summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-08-09soc/mediatek/mt8173: Remove dual DSI modeHung-Te Lin
The 'dual DSI mode' was never used by any real boards running coreboot and is introducing lots of complexity when it comes to refactoring. In order to create a common display stack for MTK SOCs, we want to first drop dual DSI mode so 8173 and 8183 DSI/DDP implementation will be more similar to each other. BUG=b:80501386,b:117254947 TEST=emerge-oak coreboot Change-Id: I357c30cc687803ca8045d0b055dec2e22eef4291 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34693 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-09mb/google/sarien/variants/sarien: Set PCH Thermal Trip point to 77 degree CSumeet Pawnikar
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal Shutdown when S0ix is enabled. BUG=None BRANCH=None TEST=Verified Thermal Device (B0: D20: F2) TSPM offset 0x1c [LTT (8:0)] value is 0xFE on Sarien. Change-Id: Ibc336be0523ff4e65a818474907faf20fc417ff4 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-09mb/google/sarien/variants/arcada: Set PCH Thermal Trip point to 77 degree CSumeet Pawnikar
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown when S0ix is enabled. BUG=None BRANCH=None TEST=Verified Thermal Device(B0: D18: F0) TSPM offset 0x1c [LTT (8:0)] value is 0xFE on Arcada. Change-Id: I1915b974b10638b0f6ab97c6fb9b7a58d2cabc59 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-09mb/google/hatch: Refactor override_early_gpio_tableTim Wawrzynczak
There was the potential for misuse of the override early GPIO table, because if the override early GPIO table did not have a corresponding entry in the base table, it would not get overridden, and there was no way to know except manual inspection (this has already happened here), so now all hatch mainboards are required to explicitly list out all of their required early GPIOs. TEST=booted several hatch boards, verified that they can communicate with TPM and successfully train memory Change-Id: I0552b08a284fd6fb41a09fef431a0d006b0cf0bd Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-08-08mainboard/emulation/qemu-aarch64: Add new board for ARMv8Asami Doi
This CL adds a new board, QEMU/AArch64, for ARMv8. The machine supported is virt which is a QEMU 2.8 ARM virtual machine. The default CPU of qemu-system-aarch64 is Cortex-a15, so you need to specify a 64-bit cpu via a flag. To execute: $ qemu-system-aarch64 -M virt,secure=on,virtualization=on \ -cpu cortex-a53 -bios build/coreboot.rom -m 8192M -nographic Change-Id: Id7c0831b1ecf08785b4ec8139d809bad9b3e1eec Signed-off-by: Asami Doi <d0iasm.pub@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-07mb/google/hatch: Kohaku: Re-setup dual-routing of EMR_GARAGE_DETTim Wawrzynczak
The pinctrl driver in the linux kernel automatically turns off SCI routing for all GPIOs exported via ACPI, so this patch sets up dual-routing of the EMR_GARAGE_DET signal so that one can be used for IRQs and one for the SCI wake. Change-Id: Iadeb4502c5a98a72ba651bdcad626609656c196f Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34780 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-07mb/google/hatch: Kohaku: Add touchscreen controller to device treeTim Wawrzynczak
The touchscreen controller was never added to the device tree, and the next board rev will have this IC connected. Set it up in the device tree with conservative power resource timings from the datasheet. BUG=b:138869702 BRANCH=none TEST=compiles; current board rev does not have touch IC Change-Id: I759fb32f31c8eee0e6bd664c6a82308354ef5d08 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-07mb/google/kohaku: Enable stylus pen deviceSeunghwan Kim
Enabling stylus pen device and pen_eject event. - Adding enable_gpio for power sequencing - Configuring GPP_H4 and GPP_H5 as native function - Adding PENH device node for pen ejection event BUG=b:137326841 BRANCH=none TEST=Verified pen input operation and pen_eject event (pop-up and wake from s0ix on pen ejection) Change-Id: Ic252a1f90c0fc6cb9b1e426d75a8b503824681f3 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-08-07opencellular/rotundu: Disable HAVE_ACPI_RESUME supportKyösti Mälkki
FSP1.0 has low memory corruptions below CONFIG_RAMTOP on S3 resume path, as romstage ram stack will be utilised before there is a chance to make the necessary backup to CBMEM. Previously done for intel/minnowmax in commit b6fc727. Change-Id: I2e128079b180f9978e8519b190648d516aaee0dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34673 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-07mb/google/octopus: Add custom SAR value for VortininjaWisley Chen
Vortininja needs different SAR values than meep. Use sku-id to load SAR values. BUG=b:138261454 BRANCH=octopus TEST=build and verified SAR values by sku id Change-Id: I7b3ab51e1d6cada4faaba1b9d72bd9eacf6b04dd Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-08-06src/mainboard/up/squared: Add Support for iTPMChristian Walter
Add support for the integrated TPM in Kconfig and update device tree. Change-Id: I3a51545c493674aeed9aef72db24f77315d033ce Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-08-05mb/google/helios: Set SPKR_PA_EN PIN high for boot beepSubrata Banik
