aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2021-11-02mb/google/volteer: allow MKBP devices and disable TBMC deviceFrankChu
Enable MKBP (Matrix Keyboard Protocol) interface for all volteer family to use for buttons and switches. Disable TBMC (Tablet Mode Switch device), as it is not needed anymore. BUG=b:171365305 TEST=manual test on Volteer: Volume Up/Down and Power buttons, Tablet Mode switch Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I2bb2e895af17fa4280113e57e2b0ca780af8840e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boris Mittelberg <bmbm@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-02mb/intel/adlrvp: Configure EC in RW GPIOAnil Kumar
EC_IN_RW signal from EC GPIO is connected to GPIO E7 of SOC. This GPIO can be used to check EC status trusted (LOW: in RO) or untrusted (HIGH: in RW). Branch=none Bug=none Test=Issue manual recovery and confirm DUT is entering recovery mode on ADL-M RVP. Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I20804db450ab0b3ebe19c51ba2b294a0137d81a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-02mb/google/guybrush: Update STT coefficientsJason Glenesk
Update guybrush STT (Skin Temperature Tracking) configuration settings to values provided by power team after tuning. BUG=b:203123658 Change-Id: I14c69dbe044e4f3f2711be96e5ea80db0686b3eb Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-02mb/system76/*: CMOS: Drop power_on_after_fail optionTim Crawford
Our boards do not boot if power_on_after_fail=Disable. Drop the option and use the default of powering on. Change-Id: Ia1857e52f838337048f79f8ca5c12d669cae321a Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-02mb/google/brya: Correct AT24 NVM address sizeVarshit B Pandya
Currently, the address size field of AT24 NVM is incorrect, and Linux v5.10 kernel logs the message below: at24 i2c-PRP0001:01: Bad "address-width" property: 14 The valid size of the AT24 NVM is 16 bits so modify the value from 0x0E to 0x10. TEST=Boot brya and check the kernel log and see "Bad address-width" error message is not shown. Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I6c1ed5334396e0ca09ea0078426a7b5039ae4e8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-11-02mb/google/brask: add the mkbp deviceZhuohao Lee
In order to let the ec passing the key event like recovery and power key to the OS, we need to include EC_ENABLE_MKBP_DEVICE to generate the MKBP device. BUG=b:204519353, b:204512547 BRANCH=None TEST=pressed recovery key and power button in the OS and checked the UI behavior. Change-Id: Ia1d0b9b301994ad9a0f4bf28b75ab0310a1d63a0 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-02mb/siemens/mc_ehl1: Clean up PCIe root port settings in devicetreeWerner Zeh
PCIe root ports #5 (00:1c.4) and #6 (00:1c.5) are not used on this mainboard and are not routed either, so remove them from the devicetree completely. PCIe root port #7 (00:1c.6) is connected and used. Add the missing settings for L1 substates and latency reporting to disable these features for this port as well. Change-Id: I06f59f0369ffcd958b5fe12bb3c646d37103811f Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58568 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-02mb/siemens/mc_ehl1: Clean up devicetreeWerner Zeh
There are a bunch of devices in the devicetree that are disabled in FSP-S and not used on this board. Having them around in the devicetree, even if disabled, is not necessary and leads to a message in the log (left over static devices...check your devicetree). This commit cleans up devicetree.cb and removes all unused and disabled devices. Change-Id: Ia5ffb382e3524e61b8583aca801063942fe2f247 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-11-02mb/google/zork/var/vilboz: Generate new SPD ID for new memory partsFrank Wu
Add new memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1. Hynix H5ANAG6NCJR-XNC 2. Micron MT40A512M16TB-062E:R 3. ADATA 4JQA-0622AD BUG=b:199469240 BRANCH=firmware-zork-13434.B TEST=FW_NAME=vilboz emerge-zork coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I57cca403800d9731a7b689ac9773a7940e83904e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-01soc/intel/braswell: Set GNVS DPTE via devicetreeAngel Pons
Introduce the `dptf_enable` devicetree setting to set the DPTE GNVS field, as newer Intel platforms do. Change-Id: I88b746c64ca57604f946eefb00a70487a2fb27c0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-11-01mb/google/dedede/var/storo: Add fw_config probe for multi audio codecZhi Li
Compatible headphone codec "Realtek ALC5682I-VD" and "ALC5682I-VS" BUG=b:202463494 BRANCH=dedede TEST=ALC5682I-VD or VS audio codec can work normally Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com> Change-Id: Ib808ddadef1029d3f06eb2d68164243c386d4905 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-01mb/google/brya/var/brya0: add HPS as generic I2C peripheralDan Callaghan
Some brya0 units have HPS fitted and connected to PCH I2C2, rather than a user-facing camera. Because HPS uses I2C address 0x51, which may conflict with the user-facing camera EEPROM, introduce a new fw_config bit to indicate whether HPS is present. BUG=b:202784200 TEST=FW_NAME=brya0 emerge-brya coreboot chromeos-bootimage TEST=ectool cbi set 6 0x28191 4 # set bit 17 for HPS TEST=flashrom -p internal -w image-brya0.serial.bin Signed-off-by: Dan Callaghan <dcallagh@google.com> Change-Id: I322548bcfccf16ba571396bc88fd6fc03c036a4e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58646 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-01mb/google/brya: Enable DRIVERS_GENESYSLOGIC_GL9755 for braskDavid Wu
