summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2022-11-23Revert "mb/google/brya/var/kano: select SOC_INTEL_RAPTORLAKE"Nick Vaccaro
This reverts commit 7203aa5c2dcb90e50356305cabbe062bd4f4dc76. BUG=b:260138434 TEST=None Cq-Depend: chrome-internal:5126951, chromium:4049177 Change-Id: Ieaa44a33a7c65d384581b5145821b449783ca3fa Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-11-23mb/google/skyrim/var/winterhold: Add Vrm setting for SMTEricKY Cheng
All parameters of DPTC_INPUT() need to be configured on devicetree when SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enabled. The parameters without configurations on devicetree would be 0 when SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enable. Follow AMD DevHub document #57316. Configure vrm_current_limit_mA, vrm_maximum_current_limit_mA and vrm_soc_current_limit_mA on devicetree with thermal table config E as default table for SMT. Since the dynamic thermal table switching mechanism is still under cooking, after discussing with thermal team, suggest adopting config E(limit Soc not reach to max power) as default thermal config to avoidany thermal-related issue during phase build. Once the dynamic thermal table switching mechanism is finished, will change the default value to config A. BUG=b:258572474, b:248976976, b:259167917, b:257394883 TEST=emerge-skyrim coreboot Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Change-Id: Ic1e7a46cac4119c7237d96a7bd0d23c8db028680 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2022-11-22mb/google/skyrim: Pass Ti50 IRQ to PSPMark Hasemeyer
It shouldn't be assumed that all variants of skyrim will use the same gpio for TPM interrupts. Use the PSP's new mailbox command to tell it what gpio the tpm interrupt comes in on. BUG=b:248193764 TEST=tast run <ip> hwsec.TPMContest Verify log entry:[DEBUG] PSP: Setting TPM GPIO to 18...OK Use incorrect GPIO in mailbox cmd and verify TPMContest test failed. Signed-off-by: Mark Hasemeyer <markhas@google.com> Change-Id: I9f4005e10987caf9f32e5ac99ff5f2b9467e586c Reviewed-on: https://review.coreboot.org/c/coreboot/+/69874 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-22mb/google/nissa/var/nivviks,yaviks: Remove ISH firmware-nameReka Norman
For nissa, the ISH main firmware will be included in the CSE region in flash instead of loading it from rootfs. So remove the ISH firmware-name. BUG=b:234776154 TEST=Boot to OS on nirwen and yaviks UFS SKUs. Check ISH firmware is not loaded by kernel, and device still goes to S0i3. Cq-Depend: chrome-internal:5102230 Change-Id: I68f963e17bc0dbf9db9adaaa3f96f06b8737523b Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69868 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-11-22mb/google/nissa/var/craask: Disable SAR Proximity Sensor GPIO pinTyler Wang
BUG=b:253387689 Test:Boot to OS on craask and check SAR Proximity Sensor GPIO pin Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I2b2a2516890b68036e96d1a542e6a10a098cb6a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69790 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-22drivers/ocp/dmi: move smbios_ec_revision to ocp folderJonathan Zhang
Move smbios_ec_revision to ocp folder so that all ocp boards share the same function without implementing again. TESTED=Execute "dmidecode -t 0" to check corresponding field. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Signed-off-by: Jonzhang Zhang <jonzhang@meta.com> Change-Id: I898662b78d3dbab1861cee6f1b6e148297a5d11b Reviewed-on: https://review.coreboot.org/c/coreboot/+/68785 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-21mb/google/brya/var/marasov: update field STORAGE of fw_configFrank Chu
field STORAGE 30 31 option STORAGE_UNKNOWN 0 option STORAGE_NVME 1 option STORAGE_UFS 2 end BUG=b:254365935 TEST=emerge-brya coreboot. Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I17f8a852808d279a1f2b08b364cd4e525a807560 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69786 Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-11-20mainboard/msi/ms7d25: Configure NCT6687D pin for PECIMichał Żygowski
One register configuring multi-pin functions was outside of the Global Configuration Registers space and skipped in the initial port patches. Replicate the vendor configuration and set the Super I/O pin for PECI functionality. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I90f142a1a9ee27dd061fc71b791bd4c7df97da6b Reviewed-on: https://review.coreboot.org/c/coreboot/+/68711 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-19mb/google/rex: Enable TCSS DisplayPort detection at prebootzhaojohn
This change enables the DisplayPort detection at preboot for Rex board. BUG=b:247670186 TEST=Built image and validated DisplayPort feature at preboot on Rex. Change-Id: I1a8a13e937c7132696aa39d85c3c6b6fb2dd13a5 Signed-off-by: zhaojohn <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67742 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-19ec/google/chromeec: Remove EC_HOST_EVENT_USB_CHARGERCaveh Jalali
EC_HOST_EVENT_USB_CHARGER is no longer defined by the EC, so remove all references. BUG=b:216485035,b:258126464 BRANCH=none TEST=none Change-Id: I9e3e0e9b45385766343489ae2d8fc43fb0954923 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-19mb/google/nissa/var/craask: Disable gpio export in crs for G2 touchscreenTyler Wang
BUG=b:235919755 Test=Check error message "Exposing GPIOs in Power Resource and _CRS" not show in firmware log. Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I21a47adde48555098d041b94d483cad308bdb717 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-11-18mb/google/rex: Disable `ACPI PM timer`Subrata Banik
