summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2012-10-08hpet: common ACPI generationPatrick Georgi
HPET's min ticks (minimum time between events to avoid losing interrupts) is chipset specific, so move it to Kconfig. Via also has a special base address, so move it as well. Apart from these (and the base address was already #defined), the table is very uniform. Change-Id: I848a2e2b0b16021c7ee5ba99097fa6a5886c3286 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1562 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2012-10-07Remove chip.h files without config structureKyösti Mälkki
Also deletes files not included in build: src/southbridge/amd/cimx/sb700/chip_name.c src/southbridge/amd/cimx/sb800/chip_name.c src/southbridge/amd/cimx/sb900/chip_name.c Change-Id: I2068e3859157b758ccea0ca91fa47d09a8639361 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1473 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-05Mainboard: Fix IO-HUB link number in Dinar mainboardKostr
According to file "northbridge.c" in family 15h code IO-HUB should be placed on link_lsit[0] in devicetree.cb. This hack in "northbridge.c" was made to satisfy both f10 and f15 cpu's. Change-Id: I4754235bd38239460347b0dc4a82cd4e58ae7cd0 Signed-off-by: Kostr <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/1540 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-05Use mainboard_interrupt_handlers everywherePatrick Georgi
The previous commit provides a mainboard_interrupt_handlers implementation YABEL with identical semantics to the x86emu one, so let's use it in both cases. This eliminates the need for the int15_install() indirection, so let's drop that, too. Generated using the following coccinelle patch and manual cleanups (empty #if/#endif): @@ type T; identifier FUNCARR; expression INT, HANDLER; @@ -typedef T yabel_handleIntFunc; -extern yabel_handleIntFunc FUNCARR[256]; -FUNCARR[INT] = HANDLER; +mainboard_interrupt_handlers(INT, &HANDLER); @@ @@ -void int15_install(void) -{ -mainboard_interrupt_handlers(0x15, &int15_handler); -} @@ @@ -void int15_install(void) -{ -mainboard_interrupt_handlers(0x15, &int15_handler); ... mainboard_interrupt_handlers(0x15, &int15_handler); -} @@ @@ -int15_install(); +mainboard_interrupt_handlers(0x15, &int15_handler); Change-Id: I70fd780d7ebf1564a2ff7d7148411673f6de113c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1559 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-04add tyan s8226: add a new mainboardSiyuan Wang
our code supports tyan s8226 now, which has two cpus on the board the cpu socket is C32. The details of tyan s8226 is: http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=679&SKU=600000190 the test result of this mainboard is: 1) boot Ubunbu 11.10, kernel 3.0.9. there is no err and warnings in dmesg. 2) boot windows7 x64 successfully. 3) use fwts to test the bios, there are 268 pass and 14 failed 4) pcie and usb slots are ok. 5) all network interfaces are ok. Change-Id: I7d8534f20b4f3c16322a5c5ba2e3fba4b4f3e608 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1495 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-09-19C32 legacy code: change CONFIG_CPU_AMD_SOCKET_C32 to ↵Siyuan Wang
CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA Currently the C32 has some legacy boards which use the old C32 code. We need to seperate them. CONFIG_CPU_AMD_SOCKET_C32 was used in legacy code before. But it is not a good idea, so we change the code as follows: So we use CONFIG_CPU_AMD_SOCKET_C32 to identify mainboard which uses agesa code, and use CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA to identify mainboard which uses legacy code. Change-Id: If6114bf8912e78b7732f25a1adfb2e4d8eb10ee4 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1497 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-09-17Set SMBIOS mainboard version based on i2c eepromChristian Gmeiner
In the field there are different hardware revisions and some of them have problems with UDMA as a resistor is missing. We can detect this situation in coreboot and e.g. the linux kernel can take this knowledge and disable UDMA. Change-Id: Ib75cad7acedbc1dc65378bb9bfc3f353cbe21427 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1512 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-09-17Add i2c eeprom to device treeChristian Gmeiner
This eeprom is used to store some device relevant informations like hardware revision. Change-Id: I32bda9d5412bc5a96da0edb5ef0b6d1ba4caa2d8 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1511 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-09-13Mahogany_Fam10: Fixes an apparent ACPI VGA resource collision.Dave Frodin
Without this change 64 bit versions of Windows will BSOD. Change-Id: If39627a179c24184b6c956b3a50f692f8a034d2f Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1476 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-09-12Fix VT8237S USB IRQ routingRudolf Marek