Enable DRIVERS_GENESYSLOGIC_GL9755 support for brask. BUG=b:197385770 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: If421e0df058b6f2b87267d5e3822940b90062f71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-01mb/google/brya/var/taeko: Add probe for MAX98357+ALC5682I_VSJoey Peng
Add probe function for the "VS" version of the audio amplifier so taeko can recgonize MAX98357 with ALC5682I_VS. BUG=b:202913837 TEST=FW_NAME=taeko emerge-brya coreboot and check taeko can recgonize MAX98357 with ALC5682I_VS Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: Id4ff2003ee6a6f6f4ad98694996689e1a84092c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com>
2021-11-01mb/google/dedede/var/kracko: Add Wifi SAR for krackoRobertChen
Add wifi sar for kracko BUG=b:194460420 TEST=emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage Change-Id: I83bca544c9f71142f95ea1137f732c182b3f29b7 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
2021-10-29mb/google/brya/var/brask: Correct the GPIO config of buzzerAlan Huang
GPP_B14 is used by buzzer and should be set to NF1 'SPKR'. BUG=b:198998974 TEST=emerge-brask coreboot depthcharge and verify if the buzzer beeps. Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Change-Id: I84978af152a7117c1f3398a9b7adde161db058dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/58692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-29mb/google/brya/anahera: Disable autonomous GPIO power managementWisley Chen
With cr50 fw 0.3.22 or older version, it needs to disable autonomous GPIO power management and then can update cr50 fw successfully. BUG=b:202246591 TEST=FW_NAME=anahera emerge-brya coreboot chromeos-bootimage. Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I9137b6264ee80bc9e00dfdc3ab3926bccb4bf47c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-29mb/google/brya/var/kano: disabled autonomous GPIO power managementDavid Wu
Used H1 firmware where the last version number is 0.0.22, 0.3.22 or less to production that will need to disable autonomous GPIO power management and then can get H1 version by gsctool -a -f -M BUG=b:201266532 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: If6783e0df1404c9a353061fb564210aa0d12896e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-29mb/prodrive/hermes: Enable LTR for all PCIe portsAngel Pons
Set the `PcieRpLtrEnable` option to enable the LTR capability on all PCH PCIe root ports. TEST=Verify LTR capability enabled in `DevCap2` using `lspci -vv` Change-Id: I07ea37d178ea61d904c4f131fdea31479e899ef3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58326 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-29mb/prodrive/hermes: Map PCIe clocks to root portsAngel Pons
Map each PCIe clock source to the corresponding root port. Also, correct the CLKREQ# mapping for clock sources not associated to any CLKREQ# pin. The default `PcieClkSrcClkReq` value of 0 corresponds to CLKREQ# 0. TEST=Check that Linux sees the same PCIe devices with this commit: - All 5 onboard Ethernet NICs - BMC - Two random graphics cards in PEG0 and PEG1 slots - M.2 M NVMe SSD Change-Id: I0515877a36d42fb8858a0f0b3c0af1199a18d9af Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-29mb/prodrive/hermes: Fix PCIe ClkSrc configurationAngel Pons
Correct the PCIe clock source configuration as per the schematics. Apparently, FSP does not turn off unused PCIe clock sources when using SPS (Server Platform Services) firmware, but it does when using CSME firmware. TEST=BMC and Ethernet NICs get detected when using CSME firmware. Change-Id: Id25a34816f512510640db95251a7a792c1eebe62 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-29Revert "mb/intel/adlrvp: Remove EC region"Bernardo Perez Priego
This reverts commit 0a1602217fd0d60c59a497cb83a23b44cf4973d9. EC region is required in order to provide unified coreboot image for Chrome and Windows SKU RVP's. Also removing EC region causes a regression for ADL-P platforms. With this patch EC region is included back into flash map. Change-Id: I0f7f2b5dd392b08e1978a3b3f3236eac0dab1f12 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-10-29mb/google/brya/var/kano: Add fw_config probe for MIPI cameraDavid Wu
Add fw_config probe for MIPI OVTI2740 camera BUG=b:194926283 TEST=FW_NAME=kano emerge-brya coreboot Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ic5a7cebf1f5c847c01e951a237af691e0ad6c73d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-28mb/google/brya/var/taeko: add HPS as generic I2C peripheralDan Callaghan
BUG=b:202784200 TEST=FW_NAME=taeko emerge-brya coreboot chromeos-bootimage Signed-off-by: Dan Callaghan <dcallagh@google.com> Change-Id: I400719d762b001811f809f9549fd030dff9928d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-28drivers/net/r8168.c: Guard against generating power resourceArthur Heymans
Not all platforms need to generate power resources, but the code does not get optimized out at build time because the devicetree gets compiled into a linked list. As this code pulls in some heavy ACPI dependencies that is even implemented with weak empty function it makes sense to optimize out this code using a Kconfig constant. This saves 1.5K in ramstage size on gigabyte/ga-945gcm-s2l. Change-Id: I82289aa7e6e82318417f3b827b86182891dfc2a6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58657 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-28mb/google/guybrush/var/nipperkin: update telemetry settingsKevin Chiu
