146f90001 Reviewed-on: http://review.coreboot.org/8160 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-27vboot2: add verstageStefan Reinauer
This reverts the revert commit 5780d6f3876723b94fbe3653c9d87dad6330862e and fixes the build issue that cuased it to be reverted. Verstage will host vboot2 for firmware verification. It's a stage in the sense that it has its own set of toolchains, compiler flags, and includes. This allows us to easily add object files as needed. But it's directly linked to bootblock. This allows us to avoid code duplication for stage loading and jumping (e.g. cbfs driver) for the boards where bootblock has to run in a different architecture (e.g. Tegra124). To avoid name space conflict, verstage symbols are prefixed with verstage_. TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=None BRANCH=none Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Iad57741157ec70426c676e46c5855e6797ac1dac Original-Reviewed-on: https://chromium-review.googlesource.com/204376 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> (cherry picked from commit 27940f891678dae975b68f2fc729ad7348192af3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2a83b87c29d98d97ae316091cf3ed7b024e21daf Reviewed-on: http://review.coreboot.org/8224 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-26rush: Add support for rush boardFurquan Shaikh
Add basic support for rush board BUG=None BRANCH=None TEST=Compiles successfully with soc tegra132 and armv8 arch selected for romstage and ramstage Original-Change-Id: Ica57c68d230e4e0e9916729752395843de188733 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197399 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 06a040dc320d7b04ec0f7e51c1b3987c8f6d80f3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ica57c68d230e4e0e9916729752395843de188733 Reviewed-on: http://review.coreboot.org/8041 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2015-01-19samus: Update indices of ramstage and refcode blobsRandall Spangler
This must be committed at the same time as the corresponding depthcharge change which updates the fmap. BUG=chrome-os-partner:30079 BRANCH=none TEST=Build samus firmware. dump_fmap -h /build/samus/firmware/image.bin shows PD_MAIN_A and PD_MAIN_B sections. Boot samus. 'crossystem mainfw_act' -> A As root, 'crossystem fwb_tries=1' Reboot samus. 'crossystem mainfw_act' -> B CQ-DEPEND=CL:208984,CL:*169850,CL:208989 Original-Change-Id: Ibccec8b82ba22c61248a79023f42b92e4763403e Original-Signed-off-by: Randall Spangler <rspangler@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/208899 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> (cherry picked from commit d241e1dddaf8a435e49e08e60e4ad998735d2137) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ida8f7bd68d71e2a4a47e304b8f8283b566c52837 Reviewed-on: http://review.coreboot.org/8219 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-19samus: Delay bringing SSD out of resetDuncan Laurie
In order to ensure that we meet timing requirements for the SSD power sequencing delay bringing the SSD out of reset until after memory training. BUG=chrome-os-partner:29914 BRANCH=None TEST=build and boot on samus Original-Change-Id: I807e3d3698255287c3fe7219f44e8ec9a0985df1 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/208155 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 1cf557049c49e1ba11ade1eee7a45fc2b075ff3d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib39a14a03e04a167fab45b58b3bc840eb4bcf317 Reviewed-on: http://review.coreboot.org/8215 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-19samus: Disable self refresh and MRC cache on broadwellDuncan Laurie
Add workarounds for power and/or lpddr3 issues on Broadwell SKU. BUG=chrome-os-partner:29787,chrome-os-partner:29117 BRANCH=None TEST=build and boot on samus Original-Change-Id: If99346212c10ad6026250e48bedd916611e2cb8c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/208154 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit c3ee57114315320b542f53645ffb168ad654b756) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie28f3ad65000a627ba64486e0f16493e8101cef3 Reviewed-on: http://review.coreboot.org/8214 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-19samus: Enable keyboard backlightDuncan Laurie
- Turn on keyboard backlight early in boot (not resume) path as a sign of life for the system - Add ACPI device for keyboard backlight so the kernel can find and make use of it BUG=chrome-os-partner:30586 BRANCH=None TEST=build and boot on samus Original-Change-Id: Iecaef0ec5c814774e19d7c4a14cb92dc236cfee3 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/208152 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit e166f76f9bd167468c7637dcce2b9eabf7dce8f0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I47927d97c1586ec09310d014d8fba7d7a3d773c4 Reviewed-on: http://review.coreboot.org/8213 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-19samus: add acpi resource for supporting RT5677 codecKane Chen
Add codec acpi resource for supporting RT5667 codec. BUG=chrome-os-partner:29649 TEST=emerge-coreboot successfully checked codec device is probed Original-Change-Id: I739c0dbfdbfa221b06f99c3d934825b640096c6b Original-Signed-off-by: Kane Chen <kane.chen@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/207707 Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> (cherry picked from commit f9698c45a47efe7fd2a1f5432640f3db5e4bd3f0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib14b27421613d747e02037ecd2311d9966a5d813 Reviewed-on: http://review.coreboot.org/8212 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-17asrock/e350m1: Fix PCIe slot for x4 cardsKyösti Mälkki
