| Age | Commit message (Collapse) | Author |
|---|
|
This is the initial version of README.
AMD provides stable Bettong code in github. Add the link and bug fixed
list to README.
Change-Id: Ie8b761096fd1850afb9363ebb761aa4992b47643
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/11737
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
1. Use write_pci_int_table to write registers 0xC00/0xC01.
2. Add GPIO, I2C and UART interrupt according
"BKDG for AMD Family 15h Models 60h-6Fh Processors",
50742 Rev 3.01 - July 17, 2015
3. The interrupt valudes are moved from bettong/mptable.c.
All devices work in Windows 10.
Change-Id: Iad13bc02c84a5dfc7c24356436ac560f593304d7
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/11746
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
These platforms needed to be adjusted to fix various Kconfig warnings.
Both platforms needed MAINBOARD_HAS_NATIVE_VGA_INIT because they're setting
MAINBOARD_DO_NATIVE_VGA_INIT.
veyron_emile needed a few symbols that depend on CHROMEOS to be moved
into a new config CHROMEOS section. This matches the other CHROMEOS
platforms.
veyron_danger needed to select MAINBOARD_HAS_CHROMEOS before the
CHROMEOS symbol was set.
Change-Id: I8c7f594ba572a02513a68095c16314006fb4e379
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12462
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
EC_SOFTWARE_SYNC depends on CHROMEOS, so move it into the CHROMEOS section.
This fixes the kconfig warning:
warning: (CHROMEOS && BOARD_SPECIFIC_OPTIONS ...) selects
EC_SOFTWARE_SYNC which has unmet direct dependencies
(MAINBOARD_HAS_CHROMEOS && CHROMEOS && VBOOT_VERIFY_FIRMWARE)
Change-Id: I459f48fd18c7568c4584df7d4aefa69dec3e4907
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12460
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ibefc9dc2e1e0267389eb8d716408bae6026ce084
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12024
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The existing code for the Lenovo T400 works without changes on the
Lenovo R400. Same HDA verbs are provided by Lenovo BIOS on both
laptops.
Change-Id: I1dadddd7250ab80a4c40c2435865d72e3e5d99c9
Signed-off-by: Michał Masłowski <mtjm@mtjm.eu>
Signed-off-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-on: http://review.coreboot.org/8393
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
only enable pcie gpp clocks when the corresponding clkreq pin is asserted
Change-Id: I7822d011bb94867d470c0194e6b652833c395cb2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/12353
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
disable unconnected FCH clock outputs to save some power
Change-Id: Ib3efebb8656392d58d762c23827168017d273de8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/12082
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This fixes Family 15h multiple package support; the previous code
hung in CAR setup and romstage when more than one CPU package was
installed for a variety of loosely related reasons.
TEST: Booted ASUS KGPE-D16 with two Opteron 6328 processors
and several different RDIMM configurations.
Change-Id: I171197c90f72d3496a385465937b7666cbf7e308
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12020
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Merlin Falcon's FCH has GPIO, UART and I2C. All of them are controlled
by registers mapped at MMIO space.
This ASL code is used for Windows drivers.
TEST:
1. Boot Windows 8 or Windows 10.
2. Install AMD Catalyst driver.
3. AMD FPIO, UART and I2C can be found in device manager.
4. I2C passed Multi Interface Test Tool (MITT) test.
Change-Id: I7ffe3fe0046d9a078cc38176c29a8e334646a5a3
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11750
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Emile has a on board ethernet.
BUG=chrome-os-partner:47465
TEST=vpd -s ethernet_mac0=001122334455
build and check the MAC address
Change-Id: I90ed0ed1253c804568fcdd3dd212bb062a48c836
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 99b275c594196de0811f68380e66c226d2649927
Original-Change-Id: I1690a1f39090c57c64d4965092c80eef9070babf
Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311900
Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12452
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
On one particular TV the TV was holding SDA low when it came up. It
would release the SDA when the SCL went low the first time.
Unfortunately the HDMI i2c port wouldn't transmit until the SDA was
released.
Let's detect this case and insert a bogus clock pulse to try to get the
other side to release SDA.
It's unclear why the kernel doesn't have this problem.
