summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-12-08mb/google/reef: provide override GPIO table in coralChris Wang
Allow overriding specific GPIOs by SKU ID. Override two GPIO settings for nasher to save the power consumption when the system in S0ix. Change as below: AVS_DMIC_CLK_A1: IGNORE -> Tx1RXDCRx0. AVS_DMIC_CLK_B1: IGNORE -> Tx1RXDCRx0. BUG=b:69025557 BRANCH=master TEST=compile/verify the power consumption change from ~150mW to ~100mW on clamshell SKU and from ~200mW to ~100mW for convertible SKU. Change-Id: I9e0674f206426fddb3947273754774b310106334 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-12-07mainboard/intel/glkrvp: Change gpio configuration for eSPIBora Guvendik
Skip LPC related gpio configuration if eSPI config option is selected. Change-Id: I15c5f769f36a1801217b1e3650379c7b181d814f Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22757 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07google/scarlet: update Kingdisplay kd097d04 timingLin Huang
With the old timing, the hblank time isn't large enough, it may cause display artifacts. So fix it. BUG=b:70160653 TEST=panel work on Scarlet rev2 board Change-Id: Ib061f5e215611d20f59e3f24cfe3c7fbc507ebed Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-12-07asus/p2b-ls: Disable SuperI/O ACPI logical deviceKeith Hui
This logical device is disabled in OEM BIOS. Disable here to match, since its support is currently incomplete anyway. Change-Id: I5c07136ec6a14a8ee8cb68537a2663b78fc0fa20 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/22145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-07asus/p2b: Align ACPI tables with asus/p2b-lsKeith Hui
Updates ACPI tables with work done for asus/p2b-ls, including super I/O related declarations. Change-Id: Id2420da4ab04aa5f59ac0aa237d21477a03b826e Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/22473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-07asus/p2b-ls: Add ACPI tablesKeith Hui
Add ACPI tables support that will be needed for soft-off and S3 resume in the future. Boot tested for soft-off. Change-Id: I28b559406bd53efc555dcbb8282dfe2bd6d1af87 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-07kahlee/ec.c: Use new wide IO functionRichard Spiegel
In preparation to deleting early_setup,c, change early_ec_init() to use new southbridge.c function sb_set_wideio_range and remove <#ifdef __PRE_RAM__>. BUG=b:64033893 TEST=Build, boot and check serial output, search for "Covered by wideIO xx", which should match earlier message "Range assigned to wide IO xx" generated within modified early_ec_init(). Change-Id: Iaea17f4f636aab6bd8b05b1b3bed53a677164e74 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07mb/google/poppy/variants/nami: Add support for nami boardFurquan Shaikh
This change adds variant nami derived from baseboard poppy. BUG=b:70160119 Change-Id: Ic6795d49d3e6e98a32f4af0b621e8bb463041412 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07mb/google/poppy: Add support for DDR4 memoryFurquan Shaikh
This change updates memory SPD handling code in baseboard poppy to allow variants to define either LPDDR3 or DDR4 memory types. In addition to that, it also updates the function to print SPD info considering offsets that might be different across the two memory types. BUG=b:70188937 Change-Id: Iefad01719c62264fb0d7e987904e77647d6026c2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07mb/google/poppy/variants/nautilus: Fix memory paramsFurquan Shaikh
Until now, nautilus was using the DQ-DQS mappings provided by the baseboard. However, based on schematics, these values are not correct. This change adds DQ-DQS mapping tables for nautilus. BUG=b:70188533 Change-Id: Ife6ba19b8fe8873ab8cca977ca8f34a4d86e8e6e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22706 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: shkim <sh_.kim@samsung.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07mainboard/intel/glkrvp: Ignore Audio DMIC IOSSTATESathyanarayana Nujella
Audio DMIC_CLK needs to be ON in S0ix to support Wake on Voice. So, configuring GPIO_171 to be as IGNORE IOSSTATE, so that clock is ON in S0ix state. BUG=None TEST=put DUT in S0ix, verified DMIC_CLK in scope when wov capture path is ON Change-Id: I147cf3c12acb11429c6cb234e8c511f57886b6b4 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/22675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07google/gru: Add SKU ID for ScarletJulius Werner
Scarlet has SKU detection strapping pins now. This patch adds the code to read them. BUG=b:69373077 Change-Id: I8d889a845950923bc7b5be9b79792cf3c8b6b8ad Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22697 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07boardid: Switch from Kconfig to weak functionsJulius Werner
This patch switches the board_id and ram_code helper framework to use weak functions rather than Kconfigs to determine whether the board supplies these IDs. This cuts down on the amount of boilerplate Kconfigs many boards have to set and also gives them more flexibility, such as being able to determine at runtime whether a given ID is present. Change-Id: I97d6d1103ebb2a2a7cf1ecfc45709c7e8c1a5cb0 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22695 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07boardid: Minor clean up and standardizationJulius Werner