Configuration for GNB GPP was incorrect, only PCIe x1 cards worked. Change-Id: I369bf6382080e6034ff138ac664c76b03280ca69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8229 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-16rambi: configure USBPHY_COMPBG by the setting in devicetree.cbKane Chen
USBPHY_COMPBG needs to be configured by project BUG=chrome-os-partner:30690 BRANCH=none TEST=emerge-rambi coreboot without problem checked the USBPHY_COMPBG is configured properly CQ-DEPEND=CL:208557 Original-Change-Id: I8f2714644e1ef5d790d7ef1f574ebb998abbdac6 Original-Signed-off-by: Kane Chen <kane.chen@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/208731 Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit 1e9aeebb769e30940175cf3c38afe7ecfa69b5b4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I28aa445ccb4506db65784e30253dd16161b2bc75 Reviewed-on: http://review.coreboot.org/8217 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-15mainboard/tyan/s2882/irq_tables.c: Remove dead code under #if 0Edward O'Callaghan
Silence unused variable warning. Change-Id: I2671e0843a60e5bd857b233a45ea68715461f187 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8202 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-01-13mainboard/lenovo/x220/gpio.c: Remove unused structEdward O'Callaghan
Change-Id: I25bdee38cedbe38cd447483d3e8b3bdc3f646a62 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8201 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-12mainboard/lenovo/?/Kconfig: select NO_UART_ON_SUPERIOEdward O'Callaghan
These boards don't have Super I/O's, rather they use Embedded Controllers instead. No need to confuse with Super I/O related stuff showing up in menuconfig. Change-Id: I4922319daf7920bf5331b5bce05ded0d9a31a69b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7986 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-01-11mainboard/lenovo/x201/romstage.c: Remove unused functionEdward O'Callaghan
Function was orginally used for reverse engineering. Change-Id: I646dddd39e61b59358b29a49239c0a1de77c7e55 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8158 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2015-01-10ACPI: Add acpi_is_wakeup_s3() for romstageKyösti Mälkki
This replaces acpi_is_wakeup_early(). Change-Id: I23112c1fc7b6f99584bc065fbf6b10fb073b1eb6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8187 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-10Fix mainboard names for daisy and peach_pitDavid Hendricks
This just fixes name members of mainboard_ops for daisy and peach_pit, which were never officially supported but used for development and proof-of-concept. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: Ia1f9b62bc9d91ed634ec1eaa7f907e8aed977f96 Reviewed-on: http://review.coreboot.org/8184 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-10macbook21: Add CST entriesAxel Holewa
Due to the CST entries the machine uses less power running GNU/Linux-libre. This can be seen by monitoring CPU temperature and time left the machine can run on battery. CPU temperature measurements have been done with lm_sensors, battery querying with acpi. Tests have been done before applying this patch and after. In both cases the battery was fully loaded and the machine powered up on battery, without AC. In both tests the machine was idleing for more than 1 hour. Without this patch battery was predicted to last 01:52:30 hours, CPU temperature first measurement showed 38 degrees. After 15 min idle, temperature has reached its maximum value in this test of 61 and 62 degrees (Core 0 and 1). Fan speed begins to increase shortly after 15 min. From its minimal value 1800 rpm it reaches 3100 rpm after 40 min. CPU temperature did not increase any further. After 60 min idle, the battery was predicted to still last 57 min. With this patch battery was predicted to last 02:22:40 hours. That is plus 30 min. CPU temperature begins at 35 degrees. After 15 min temperature has reached 45 degrees; after 30 min it has reached the maximal temperature during this test of about 50 degrees. That is 10 degrees improvement. The fan stayed at minimal speed. After 60 min idle, the battery was predicted to still last 01:22:48 hours; a 25 minute improvement. Change-Id: I6b2173df1dc09300329b61b51b79f4b9f4a8fb13 Signed-off-by: Axel Holewa <mono@posteo.de> Reviewed-on: http://review.coreboot.org/7923 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-09AMD binaryPI 00730F01: Switch to per-device ACPIKyösti Mälkki
Change-Id: Iad31ae3e511c8ebacc973b2d8a8e3bfca719ee7c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7583 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-09samus: Updates from P2 buildDuncan Laurie
- SPD GPIO table was changed from earlier builds and GPIO67 needs to be swapped with GPIO69 - Hynix 8GB DRAM is actually x16 and needs updated geometry in the SPD - Broadwell LPDDR3 at 1333 is not working in P2, remove the workaround - In order to support both P2A and P2B with one firmware image we need to read the EC board version and use the right SPD GPIO for bit3 - Touchpad I2C address changed to 0x4a/0x26 BUG=chrome-os-partner:29502 BRANCH=None TEST=boot on P2A and P2B boards Original-Change-Id: I4af4161449d904b8dd69c1c4f984b2f41f0dbbbc Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/204818 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 9cc71b68be556dab154fdf3f86914129e5f7a6dc) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ic5ca71dbfd9b9d413b86b2ae2786f39fd78ace1d Reviewed-on: http://review.coreboot.org/8135 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-09samus: Enable EC ALS deviceDuncan Laurie
