summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2020-11-24mb/google/volteer: fw_config: Add setting for new sd readersZhuohao Lee
This patch adds three settings for the new sd readers. The new assigned values are: 1. RTS5227S: 3 2. L9750: 4 3. SD_OZ711LV2LN: 5 BUG=b:173676531 BRANCH=volteer TEST=abuild -t google/volteer Change-Id: I595695f99d3298f146fcdb7c2b942ce007ae9327 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-11-23mb/google/zork: correct USB2 phy TXVREFTUNE0 parameter nameKevin Chiu
From spec, [31:28] "HS DC Voltage Level Adjustment" is "TXVREFTUNE0". correct rx_vref_tune -> tx_vref_tune BUG=None BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I27003a952d8f8bdd8fe52af8a37010e23ee9cdfd Reviewed-on: https://review.coreboot.org/c/coreboot/+/47735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-23mb/siemens/mc_apl1: Use `pci_or_config16` functionAngel Pons
Change-Id: I93e09fc9801f6d32cade351bac0cba82f671acfe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: siemens-bot Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2020-11-23mb/clevo/cml-u: Get rid of gpio.h and use C files insteadFelix Singer
Split up gpio.h into two seperate compilation units, gpio.c and gpio_early.c, containing the complete configuration and a minimal configuration used in early stages. Tested on clevo/l140cu and it still boots. Change-Id: I5b056e8faac0c426a37501dbc175373c22dde339 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-23mb/clevo/cml-u: Get rid of cnl_configure_pads()Felix Singer
Get rid of cnl_configure_pads() since it is a hack for the FSP. Instead, hook up to the mainboard_ops driver and configure the GPIOs using .init. Tested on clevo/l140cu and it still boots. Change-Id: I75dd15ab6d2b3b72b3ad0398df87b349fd00bc3c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-23mb/clevo/cml-u: Move bootblock.c and ramstage.c to mb levelFelix Singer
Change-Id: Ifca49c656f259b08fb8ab47fe36e93c146f25266 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-23mb/clevo/cml-u: Use include folder for header filesFelix Singer
Change-Id: I50be3d9b829f624cbe460060c40482047f39774c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-23mb/clevo/cml-u: Move hda_verb.c to mainboard's MakefileFelix Singer
Move hda_verb.c from the variant's Makefile to the mainboard's Makefile, because every variant needs one. Change-Id: Ia94813f68620abcff48de4fdb117466c91f6863c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47820 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-23mb/**/cmos.layout: Indent everything with tabsAngel Pons
Time has shown that using spaces never converges into proper alignment. Change-Id: I5338aeaf139580f9eab3e1e02cb910080a95d2c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-11-23mb/**/cmos.layout: Remove crusty commentsAngel Pons
Most of these comments have been copy-pasted or serve no purpose other than to eventually turn into misleading info. While the description of the first 120 bits of CMOS could be useful, it should instead be added to the documentation for the CMOS option infrastructure, or /dev/null. Moreover, trim down newlines to no more than two consecutive newlines. Change-Id: I119b248821221e68c4e31edba71ba83b7d2e14e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-11-23mb/intel/adlrvp: Enable pre-boot display over HDMI-B portSubrata Banik
List of changes: 1. Configure CTRLCLK and CTRLDATA for HDMI 2. Enable Ddc and HPD for Port-B 3. Disable dual eDP configuration for Port-A and B TEST=Able to see depthcharge pre-boot screens over HDMI-B port. Change-Id: I7509b981f35fc60a7885b2b07067cb0d35ec625f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22mb/ocp/deltalake: Override SMBIOS type 4 cpu voltageTim Chu
Override SMBIOS type 4 cpu voltage. For Delta Lake, 1.6V is expected. Tested=Execute "dmidecode -t 4" to check if cpu voltage is correct. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I0ecbec8fb3dc79b8c3f3581d6193aade01bcd68e Reviewed-on: https://review.coreboot.org/c/coreboot/+/47562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2020-11-22mb/google/puff/var/dooly: update USB2 type-c strengthTony Huang
Based on USB DB report. BRANCH=puff BUG=b:163561808 TEST=build and measure by EE team. Change-Id: I379987b6d6d2a7aef33d4c42e589dc52d40205a3 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2020-11-22mb/google/volteer: Remove unused devices for terrador and todorDavid Wu
Remove the following devices - Goodix Touchscreen - SAR0 Proximity Sensor BUG=b:173480406 TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I6b56ca136533b53ff7e003a665be67fbe12c1ade Reviewed-on: https://review.coreboot.org/c/coreboot/+/47690 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-22mb/facebook/fbg1701/Kconfig: Add dependencyFrans Hendriks
VENDORCODE_ELTAN items are only used when USE_VENDORCODE_ELTAN is enabled. Add dependency of USE_VENDORCODE_ELTAN. Change-Id: Ibcc40014930c90e29904661f5ffa41bc688d368b Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-22mb/google/octopus: fix droid lte sku load specific wifi sar valueSheng-Liang Pan