This patch makes SPKR_PA_EN PIN output and high for boot beep to work in pre-os environment. BUG=b:135104721 BRANCH=NONE TEST=Boot Beep is working with required ALC1011 depthcharge code changes. Change-Id: I012462f93e9e2bcafe5f18ce7d04e3fcd1db9ffa Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Usha P <usha.p@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
2019-08-05mb/google/octopus: Add EMRight digitizer supportWisley Chen
The device Vortininja uses the variant meep, and supports WACOM/EMRIGHT digitizer. BUG=b:138276179 BRANCH=octopus TEST=verified that WACOM/EMRIGHT digitizer can works. Change-Id: I2bed4edb0261953f122f1d9ccca1fe4fa9406b33 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-08-05mb/google/drallion: Add new mainboardThejaswani Putta
Drallion is a new mainboard using Intel Comet Lake SOC. As a starting point, I took mainboard/sarien as the reference code and modified WHL to Comet Lake. BUG=b:138098572 Test=compiles Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com> Change-Id: I541952a4ef337e7277a85f02d25979f12ec075c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34497 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-05mb/google/sarien: Increase Wacom touchscreen reset delay to 120 msCasper Chang
Increase reset delay to 120ms of touchscreen to meet wacom touchscreen T4 specification and resolve re-bind hid over i2c driver failed after touchscreen firmware auto update. BUG=b:132211627 TEST=Stress touchscreen firmware auto update 200 times and not found re-bind driver failed. Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I488660aefdc6df27077efc7fec2f3b99adbaef9f Reviewed-on: https://review.coreboot.org/c/coreboot/+/34665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Hsieh <mike_hsieh@wistron.corp-partner.google.com> Reviewed-by: Nick Crews <ncrews@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-08-05mb/cubietech/cubieboard: Remove boardArthur Heymans
The Allwinner code was never completed and lacks a driver to load romstage from the bootblock. Change-Id: I12e9d7213ce61ab757e9317a63299d5d82e69acb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33132 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-03mb/google/hatch/variants/helios: Adjust all I2C CLK and I2C0 SDA hold timeFrank_Chu
After adjustment Touch Pad CLK: 383.4 KHz Touch Screen CLK: 381.6 KHz Audio codec CLK: 386.0 KHz TouchPad SDA hold time: 0.325ns BUG=b:137722634 BRANCH=none TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I27dec2f3e00eb6618cc429aff3dae7a5d937d638 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-08-03mb/google/octopus: Add custom SAR values for droid/blorbSheng-Liang Pan
droid/blorb needs to use different SAR values than bobba. Use sku-id to load the SAR values. BUG=b:138091179 BRANCH=octopus TEST=build and verify SAR load by sku-id Change-Id: I71b5d69ffbba82018a682202df73b604332dd9e7 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34542 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-03mb/emulation/qemu-riscv: Add opensbi supportPatrick Rudolph
Tested on qemu-riscv: Boots into Linux until initrd should be loaded. Change-Id: I4aa307c91d37703ad16643e7f8eb7925dede71a8 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-08-03mb/google/hatch: Enable PmTimerDisabled config to reduce S0ix power usageSubrata Banik
BRANCH=none BUG=b:138152075 TEST=Build for cometlake board with the PmTimerDisabled policy in devicetree set to 1. With PmTimerDisabled = 0 >> iotools mmio_read8 0xfe0018fc 0x00 With PmTimerDisabled = 1 >> iotools mmio_read8 0xfe0018fc 0x02 Bit 1: ACPI Timer Disable (ACPI_TIM_DIS): This bit determines whether the ACPI Timer is enabled to run. - 0: ACPI Timer is enabled - 1: ACPI Timer is disabled Change-Id: I83f49505a804c99d7978e5d541ea9fe8ead9b88f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-08-02mb/google/hatch: Fine-tune Kohaku I2C CLK frequencyPhilip Chen
Add rise time / fall time to I2C config in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (400 kHz). BUG=b:138258384 BRANCH=none TEST=probe I2C0/I2C2/I2C3 SCL on Kohaku board, verify all of them run at 395-399 kHz. Change-Id: Id98079e717f0db3fdcb88f85e45693925d11d7fd Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34559 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-02soc/intel/icelake: Make use of common thermal code for ICLSubrata Banik
This patch ports CB:34522 and CB:33147 changes from CNL to ICL. TEST=Build and boot dragonegg Change-Id: I0b983005f16fe182e634eac63fef4f6b22197a85 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34649 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-02soc/intel/skylake: Make use of common thermal code for SKLSubrata Banik
This patch ensures skylake soc is using common thermal code from intel common block. TEST=Build and boot soraka Change-Id: I0812daa3536051918ccac973fde8d7f4f949609d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34648 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/hatch: Initialize SSD GPIOs in bootblockShelley Chen