Enable the ACPI Device for the EC ALS. BUG=chrome-os-partner:24208 BRANCH=None TEST=build and boot on samus, add acpi-als driver to the kernel and read /sys/bus/iio/devices/iio:device0/in_illuminance_raw Original-Change-Id: I9e957464f835d5bd96d4806f896ac60db9dea5dc Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/203744 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit a4f78b0b78c53bc0397d9a21dd8f3fa040f41616) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib83d6211d323770c9498180a7721d45e4aefca9d Reviewed-on: http://review.coreboot.org/8133 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-09samus: Updates for P2 boardDuncan Laurie
- RAM ID3 moved to GPIO65 to avoid Top Block Swap strap on GPIO66 - LTE_POWER_ON connection removed BUG=chrome-os-partner:29502 BRANCH=None TEST=none yet, preparing for new board Original-Change-Id: I521fe963cbed57ef5f56cfb0e89aec50bfc48b21 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/203186 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 1eb65e058307a172f0af9c27d2d2d87d1b78c514) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ibf16dcfd83242c487232f34a310c9f6b2cb69314 Reviewed-on: http://review.coreboot.org/8131 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-09storm: Increase DRAM size to 1024MBDavid Hendricks
BUG=chrome-os-partner:29871 BRANCH=storm TEST=builds and boots (sort of) Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I82e1792152d17d689e129c9941e8972221bde366 Original-Reviewed-on: https://chromium-review.googlesource.com/206011 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 8995fde9bdfb8af8fb86525fd67a61614881f78e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ice4a5382903b0ab6e085c39d05c46601373080eb Reviewed-on: http://review.coreboot.org/8148 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-09storm: USB fixes for proto0Vadim Bendebury
The actual storm device has a single USB interface, which needs to be explicitly turned on using GPIO51. BUG=chrome-os-partner:29871 TEST=verified that depthcharge finds and boots a kernel from USB stick Original-Change-Id: Iaf868812c96e1e3289b9403855c4cc8f87c1e368 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/205329 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> (cherry picked from commit aa22376ffac22309a298dfa844e7f61c97d57d3e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ic0f34622e61a65a0540c0f3fca26fb057fa85fb7 Reviewed-on: http://review.coreboot.org/8147 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-09misc: Drop print_ implementation from non-romcc boardsStefan Reinauer
Because we had no stack on romcc boards, we had a separate, not as powerful clone of printk: print_*. Back in the day, like more than half a decade ago, we migrated a lot of boards to printk, but we never cleaned up the existing code to be consistent. Instead, we worked around the problem with a very messy console.h (nowadays the mess is hidden in romstage_console.c and early_print.h) This patch cleans up the generic code pieces to use printk() on all non-ROMCC boards. Our two remaining ROMCC boards are fixed up in this commit: bifferos/bifferboard and dmp/vortex86ex. Change-Id: I16676eeabe5c892c8e3c9f3c0cd3bae2e8fd74b6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8115 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Andrew Wu <arw@dmp.com.tw> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-09src/mainboard: Doxygen fixesMartin Roth
- Remove @param command for #define - this isn't valid. - Rename duplicate @section names - All of the renamed @sections have other @section names in the same file. - Remove blank @brief and @param commands - Doxygen seems to REALLY dislike this... - Add a missing @param name. Change-Id: Iba99ec68b37bbb5c375b7256363d16228031d771 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8175 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-09mainboard/packardbell/ms2290/romstage.c: Comment unused funcEdward O'Callaghan
Take unused reverse eng function out of build by wrapping in #if 0. Change-Id: I816b3ea08a8858fc03e4455c1d7711265e63cba4 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8167 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-09asrock/e350m1, lenovo/x2x0 Kconfig: fix indentationNicolas Reinecke
Change-Id: Ide09e129fd9400eb20f9b7bb3cd0e5d6d271e372 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8176 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-09macbook21 lenovo/xx: Fix inw() in SMI handlersKyösti Mälkki
Missing base may have enabled SMI for all GPI inputs. Change-Id: I1157afaccccb17d325a4efdb1f270a27f9a299ab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8169 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-06mainboard: Drop print_ implementation from non-romcc boardsStefan Reinauer
Because we had no stack on romcc boards, we had a separate, not as powerful clone of printk: print_*. Back in the day, like more than half a decade ago, we migrated a lot of boards to printk, but we never cleaned up the existing code to be consistent. instead, we worked around the problem with a very messy console.h (nowadays the mess is hidden in romstage_console.c and early_print.h) This patch cleans up the mainboard code to use printk() on all non-ROMCC boards. Change-Id: I2383f24343fc2041fef4af65d717d754ad58425e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8111 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06Drop VIA VT8235 southbridgeStefan Reinauer
It's unused. Change-Id: Iad3e7aa0f777392c9d65b9fcdd3c1666af31723a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7883 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-06AMD platforms: fix callout_entry doxygen errorsMartin Roth