This CL add droid lte sku 37 38 39 40 to load wifi_sar-droid.hex. BUG=none BRANCH=octopus TEST=emerge-octopus coreboot Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I55dda85b8f3e664d97834b712a2c6a48d1434010 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47697 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-22mb/google/volteer/var/voema: Update gpio and devicetree settingsDavid Wu
Based on latest schematic and gpio table of voema, update gpio and devicetree settings for voema Proto. BUG=b:169356808 TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I719a9948ed0d60e1de5368e096ff60c2345803b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-22mb/facebook/fbg1701: Add VBOOT supportFrans Hendriks
Add VBOOT support. Disable USE_VENDOR_ELTAN when VBOOT is enabled. Add FMD file and split binary into RW and RO region settings. Tested on Facebook FBG1701 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Change-Id: I641bca58c0f7c81d5742235c8b2c184d13c00c55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-11-22mb/kontron: Add Kontron mAL10 COMe module supportMaxim Polyakov
This patch adds support for the Kontron mAL10 COMe module with the Apollo Lake SoC together with Kontron T10-TNI carrierboard. Working: - UART console and I2C on Kontron kempld; - USB2/3 - Ethernet controller - eMMC - SATA - PCIe ports - IGD/DP - SMBus - HWM Not tested: - IGD/LVDS - SDIO TODO: - HDA (codec IDT 92HD73C1X5, currently disabled) Tested payloads: - SeaBIOS - Tianocore, UEFIPayload - without video, EFI-shell in console only Tested on COMe module with Intel Atom x5-E3940 processor (4 Core, 1.6/1.8GHz, 9.5W TDP). Xubuntu 18.04.2 was used as a bootable OS (5.0.0-32-generic linux kernel) Change-Id: Ib8432e10396f77eb05a71af1ccaaa4437a2e43ea Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22mb/google/sarien: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: I27c485c9c8c5d47a44fc050d8cf12c553bffd01e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-22mb/google/brya: Add new google brya mainboardTim Wawrzynczak
This commit is a stub for brya, which is a an Intel Alder Lake-P reference platform. BUG=b:173562731 TEST=util/abuild/abuild -p none -t google/brya -a -c max Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ia34130ff92a0a07063cb8e80527204b3a80184a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-11-22mb/*: Use ACPI_DSDT_REV_2 instead of hard-coded valueFelix Singer
Change-Id: I6c5b86c348386aa17ee42bdaf34aa388fe6207f9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-22mb/google/zork: update berknip CHTC thermal settingKevin Chiu
Update APU CHTC thermal temperature protection point: Temperature limit(C'): 90 Update system config=2 to meet TDP 15W design. BUG=b:162377903 BRANCH=zork TEST=1. emerge-zork coreboot 2. check CHTC temperature by AMD utility Change-Id: I03245a824d838c2d9468ae0fa3cfa34389560e9d Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-21mb/google/asurada: Get RAM code from ADC 3Yidi Lin
On Chromebooks the RAM code is implemented by the resistor straps that we can read and decode from ADC. For Asurada the RAM code can be read from ADC channel 3. Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Iaadabea1b6aa91c48b137f7c6784ab7ee0adc473 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-21zork: Create gumboz variantKevin Chiu
Create the gumboz variant of the dalboz reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:173536689 BRANCH=zork TEST=util/abuild/abuild -p none -t google/zork -x -a make sure the build includes GOOGLE_GUMBOZ Change-Id: I48db7eba7864c18e7307b45fe9f84073bfca0155 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-11-21mb/google/zork: update DRAM table for dirinbozKevin Chiu
Add Hynix DDR4 DRAM, index was generated by gen_part_id H5ANAG6NCJR-XNC BUG=b:173480390 BRANCH=zork TEST=emerge-zork coreboot Change-Id: Ib6f26a7b8d014493f4a256b328bee7ad3bf3c2b9 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-11-21util: Add new DDR4 H5ANAG6NCJR-XNC for zork boardsKevin Chiu
Add DDR4 part H5ANAG6NDMR-XNC. Attributes are derived from data sheets. BUG=None TEST=Compared generated SPD with data sheets and checked in SPD Change-Id: I324aefbce1b138a2f71aad3173d6a138cf7fa510 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-11-21mb/google/zork: update telemetry settings for WoomaxKane Chen
Update Woomax to improve the performance. BUG=b:168073070 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I2703d15f1fbe715ab1c684274d9e4e0bb55ef23b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-20mb/google/dedede/variants/madoo: Increase TCC offset from 5 to 10John Su
Increase TCC offset value from 5 to 10 for Thermal Control Circuit (TCC) activation. BUG=b:171531244 TEST=build and verify by thermal team Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ic2822b059f166779e1f0bcf92e753dad1078783c Reviewed-on: https://review.coreboot.org/c/coreboot/+/47691 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ben Kao <ben.kao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20mb/google/zork: Remove 50ms WIFI delayMartin Roth