This patch deselects `USE_PM_ACPI_TIMER` kconfig to ensure that ACPI PM timer remains disabled. The PM timer (by PMC IP) consumes more power and blocks S0ix so the timer is emulated by ucode to save power and unblock S0ix. TEST=Able to boot Google, Rex and ensure PMC MMIO register 0x18fc BIT 1 is set. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I2a23b417ff7fb6328323380a7df46b4b397fc8eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/69685 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-18mb/google/skyrim: Enable STB Spill-to-DRAM by defaultMartin Roth
BUG=b:231291430 TEST=See STB Spill-to-DRAM enabled Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ib60b7fc2ba85c7a8025c9f8c6495e94049499f56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69707 Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-18mb/siemens/mc_ehl2/devicetree.cb: Use RV3028 bus_speed instead of dummy i2c ↵Jan Samek
device Instead of creating a dummy I2C device in order to force Linux to decrease the I2C bus speed, use the own 'bus_speed' field of RV3028 device config structure. Linux should always set the bus speed to the speed of the slowest device sitting on the bus. Hence the dummy device is not needed here anymore. BUG=none TEST=See if the RV3028 RTC is visible and working (date/time can be set/read) in Linux. At the time, a driver modification is needed to add a match table for the "MCRY3028" ACPI HID. A proper kernel patch is pending. Change-Id: I6e269dc67d1fe2a6747fcf3bee224def7b553f08 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69544 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2022-11-18cbmem_top_chipset: Change the return value to uintptr_tElyes Haouas
Get rid of a lot of casts. Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2022-11-18mb/google/herobrine: Implement mainboard_needs_pcie_initShelley Chen
Implement mainboard_needs_pcie_init() for herobrine in order to determine if we need to initialize the pcie links. When the SKU id is unknown or unprovisioned (for example at the beginning of the factory flow), we should still initialize PCIe. Otherwise the devices with NVMe will fail to boot. BUG=b:254281839 BRANCH=None TEST=emerge-herobrine coreboot Change-Id: I8972424f0c5d082165c185ab52a638e8b134064c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-11-18mb/google/nissa: Modify FMD to redistribute bufferKrishna P Bhat D
Modify the chromeos FMD file for nissa variants to redistribute the buffer in SI_ME region obtained due to CSE size optimizations to SI_BIOS region. 1. Modify SI_ALL region size to 3712K. SI_DESC remains at 4K and SI_ME is 3708K. 2. Modify SI_BIOS region to 12672K. This results in an addition of 32K buffer each to FW_MAIN_A/B regions. BUG=b:228936671 BRANCH=firmware-nissa-15217.B TEST=Verify CSE FW update with new FMD and ME RW blobs on craask. Cq-Depend: chrome-internal:5094491 Change-Id: I5ead2f81850a2aa79e677c7f271db672e235750a Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-18mb/google/brya/variants/crota: Configure TDC current for VR domains.Johnny Li
+-----------+-------+-------+---------+-------------+----------+ | Setting | AC LL | DC LL | ICC MAX | TDC Current | TDC Time | | |(mOhms)|(mOhms)| (A) | (A) | (msec) | +-----------+-------+-------+---------+-------------+----------+ | IA | 2.8 | 2.8 | 80 | 43 | 28000 | +-----------+-------+-------+---------+-------------+----------+ | GT | 3.2 | 3.2 | 40 | 23 | 28000 | +-----------+-------+-------+---------+-------------+----------+ - IA TDC current from 20A to 43A. - GT TDC current from 20A to 23A. BUG=b:256754175 TEST=Build test image and use PTAT to check IA and GT value Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com> Change-Id: Ife36655f077bae567bff3c3e33f779c990cf5ed9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69135 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-11-18Makefile.inc: Remove workaround ACPI warningsArthur Heymans
No boards now have a missing dependency so remove the workaround. Change-Id: I787f6aa588175ba620a068918c42edc9d257c3ef Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69514 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-17mb/prodrive/atlas: add unique DIMM locators in smbios type17David Milosevic
This patch adds unique device-locators, bank-locators and asset-tags to the smbios type17 tables by making use of a DIMMs controller-ID. This way we avoid name clashes when, for example, two DIMMs share the same channel-ID and DIMM-ID but have a distinct controller-ID. Signed-off-by: David Milosevic <David.Milosevic@9elements.com> Change-Id: I8aef79faa43f2475485f581c675ee152e580f678 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-11-17mb/google/skyrim/var/winterhold: Update touchscreen devicetree settingEricKY Cheng
Update touchscreen setting. Change hid as panel team request to fix touchscreen with no function. The panel team verification result is on b/251378772 comment#17. BUG=b:251378772 TEST=Build/boot ChromeOS on winterhold, ensure touchscreen is functional. Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Change-Id: I07d446111b1c18bfe15d00b6eacff23382cd461a Reviewed-on: https://review.coreboot.org/c/coreboot/+/69674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-11-17mb/google/rex: Add `disable_gpio_export_in_crs` for rexSubrata Banik
None of the touchscreens (over I2C) used in the rex program requires exporting GPIOs in the ACPI _CRS method. This can cause i2c devices to malfunction or cause timing sequence violations if ACPI exports a PowerResource for the device that uses GPIOs that are also exported in _CRS. BUG=none TEST=Able to build and boot Google, Rex platform. Without this patch: [ERROR] I2C: 00:10: Exposing GPIOs in Power Resource and _CRS With this patch: None Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I578a60eff27f94d6dc94b900604bc7560337d60b Reviewed-on: https://review.coreboot.org/c/coreboot/+/69612 Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-17mb/google/nissa/var/pujjo: Tune timing on SD device RTD3Leo Chou