Somewhere along the line, the sb_cfg parameter name was changed to config, but this wasn't carried into the documentation or the function prototypes everywhere. Change-Id: Iccb0829c2f50370dddb70af915a6759316c4727a Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8098 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06AMD Mainboards - rd890_cfg.h: fix Doxygen errors.Martin Roth
Doxygen gives an error when processing #defines inside doxygen comments. Normal comments are ignored. The choice for this fix was to make this a standard comment starting with '/*' instead of '/**', or to make the comment not a #define. Change-Id: I97fbbcea6f045d80ec7c0ab5e196d57e5da16d86 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8099 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06AMD Mainboards - rd890_cfg.c: Fix doxygen warningsMartin Roth
Remove variable types from the param declaration. Change-Id: Ia6a3d36fcf01d7a52bb1a31cfdb47d88bf612d79 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8097 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06doxygen fixes: fix parameter names to match the functionsMartin Roth
The doxygen parameter names in the comments no longer matched the functions they were attached to. Doxygen complains about extra parameter comments and uncommented parameters in the functions. Change-Id: I21b8a951f8d8d04b07c3779000eeaf1e69fed463 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8101 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-06Remove AMD's "Release Content" doxygen from coreboot filesMartin Roth
These comments are left over and are not relevent in the coreboot code, but created a new section titled "Release Content" in the doxygen documentation produced by the coreboot code. In an effort to clean up the output, I'm removing these doxygen comments. Change-Id: I4d7be3313a2ab6c140b4f3afe70dffc4abba7bca Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8069 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-06mainboard/*/romstage.c: Fix 'lib/delay.c' inclusionEdward O'Callaghan
Use 'delay.h' header rather than directly including 'delay.c' source. N.B. Some amdfam10 and K8 boards are not included in this changeset since unrelated issues are woven in there. Change-Id: Ibc0c0e560d8eedaf5c3150f95ba72fe5dd8d6f3a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8086 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-06mainboard/*/romstage.c: Sanitize system header inclusionsEdward O'Callaghan
Fix system include paths to be consistent. Chipset support is part of the Coreboot 'system' and hence 'non-local' (i.e., in the same directory or context). One possible product of this, is to perhaps allow future work to do pre-compiled headers (PCH) on the buildbot for faster build times. However, this currently just makes mainboard's consistent. Change-Id: I2f3fd8a3d7864926461c960ca619bff635d7dea5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8085 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-06superio/smsc/lpc47n207: Hook into build systemEdward O'Callaghan
Provide proper Makefile and Kconfig components so that this superio is built as object code. Select superio component in mainboard Kconfig's to bring in the link-time symbols and thereby removing the need for .c inclusion. N.B. The LPC47N207 Super I/O does not physically exist on these boards. The Super I/O is found on external LPC debug card hardware and so should really be made selectable. However, this is beyond the scope of this specific fix, that rids us of .c inclusions in romstage.c Change-Id: I451c3a81c4b5beca1ed65e27467a7393d2521dae Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8084 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-01-05timestamps: Switch from tsc_t to uint64_tStefan Reinauer
Cherry-pick from chromium and adjusted for added boards and changed directory layout for arch/arm. Timestamp implementation for ARMv7 Abstract the use of rdtsc() and make the timestamps uint64_t in the generic code. The ARM implementation uses the monotonic timer. Original-Signed-off-by: Stefan Reinauer <reinauer@google.com> BRANCH=none BUG=chrome-os-partner:18637 TEST=See cbmem print timestamps Original-Change-Id: Id377ba570094c44e6895ae75f8d6578c8865ea62 Original-Reviewed-on: https://gerrit.chromium.org/gerrit/63793 (cherry-picked from commit cc1a75e059020a39146e25b9198b0d58aa03924c) Change-Id: Ic51fb78ddd05ba81906d9c3b35043fa14fbbed75 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8020 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-01-05hp/abm: Add new mainboardDave Frodin
The hp/abm board is used in network/server applications. Notes: - The hp/abm board is headless and therefore does not define CONFIG_GFXUMA, and does not require a video bios. - The micro USB connector on the board edge is connected to COM4 (i.e. I/O=2E8h). Coreboot needs to be configured to use Index=3. - If you are using SeaBIOS it would also need to be configured to use the UART at I/O=2E8h. - This board has been tested with headless installed versions of Ubuntu 12.10 and Fedora 19. Change-Id: I60bde98411c40a184c8d053199bac8d04df8ab07 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6116 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2015-01-05Copy asrock/ibm-a180 to hp/abmKyösti Mälkki
Change-Id: I8dcb3912976d7381421dc41ee30e7c7652e6c28a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6115 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2015-01-04AMD Mainboards - romstage.c: Fix doxygen errorsMartin Roth