Currently, the AMD SDLE stardust test fails with incorrect VDD/SOC scale/offset value, it needs to update the two load line slope settings for the telemetry. AGESA sends these values to the SMU, which accepts them as units of current. Proper calibration is determined by the AMD SDLE tool and the Stardust test. VDD scale: 92165 -> 73457 VDD offset: 412 -> 291 SOC scale: 30233 -> 30761 SOC offset: 457 -> 834 BUG=b:200194315 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage pass AMD SDLE/Stardust test Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: If53c173000a276a80247ccb08736280a25948939 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-27mb/google/guybrush: Move EN_PWR_FP from GPIO_32 to GPIO_3Rob Barnes
EN_PWR_FP is used to enable power to the FPMCU. This frees up GPIO_32 for other uses. This move applies to all board except: * Guybrush * Nipperkin board version 1 Add callbacks for variants to override fpmcu shtudown gpio table and fpmcu disable gpio table. BUG=b:202992077 TEST=Build and boot to OS in Guybrush and Nipperkin. Ensure fingerprint still works. Change-Id: I4501554da0fab0cb35684735e7d1da6f20e255eb Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27mb/google/guybrush: Move GSC_SOC_INT_L from GPIO_3 to GPIO_85Karthikeyan Ramasubramanian
GSC_SOC_INT_L gpio is used by Google Security Chip (GSC) to interrupt SoC when the SoC is in S0 state. Hence use GPIO_85 which is in S0 domain and save the GPIO_3 in S5 domain for other use-cases. This move applies to all board except: * Guybrush * Nipperkin board version 1 Update the GPIO configuration, device tree configuration accordingly. BUG=b:202992077 TEST=Build and boot to OS in Guybrush and Nipperkin. Ensure that the SoC <-> TPM communication is working fine. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I019f10f2f457ab81bcff77ce8ca609b2b40cb2ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/58638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27mb/google/guybrush: Fix GPIO overrides during verstageKarthikeyan Ramasubramanian
GPIO overrides are defined for verstage. But the overrides are neither enabled nor applied during verstage. Enable the overrides and apply them during verstage. BUG=None TEST=Build and boot to OS in Guybrush. Perform suspend/stress, warm and cold reboot cycling for 10 iterations each. Ensure that all the PCIe devices are enumerated fine. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I510313bf860d8d55ec3b04a9cfdfa942373163f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27mb/google/brya/var/gimble: disabled autonomous GPIO power managementMark Hsieh
Used H1 firmware where the last version number is 0.0.22, 0.3.22 or less to production that will need to disable autonomous GPIO power management and then can get H1 version by gsctool -a -f -M BUG=b:200918380 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I83cc1a5d80bf23d052e83c9791ef866966a3d9b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58626 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-27mb/google/dedede/var/lantis: Generate new SPD ID for new memory partsWisley Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:204015941 TEST=run part_id_gen to generate SPD id Change-Id: I78ec575d354a5ae7c014a6050364d0a5214e4e92 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com>
2021-10-27mb/google/dedede/var/driblee: Generate new SPD ID for new memory partsFrank Wu
Add new memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: 1. K4U6E3S4AB-MGCL 2. H54G46CYRBX267 BUG=b:204023388 BRANCH=firmware-keeby-14119.B TEST=FW_NAME=driblee emerge-keeby coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I1b40e24faf8d85f32839a3d44fd936ca7ee7e09f Reviewed-on: https://review.coreboot.org/c/coreboot/+/58572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-27mb/google/guybrush: Remove WWAN_DISABLE GPIOKarthikeyan Ramasubramanian
In-band controls work to enable/disable the WWAN module. Hence WWAN_DISABLE_GPIO is not critical and can be marked as not connected. BUG=b:188415287 TEST=Build and boot to OS in Guybrush. Ensure that the WWAN module is enumerated on boot and reboot. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I7fefba3de9c749971911b21ed4712e950cef5a6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-27mb/google/guybrush: Update SD_AUX_RESET_L signalKarthikeyan Ramasubramanian
On all upcoming variants and board versions of existing variants, SD_AUX_RESET_L signal moves from GPIO_69 to GPIO_5. This means all boards except: * All board versions of Guybrush * Nipperkin Board Version 1. Also in Nipperkin, LCD_PRIVACY_PCH signal moves from GPIO_5 to GPIO_18. Configure the gpios accordingly in baseboard, guybrush and nipperkin variants accordingly. Also update the DXIO port descriptor for SD PCIe engine with the corresponding AUX reset GPIO. BUG=b:202992077 TEST=Build and boot to OS in Guybrush & Nipperkin. Ensure that the SD Controller and SD Card are enumerated fine. Ensure that the enumeration is successful after a suspend/resume cycle. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: If28810747e6b4eaae2a693a98e1adc830f80bcf6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-27mb/google/brya/var/kano: Disable unused PCIE root port in devicetreeDavid Wu