Tune timing between power on and reset on SD device RTD3. BUG=b:250746988 TEST=Use the value to boot on Pujjo successfully. Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I1ea77ec8381000249229653f1c0b9044bdf7866d Reviewed-on: https://review.coreboot.org/c/coreboot/+/69679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-11-17mb/starlabs/starbook/kbl: Drop redundant option codeAngel Pons
Commit 9bbc039c457774dbeb44ea37ecc6507144d49b61 ("soc/intel/skylake: Hook up FSP hyper-threading setting to option API") already hooks up the `hyper_threading` CMOS option in SoC code, so there's no need to do it from mainboard code. Change-Id: I602452266a8465cced12454f800ea023f382ba6f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69522 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-17mb/supermicro/x11-lga1151-series: Fix CMOS optionsAngel Pons
The `hyper_threading` CMOS option was hooked up to the wrong enumeration and lacked a default value in `cmos.default`. Thus, use the correct enum for the `hyper_threading` option, remove the now-unused "backwards" enum and provide a default value in `cmos.default`. Change-Id: I2ee9ced2881ed5e348e84a35e8abd6b7a363d936 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69491 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-17mb/emulation/qemu-q35: Split smm_close() and smm_lock()Kyösti Mälkki
Change-Id: I6d8efe783e6cc5413c3fd0583574a075a2c3876b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-17mb/emulation/qemu-q35: Release TSEG reserve with SMM_ASEGKyösti Mälkki
If TSEG is not enabled, smm_region() should not reserve the region, so add a test for T_EN flag in ESMRAMC. For the SMM_ASEG case this moves CBMEM immediately below top-of-ram. Change-Id: I2da4b846d0767afe00e98fdee375914c1875ddf5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-17Revert "mb/google/herobrine: Remove NVMe from device tree"Shelley Chen
This reverts commit d164feb72602da958b644643b44e754f04a1f281. Reason for revert: Herobrine program decided that we wanted to be able to boot from NVMe if one exists. Change-Id: I2d3217c514734608e2ff049b620f4c7acf86de89 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69720 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-17mb/google/nissa/var/xivu: Add fw_config probe for ALC5682-VS/ALC5682-VDIan Feng
ALC5682-VS/ALC5682-VD use different kernel driver by different hid name. Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config. ALC5682I-VS: _HID = "RTL5682" ALC5682-VD: _HID = "10EC5682" BUG=b:246491349 TEST=ALC5682-VD/ALC5682-VS audio codec can work. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I60d5e0af7e2dabd134c8059eaeac388d40ac2073 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-16mb/google/nissa/var/yaviks: Enable ISH driver and firmware nameWisley Chen
Enable ISH driver and set firmware name as "adl_ish_lite.bin" BUG=b:242291814 TEST=boot into kernel, and check dmesg "ISH firmware intel/adl_ish_lite.bin loaded" Change-Id: I4badabba1a0cfceb77fc91f21953496152f19615 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69606 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-16mb/google/brya/var/agah: Add Power Limits for RPL SKUTarun Tuli
Add power limits for the RPL SKUs of Agah. BUG=b:258432915 TEST=build and boot ADL based Agah. RPL based testing when hardware becomes available. Change-Id: Ie97a9d14f1ee6f65225b7d26e25ff3d902fddc7f Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69419 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-11-16mb/google/brya/variants/volmar: Update ELAN touchscreen timingRen Kuo
ELAN updated the datasheet, the HID/I2C protocol's T3 delay time is 150ms now. Modify the volmar's delay time to follow the requiremnet. BUG=b:257073343 TEST=Build firmware and measure the T3 timing of resume and boot up on volmar DUT. Run Suspend/Resume with UI test and got pass. Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I40a30ed567cd676d0a9373527d93fe51f89d39e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69559 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-11-16mb/aopen/dxplplusu: Iterate CPUs for ACPI MADTKyösti Mälkki
Change-Id: I64e5f5ee59859564c31ebb6f73b91d3d36be7d77 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-16cpu/x86/smm: Use common SMM_ASEG regionKyösti Mälkki
Change-Id: Idca56583c1c8dc41ad11d915ec3e8be781fb4e48 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-16mb/google/skyrim/var/winterhold: Update DPTC setting for SMTEricKY Cheng
Follow Dynamic Thermal Table Switching proposal to initialize thermal table config E as default table for SMT. Since the dynamic thermal table switching mechanism is still under cooking, after discussing with thermal team, suggest adopting config E(limit Soc not reach to max power) as default thermal config to avoid any thermal-related issue during phase build. Once the dynamic thermal table switching mechanism is finished, will change the default value to config A. BUG=b:232946420, b:258572474 TEST=emerge-skyrim coreboot Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Change-Id: I4aa90304e1e7bda7d580de2582129191e9eb0e76 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2022-11-16mb/google/skyrim: Create crystaldrift variantChao Gui
Create the crystaldrift variant of the skyrim reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:240970782 BRANCH=None TEST=util/abuild/abuild -p none -t google/skyrim -x -a make sure the build includes GOOGLE_CRYSTALDRIFT Signed-off-by: Chao Gui <chaogui@google.com> Change-Id: Ibb3ebaa7e4af1a03173b93b8c4fbd342f7cd7100 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-16mb/google/zork: Use detect vs probed flag for touchscreensMatt DeVillier