- Remove types from the param declarations. - list needed to be uppercase. Change-Id: I8b9ed78908e5d3e1d99e7ba2ea9013be109b8e27 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8072 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-04AMD Mainboards - PlatformGnbPcie.c: Fix Doxygen errorsMartin Roth
Remove PeiServices param for OemInitEarly - it doesn't exist in the function. Change-Id: I338aeb4128126f6e541815dc09bf8d23678081c8 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8073 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-04AMD Mainboards - platform_cfg.h: Fixes for doxygenMartin Roth
- Move @def BIOS_SIZE description to the next line - SB_GEN2 changed to SB_GPP_GEN2 - Move the SIO_HWM_BASE_ADDRESS description to the next line Change-Id: Ia3496b0108484f557627304553461932a100dfa5 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8071 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-04superio/smsc/lpc47b272: Use link-time symbols over .c inclusionEdward O'Callaghan
Change-Id: Id3d5f2a120c0a933c031102f206829305da20f0c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8081 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-04superio/smsc/lpc47m10x: Use link-time symbols over .c inclusionEdward O'Callaghan
Change-Id: I4a3639c05231eacd016ec3873330f9844befd448 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8080 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-04superio/smsc/lpc47b397: Use link-time symbols over .c inclusionEdward O'Callaghan
Change-Id: I344f2a8d2ae5f6f3fa04d79773ee1c59de69e425 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8079 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-01-04superio/nsc/pc87417: Use link-time symbols over .c inclusionEdward O'Callaghan
Change-Id: I2efb7ab4b69bcd127b2faf54277dc229c9dcf3ea Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8078 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-01-04superio/nsc/pc87366: Use link-time symbols over .c inclusionEdward O'Callaghan
Change-Id: Id156ca3c9a14c5bcc4d6cdb8434ca8efdac3139a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8077 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-04superio/nsc/pc97317: Use link-time symbols over .c inclusionEdward O'Callaghan
Change-Id: Ia45bc7a880d0dab57c56a0452858cd26626f09df Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8076 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-04superio/intel/i3100: Use link-time symbol over .c includesEdward O'Callaghan
Change-Id: I83db9b189e672b0e1f25bc42b73639c375bea3e5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8054 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-04superio/nsc/pc87360: Use link-time symbol over .c includesEdward O'Callaghan
Change-Id: Id6d9efc93fdaff63dcaab50712ac9be35ccb42a7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8053 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-04mainboard: Sanitize some superio include paths to be non-localEdward O'Callaghan
This brings mainboard up to being consistent tree-wide now for all superio header path inclusions. Change-Id: I00a806ce209ba363c62e3ddd49db9bf599f32149 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8052 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-04ipq806x: Add USB supportJulius Werner
This patch adds code to initialize the two DWC3 USB host controllers and their associated PHYs to the IPQ806x SoC (closely imitating the existing DWC3 implementation for Exynos5), and uses them to initialize USB on the Storm mainboard. BUG=chrome-os-partner:29375 TEST=Hack up netboot to get around missing SPI flash, load a file over TFTP. Hack a storage read into the storage attach function, dump the data and confirm that it looks right. Enable USB debugging and confirm 3.0 devices get enumerated at SuperSpeed (mostly). Original-Change-Id: Iaf7b96bef994081ca222b7de9d8e8c49751d3f1d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202157 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> (cherry picked from commit 6349e7281d5accb1247acb0537a48fa3a5e1bf97) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I749d265d45c6a807a7559bd4df2490a6eb8067af Reviewed-on: http://review.coreboot.org/8056 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04nyan_big: Update Hynix BCTs and add Kingston 2GB BCT.Tom Warren
Hynix 2GB/4GB configs have been fine-tuned. Kingston 2GB config is new, uses RAMCODE 0x6. BUG=none TEST=emerge-nyan_big coreboot-nyan_big OK. Flashed to my Big 2GB system (PVT1/SKU1) and it booted OK. BRANCH=nyan_big Original-Change-Id: I8a23a5568ef84d5befc13623f78bce664130f314 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/203305 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit e47d18d8cff50f46d0a14715b6750f7aa6d0da82) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I363db37d6a63d9f5c578e68a0149259657e1ebfd Reviewed-on: http://review.coreboot.org/8045 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04nyan: Ignore the recovery GPIO.Todd Broch
CrOS devices with Chromeos EC need only use hostevent to communicate recovery assertion to the BIOS. This CL removes wired GPIO from determining recovery as it appears under certain conditions (cold reset) the internal PU on the AP isn't strong enough and therefore the value is sometimes seen as asserted. BRANCH=none BUG=chrome-os-partner:29333 TEST=compiles & BIOS no longer responds to rec_mode GPIO during boot. Original-Change-Id: Ib220cfa5f5bfe7193d555bfd32c0444b063d00f2 Original-Signed-off-by: Todd Broch <tbroch@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202996 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit d9927bcd67b0fb069fde231314e654d727092282) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6e086cbabc884f18deb2791a0f897e332b31032f Reviewed-on: http://review.coreboot.org/8042 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04samus: Minor fixes for P1.9 boardsDuncan Laurie
