summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2013-12-21pit: update PMIC write sequence in romstageDavid Hendricks
This update the PMIC write sequence to be correct for newer board revisions. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I2210b0d1945fb19c96a674c8fad1b0ff5a4a381e Reviewed-on: https://gerrit.chromium.org/gerrit/64304 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21snow: TPS69050 -> TPS65090David Hendricks
This corrects a minor typo used for a part number. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I8583cbfc3b4a6c3ad06419f5aab3ba7a8f685575 Reviewed-on: https://gerrit.chromium.org/gerrit/64301 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4424 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21kirby: pit: Fix up wakeup_need_resetGabe Black
In a previous commit the contents of wakeup_need_reset were removed because the GPIO it referred to wasn't connected to anything on pit. I didn't realize at that time that that could have been because we hadn't tried getting suspend/resume working on pit and hadn't updated that file. On snow, the GPIO is the recovery mode pin. This change updates pit to have the right GPIO, kirby to read that GPIO, and makes the comments for both pit and kirby more explicit and spells out the fact that this is the recovery mode GPIO. Having a check here at all may still be a holdover from snow that isn't applicable to pit or kirby, but since there is a parallel as far as the recovery mode GPIO we might as well make them match while waiting for more information. Change-Id: Ic1f3f605a0fddf89e8f5668c7a8df30bdfb91d94 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64164 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4421 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21pit: Get rid of the mostly unnecessary exynos5420.hGabe Black
Like on kirby, this header had a single constant in it that was actually used. This change moves that constant inline and gets rid of the header file. Change-Id: Ibe380396f72fddb121fb6ceb3cee24f1b9a85738 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64163 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4420 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21kirby: Clean some cruft from mainboard.cGabe Black
1. Kirby doesn't have a backlight enable GPIO on the AP since that's handled entirely by the DP-to-LVDS bridge. 2. There is no tps65090 on the other side of the EC who's settings need to be adjusted. If we need to turn on the LCD or backlight power manually, it will have to be done in a different way. 3. The PMIC doesn't provide a 32KHz output for the audio codec. Change-Id: Iadc5f3aec4818805edf3f2517da9e6fee87085dc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63883 Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4413 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21kirby: Neutralize wakeup.c and delete the mostly unused exynos5420.hGabe Black
The function in wakeup.c isn't applicable on kirby. The only constant in exynos5420.h that was used was the speed of the 4th i2c bus. Instead of having a whole header file for that one constant used in one place, the constant is just moved inline along with the comment it had in the header. Change-Id: I5ad50c5eeaecbbf7865d76afb31a12d36c3371ee Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63882 Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4412 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Add a kirby board which is mostly a copy of pitGabe Black
Change-Id: Ic78c65486816015f7574a13affc6e54acbbea73e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63875 Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4411 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Exynos 5420: Enable dynamic CBMEMStefan Reinauer
... In order to do this, the graphics memory has to move into the resource allocator and out of CBMEM. Change-Id: I565c3d6dea747822fbabf6f3845232d4adfbf333 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63657 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4391 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Exynos 5250: Enable dynamic CBMEMStefan Reinauer
... In order to do this, the graphics memory has to move into the resource allocator and out of CBMEM. Change-Id: I7396da4a7068404b0d2e4d308becab4dd6ea59bb Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/59326 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4390 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21google/pit: disable SYSMMU for graphicsRonald G. Minnich
It's not needed and it's a potential problem source. Change-Id: Ic4cafe74e7fc3a9031d852895ad7fd5e5cd64d11 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/62279 Commit-Queue: David Hendricks <dhendrix@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4410 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Refactor code containing aux callsFurquan Shaikh
Moved a lot of code from i915io.c to intel_dp.c with specific function calls Change-Id: Ib2ed52b4f73ee0076e2dd68a26541e5bbe1366bc Reviewed-on: https://gerrit.chromium.org/gerrit/63950 Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4429 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Slippy/Falco: Fill in right values for PHSYNC and PVSYNC in transcoder flagsFurquan Shaikh
Depending upon the values decoded from edid, the function decides the appropriate bits to be set in flags parameter (Important for fastboot to work correctly in kernel) Change-Id: I3b0f914dc2b0fd887eb6a1f706f87b87c86ff856 Reviewed-on: https://gerrit.chromium.org/gerrit/64265 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4423 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Add cpu transcoder attribute to intel dpFurquan Shaikh
Also, used this attribute in the calculation of htotal and other registers Added intel_dp_* functions for m,n registers and dimension register calculations Change-Id: I99dd7156700d59b0b4c85e34c9aa1c6408c7f31a Reviewed-on: https://gerrit.chromium.org/gerrit/64001 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4422 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Calculate transcoder flags based on pipe configFurquan Shaikh
Works fine with all three panels with the change of 6 bits per color. Change-Id: Ia47d152e62d1879150d8cf9a6657b62007ef5c0e Reviewed-on: https://gerrit.chromium.org/gerrit/63762 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4402 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21peppy: Set optimal DTLE register valuesShawn Nematbakhsh