Now that coreboot performs the necessary power sequencing, switch from using the 'probed' flag to 'detect' for all I2C touchscreens. This alleviates ChromeOS from having to probe to see which touchscreen model is actually present, prevents breaking ACPI spec by generating device entries with status 'enabled and present' which aren't actually present, and improves compatibility with upstream Linux and Windows. BUG=b:121309055 TEST=build/boot ChromeOS and Linux on zork, ensure touchscreen is functional, and ACPI device entry generated for correct touchscreen model. This mirrors the changes made for skyrim in commit 22683fab (mb/google/skyrim: Use detect vs probed flag for touchscreens) Change-Id: Idfe899bd535507c56f0825c6538246441b3b0827 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69457 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-16mb/google/zork: Implement touchscreen power sequencingMatt DeVillier
As all variants have a touchscreen option, in baseboard tables set the enable GPIO high and hold in reset during romstage, then release reset in ramstage. This will allow the touchscreen to make use of the runtime I2C detect feature (enabled in a subsequent commit) so that an ACPI device entry is created only for the touchscreen actually present. This mirrors the change to skyrim in commit f90ff456 (mb/google/skyrim: Implement touchscreen power sequencing) Change-Id: Ifdd75cd96e7b6880085a3f47214b92948a56aa2e Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69456 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-16mb/google/nissa/var/craask: Correct G2 touchscreen HIDTyler Wang
Correct G2 touchscreen HID to GT75CH02. BUG=b:235919755 Test=Dump the SSDT on craask and check the HID had been modified. Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Iad32e8cbd534dc43fca24d881092f3477ca1a4e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69600 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-16mg/google/zork: Add functionality to set GPIOs in romstageMatt DeVillier
Add (empty) baseboard GPIO tables, getter functions, and call to gpio_configure_pads() in romstage, in preparation for adding touchscreen GPIO configuration/power sequencing. Change-Id: If0f626dbc7e601c2f49759e49a0baf027bf25f96 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69482 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-16mb/google/kahlee: Implement touchscreen power sequencingMatt DeVillier
As all variants have a touchscreen option, in baseboard table set the enable GPIO high and hold in reset during romstage, then release reset in ramstage. This will allow the touchscreen to make use of the runtime I2C detect feature (enabled in a subsequent commit) so that an ACPI device entry is created only for the touchscreen actually present. This mirrors similar changes made for skyrim, guybrush, and zork. TEST=tested with rest of patch train Change-Id: Id235815904dfc093549a1ed529e19974010977c7 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69547 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-16mb/google/kahlee: Use detect vs probed flag for touchscreensMatt DeVillier
Now that coreboot performs the necessary power sequencing, switch from using the 'probed' flag to 'detect' for all I2C touchscreens. This alleviates ChromeOS from having to probe to see which touchscreen model is actually present, prevents breaking ACPI spec by generating device entries with status 'enabled and present' which aren't actually present, and improves compatibility with upstream Linux and Windows. BUG=b:121309055 TEST=build/boot ChromeOS and Linux on barla/liara, ensure touchscreen is functional, and ACPI device entry generated for correct touchscreen model. Change-Id: I142a6cdb6e8cef51fd925d34362a19a8736982a5 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69548 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-16mb/google/kahlee: rename baseboard GPIO table getter for clarityMatt DeVillier
Rename variant_romstage_gpio_table() to baseboard_romstage_gpio_table() since the GPIO table comes from the baseboard (and is not overridden by any variant). Drop the __weak qualifier as this function is not overridden. This mirrors similar changes made for skyrim, guybrush, and zork. Change-Id: I772bd2d74fd6778ffaa1e0809cc53f8d43b153f3 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69546 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-16mb/google/kahlee: Disable touchscreen GPIO export in CRSMatt DeVillier
Disable GPIO export in ACPI _CRS for touchscreens which set the register "have_power_resource." This eliminates the error: [ERROR] I2C: <bus:addr>: Exposing GPIOs in Power Resource and _CRS TEST=build/boot barla/liara, verify touchscreen functional, no error in cbmem log. Change-Id: Ifa8248755f346df37faf7a3182651bf190b0c33d Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69549 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-16mb/google/brya/var/agah: Set GPP_H13 to reset on PLTRSTTarun Tuli
GPP_H13 should be reset when going to S5. Update it to do so on PLTRST BUG=b:240617195 TEST=Measured on Agah that PP3300_SD_X goes off in S5. Change-Id: I959f92f2c486e0ca5cb4269b271c163b4c4925d4 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69340 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-16mb/google/brya/var/gaelin: Configure DRIVER_TPM_I2C_BUSRaymond Chung
Add TPM I2C bus for gaelin in Kconfig. BUG=b:249000573 BRANCH=firmware-brya-14505.B TEST=Build "emerge-brask coreboot" and can boot to OS. Change-Id: Idaac11111a9ba7df0929267567e4730b2811f5f0 Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68886 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2022-11-15mb/emulation/qemu-q35: Use ioapic helper functionsKyösti Mälkki
