summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Expand)Author
2016-01-28Strago: Disable SD Card Detect Simulation in FSPHannah Williams
2016-01-28intel/strago: Remove support for older rev boardsHannah Williams
2016-01-28soc/braswell: Configure Boot Flash Write Protect status GPIOHannah Williams
2016-01-28intel/strago: Enable native mode on sd card cd lineJagadish Krishnamoorthy
2016-01-28intel/strago: Disable unused lines on Gpio North BankJagadish Krishnamoorthy
2016-01-28soc/braswell: Fix DSP clockfdurairx
2016-01-28mb/intel/d510mo: Use SATA AHCI by defaultDamien Zammit
2016-01-28mb/intel/d510mo: Use native gfx initializationDamien Zammit
2016-01-28mb/intel/d510mo: Add CPU, SMI-trap and PIC to DSDTDamien Zammit
2016-01-28mb/intel/d510mo: Add missing GPIO and GPENDamien Zammit
2016-01-28nb/intel/pineview: Native VGA init (CRT)Damien Zammit
2016-01-28intel/strago: Set LPC_CLKRUNB to PU_20K to solve leakage issue.Kane Chen
2016-01-28intel/strago: EC_IN_RW gpio input configuration.Divagar Mohandass
2016-01-28intel/strago: Clean up DDR configuration.Divagar Mohandass
2016-01-28intel/strago: Disable unused devices.Divagar Mohandass
2016-01-27intel/strago: Fix GPIO configHannah Williams
2016-01-27intel/sklrvp: Remove mainboardMartin Roth
2016-01-26ga-g41m-es2l: Instead of forcing native VGA, make it selectableMartin Roth
2016-01-26mainboard/intel/d510mo: Licence fixes and azalia verb tableDamien Zammit
2016-01-25mc_tcu3: Enable auto generated attributes in cbfsWerner Zeh
2016-01-24purism/librem13: Fix select of EC_PURISM_LIBREMMartin Roth
2016-01-22google/oak: Configurate SD card detection pinYidi Lin
2016-01-22mediatek/mt8173: move rtc_boot() to romstageYidi Lin
2016-01-22lib: compile mdelay for romstagePatrick Georgi
2016-01-22google/oak: setup usb and configure I2C level shift pinBen Lok
2016-01-22google/oak: Configure backlight control pinsYH Huang
2016-01-22google/oak: configure audioKoro Chen
2016-01-22google/oak: Disable vboot mock data, now that I2C is functionalLiguo Zhang
2016-01-22google/oak: Enable MMU supportJimmy Huang
2016-01-22google/oak: Add support for verstageItamar
2016-01-22google/oak: Enable SPI supportLeilk Liu
2016-01-22Cyan: Update DPTF parameters for higher temperatureT.H.Lin
2016-01-22purism/librem13: Add support for Purism Librem 13 mainboardDuncan Laurie
2016-01-22intel/strago: Set POWER_SOURCE_CONFIG in devicetree.cbKane Chen
2016-01-22google/cyan: Add Wifi regulatory methodHannah Williams
2016-01-22intel/strago: Add method for Wifi regulatory domainHannah Williams
2016-01-22skylake mainboards: Enable CONFIG_VBOOT_EC_SLOW_UPDATEDuncan Laurie
2016-01-22intel/skylake: PL2 override changespchandri
2016-01-22google/veyron_*: Add dual-rank 2GB Hynix module to SDRAM configsDavid Hendricks
2016-01-21chromeos: import Chrome OS fmapsPatrick Georgi
2016-01-21google/veyron_mickey: Update Hynix memory configurationLang Zhang
2016-01-21google/tidus: initial upstream migrationMatt DeVillier
2016-01-20Kconfig: Remove selects that enable 'choice' symbolsMartin Roth
2016-01-19lenovo/t400: Revise onboard IRQ routingNico Huber
2016-01-19intel/kunimitsu: Add device properties for Nuvoton codecYong Zhi
2016-01-19google/chell: Adjust nuvoton 8825 button thresholds, add propertiesBenson Leung
2016-01-19google/chell: Modify DqsMapMike M Hsieh
2016-01-19google/chell: Add new memory part for DVT buildDuncan Laurie
2016-01-19intel/kunimitsu: Set I2C[4] port voltage to 1.8vNaresh G Solanki