BRANCH=none
BUG=chrome-os-partner:46256
TEST=Insignia TV works now
Change-Id: Ic9d27eb69bdc9c5fb11a68258e0c755cdc8b79d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 356ee7503f04e741a41be37ad573b588067b7114
Original-Change-Id: I4b6361877e0576cc4ea2f643f073f1aab660e434
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309258
Original-Reviewed-by: Agnes Cheng <agnescheng@google.com>
Original-Commit-Queue: Agnes Cheng <agnescheng@google.com>
Original-Trybot-Ready: Agnes Cheng <agnescheng@google.com>
Original-Tested-by: Agnes Cheng <agnescheng@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/309546
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12451
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Kernel needs to set Audio IRQ as wake capable.
BUG=None
BRANCH=None
TEST=emerge-lars coreboot
Change-Id: Ib7f0fc52baa006d992a2f91a63417e3f76817634
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 32d82ac48c6f830fbb09b776d0adaf6b7a727416
Original-Change-Id: I3fd70ac99c623a99b07fa1a185ebace8c1fc3d69
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312172
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12450
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch enables GPP_B5 as ACPI_SCI for wake.
It also defines touchpad wake device in ACPI with GPE0_DW0_05 for _PRW.
BUG=none
BRANCH=none
TEST=emerge-lars coreboot
Change-Id: I2b65f6a37783ecdbdbc32ebe613243e042c865e9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ec5b629f920984564f12f2c09458ed300d031f69
Original-Change-Id: I9bd2b3595ae833fa5d07d97a7cda4a29041be837
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311890
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/12449
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Use the keyboard backlight to provide indication that the system is
booting. This is useful for determining that a system is in S0 and
is running BIOS code.
BUG=chrome-os-partner:47435
BRANCH=none
TEST=boot on chell and see keyboard backlight come on early
Change-Id: I43e699bcc2f34998d3d6ce33ce72c7b04b55c146
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a3a0147b6de681365a9c995175076d5f397016fb
Original-Change-Id: I2441c28431e71b13b70e6533e175d29ccfd8d7e9
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312358
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12448
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The GPIO for USBA_1_ILIM_SEL_L should be low to enable 2A charging
from the Type-A port.
BUG=chrome-os-partner:47172
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I1bbcdd467684e7c1372c8ca862d498fb6cbb966c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c8a8fbed6d0fd7aea0a41db2bde104fe7a05cabe
Original-Change-Id: I3b18cbb204cfa19e50f34ea9533018e286342513
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312451
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12447
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
For the rails controllable by the host processor through
gpios turn them off in the sleep paths. The result is that
S3 and S5 will turn off those rails.
BUG=chrome-os-partner:47228
BRANCH=None
TEST=Built for chell.
Change-Id: I5843f13be43a6ec143600585a5a0c47563e533dd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ddd5860dc0cfee68ec2f77f4931665740bede08c
Original-Change-Id: Ife0e2fb11373dd129e20b914b45cd5b56c3493f7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312321
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12446
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
For the rails controllable by the host processor through
gpios turn them off in the sleep paths. The result is that
S3 and S5 will turn off those rails.
BUG=chrome-os-partner:47228
BRANCH=None
TEST=Built and booted glados. Suspended and resumed.
Change-Id: I6d45683b64ca5f7c3c47e11f95951bd2d9abf31e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ed432e2b5535da6f872a53b76886d983f00b4e8e
Original-Change-Id: I94d7e0b00bf7e7da8dc59f299e41b72e8fcb64f4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312320
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12445
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
By calling cbmem_recovery() with `0`, we rewrote the cbmem table even
on the resume path. By that, we lost the OS' resume vector and ended up
loading the payload.
Change-Id: Ic24a12d4143d6924321b1d01f07a467c58c4e9ea
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/12420
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since there are no longer any newisys mainboards, remove the directory
and Kconfig files. This removes the Kconfig warning:
mainboard/newisys/Kconfig:3:warning: config symbol defined without type
Change-Id: Icb2e782173166a26fa261f6cfb81b665a846931e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12423
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Kernel needs to set Audio IRQ as wake capable.
BUG=chrome-os-partner:47450
BRANCH=NONE
TEST=System wakes up from S0ix by pressing headset buttons.
Change-Id: I0f89d05b4c5449e5e3277dde938d941e4ad8cbea
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 65bf434f7c7e1662211f9c8bf61eeb4f41bdc675
Original-Change-Id: I7b5b564023044b4458eb0976488018b3226f4c70
Original-Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311793
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12414
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I2f2658eb8b3142c86fef4ee50792f51954686cca
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12409
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I12323d76ab90f643f4dd4351d7e99824ec24f9be
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12408
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The plugged devices on PCIe should use IOAPIC2 instead of standard
IOAPIC1. The entries in IOAPIC2 count from the end of IOAPIC1.