Change-Id: I1b7f4935b6901525b2f3b2a8405c5678aaee7515 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69525 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-15mb/emulation/qemu-q35: Cleanup includesKyösti Mälkki
Change-Id: Ib36d855e1dce8eb800bc077c1e444768c444fef8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69524 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-15mb/google/nissa: Add SD_BOOT fw_configReka Norman
Some nissa devices want to disable boot from SD card. Since nissa has a single shared depthcharge target, add a program-wide fw_config to allow disabling it. BUG=b:253003881 TEST=With depthcharge change, set SD_BOOT_DISABLE on nivviks and check SD card is not initialised in depthcharge. Change-Id: I1a3a533e4e74e48d9ce4a9678b812cb62ce2066b Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69541 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-15mb/google/nissa: Remove SI_ME subregionsReka Norman
The SI_ME subregions were added to support using the CSE stitching tools (cse_serger). Use of the stitching tools has been reverted and probably won't be re-enabled soon, so the subregions are not currently used by anything. They also don't match the actual region sizes chosen by the FIT tool, so remove them to avoid confusion. The other option would be to manually keep them in sync with the sizes chosen by the FIT tool, but this would be extra manual effort without much benefit. BUG=None TEST=Build and boot on nivviks Change-Id: I993e07a060445ab8de1b0e40a023e8248867c53c Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69540 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2022-11-15soc/amd: commonize generation of the PIC/APIC mapping tablesFelix Held
Now that we have a common init_tables in all mainboards using AMD SoCs, both the population of the fch_pic_routing and fch_apic_routing arrays and the definition of those arrays can be moved to the common AMD SoC code to not have the code duplicated in all mainboards. BUG=b:182782749 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Change-Id: I8c65eca258272f0ef7dec3ece6236f5d00954c66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68853 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-15mb/google/geralt: Enable RTC for eventlog timestampsLiju-Clr Chen
Without RTC, the timestamps in the eventlog are currently all '2000-00-00 00:00:00'. Enable RTC to get the correct timestamps. localhost ~ # head /var/log/eventlog.txt 0 | 2022-10-15 22:59:38 | Log area cleared | 4088 1 | 2022-10-15 22:59:38 | Memory Cache Update | Normal | Success 2 | 2022-10-15 22:59:45 | System boot | 0 3 | 2022-10-15 22:59:46 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown localhost ~ # localhost ~ # date Sun Oct 16 01:42:59 PDT 2022 localhost ~ # BUG=b:233720142 TEST=check the timestamp field in /var/log/eventlog.txt Change-Id: Iddad102dc8d60de01a691d330deb8247e99c616a Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69432 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-15mb/google/brya/var/marasov: Add memory config for marasovFrank Chu
Configure the rcomp, dqs and dq tables based on the schematic. BUG=b:254365935 BRANCH=None TEST=Built successfully Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I8c9541006828deae83e2ae4a860f40d7433662d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69149 Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-11-15mb/clevo/cml-u: Fix CMOS optionsAngel Pons
The `hyper_threading` CMOS option was hooked up to the wrong enumeration and lacked a default value in `cmos.default`. Thus, use the correct enum for the `hyper_threading` option, remove the now-unused "backwards" enum and provide a default value in `cmos.default`. Change-Id: I56b0320f9210cde8ff58db176d2b7d2207c98aa9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69521 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-15mb/amd/gardenia,pademelon: rewrite IRQ mapping handlingFelix Held
Gardenia and Pademelon had the same mainboard_picr_data and mainboard_intr_data data arrays. Compared to Kahlee there were 4 differences for PIRQ_F, PIRQ_SCI, PIRQ_SD and PIRQ_SATA in the IRQ data arrays. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia460b467990be7c3e6261440505988a9770ea084 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68852 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-15mb/google/kahlee/mainboard: rewrite IRQ mapping handlingFelix Held
Rewrite the Kahlee IRQ mapping handling to be in line with the newer AMD SoCs to allow making the largest part of the corresponding code common for all AMD SoCs in the coreboot tree. The PIC-mode IRQ numbers for both PIRQ_ASF and PIRQ_SDIO were 0 in the data tables which is the PIT IRQ which looks very wrong to me, so it was changed to PIRQ_NC. Since the ASF and likely also the SDIO controller are unused, this shouldn't change runtime behavior. The data tables also had non 0 and non 0x1f entries in the following locations the internal BKDG #55072 revision 3.04 describes as unused: 0x31, 0x33, 0x35-0x37, 0x40, 0x50-0x53. The entry at 0x32 is also non 0 and non 0x1f and the description in the BKDG says that it controls the IRQ mapping of another internal PCI device, but that PCI device doesn't exist in the SoC. TEST=No obvious IRQ-related breakage on google/liara Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Change-Id: I9b3bfca33d88ef3989b63f4fe6c301e0e485b7e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68851 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-15mb/google/brya/var/marasov: use i2c1 for TPM for marasovFrank Chu
This change sets DRIVER_TPM_I2C_BUS to the i2c 1 bus for TPM for the marasov variant. BUG=b:254365935 TEST=FW_NAME=marasov emerge-brya coreboot Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I4d155fb35424d1ec12e825ca0aab233bd3cd607e Reviewed-on: https://review.coreboot.org/c/coreboot/+/69376 Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-15mb/google: Fix log messagesElyes Haouas