Merge the different coreboot table strapping ID structures into one because they're really just all the same, and I want to add more. Make the signature of the board_id() function return a uint32_t because that's also what goes in the coreboot table. Add a printk to the generic code handling strapping IDs in ramstage so that not every individual mainboard implementation needs its own print. (In turn, remove one such print from fsp1_1 code because it's in the way of my next patch.) Change-Id: Ib9563edf07b623a586a4dc168fe357564c5e68b5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-06Kconfig: Remove BOARD_ID_MANUAL optionJulius Werner
The BOARD_ID_MANUAL and BOARD_ID_STRING options were introduced for the Urara board which is now long dead, and have never been used anywhere else. They were trying to do something that we usually handle with a separate SKU ID these days, whereas BOARD_ID is supposed to be reserved for different revisions of the same board/SKU. Get rid of it to make further refactoring of other options easier. Also shove some stuff back into the Urara mainboard that should've never crept into generic headers. Change-Id: I4e7018066eadb38bced96d8eca2ffd4f0dd17110 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22694 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-06mb/*/*/Kconfig: Remove default MMCONF_BASE_ADDRESS on Sandy BridgeArthur Heymans
Change-Id: I6f0d6d7fefc77fb05cdb629d09de8cb72496a9cc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-12-06mb/google/poppy: Remove variant_cros_gpios from variantsFurquan Shaikh
Variants nautilus and soraka currently provide the exact same definition for variant_cros_gpios as provided by the baseboard. This change removes the function defintions from variants so that the weak definition in baseboard can be used. Change-Id: Ic88623f34039792f0f9fb46842b24e4f1290981b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22705 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-06mb/google/poppy: Add config option for camera ACPI supportFurquan Shaikh
This change adds a new config option VARIANT_HAS_CAMERA_ACPI to allow variants to define ACPI tables for camera support. It also prevents boards that do not need this from unnecessarily providing dummy files for camera ACPI support. Change-Id: I91f8e407e0f021071eeadbde8c2695e2a6d69e06 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06mb/google/poppy: Change POPPY_USE_* to VARIANT_HAS_*Furquan Shaikh
Change the prefix for TPM options from POPPY_USE_* to VARIANT_HAS_*. This makes it clear that these are variant specific options. Change-Id: I6fd120a34a5b0c1f018164d5c2b60548da1d0f61 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06mb/google/poppy: Introduce VARIANT_SPECIFIC_OPTIONS_*Furquan Shaikh
In order to allow variants to select different Kconfig options, this change adds VARIANT_SPECIFIC_OPTIONS_${VARIANT_NAME} which can be selected by each variant in Kcnonfig.name. Change-Id: I15db2fdac5c9e55f9698c8a0c083d6467afae245 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06mb/google/poppy: Remove dynamic disabling of TPMFurquan Shaikh
This change removes the dynamic disabling of TPM based on config options. Poppy and its variants will have only one type of TPM supported and so there is no need to update it dynamically. Change-Id: Ie82825fcf7092e845583edaac9ba0d3fc9d1dd80 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22704 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-06mb/google/poppy/variants/soraka: Disable SPI TPMFurquan Shaikh
Soraka is no longer using SPI TPM. This change disables GSPI0 in device tree and updates gpio config accordingly. Change-Id: Ia0554ce3a0d553631123cc2b23b6dc2f6f40a1a3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06mb/google/poppy: Disable SPI TPMFurquan Shaikh
Mainboard poppy is no longer using SPI TPM. This change disables GSPI0 in device tree and udpates gpio configuration accordingly. Change-Id: I713e41c45e323bf13aa79412ec679c90121a52b2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06google/kahlee: Set USB OC pinsMarc Jones
Set the USB over current pins for the Grunt baseboard and Kahlee mainboard. Removes the ACPI ASL OC code, which is not used on Stoney Ridge SOC. BUG=b:69229635 TEST=Build and boot Kahlee. Not tested with OC test fixture. Change-Id: I5a9b3409d9c91b89fd02f8eecf9e04c435f14342 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-05google/gru: update RAMID tableLin Huang
There is some confusion with old RAMID table, make it clear, and let's no longer tangle it in future. Change-Id: I44215b4a6668074575a5df691ac1ff8fa3d15492 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-12-05mb/google/poppy,nautilus,soraka: Disable PD on AC_PRESENT in deep SxFurquan Shaikh
This change updates device tree deep_sx_config to disable internal pull-down on AC_PRESENT. BUG=b:69983729 Change-Id: I041900a5262f8fd920856f126185329242a0639a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-05mb/hp/8460p: Add TPM supportBill XIE
After applying this change, /dev/tpm0 is visible inside GNU/Linux with kernel 4.9.51-1 from Debian, and there is a menu item shown inside SeaBIOS' (master only) interface if ESC is pressed. The TPM is confirmed working with [Heads](https://github.com/osresearch/heads). Change-Id: I3b845928954d203d1c3608b6704fedbd590e1fa9 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/22602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-04mb/google/fizz: Enable Wake-on-Lan featureGaggery Tsai
This patch enables WOL feature. BUG=b:69290148 BRANCH=None TEST=powerd_dbus_suspend && sudo etherwake -i eth0 $MAC to make sure the system could be woken up by WOL packet. Change-Id: I1178a776db2cdb448fe6650d49ae6c0281ac1128 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-02google/reef: Fix whitespace inconsistency in coral codePatrick Georgi