Empirical testing shows that 0x5 is the optimal setting for DTLE DATA / EDGE on Peppy. Change-Id: I273a3a68be97b3eb7c2ee2071e5de1ef7bf7f2d9 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65717 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4476 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21wtm2: disable SDcard USB portDuncan Laurie
This is causing hangs in depthcharge (again?) so for now turn that port off so the resulting coreboot images are at least useful. Change-Id: I32c7774a95b0020b97105e0fa42c21ccb617c718 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65615 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4467 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21slippy/falco/peppy: Fix EC wake events in S5Duncan Laurie
The SMI handler code was setting S3 wake events when going into S5 and enabling a key press to wake the system. Change-Id: I6413ef1341e0149187df9f4f7e0c314d4c9e9c6e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65323 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4459 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21falco: Force enable ASPM on PCIe Root Port 1Duncan Laurie
Boot on falco and look in /sys/firmware/log for the string "PCIe Root Port 1 ASPM is enabled" Change-Id: Ie2111e4bb70411aa697dc63c0c11f13fbe66c8d8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65315 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4454 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21falco: Disable unused clocksDuncan Laurie
CLKOUT for PCIE ports 1-5 and CLKOUT_XDP are not used and can be disabled. I couldn't test this directly without a scope so instead I used a modified commit that also disabled PCIe Port 0 and saw that that correctly disabled the WLAN port. Change-Id: I0f996e90f0ae42780de3a0c8dc5db00ec600748b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65251 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4451 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21falco: Enable EC controlled throttlingDuncan Laurie
When the EC requests the host to throttle (for charging or thermal related reasons) the package power consumption will be limited. Right now this is set at 12W but that is somewhat arbitrary and may need tuning. 1) define the THRT method in \_TZ scope for EC to call 2) enable SCI events for throttle start and stop 3) define the power limit at 12W and set it in NVS 1) Enable CONFIG_ACPI_DEBUG=y in the kernel 2) Enable the Debug object event in acpi module acpi.debug_layer=0x7f acpi.debug_level=0x2f 3) Using EC console generate host event for throttle start > hostevent set 0x20000 4) Check dmesg for throttle start events ACPI: Execute Method [\_SB_.PCI0.LPCB.EC0_._Q12] (Node ffff8801002c5988) [ACPI Debug] String [0x12] "EC: THROTTLE START" [ACPI Debug] String [0x10] "Enable PL1 Limit" 5) Using EC console generate host event for throttle stop > hostevent set 0x40000 6) Check dmesg for throttle stop events ACPI: Execute Method [\_SB_.PCI0.LPCB.EC0_._Q13] (Node ffff8801002c59b0) [ACPI Debug] String [0x11] "EC: THROTTLE STOP" [ACPI Debug] String [0x11] "Disable PL1 Limit" Change-Id: I39b53a5e8abc2892846bcd214a333fe204c6da9b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63989 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4416 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21falco: Drive GPIO59/LTE_DISABLE_L low on S3/S5Duncan Laurie
Try to prevent WWAN from causing spurious wakes. Change-Id: Ifcc44063de0eb1634cab9dd244737071568e3455 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63987 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4414 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21pit: Add missing elements to the edid data structureGabe Black
When the edid data structure changed a while ago, it caused hangs on snow which were fixed by adding those missing members. Unfortunately we didn't realize that pit needed the same fix. Change-Id: I81780b8135b99b2e24af723e703b9befff7b5ef0 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63646 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4389 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21pit: Bump the EC SPI bus speed up to 5 MHzGabe Black
That speed is used with U-Boot instead of the more conservative 500 KHz. Change-Id: Ie9d79db3b52b88c1f3bfec1745634ae6bdc9f4ee Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63193 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4386 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21falco: add rtd2132 settings to device treeAaron Durbin
Now that the rtd2132 device has the full settings the panel timings need to be implemented. Sadly, the Tx timings in the rtd2132 aren't 1:1 with the panel's Tx timings. Below is the table equivalent: RTD2132 | Falco Panel --------+------------ T1 | T2 --------+------------ T2 | T8+T10+T12 --------+------------ T3 | T14 --------+------------ T4 | T15 --------+------------ T5 | T9+T11+T13 --------+------------ T6 | T3 --------+------------ T7 | T4 --------+------------ Change-Id: I10a3ad475d6b9485a707eb49e31afd197fc8d24d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65858 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4472 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Pit: set PWM to external on ParadeRonald G. Minnich
The PWM is controlled externally from the APU. Change-Id: Ia5130d7616991a78dfde44043a60a32cee4f145c Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/61513 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4363 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Pit: move parade writes to mainboard.cRonald G. Minnich
What gets written into the parade is highly mainboard-dependent. So the parade_writes array needs to be there. Change-Id: Ia382d9bf1929e67b7c14d7a09f5461b71866a16b Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/61486 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4362 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21peppy: Drive WLAN_DISABLE_L / BT_ON low in S3 and S5.Shawn Nematbakhsh
When the board is in S3 and S5 the WLAN_DISABLE_L signal can leak power into the WLAN power well since the GPIO controlling WLAN_DISABLE_L is in the suspend well. Therefore, drive WLAN_DISABLE_L low to avoid the power leak. This is a clone of a Falco change: I1a0df80dd47fdbd535aca7a9d49253794c480606. Change-Id: I625dfbb228d1f293b880a52dfe552842d55a17d1 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63220 Reviewed-by: Dave Parker <dparker@chromium.org> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4383 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21FUI: Fill in link_m and link_n valuesFurquan Shaikh