The baseboard enables PCIe RPs 6, 8 and 9, but kano doesn't use these. Having them enabled will occasionally cause suspend attempts to fail, therefore disable them in the overridetree. BUG=b:203389490 b:192370253 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ie2b82cff6d910c961eeb56704dcbae2bdc2a8c53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/guybrush: Reconfigure GPIO_5Karthikeyan Ramasubramanian
On Guybrush, pen is stuffed and GPIO_5 is used to enable Pen power. On Nipperkin board version 1, pen is not stuffed and instead the GPIO is used to control LCD Privacy settings. On upcoming Nipperkin board versions and other variants, GPIO_5 is not used. Configure GPIO_5 accordingly. BUG=b:202992077 TEST=Build and boot to OS in Guybrush. Ensure that the configuration is retained on existing boards. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I2aa2f16282b91f157701212ee27ddd2e89918767 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-27mb/siemens/chili: Drop redundant Kconfig selectAngel Pons
The `SMBIOS_PROVIDED_BY_MOBO` Kconfig option is already selected through the `SECUNET_DMI` option. So, there's no need to select both of them. Change-Id: I784df87893043a011906af8808aff27d636c7626 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58625 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-27mb/google/dedede/var/drawcia: Generate new SPD ID for new memory partsWisley Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:204014463 TEST=run part_id_gen to generate SPD id Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I43df98d84c6a274d6f96c8818ce6acff9337d8d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-27mb/google/dedede/var/haboki: Generate new SPD ID for new memory partsWisley Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Micron MT53E512M32D1NP-046 WT:B Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:204015944 TEST=run part_id_gen to generate SPD id Change-Id: Icf2f7352a4bd6a58e3e7abdcaac823b863984732 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-27mb/google/brask: Correct GPIO GPP_R6 and GPP_R7 settingDavid Wu
Correct GPIO GPP_R6 and GPP_R7 setting to NF2 (DMIC_CLK1 and DMIC_DATA1). BUG=b:197385770 TEST=emerge-brask coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia3813306f8c7b69fe5cf0e188c55256b68d329ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/58578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/brya/var/kano: Update the FIVR configurationsDavid Wu
This patch set disables the external voltage rails since kano board doesn't have V1p05 and Vnn bypass rails implemented. BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia1f3f4b2ada0154c716aedd521d4151124411ba3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/guybrush/var/nipperkin: config eSPI alert as in-bandKevin Chiu
To prevent unexpected alert from eSPI to SOC, configure this alert pin to in-band. BUG=b:199458949,b:203446084 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I18d38fe504bd9f2069b9977d5a35729691f672d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-27mb/google/guybrush/var/nipperkin: Add G2 GTCH7503 HID TS supportKevin Chiu
Follow up the G2 spec: G7500_Datasheet_Ver.1.2 BUG=b:203607764,b:202090378 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage TS is functional Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I98dd3095043ab537d91e81b84944779240b203ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/58564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-26intel/adlrvp: Add sub-regions to SI_ME in chromeos.fmdFurquan Shaikh
This change adds sub-regions to SI_ME in chromeos.fmd. These are required to support stitching of CSE components. BUG=b:189177538 Change-Id: Ife48aafcec43555175aad44f8b6307beeaea9184 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58592 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-26mb/google/dedede/var/blipper: Add fw_config probe for multi audio codecYongkun Yu
Compatible headphone codec "Realtek ALC5682I-VD" and "ALC5682I-VS" BUG=b:197694580 BRANCH=dedede TEST=ALC5682I-VD or VS audio codec can work normally Signed-off-by: Yongkun Yu <yuyongkun@huaqin.corp-partner.google.com> Change-Id: I422f206b8f1f3705a65808041f1a1544c461b431 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-26mb/prodrive/hermes: Remove overridetreeAngel Pons
There's no need to have an overridetree with a single board variant. TEST=Compare static.c and observe only device order has changed. Change-Id: I2097e247c27d5d0c5479cb533b477cd490a4c827 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-26mb/prodrive/hermes: Reorganize per-port PCIe settingsAngel Pons
Move per-port PCIe settings inside the corresponding PCIe root port device. Also, remove several unnecessary and/or redundant comments. Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical. Change-Id: I3f64d56b3b2c592194b18ae7b7c63ef41a1e060f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-25mb/google/guybrush/var/nipperkin: override dxio to turn off WLAN ASPM L1.2/L1.2Kevin Chiu
turn off WLAN ASPM L1.1/L1.2 as a short-term w/a for WLAN AP probe failure. BUG=b:198258604 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage AP is able to be probed by wlan module Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Ic7be523626b0ff6e4b1c66ba6af13b15061ef4cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-25mb/google/brya/variants/gimble: Enable Bluetooth offload supportMac Chiang