As a part of trying to get our boot time as low as possible, any delays in the code should try to be refactored out. This removes the 50ms delay in the WIFI sequence by enabling power and putting the wifi module into reset in bootblock, then bringing it out of reset in ramstage. This is significantly longer than the 50ms requirement. The reset GPIO was already being set high in ramstage, so that code didn't need to be added. BUG=b:171513520 TEST=Boot on boards with different module types, WIFI works on both. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I211d3da338ad368d1f011f03cf7d05121c057075 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-20mb/google/volteer/var/elemi: Update gpioWisley Chen
1. Config EN_PP3300_SSD (GPP_B2) to gpo 2. EMMC_CLKREQ_ODL(GPP_C1) change to GPP_H11 3. WLAN_PERST_L (GPP_H10) change to GPP_H10 BUG=b:172630765, b:171467336 BRANCH=volteer TEST=emerge-volteer coreboot chromeos-bootimage and boot into emmc Change-Id: I9d112373c4ecd2cea5ce3d2d47b190c061d50da6 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47705 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20mb/google/volteer/var/elemi: enable Genesys Logic GL9763EWisley Chen
Enable Genesys GL9763E as PCI-to-eMMC bridge. BUG=b:171467336 BRANCH=volteer TEST=emerge-volteer coreboot Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I858c12151df5b6fc19132869317edfa1b090335d Reviewed-on: https://review.coreboot.org/c/coreboot/+/47040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-20mb/asus/f2a85-m_pro: Enable PCIe bridge 00:15.2 in AGESAPaul Menzel
Currently, the PCIe bridge 00:15.2 is not detected by coreboot, causing the connected network device also to be missing. This is caused by not configuring the third of the four PCIe General Purpose Ports (GPP) of the AMD Fusion Controller Hub (FCH), which can be exposed as one to four PCIe devices. So, enable it in AGESA but disable enumeration in coreboot. Otherwise, the serial console stops working in romstage after […] PCI: 00:15.1 bridge ctrl <- 0013 PCI: 00:15.1 cmd <- 06 PCI: 00:15.2 bridge ctrl <- 0013 PCI: 00:15.2 cmd <- 07 and the system hangs in the payload (SeaBIOS banner is shown on VGA attached monitor). TEST=Serial console and payload works, and Linux 5.10-rc2 configures PCIe bridge. Output of `lspci -t`: -[0000:00]-+-00.0 +-00.2 +-01.0 +-01.1 +-10.0 +-10.1 +-11.0 +-12.0 +-12.2 +-13.0 +-13.2 +-14.0 +-14.2 +-14.3 +-14.4-[01]-- +-14.5 +-15.0-[02]-- +-15.1-[03]----00.0 +-15.2-[04]----00.0 +-18.0 +-18.1 +-18.2 +-18.3 +-18.4 \-18.5 Change-Id: Ia1d60a212b0d249c7d8b3f8ec16baf5e93c985da Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46527 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20mb/clevo/kbl-u: Add Clevo N130WU/N131WUFelix Singer
Working: - TianoCore - NVMe, SATA3 - USB2, USB3 - Thunderbolt - Graphics (GOP and libgfxinit) - Sound - Webcam - WLAN, LAN, Bluetooth, LTE - Keyboard, touchpad - TPM - flashrom support; reading / flashing from Linux - ACPI S3 WIP: - Documentation Not working: - EC ACPI (e.g. Fn keys, battery and power information) Boots Arch Linux (Linux 5.8.12) successfully. Change-Id: I364f5849ef88f43b85efbd7a635a27e54d08c513 Signed-off-by: Felix Singer <felixsinger@posteo.net> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-20soc/mediatek: Move auxadc driver from MT8183 to commonPo Xu
The auxadc (auxiliary analogue-to-digital conversion) is a unit to identify the plugged peripherals or measure the temperature or voltages. The MT8183 auxadc driver can be shared by multiple MediaTek SoCs so we should move it to the common folder. Signed-off-by: Po Xu <jg_poxu@mediatek.com> Change-Id: Id4553e99c3578fa40e28b19a6e010b52650ba41e Reviewed-on: https://review.coreboot.org/c/coreboot/+/46390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-11-20mb/scaleway/tagada: GPIO on M.2 PCIe/SATA configure FSP HSIO lanesJulien Viard de Galbert
Change-Id: Ic3ed97fc2b54d4974ec0b41b9f207fe3d49d2cce Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-20mb/google/volteer: Add keyboard layout to fw_configDuncan Laurie
A new field was defined for different keyboard layouts, so add this field to the list and provide the two options that were defined. Change-Id: Ic357446725e34221040705929d54cbce94c5ab8b Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-20mb/google/volteer/variants: Set TCSS PCIe RP0 to hidden by defaultDuncan Laurie
Set the default state of the TCSS PCIe RP0 to hidden so that coreboot does not allocate resources to this hotplug root port. The default behavior on the reference design is that there is only one USB4 port attached to port C1 while port C0 is only a USB3 port. Meanwhile the Voxel and Terrador variants do have USB4 on both C0 and C1 ports, so these boards change the default to 'on' so that coreboot does allocate resources for the hotplug port. BUG=b:159143739 BRANCH=volteer TEST=build volteer and voxel and check the resulting static.c to ensure the device is hidden or not. Also boot with the two different configurations and ensure resources are assigned or not. Finally check that S0ix still functions with the C0 port set to 'hidden' after authorizing a PCIe tunnel on port C1. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I8bb05ae8cd14412854212b7ed189cfa43d602c1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/47198 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20mb/google/volteer: Set up SATAXPCIE1 IOSSTATE based on detected deviceDuncan Laurie