The unchanged code worked because the OS uses MSI instead APIC.
To test that, boot linux with parameter pci=nomsi and see if the devices
like NIC work well as they do without the booting parameter.
run 'cat /proc/interrupts' to see if devices actually use
no-msi.
Change-Id: I5eab28956b7a3fbc7c10447e99d6c11dbe6a1d14
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12363
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The plugged devices on PCIe should use IOAPIC2 instead of standard
IOAPIC1. The entries in IOAPIC2 count from the end of IOAPIC1.
The unchanged code worked because the OS uses MSI instead APIC.
To test that, boot linux with parameter pci=nomsi and see if the devices
like NIC work well as they do without the booting parameter.
run 'cat /proc/interrupts' to see if the devices actually use
no-msi.
Change-Id: Id6d35224312aeb6e3a175ec9990e0bb34bad67e7
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12362
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I6eba36dad71a2a2713181382484dc0e0976e1dad
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11988
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I9a7049fd5601da10a954e02427ad59189fa93fa9
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12407
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If839fd71ed12c1fe27aeab374e242a6855737f5d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11994
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
o. Make some gpio changes base on Emile spec.
o. Init sdmmc function.
o. Revert cpu freq reducing in recovery mode since Emile
have more effective thermal than Mickey.
o. Revert the changes of lpddr3-samsung-2GB config.
BUG=chrome-os-partner:46658
TEST=build and boot on Emile
BRANCH=veyron
Change-Id: Ibdc2ce511c8e215c202e2067d79f4c60cdfca738
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 39e5436c8aa3353af77f62e548f48d19dc722999
Original-Change-Id: Ib2c78c9b5e3ac6620ab1772879a7ea0f7007f96e
Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/307651
Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12396
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch enables GPP_B5 as ACPI_SCI for wake.
It also defines touchpad wake device in ACPI with GPE0_DW0_05 for _PRW.
BUG=chrome-os-partner:43491
BRANCH=none
TEST=Build for kunimitsu. Tested wake from touchpad on a reworked kunimitsu board.
Change-Id: I4347be8f7a4552c6b583f0797fab64045aa9792e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8c21f3b5df21d96937975dc20ee5e2f83fb3d75e
Original-Change-Id: I76e69bdba81ec22ae67c7cff3a807cea8c54a5b3
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311007
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is a copy of mickey and renamed.
CQ-DEPEND=CL:306967
BUG=chrome-os-partner:46658
TEST=build coreboot
BRANCH=veyron
Change-Id: I9e1232f3f1334ec747a5beb52f214635a7ab08ae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9316a9ec27d5799e290add1e5818f4449b680fde
Original-Change-Id: I906de7bbc8b8e110e0774c14ec636a327230b325
Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/307620
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When enabling CONFIG_SEPARATE_VERSTAGE the functions in chromeos.c need
to be put into verstage.
BUG=chrome-os-partner:46289
BRANCH=none
TEST=enable SEPARATE_VERSTAGE and build for chell
Change-Id: Ic58a6e383806a7a64b9af760e194fddf15c645f1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 403f0707074802371237beecf1941034c1612f10
Original-Change-Id: Ib1154869974337b53a64efa5892a83ecd81973b8
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/310928
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12393
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to wake from trackpad and wifi we cannot enable Deep S3.
BUG=chrome-os-partner:46289
BRANCH=none
TEST=wake from trackpad on chell
Change-Id: Ieb2210d5d15b5f5d744a686c743df11e5d72558f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cbc74e13b754249869144df84ab2bb9b7e77119a
Original-Change-Id: I84265197fb964e0594a4672a40fd3e2362e29ae1
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311306
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12392
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds the SPD for SK-Hynix H9CCNNNCLTMLAR memory to be
used in the EVT build.
BUG=chrome-os-partner:47346
BRANCH=none
TEST=emerge-chell coreboot
Change-Id: I45d0840e43ed81d8286b005f0a99b014b7f0cf28
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1e917440141c586cb370147f9c5b782d6e77ea10
Original-Change-Id: I02f1349f38d83f4a09887adf81384b5a8f475dd0
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311214
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12391
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The family variable was not being set yet for skylake, add this
to the current boards.
BUG=chromium:551715
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: Icf175e4ce89cb47b9eabce1399eb3ef29e7a607f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7e379402f38634eb0204e03b616111fff9515cec
Original-Change-Id: Ia31fb04b5c22defc71a0c02d9fa1eff93ccbc49d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311213
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12390
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The net names are offset by 1. My board is not stable enough
to really test all of these yet...