The M2V-MX SE DSDT has been a copy from Asus A8V-E SE, which has VT8237R. But the stuble change in USB interrupt routing went undetected, although I had some USB troubles on the FOSDEM with low speed devices. Change-Id: Ie724df440e0963f6955b3de57e4687f3ddc7f6ef Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/1505 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-09-06IEI/KINO: Fixes an apparent ACPI VGA resource collision.Dave Frodin
Without this change 64 bit versions of Windows will BSOD. Change-Id: Ica4b79d798a269399341868b1c793ce745aa93fc Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1480 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-08-25Fix mptable build troublesKyösti Mälkki
A missing mptable.c file got passed jenkins, got merged and broke the build. Hopefully finally fix this. Deletes unused files: src/mainboard/asus/dsbf/mptable.c src/mainboard/supermicro/x7db8/mptable.c Change-Id: Ie81f5a6c4c69ab381f86a243bc8874395e69ee26 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1486 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-22LUMPY: Add information to generate MPTABLE from devicetree.cbSven Schnelle
Change-Id: If68888e87c5197328c59dafce1301eefe000e28e Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1462 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-22Auto-declare chip_operationsKyösti Mälkki
The name is derived directly from the device path. Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-08Cleanup coreboot memory table includesKyösti Mälkki
The includes removed here were previously required for struct lb_memory and lb_add_memory_range(). Change-Id: Ie6c0d4ef55c2225aa709cf3fbad30ff1080e3610 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1391 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-08-08Drop HAVE_MAINBOARD_RESOURCESKyösti Mälkki
These existed to provide a hook to add reserved memory regions in the coreboot memory table. Reserved memory are now added as resources. Change-Id: I9f83df33845cfa6973b018a51cf9444dbf0f8667 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1414 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-07Siemens SiteMP: drop add_mainboard_resources()Kyösti Mälkki
Use of lb_add_memory_region() is reduntant with the MMCONF resource being set as reserved. Change-Id: I747ea34823692b6966b2e50d22aea1fb89c73c25 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1394 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-07Move cpus_ready_for_init() to AMD K8Kyösti Mälkki
The function is a noop for all but amd/serengeti_cheetah. Change-Id: I09e2e710aa964c2f31e35fcea4f14856cc1e1dca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1184 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-07bd82x6x: Add beep commandsDylan Reid
Move beep commands to board-specific area as they need to be different for different codecs. Change-Id: I2a1ac938c49827cc816a95df10793a7e234942bf Signed-off-by: Dylan Reid <dgreid@chromium.org> Reviewed-on: http://review.coreboot.org/1410 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-05Technexion TIM5690: drop add_mainboard_resources()Kyösti Mälkki
Move the POST display to take place just before jumping the payload, a bit later than before. Change-Id: Ie1d1ff24dc6c1640e25681be7dc5740943c7f112 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1396 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-04AMD Thatcher: Add BIOS callback hook for getting VBIOS Imagezbao
Apply the change http://review.coreboot.org/1351 to thatcher. Change-Id: I33e7ad0cad2ae06f5934c60939d60a18444aa24e Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1407 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-04AMD Parmer: Remove warning.zbao
Change-Id: I4ba2d480fa6df5ee741d887d26524b32c1901d73 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1399 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-03VIA Epia-N: drop add_mainboard_resources()Kyösti Mälkki
The board had HAVE_MAINBOARD_RESOURCES=0 so this was never called. Drop unnecessary includes too. Change-Id: Ia7bddf29a16966c052b5cabbb47029299e6dbd12 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1392 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-03Fix mainboard level enable_dev()Kyösti Mälkki
Commit 188e3c2ff06a82f61d7d71e610b32b1a250c0a45 dropped mainboard out of the static device tree. This left dev_root->chip_ops unset, and mainboard_ops.enable_dev() was no longer called. Change-Id: I6d447c8049a66041b8bb36ec9aac3e7e0d20a99b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1374 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-08-02AMD Thatcher Board based on trinityzbao
Thatcher features: Family 15 trinity FP2. Hudson. close to Parmer. This board and parmer both need to revert the change http://review.coreboot.org/#/c/1359/, and add thatcher's own chip.h,otherwise the mainboard_enable can not be called. Change-Id: I54e1cfca845fbcea1d3aad5eff08d760d0d215c9 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1382 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-02AMD and GFXUMA: move setup_uma_memory() to northbridgeKyösti Mälkki