BUG=none BRANCH=none TEST=none Change-Id: I4e61f1327027c5100773e2b837f439a939807e72 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-02google/reef: add more USB tuning for coral variantsPatrick Georgi
Lava numbers are in. BUG=b:69990330 BRANCH=none TEST=verified that USB signal is within spec Change-Id: I7416ec8d058271700ebe43f8d92af61c6c0d6b42 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quantatw.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-02mainboard/google/kahlee: Remove usb_oc.asl filesMartin Roth
These files aren't needed for the overcurrent functionality. BUG=b:69305596, b:69229635 TEST=Build Grunt & Kahlee. Overcurrent wasn't yet enabled so no other testing was needed. Change-Id: I8dcd50a249e387ccf1142949b359cee09942460a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-02mainboard/google/kahlee: Add Baseboard GPIOsMartin Roth
Add initial baseboard GPIOs based on grunt schematics. BUG=b:69305596 TEST=Build grunt Change-Id: I4efcee7dbf54fb9ea82e5e9394db805bb69203c8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-01mainboard/google/kahlee: Update Kconfig string used in makefilesMartin Roth
Update the variable ${CONFIG_VARIANT_DIR} to use parens instead. Either is valid, but since we use parentheses everywhere else, it's better to be consistent. BUG=b:69691210 TEST=Build grunt & kahlee Change-Id: Ieffabaae5516a893f1dc1f7195a17c4cdeae8853 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22656 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-30mb/google/poppy/variants/nautilus: Disable DPTFFurquan Shaikh
This change disables DPTF until the support is properly added in dptf.asl Change-Id: I68f2442e00718a4edbb34661d31d3a415d41c29f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-11-30mainboard/google/fizz: Disable DPTF active policyDavid Wu
Use EC to perform FAN control. BUG=b:67487721,b:69404739,b:64439568 BRANCH=master TEST=emerge-fizz coreboot and boot on fizz dut Change-Id: I3394d3af9cbdb3eab1f18254909f60e2704735c3 Signed-off-by: David Wu <david_wu@quantatw.com> Reviewed-on: https://review.coreboot.org/22481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: TH Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-11-30mainboard/compulab: add support for CompuLab Intense-PCHal Martin
Add coreboot support for CompuLab Intense-PC (Ivy Bridge) Modifications: - Memory SPDs have been fixed to detect both installed SODIMM modules - Full-height Mini-PCIe slot defaults to PCIe mode - mSATA can be chosen instead of mPCIe via Kconfig option ENABLE_MSATA Tested (Xubuntu 17.10/Linux 4.13 where applicable): - 2+2GB DDR3-1600 SODIMMs pass memtest - 4+4GB DDR3-1600 SODIMMs pass memtest - 4+8GB DDR3-1333 SODIMMs pass memtest - 8+8GB DDR3-1333 SODIMMs pass memtest - Booting via USB working (with no SATA HDD present) - Booting to main SATA HDD working - DisplayPort and HDMI output working for coreboot init (*requires* VGA BIOS) - DisplayPort and HDMI dual-head working in Linux - Mini-PCIe devices (half/full-height) detected in Linux - mSATA working (when chosen using ENABLE_MSATA) - Onboard Intel 82579 GbE working - Secondary Realtek 8111 GbE working - Rear eSATA ports working - Onboard analog audio output working - HDMI audio output working - USB 3.0 working - Suspend to RAM (S3) working, but not tested extensively - Mini PCIe WiFi - FACE module FM-4USB (4 USB 2.0 ports) Disabled/unsupported: - TPM (BTO option, not included in base config) - FACE modules: - FM-USB3 (USB 3.0/mSATA) NOT SUPPORTED/TESTED - FM-SER (serial) NOT SUPPORTED/TESTED - FM-XTDEU2/4 (LAN) NOT SUPPORTED/TESTED - FM-XTDE4U2/4 (Quad LAN) NOT SUPPORTED/TESTED - FM-XTDM2 (dual mPCIe) NOT SUPPORTED/TESTED - FM-VC (video capture) NOT SUPPORTED/TESTED - FM-POE (Quad LAN w/PoE) NOT SUPPORTED/TESTED Not tested: - RS-232 Product information: http://www.fit-pc.com/web/products/intense-pc/ Change-Id: I741b0b2f87eb9147c375b405a5b6989a10c7ad0a Signed-off-by: Hal Martin <hal.martin@gmail.com> Reviewed-on: https://review.coreboot.org/22210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-30intel: Replace msr(0x198) with msr(IA32_PERF_STATUS)Elyes HAOUAS
Change-Id: I22241427d1405de2e2eb2b3cfb029f3ce2c8dace Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/22585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-30mb/google/poppy/variants/soraka: Set PCH thermal trip point to 75 degreeCSubrata Banik
PMC logic shuts down the thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold in case Dynamic Thermal Shutdown in S0ix is enabled. BUG=b:69110373 BRANCH=none TEST=Ensure Thermal Device(B0: D20: F2) TSPM offset 0x1c[LTT (8:0)] value is 0xFA. Change-Id: I6246300a4376a0194950d4de277af040b10b6c1f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-30mb/google/nautilus: add synaptics touch screen supportChris Wang
Add synaptics touchscreen in the device tree so that the correct ACPI device is created. BUG=b:66462881 BRANCH=master TEST=compiled/verify the touchscreen works Change-Id: I6e89a5db0e9f8ae777eed661f3bf89d653a937e6 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-29google/kahlee: Add SPD functionMarc Jones
Add the mainboard_spd_read function in romstage and call the variants function. Grunt is the baseboard and has soldered down memory, so add it for the default weak SPD functions and build the SPDs in cbfs. Kahlee overrides the weak SPD function and falls back to the soc I2C SPD functions. BUG=b:67845441 TEST=Build and boot Kahlee. Change-Id: I789002bfadc1a2b24f9046708986d29c0e2daf33 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-29google/kahlee: Rename board_id to memory_skuMarc Jones