There is an issue with the storage device being mis-detected on exit from S0ix which is causing the root device to disappear if the power is actually turned off via RTD3. To work around this read the RX state of the pin and apply the IOSSTATE setting to drive a 0 or 1 back to the internal controller. This will ensure the device is detected the same on resume as on initial boot. BUG=b:171993054 TEST=boot on volteer with PCIe NVMe and SATA SSD installed in the M.2 slot and ensure this pin is configured appropriately. Additionally test with PCIe RTD3 enabled to ensure suspend/resume works reliably. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I85542151eebd0ca411e2c70d8267a8498becee78 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-20mb/google/volteer: Enable RTD3 for SD cardDuncan Laurie
Enable the PCIe RTD3 driver for the PCIe attached SD card interface and provide the enable/reset GPIOs. These GPIOs are common across all variants so this is implemented in the baseboard devicetree with an fw_config probe if the device is present. The RTS5261 device does not have an enable GPIO so it is disabled in a workaround in mainboard.c, along with marking the SD-Express device as external. BUG=b:162289926, b:162289982 TEST=Tested on Delbin platform to ensure the system can enter the S0i3.2 substate and suspend/resume is stable. enabling this for the regular Genesys Change-Id: I40fe05829783c7bce2a2c4c1520a4a7430642e26 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-20mb/google/volteer/variants: Enable RTD3 for the NVMe deviceDuncan Laurie
Enable Runtime D3 for the volteer variants that have GPIO power control of the NVMe device attached to PCIe Root Port 9. Enable the GPIO for power control for variants that do not already have it configured to allow the power to be disabled in D3 state. BUG=b:160996445 TEST=tested on delbin Change-Id: I6ebf813c6c3364fec2e489a9742f04452be92c45 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46262 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/common/acpi,mb/*: replace the two obsolete LPID with PEPDMichael Niewöhner
Replace the two obsolete LPID implementations with the new PEPD device. The PEPD device gets included in the plaforms' `southbridge.asl`, since it is required to load the `intel_pmc_core` module in Linux, which checks for the _HID. (See CB:46469 for more info on that.) There is no harm for mainboards not supporting S0ix, because the _DSM function won't be called with the LPS0 UUID on such boards. Such boards can use the debugging functionality of `intel_pmc_core`, too. Change-Id: Ic8427db33286451618b50ca429d41b604dbb08a5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46471 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19soc/intel/common/acpi: rename LPID to PEPDMichael Niewöhner
Rename LPID to PEPD for consistency. PEPD means "Power Engine Plug-In Device" and is the name Intel and vendors usually use, so let's comply. Change-Id: I1caa009a3946b1c55da8afbae058cafe98940c6d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46470 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19mb/google/zork: Set GPIO 86 high on bootMartin Roth
GPIO 86 should be set high on boot to save power. BUG=b:173340497 TEST=Build only BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I31ef1d2a1967d82ba5370462783a909417088d2f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-19mb/google/volteer/var/terrador: Correct enable_gpio to GPP_F16David Wu
The GPP_F16 is for enable_gpio after check the schematic. BUG=b:151978872 TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I63f43c231e624ed034ef18e8f06942ff3622d821 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-11-19mb/clevo/cml-u/l140cu: Extend Kconfig option text with L141CUFelix Singer
Extend the Kconfig option text of L140CU with L141CU since the hardware of both is equal. Change-Id: If0e5061fc345208688a678a4cdf7c5ecaf47c17d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-11-19mb/clevo/cml-u: Add comment to board selectionFelix Singer
Change-Id: I531865416b1bf9c5a73c809590059e7d7c8f373a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47715 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-18mb/google/volteer: Add new Audio option to FW_CONFIGWisley Chen
Volteer has a new Audio option in FW_CONFIG. This patch adds support for it and when enabled, programs GPIO pins for I2S functionality. BUG=b:171174991 TEST=emerge-volteer coreboot Change-Id: I85bc37980957a3fb6c795858a4e4f44f3e3cc332 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-18mb/google/hatch/var/ambassador: configure FSP option PcieRpSlotImplementedMatt Ziegelbaum