BUG=chrome-os-partner:46289
BRANCH=none
TEST=emerge-chell coreboot
Change-Id: I65e17323f2819eca130c1bf0ccbc3ea0ec2f383f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 327194dcfcb3a5c9f431b1a2e26c230cb2b2a48b
Original-Change-Id: I50e9ea091bb6e6a1da3a9434ae0fbf3f652fa354
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311113
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12389
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: If7b6062fd4df16ae2864b5d9adfdd19c4356691c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12400
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This patch adds CC6 power save support to the AMD Family 15h
support code. As CC6 is a complex power saving state that
relies heavily on CPU, northbridge, and southbridge cooperation,
this patch alters significant amounts of code throughout the
tree simultaneously.
Allowing the CPU to enter CC6 allows the second level of turbo
boost to be reached, and also provides significant power savings
when the system is idle due to the complete core shutdown.
Change-Id: I44ce157cda97fb85f3e8f3d7262d4712b5410670
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11979
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This is an attempt at better compatibility with driver matching etc.
Change-Id: I26eccbe17a31ba2042d0fe1bb424d9f380c0a82e
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-on: http://review.coreboot.org/12351
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Pulled getpir from the attic and used data provided by it
to create the table a bit more programmatically and
added the AGP slot so the video card is given an IRQ
Change-Id: Id3dc1a77ac6382405f5f36707994287e84e1168b
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-on: http://review.coreboot.org/12350
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Up to now the GPIO set up macros for input sets up GPIOs to be
mapped to memory space while macros for outputs sets up GPIOs
to be mapped to legacy io space. This patch adds two additional
macros for legacy output definition and changes the old macros
to memory space mapping.
In addition, the intel/minnowmax mainboard is modified to use
the legacy macros for outputs to ensure this mainboard stays
unchanged in terms of functionality.
TEST=Booted siemens/mc_tcu3 and ensured GPIO set up in linux.
Change-Id: I99e98d31e1a59e63c58d536f2c493d6dcbfd1e75
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/12340
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Iae1cbe7d3a6471561abfdb8e182bc764c38bb222
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11978
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
DRAM training accounts for most of the romstage startup time, yet
if the hardware configuration has not changed from the previous boot
the previously discovered training values are still valid. Use them
if the DIMM configuration has not changed since the last boot.
The SPD values of all installed DIMMs are hashed and stored in the S3
resume data area of the main system Flash device. If a DIMM is changed
the hash will almost certainly change as well, forcing retraining on next
boot.
Change-Id: I37ed277b16476d38e4af76c6ae827a575c6b017d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11976
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ia5c00f07de81d409e6215cc0944d64d00e47b795
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12401
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I8ee757d07c82c151b36def6b709163ff144d244f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11984
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I5323462dcb8a4e84786be38cc85070eb48d4a31d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11982
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I36c2b0290f95f4c0f6bed6a7427fb3aab968d4da
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12376
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I866440595a0a38b65ce037dc9a1f7e4c02c6beb3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12385
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I41d1f9eac2f4c37bec4d046a68f3f1cf95b51703
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12384
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Idd6011302d2164275fe01954ad3e4e13474ec7a9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12382
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I915d5dd4a095b84023a19c9a0474634320207a08
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12381
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Icfdcc5d6043987e22ef9b4db84847d62c91bd305
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12380
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Ie44a3c46b82e77028921339c50ae4c176e38055c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12379
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Rev F's SPD address is different from other revision.
0 1
Channel A A0 A2
Channel B A4 AC
Change-Id: I620d1f9c295f9a0e30e3821ea36a05dd9f7d3495
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12342
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I9099f90c073197cc95bb9630788016b7b8221922
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12383
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Ifd1dfa35ae13ec01d932250994086edebece924d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12377
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Idfec80ce79c906717e679d6576dc94e71da994c9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12378
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Ibf3849dcd7a1ef1d8bc5dfc864172a8254a64b6f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12375
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I460208c18964857be73d9a4449ecfd872ccad98a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12374
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I4a942150590fb69ff97279ff2b48b3be83abafa4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12372
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I5b0fb633b7611e2a69aeb33cd31ca8fd4a83592c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12369
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I1913ca75aa6f2a2c6b97d49faaabc16afd2799f5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12371
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: If0e0a7f69b77cf4bcab4c0dcb58a153485380069
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12373
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I8854c31f242c13b6f91901452f7eb7ce0ef0b255
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12370
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Ic71d8a9137f0bd2a0cc7571a43f9dddb50168d8d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12368
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
The obsolete and removed getpir utility remarked in its output that the
data is autogenerated. The tool was removed because it wasn't very
reliable, so there's no need to point that anymore.