Enable CnviBtAudioOffload UPD BUG=b:199180746 TEST=emerge-byra coreboot Signed-off-by: Mac Chiang <mac.chiang@intel.com> Change-Id: Ic507b1d0f7c2f38de8d24247cd677b897a7463f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-22AGESA binaryPI: Use common acpi_fill_madt()Kyösti Mälkki
Change-Id: I01ee0ba99eca6ad4c01848ab133166f8c922684d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-22arch/x86/ioapic: Select IOAPIC with SMPKyösti Mälkki
For coreboot proper, I/O APIC programming is not really required, except for the APIC ID field. We generally do not guard the related set_ioapic_id() or setup_ioapic() calls with CONFIG(IOAPIC). In practice it's something one cannot leave unselected, but maintain the Kconfig for the time being. Change-Id: I6e83efafcf6e81d1dfd433fab1e89024d984cc1f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22mb/emulation/qemu-i440fx: Select IOAPICKyösti Mälkki
For SMP operation IOAPIC needs to be configured. For a build with MAX_CPUS=1 emulation might still decode the IOAPIC MMIO window, it does not really matter to have it always reserved. Change-Id: Ia340fc418cd9ceda56a2a10972e130d9f289c589 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-22cpu/x86/mp_init: move printing of failure message into mp_init_with_smmFelix Held
Each CPU/SoC checks the return value of the mp_init_with_smm and prints the same error message if it wasn't successful, so move this check and printk to mp_init_with_smm. For this the original mp_init_with_smm function gets renamed to do_mp_init_with_smm and a new mp_init_with_smm function is created which then calls do_mp_init_with_smm, prints the error if it didn't return CB_SUCCESS and passes the return value of do_mp_init_with_smm to its caller. Since no CPU/SoC code handles a mp_init_with_smm failure apart from printing a message, also add a comment at the mp_init_with_smm call sites that the code might want to handle a failure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I181602723c204f3e43eb43302921adf7a88c81ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/58498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-21cpu/x86/mp_init: use cb_err as mp_init_with_smm return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of mp_init_with_smm against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibcd4a9a63cc87fe176ba885ced0f00832587d492 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21mb/google/brya/var/kano: Correct GPIO GPP_R6 and GPP_R7 settingDavid Wu
Correct GPIO GPP_R6 and GPP_R7 setting to NF2 (DMIC_CLK1 and DMIC_DATA1). BUG=b:202913826 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ibf8ff0e48c4bab435d082dee27bcd53bc85b088d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: CT Lin <ctlin0@nuvoton.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21mb/google/brya/var/brask: Correct SSD power sequenceDavid Wu
M.2 spec describes PERST# should be sequenced after power enable. BUG=b:197385770 TEST=emerge-brask coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia7e5c7b1a2194d53d98865d33cf1bc6111572876 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21mb/google/guybrush/var/nipperkin: Enable GPP2 for NVMe bridge eMMC storageKevin Chiu
BUG=b:195269555 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage eMMC sku is bootable Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: If9e0fdc1667cbaac05fdf4c6689d47a561016c9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-21mb/google/guybrush/var/nipperkin: Override GPIO configurationKarthikeyan Ramasubramanian
SOC_PEN_DETECT_ODL, SOC_SAR_INT_L and WWAN_AUX_RESET_L are not connected in nipperkin. Override those GPIO configurations. BUG=None TEST=Build and boot to OS in Nipperkin. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I7e497f83593472ecf4927e5379e1dd7786e77e62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
2021-10-21mb/google/guybrush: Add PCIe Reset GPIO18 to PCIE WWAN DXIO DescriptorKarthikeyan Ramasubramanian
WWAN_AUX_RST_L is asserted during S0i3 entry. But it needs to be de-asserted before PCIe link training during S0i3 resume. Otherwise the concerned gpp_bridge_2 PCIe device is not enumerated on Soi3 resume. This change feeds in the WWAN_AUX_RST_L GPIO in the DXIO descriptor so that SMU de-asserts this reset on S0i3 resume. BUG=b:199780346 TEST=Build and boot to OS in Guybrush. Perform suspend/resume cycles for 500 iterations. Ensure that the PCIe devices enumerate fine. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I588c490bf3f8a7beffefc3bfd8ca5167fcbcb9a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-21mb/google/guybrush: Make DXIO Port Descriptor configurableKarthikeyan Ramasubramanian
Instead of a const port descriptor, make it configurable. This will help to avoid adding duplicate tables for every minor configuration updates. BUG=None TEST=Build and boot to OS in Guybrush. Perform suspend/resume, warm and cold reboot cycles for 10 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: If616a08ba54fddab25e5d0d860327255dfd43cbe Reviewed-on: https://review.coreboot.org/c/coreboot/+/58378 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-21mb/google/brya/var/kano: Enable BT offload supportDavid Wu
Enable the CnviBtAudioOffload UPD and program the corresponding BT VPGIOs. BUG=b:202913826 TEST=emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Id81cba82742f552c098ec3719a0b453b752dc5c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21mb/google/trogdor: determine which panel to use by panel_id for quackingstickSheng-Liang Pan