Ambassador is similar to puff. This change matches the PcieRpSlotImplemented configuration with Puff's, originally made for Puff in https://review.coreboot.org/c/coreboot/+/39986. Signed-off-by: Matt Ziegelbaum <ziegs@google.com> Change-Id: I5b6246f58c10e03a0d02278ad3621ded39bb6d6e Reviewed-on: https://review.coreboot.org/c/coreboot/+/47685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-18mb/google/hatch/var/ambassador: update fan table and tdp configMatt Ziegelbaum
Fan table: provided by the ODM (see attachment in bug) based on measurements with EVT unit. BUG=b:173134210 TEST=flash to DUT Change-Id: I9f727f0f7e2eb7fe70385ebc843558d51e1860c5 Signed-off-by: Matt Ziegelbaum <ziegs@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-18mb/intel/adlrvp: Update HPD1/2 GPIO as per latest schematicsSubrata Banik
HPD_1: A19 -> E14 HPD_2: A20 -> A18 Change-Id: Idf3c8f4931bf8364bb9216a9369df7e05dcde047 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-18mb/google/asurada: Configure pins mode for SDWenbin Mei
Configure the pins for SD to msdc1 mode and change the driving value to 8mA. Enable VCC and VCCQ power supply for SD. Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: I11151c659b251db987f797a6ae4a08a07971144b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-11-18mb/google/asurada: Implement enable_regulator and regulator_is_enabledYidi Lin
SD Card driver needs to access two regulators - MT6360_LDO5 and MT6360_LDO3. These two regulators are disabled by default. Two APIs are implemented: - mainboard_enable_regulator: Configure the regulator as enabled/disabled. - mainboard_regulator_is_enabled: Query if the regulator is enabled. BUG=b:168863056,b:147789962 BRANCH=none TEST=emerge-asurada coreboot Change-Id: I391f908fcb33ffdcccc53063644482eabc863ac4 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46687 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-18mb/google/asurada: Implement board-specific regulator controlsYidi Lin
Currently, five regulator controls are implemented for DRAM calibration and DVFS feature. The regulators for VCORE and VM18 are controlled by MT6359. The reguatlors for VDD1, VDD2 and VMDDR are controlled by MT6360 via EC. BUG=b:147789962 BRANCH=none TEST=verified with DRAM driver Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Id06a8196ca4badc51b06759afb07b5664278d13b Reviewed-on: https://review.coreboot.org/c/coreboot/+/46406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-11-18soc/mediatek/mt8192: add pmic MT6359P driverHsin-Hsiung Wang
MT6359P is a PMIC chipset for Mediatek MT8192 platform. Reference datasheet: MT6359_PMIC_Data_Sheet_V1.5.docx, RH-D-2018-0205. BUG=b:155253454 BRANCH=none TEST=boot asurada correctly Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: I62f69490165539847b8b7260942644533b15285b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45399 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-18mb/google/volteer: Update flashmap descriptor to add ME_RW_A/B regionJamie Ryu
The current CSE firmware update implementation adds CSE RW binary to FW_MAIN_A/B and this increases the boot time due to the size increase of these regions leading to higher loading and hashing time. To mitigate this issue, CSE RW binary is moved from FW_MAIN_A/B to new region, ME_RW_A/B under RW_SECTON_A/B, and this updates the flashmap to add ME_RW_A/B region for CSE RW binary. BUG=b:169077783 TEST=build with cse rw binary, flash and verify volteer2 boots to OS. Verify me_rw binary is added to ME_RW_A/B region. Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Change-Id: I87da3824933ed2dd8e8ed0fed8686d2a3527faea Reviewed-on: https://review.coreboot.org/c/coreboot/+/46431 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-18mb/intel/jasperlake_rvp: Modify flash layout and enable CSE RW updateV Sowmya
This patch modifies flash layout to add ME_RW_A/B to add the CSE RW blob and also enable the CSE RW update feature for JSLRVP BUG=b:169077783 TEST= Built for jslrvp. Verified that CSE RW and metadata files are included in cbfs. Change-Id: I13baa317a06d00cec0337f08754892c7c8737f5d Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-18mb/google/dedede: Modify flash layout to add ME_RW_A/B regionsV Sowmya
Existing implementation adds the CSE RW update binary to FW_MAIN_A/B regions and this has significant impact on boot time due to the increase in the size of these regions leading to higher loading and hashing time. This patch modifies flash layout to add new ME_RW_A/B fmap regions in the RW_SECTION_A/B. BUG=b:169077783 TEST= Built for dedede. Verified that CSE RW binary is added to the CSE_RW_A/B fmap region. Change-Id: I23a3e22a569488b39beb4d12f5b6309c7c742992 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-17mb/google/dedede/var/metaknight: Add touchscreen settingsTim Chen
Add Elan and Goodix touchscreen settings. BUG=b:169813211 BRANCH=None TEST=build metaknight firmware Change-Id: Ib2acd31a8076533c3b927d37127e7d27bac0bb57 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-17mb/google/zork: Power off fingerprint sensor on shutdownMartin Roth