Change-Id: I5d624931ba7872b1fefa8fa3c270ae7367e069fa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12354
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Copy from the CL https://chromium-review.googlesource.com/#/c/307028/
(I40c540dad32beefe249f025b570c347d3ad08c36)
BRANCH=None
BUG=None
TEST=emerge-lars coreboot
Change-Id: I131fb729661f0f3bfd198cdf238c627bf38a46a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 70d471c507d12924466979c93742944975a03f27
Original-Change-Id: I0128dc65110ba363185db9c2aca5cdb140c344c2
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/310394
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12344
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The on-board eMMC is designed as 2.0. If it is set as 3.0,
it can not be detected.
Change-Id: I9fd913f76535e65c1672924ebdeba3d35dea59cc
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11748
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
1. Bettong Rev A-E are DDR3, Bettong Rev F is DDR4.
2. DDR4 uses different memory configuration in AGESA.
Pass memory configuration parameters in agesawrapper_amdinitpost.
3. Tested on Rev C and Rev F.
Both of them can boot to Windows 8 and have the correct memory size.
Change-Id: Ia0d35ebf1b65c399abc3777ee6bdb107437a4345
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11733
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Bettong uses 3 GPIO(5-7) pins to identify board.
The GPIO ports are mapped to MMIO space.
The GPIO value and board version are mapped as follow:
GPIO5 GPIO6 GPIO7 Version
0 0 0 A
0 0 1 B
......
1 1 1 H
Change-Id: I72df28043057d8c4ccc4a2e645011ca5379e9928
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11732
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The RAM voltages can be set per socket, which contains two nodes.
Only reset the allowed voltages per socket before processing a new socket and
not after every node.
Change-Id: Ia0e47676c7a3eebd56a17ab6de0e9690bf8cf703
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/12297
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
Change-Id: I3fbb897feb68d899e5dec075a09d0dd605eca5ce
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/12309
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The Ultra 40 M2 is a dual Socket F workstation with MCP55/IO55 chipset,
DME1737 superio and onboard Firewire. This board port is for family
0Fh (K8) processors.
Due to existing bugs, having memory on the second node will cause
raminit to fail.
Change-Id: I5b62ade908ffeb80e22f14edbe4c1ec04880bd30
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/12304
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ia275a697caa73168553b5d588d54df651e0539d7
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/12303
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
TEST: Booted T400 with Intel/ATI hybrid graphics in integrated
mode with native Intel graphics init and verified integrated
panel framebuffer functionality in SeaBIOS and Linux.
Change-Id: I37e72c5dad0d7ab3915cc3d439ae9a4a9b3787e3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9319
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This is required for flashrom to work...
Change-Id: Icc0a52e0ca103c897d96fa8f3cf83b30780c7b49
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-on: http://review.coreboot.org/12349
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
All the deleted mainboard files contain no code besides some print
statements denoting, that the init is executed.
If such statements are desired, this should be done in common code so it
does not have to be added to each mainboard.
Therefore, also delete files with just print statements.
Change-Id: I379e4b1e1b1725648c6231bc6954ac3cc655a596
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/12355
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The Intel Stargo2 is a communications device reference design.
This mainboard uses the Sandy/Ivy Bridge and is paired with
the i89xx southbridge. The FSP package is available from Intel:
https://intel.com/fsp.
Change-Id: I75c527f0eb0de1ee6ac13d8d276d7cf23b5b120c
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/12170
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I76f74ed4ae383f8b1f57eaaa2e025035002430f2
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11967
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since, SMP support is removed for ARM64, there is no need for CPU
initialization to be performed via device-tree.
Change-Id: I0534e6a93c7dc8659859eac926d17432d10243aa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11913
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
As ARM Trusted Firmware is the only first class citizen for
booting arm64 multi-processor in coreboot remove SMP
support. If SoCs want to bring up MP then ATF needs to be
ported and integrated.
Change-Id: Ife24d53eed9b7a5a5d8c69a64d7a20a55a4163db
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11909
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
As ARM Trusted Firmware is the only first class citizen for
booting arm64 multi-processor in coreboot remove spintable
support. If SoCs want to bring up MP then ATF needs to be
ported and integrated.
Change-Id: I1f38b8d8b0952eee50cc64440bfd010b1dd0bff4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11908
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This cast only hides errors in matching the API properly.