UMA region can be determined at any time after the amount of RAM is known and before the uma_resource() call. Change-Id: I2a0bf2d3cad55ee70e889c88846f962b7faa0c7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1379 Reviewed-by: Zheng Bao <zheng.bao@amd.com> Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-01AMD and GFXUMA : drop redundant use of lb_add_memory_range()Kyösti Mälkki
See commit 505414a6cfb2aeef455b5144e4b96fc27f19eb39. Change-Id: Icc04af9726ae54141581aecc84c40e8aac54591d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1378 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-01Intel and GFXUMA: drop redundant use of lb_add_memory_range()Kyösti Mälkki
Use of uma_resource() in northbridge code created a memory resource marked as reserved. Such resources are removed from system memory in write_coreboot_table(). Change-Id: I14bfd560140d8d30ec156562f23072bfae747bde Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1238 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-31Revert "remove CONFIG_SERIAL_CPU_INIT"Sven Schnelle
This reverts commit 78efc4c36c68b51b3e73acdb721a12ec23ed0369. The broadcast patch was reverted, so this commit should also be reverted. The reason for reverting the broadcast patch: It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I05c27dec55fa681f455215be56dcbc5f22808193 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1380 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26amd/lx: Move configuration from source to KconfigPatrick Georgi
LX has two values that are usually automatically derived but can be overridden, that were so far defined in each board's romstage. These values, along with the toggle to enable override are now part of LX's Kconfig. For boards that gave values but requested autogeneration, the values are removed. Further improvements: Figure out the various fields in PLLMSRlo and make them sensible Kconfig options (instead of the hex value it is now) Change-Id: I8a17c89e4a3cb1b52aaceef645955ab7817b482d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1227 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-26Add correct bios callout into read event routinezbao
Read event routine didn't get the correct BIOS callout. So it could not get the heap address. Then it would creat many warning in serial port. Change-Id: Ia35601bda1579c7f726ed767d7be78713ac185d2 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1266 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-26ibase/mb899: Rename NIC BIOS disable driver and hook upPatrick Georgi
The board has a marvell NIC, but the driver to disable NIC BIOS was adapted from a Realtek 8168 driver. Rename to reflect the change. Also hook up as driver, so coreboot can actually find it. Change-Id: Ibdfd6074eb28ba537d68552a3346b06493cef2a6 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1355 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-26Remove copies of rtl8168.cPatrick Georgi
One copy was slightly different, but all the differences were commented out Change-Id: I3cc7b5621c681a1eb286f9b16ef3ebdce03abb6b Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1356 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-25AMD parmer: Set correct azalia code verb tablezbao
Change-Id: I0b10080deb971cdefa4d3916fabd40f5a81b11f4 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1352 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25AMD family15tn: Add BIOS callback hook for getting VBIOS Imagezbao
This is for GfxInitSview(GnbSview.c). It would create warning message if it could not get VBIOS image. Change-Id: I3b2726f612b4b7a237644a4b63b56efad52b7ab5 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1351 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25AMD Family15tn: Set the mask of MTRR to 0000FFFXX0000800zbao
Remove the warning message from linux dmesg, mtrr: your BIOS has configured as incorrect mask, fixing it. Change-Id: I355509db12ab10c33b7c1c23e2c7c4783f30e67e Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1349 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25sync the northbridge.c with other family.zbao
Change-Id: Ice4d0202590fca0169dcda2770ca6add166b5c13 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1262 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24ChromeOS: Remove board specific acpi_get_vdat_info()Stefan Reinauer
The function acpi_get_vdat_info() was moved to the ChromeOS vendor code, and is no longer required to be present for each board. Hence, remove it. Change-Id: I3dc8dbb6119ceffa057373bad7c0058ac0d40eb8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1283 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Drop (empty) sandybridge_late_initialization()Stefan Reinauer