... based on the EDID detailed timing values for pixel_clock and link_clock. Two undocumented registers 0x6f040 and 0x6f044 correspond to link_m and link_n respectively. Other two undocumented registers 0x6f030 and 0x6f034 correspond to data_m and data_n respectively. Calculations are based on the intel_link_compute_m_n from linux kernel. Currently, the value for 0x6f030 does not come up right with our calculations. Hence, set to hard-coded value. Change-Id: I40ff411729d0a61759164c3c1098504973f9cf5e Reviewed-on: https://gerrit.chromium.org/gerrit/62915 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4381 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Slippy: remove unneeded code in i915io.cRonald G. Minnich
This code is left over from what the VBIOS did; It is redundant. Change-Id: I321c867c81ec8b4d5e10f8b51b872cecb3082d97 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/62290 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4380 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21slippy/falco/peppy: Route USB to XHCI on resumeDuncan Laurie
Turn on the pei_data flag that will instruct the reference code binary to route all USB ports to the XHCI controller on resume and disable the EHCI controller(s). Change-Id: I2f2ed853a6d17f90ea524bc516f3e78079222739 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63798 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4404 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21haswell boards: fix SATA interrupt in ACPIDuncan Laurie
SATA is routed to PIRQG which should be interrupt 22 and not interrupt 21. The kernel uses MSI with this device so this is only seen when booting with pci=nomsi Change-Id: Ic90ca2c561fc4c53ec1d395c05872222c65ff98a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63796 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4398 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21slippy/falco/peppy: update ACPI C-state settingsDuncan Laurie
Since these boards do not support C10 we should not bother advertising that state in the ACPI _CST. Instead use this map: ACPI(C1) = MWAIT(C1E) ACPI(C2) = MWAIT(C3) ACPI(C3) = MWAIT(C7S) Change-Id: I37eb02bf9555c74e957316a1ba9778eb2b6ee128 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/62898 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4377 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint me: add support for mbp clear wait in finalize stepDuncan Laurie
The management engine is slow, requiring at least 500ms between when the Dram Init Done message is sent (right after memory training) to when the MBP will report that it is successfully cleared and that the ME can finally be sent the EOP message. Currently this is adding 100-150ms to the boot time. If we defer waiting for the MBP Clear indicator until the finalize step we can gain back that lost time. boot on falco with SMI debugging enabled to ensure that the ME is locked down in the finalize step: Finalizing Coreboot SMI# #0 SMI_STS: PM1 APM ME: MBP cleared ME: mkhi_end_of_post ME: END OF POST message successful (0) Change-Id: Icab4c8c8e00eea67bed5e8154d91a1eb48a492d1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/62633 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4375 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Revert "lynxpoint: Move ME lock down to ramstage"Duncan Laurie
This reverts commit ff81f50f0e4c068b64c4a5c7f5244196ecd24965. Deferring this step until the finalize stage will allow us to defer waiting for the MBP clear indicator and speeding up the boot. Change-Id: Ib8edffd06689e72875830cd68b5aedb7ac3b0559 Reviewed-on: https://gerrit.chromium.org/gerrit/62631 Tested-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4373 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21SLIPPY: final changes for FUIRonald G. Minnich
The intel_ddi.c change I thought should be in but I don't see it. It just adds two functions back that we need. There are two new files for slippy annotated with comments about how it needs to evolve. That said, this code has been tested on 3 different panels. Both dev and non-dev usages work. physbase initialization to static value removed. Moved spin calls to intel_dp_* Change-Id: I0480af45c21c7dedcaff7e8be729f0eb554ec78a Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/61136 Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4370 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-12-21peppy: Duplicate SPD data for 2GB configurations.Shawn Nematbakhsh
Peppy SPD table has 4GB configurations followed by 2GB configurations. Current implementation does remapping to point 2GB configuration to the same SPD index as the 4GB. This is different than Falco, which simply duplicates the SPD data for all configurations. To simplify probing in mosys, copy the Falco implementation of duplicating SPD data. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: Idb185a437f3cf4f40d2dae1ae59c30235df8f489 Reviewed-on: https://gerrit.chromium.org/gerrit/61847 Reviewed-by: Dave Parker <dparker@chromium.org> Reviewed-by: Jay Kim <yongjaek@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4369 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-12-21haswell boards: Use PECI temp sensor id 0Duncan Laurie
The EC temperature sensors were renumbered and now PECI is at index 0. 1) boot on falco 2) check /sys/class/thermal/thermal_zone0/temp 3) check 'temps' on ec console Change-Id: Idde1457c42c80850b5b8ac22781060ed9b224d13 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61896 Reviewed-on: http://review.coreboot.org/4367 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-12-21falco: Enable RTD2132 spread spectrum at 1.0%Duncan Laurie
This may need further tuning but will start at 1.0%. boot on falco and check /sys/firmware/log localhost ~ # grep RTD2132 /sys/firmware/log RTD2132: Enable 1.0% Spread Spectrum I2C: 01:35 (Realtek RTD2132 LVDS Bridge) Change-Id: I96e1c14dbc6a7bfaf1c8deb1806c48bf2fd3e32a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61895 Reviewed-on: http://review.coreboot.org/4366 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-12-21bolt: make the gpio interrupts edge sensitiveAaron Durbin