When the system shuts down, turn the fingerprint sensor off. This sets the GPIOs correctly for the next boot. The fingerprint sensor was previously left on, and was just powering down when the rails went low. On suspend, the fingerprint sensor stays awake and puts itself in a low powerstate mode based on the SLP_Sx_L pin states. BUG=b:171837716 TEST=Fingerprint sensor still works after S3, GPIO state on the boot following a shutdown is low. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I3837b58372d8f4a504535e76bd21c667d68f8995 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47311 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-17src: Add missing 'include <console/console.h>'Elyes HAOUAS
"Die()" needs <console/console.h>. Change-Id: I250988d77b0b0a093a1d116bea44a0cbb84189dd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-17src: Add missing 'include <console/console.h>'Elyes HAOUAS
"printk()" needs <console/console.h>. Change-Id: Iac6b7000bcd8b1335fa3a0ba462a63aed2dc85b8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-17mb/google/reef/variants/: add Naya NT6AN256T32AV-J2James Chao
BUG=b:172843935 BRANCH=coral TEST=emerge-coral coreboot chromeos-bootimage Signed-off-by: James Chao <james_chao@asus.corp-partner.google.com> Change-Id: I70195acc33218d3ad4c77acfdbc8f6ed93ab144e Reviewed-on: https://review.coreboot.org/c/coreboot/+/47382 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-17mb/google/zork: Assume VBOOT_STARTS_BEFORE_BOOTBLOCKMartin Roth
At this point, the zork platform will only use psp_verstage, so remove the VBOOT_STARTS_IN_BOOTBLOCK option and set code for VBOOT_STARTS- BEFORE_BOOTBLOCK to always be used. TEST=Build & Boot Morphius BRANCH=Zork BUG=b:172848137 Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I30d90fe82c37966a860b52c07a3550dcecf8d19d Reviewed-on: https://review.coreboot.org/c/coreboot/+/47529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-17mb/google/volteer/variants/volteer2: Tune Volteer2 I2C2 bus frequencyJohnny Li
The current I2C2 bus frequency is 344 kHZ, which does not meet the spec. This change updates scl_lcnt, scl_hcnt, sda_hold value for I2C2 to bring the bus frequency closer to 400 kHz. BUG=b:153588771 TEST=Verified that I2C2 frequency is 380 kHz. Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com> Change-Id: I96fa5ed586de41324733ac7537b6bd73f39fc176 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47558 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-17mb/google/octopus/variants/bobba: Add G2Touch touchscreen supportSheng-Liang Pan
Add G2Touch touchscreen support for bobba. BUG=b:171636614, b:169730666 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage, and check touchscreen work. Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ia361a56c050d7cbd7325b3c09fc34d8707441cc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-16mb/google/hatch/dratini: Describe the privacy_gpioRicardo Ribalda
Add information regarding the privacy pin on the overridetree and gpio. BUG=b:172807539 Change-Id: Ic1bfa63e35a16d71a26adc3ec07b1ba36e6dc168 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47362 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16mb/supermicro/x11-lga1151-series: Initialize mem_cfg in one lineAngel Pons
Change-Id: I50390f66d9570eb0fd703e3ad8a2735125d76b61 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47566 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16dedede: Create lantis variantTony Huang
Create the lantis variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:171546871 BRANCH=dedede TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_LANTIS Change-Id: Ie3d15a687b870afc7d8bbeb6b5cab0792650da31 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-11-16mb/google/zork/: Enable REGULATORY_DOMAIN on VilbozEric Lai
WRDD table is needed for Intel WiFi module to enable SAR function. BUG=b:173066178 BRANCH=zork TEST=dump ACPI and check WRDD exist with Intel WiFi module. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9fd6fd19ed188f7ab91faab9e2599b9b09ca5b22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
2020-11-16volteer/variants/eldrid: Goodix touch panel power-on sequence tuningNick Chen
1. Enable panel stop GPIO in ramstage 2. generic.reset_delay_ms change to 30 BUG=b:171365316 Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I90ca39312252c668da6298183e598392bc9f9f28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-11-16mb/google/zork: Init fingerprint GPIOs for boot vs resumeMartin Roth