- Put SSD into reset on transition to S3/S5 to prevent leakage - Fix GPIO number for wlan disable used in smihandler - Enable generic hub driver in libpayload - Fix comment in devicetree about S0ix BUG=chrome-os-partner:28502 BRANCH=None TEST=Build and boot on samus Original-Change-Id: Idce566d0f22622d36697be54ab51cacb576c5d6d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/203185 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit c0dd822babee3d766eff1735687d14e63380f702) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Idc2da99fce817aaf893f031ffbb4ac4a2ade31b0 Reviewed-on: http://review.coreboot.org/8048 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04wtm2: Fix issues with USB in firmwareDuncan Laurie
XHCI driver was not enabled in libpayload and some ports were disabled that should be enabled. The Chrome OS GPIOs also need to be reported as 0xFFFFFFFF to properly indicate unused so crossystem does not attempt to export GPIO number 255 in the kernel and trigger a warning. BUG=chrome-os-partner:28234 TEST=Build and boot on wtm2 Original-Change-Id: Ib5727ef6e618c959640b200757cfa13f95c7cb0f Original-CSigned-off-by: Duncan Laurie <dlaurie@chromium.org> Original-CReviewed-on: https://chromium-review.googlesource.com/203184 Original-CReviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 328362469b00c9467908a7d18a031fee73753def) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I91ef865c44d3c73b0d74c9eaf1fbf2fb5e894434 Reviewed-on: http://review.coreboot.org/8047 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-01-04samus: Enable DDI2 hotplugDuncan Laurie
Both DDI ports may be used on this board so it needs to be able to detect a device on either port. BUG=chrome-os-partner:28234 TEST=None (needs hardware) Original-Change-Id: I5fc5ec3fe887fb51e7bdeae43c8297580e0ba6d6 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202358 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 574bb6ac5d33c98f0214d6c738af24172164f4a1) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I57613fcea10af0fecaf0f2ad6a83ca011c650099 Reviewed-on: http://review.coreboot.org/8046 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-01-04samus: Update for board revision 1.9Duncan Laurie
- Update GPIO map - Update SPD for new memory and 4-bit table decode - Enable USB3 port 3 and 4 (shared with PCIe port 1) - Enable PCIe port 3 and disable port 1 - Enable SerialIO ACPI mode for devices - Disable S0ix for now to prevent use of C10 - Special handling for memory with broadwell CPU BUG=chrome-os-partner:28234 TEST=Boot on P1.9 Original-Change-Id: If6adcc2ea76f1af7613b715133483d7661e94dd8 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/201083 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 35835eaed3e098597e46f602fbd646cfbb899355) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Icb03808da6d92705bbc411d155c25de57c4409c6 Reviewed-on: http://review.coreboot.org/8007 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04samus: Move SPD related information to spd directoryDuncan Laurie
Put all the SPD related information in one place including the onboard SPD sources and the board specific parsing. BUG=chrome-os-partner:28234 TEST=Build and boot on samus Original-Change-Id: If5cd826ecc9cc856008b7c29aa3cfade5ae7f685 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/201082 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit f40e447cee84ebd04ab8a57250d0f56f508d52f2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9c10b08c3e640642e3c75696a233051bb34a2123 Reviewed-on: http://review.coreboot.org/8006 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04wtm2: Convert to use soc/intel/broadwellDuncan Laurie
Convert wtm2 board to use the broadwell soc chipset. BUG=chrome-os-partner:28234 TEST=Build and boot on wtm2 with haswell and broadwell CQ-DEPEND=CL:201067 CQ-DEPEND=CL:*164226 Original-Change-Id: Ifb0db15cc23a3b66430b32b2ad3f8ab2fb03c4c3 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/201070 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit e1073c6e34ab2d436faf46dde5f6b3bf99692866) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I925b91a8de980b1768f03eaee915a7fd91fbdbda Reviewed-on: http://review.coreboot.org/8001 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-03ARMv7: Always has DYNAMIC_CBMEMKyösti Mälkki
The static allocator only worked for x86 anyway. Change-Id: I0d2b63465620512e62334d7aa0c885fc5ab3e589 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8030 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-03mainboard/storm: setup mmu in storm mainboard_initDeepa Dinamani
enable protection of zero page access, provide for uncached device memory range, and protect against access outside of DRAM except to device registers. BUG=chrome-os-partner:28467 TEST=verified mmu.pagetable.list output: _______address___________|_physical________________|sec|_d_|_size____|_permissions____________________|_glb|_shr|_pageflags______________________| C:00000000--000FFFFF| | | | | | | | | C:00100000--3FFFFFFF| A:00:00100000--3FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:40000000--428FFFFF| A:00:40000000--428FFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc | C:42900000--43CFFFFF| A:00:42900000--43CFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:43D00000--5FFFFFFF| A:00:43D00000--5FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc | Original-Change-Id: If9beb10938841aead5105d662f0aef741995d708 Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/200341 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> (cherry picked from commit 09dd137453d8c6f1b60692b01226498e22f34fb2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Conflicts: src/mainboard/google/storm/mainboard.c Change-Id: Idff7e3f0bc5903933e9f1b980f595666380696d1 Reviewed-on: http://review.coreboot.org/8010 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-03storm: enable early consoleVadim Bendebury