The drivers in the kernel expect the devices using gpios to generate interrupts to be edge sensitive. Make it so. Change-Id: I920ef621682d33ba081f737e97f0239f903db2f7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61678 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4361 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-12-20armv7: Remove SYS_TEXT_BASE config.Hung-Te Lin
SYS_TEXT_BASE is not used by any one. To prevent confusion when changing memory layout, remove it from current configurations. Change-Id: I15012b864bbb9c12003843b9b24ea64c91f4578b Reviewed-on: https://gerrit.chromium.org/gerrit/61853 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Hung-Te Lin <hungte@chromium.org> Tested-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/4371 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-19ec/lenovo/h8: Enable 3G modemVladimir Serbinenko
Just like bluetooth and wlan it need to be enabled in EC. Set the appropriate bit in EC if CMOS config says so. Change-Id: Ia48ca3201f013d3b4c4153f32ff536e06b6a2f6d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4516 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-16X60/T60: Implement "next display output" button.Vladimir Serbinenko
Most of the code needed for this is already in the tree with X201 patch series but code didn't know where to send the next screen notification and so was disabled. Define right video device. Tested by: Sam Noble Change-Id: I4ff0d220afdca342617ce43c6e5d0164ad8eba27 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4494 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-12-15lenovo/x201: Add support for Lenovo X201 (Calpella-based laptop)Vladimir Serbinenko
Was extensively tested on my X201. More info on the wiki Change-Id: I503d77749780422e446b48224ca98a1f22a2c180 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4514 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-15intel/cougar_canyon2/Kconfig: Remove HAVE_ACPI_RESUME as S3 is unsupportedPaul Menzel
According to the commit message for the board Cougar Canyon 2 (48a749a8) resuming from S3 is currently unsupported. The FSP does not support S3 at this time. S3 may be added when it is available in the FSP. Mirror that in the configuration by not selecting the Kconfig option `HAVE_ACPI_RESUME`. Change-Id: I894f103ffa7d8db6342f99fff0867b02bc750752 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/4519 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-12-12bolt: Initial mainboard commitDuncan Laurie
BUG=chrome-os-partner:20448 BRANCH=none TEST=emerge-bolt chromeos-coreboot-bolt Change-Id: I634a755ac7659e7a977b51bcc061f69eb8263810 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59843 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4330 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12HDA: Enable Mini-HDA and fix up PCH-HDA initDuncan Laurie
The SystemAgent contains a mini-hd audio controller at PCI 0:3.0 which uses the same verb table init sequence as the southbridge. In order to avoid two copies of the verb table loading code I separated out the HDA verb table functions into a file that can be re-used and then added a minihd driver to the haswell northbridge. The minihd verb table is the same across devices so it can live within the minihd driver rather than needing to be specified in each separate mainboard. I also fixed up the driver for lynxpoint HDA by following the reference code. Without HDMI cable plugged in driver does not find any codec, and it does not seem to re-probe when HDMI is connected. We may be missing kernel patches for this. hda-intel 0000:00:03.0: no codecs found! With a basic kernel patch to add 0x0a0c device ID to HDA driver and with HDMI cable connected it is much happier: snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 Change-Id: Ifa587984be4fc2801704a0368b9cdf8379c2450e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4318 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12slippy/falco/peppy: make GPIO interrupts be edge triggeredDuncan Laurie
The drivers are designed to work with an edge triggered interrupt. Change-Id: I35a121ecfb6409bb9049f4d1e034185bb3bb7557 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61664 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4360 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12falco: drive WLAN_DISABLE_L low in S3 and S5Aaron Durbin
When the board is in S3 and S5 the WLAN_DISABLE_L signal can leak power into the WLAN power well since the GPIO controlling WLAN_DISABLE_L is in the suspend well. Therefore, drive WLAN_DISABLE_L low to avoid the power leak. Change-Id: I1a0df80dd47fdbd535aca7a9d49253794c480606 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61421 Reviewed-on: http://review.coreboot.org/4358 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-12exynos5420: Setup clocks for MMC bus controller.Hung-Te Lin
To configure source clocks on Exynos 5420 for MMC drivers. Some registers are different from the 5250. FSYS now has two parts and MMC uses FSYS2. The MMC block uses MPLL as the clock source. The "high-speed" MMC interface runs as 52MHz, so divider is set accordingly. Also, the MMC driver has changed from MSHCI (Mobile Storage Host Controller Interface) to DWMCI (DesignWare MMC Controller Interface). Change-Id: I9ba9cf43e2f2dcd9da747888c0c7676bd545177b Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60858 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4354 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12peppy: Add backward-compatible RAM_ID table.Shawn Nematbakhsh
Make use of google_chromeec_get_board_version to determine board version, and apply proper RAM_ID table to load correct SPD. Change-Id: I6a2d54759cf2ce98bf53df0db396c6e09368c714 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61192 Reviewed-by: Dave Parker <dparker@chromium.org> Reviewed-on: http://review.coreboot.org/4353 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12Peppy: Update Realtek ALC283 verb tableMartin Roth
Update peppy's verb tables for the Realtek ALC283 Audio Codec. ALC283 Configuration: Digital Mic - NID 12h: Disabled Speakers - NID 14h: Enabled Mono out - NID 17h: Disabled Mic 1 - NID 18h: Disabled Mic 2 - NID 19h: Headphone Jack Line1 - NID 1Ah: Internal Mic Line2 - NID 1Bh: Disabled PCBEEP - NID 1Dh: Enabled SPDIF - NID 1Eh: Disabled HP-OUT - NID 21h: Headphone Jack Mic 1 doesn't seem to really be available, but the documentation refers to NID 18h as MIC1, so it's being disabled as it's not being used. The onboard microphone has been moved to line 1. I had my peppy modified to attach the mic to line1 and mic1 now works with this patch. Mic2 looks harder to rework, so I think that will have to wait for the DVT boards. Change-Id: I7d6ce6b428806b6aed1d36e7e25302fa5ae14b21 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: https://gerrit.chromium.org/gerrit/58880 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4352 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-12falco: fix usb port settingsDuncan Laurie