panel_id 6 for AUO B101UAN08.3. BUG=b:201263032 BRANCH=none TEST=make Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I076ded9300c2ec1704a566722870bd0d1a20e9d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58363 Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-21mb/google/dedede/var/bugzzy: Add LTE power off sequenceSeunghwan Kim
This change adds LTE power off sequence for bugzzy. BUG=None BRANCH=dedede TEST=FW_NAME=bugzzy emerge-dedede coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I6be0e23b9c2c2bed9745011920394006fdaabae6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-21mb/google/dedede/var/bugzzy: Enable/disable LTE function based on FW_CONFIGSeunghwan Kim
Enable/disable LTE function based on DB_PORTS field of FW_CONFIG. - GPIO control - USB port setting BUG=None BRANCH=dedede TEST=FW_NAME=bugzzy emerge-dedede coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I8363f8e7052ff9cfa423063a7e8f5a0f9ce1df2c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-20google/trogdor: Support Parade ps8640Philip Chen
Support Parade ps8640 as the second source edp bridge for some trogdor board variants/revisions. BUG=b:194741013 BRANCH=trogdor TEST=verified firmware screen works on lazor rev9 Change-Id: Iae5ccd8d9d33d60e4c37011ecffdd7a05af59ab2 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-10-20mb/google/brya/var/redrix: Enable bt_offload supportMac Chiang
Enable CnviBtAudioOffload UPD and program the corresponding VGPIO pins BUG=b:191931762 TEST=emerge-coreboot Signed-off-by: Mac Chiang <mac.chiang@intel.com> Change-Id: I81bae537d52592e878db56343970de6fc488950f Reviewed-on: https://review.coreboot.org/c/coreboot/+/58288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-20mb/intel/adlrvp: Rework KconfigFelix Singer
Rework Kconfig file that each variant has its own config option with their specific selects / configuration and move common selects to `BOARD_INTEL_ADLRVP_COMMON`, which is used as base for each variant. Also, move selects from Kconfig.name to Kconfig that the configuration is at one place and not distributed over two files. Built each variant with `BUILD_TIMELESS=1` and all generated coreboot.rom files remain identical. Excluded the .config file by disabling `INCLUDE_CONFIG_FILE` to make this reproducible. Change-Id: If68c118f22579cc0a3db570119798f0f535f9804 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56221 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-20mb/intel/adlrvp_m: Enable touchpadBernardo Perez Priego
These changes include ELAN touchpad to ACPI tables and configure GPIO's. BUG=None Test=Boot board, touchpad should be functional Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I78e5e133f7d3af47395819a79638a90fee4fd19e Reviewed-on: https://review.coreboot.org/c/coreboot/+/57863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-10-20mb/intel/adlrvp: Remove EC regionBernardo Perez Priego
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Ic76c29069beb510dd7620f340e0aab212668c3f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-10-20mb/google/brya/anahera: Add two thermal sensor settingWisley Chen
Anahera has 4 thermal sensors, so add the missing sensors settings. BUG=b:203187535 TEST=build and verified by thermal team. Change-Id: I0e5c0d9c09c88cc95fdfd77b96800a0f4929d7d2 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-20mb/google/brya/anahera: Update HID to MX98360AWisley Chen
Because of a change in the chromium OS kernel machine driver for the MAX98357A, a _HID that matches MAX98360A has to be used. (https://chromium- review.googlesource.com/c/chromiumos/third_party/kernel/+/3070268/) BUG=b:200778066 TEST=FW_NAME=anahera emerge-brya coreboot Change-Id: Ic68373920d9135e614ff792149079de451ec6e60 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-20mb/google/taeko: enable DPTF functionality for taekoKevin Chang
Enable DPTF functionality for taeko BRANCH=None BUG=b:203035930 TEST=Built and tested on taeko board Change-Id: Ic9f3cbf5cd52ebc48b274b43fcdb57a51dcf94ec Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-10-20mb/google/brya/var/anahera: change from CLKREQ#2 to CLKREQ#6 for eMMCWisley Chen
Based on the latest schematics, change eMMC CLKREQ from CLKREQ#2 to CLKREQ#6 BUG=b:197850509 TEST=build and boot into eMMC Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I0fc87c864b62a37fc3fa7a4a9a7722bf286c007b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-20mb/google/dedede/var/bugzzy: Generate SPD ID for Samsung K4U6E3S4AB-MGCLSeunghwan Kim
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the memory parts. The memory parts being added are: 1. Samsung K4U6E3S4AB-MGCL BUG=None TEST=emerge-dedede coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I0720a51336f374f709c392c4bae4ad3e4c580a2f Reviewed-on: https://review.coreboot.org/c/coreboot/+/58409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-20mb/google/dedede/var/sasuke: Generate SPD ID for Samsung K4U6E3S4AB-MGCLSeunghwan Kim
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the memory parts. The memory parts being added are: 1. Samsung K4U6E3S4AB-MGCL BUG=None TEST=emerge-dedede coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I91183f33b92569dd49967ef866d58043d79c287b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-20mb/google/brya/var/taeko: Add fw_config probe for ALC5682-VSJoey Peng