Change 'printk(BIOS_DEBUG, "ERROR:' to printk(BIOS_ERR, "'. Change-Id: Id31c25f5b8686f951ab4f331682b82ff327d5e78 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-15mb/google/nissa/var/craask: Remove RFIM settings for CraaskTyler Wang
Request by RF team, remove RFIM related settings to disable it. BUG=b:239657092 Test=RF team test on DUT and check it's disable Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I1eb4d93c2821cb067628dc1228c6c522d292c739 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-14nb/intel/ironlake: Hook up PCI domain and CPU ops to devicetreeArthur Heymans
Change-Id: I9dd254eddc12966154776d8a2d43f002567e758f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69290 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-14mb/google/nissa/var/pujjo: Modify touch screen hid to ELAN901CLeo Chou
Modify touch screen hid for Pujjo board. BUG=b:258586760 TEST=Use the value to boot on Pujjo successfully. Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: Ia3b374de8cba2125c478814a1890a4b6831715b9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-13drivers/generic/ioapic: Drop poor implementationKyösti Mälkki
This disables MP table generation for the affected boards since interrupt routing entries would now be completely missing. The mechanism itself is flawed and redundant. The mapping of integrated PCI devices' INTx pins to IOAPIC pins is dependent of configuration registers and needs not appear in the devicetree.cb files at all. The write_smp_table implementation would skip writing any entry delivering to destination IOAPIC ID 0. This does not follow MP table specification. There were duplicate calls to register_new_ioapic_gsi0(), with another present under southbridge LPC device. Change-Id: I383d55ba2bc0800423617215e0bfdfad5136e9ac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69488 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-13mb/gigabyte/ga-945gcm-s2c,skl: Drop HAVE_MP_TABLEKyösti Mälkki
The weak implementation of write_smp_table() is not useful without DRIVERS_GENERIC_IOAPIC and related entries in devicetree.cb. No interrupt routing entries are present in the generated MP table. Change-Id: I71a209e95ae1fe8c1c90b61c6ac0fb0e7bcc7eca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69490 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-13mb/asus/p5gc-mx: Drop HAVE_MP_TABLEKyösti Mälkki
The weak implementation of write_smp_table() is not useful without DRIVERS_GENERIC_IOAPIC and related entries in devicetree.cb. No interrupt routing entries are present in the generated MP table. Change-Id: Ib50a7656cef40d0d3ffcc408cc0858c1dae7b9e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-13mb/google/zork: rename baseboard GPIO table getter for clarityMatt DeVillier
Rename variant_pcie_gpio_table() to baseboard_pcie_gpio_table(), since the GPIO table comes from the baseboard (and is not overridden by any variant). Drop the __weak qualifier as this function is not overridden. This is similar to the change made for skyrim in CB:67809 Change-Id: Idd8ea3446ab7940b21265a3ed8080ba4029c4ff7 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69453 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-13mb/emulation/qemu: Move packed attributeMartin Roth
The jenkins build complains about this now that clang has been added. src/mainboard/emulation/qemu-q35/cpu.c:37:1: error: attribute '__packed__' is ignored, place it after "union" to apply attribute to type declaration [-Werror,-Wignored-attributes] __packed union save_state { Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Id8faa24239505d808d09c00d825344edc7c4b7d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-12mb/google/brya/var/agah: Add RPL Support to AgahTarun Tuli
Enable RPL support for Agah. BUG=b:258432915 TEST=build and boot ADL based Agah. RPL based testing when hardware becomes available. Change-Id: I5437dbf9e7812367a280d1ed659f286fb9b62a68 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69398 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-12mb/google/rex: Add Write Protect GPIO to cros_gpiosIvy Jian
This will enable crossystem to access WP GPIO BUG=b:258048687 TEST= wpsw_cur in crossystem reads the correct gpio Change-Id: I67f4a57025064dbf8c691255b0abae9d3fa0dbd3 Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69468 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-12mb/google/brya/variants/volmar: Disable the unused FP padsRen Kuo
Disable the unused fingerprinter(FP) gpio for zavala by fw_config FPMCU_MASK field. BUG=b:250807253 TEST=build firmware and veriify the FP function on volmar DUT Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I0af1b7c3e4829ecab98525ead4f078c3eb6485d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69465 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-12mb/google/brya/var/marasov: Enable ISH driver and firmware nameSubrata Banik
BUG=b:234776154 TEST=Build and boot Marasov UFS, copy ISH firmware to host file system /lib/firmware/intel/adl_ish_lite.bin check "dmesg |grep ish", it should show: ish-loader: ISH firmware intel/adl_ish_lite.bin loaded Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic53a3cbdf83825adc27f37877a14f4f405d4a5ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/69377 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-11-12mb/google/brya/var/marasov: Select ISH driverSubrata Banik
This patch ensures that Marasov selects the ISH driver for devices with UFS enabled. BUG=b:256566011 TEST=Able to build Marasov. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I97a0aa3bc6976be32ddbf1fc6b37c16bb62a62e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69379 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-11-12ec/google/chromeec: Deprecate dev_index from google_chromeec_rebootCaveh Jalali