USB2 Port A set to 6.4" and Back Panel USB2 Port B set to 5.2" and Back Panel USB2 Port C set to 12.3" and Internal Other devices all set to Internal. build and boot on falco and check settings. Based on the config settings all ports end up with tuning param 1 == 5 and param 2 == 2 U2ECR[0] = 0x00059501 U2ECR[1] = 0x00059501 U2ECR[2] = 0x00059501 U2ECR[3] = 0x00059501 U2ECR[4] = 0x00059501 U2ECR[5] = 0x00059501 U2ECR[6] = 0x00059501 U2ECR[7] = 0x00059e01 Change-Id: I6b9e6df2679036a501355e6b389a486a6f178f99 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61297 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4350 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-12falco: Remove thermal thresholds that use CTDPDuncan Laurie
This CPU does not support Configurable TDP and so far does not need to use Controllable TDP. Change-Id: I15599cd4e6890dd5c9d9f99bc4e95307a8dcc827 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60657 Reviewed-on: http://review.coreboot.org/4347 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12PIT: remove a comment that is incorrect.Ronald G. Minnich
The is_resume comment is wrong for this board. It only applies to the older 5250 cpu. In fact, the is_resume parameter is not needed for ddr init and will likely be removed soon. Change-Id: I4e3c92fcaaa75d3c9223d90acccf053f61406307 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/60103 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4342 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12snow: Fix the edid data structure definition so depthcharge works again.Gabe Black
Some new fields were added to the edid data structure, and the edid code was changed to put estimated values into those fields which were ultimately passed into depthcharge or other payloads. On snow we do things different and just declare an edid structure statically which didn't have those members. The rows and columns of the graphics console were 0, and that confused the framebuffer driver and made it loop forever. Change-Id: I6ca3bd948482b347a6a981e83b82b10dca995e5e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/61057 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4341 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12peppy: RAM_ID + storage changes for next build.Shawn Nematbakhsh
- Update RAM_ID table. - Add DEVSLP0 signal to NGFF SATA port. Note: After this change, old Micron 2GB boards will no longer boot. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: Id68a1d6ace2702cca9c37305726cd55a0bde5005 Reviewed-on: https://gerrit.chromium.org/gerrit/60167 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Dave Parker <dparker@chromium.org> Reviewed-on: http://review.coreboot.org/4340 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12peppy: Disable audio codec enable GPIO in S3 + S5.Shawn Nematbakhsh
To save power, disable audio codec in S3 + S5. Also, refactor Lynxpoint GPIO code slightly to allow usage in SMM binary. Change-Id: I55c4248c89a258b5e4cecf8579eb58f1c15430c0 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60950 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4339 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-09AMD boards: Fix includes for microcode updatesKyösti Mälkki
No ROMCC involved, no need to include .c files in romstage.c. Change-Id: I8a2aaf84276f2931d0a0557ba29e359fa06e2fba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4501 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-07peppy: Enable power limiting for thermal controlDuncan Laurie
Limit power to 12W at 73C and remove limit at 68C. To have the CPU consume maximum power it is necessary to stress both the CPU and the GPU. Bastion (chrome.supergiantgames.com) and/or webglsamples.googlecode.com can be useful for this. Testing this properly requires a script to report the running average power readings. The watch_power.sh script is attached to this issue in the partner tracker. 1) Run watch_power.sh continuously: localhost ~ # watch -n 0 bash -e /tmp/watch_power.sh 2) Start Bastion (or other stress apps). The power draw should be close to 15W if under enough load. 3) Watch until temperature climbs above 73C and is caught by the thermal zone 10 second poll, this can be sped up by blocking or removing the fan. 4) The ACPI thermal zone states should change to reflect that active[2] is now enabled and power consumption should drop to 12W. 5) Stop the stress apps and wait until the CPU cools off again, enable the fan again if it was removed. 6) The ACPI thermal zone state should switch back to active[3]. Change-Id: Ie6714a8543d4f06edf8513086fc9c968273bdb23 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60545 Reviewed-on: http://review.coreboot.org/4335 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-07Correct file permissions.Idwer Vollering
Some files have incorrect/odd permissions, correct them: remove unnecessary +x flags. Change-Id: I784e6e599dfee88239f85bb58323aae9e40fb21c Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4490 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-12-06butterfly: Fix build without ChromeOSKyösti Mälkki
Use a file in CBFS for keyboard layout and ethernet MAC instead of scanning FMAP. Change-Id: I7658c7c4e389deb20d7d8f57cce8b568efdc575d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4307 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-06qemu: fix GENERATE_ACPI_TABLES=n in fw_cfg.cGerd Hoffmann
Change-Id: Ib8dc069c9e503747c349e96a466feb42279afd08 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/4305 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-05google/link: use the new edid functions when in FUI modeRonald G. Minnich
The new edid functions support converting the edid to an lb_framebuffer. Use them. Also, since panels seem to set bits per color instead of bits per pixel, just force the right value in the edid struct. Add helpful comment because people don't always believe we need to set the pallette. While we're at it, fix a problem that caused it to not compile. Change-Id: I645edc4e442d9b96303d9e17f175458dc7ef28b6 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/57619 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4327 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-05peppy: Disable forced dev mode.Shawn Nematbakhsh