Moving these to bootblock as we are seeing some instances where devices are rebooting into the recovery broken screen with the 0x5a error (no bootable storage device in system). This needed to be done for KBL platforms and never got transferred to hatch. Please reference https://review.coreboot.org/c/coreboot/+/23647 BUG=b:137681648 BRANCH=None TEST=Run autotest faft_bios and faft_ec suites Change-Id: I8cf09c26d77d890f5d0490709504e9edf485a93f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34484 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/kohaku: Update DPTF parameters and TDP PL1/PL2Seunghwan Kim
Applying first tuned DPTF parameters and TDP PL1/PL2 values for kohaku. More fine-tuning will happen later. BUG=b:1704071 BRANCH=none TEST=build Change-Id: I8a87ff88e8e14ada473f9da59c15cdc779cbb108 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34397 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/hatch/variants/hatch: Set PCH Thermal Threshold value to 77 deg CSumeet Pawnikar
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal Shutdown when S0ix is enabled. BUG=133345634 BRANCH=None TEST=Verified Thermal Device (B0: D20: F2) TSPM offset 0x1c [LTT (8:0)] value is 0xFE on Hatch. Change-Id: Ib20fae04080b28c6105e5a187cc5d7a55b48d709 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33147 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/kukui: Enable config for coreboot displayYongqiang Niu
BUG=b:80501386,b:117254947 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I478e06686158dd77b075bcef8a41763ae26c79f9 Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31521 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/octopus: Override DDI1 DDC SDA/SCL for HDMIWisley Chen
The device Dorp uses the variant Meep, and supports HDMI. -sku33 (HDMI) -sku34 (HDMI + keyboard backlight) -sku35 (HDMI + Touchscreen) -sku36 (HDMI + keyboard backlight + Touchscreen) BUG=b:136522841 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I59ba2e56cf2f83ca9d533454570bcdd39c0a2e7c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34509 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/octopus: Override VBT selection for DorpWisley Chen
For dorp HDMI sku, select VBT which enables HDMI output. -sku33 (HDMI) -sku34 (HDMI + keyboard backlight) -sku35 (HDMI + Touchscreen) -sku36 (HDMI + keyboard backlight + Touchscreen) Cq-Depend: chrome-internal:1502253 BUG=b:136522841 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I62262378f85bb899073ffac7804be876e649e429 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-07-30mb/google/hatch: Enable chipset_lockdown coreboot config for hatchSubrata Banik
This patch enables lockdown configuration for hatch family (hatch, kindred, helios and kohaku) BUG=b:138200201 Change-Id: Ia6dc90156dc76fde490b25cf833da3cf80f664f2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-30mb/google/hatch: Add option to enable WiFi SAR configsFurquan Shaikh
This change adds a user selectable option to enable all WiFi SAR configs that apply to hatch. BUG=b:138177048 Change-Id: I4b72f90896841e7c556d4a1b8cdad8ca89d01021 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-30mb/emulation/qemu-riscv: Protect CBFS from payload loaderPatrick Rudolph
The virt machine is special as it doesn't emulate flash and it puts the coreboot.rom at start of DRAM. The payload loader doesn't know about CBFS in DRAM and overwrites the CBFS while decompressing payloads, resulting in undefined behaviour. Mark the region as SRAM to make sure the payload won't overwrite the CBFS while decompressing. As payload is always decompressed to DRAM, it wouldn't touch SRAM memory regions. Change-Id: I36a18cb727f660ac9e77df413026627ea160c1e1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-07-29mb/emulation/qemu-riscv: Fix regressionPatrick Rudolph
Fix regression introduced in bd4bcab "lib: Rewrite qemu-armv7 ramdetect". The detected DRAM size is in MiB, thus needs to adjusted accordingly before passed to ram_resource. Wasn't seen earlier as everything works, except payload loading. Change-Id: I4931372f530e7b4e453a01e5595d15d95a544803 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-07-29src/mainboard/{cavium,sifive}: Use $(obj) instead of buildRaul E Rangel
The build directory might not exist in the src dir. BUG=b:112267918 TEST=make what-jenkins-does Change-Id: I2d4fa6cc455592f92070796cd065cd66646d5ba9 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-29mb/google/octopus: Add keyboard backlight supportWisley Chen
Dorp device support keyboard backlight, so enable it. BUG=b:138413969 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: If0c7b22b4be2a5d5216404a6944ac887883e9a47 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-07-28lib: Rewrite qemu-armv7 ramdetectPatrick Rudolph
* Move armv7 RAM dection to a common place * Enable it for all emulated platforms * Use 32bit probe values and restore memory even on failure * Use the new logic on the following boards: ** qemu-armv7 ** qemu-riscv Tested on qemu-system-riscv: Fixes kernel panic due to wrong memory limits reported. Change-Id: I37386c6a95bfc3b7b25aeae32c6e14cff9913513 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-28mainboard/facebook/fbg1701: Add VBT binaryFrans Hendriks