The GPIOs used in board_id are meant to indicate the memory configuration. Rename board_id to memory_skus. Report the board_id received from the EC. BUG=b:69649438 Change-Id: I84bacead3daf829c97f595c4c11a243953243c29 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22561 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-29mb/google/poppy/variants/nautilus: Disable camera devicesFurquan Shaikh
This change disables camera devices until camera support is properly added for nautilus. Change-Id: I7de37cbf9c32fa063f55a2e54986e33b66acfa3b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-29mb/google/poppy: Add variant support for camera aslFurquan Shaikh
This change adds infrastructure to allow variants to define their own camera.asl file. - Poppy and soraka use the one provided by baseboard. - Dummy file is added for nautilus since it does not have camera support enabled yet. TEST=Verified that DSDT table remains the same with and without this change. Change-Id: I0f0b489e74739aa4708283d58d8b7626b77a89a3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-28google/scarlet: support kd097d04 panelLin Huang
Support kd097d04 dual mipi panel on Scarlet. Change-Id: Ie8bc0cbb79840f1924a8cc111f2511292203731f Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28google/gru: correct backlight gpioLin Huang
it uses backlight enable pin as backlight gpio currently, correct it and define the right backlight gpio. Change-Id: I7c5abfd5bbbae015b899f3edc8892ea32bf82463 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: support dual mipi dsiLin Huang
Refactor the mipi driver, so we can support dual mipi panel. And pass the panel data from mainboard.c, that we can support different panel with different board. Change-Id: Id1286c0ccbe50c89514c8daee66439116d3f1ca4 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28mb/google/poppy/variants/nautilus: set I2C speed to 400KHzChris Wang
Add "speed_config" for each I2C port configuration to set speed to 400KHz. BRANCH=master BUG=none TEST=compiled/verified Change-Id: Icb48733b87cefc92577547b1eab661a8cbb12be6 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22589 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-28mb/google/poppy/variants/nautilus: Change IA/GT/SA slow slew rate settingsChris Wang
Change IA/GT/SA slow slew rate settings. System's audible noise will be reduced with them. - Slow slew rate for IA/GT/SA : fast/16 - Fast PKG C-state ramp for IA/GT/SA: disabled BRANCH=master BUG=none TEST=compiled/verified Change-Id: Ibf11aba7bafb3b02c510905d7d904507eee6394b Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: shkim <sh_.kim@samsung.com>
2017-11-28mb/google/soraka: configure WLAN_PE_RST gpio in early_gpio_tableDivya Chellap
On shutdown, Soraka enters Deep S5 and not S5 state. Setting pad reset config of a gpio to RSMRST will not preserve the gpio config across deepSx and the gpio should be configured again. The WLAN_PE_RST signal should be brought up early in the bootflow for giving the device enough time to initialized before PCIE init in FSP-S. Hence, the gpio WLAN_PE_RST (GPP_B8) pad configuration is done in early pad configuration in bootblock also. BUG=b:64386481 BRANCH=none TEST= WiFi functionality across S5, S3, DeepS3, S0ix and warm/cold reboot. Change-Id: I5c7a4a3871a3bff69c1136379c78a8368c6258a6 Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-11-28AMD platforms: Fix ASL comment that implies "\_SB" is southbridgeMartin Roth
Change-Id: I6ee86396a1c5aaee248a275b42da801cedace586 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-28mb/google/poppy/variants/nautilus: correct the SIO_EC_ENABLE_P2SK typoChris Wang
correct the typo from SIO_EC_ENABLE_P2SK to SIO_EC_ENABLE_PS2K. BRANCH=master BUG=b:66462881 TEST=compiled/boot to ChromeOS. Change-Id: Iaded458e202bc975c73cd295f7b363e2c9bfa861 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-28mb/google/poppy/variants/nautilus: remove ALS for nautilusChris Wang
nautilus doesn't support ALS. remove the definition from ec.h. BRANCH=master BUG=b:66462881 TEST=compiled/boot to ChromeOS. Change-Id: Ib357328799015f78b18cd260db221e524e98cef7 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-28mainboard/google/kahlee: Update Grunt for 16MB ROM chipMartin Roth
- Update Grunt to 16MB chip in Kconfig. - Move chromeos.fmd into variant directory & update Kconfig with the new location. - Add Grunt specific chromeos.fmd file. BUG=b:69691210 TEST=Build grunt; Build & Boot Kahlee Change-Id: I8d2f5e3255984d0d9a18df560f84f6db03b73a78 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-11-28mainboard/google/kahlee: Update chromeos.fmdMartin Roth
- Remove SI_ALL section. This is no longer needed as the PSP dirctory is placed into the RO coreboot section. - Add 1MB Legacy section. - Add Memory cache section. These sections are called "MRC", which is an Intel term, but AMD platforms will use the same regions for saving the same sort of data. BUG=b:65497959, b:67035984 TEST=Build & boot kahlee Change-Id: I5e41a0aa6bd4b29b8014c6559126a29cd7ed45d8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-27google/fizz: correct memory rcomp settingsKane Chen
Follow the schematic and Doc 573387 to correct the rcomp and rcomp target settings for fizz TEST= boot ok and the system can enter and resume from S3. Change-Id: Iffa90461509cfadaca20e335a6655e549e79e749 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/22479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-25google/fizz: Remove tpm i2c configs from KconfigShelley Chen