Don't force dev mode. Allow users to enter / exit dev mode as normal. Change-Id: I168eb04a8ac102a8c4a1ca8936f78f62b001e0eb Reviewed-on: https://gerrit.chromium.org/gerrit/59492 Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Reviewed-on: http://review.coreboot.org/4321 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-05Fix Makefile to include all copies of the SPD sourcesDuncan Laurie
On some systems there may be 2GB SKU that is the same as the 4GB SKU but just one channel of memory. In that case we need to ensure that both copies of the same SPD source end up populated by ensuring that repeated entries are included by using $+ instead of $^. Alternatively we could do the check inside romstage, but it is already set to behave this way if the SPD gets populated correctly. I changed spd_index to 3 in falco romstage to force it to pretend it was a 2GB config of the same memory, then booted to ensure it was indeed limited to 2GB. memcfg channel[0] config (00780008): ECC inactive enhanced interleave mode on rank interleave on DIMMA 2048 MB width x16 single rank, selected DIMMB 0 MB width x16 single rank memcfg channel[1] config (00600000): ECC inactive enhanced interleave mode on rank interleave on DIMMA 0 MB width x8 single rank, selected DIMMB 0 MB width x8 single rank Change-Id: Ibfe5051ccda2fe69e8caff3f3c264116e3411c65 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59483 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Jay Kim <yongjaek@chromium.org> Reviewed-on: http://review.coreboot.org/4319 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-05AMD Kabini: fix issue 'S3 fails to suspend after wake up from USB keyboard'Zheng Bao
Propagated from http://review.coreboot.org/3347 http://review.coreboot.org/3374 The cause of this issue is: USB devices use bit 11(0x0b) of GP0_STS represents S3 wake up event, but this bit is not clear after wake up. So OS thinks there is a wake up signal and wake up immediately. Both amd/olivehill and asrock/imb-a180 have been validated. Change-Id: I7c26cb07bcd2e62bb792809b67314e5155c6adf6 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/4261 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-05AMD Kabini: Add ACPI sleep/wakeup calls for southbridgeZheng Bao
The AML code of PTS and WAK for southbridge are in UINT8 AlibSsdtKB[], Proc/GNB/Modules/GnbInitKB/AlibSsdtKB.h. It was integrated into SSDT even it was called by nobody. The source ASL was provided by AGESA for reference, but it has been scrubbed when it was ported to Coreboot. Without the calls, Olive Hill can not wake up if it boots Windows. Both amd/olivehill and asrock/imb-a180 have been validated. Change-Id: Ia7bba29904dbd6f33fdb08bf88bb499005ef561b Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/4260 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-04lenovo/x60: Drop global oprom_is_loadedKyösti Mälkki
Variable use is specific to ChromeOS. Change-Id: I5b61a038e6b08e3b2408c4d990749d45fdf2148d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4306 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-12-04lumpy: Fix build without ChromeOSKyösti Mälkki
Change-Id: I1a59405499deceed7df01a03834be72830e6578f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4291 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-04intel/cougar_canyon2: Intel CRB FSP based mainboardMarc Jones
Cougar Canyon 2 is a Ivybridge/PantherPoint reference board. This implementation uses the Intel FSP (Vist the Intel FSP website for details on FSP architecture and support). The FSP does not support s3 at this time. S3 may be added when it is available in the FSP. All other features and IO ports are functional. Booted on Ubuntu 12.04 and 13.04, Fedora 18 with SeaBIOS payload. Memtest86, FWTS, and other tests pass. Board support page will be updated on acceptance. Change-Id: I26c0b82d7ac295498376ad4c3517a9d6660d1c01 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4018 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-03qemu-armv7: Drop additional console_init()Stefan Reinauer
It's done in bootblock_simple.c just after returning from the mainboard specific bootblock function. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I96cab5e406132a9f7dc30d48ff99f524773a1a14 Reviewed-on: https://gerrit.chromium.org/gerrit/58473 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4257 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-12-03slippy/falco/peppy: Fix Chrome OS GPIO export in ACPIDuncan Laurie
The OIPG package needs to have >1 member to make the chromeos_acpi kernel driver do the right automagic sysfs topology creation. Additionally an "unimplemented" GPIO should be reported as 0xFF because 0 is a valid GPIO number. verify crossystem on slippy $ sudo crossystem | grep -e recoverysw_cur -e wpsw_cur recoverysw_cur = (error) wpsw_cur = 1 Change-Id: I06dff09152bde30a3ffe58b1defe9d299155472c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57471 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4221 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-03haswell boards: Enable VIRTUAL_DEV_SWITCHDuncan Laurie
This config option was not enabled which was preventing the user from enabling developer mode from recovery mode. With this enabled we can disable the "dev mode by default" behavior and let people enable it by entering recovery mode. This will make the firmware behave like a typical chromeos device. Peppy is left in "default dev mode" until after bringup. 1) boot slippy in normal mode by default 2) enter recovery mode with servo button 3) Ctrl+D on USB keyboard to enter developer mode 4) boot slippy in developer mode Change-Id: I414c0d10dd0489e3c89798f75a2872a43297c8d8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57350 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4220 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-02Add option to disable ChromeOSKyösti Mälkki
Those building Chromebook firmware from coreboot git might be more interested in building without ChromeOS extras. Change-Id: I2f176d059fd45bf4eb02cc0f3f1dcc353095d0ce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3977 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02Introduce a config whether dock is inited in romstage or notVladimir Serbinenko