Add VBT 8.0.1038 binary. Panel #10 is modified to support the 1200x1920 LCD panel. This panel is configured as default. LCD and HDMI are working fine. BUG=N/A TEST=booting Facebook FBG1701 Change-Id: If327e4e071df61b02fcec45213c2b700320ef269 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-26arch/ppc64: Make PPC64 stages select ARCH_PPC64Arthur Heymans
Also don't define the default as this result in spurious lines in the .config. This also cleans up an unused Kconfig file. In the generated config.h CPU_QEMU_POWER8 is gone as expected and ARCH_RAMSTAGE_PPC64 moves a few lines, but the value stays the same. Change-Id: I70b64e49e1ce07b8f30d9bbc493272bdfb3bb0bf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-26mb/google/hatch/helios: Update GPIO and device treeTim Wawrzynczak
Based on updated schematics, change polarity of USI_INT, and add the reset and enable GPIOs to the touchscreen ACPI node. The stop GPIO can't be used with the current implementation of _ON, as the way it's wired will cause power sequencing to fail. BUG=b:137133194, b:138240502 BRANCH=none TEST=Compiles, don't have next board rev to test with Change-Id: I1dfb8e649418e4c5e9b897fb4bc11393adc21ea2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-25mb/purism/librem_skl: use SOC_INTEL_COMMON_BLOCK_HDA_VERBMatt DeVillier
Remove old hda_verb.c code copied from intel/kblrvp7, as it's been superseded by the common block HDA implementation. Fixes a null pointer error preventing the HDA codecs from being initialized, as found in Coverity CID 1403651. Test: build/boot Librem 13v2, verify functional audio Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I2fd5363aad027f215f93964bc6a85f00fea86c88 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34531 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25mb/getac/p470: Remove unneeded whitespacesElyes HAOUAS
Change-Id: I8e36dc1553faa618aa852c06861029b4c0bdb27a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-07-25mb/google/poppy/variant/nami: add sku ids of bardRen Kuo
add two sku ids of bard: 0x1009CE0 0x1009CE2 BUG=b:137892804 TEST=emerge-nami coreboot Change-Id: I299ccb36739d83e38f37e0b2cbba44c34343c975 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25mb/*/chromeos.c: Remove some ENV_RAMSTAGE and __SIMPLE_DEVICE__Kyösti Mälkki
Use explicit simple PCI config accessors here. Change-Id: Ifa3814fdd7795479ca5fdbfc4deb3fe8db9805f3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-23mb/google/octopus/variants/fleex: Remove gpio NC setting for enabling I2C0Frank Wu
Enable I2C0 in fleex then verify EMR function successfully BUG=b:135968368 BRANCH=octopus TEST=EMR function working normally with I2C0 in Grob360S. Change-Id: I784ff32418bc839bcec14fbfd7236f708828690e Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-23mb/google/hatch: Add FP MCU to helios device treePhilip Chen
BUG=b:136606255 Change-Id: I8fa29dc96e7a066f6708ede6b7bee2382c7008cb Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21mediatek/mt8183: support more EMCP LPDDR4X DDR bootupHuayang Duan
Support SANDISK SDADA4CR-128G, SAMSUNG KMDP6001DA-B425, KMDV6001DA-B620 EMCP LPDDR4X DDR bootup. BUG=b:80501386 BRANCH=none TEST=Boots correctly on EMCP DRAM Change-Id: I7de4c9a27282d3d00f51adf46dcb3d2f3984bfff Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-07-21mb/google/kukui: Introduce a new 'Jacuzzi' familyHung-Te Lin
The 'Jacuzzi' is a different base board that will share most of Kukui design. For AP firmware, there will be only a few changes expected, mostly in display (for MIPI bridge) and EC/keyboard so we want to create it as variants inside Kukui folder, not forking a new directory. BUG=b:137517228 TEST=make menuconfig; select 'krane' and build; select 'jacuzzi' and build. Change-Id: Ic2b04e01628dc3db40f79f9bbdd5cc77d9466753 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34344 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21soc/intel: Expand SA_DEV_ROOT for ramstageKyösti Mälkki
We do not want to disguise somewhat complex function calls as simple macros. Change-Id: I298f7f9a1c6a64cfba454e919eeaedc7bb2d4801 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21mb/google/hatch: Remove hatch_whlPhilip Chen
Hatch_whl variant is deprecated. BUG=b:137180390 Change-Id: I88fa201398ad5fb70da48d022f1ae86fecafa660 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34432 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21mainboard/google/kahlee: create treeya variantChris Wang
This is based on the grunt variant. BUG=b:135551210 BRANCH=none TEST=emerge-grunt coreboot chromeos-bootimage Ensure that image-treeya.*.bin are created Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I40f3c9de87350777b02dd91d8c5b9dbe2eb9f6b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21mb/google/hatch/var/kindred: Implement variant_devtree_update()David Wu
This change provides an implementation of variant_devtree_update() for kindred that disable eMMC controller when SKU ID = 1 or 3 BUG=b:132918661 TEST=Verify eMMC is disabled when SKU ID = 1 or 3 Change-Id: I8ccb4dae54f223881e0ced9e034bf45b994cc6f2 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-21mb/google/hatch: expose get_board_sku() as globalDavid Wu