2016-01-19google/chell: Set FSP params for min assertion widths and serirqDuncan Laurie
2016-01-19google/glados: Set FSP params for min assertion widths and serirqDuncan Laurie
2016-01-19google/chell: Reduce power-on keyboard backlight brightness to 25%Duncan Laurie
2016-01-19google/lars: Set Correct RCOMP Target for LARs EVT boardsSubrata Banik
2016-01-19google/lars: Enable eMMC HS400 modedavid
2016-01-19google/chell: Enable eMMC HS400 modeRyan Lin
2016-01-19google/lars: Enable SaGv featuredavid
2016-01-19intel/kunimitsu: Enable FspSkipMpInit tokenRizwan Qureshi
2016-01-19google/chell: Enable FspSkipMpInit tokenBarnali Sarkar
2016-01-19google/lars: Enable FspSkipMpInit tokenBarnali Sarkar
2016-01-19intel/skylake: Enable SaGv featureharidhar
2016-01-19google/lars: SPD changes for EVT boarddavid
2016-01-18google/glados: Enable FspSkipMpInit tokenBarnali Sarkar
2016-01-18google/lars: Enable ALS connected to ECdavid
2016-01-18google/lars: Add keyboard backlight supportdavid
2016-01-18intel/kunimitsu: Set BOOT_BEEP gpio to a default loRohit Ainapure
2016-01-18google/chell: Add VR config settingsrobbie zhang
2016-01-18google/glados: Add VR config settingsrobbie zhang
2016-01-18google/glados: Add pull-ups on LPC address lines and setup PCH_WP earlyDuncan Laurie
2016-01-18google/chell: Minor updates from EVT and FSP 1.8.0Duncan Laurie
2016-01-18google/lars: Add VrConfig UPD parametersdavid
2016-01-18google/lars: Correct the output for crossystem wpsw_bootdavid
2016-01-18skylake boards: csme: add p2sb device and hecienabled devicetree variableArchana Patni
2016-01-18intel/kunimitsu: Power gate Kepler devicePravin Angolkar
2016-01-18intel/kunimitsu: Enable TPM PIRQRishavnath Satapathy
2016-01-18intel/kunimitsu: add nhlt supportNaresh G Solanki
2016-01-17google/lars: Enable TPM PIRQdavid
2016-01-17google/lars: Enable 20K PU on LPC_LAD 0-3david
2016-01-17google/lars: Remove/Disable Wake on landavid
2016-01-16google/lars: add nhlt supportSubrata Banik
2016-01-16mainboard: Drop abuild.disabled files for Skylake boardsStefan Reinauer
2016-01-16intel/kunimitsu: remove/disable Wake on lanRizwan Qureshi
2016-01-16google/lars: Add new configuration parametersdavid
2016-01-16google/lars: Disable SD 3.0 Controller [D30:F6]Subrata Banik
2016-01-16intel/kunimitsu: Add VrConfig UPD parametersRizwan Qureshi
2016-01-15intel/kunimitsu: Add new configuration parametersRizwan Qureshi
2016-01-15intel/kunimitsu: Enable 20K PU on LPC_LAD 0-3pchandri
2016-01-15google/lars: Set DPTF critical temperature to 99Cdavid
2016-01-15google/lars: Disable kepler devicedavid
2016-01-15google/lars: Add support for MAX98357A audio amplifierSubrata Banik
2016-01-15intel/kunimitsu: Correct the output for crossystem wpsw_bootArindam Roy
2016-01-15google/lars: Update the PL1 value as TDPdavid
2016-01-15google/chell: Fix the P/N number for samsung K4E6E304EE-EGCFWisley
2016-01-15intel/kunimitsu: Add support for MAX98357A audio amplifierRohit Ainapure
2016-01-15google/chell: add nhlt supportAaron Durbin
2016-01-15google/glados: add nhlt supportAaron Durbin
2016-01-15intel/kunimitsu: Update the PL1 value as TDPSumeet Pawnikar
2016-01-15google/lars: Disable eMMC HS400 capabilitydavid
2016-01-14mb/lenovo/x200: Add panel power sequence valuesNico Huber
2016-01-14mainboard/lenovo: reserve century byteAlexander Couzens
2016-01-13tree: drop last paragraph of GPL copyright header from new filesMartin Roth