The function is empty (a left-over from i945) and should be removed. Change-Id: I91e573b5e37cb9133ea1037aef7e6daf3c292864 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1290 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Remove CMOS Extended range enable from romstageDuncan Laurie
This enable step has been moved to the bd82x6x bootblock. For Samsung Stumpy and Lumpy mainboards and the Intel EmeraldLake2 reference board. Change-Id: I5ce54f57b8e1dd732c8a5ae71d7511703de91a0e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1307 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24Move GGL0001 ACPI code to generic ChromeOS codeStefan Reinauer
The only difference in this code on all our platforms is the array describing the GPIOs. Hence, only keep that array in the mainboard ChromeOS directory and move everything else to generic ChromeOS ACPI code. Change-Id: I9fc75842af64530c1255bea1c5f803c5316d6da6 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1278 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-23AMD and GFXUMA: drop redundant use of lb_add_memory_range()Kyösti Mälkki
Use of uma_resource() in AMD northbridge code created a memory resource marked as reserved. Such resources are removed from system memory in write_coreboot_table(). Change-Id: Ib5e49e851d6622d8ece9d6d612e245b3962b9167 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1233 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-07-22Mainboard Parmer based on Trinityzbao
Parmer has. 1. Trinity, Socket FS1R2. 2. Hudson A75. Ubuntu has been validated on Parmer. S3 is supported. Change-Id: I1a6932d0ca9f7abe78dc24d3bc238a4b5a48281b Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1158 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-19Add missing quote.zbao
Remove the menuconfig warning which comes up every time. src/mainboard/asus/Kconfig:85:warning: multi-line strings not supported Change-Id: I0ec0a0b625a33edd1d9b250a26aa3e0f42142eca Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1240 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Move setup_uma_memory() to K8 northbridgeKyösti Mälkki
These boards had identical UMA code: amd/dbm690t amd/pistachio technexion/tim5690 technexion/tim8690 The ones below had whitespace or debug level change compared to the one above: kontron/kt690 siemens/sitemp_g1p1 These boards use AMDFAM10 guidelines in code: asrock/939a785gmh amd/mahogany Change-Id: Id7c3f48035727f5847f2d7c3a6e87a3d15582003 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1210 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Move setup_uma_memory() to AMDFAM10 northbridgeKyösti Mälkki
Following boards had identical code: advansus/a785e-i amd/bimini_fam10 amd/mahogany_fam10 asus/m5a88-v avalue/eax-785e gigabyte/ma78gm iei/kino-780am2-fam10 jetway/pa78vm5 Following boards had identical code: amd/tilapia_fam10 asus/m4a78-em asus/m4a785-m gigabyte/ma785gm gigabyte/ma785gmt In between the two, only whitespace difference. Change-Id: Iaa48cc7b0038ebcc81be49219b4fc87670aa9941 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1209 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Move setup_uma_memory() to Agesa Family14 northbridgeKyösti Mälkki
Following boards had identical code: amd/inagua amd/persimmon The following had only whitespace or debug level changes compared to ones above. amd/union_station amd/south_station asrock/e350m1 Change-Id: I11ee46e06e1dd510cba551166189ebcaa144464b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1208 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Move setup_uma_memory() to Agesa Family12 northbridgeKyösti Mälkki
Change-Id: Ieaf284c207f0cd4b2f6b804c52f949c16435d823 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1207 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Move setup_uma_memory() to Agesa Family15 northbridgeKyösti Mälkki
Change-Id: I5705623f5067823fae5986b3bcde58504a463508 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1206 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Define global uma_memory variablesKyösti Mälkki
Use of the uma_memory_base and _size variables is very scattered. Implementation of setup_uma_memory() will appear in each northbridge. It should be possible to do this setup entirely in northbridge code and get rid of the globals in a follow-up. Change-Id: I07ccd98c55a6bcaa8294ad9704b88d7afb341456 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-14Add ASUS DSBF mainboardSven Schnelle
Change-Id: Iad38b92ca3a582e5aec07b92c994bfbe78b09855 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1223 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-14Supermicro X7DB8: Use autogeneration of mptableSven Schnelle
And fix the wrong indenting of devicetree.cb while at it. Change-Id: Idbb19fb5d7155f44675098e79920caf65191c239 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1222 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-13Add preliminary support for Bachmann electronic OT200Christian Gmeiner