Change-Id: Ic396dfb572a50ac5ce5c1c83424e1f17f15bad1d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12270
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
PMIOxEE is for setting USB3 power rail. Set it to S0, otherwise
going into hibernation can not be wake up.
Change-Id: I692497bad24d745738d670897e725a568c1db114
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11373
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
The plugged devices on PCIe should use IOAPIC2 instead of standard
IOAPIC1. The entries in IOAPIC2 count from the end of IOAPIC1.
The unchanged code worked because the OS uses MSI instead APIC.
To test that, boot linux with parameter pci=nomsi and see if the devices
like NIC work well as they do without the booting parameter.
Change-Id: I893e73f2aab3227381e44406fa285613e4ba2904
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11374
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ic3cdfa6086a45aa231aa817d5ef6998823589818
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7108
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- CACHE_ROM is no longer used in the coreboot code. It was removed in
commit 4337020b (Remove CACHE_ROM.)
- CAR_MIGRATION is also no longer used in coreboot code - it was removed
in commit cbf5bdfe (CBMEM: Always select CAR_MIGRATION)
- MARK_GRAPHICS_MEM_WRCOMB was removed in
commit 30fe6120 (MTRR: Mark all prefetchable resources as WRCOMB)
Change-Id: I8b33a08c256f6b022e57e9af60d0629d9a3ffac8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12327
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PCH pin names in the schematic were incorrectly labeled.
BUG=chrome-os-partner:46289
BRANCH=none
TEST=build and boot on chell
Change-Id: I6153137b7c04d22db5b3f00f5eaf3f400f4c344c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6f362900b0635dc392c63b25a88a7723f22b467a
Original-Change-Id: If6f8744f020a35a76647366b247723b03c02991a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/310061
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12324
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch enables the Fan thermal participant device
in the device tree for thermal active cooling action
for DPTF on SKL-U fan based kunimitsu board.
This patch defines the _ART table in dptf ASL file.
With active cooling policy (_ART), we can control the
fan on/off and speed.
BRANCH=None
BUG=chrome-os-partner:46493
TEST=Built for kunimitsu board. Tested to see that the
thermal devices and the participants are enumerated and
can be seen in the /sys/bus/platform/devices. Also,
checked the FAN type the cooling devices enumerated
in the /sys/class/thermal with sysfs interface.
Change-Id: I40c540dad32beefe249f025b570c347d3ad08c36
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 82ae11643ca23e65780006f3890f1d173363b8af
Original-Change-Id: If44b358052a677d13c74919f09a3eb89611fccad
Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/307028
Original-Commit-Ready: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Tested-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12323
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The last_boot NVRAM option was deprecated and removed in
commit 3bfd7cc6. Remove the last_boot option from all
affected mainboards to eliminate user confusion.
Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12316
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
On server boards with a recovery jumper, having the fallback path
less sensitive to power fluctuations or BMC issues makes sense.
Increase the maximum number of boot attempts before automatic
fallback to 10 on these boards.
Change-Id: Iabe0b0cbf332686db8e9380a8b65a1477173599c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12320
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
TEST: Booted ASUS KGPE-D16 with single Opteron 6380
* Unbuffered DDR3 DIMMs tested and working
* Suspend to RAM (S3) tested and working
Change-Id: Idffd2ce36ce183fbfa087e5ba69a9148f084b45e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11966
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I34501d3fc68b71db7781dad11d5b883868932a60
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11965
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I21777283ce0fd3c607951204a63ff67dc656c8cc
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11956
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Some comments and leftover static USB devices whose function
numbers changed.
Change-Id: I4d7c7499fe436588ef7e5ae030212c2638a4505f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12263
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To store memory configuration in SPI flash currently adds
some 150 ms delay in ramstage, visible in timestamps listing
at 75:cbmem post.
Change-Id: I1160259054b58e9a8df2a105c730e0f4140be1f5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12215
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Disables mouse ps2 data/clock signals, not connected in hardware.
Purpose of other GPIOs is not really known, but match them
with superiotool dump taken from vendor bios.
Change-Id: I7b549fbd7dd3fa4cbd507d76882b60bc324a4bd0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12214
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Several ramstage files were inadvertently using Family 10h-specfic
structures, causing unstable operation. Use the K8-specific
structures instead.
Change-Id: I64066dfdca83557393499b77726051e25b814381
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12290
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I7da84b064287a445fd75a947e2f96ce1ae30d3de
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11954
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