Add a function that initializes GPIOs based on the sleep type that the system is coming back from. This allows initialization of the fingerprint GPIOs which need to be handled differently between wake from S3 and boot from S5. On initial boot, the state of the FP sensor could be either enabled or disabled. Because of this, on boot, we power off the sensor for >200ms, to reset its state, then power it back on. In suspend/resume, the fingerprint sensor should remain powered the entire time. If fingerprint is disabled on the trembyle-based board, set the pins to no-connect. Dalboz doesn't have fingerprint and the GPIOS are configured differently due to the FT5 chip having fewer GPIOS than FP5, so nothing needs to be initialized there. There were also a couple of trivial comment clean ups regarding the FPMCU GPIOS. BUG=b:171837716 TEST=Boot & Check GPIO states. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I16a2e621145782e0a908bb3e49478586c09a0e0a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-16mb/google/volteer/var/voema: Add memory parts and generate DRAM IDsDavid Wu
This change adds memory parts used by variant voema to mem_parts_used.txt and generates DRAM IDs allocated to these parts. Added memory 1. H9HCNNNCRMBLPR-NEE 2. H9HCNNNFBMBLPR-NEE 3. MT53D1G64D4NW-046 WT:A BUG=b:172751925,b:172781673,b:172782100,b:172781562 TEST=emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ic832155448fb07152b906aa04ca49d384ec47b34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47351 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16mb/google/kukui: Fix LCD sequence T3 fail issueTao Xia
The T3 that PPVARN_LCD low to LCM_RST_1V8 high is 0.1269ms and it does not meet the LCD specification that the T3 must be larger than 5ms. Because there is a delay between PPVARN_LCD_EN and PPVARN_LCD. An extra 9ms delay should be added on LCM_RST_1V8 in order to meet the specification "ProductSpec_NV105WUM-A51_ V4.3_P2(TLCM).pdf". BUG=b:172201138 BRANCH=kukui TEST=The LCD sequence T3 is larger than 5ms when power on. Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: Iaf7ae494e30c4c207103d949287b335288688c54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
Currently the decision of whether or not to use mrc_cache in recovery mode is made within the individual platforms' drivers (ie: fsp2.0, fsp1.1, etc.). As this is not platform specific, but uses common vboot infrastructure, the code can be unified and moved into mrc_cache. The conditions are as follows: 1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain switch is true) 2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this means that memory training will occur after verified boot, meaning that mrc_cache will be filled with data from executing RW code. So in this case, we never want to use the training data in the mrc_cache for recovery mode. 3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this means that memory training happens before verfied boot, meaning that the mrc_cache data is generated by RO code, so it is safe to use for a recovery boot. 4. Any platform that does not use vboot should be unaffected. Additionally, we have removed the MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the mrc_cache driver takes care of invalidating the mrc_cache data for normal mode. If the platform: 1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data 2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set BUG=b:150502246 BRANCH=None TEST=1. run dut-control power_state:rec_force_mrc twice on lazor ensure that memory retraining happens both times run dut-control power_state:rec twice on lazor ensure that memory retraining happens only first time 2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig boot twice to ensure caching of memory training occurred on each boot. Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/google/volteer/variant/lindar: Update devicetree settingsStanley Wu
Update I2C address for Goodix touchscreen and add ELAN touchscreen & Synaptics trackpad device. Follow CB:47415 to correct HID over I2C device to be level triggerd. BUG=b:160013582 TEST=emerge-volteer coreboot and check system dmesg and evtest can get device. Change-Id: I070fb0e06b588f128253270502c9c2c427c62b84 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-13soc/intel/cnl: replace the remains of HeciEnabled by device state in dtMichael Niewöhner
The option `HeciEnabled` was partly replaced by use of the device on/off state in the devicetree in commit 3de90d1. The option has been removed from the corresponding boards, so `HeciEnabled` is always 0 and ME always gets disabled during soc finalize, when `HECI_DISABLE_USING_SMM` is set. Replace the option in the finalize function by the same dt state check that sets the FSP option and drop the remaints of `HeciEnabled`. Devicetrees still having `HeciEnabled` have been adapted to keep the current behaviour. Change-Id: Ib4cca9099b9aa3434552a41fbafca7cf6a0dd0eb Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47195 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/intel/adlrvp: Update WWAN GPIO as per latest schematicsSubrata Banik
WWAN_RST#: E10 -> F14 WWAN_PWR_EN: E13-> F21 Change-Id: I7182f384eb7a404dfe623c64e29467b41c6b0bdd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-13soc/intel/{skl,cnl}: replace PM ACPI timer dt option by KconfigMichael Niewöhner