Linux boots fine :) Change-Id: Ifda06e5220666534b87f528deae16d8b956c32b3 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1225 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-12Drop Kconfig VAR_MTRR_HOLE optionKyösti Mälkki
All but one board use the default value of enabled. Disabling this can only increase the number of MTRR registers used. Change-Id: I7d28adc31b9fae2301e4ff78fcb96486f81d5ec2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1213 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-12Lenovo X60: correct SDHCI write protect polarityJonathan A. Kollasch
Change-Id: I916deffe2c692042f7e54c936902e77770ee69df Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/1205 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-07IEI PM-LX-800-R11: Removed bogus Kconfig optionRicardo Martins
The Kconfig file for this board contains a bogus option called CORE_GLIU, this change removes it. Change-Id: I4ea069bdd76be53085ebc9c0fb3dd71ffb2a12e1 Signed-off-by: Ricardo Martins <rasmartins@gmail.com> Reviewed-on: http://review.coreboot.org/1179 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-07-06IEI PM-LX-800-R11: Added preliminary mainboard supportRicardo Martins
Details for this board are available at http://www.ieiworld.com/product_groups/industrial/content.aspx?gid=00001000010000000001&cid=09050665574743104681&id=08142307826854456110 Most of the functionality provided by the original BIOS is implemented. Change-Id: Id9eb10a2f9e49377ea587bddadbba7d76223a715 Signed-off-by: Ricardo Martins <rasmartins@gmail.com> Reviewed-on: http://review.coreboot.org/1168 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-04Supermicro X7DB8: add w83793 Hardware monitorSven Schnelle
used for fan control and thermal management on that board. Change-Id: I4e5c986ab6174b7a356d682e21732c46181af211 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1167 Tested-by: build bot (Jenkins)
2012-07-03SMBIOS: move serial number and version out to KconfChristian Gmeiner
With this change it is possible to define serial number and version of the mainboard. These informations are used in SMBIOS tables. Change-Id: I1634882270f6cb94e00aceb7832e7fd14adc186b Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1163 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-02remove CONFIG_SERIAL_CPU_INITSven Schnelle
The new broadcast code doesn't support serial init - if a CPU needs serial init, this should be handled in the model specific CPU init code. Change-Id: I7cafb0af10d712366819ad0849f9b93558e9d46a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1140 Tested-by: build bot (Jenkins)
2012-06-24X60/T60: fix mptable LINT entriesSven Schnelle
They used MP_IRQ_TRIGGER_LEVEL, but it should be MP_IRQ_TRIGGER_EDGE. While at it, uses mptable_lintsrc() instead. Change-Id: Ie71311b8bf865889cf0d8808467df98af4b0132d Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1136 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-23Add Supermicro X7DB8 motherboardSven Schnelle
This adds basic supported for the Supermicro X7DB8. Basic means that almost all onboard peripherals are working. Known problems are: - mptable needs to be written dynamically. If you plan to use Add on cards, modify mptable.c according to your needs. A patch to add generic mptable autogeneration based on devicetree is coming up. Change-Id: I5eaac32a8bafa69a05929cf08d869127b9464661 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/493 Tested-by: build bot (Jenkins)
2012-06-12Update SB800 CIMX FADTMartin Roth
- Add #define to allow the FADT PM Profile to be overridden. - Change the location of the PMA_CNT_BLOCK_ADDRESS to match current documentation. - cst_cnt should be 0 if smi_cmd == 0 - add a couple of default access sizes. - Add a couple of #define values for unsupported C2 & C3 entries. - Add PM Profile override value into amd/persimmon platform. This does not use the #defines in acpi.h so that the files that include this don't all need to start including acpi.h. Change-Id: Ib11ef8f9346d42fcf653fae6e2752d62a40a3094 Signed-off-by: Martin L Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1055 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-06-01Enable CONFIG_GFXUMA for roda/rk886exNico Huber
Without GFXUMA beeing set, MTRR initialization runs out of variable MTRRs. Change-Id: I5d1aa0d5fa2d72f17a0d88cae3fad880b489828c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1086 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-28Enable USE_OPTION_TABLE for ThinkPad X60Motiejus Jakštys
Without this option bluetooth configuration value in nvram is not consulted properly. It also enables built-in volume control (read-only). Tested on: ThinkPad X60s, 1702. Change-Id: I2fc6bb527c6e086a083e63922d1253eda7d4a36d Signed-off-by: Motiejus Jakštys <desired.mta@gmail.com> Reviewed-on: http://review.coreboot.org/985 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-05-26Move subsystem IDs to devicetree.cbStefan Reinauer