BUG=None TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I217e13acd337034554ff055e8bf5011558d1f8bf Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21mb/google/hatch: Add support for variant_devtree_update()David Wu
This change adds support for variant_devtree_update() that allows variant to update device tree. BUG=None TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I0e9ad360b6c02c83fe49387ce7bc66d56448ffb9 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21mb/google/eve: Enable wake from MKBP events in S3Aseda Aboagye
We would like to wake eve up in suspend from an MKBP event. This commit simply enables MKBP events to wake the system in suspend using the existing host event interface. There is an accompanying series of patches in the EC firmware for eve that will allow a MKBP wake mask to be configured. BUG=chromium:786721 BRANCH=firmware-eve-9584.B TEST=Build and flash eve, generate MKBP events on the EC and verify that the system wakes up in suspend. Change-Id: I75b05c83a4204d55df11589299a7488d04bbd073 Signed-off-by: Aseda Aboagye <aaboagye@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34454 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-20mb/,sb/intel/i82801gx: Merge `ide_legacy_combined` into `sata_mode`Nico Huber
Functional changes were already done in 5eb81bed2e (sb/intel/i82801gx: Detect if the southbridge supports AHCI) but we forgot to update the `chip.h` and devicetrees. Change-Id: I0e25f54ead8f5bbc6041d31347038e800787b624 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19mb/getac/p470: Null-terminate ec_id string bufferJacob Garber
The EC ID of the ECDT needs to be null-terminated (see ACPI specification, section 5.2.15), which currently isn't being done due to an off-by-one error. strncpy() is bug-prone exactly because of issues like this, so just skip it entirely and use memcpy() instead. Change-Id: I0b62e1f32177c9768fa978053ab26bca93d7248d Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402104 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-19mb/google/octopus: Disable unused USB devicesKarthikeyan Ramasubramanian
Disable unused USB devices in the device tree so that the concerned ACPI objects do not get exported to the OS. BUG=b:133513961 BRANCH=octopus TEST=Boot to ChromeOS. Ensure that the USB devices are disabled based on port status and the concerned ACPI objects are not exported. Change-Id: I0faccdfb8a9df9ec52130437433b15973e3d6f1a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-19mb/google/octopus: Add ACPI configuration for USB devicesKarthikeyan Ramasubramanian
Add devicetree configuration for USB devices so that USB Port Capabilities (_UPC) and Physical Location of Device (_PLD) ACPI objects can be exported to the OS. BUG=b:133513961 BRANCH=octopus TEST=Boot to ChromeOS. Ensure that the _UPC & _PLD ACPI objects are exported for the configured USB devices in the SSDT table. Change-Id: I832ffe305d256296b7447035c5e5dcafb7c296d9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-19google/nocturne: Add MKBP events as a wake sourceAseda Aboagye
We would like to wake nocturne up in suspend from an MKBP event. On Nocturne, MKBP events are notified to the host via a GPIO from the EC, EC_INT_L. However, the AP cannot wake from suspend from this GPIO. Therefore, we'll use the host event interface to wake the system instead. This commit simply enables MKBP events to wake the system in suspend. BUG=chromium:786721 BRANCH=firmware-nocturne-10984.B TEST=Build and flash nocturne, generate MKBP events on the EC and verify that the system wakes up in suspend. Change-Id: I6aff4d38051c939257533229fd0085e42c01d02f Signed-off-by: Aseda Aboagye <aaboagye@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2019-07-19sb/intel/{bd82x6x|ibexpeak}: Drop p_cnt_throttling_supportedPatrick Rudolph
The processor P_BLK doesn't support throttling. This behaviour could be emulated with SMM, but instead just update the FADT to indicate no support for legacy I/O based throttling using P_CNT. We have _PTC defined in SSDT, which should be used in favour of P_CNT by ACPI aware OS, so this change has no effect on modern OS. Drop all occurences of p_cnt_throttling_supported and update autoport to not generate it any more. Change-Id: Iaf82518d5114d6de7cef01dca2d3087eea8ff927 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-19mb/google/hatch: Fix SD card is detected as read only issueSubrata Banik
This patch configures GPIO pin GPP_G7 as NF1 with internal pull down. As per schematics SD host controller SD_WP pin is not connected to uSD card connector. Configured gpio pin as NF1 with internal pull down in order to overcome gpio default state in hatch which makes SoC SD_WP pin is enable. BUG=b:137729527 BRANCH=None TEST=Able to write/read data to/from sd card after mounting card device. Change-Id: I0187267670e1dea3e1d5e83d0b29967714d6065e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34396 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19mb/google/helios: Add ALC1011 in device tree to enable speaker ampsSathya Prakash M R