Instead of depending on exact mobo configure general characteristic whether dock is configured in romstage or ramstage. X60 and T60 have superio in dock so it needs to be inited to get serial, so it should be inited in romstage. On X201 there is nothing useful that early in boot but it's needed to init more to get dock working, in particular EC init needs to be done first. Change-Id: If5072e3dec883a94cd2d5643a92f7f6c3c9feee9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4294 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-02EC H8: remove dependence on IS_X201Vladimir Serbinenko
Instead define brightness up/down function and gfx device and use preprocessor magic to glue it together. Change-Id: I03074ae07b33c1546d229efc3e80606ddbee6300 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4282 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-12-02global: Fix usage of get_option() to make use of CB_CMOS_ codesAlexandru Gagniuc
Do not directly check the return value of get_option, but instead compare the returned value against a CB_CMOS_ error code, or against CB_SUCCESS. Change-Id: I2fa7761d13ebb5e9b4606076991a43f18ae370ad Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4266 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-02haswell: Update pei_data to match ref codeDuncan Laurie
- Add a new USB location field - Add a new "ddr_refresh_2x" field, enabled on Falco only - Fix copy+paste bug in baskingridge Checked that tREFI is halved during memory setup in the memory training log: tREFImin = 6240 << DEFAULT C(0).tREFI = 0xc30 << MODIFIED (=3120) C(0).tREFI = 0xc30 << MODIFIED (=3120) Also ensure that the SD card is detected properly again. Change-Id: Ie3a82c08df06ada9af56282b5255caefa56487f2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57349 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4219 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02falco: Update panel power sequence timingsDuncan Laurie
These are based on the datasheet and I included the timing values I used from the docs. Change-Id: Ib75b2c5e50ac09d1e4cf9dd22229bb0f0a8965a4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58540 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4234 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02peppy: Port updates from slippy/falco boardsDuncan Laurie
- Add HDA verb table - Add on-board device table - Add panel power sequencing values Change-Id: I1b3450c2740ec1d930f157a9b23550e1efc8668f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58197 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4233 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02lenovo/x60: Add "IBM ThinkPad Embedded Controller" SMBIOS OEM StringPeter Stuge
The Linux thinkpad_acpi.c driver looks for this string while reading information about the system it is running on. This commit does not make the module load but it is one of several things that the module looks for on a ThinkPad. Change-Id: Ia48bbd85ba4d528063695345b0f968d264573341 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3779 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-02peppy: Add 2GB DRAM configuration.Shawn Nematbakhsh
Currently, all Peppy boards w/ '000' SPD GPIOs have 2GB DRAM. Disable the second DRAM channel based upon the GPIOs. Need to change / confirm this for upcoming builds. Change-Id: I7085ddecb80626cc0bed99ba7b174c6b80350696 Reviewed-on: https://gerrit.chromium.org/gerrit/58620 Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4238 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-02peppy: Re-enable EC software syncShawn Nematbakhsh
The EC was disabling flash commands and sysjump was not working properly. With those two fixed software sync works properly. (Taken from I63ca00d6c94854f2b395eb736ce20792da5f8de2). Change-Id: I9c7d1d1f1aaf7de33d0cec5f6daf648576ba8900 Reviewed-on: https://gerrit.chromium.org/gerrit/57289 Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4212 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-02peppy: Update GPIO table + USB port map.Shawn Nematbakhsh
- Update GPIO table to match board. - Update USB port map. - Remove iSSD power sequencing code. Change-Id: Iaa8e5921ed9db6bcfd18b5a888c7f80b2c93a710 Reviewed-on: https://gerrit.chromium.org/gerrit/56869 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4211 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02Add description to MAINBOARD_VENDOR string so it can be overriddenDuncan Laurie
A quirk of the Kconfig used in coreboot is that config options cannot be overriden by local config changes unless they have a description string. 1) Add CONFIG_MAINBOARD_VENDOR="Custom" to local config 2) Build and flash coreboot 3) cat /sys/class/dmi/id/sys_vendor and look for "Custom" Change-Id: I1b5f2124cd4a22c056c025143ae5bcaafa6b03f0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59088 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4248 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02peppy: Add an inverted input GPIO typeShawn Nematbakhsh
The wake device input pins are active low and the GPIOs need to be set as inverted when they are marked as an input so they are not spuriously logged. Also sync pin states from Falco initial commit. Reference change: I15d38dcc9b2fb4b2b0eb27da358fa3c343e22323 Change-Id: I66e136d389d53a367436d816fa84dacdc8e86bad Reviewed-on: https://gerrit.chromium.org/gerrit/58334 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@google.com> Reviewed-on: http://review.coreboot.org/4247 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02falco/slippy: Fix DMIC nid verb.Dylan Reid
Set nid 0x12 instead of nid 0x05. The DMIC is on NIC 0x12. Change-Id: Ifc883b65a50aeec6a6d3ad02fe8418f124e6241d Signed-off-by: Dylan Reid <dgreid@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58711 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Commit-Queue: Duncan Laurie <dlaurie@chromium.org> Tested-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Jay Kim <yongjaek@chromium.org> Tested-by: Jay Kim <yongjaek@chromium.org> Reviewed-on: http://review.coreboot.org/4246 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-01slippy/falco/peppy: Fix SPD GPIO initialization.Aaron Durbin