We are disabling tpm over i2c, so the configs are not needed anymore. BUG=b:65056998 BRANCH=None TEST=emerge fizz and make sure can still boot up. Change-Id: Id88f32fa952801749544534442fc15d85fc1a892 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-25google/fizz: Disable unused i2c linesShelley Chen
As cr50 has now switched to using SPI, no need to enable the i2c1 anymore. Additionally, disabled unused I2C devices -- I2C0, I2C2 and I2C3. BUG=b:69374421 BRANCH=None TEST=test on fizz celeron. Make sure /dev/tpm0 created on (many) reboots. cat /proc/interrupts. Make sure # interrupts for 16 after booting is reasonable (not > 10k) and idma64.0, i2c_designware.0 are not listed with that interrupt line anymore. Should look something like this: 16: 1174 0 IO-APIC 16-fasteoi i801_smbus, snd_soc_skl, AudioDSP Change-Id: Iac3e31264a937a1d7ed6bd41632e7e065317781b Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-23google mainboards: select SYSTEM_TYPE_LAPTOP where appropriateMatt DeVillier
Some Google boards are missing this selection, leading them to being incorrectly identified as type 'Desktop' in SMBIOS type 3 table. Correct this by adding 'select SYSTEM_TYPE_LAPTOP' to the boards' Kconfigs. TEST: boot Linux and check correct chassis type listed via dmidecode Change-Id: Ib1145e314812a3f300cfd1a435a687aa0862158a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-23src/mainboard: Fix various typosJonathan Neuschäfer
These typos were found through manual review and grep. Change-Id: Ia5a9acae4fbe2627017743106d9326a14c99a225 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-23sb/intel/i82801ix: fetch initial timestamp in bootblockArthur Heymans
TESTED on Thinkpad x200 Change-Id: I3cd286709f8734793dc6ae303215433eff29d25b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-23google/fizz: Define smbios_mainboard_sku to return OEM IDsShelley Chen
Currently, mosys just returns "fizz" as model/chassis values. Returning proper OEM IDs so that mosys can return the proper variant. BUG=b:67732053 BRANCH=None TEST=mosys platform model; mosys platform chassis; Make sure returns the right variant string and not fizz. Change-Id: I42e293e833b0f7c9870dc275561ad13256836e60 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-22chromeec: Change the API for hostevent/wake masks to handle 64-bitFurquan Shaikh
ChromeEC is getting ready to bump up the hostevents and wake masks to 64-bits. The current commands to program hostevents/wake masks will still operate on 32-bits only. A new EC host command will be added to handle 64-bit hostevents/wake masks. In order to prevent individual callers in coreboot from worrying about 32-bit/64-bit, the same API provided by google/chromeec will be updated to accept 64-bit parameters and return 64-bit values. Internally, host command handlers will take care of masking these parameters/return values to appropriate 32-bit/64-bit values. BUG=b:69329196 Change-Id: If59f3f2b1a2aa5ce95883df3e72efc4a32de1190 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-22google/gru: Add support for rainierEge Mihmanli
Rainier is a scarlet-derived board but uses eDP as opposed to MIPI. Using GRU_BASEBOARD_SCARLET is enough, except for display related logic. In those cases, use board specific logic instead of baseboard. Change-Id: I596f7ca6bc26312ecaeb261c96cebd46974c2cdf Signed-off-by: Ege Mihmanli <egemih@google.com> Reviewed-on: https://review.coreboot.org/22542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-22Create SOC description file soc.aslRichard Spiegel
Request from commit 519680948b (move carrizo_fch.asl code to soc), merge several includes into a single file in soc directory. Rename soc_fch.asl to sb_fch.asl. Rename fch.asl to sb_pci0_fch.asl. Then copy the required section from dsdt.asl into a new soc.asl. Affected boards: amd/gardenia and google/kahlee. BUG=b:69368752 Change-Id: I83d850cf9457f7c2c787336823d993ae2e9d28ce Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22541 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-21mb/google: Update/add ChromeOS device marketing namesMatt DeVillier
Commit c09c2a4 [mb/google: Add Chromebook marketing names] added marketing names for many ChromeOS devices; add some that were left out, correct some errors, and try to format model names/numbers consistently (or as consistently as the manufacturers allow). Change-Id: Ia13858e2e6ba7d7e025f25fad33e6338250498e5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-20mainboard/google/fizz: Enable separate MRC cache for recovery modeShelley Chen
Enable separate MRC cache for recovery mode. This requires change in flash layout to accomodate another region for RECOVERY_MRC_CACHE. BUG=b:69473883 TEST=Verified following scenarios: 1. Boot into recovery does not destroy normal mode MRC cache. 2. Once recovery MRC cache is populated, all future boots in recovery mode re-use data from the cache. 3. Forcing recovery mode to retrain memory causes normal mode to retrain memory as well. Change-Id: Icdfac3698507d89d98a51cfc3d756a56d2a2d648 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-20google/gru: Add config for scarlet-derived boardsEge Mihmanli