Following changes are done to enable ALC1011 codec on Helios 1. ACL1011 4 devices to I2C4 2. GPIO H13 is set to GPO as per schematics Verified SSDT table and i2cdetect from kernel. Signed-off-by: Naveen Manohar <naveen.m@intel.com> Change-Id: I0d71e3bd2d4493d059a33023c1afe1b630181d4f Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-18soc/intel: Fix invalid use of 'static'Kyösti Mälkki
Just keep the variables on the stack. Change-Id: I36b29d8fb7dac159b29609033cba450bea9adf77 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-18soc/intel: Use config_of_path(SA_DEVFN_ROOT)Kyösti Mälkki
We do not want to disguise somewhat complex function calls as simple macros. Change-Id: I53324603c9ece1334c6e09d51338084166f7a585 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34299 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18mb/google/hatch/var/helios: Implement variant_memory_sku()Furquan Shaikh
This change provides an implementation of variant_memory_sku() for helios that overrides memory ID 3 and 4 to 0 and 1 to workaround the incorrect memory straps in hardware for board id 0 and unknown. BUG=b:133455595 Change-Id: I38fab1f91decac5d0a146e5a6c74e88f677af305 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-18mb/google/hatch: Add support for variant_memory_sku()Furquan Shaikh
This change adds support for variant_memory_sku() that allows variant to return memory SKU ID. Current implementation of memory_sku() is renamed to weak implementation of variant_memory_sku(). Functionally this change should be the same as before for all hatch variants. This function will be overriden by helios in a follow-up CL. BUG=b:133455595 Change-Id: I509c263ec08e0060c12ef1ea9fed673f1e3f3a41 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-18mb/*/*/gpio: Use static for const structuresPeter Lemenkov
Autoport generates these structures as static so let's make it consistent. See also commit 128205fd with Change-Id I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 ("autoport/bd82x6x.go: Improve gpio.c generation"). Change-Id: I4e07bd755ca4a65b76c69625d235a879fe7b43cb Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33524 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18mb/google/hatch: Add FP MCU to kohaku device treeShelley Chen
BUG=b:137654283 BRANCH=None TEST=Make sure can see FP MCU spidev in dmesg on bootup Change-Id: Iffa13f29e1abdf430e8dc4a0ee1a931a9e69168c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34371 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18mb/esd/atom15/gpio.c: fix whitespaceAngel Pons
Tabs, tabs, tabs... Change-Id: I65c0918957a571aaa6f49d884625af337fb2ad7c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-07-18mb/siemens/{mc_apl1,...,mc_apl5}: Fix GPIO settingsMario Scheithauer
Correct all GPIOs with reference to the Apollo Lake SoC EDS Vol 4 revision 2.4 chapter 10.1.2.3 List of Pins that are GPIOs but cannot be used in Function 0 (GPIO) mode. In additional, set an internal pull to any GPI that does not have an external resistor so that the input is not in an undefined state. Change-Id: Ia8fe457eddbed0f4ee6bff9ef9dd7a92545be40b Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
2019-07-18mb/siemens/mc_apl1: Disable all UHS-I SD-Card speed modesMario Scheithauer
The limitation for SD-Card was originally only made for mc_apl2 mainboard. Since other mc_apl mainboards also use the SD-Card interface, the speed mode setting is made in the parent mainboard_final. In additional, all UHS-I bus speed modes are disabled because of a limitation for industry use cases. This means that only HS mode is permitted. Change-Id: I2f1b51f13a53c2507c52d6a169d6384b8570b3bc Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-18mb/google/hatch: Disable wireless chargingSubrata Banik
This patch makes VGPIO_3 GPIO PIN output and low independent of cnvi is connected or not. BUG=b:123062346 BRANCH=None TEST=boot up Hatch device and make sure VGPIO_3 gpio pin is driven low. Change-Id: I629b99676f56747de1b244724709e14069250097 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34376 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-17lib: Remove the BOOTBLOCK_CUSTOM compile guardAsami Doi
This CL allows that everyone can use main() in lib/bootblock.c even if you select CONFIG_BOOTBLOCK_CUSTOM. I also rename main functions used in some soc/ to avoid the collision with the main function defined at lib/bootblock.c. Change-Id: I0575c9d1ce9dea9facfcc86760dff4deee9c1e29 Signed-off-by: Asami Doi <d0iasm.pub@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34250 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-17mainboard/portwell/m107: Do initial mainboard commitFrans Hendriks
Initial support for Portwell PQ7-M107 (Q7) module. Code based on Intel Strago mainboard. BUG=N/A TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107 Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-16mb/google/hatch: Disable Bluetooth in bootblock and enable in ramstageShelley Chen