Include the required modules in romstage and enable early console. BUG=chrome-os-partner:27784 TEST=observe the romstage prompt in the console output: coreboot-4.0 romstage Tue May 13 17:08:58 PDT 2014 starting... Original-Change-Id: Ie3853b9afc53246e6eb997f279ccd4dbb08f748b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199673 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 6e643d3425ee226b3ebfbf329b35e7017f83d0c3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ibdc695da634356988b3e551b0a9e4be2e129ccb4 Reviewed-on: http://review.coreboot.org/7997 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-03storm/ipq8064: add dynamic CBMEM supportVadim Bendebury
Squashed the correction patch with the original to avoid confusion in coreboot.org review. All what's needed apart from configuring the feature is to provide a function which would report the top of DRAM address. BUG=chrome-os-partner:27784 TEST=manual . with all other patches applied, the image proceeds all the way to trying to download 'fallback/payload'. Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Change-Id: Ifa586964c931976df1dff354066670463f8e9ee3 Original-Reviewed-on: https://chromium-review.googlesource.com/197897 (cherry picked from commit 54fed275fe80dee66d423ddd78a071d3f063464a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> storm: initialize dynamic cbmem properly Dynamic cbmem support has been enabled on storm, but the proper initialization at romstage is missing. Proper DRAM base address definition is also necessary so that CBMEM is placed in the correct address range (presently at the top of DRAM). BUG=chrome-os-partner:27784 TEST=build boot coreboot on ap148, observe the following in the console output: Wrote coreboot table at: 5fffd000, 0xe8 bytes, checksum 44a5 coreboot table: 256 bytes. CBMEM ROOT 0. 5ffff000 00001000 COREBOOT 1. 5fffd000 00002000 Original-Change-Id: I74ccd252ddfdeaa0a5bcc929be72be174f310730 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199674 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit e2aeb2f4e7f3959d5f5336f42a29909134a7ddb7) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I45f7016dd510fe0e924b63eb85da607c1652af74 Reviewed-on: http://review.coreboot.org/7996 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-03lenovo/t420s: Add new port.Nicolas Reinecke
This is based on x220 and t520. Tested on i7 model with usb3. There is no support for nvidia gpu and optimus. Change-Id: I6ca9436ccec3024095d02078e5e450147841e463 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/7974 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-01-03blaze: change ramcode 1000/1001/1010 to use 792MHz bctNeil Chen
This change updates the cfg file for Hynix/Micron/Samsung 4GB, 792MHz DRAM based on the data generated by t124_emc_reg_tool. BUG=none BRANCH=blaze TEST=emerged coreboot, booted successfully into kernel. Original-Change-Id: I7621e60d8dcc568e0bb400a6c96b7f8909a15aa6 Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/202059 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit 04e74d2fb0fefa6a1786225638380c8831bd9481) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6615e34a17bb372eda9dd0844ecddbcde902ad7c Reviewed-on: http://review.coreboot.org/8008 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2015-01-03storm: ipq8064: enable CBFS SPI wrapperVadim Bendebury
This change forces storm platform to use the common CBFS SPI wrapper, which makes the SOC specific CBFS code unnecessary and requires including SPI controller support in all coreboot stages. BUG=chrome-os-partner:27784 TEST=manual . with this change and the rest of the patches coreboot on AP148 comes up all the way to attempting to boot the payload (reading earlier stages from the SPI flash along the way). Original-Change-Id: Ib468096f8e844deca11909293d90fc327aa99787 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197932 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 794418a132b5be5a2c049f28202da3cec7ce478d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I751c51c91f29da4f54fcfe05e7b9a2e8f956c4f2 Reviewed-on: http://review.coreboot.org/7994 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-01mainboard/lenovo/t530/Kconfig: Enable VMX by defaultEdward O'Callaghan
Fix a trivial tab/space indent inconsistency while here. Change-Id: I819d85293e1a070817cd13349a220ba85ba89951 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7984 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-12-31samus: Combine mainboard patches to build soc/intel/broadwellDuncan Laurie