There is merit in having new boards use the pinouts and controls in scarlet. This adds a config so new scarlet-derived boards can easily use scarlet structure without going through every file and adding new logic. TEST=Run "emerge-scarlet coreboot" Signed-off-by: egemih@chromium.org Change-Id: I5808f93f4563033ce93050e1eedb6eac2b52c3b3 Reviewed-on: https://review.coreboot.org/22517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-20amd/stoneyridge: Fix SPD files and functions camel caseMarc Jones
Remove ugly camel case in the soc/amd/common and Stoney Ridge SPD files and functions. Update the related mainboards. Also, remove a unreferenced function prototype, smbus_readSpd(). Change-Id: I51045b6621f0708d61a570acbdcb4e6522baa1ea Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-19mb/google/kahlee: Move ec.h into variant include directoriesMartin Roth
The mainboard directory is included through the PI makefile - most mainboard directories aren't in the include path at all. Move the ec.h file into the baseboard/variant directory that is already in the include path. BUG=b:69220826 TEST=Build Change-Id: I89d361b700c66ba576de724927574fdab9461fc6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-19mainboard/google/kahlee: Remove direct AGESA header includesMartin Roth
All AGESA headers should be included only through agesawrapper.h I missed this file in the Kahlee cleanup. BUG=b:66818758 TEST=Build gardenia; Build & boot kahlee Change-Id: Id9b303cb3cee8088fb5cca5257566c033d28c692 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-19mainboard/google/kahlee: Update memory.cMartin Roth
This fixes some issues with the initial implementation that was copied from reef. - The board ID value shouldn't be size_t - it's not a size. - Kahlee doesn't even need the memory.c file - it uses an SoDIMM. BUG=b:68293392 TEST=build stoney platforms, boot kahleebo Change-Id: Ife5660d36912e887edfd0365a9f16c5a172c9c86 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22515 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-17mb/google: Add Chromebook marketing namesJonathan Neuschäfer
It's sometimes hard to find the code name of a Chromebook. Add the marketing names to Kconfig, since they are easily available. Information (mostly) taken from: https://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices Unknown boards (unreleased, etc.): * Fizz * Foster * Nasher, Coral * Purin * Rotor * Rowan * Scarlet, Nefario * Soraka * Urara * Veyron_Rialto Baseboards: * Glados * Gru * Jecht * Kahlee * Nyan * Oak * Poppy * Rambi * Zoombini White label boards: * Enguarde * Heli * Relm, Wizpig TODO: How does this interact with the board_status code? Change-Id: I20a36e23bd3eea8c526a0b3b53cd676cebf9cd86 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-17amd/gardenia: Add defines in OemCustomize.cMarshall Dawson
Add a #define for MB_DIMM_SLOTS and verify it doesn't exceed the max supported for the device. AGESA's DRAM procedures follow the BKDG and may vary depending on the number of slots on the motherboard. DIMM numbering and ordering is also affected by this value. Replace hardcoded integers with defined values for DIMM slots and number of channels. Change-Id: I81aa0165660e7627f1d977ac40479700cff8b80b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21854 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-17mb/lenovo/t400/blc.c: Add LTN154P2-L05 to whitelistKevin Keijzer
TESTED on Lenovo T500 Change-Id: I5546641cb34264e29ccb3398dd68f6144dafe524 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/22367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-17mb/lenovo/t400: Add LTN154X3-L02 to list of known displaysKevin Keijzer
TESTED on Lenovo T500 Change-Id: I9c9fef82ca4af99c7d4813e0ab0e315fde93b972 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/22475 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-11-15variants/kahlee: Add thermal ASLMarc Jones
Connect the EC thermal to Kahlee and Grunt thermal ASL. Intialize GNVS thermal values in the mainboard finalize. BUG=b:67999819 Change-Id: I89159a5fd3c639e511139b8c5948b6a4ee19aaa3 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-11-15google/kahlee: Get power plug notification from the ECMarc Jones
Set the EC SCI reporting mask to include the power plug reporting. BUG=b:65637324 TEST=Check power_supply_info on AC/DC. Change-Id: I58814fc495081ffe8e47162da0fa4fbeba49d67b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-15mb/{amd/gardenia,google/kahlee}: move carrizo_fch.asl code to socRichard Spiegel
Code within carrizo_fch should be SOC specific instead of board specific. BUG=b:64034810 Change-Id: I5de2020411794bfcd3730789f62af9c9834a018b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22455 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-14mb/google/eve: Add DSP calibration clock name/rate for RT5514Cheng-Yi Chiang
Add a property for DSP calibration clock name and rate such that RT5514 codec driver can control ssp1_mclk for DSP clock calibration. BUG=b:67763576 TEST=boot on eve check RT5514 codec driver can get this device property. Change-Id: Icf9695ef67efb2bb073e39b2ece02d57f0460a0c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Original-Change-Id: Ie204dda81a099f23beb20be71380a8494a9bee31 Original-Reviewed-on: https://chromium-review.googlesource.com/756261 Original-Reviewed-by: Dylan Reid <dgreid@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/22451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/google/eve: Set DSP SPI clock to 12MHzDuncan Laurie