Currently, bluetooth FW is not loaded after a reboot. In order to do this, we have to disable the bluetooth disable gpio (GPP_C14) in bootblock and re-enable it in ramstage. BUG=b:137307516 BRANCH=None TEST=boot up Hatch device and make sure (in dmesg) that proper bluetooth FW in loaded Change-Id: Ic5e447d9de57790f7a100e9e03f36b047c19d8f9 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34354 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-16mb/google/octopus/variants/garg: support LTE power sequenceMarco Chen
GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:137033609 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Change-Id: I7bf6fee087c885c22363b44aa98aa61f91be90b4 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-16mb/google/octopus: add variant_smi_sleepMarco Chen
Allow variants to customize their own smi sleep flow. BUG=b:137033609 BRANCH=octopus TEST=built Change-Id: I75db544d333a640848da9072878687c802c1c1a4 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34340 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-16mb/google/octopus: add variant_early_override_gpio_tableMarco Chen
Allow variants to override GPIO configurations of baseboard in the bootblock stage. BUG=b:137033609 BRANCH=octopus TEST=built Change-Id: I18d380cdf58f0f24e1bb1bff394ed8a91188a22c Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-16mediatek/mt8183: add a new configuration for KodamaPeichao Wang
These configuration files can be used to build Kodama firmware. BUG=b:135490566 TEST=check variant: kodama via make menuconfig; make -j Change-Id: I72e80e800ba041df1dda2b0f84470d1ef58bc946 Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33616 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-15mb/google/sarien/variants/arcada: Set data hold time for touchpadCasper Chang
Elan's touchpad requires min 0.3us data hold time. To fine tune the data hold time of i2c1 to meet specification of Elan's touchpad. BUG=None BRANCH=None TEST=Verified data hold time of i2c1 is around 320ns Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I0fa9db3b50e74f193261be96bd9e305bb19841e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Crews <ncrews@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-07-13mb/up/squared: Enable VtdFelix Singer
Change-Id: Ie935f98f84772a53de92f0dd2d13a381f5dbaf89 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-07-13mb/google/hatch: Fix trackpad configuration in overridetreeFurquan Shaikh
Hatch and variants use GPP_A21 for trackpad IRQ and wake. Fix overridetree.cb to advertise the right IRQ. Change-Id: Ib87c858b89e8726c3bc80f83be0729ef4625268e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34248 Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-13mb/google/octopus: Add custom SAR values for BluebirdSeunghwan Kim
Bluebird needs to use different SAR values than Casta. Bluebird sku id is 2. CQ-DEPEND=CL:*1435310 BUG=b:129725065 BRANCH=octopus TEST=build Change-Id: I107a8519832fcf906b94f958a3dc508d19bb4727 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34080 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-13intel/i945: Fix udelay() prototypesKyösti Mälkki
Change-Id: Ia157c6417bdd9c4ffbdf07683c51d0680e9356c9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-13intel/haswell: Replace monotonic timerKyösti Mälkki
Remove implementation of 24 MHz clock, available only on Haswell ULT SKUs. Use TSC_MONOTONIC_TIMER instead for all boards. Change-Id: Ic4aeb084d1b0913368f5eaa46e1bd68411435517 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-12mb/siemens/mc_apl3: Enable LPSS UART 1Mario Scheithauer
By setting the GPIOs 42 and 43 to native function 1 the LPSS UART 1 is activated. Change-Id: I74abd1b6fb5459cf11a5bdee182c99462f613b7a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-12device/pci: Replace use of dev_find_slot() for IRQsKyösti Mälkki
Change-Id: I48c0de73338430282ce1a4442bbeb7c867dc174c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-11mb/google/hatch: Update AC/DC loadline valuesRizwan Qureshi
Update the AC/DC loadline values for all domains. Using the same values as in arcada. BUG=None BRANCH=None TEST=Build and Boot hatch EVT Change-Id: If8ea48794d11dc68e40e6504c0d46a2b273a8ab6 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-11mb/asus/p8h61-m_pro: Add comment about PCH GPIO46Angel Pons
GPIO46 is wired to a tiny switch on the board labelled "GPU Boost". Since coreboot could make use of it, add a comment about it on gpio.c. Change-Id: I0efa85e6d8235711521b10e56b7c89a25c4b2b7f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-11mb/siemens/{baseboard,mc_apl3,mc_apl4,mc_apl5}: Fix GPIO_168Mario Scheithauer
This GPIO is corrected with reference to the Apollo Lake SoC EDS Vol 4 revision 2.4 chapter 10.1.2.3 List of Pins that are GPIOs but cannot be used in Function 0 (GPIO) mode. Change-Id: I98628ade3a1e19730ca6e6b4a63c28e6816176ce Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-11mb/siemens/{mc_apl1,...,mc_apl5}: Reduce eMMC bus speed modeMario Scheithauer
We need to reduce the eMMC bus speed for these Apollo Lake mainboards because of a limitation on Intel side for industry use cases. Change-Id: Ide6a1a302001c0752d149bfdab175a27c8f8cc35 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-11google/kukui: Adjust LCM ID voltagesYu-Ping Wu