A while back coreboot was changed to read the subsystem IDs from devicetree.cb to allow each onboard PCI device to have its own subsystem id. When we originally branched, this was not the case, and the sandybridge/ivybridge mainboards have not been updated yet. Also, drop the subsystem ID from Emerald Lake 2, since it's not a Google device. Change-Id: Ie96fd67cd2ff65ad6ff725914e3bad843e78712e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1042 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-25Fix typo on Persimmon #if CONFIG_HAVE_ACPI_RESUMEMarc Jones
Stupid typo: APCI instead of ACPI in Persimmon. Change-Id: I6fd7f091cf1f5c4c0e1b57c21553dab93b545eab Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1054 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-05-24cbtypes.h: Unify cbtypes.h used in AMD board's codeVikram Narayanan
Remove all the repeated sections of code in cbtypes.h and place it in a common location. Add include dir in vendor code's Makefile. Change-Id: Ida92c2a7a88e9520b84b0dcbbf37cd5c9f63f798 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/912 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-05-21Fix Persimmon build without S3.Marc Jones
In the heap function, only check for S3 check when it is built in with CONFIG_HAVE_ACPI_RESUME. Change-Id: I439275a4e1b7b446b499bcf90c925785a14b980d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1034 Tested-by: build bot (Jenkins) Reviewed-by: Steve Goodrich <steve.goodrich@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-05-12Merge sb800 fadt fixes from South Station mainboard to southbridge fadt.Marc Jones
The South Station recieved updates that fix a number of fadt problems. South Station now uses the southbridge fadt. Change-Id: Ib990a69a359a4b7eae3431bb4323acd537acda1d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1021 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-10Unmark source files as executablesAlec Ari
Change source file modes from 755 to 644 The following files have been grepped for changes: *.c *.h *Kconfig* *Makefile* Change-Id: I275f42ac7c4df894380d0492bca65c16a057376c Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/1023 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-10Integrate MA785GM-US2H to KconfigAlec Ari
MA785GM-US2H was left out of Kconfig. This allows the option to select the board. Change-Id: I9efea96c21dcd0754ab51824b410435b0b5300c2 Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/1022 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-09Move fadt.c to the cimx sb800 southbridge directory to be shared.Marc Jones
The fadt.c is the same across all the platforms using the sb800 cimx southbridge wrapper. Change-Id: Ifbbfc238732aa46aef96297eaa188b77d27151f3 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1019 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-05-04siemens/sitemp_g1p1: Drop debug codePatrick Georgi
Change-Id: I40a4201b468131ba67e48ab68d62ca5413f2e2e8 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1000 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-05-04roda/rk886ex: Expose VGA devices in devicetreePatrick Georgi
Otherwise set_subsystem isn't called for these (as they're not marked on_mainboard) Change-Id: I08e781735c59e4aa61009d2afa165d782f5a849e Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/998 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-03Don't pre-enable SATA AHCI in romstage.cStefan Reinauer
In a recent commit the SATA code of Panther Point / Cougar Point was changed to enable AHCI mode depending on the device tree settings rather than a hard code hidden in romstage.c. However, Emerald Lake 2 was not fixed up accordingly. Change-Id: I6c93f386509361e1ab5565b0e4d0e84f0ba282a2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/995 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-02ChromeOS: drop unused debug header descriptionStefan Reinauer
No part of ChromeOS seems to use the debug header description, so drop it to make sure it does not get copied around wrongly. Change-Id: Icb0baedbf6112f11289b2ddd9618a955a424ddf7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/989 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-05-01Drop CONFIG_MAX_PHYSICAL_CPUS on non-AMD boardsStefan Reinauer
CONFIG_MAX_PHYSICAL_CPUS is defined by quite a number of mainboards whithout any code actually using the variable. Hence, drop MAX_PHYSICAL_CPUS from Kconfig for those boards. In the long run we should drop CONFIG_MAX_PHYSICAL_CPUS use completely and make the code dynamic or depend on CONFIG_MAX_CPUS instead. Change-Id: I37dcc74d245ddba5186b96bd82220dacb6f4d323 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/984 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-01Clean up Emerald Lake 2 mainboard directoryGabe Black
Change-Id: I4a64a56dda22050a31232807096e15565a665377 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/967 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-01Allow more CPU cores on Emerald Lake 2 CRBStefan Reinauer