To enable faster download of hotword data set the SPI clock to the Realtek 5514 DSP chip to 12MHz instead of the default 1MHz. BUG=b:67763576, b:66161281 TEST=cras_test_client --listen /tmp/rec.raw, trigger hotword, and check the samples using hexdump or cras_test_client --playback_f /tmp/rec.raw Change-Id: I92710eae25613a8202c63888b86a269803c40fe6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Original-Change-Id: I7e50d755a90d739b6dec155228351c3974b2f3b9 Original-Reviewed-on: https://chromium-review.googlesource.com/686675 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Chinyue Chen <chinyue@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Tested-by: Chinyue Chen <chinyue@chromium.org> Original-Commit-Queue: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/22450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/google/eve: Enable VMXDuncan Laurie
This feature was enabled at the kernel level, but that is triggering an issue where FSP expects it to be disabled so it forces a cold reboot on every warm reboot. Since we want this enabled anyway just set it this way in the BIOS so it matches what the kernel expects. BUG=b:68666100 TEST=pass firmware_FWtries on Eve with R63 OS image Change-Id: I294e34d25406365d591da06ce4c931b710cfbbaa Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: I964d3d30392d130e808f37a661f2c89ec926cf58 Original-Signed-off-by: Duncan Laurie <dlaurie@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/749733 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/google/eve: Tune I2C4 hold timesDuncan Laurie
Tune PCH I2C4 hold times to ensure the frequency is always <400KHz. BUG=b:67029862 TEST=boot on eve and measure I2C4 at Tp262 to be 385KHz Change-Id: Ie93c5c40bc74069b285f6c3ee311f1bd7cefcaf1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: Iceabc806a17b9e6a144a4f6288c6cca790d03950 Original-Signed-off-by: Duncan Laurie <dlaurie@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/739841 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/google/eve: Enable AER and LTRFurquan Shaikh
AER and LTR must be enabled individually on ports that need it, in this case it should be enabled for WiFi and NVMe. BUG=b:65457528 TEST=Wifi team verified that the performance is better with these changes. Change-Id: I0d688fe07a1f3117c1ca617c2ce78e0d024a3510 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: Ib059517fa782ccc18ba5ef1f76058a1898b7bf7a Original-Signed-off-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/671211 Original-Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Commit-Queue: Duncan Laurie <dlaurie@google.com> Original-Tested-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/22447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/google/eve: Use rt5663 driver and set propertiesDuncan Laurie
Use the rt5663 driver and provide values for the offsets which are needed for providing manual values to compensate the DC offset for L and R channels between headphone and headset. BUG=b:62712227 TEST=build and boot on eve and ensure rt5663 is functional. Change-Id: I88113616e4b7c79cff840168b7c54ae754dfa75f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: Ica4090636c1ff29f0298114e62c9cc6fe167a425 Original-Signed-off-by: Duncan Laurie <dlaurie@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/611606 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Hsinyu Chao <hychao@chromium.org> Reviewed-on: https://review.coreboot.org/22446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/google/eve: Remove ACPI control of touchscreen powerDuncan Laurie
Change the touchscreen power control back to coreboot instead of under the ACPI _ON/_OFF methods, and switch the TOUCHSCREEN_STOP_L pin back to an output. This reverts previous changes to touchscreen GPIOs that were made to get back to a known good/working state. Having ACPI control these pins was resulting in a small percentage of touchscreen not being discovered at boot. This platform is not intending to use S0ix so the ACPI control is not needed. BUG=b:63718744 TEST=manual testing on Eve devices. Change-Id: I3fd64a435a053da1558ef736fe7baceee3c8f3a0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: Ia1e2ae7ca2a8b668c60fbda2aa50373e580646b2 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/572692 Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Commit-Queue: Duncan Laurie <dlaurie@google.com> Original-Tested-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/22445 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/amd/gardenia: Remove direct AGESA header includesMartin Roth
All AGESA headers should be included only through agesawrapper.h BUG=b:66818758 TEST=Build gardenia Change-Id: I3c9ae7a435fadabf577f1f65ad4a6aa6234e9a29 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-14mb/google/kahlee: Remove direct AGESA header includesMartin Roth
All Stoney AGESA headers should be included only through agesawrapper.h BUG=b:66818758 TEST=Build and boot tested Change-Id: I642f5caf8a37ae4042c32fec3a92e0995193cb7a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-13mb/google/kahlee: Add getter function for GPIO arrayMartin Roth
Instead of getting the address of the GPIO function with an extern, add a getter function and make the GPIO arrays static. TEST=Build Grunt; Build & boot Kahlee BUG=b:69164070 Change-Id: I3defcb66696459b915d7d4f43234d5c08ab7d417 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-13mb/google/kahlee: Remove mainboard.hMartin Roth
mainboard.h only had a single function definition. Move it into baseboard/variants.h and get rid of the file. TEST=Build grunt/kahlee BUG=b:69164070 Change-Id: I6b7d50d5c949733d77c42b4daf56ed1f97ed6954 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-13mainboard/google/kahlee: Add Grunt variant frameworkMartin Roth