SPD GPIOs were being read prior to initialization in romstage_common. To fix, pass the copy_spd function to romstage_common, to be called at the appropriate time (after PCH init, before DRAM init). Change-Id: I2554813e56a58c8c81456f1a53cc8ce9c2030a73 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58608 Reviewed-on: http://review.coreboot.org/4237 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-01Butterfly: Force DDR refresh rate to 2x.Shawn Nematbakhsh
Due to OEM request, always set DDR refresh rate at 2x. Change-Id: I81a4f57aca6388551dca6effbd9a4ac1a97e4f5a Reviewed-on: https://gerrit.chromium.org/gerrit/50477 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4214 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-01H8: Move EC GPE declaration to mainboardVladimir Serbinenko
Change-Id: Iefc481f09268dd15bbc3cbfa8bdd110d44383f6a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4281 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-26lynxpoint: Add an inverted input GPIO typeDuncan Laurie
The wake device input pins are active low and the GPIOs need to be set as inverted when they are marked as an input so they are not spuriously logged. suspend/resume on slippy with trackpad wake: 8 | 2013-05-29 07:43:14 | ACPI Enter | S3 9 | 2013-05-29 07:43:18 | ACPI Wake | S3 10 | 2013-05-29 07:43:18 | Wake Source | GPIO | 12 and with power button wake: 11 | 2013-05-29 07:43:35 | ACPI Enter | S3 12 | 2013-05-29 07:43:40 | EC Event | Power Button 13 | 2013-05-29 07:43:40 | ACPI Wake | S3 14 | 2013-05-29 07:43:40 | Wake Source | Power Button | 0 Change-Id: I15d38dcc9b2fb4b2b0eb27da358fa3c343e22323 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56940 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4209 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-26google/parrot/smihandler.c: Use `battery_critical_logged` only with `ELOG_GSMI`Paul Menzel
Make the declaration and use of it conditional on the ELOG_GSMI Kconfig variable. Change-Id: I2ef291d2f3e7d35545014e03ba8e0045da6050e5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3987 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-26slippy/falco: Re-enable EC software syncDuncan Laurie
The EC was disabling flash commands and sysjump was not working properly. With those two fixed software sync works properly. Google Chrome EC MKBP driver ready, id 'slippy_no_version' Clearing the recovery request. EC hash:7fea29992ef72e3e64d8ffe522aa1dfa68dcb44a2da96a4c19530ea1a0bd22c4 EC-RW hash address, size are 0xffa1cfe8, 32. Hash = 727e79934d9394184da496cebc27f7275b9d2d91079bf125d8f977a1f8aa4cde Expected hash:727e79934d9394184da496cebc27f7275b9d2d91079bf125d8f977a1f8aa4cde EC-RW firmware address, size are 0xffad000c, 57180. VbEcSoftwareSync() - expected len = 57180 Computed hash of expected image:727e79934d9394184da496cebc27f7275b9d2d91079bf125d8f977a1f8aa4cde VbEcSoftwareSync() updating EC-RW... VbEcSoftwareSync() jumping to EC-RW VbEcSoftwareSync() in RW; done Change-Id: I63ca00d6c94854f2b395eb736ce20792da5f8de2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56821 Reviewed-on: http://review.coreboot.org/4208 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-11-26falco: update verbs for ALC283Duncan Laurie
Set verbs to reflect the layout used for ALC283 in Falco, which ends up being the same as Slippy. Change-Id: I3dce4effefaa91ee5bdcbe2a8a3750ebc41376ad Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58196 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4232 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25slippy: update verbs for ALC283Dylan Reid
Set verbs to reflect the layout used for the ALC283 in slippy. install on slippy and check that headphone switch works as does external mic. Change-Id: I2d6bcda9cf8bbf49cbb6d2dbbe7f1a5adf315d8a Signed-off-by: Dylan Reid <dgreid@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57560 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4224 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25peppy: Add Elipda DIMM SPDShawn Nematbakhsh
Peppy RAM ID table is as follows: 000 41K256M16HA 001 H5TC4G63AFR 010 EDJ4216EFBG Elpida SPD taken from Ib1e430cd390b4dbc013fc0802f1a59c1a0412577 by dlaurie. Change-Id: Iac156a2d25435514f28e2e73bef617d0fe2d90a1 Reviewed-on: https://gerrit.chromium.org/gerrit/56687 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4201 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25peppy: Initial mainboard commitShawn Nematbakhsh
Taken directly from slippy with only constant + string changes. (Peppy port of I4172460d3b075bfd5bb22013a6225cf0e8f95b9c by dlaurie) The following changes are required in a subsequent commit: - Add Elpida SPD data. - Update GPIO map. - Remove iSSD power sequencing. - Update USB port map. Change-Id: I01dfb841f0e9186cf8a0a23f72e7be986a83be42 Reviewed-on: https://gerrit.chromium.org/gerrit/56513 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4200 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25falco: Update DIMM SPD tableDuncan Laurie
RAM_ID indices have been changed and settled on a 2GB config that will be the same DRAM chips but only used in one channel. Change-Id: I444e655883ae045622ab3dfb964da4d7f86e1c0d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56810 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4198 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25falco: Add panel power sequence timingsDuncan Laurie
These are placeholder values until we can configure for the exact panel. Change-Id: If40367c0e5f80d46d085c89b0edae60f1ccacdaf Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56808 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4197 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25falco: Add on-board devices and configure GPIO irq/wakeDuncan Laurie
Add the onboard I2C devices for Falco trackpad/lightsensor and generate SMBIOS Type41 tables for them. Add ACPI device for the trackpad to expose the interrupt map to the OS so it can be used. Configure interrupt GPIOs as PIRQ type and wake GPIOs as just standard input type. The wake GPIO is reconfigured as ACPI SCI in the specific device _DSW method. This prevents the wake GPIO from generating a flood of SCI at runtime. LTE_WAKE_L_Q and WLAN_WAKE_L_Q are left as ACPI SCI as these are not repurposed interrupt pins so they are not generated at runtime. SIM_DET and ALS_INT_L are set as input since we don't have an interrupt handler for them. Change-Id: Ibe9687b2f7f41ead18353c3f650219fe6e94ae2f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56632 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4191 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 16:09:42 +0000