The Emerald Lake 2 CRB can potentially have more than 8 CPU cores, so update the number of max cores accordingly. Change-Id: Ia42ed8a84916f66dfbfdf2a72cbbed5cea61899b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/966 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-01Set up ChromeOS dev mode, recovery, and write protect GPIOs on Emerald Lake 2.Gabe Black
The Emerald Lake 2 CRB wasn't designed with ChromeOS in mind, so there aren't any actual developer mode, recovery mode, or write protect switches, let alone GPIOs to read them from. Instead, I've commandeered signals connected to GPIOs which are for other things but which aren't used by hardware or, for instance, the EC to do something Coreboot doesn't control. The recovery mode switch is connected to GPIO 22 and is called BIOS_REC on the schematic. The name is at least very reminiscent of the right thing even if it's supposed to be used for something else. There's a jumper on the board labelled J8G1 which can force the line to ground, and if not, there's a switch on the front of the case which toggles its value. "RECOVER" is for recovery mode and "KEEP" is for normal mode. The developer mode switch is connected to GPIO 57 and is called SV_DET on the schematic. It's connected to a jumper labelled J8E2 on the board and, as far as I can tell, can't be controlled in any other way. When the jumper is in place and the pins are shorted, developer mode is selected. When the jumper is removed, normal mode is selected. The write protect is connected to GPIO 48 which is called BIOS_RESP on the schematic. It's connected to a jumper labelled J8E3 which, like j8E2, seems to be the only way to control the line it's on. When the jumper is in place, write protect is "disabled", and when it's in place it's "enabled" even though there's no functional difference. The input for the recovery mode switch was chosen because of the name it already had on the CRB, BIOS recovery, and because there's a switch to control it on the front of the case which makes it easy to get at. The jumpers for developer mode and recovery mode were chosen because there weren't very many options available, and of those these were next to each other which should make them easier to find and work with. It might be a good idea to wire toggle switches up to the pins of those jumpers so they'll be easy to identify, can be labelled, and would be easier to work with than little jumpers in the middle of the motherboard. Change-Id: Ib2c3dc05077dacfbede596dae143ed81a99dbebd Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/965 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-01Fix Sandybridge/Ivybridge mainboards according to code reviewStefan Reinauer
This fixes a few cosmetics with the following three boards: - Intel Emerald Lake 2 - Samsung ChromeBook - Samsung ChromeBox The following issues were fixed: - rely on include path in ASL code instead of specifying relative paths - use updated ALIGN_CURRENT in acpi_tables.c - use preprocessor defines instead of hard coded values where possible Change-Id: Ia5941be3873aa84c30c13ff2f0428d1c52daa563 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/963 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2012-05-01Set up the Emerald Lake 2 SMI and SCI sources based on the schematic.Gabe Black
This sets up the SMI and SCI inputs on the PCH for Emerald Lake 2 based on my best interpretation of the schematic. It may not be correct, but it doesn't seem to cause any problems either. Change-Id: I21238b3853a92893ec7f08baa2a3ebd35c49dd97 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-30Add support for Sandybridge base Samsung ChromeBoxStefan Reinauer
Change-Id: Ic93ad2749834c8f7a2ca1651d343561f2a496312 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/953 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-30Add support for Sandybridge based Samsung ChromeBookStefan Reinauer
Change-Id: I8bf439bc903c1ec105016866753c7cb9ccfe5974 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/952 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-30Add support for Intel Emerald Lake 2 CRBStefan Reinauer
This adds support for Intel's Emerald Lake 2 board. Change-Id: Ifaeeac9d52fe655324ee29df5f7187b89b35f73a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/951 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-30Rework ACPI CST table generationStefan Reinauer
... in order to unify the Sandybridge and Lenovo implementations currently used in the tree. - use acpi_addr_t in acpigen_write_register() - use acpi_cstate_t for cstate tables (and fix up the x60 and t60) - drop cst_entry from acpigen.h Change-Id: Icb87418d44d355f607c4a67300107b40f40b3b3f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/943 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2012-04-29Update amd/south_station/fadt.c with various fixesMartin Roth