Update common files and add files for grunt to the variant directory. BUG=b:68293392 TEST=Build only Change-Id: I7b80e470058872d6613e66e64c8dd1494942e9b9 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-13mainboard/google/kahlee: Add baseboard frameworkMartin Roth
BUG=b:68293392 TEST=Build only Change-Id: Ie4d039b4da10a992fc9dd2b0221fd4a1644aae6a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-13amd/gardenia: Add globalnvs.aslMarc Jones
Stoney Ridge ASL uses global NVS for sharing data between ACPI and SMM. Change-Id: I8f497870844da1f56ff5c3b126d5613be36a9bfb Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-13google/chell: add missing SPD hex filesMatt DeVillier
Several SPD hex files for chell were missing from upstream coreboot (as compared to the Chromium tree/branch), which resulted in the incorrect type and amount of RAM being reported on chell boards with > 4GB RAM. Add these missing files and their Makefile entries. TEST: boot google/chell m7/16GB config and observe correct RAM type and amount reported via dmidecode and cbmem console log. Change-Id: I37d708c96e754b438e40fc413420aa64bf234c29 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22402 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-10google/kahlee: Use devicetree register values for UMAMarshall Dawson
Set the UMA memory size to 128 MiB. This value was empirically tested by AMD as the lowest value one could use. BUG=b:64927639 TEST=default, and 64, 128, 256, 384MB non-legacy configurations. Change-Id: I2bc808d8b402c3eb16a1a5962f3fa9d6b224cf52 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/21335 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-10google/kahlee: Add defines in OemCustomize.cMarshall Dawson
Add a #define for MB_DIMM_SLOTS and verify it doesn't exceed the max supported for the device. AGESA's DRAM procedures follow the BKDG and may vary depending on the number of slots on the motherboard. DIMM numbering and ordering is also affected by this value. Replace hardcoded integers with defined values for DIMM slots and number of channels. Change-Id: I4f7336da80b4e3d7f351502a63de0652e9ff5395 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21853 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-10google/kahlee: Move DRAM clear override to devicetreeMarshall Dawson
Kahlee needs to keep its DRAM contents after a reset. Move this override out of the OemCustomize.c file to a devicetree register setting. Change-Id: I3196cb8b94bec64e8ce59e4285cf8d97f442bd3d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/21858 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-10mainboard/google/coral: power off EN_PP3300_DX_LTE_SOC when entering S5Ben Chan
On Astronaunt, after the system enters the S5 power state, there is a 10-second timeout before the system transitions the power state from S5 to G3. The EN_PP3300_DX_LTE_SOC signal, which is controlled by GPIO_78 on the APL platform, remains on during that period. If the system is powered back on before going to G3, the built-in modem won't go through a power cycle as EN_PP3300_DX_LTE_SOC is never de-asserted. Keeping the modem, and indirectly the SIM, powered during a quick system power cycle may sometimes be undesirable. For instance, we would like a SIM with PIN lock enabled to require unlocking each time the system is powered on. After the SIM receives a PIN, it may remain unlocked until its next power cycle. Also, it is often desirable to power cycle the modem when the system goes through a power cycle. For instance, a user may power cycle the system to recover a wedged modem. BUG=b:68365029 TEST=Tested the following on an Astronaunt device: 1. Verify that the modem is powered on after the system boots from cold. 2. Suspend the system to S0ix. Verify that the modem remains powered on when the system is in S0ix. After the system goes back to S0, verify that the SIM with PIN lock enabled doesn't request unlocking, and the modem can quickly reconnect to a network. 3. Configure the system to suspend to S3 instead of S0ix, and then repeat (2). 4. Perform a quick system power cycle, verify that the modem is powered cycle and the SIM with PIN lock enabled requests unlocking. Change-Id: Ie60776d5d9ebc6a69aa9e360bd882f455265dfa2 Signed-off-by: Ben Chan <benchan@chromium.org> Reviewed-on: https://review.coreboot.org/22415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-09mainboard/google/zoombini: add dptf.asl and gpio.hNick Vaccaro
Add dptf.asl (copied from reef) to baseboard variant includes, instruct zoombini variant to use the baseboard's dptf.asl, instruct zoombini variant to use the baseboard's gpio.h. BUG=b:64395641 BRANCH=None TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: I9aa37f5afc35dab372917a4c84ff3121ec569546 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/22381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-09mainboard/google/zoombini: fix EC_SCI_GPI gpio defineNick Vaccaro
Change EC_SCI_GPI to GPE0_ESPI. BUG=b:69011806 BRANCH=master TEST=none Change-Id: I5d07bc0ef295d776635ff3a585c8de9028bd3f6a Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/22380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-09mb/google/{poppy,nautilus,soraka}: Disable deep S3Furquan Shaikh
Poppy and variants won't be using deep S3. This change disables deep S3 option in devicetree. BUG=b:69053636 Change-Id: I5fb4a6a0e4216a3648b5ed888f6dc6618f1a9fc4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22378 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 05:31:57 +0000