This removes the dev_index argument from the google_chromeec_reboot API. It's always set to 0, so don't bother passing it. BUG=b:258126464 BRANCH=none TEST=none Change-Id: Iadc3d7c6c1e048e4b1ab8f8cec3cb8eb8db38e6a Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69373 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-12mb/emulation/qemu-q35: Fix running qemu-i386 with SMMArthur Heymans
Depending on whether qemu emulates an amd64 or i386 machine the SMM save state will differ. The smbase offsets are incompatible between those save states. TESTED: Both qemu-system-i386 and qemu-system-x86_64 (v7.0.50) have a working smihandler, ASEG and TSEG. Change-Id: Ic6994c8d6e10fd06655129dbd801f1f9d5fd639f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-12soc/intel/broadwell: Hook up PCI domain and CPU cluster ops to devicetreeArthur Heymans
Change-Id: I77a333827552741453d8b575f2a8009b3e1bf8f1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-12mb/google/brya/var/gladios: Add GL9750 SD card reader supportKevin Chiu
BUG=b:239513596 TEST=emerge-brask coreboot Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Change-Id: I7411e10348c36786000c6918b9b154b7329f3cd0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-12mb/google/brya/var/gladios: Include GL9763E driver for eMMC supportKevin Chiu
Support GL9763E as a eMMC boot disk. BUG=b:239513596 TEST=emerge-brask coreboot Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Change-Id: I2b29309615df381f1e24f29fc048c6f9bf216b7f Reviewed-on: https://review.coreboot.org/c/coreboot/+/69425 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-11mb/clevo/l140mu: make use of the new clevo/it5570e ec driverMichael Niewöhner
Hook up the new EC driver. Tested: - Fn hotkeys work (brightness, display, volume, tp toggle, ...) - Display lid - Sleep/wake - Camera (including Fn toggle) - Bluetooth (both CNVi and PCIe card) - Wi-Fi (both CNVi and PCIe card) - CMOS options Known issues: - Touchpad toggle needs OS setup; see CB:68791 - UCSI is not implemented; see CB:68791 Change-Id: I6c4637936761cd62571b5d19fe2afd65560f49a0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59850 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-11mb/clevo/l140cu: make use of the new clevo/it5570e ec driverMichael Niewöhner
Hook up the new EC driver. Tested: - Fn hotkeys work (brightness, display, volume, tp toggle, ...) - Display lid - Sleep/wake - Camera (including Fn toggle) - Bluetooth (both CNVi and PCIe card) - Wi-Fi (both CNVi and PCIe card) - CMOS options Known issues: - Touchpad toggle needs OS setup; see CB:68791 - UCSI is not implemented; see CB:68791 Change-Id: I28ac401ada2945bb58fe862895458b10fed505fe Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68795 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-11mb/clevo/l140cu: drop System76 ECMichael Niewöhner
Drop System76 EC, since the ODM board does not use it. Clevo EC FW support will be added and hooked up cleanly in the follow-up changes. Change-Id: I06abbde238be6d25842472a6a82159413ab52ef5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59816 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-11mb/google/brya/var/gladios: use i2c1 for TPM supportKevin Chiu
This change sets DRIVER_TPM_I2C_BUS to the i2c 1 bus for TPM for the gladios variant. BUG=b:239513596 TEST=emerge-brask coreboot Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Change-Id: Id6f2bf2a79df883bcb70171051cec4c577ca3bc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69424 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-11-11aopen/dxplplusu: Add early GPIO settingsKyösti Mälkki
Required for 2nd COM port to work. Change-Id: Ib211e9c4b487fadec3d3487f9d745f44d8ca4579 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-10sb,soc/intel: Use acpi_create_madt_ioapic_from_hw()Kyösti Mälkki
Change-Id: I9fd9cf230ce21674d1c24b40f310e5558e65be25 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-10soc/intel/xeon_sp: Move SMBIOS type 4 override functions from mainboardJingleHsuWiwynn
to soc Move SMBIOS type 4 override functions from mainboard to soc so that all xeon family cpus share same functions without implementing again. Tested=On OCP Deltalake, dmidecode -t 4 shows expected info. Signed-off-by: JingleHsuWiwynn <jingle_hsu@wiwynn.com> Change-Id: I17df8de67bc2f5e89ea04da36efb2480a7e73174 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-11-10mb/google/skyrim: Enable SOC_AMD_COMMON_BLOCK_I2C3_TPM_SHARED_WITH_PSPJan Dabros
Skyrim platforms have I2C3 controller which is shared between PSP and X86. In order to enable cooperation, PSP acts as an arbitrator. Enable SOC_AMD_COMMON_BLOCK_I2C3_TPM_SHARED_WITH_PSP, so that proper driver is binded on the OS side. BUG=b:241878652 BRANCH=none TEST=Build kernel and firmware. Run on skyrim and verify TPM functionality. Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: I2a3de8cb2b9241e2d81e02df49f317ac0408d5bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/67675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-11-10mb/google/herobrine: Update comment of modem status infoVenkat Thogaru
Updated comment as per guidelines. BUG=b:232302324 TEST=none Signed-off-by: Venkat Thogaru <quic_thogaru@quicinc.com> Change-Id: I6a925477a926e7e9d54e42d662768536318ec8e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-11-10mb/amd/chausie/ec.c: Enable WLANFred Reitberger
Enable WLAN power and deassert the various radio disables. TEST=boot chausie Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I2d21905001fa776c0d5c864d83dcd697e3febe0a Reviewed-on: https://review.coreboot.org/c/coreboot/+/69319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-11-10mb/amd/chausie: Correct naming of EC FWFred Reitberger