ALC5682-VD/ALC5682-VS load different kernel driver by different _HID. Update the _HID depending on the AUDIO field of fw_config.Define fw config bit 5-7 in coreboot for codec. BUG=b:202913837 TEST=FW_NAME=taeko emerge-brya coreboot Change-Id: I635b173e0fe4c46d28f2c29fecee1998b29499b1 Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-20mb/intel/jasperlake_rvp: Rework KconfigFelix Singer
Rework Kconfig file that each variant has its own config option with their specific selects / configuration and move common selects to `BOARD_INTEL_JASPERLAKE_RVP_COMMON`, which is used as base for each variant. Also, move selects from Kconfig.name to Kconfig that the configuration is at one place and not distributed over two files. Built each variant with `BUILD_TIMELESS=1` and all generated coreboot.rom files remain identical. Excluded the .config file by disabling `INCLUDE_CONFIG_FILE` to make this reproducible. Change-Id: Ic7552195ed5a3ae6ab8e456d7d38d5539a052009 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-10-19mb/intel/kblrvp: Rework KconfigFelix Singer
Rework Kconfig file that each variant has its own config option with their specific selects / configuration and move common selects to `BOARD_INTEL_KBLRVP_COMMON`, which is used as base for each variant. Built each variant with `BUILD_TIMELESS=1` and all generated coreboot.rom files remain identical. Excluded the .config file by disabling `INCLUDE_CONFIG_FILE` to make this reproducible. Change-Id: I2a9c12a15c098fcb64c006a707c94a1aed93d73a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-19mb/intel/coffeelake_rvp: Rework KconfigFelix Singer
Rework Kconfig file that each variant has its own config option with their specific selects / configuration and move common selects to `BOARD_INTEL_COFFEELAKE_COMMON`, which is used as base for each variant. Also, move selects from Kconfig.name to Kconfig so that the configuration is at one place and not distributed over two files. Built each variant with `BUILD_TIMELESS=1` and all generated coreboot.rom files remain identical. Excluded the .config file by disabling `INCLUDE_CONFIG_FILE` to make this reproducible. Change-Id: I3b3d3cff5ea7a3f4d1c4ddd911240763e4891e06 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Thomas Heijligen <src@posteo.de>
2021-10-19mb/google/brya/var/kano: Correct SSD power sequenceDavid Wu
M.2 spec describes PERST# should be sequenced after power enable. BUG=b:192137970 TEST=FW_NAME=kano emerge-brya coreboot and boot to OS. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I20bf5ca66c6d05229c6d72058c5a73f38a58be3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-19mb/google/brya: Set same size for CSE_RW, ME_RW_A and ME_RW_BFurquan Shaikh
CSE RW firmware from ME_RW_A/ME_RW_B is copied over to CSE_RW region in case of firmware update. Ensure that the size of the regions match so that we do not have situations where ME_RW_A/B firmware grows bigger than what CSE_RW can hold. BUG=b:189177538 Change-Id: I374db5d490292eeb98f67dc684c2106d42779dac Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-19mb/google/brya: Add sub-regions to SI_ME in chromeos.fmdFurquan Shaikh
This change adds sub-regions to SI_ME in chromeos.fmd. These are required to support stitching of CSE components. BUG=b:189177538 Change-Id: I4da677da2e24b0398d04786e71490611db635ead Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-19cpu/intel/speedstep: Constify `get_cst_entries()`Angel Pons
Make the `get_cst_entries()` function provide a read-only pointer. Also, constify the actual data where applicable. Change-Id: Ib22b3e37b086a95af770465a45222e9b84202e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-19mb/google/guybrush/dewatt: update DRAM tableKenneth Chan
Samsung LPDDR4X 4266 2G K4U6E3S4AB-MGCL Hynix LPDDR4X 4266 2G H54G46CYRBX267 Micron LPDDR4X 4266 2G MT53E512M32D1NP-046 WT:B Micron LPDDR4X 4266 4G MT53E1G32D2NP-046 WT:B BUG=b:203014978 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I31ec5b84b5ad2e8d0aedf41ceb56f9e5f7fa538a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58313 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-18ACPI: Have common acpi_fill_mcfg()Kyösti Mälkki
As long as there is only one PCI segment we do not need more complicated MCFG generation. Change-Id: Ic2a8e84383883039bb7f994227e2e425366f9e13 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-18mb/intel/adlrvp_m: Enable retimer force power gpioBernardo Perez Priego
Retimer FORCE_PWR GPIO is a debug GPIO, that has to be set LOW, to allow Retimer LC Domain to toggle during a switch from DP Alt to TBT Alt modes. Contrary to DS specifying it may be left unconfigured, hence floating, there are instances seen during boot, where it stays HIGH (adlmrvp) or LOW (adlprvp). Hence configure it to LOW. Branch=none Bug=none Test=Boot to OS, connect TBT dock which enumerates in DP Alt, Login, TBT dock enumerates in TBT Alt Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I0ff58823785a31c70535ad9c913c06a653884a2c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-10-17drivers/generic/ioapic: Drop enable_virtual_wireKyösti Mälkki
All boards with DRIVERS_GENERIC_IOAPIC select it. Presumably the related configuration of routing IRQ0 when IOAPIC is enabled should be always done to provide i8259 legacy compatibility for payloads. Change-Id: Ie87816271fa63bba892c8615aa5e72ee68f6ba93 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel/skylake: switch to common ACPI codeMichael Niewöhner