Combine four patches dependencies. These will not build individually, so combine them for coreboot.org upstream. samus: Move SPD handling to separate file The code to find the SPD data for the mainboard based on GPIOs is moved from romstage.c into spd.c. It relies on the updated pei_data structure from broadwell instead of the haswell interface. BUG=chrome-os-partner:28234 TEST=Build and boot on samus CQ-DEPEND=CL:199921 CQ-DEPEND=CL:199922 CQ-DEPEND=CL:199923 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: I5bd56f81884dae117b35a1ffa5fb6e804fd3cb9c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199920 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 0bd2de4ba5eb8ba5e9d43f8e82ce9ff7587eab62) Signed-off-by: Marc Jones <marc.jones@se-eng.com> samus: Move PEI data structure init to separate file This needs to be executed in both romstage and ramstage for the different PEI binary stages. It uses the broadwell interface now instead of haswell. BUG=chrome-os-partner:28234 TEST=Build and boot on samus CQ-DEPEND=CL:199920 CQ-DEPEND=CL:199922 CQ-DEPEND=CL:199923 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: Ida05bd17b9e54f08ed0e2767361c9301a2e97709 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199921 (cherry picked from commit 89f98a27ea561ec63e716b1f6446d92822a6a5de) Signed-off-by: Marc Jones <marc.jones@se-eng.com> samus: Convert mainboard to use soc/intel/broadwell Switch from the haswell cpu/northbridge/southbridge interface to the soc/intel/broadwell interface. - Use new headers where appropriate - Remove code that is now done by the SOC generic code - Update GPIO map to drop LP specific handling - Update INT15 handlers, drop all but the boot display hook BUG=chrome-os-partner:28234 TEST=Build and boot on samus CQ-DEPEND=CL:199920 CQ-DEPEND=CL:199921 CQ-DEPEND=CL:199923 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: I56f3543612e89e2cdb4256b1bcd4279f5546b918 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199922 (cherry picked from commit 715dbb06e9f79d1ec3647330311c45aa29362375) Signed-off-by: Marc Jones <marc.jones@se-eng.com> samus: Add some code to print basic info from SPD The handling of LPDDR is a bit messy in Intel platforms. There is no traditional SPD so instead one is created by hand from the provided datasheets. These have varying (and sometimes unexpected) geometry and it can be important during bringup to know what configuration is being passed to the memory training code. This could in theory be put in a more generic location, but for now this is the only board with LPDDR3 where I have found it valuable. BUG=chrome-os-partner:28234 TEST=Build and boot on samus, look for SPD details on the console. CQ-DEPEND=CL:199920 CQ-DEPEND=CL:199921 CQ-DEPEND=CL:199922 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: Ibce0187ceb77d37552ffa1b4a5935061d7019259 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199923 (cherry picked from commit 3f36348dd7abc67048407f181065f1a99b3d0dab) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1d19dffbd0b2e838d1946670a0bee9f8e121869d Reviewed-on: http://review.coreboot.org/7943 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-31ipq8064/storm: UART enable and various fixesVadim Bendebury
The original patch from chromium was a bit of a mishmash. Between that, rebasing and using the coreboot.org UART infrastructure, the patch has changed a bit from the original. It seems reasonable to keep these changes together. - build in the ipq UART and turn on bootblock console - sets LPAE and ROM header address - adds cpd.c to storm The original commit: ipq8064: make UART driver work in bootblock This patch it the last one in the chain adapting the ipq9064 UART driver for use in coreboot. A new config option (CONSOLE_SERIAL_IPQ806X) is being introduced to control inclusion of the driver. The previously introduced uart_wrapper.c is now included in the build to provide the console driver structure used by ramstage. Necessary configuration options are added to allow use of UART in the bootblock. BUG=chrome-os-partner:27784 TEST=with this change the coreboot image on AP148 prints a banner on start up: coreboot-4.0 Wed Apr 23 16:24:51 PDT 2014 starting... Original-Change-Id: I129ee30ba17a5061b30cfee56c135df31eba98b5 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196663 (cherry picked from commit 42ca8994361327c24e7a611505b21534dd231f30) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1175e74ed639cdc27a1a677fba65de2dd2b13a91 Reviewed-on: http://review.coreboot.org/7875 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-31nyan*: Set GEN2 I2C pads to open-drain modeKen Chang
The VDDIO to GEN2 I2C SCL/SDA pins is 1.8V and the external pull-up voltage is 3.3V (the external 3.3V > I/O 1.8V) thus the pinmux E_OD bit of these two pins needs to be set to ensure GEN2 I2C pads work fine on 3.3V. BRANCH=nyan BUG=none TEST=observed voltage drop from 3.3V to 2.36V on gen2 i2c on blaze w/o this change. the waveform looks good on both scl/sda pins w/ this change. Original-Change-Id: I1b97f0c9c7580d1e532c3bdf7ac8690241ee7ee3 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/200996 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 2db39166ec525e56a19746f38a867305a2687365) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I0c84eade89311baf0a6f180cb5cc9e2145f6b7ea Reviewed-on: http://review.coreboot.org/7952 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-31rambi: Add _PRW for LID0 ACPI DeviceShawn Nematbakhsh
The kernel will not track wakeup events for devices unless they have a defined _PRW. There is no EC output of the lid signal coming to a GPIO and instead it pulses PCH_WAKE#. BUG=chrome-os-partner:27631 TEST=Manual on Rambi. - Run lidclose + lidopen on EC console, verify that wakeup_count increments. - Run lidclose + lidopen in rapid succession, verify that suspend request is aborted. BRANCH=Rambi. Original-Change-Id: I8d4c58a7bb37d7e474ec094fe96e46e1bfd980de Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/200289 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> (cherry picked from commit 08c6b42f1ed1af7fff6217e6b71469edd7ff4b2e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Iee813ed6f39cd3d5e0a2bdd395c740f82a1cf01a Reviewed-on: http://review.coreboot.org/7945 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 14:38:51 +0000