Change the EC FW CBFS filename prefix to a more accurate "ec/" TEST=build and boot chausie Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ib9ee24ca06b29c74cc0a91f9e4789df00ba1ba53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-11-10mb/google/brya/var/marasov: use RPL FSP headersFrank Chu
To support an RPL SKU on marasov, marasov must use the FSP for RPL. Select SOC_INTEL_RAPTORLAKE for marasov so that it will use the RPL FSP headers for marasov. BUG=b:254365935 BRANCH=None TEST=FW_NAME=marasov emerge-brya intel-rplfsp coreboot-private-files-baseboard-brya coreboot chromeos-bootimage Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I7874420c0fb51b9cc616cd979ffc9349c381602e Reviewed-on: https://review.coreboot.org/c/coreboot/+/69367 Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-11-10mb/google/brya/var/marasov: Generate SPD ID for supported memory partsFrank Chu
Add supported memory parts in mem_parts_used list, and generate SPD ID for these parts. DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) H9JCNNNBK3MLYR-N6E 1 (0001) MT62F1G32D4DR-031 WT:B 4 (0100) H9JCNNNCP3MLYR-N6E 5 (0101) BUG=b:254365935 BRANCH=None TEST=run part_id_gen to generate SPD id Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: Ifa0637b47d0017cdb9e26ed32328f4405c0df3f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69311 Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-11-10mb/google/brya/var/marasov: Update devicetree setting for marasovFrank Chu
update devicetree setting per the schematic BUG=b:254365935 BRANCH=None TEST=Built successfully Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: Ifa4cb18b8e1a7b162f505ff12612ef808fb7061a Reviewed-on: https://review.coreboot.org/c/coreboot/+/69364 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-10mb/google/nissa/var/craask: Disable stylus GPIO pins based on fw_configTyler Wang
BUG=b:257879909 Test:Boot to OS on craask and check stylus GPIO pins Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I7e3a2583187c8a8e2616a5272b5a7a61debe982b Reviewed-on: https://review.coreboot.org/c/coreboot/+/69138 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-10mb/google/nissa/var/craask: Modify DPTF related settingsTyler Wang
Request by thermal team, make below changes: 1) tdp_pl2_override: 12 --> 25 2) pl1.min_power: 3000 --> 5500 3) pl1.time_window_max: 32 * MSECS_PER_SEC --> 28 * MSECS_PER_SEC 4) pl2.min_power: 12000 --> 25000 5) pl2.max_power: 12000 --> 25000 6) pl2.time_window_min: 28 * MSECS_PER_SEC --> 1 7) pl2.time_window_max: 32 * MSECS_PER_SEC --> 1 BUG=b:239495499 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I88c8c4e6798ec5bc2930dd713e8c8b2c543cfaf9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68523 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
2022-11-10mb/google/nissa/var/pujjo: Update register parameters for SX9324 tunningVictor Ding
Update SX9324 related settings based on tunned values from the ODM. This patch supports both legacy and upstream Linux's SX9324 driver. BUG=b:242662878 TEST=i2cdump -y -f 13 0x28 (Verified register values on Pujjo) Signed-off-by: Victor Ding <victording@google.com> Change-Id: I34d8073ffe93e6939f8da0cd7efb8667c0e9ac37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69366 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-10mb/kontron/bsl6/romstage.c: Clean up includesElyes Haouas
Change-Id: Ie3a08799294729beec83faf819fb1f249c6461cd Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-11-09Revert "mb/aopen/dxplplusu: Remove board"Kyösti Mälkki
This reverts commit eb76a455cd39ec59b7f2ba28baeec9538befd59e and applies minor fixes to make it build again. PARALLEL_MP was working prior to board removal and no relevant SMI handlers were implemented. So NO_SMM choice is now selected. Change-Id: Ia1cd02278240d1b5d006fb2a7730d3d86390f85b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-09cpu/*: Drop PARALLEL_MP leftoversArthur Heymans
These symbols and codepaths are unused now so drop them. Change-Id: I7c46c36390f116f8f8920c06e539075e60c7118c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69361 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-09soc/amd/picasso/acpi: include pci_int_defs.asl from soc.aslFelix Held
Instead of including pci_int_defs.asl in each board's DSDT, include it in the common soc.asl. This moves the PRQM OperationRegion and the PRQI IndexField defined in pci_int_defs.asl into the \_SB scope, but those are defined inside the \_SB scope both in the Picasso reference code and for the AMD SoCs from Cezanne on. TEST=Both Linux and Windows still boot and don't show ACPI errors on Mandolin after moving this inside the \_SB scope Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib4e7bfb15de184cc43cd17c8249be0f59405793f Reviewed-on: https://review.coreboot.org/c/coreboot/+/69188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
2022-11-09soc/amd/picasso/acpi: rename pcie.asl to pci_int_defs.aslFelix Held
This aligns Picasso more with the newer AMD SoCs and also makes it a bit clearer what this file does. Also remove the unneeded tabs at the beginning of each line. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie6e5ee815e4346004bc864a6111a255dc689eae8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
2022-11-09nb/intel/haswell: Hook up PCI domain and CPU cluster ops to devicetreeArthur Heymans
Change-Id: I955274bc6bda587201f130762c0735c36f5501d1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69289 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-09mb/intel/harcuvar: Fix strict prototype warningArthur Heymans
Clang warns on both the declaration and the definction. Change-Id: I94d979fcdbe41349c59248656066615bffd215b6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 21:18:55 +0000