Use the common ACPI code to reduce code duplication. After this change, `PSS_MAX_ENTRIES` is honored correctly in P-state table generation (as of commit c2540a9) and the number reduces from 10 to 7 entries. Also, remnants of P_BLK support missed in CB:58096 will vanish. Tested on google/fizz: no errors in dmesg, ACPI tables remain the same (except PSS, as mentioned above). Change-Id: I1ec804ae4006a2d9b69c0d93a658eb3b84d60b40 Tested-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-10-17soc/intel/skylake: switch to common GNVSMichael Niewöhner
Switch to common GNVS. No additional fields to those being present in common GNVS are used by any SKL/KBL device. Thus, they're dropped completely. Change-Id: I87ab4ab05f6c081697801276a744d49e9e1908e0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-10-17Skylake boards: Drop setting useless `IRQ_SLOT_COUNT`Angel Pons
The `IRQ_SLOT_COUNT` value is only meaningful when generating a PIRQ table. None of these boards do it, so specifying this value achieves absolutely nothing. Drop it to prevent further useless copy-pasting. Change-Id: I2d63b850c03fc1471c0eef180e8b621311b2c336 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-10-16soc/amd/stoneyridge/include/iomap: rename I2C[ABCD]_BASE_ADDRESS definesFelix Held
Picasso and Cezanne define and use APU_I2C[01234]_BASE for the base addresses of the I2C controllers, so align Stoneyridge with this. The ACPI device names aren't changed from I2C[ABCD] to I2C[0123] for now since this might change behavior in the OS and would also change the resulting binary of a timeless build. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9c400c073eba5c14bd35703b717f75df89a8719d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58370 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-16mb/google/brya/var/taeko: Add fw_config probe for GL9750 and RTS5232SJoey Peng
Add support for SD card reader GL9750 and RTS5232S BUG=b:203014989 TEST=FW_NAME=taeko emerge-brya coreboot Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I4353a094e2035ce94b5dd1a737e7e7009ad0614e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-16mb/google/brya/variants/primus: To fine tune WWAN power sequencingAriel Fang
Follow the spec to correct the WWAN poweron and powerdown sequences. BUG=b:195625346 TEST=USE="project_primus emerge-brya coreboot" and verify it builds without error. Signed-off-by: Ariel Fang <ariel_fang@wistron.corp-partner.google.com> Change-Id: I232d283a9d6093f5da64fcdce44e5cb640e3df0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58319 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-15mb/google/brya/var/taeko: Include driver for GL9763E for eMMC boot diskKevin.Chang
Support GL9763E as a eMMC boot disk BRANCH=none BUG=b:202192686 TEST=enable DRIVERS_GENESYSLOGIC_GL9763E and check eMMC on taeko. Cq-Depend: chromium:3153210 Signed-off-by: Kevin.Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I5db2b229ce1bbea54efe15f5288f13f8d4656899 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com>
2021-10-15mb/google/guybrush/bootblock: add comment about LPC_LDRQ0_PU,PD_ENFelix Held
The definition of those bits changed between Picasso and Renoir/Cezanne so add a comment where those bit definitions are used as well. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If1cf4b06fc35f94cbd482f2869fcc64739e7d272 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15mb/google/guybrush/bootblock: drop redundant clearing of LPC decodesFelix Held
The writes were originally added due to being part of the initialization sequence in the reference code, but coreboot already has those registers cleared by the time we reach this part of the code, so we can drop these redundant writes. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I43344460e5355664841d77daf1df3fd386e047e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15mb/google/kahlee/treeya/audio: use proper I2C base address defineFelix Held
I2C_BASE_ADDRESS is the beginning of the MMIO space that contains the I2C controllers MMIO. I2C[ABCD]_BASE_ADDRESS are the base addresses of the 4 I2C controllers, so use I2CA_BASE_ADDRESS instead here. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie8d6a438f76cd33929f5070f9ec6b2f280f471a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15Revert "vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main"Hsuan-ting Chen
This reverts commit 6260bf712a836762b18d80082505e981e040f4bc. Reason for revert: This CL did not handle Intel GPIO correctly. We need to add GPIO_EC_IN_RW into early_gpio_table for platforms using Intel SoC. Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Change-Id: Iaeb1bf598047160f01e33ad0d9d004cad59e3f75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57951 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-15mb/google/dedede/var/corori: Configure I2C times for TouchpadIan Feng
Configure I2C high / low time in the device tree to ensure Touchpad I2C CLK runs accurately between 380 kHz and 400 kHz. Measured I2C frequency just as below after tuning: Touch Pad CLK: 389.2 KHz BUG=b:202787528 TEST=Build and check after tuning I2C clock is between 380 kHz and 400 kHz Change-Id: I0f9d062fc611de0062a39849aee1174268391682 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-15mb/google/dedede/var/sasukette: Add PIXA2635 touchpadZhi Li
Add PIXA touchpad into devicetree for sasukette. BUG=b:202796169 BRANCH=dedede TEST=built sasukette firmware and verified touchpad function Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com> Change-Id: I5bc8353692a753ec9254ab02b4ff0481386624b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-24 04:24:16 +0000