Currently some of the LCM ID voltage gaps are below 100mV. For example, the voltage difference between ID 2 and 3 is 503-440=63mV. To reduce the risk of misrecognition from the hardware level, the voltages are adjusted so that all the voltage gaps are larger than 100mV. The RD2 resistor values are also updated. BUG=b:136987483 TEST=emerge-kukui coreboot Change-Id: Ib5c1f927fb54d8c9579f030e42eeec5a27daaceb Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34192 Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11board/kukui: Remove ADC tolerance from boardidHung-Te Lin
The tolerance of ADC is +-10mV, but the resistors may also introduce 1% variation, and causing the final measured voltage to vary around 5%. By the advisory from hardware team, checking the tolerance seems not really solving or helping anything so we should just ignore that and try to find best matched ID (this also aligns to what Gru did). BUG=b:136990271 TEST=Booted on Krane and no longer seeing ADC out of range BRANCH=None Change-Id: Ie02ca5aaafbcfa8f411d973ad0266eee385d6878 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34161 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: You-Cheng Syu <youcheng@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11mb/google/hatch/variants: Fix nonworking touch padFrank_Chu
Correct ELAN Touch pad IRQ GPIO to GPP_A21 BUG=b:135507215 BRANCH=none TEST=emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I60816a4652fa39ab2a91034b268efe8f84a13e17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33954 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11mb/google/hatch: Enable/disable GPIO clock gatingTim Wawrzynczak
Before the system enters S0ix or S3, each GPIO community will have its dynamic clock gating turned on. Upon return to S0, the dynamic clock gating will be turned back off. BUG=b:130764684 BRANCH=none TEST=Used dut-power to verify that the clock gating is enabled in S0ix and S3. Also used Store(..., Debug) statements in the ASL code to verify it was getting called. Change-Id: I20ff2aac035eaa5912af6c946d837567a4918bbf Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-11mb/google/hatch: Enable LPIT inclusion in DSDTTim Wawrzynczak
Include the lpit.asl file in Hatch's DSDT definition. BUG=b:130764684 BRANCH=none TEST=S3 suspend/resume and S0ix entry/exit work correctly. Ran > 200 iterations of suspend_stress_test and no issues found. Change-Id: If8ebff3db091257e8452869636c0e024f3123e8b Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-11mb/google/hatch: Disable GPIO community dynamic clock gatingTim Wawrzynczak
The dynamic clock gating is causing boards to miss interrupts whose pulses are shorter than 4us. Disable it using FSP UPDs. BUG=b:130764684 BRANCH=none TEST=Compiles Change-Id: I8f1ec8f7c31192bce2a761ec99b86638435dc27c Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-11mb/intel/coffeelake_rvp: Add cpu count for CFL S62Lean Sheng Tan
Increases CPU max core count to 16 for coffeelake Refresh-S Platform. TEST: boot to linux OS on CFL-S refresh Intel RVP and verified the output of cat /proc/cpuinfo shows no of processor=16. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I579ff6ae8227844741406c503d3994408ec2b617 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34156 Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11mb/google/hatch: Fix interrupt trigger type for GPP_H0(HP_INT_L)Furquan Shaikh
HP_INT_L(GPP_H0) is configured for GPIO IRQ instead of APIC IRQ since it needs to trigger on both edges. With GPIO IRQ, it is necessary to configure the trigger type in coreboot to match the ACPI configuration. This is because: 1. ACPI configuration is used by intel-pinctrl driver in Linux kernel to re-configure the trigger type for the pad in GPIO DW0 config register. This is done when kernel driver probes and requests irq for its device. 2. On resume from S3, the pad configuration gets reset and coreboot sets the trigger type to LEVEL. However, kernel driver does not probe again. This results in the trigger type being configured incorrectly. This change updates the GPIO configuration for GPP_H0 to set the same trigger type as advertised in ACPI for the kernel. BUG=b:132672011 TEST=Verified that S3 works fine. Verified that interrupt on GPP_H0 works fine on boot as well as after suspend/resume. Change-Id: Ieb44c7403a2f4911b4a8f422053dee8bcfb91d85 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34181 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-10mb/google/octopus: Remove LPDDR4 RAMID index 5,6 CH[1] only SKUKevin Chiu
From Intel EDS: Table 3-5. LPDDR4 Configurations CH00 CH01 CH10 CH11 "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "Unpopulated" "Unpopulated" CH[1](CH10/CH11) can't use alone without CH[0] BUG=b:135498646,b:136694293 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I03af74301aad3e688c97992b37c59b20a4fff58a Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34069 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 23:05:17 +0000