This is a model fadt.c that I would like to use for updating several other AMD platforms with after acceptance. - Updated to match ACPI 3.0b specification and added comments to reflect that. - Since smi_cmd is 0, remove commands that rely on it: acpi_enable, acpi_disable, & pstate_cnt Add comments to that effect. - Changed preferred_pm_profile to SOHO Server (platform specific) - The southstation platform is legacy free - Updated iapc_boot_arch and flags to reflect that. - Added reset_register flag so that operating systems will actually use the reset_reg. This is important on legacy free systems. - Updated Generic Address Structures to use access_size name in the updated acpi.h. Added access sizes to the structures where reasonable. - Removed 64-bit x_firmware_ctl pointer to facs. This was causing a fwts failure and windows-64 BSOD. - Added bit width for pm2_cnt_blk and modified gpe0_blk bit to match the hardware. Change-Id: Icf1a982aa122636d1088c8b80f53d04732b54c49 Signed-off-by: Martin L Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/942 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-04-27SMM: unify mainboard APM command handlersStefan Reinauer
rename from mainboard_apm_cnt to mainboard_smi_apmc to match the function naming scheme of the other handlers. Add prototype for mainboard_smi_sleep (mainboard specific S3 sleep handlers in SMM) that is required by Sandybridge. Change-Id: Ib479397e460e33772d90d9d41dba267e4e7e3008 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/933 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-27Move top level pc80 directory to drivers/Stefan Reinauer
There is no reason for this to be a top level directory. Some stuff from lib/ should also be moved to drivers/ Change-Id: I3c2d2e127f7215eadead029cfc7442c22b26814a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/939 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-25ASUS M4A785T-M mainboard: fix screen flickering issuesDenis 'GNUtoo' Carikli
Without that fix the screen flickered with resolutions superior to 832x624 because the cpu_ht_freq was 0 (so it ran at 200Mhz). Change-Id: I1056d76b1d77f6177594ed9d03ecc5ae7b3c2c13 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/900 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-24rk886: Add ACPI support for LID switchPatrick Georgi
Change-Id: Ib5a34491531228db9a9232322bd573fded27ee67 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/924 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-24Fix whitespace for ma785gmAlec Ari
Fix tabs and whitespace for ma785gm mainboard.c file. Change-Id: I8c94bf428bc4e78871da8c64f89221af4151e16d Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/923 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-24Update MA785GM codeAlec Ari
This commit adds the following to MA785GM: Refactor some alignment handling Unify Local APIC address definitions ACPI: More ../../.. removal Remove old AMD fam10 fixme comment amd/sb700: Move HAVE_HARD_RESET to southbridge Change-Id: I85a95bb641375dd61d1f58a2f2f972771d1d9ad9 Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/922 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-24Intel 82801dx: compile early_smbus as separate objectKyösti Mälkki
Add early_smbus.c for romstage-y list and remove respective include on mainboard romstage.c files. Tested on AOpen board. Change-Id: I1c7e6cb32e3a9d7cc9b6037dc27e59149d492001 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/909 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-23Add support for MA785GM-US2HAlec Ari
This patch adds coreboot support for the GIGABYTE MA785GM-US2H board. This port now removes all dead code in the previous patch set, and also boots Fedora 16 on x86_64 (Phenom II X4 955 BE) On-board audio causes spurious interrupts and the kernel gets stuck in an infinite loop. AtomBIOS on RadeonHD video cards does not function and causes another infinite loop. radeon.modeset=0 must be set. acpi=off must also be set. With those kernel command line options set, Fedora 16 makes it to the login screen. USB mouse and keyboard don't work though. several USB error codes on boot-up. PS/2 should. Change-Id: I58a7083a023ebf7373b6ded2e9f0adda7ab76dea Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/476 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-23alix2: add support for alix6Philip Prindeville
The Alix6 is very similar to the alix2, differing in having 1 mini-PCIe slot (USB 2.0 only), an RFKILL GPIO line going to that slot, and 1 or 2 SIM sockets. Change-Id: I19e4e756966e60bb0310c19286654d3d579b8850 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/521 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-21Intel e7505: build as separate object fileKyösti Mälkki
No longer include northbridge files directly in the source for mainboard romstage.c and fix includes. Also make required adjustments to function declarations. Change-Id: Iafdcc0766ed44c64cc628e5935eef2c6372f5f22 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/906 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 09:24:17 +0000