Select `PM_ACPI_TIMER_OPTIONAL` to enable the new PM ACPI Kconfig and set the FSP option for PM ACPI timer enablement from its value instead of using the old devicetree option. Also drop the obsolete devicetree option from soc code and from the mainboards and add a corresponding Kconfig entry instead. Change-Id: I10724ccf1647594404cec15c2349ab05b6c9714f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45955 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/hp/folio_9480m: Update northbridge ACPI filenameAngel Pons
Fix build errors, since `haswell.asl` was dropped in commit 79e3a1f8a5 (nb/intel/haswell/acpi: Merge `haswell.asl` into `hostbridge.asl`) Change-Id: Iaec5de2d74dd81c58a581bb511ba6a63629141aa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47575 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/supermicro/x11-lga1151-series: Fix up comment styleAngel Pons
Change-Id: I5b6191d2b5f6fd6d127934eda56e3c24181b0c4c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47565 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/clevo/cml-u: Fix up comment styleAngel Pons
Change-Id: Idefc15fec1d62d68d88e91c76f59e1a60a3996b6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47564 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13broadwell: Flatten `acpi_init_gnvs` functionAngel Pons
Instead of relying on mainboards to call it, do like Lynx Point. Change-Id: Idb7457e0734e19d0a26f0762079e273b6e740475 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46793 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13broadwell: Factor out `acpi_fill_madt` functionAngel Pons
It is identical for all Broadwell mainboards, thus deduplicate it. Change-Id: I74559fbe42e44aa4d15ced5d88f6c15a1bf5203b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46792 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13nb/intel/haswell/acpi: Merge `haswell.asl` into `hostbridge.asl`Angel Pons
Tested with BUILD_TIMELESS=1, Google Wolf remains identical. Change-Id: I710581156937b042ba4cf5948c65d0795ad37bbf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46789 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell/acpi: Rename `systemagent.asl`Angel Pons
Rename it to `hostbridge.asl`, which is what Haswell uses. Change-Id: I6f97fc5c9459fe6b66dcfcf51900c751beda0ebe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46786 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/google/reef: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ifc6dd5f6549e7501f350afe8456a9a8096edcc25 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/poppy: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ida1b1d05b39e67a9eba3bfaecca37f38821a438b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/kahlee: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ib2f203b5f5eea5c25cfd4543f5ed9f15101b1735 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/octopus: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ic334816712370da63471135da8dd598ab02d54ef Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/zork: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: I75a92616f11054993ff5a5bfefce5c3f4638c07c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/drallion: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Iff00667377eecedcf0b83bcfc0bf50bd4c3411eb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/deltaur: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: I1773973f64bcc5ef6bd1856c5d8eb998bb6a4888 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/hatch: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: I320198d56131cf54e0f73227479f69968719b2a7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/volteer: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ie7b82ea07ef97b2096d75229c445bd3a65cb3be0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/dedede: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=emerge-dedede coreboot Change-Id: I9d8fa57ae0f554896a4a0722e3e89567676382d4 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/dedede/var/metaknight: enable USB2 port for cameraTim Chen
Enable USB2 port 5 for user facing camera. Enable USB2 port 6 for world facing camera. BUG=b:169813211 BRANCH=None TEST=build metaknight firmware Change-Id: Iecb7787d46eab7096dec9f838a16da101105e09a Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-13mb/google/dedede/var/metaknight: Disable I2C port 3Tim Chen
Disable I2C port 3 for metaknight BUG=b:169813211 BRANCH=None TEST=build metaknight firmware Change-Id: Ic4a056d53a8c8abd04a9b786428da0986a255276 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-12mb/amd/mandolin/Kconfig: update help text for AMD_LPC_DEBUG_CARDFelix Held
The existing help text wasn't updated for Mandolin after it was copied from an older reference board and contained some information that doesn't apply to Mandolin. Change-Id: Ib34abb2ee8b289df5f7085957042fe00ad506ca9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-12mb/amd/mandolin/Kconfig: add help text for the EC blobFelix Held
Change-Id: If8d3ebdb9a41330312c26fb5796c07de1b87b3eb Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47480 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>