summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2008-01-18Please bear with me - another rename checkin. This qualifies as trivial, noStefan Reinauer
code is changed. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3052 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-12Fix the documentation of GPIO setup, tell W83627EHF to use externalRudolf Marek
suspend clock (undocumented in datasheet, documented in 'W83627HG-AW'). Introduce sio_init function for all this. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3049 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-09Use macros to improve readability of the device-to-pin IRQ assignmentsCarl-Daniel Hailfinger
in GA-2761GXDK mptables.c. Thanks to Torsten Duwe for initial code. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: 蔡明耀 (Morgan Tsai) <my_tsai@sis.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3041 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-07Improve readability and remove redundancy by wrappingTorsten Duwe
similar smp_write_intsrc calls in preprocessor macros. Also add some comments about the actual devices the INTs belong to. Signed-off-by: Torsten Duwe <duwe@lst.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3035 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-30The following mainboards had a file named microcode_updates.c in theirCarl-Daniel Hailfinger
mainboard directories, but the code was not referenced anywhere. intel/jarrell dell/s1850 supermicro/x6dhr_ig2 supermicro/x6dhr_ig supermicro/x6dhe_g2 supermicro/x6dhe_g Besides that, the contents of these files were either duplicates of src/cpu/intel/model_f3x/microcode_M1DF340E.h or src/cpu/intel/model_f3x/microcode_M1DF3413.h. svn remove the following files: src/mainboard/supermicro/x6dhe_g/microcode_updates.c src/mainboard/supermicro/x6dhe_g2/microcode_updates.c src/mainboard/supermicro/x6dhr_ig/microcode_updates.c src/mainboard/supermicro/x6dhr_ig2/microcode_updates.c src/mainboard/dell/s1850/microcode_updates.c src/mainboard/intel/jarrell/microcode_updates.c Abuild tested, as expected no failures. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3028 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-21Add an interrupt entry for the onboard firewire controller,Torsten Duwe
Bus 1, device 10 (function 0 only), routed to IO-APIC pin 18 (verified on an v1.0 board). Signed-off-by: Torsten Duwe <duwe@lst.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3023 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-19Fix for newer iasl versions (trivial)Corey Osgood
Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3020 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-19trivial fix for abuild.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3019 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-19Initial AMD Serengeti_Cheetah_FAM10 platform for Barcelona support.Marc Jones
Signed-off-by: Marc Jones <marc.jones@amd.com> Reviewed-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3016 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-17Enable IDE legacy port access for all 440BX based boards per default, asUwe Hermann
this is needed (at the very least) to make FILO work on these boards. Disable UDMA/33 per default, which is slower but the safe choice, as we don't know which IDE devices a user has attached, and some don't support UDMA/33 very well or at all. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3010 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-09This adds the same line (uses CONFIG_PRECOMPRESSED_PAYLOAD) to everyMyles Watson
Options.lb file that already had a "uses CONFIG_COMPRESSED_PAYLOAD_LZMA" line in it. I figure that only adding it to the files that already have support for LZMA payloads makes sure I don't break anything. Signed-off-by: Myles Watson <myles@pel.cs.byu.edu> Acked-by: Ward Vandewege <ward@gnu.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3002 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-05Remove the coherent_ht_car.c file. It is exactly the same asUwe Hermann
coherent_ht.c (save one empty line removed) so there's no use to keep it around. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Marc Jones <marc.jones@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2998 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-04Enable vga option rom support for 1MB rom chip, which is what the h8dmr ↵Ward Vandewege
ships with (trivial). Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2996 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-29Flashrom does not work after booting LinuxBIOS on the Iwill DK8-HTX board,Mondrian Nuessle
according to mcqmcqmcq@fastmail.fm. Fix it. Signed-off-by: Mondrian Nuessle <nuessle@uni-mannheim.de> Acked-by: mcq <mcqmcqmcq@fastmail.fm> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2991 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-27Drop the unfinished, non-working Bitworks IMS board.Uwe Hermann
It never worked in v2 (the v1 port did work AFAIK, though), and it's not really useful as reference for other boards anymore (as we now have a dozen or so 440BX boards which work in v2). This is a specialized, custom board (not sold on the "public market"), so it's probably not useful for pretty much everyone out there anyway. We can easily re-add it later (based on one of the other 440BX boards) should there be interest and/or someone with the hardware to test. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2988 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-26Correction to irq tables. Ronald G. Minnich
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-25More abuild fixes, the previous ones weren't enough. Hopefully this covers ↵Corey Osgood
everything. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2985 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-25Small abuild fix for the iwill dk8_htx and latest iasl. Building this still ↵Corey Osgood
fails for me, but it's an lzma error and probably Debian's fault. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2984 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-25abuild fix for the asus a8v-e_se and newest iasl version (trivial)Corey Osgood
Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2983 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-25abuild fix for the amd serengeti_cheetah and the latest iasl version (trivial)Corey Osgood
Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-25Fix abuild for ASUS MEW-AM.Uwe Hermann
You cannot set 'default ROM_SIZE = 0' in Options.lb (and override it in targets/*/Config.lb). While it'll work for manual builds, abuild doesn't cope with that very well. So set a valid value in Options.lb, too. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2981 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-24Add support for the ASUS MEW-AM board.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2980 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-22Mark devices which are not available on the board with "N/A" toUwe Hermann
make it clearer why they are disabled (trivial). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2978 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-201. Fix pirq routing table setting for GA-2761GXDK.Morgan Tsai
2. Southbridge PCIe slots are working correctly now. 3. Disable keyboard & mouse ports for GA-2761GXDK. Signed-off-by: Morgan Tsai <my_tsai@sis.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2976 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-14Gigabyte M57SLI: Fix watchdog clocksource to be external, not internal.Carl-Daniel Hailfinger
Reason: The existing code does not tell us why it sets the watchdog clock at all, but since it appears in cache_as_ram_auto.c instead of the usual place (Config.lb) there has to be some meaning to it. Simply do what the proprietary bios does: Use the external clock source. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2973 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-14Autodetect presence of serial flash and set up the board accordingly.Carl-Daniel Hailfinger
This enables us to have only one configuration and one set of code for all revisions of the Gigabyte GA-M57SLI-S4. Flash is now setup correctly for both SPI and LPC flash. Detection of SPI flash in flashrom on rev. 2.x boards now hangs instead of failing. However, that is just an effect of the combination of incomplete initialization of the SPI controller and paranoid checks in the flashrom SPI code. If anyone wants to work on that, he needs a logic analyzer or creative imagination. Hint: LPC-to-SPI read passthrough, clock signal. Remaining issues for the M57SLI: Fan/environment control. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Harald Gutmann <harald.gutmann@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2972 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-14* Maintaining SiS south bridge device IDs.Morgan Tsai
* Strip unnecessary driver modules. Signed-off-by: Morgan Tsai <my_tsai@sis.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2971 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13Small fix to make abuild happy (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2969 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13Random minor cosmetical or coding style fixes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2966 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13Add support for FID/VID changes messages.Rudolf Marek
Upon incoming SMAF message from CPU (C3 or FID/VID change), the SB will assert SLP# which is connected to LDTSTOP_L on K8 CPUs. Question is for how long. Imho for 100us. Which is more than plenty (2us required) I will try to justify this once I know what bios to set in SB. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2965 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13Drop obsolete failover.c, forgot it in the last commit (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2961 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13Various small fixes to make the Tyan S1846 match the format ofUwe Hermann
the other supported 440BX boards. Fix up totally b0rked static device tree in Config.lb. Drop useless and duplicated failover.c, use global one. Make CPU init actually work (result: massive speed-up). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2960 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13Add support for the Advantech PCM-5820.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2959 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-12Fix the remaining issues with GA-M57SLI Super I/O GPIO configuration.Carl-Daniel Hailfinger
With this patch, flashing the parallel EEPROM on board revisions 1.x finally works. Flashing the serial EEPROM of board revisions 2.x is just one patch away. Torsten Duwe says: Flash erase on my board was failing reliably. Now it works! Andreas B. Mundt says: For the first time I was able to write with flashrom and LB. $flashrom -Vv --write linuxbios.rom [...] Vendor ID: GIGABYTE, part ID: m57sli Found chipset "NVIDIA MCP55", enabling flash write... OK. [...] SST49LF040B found at physical address 0xfff80000. Flash part is SST49LF040B (512 KB). LinuxBIOS last image size (not ROM size) is 4096 bytes. Manufacturer: GIGABYTE Mainboard ID: m57sli This firmware image matches this motherboard. Programming page: 0007 at address: 0x00070000 Verifying flash... VERIFIED. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Torsten Duwe <duwe@lst.de> Tested-by: Andreas B. Mundt <andi.mundt@web.de> Tested-by: Torsten Duwe <duwe@lst.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2955 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-12Try to fix a few loose ends on the GA-M57SLI Super I/O GPIO Carl-Daniel Hailfinger
configuration. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Torsten Duwe <duwe@lst.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2954 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-08Fix up totally broken Super I/O config on the MS-6178. AddUwe Hermann
PIRQ table to make most devices work. Random small fixes (trivial). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2953 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-07Final set of changes to make Alix1c work.Ronald G. Minnich
Fix IRQ tables (Thanks to Marc Jones) Fix IRQ SLOT # Comment out ram test in early startup. make the debug print in lx/raminit.c a debug print, not emerg print Set the default console log level to 3, but leave in the possibility of running with more info (leave maximum at 11) Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Marc Jones <marc.jones@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2952 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-07Make the LZMA compression option work in buildrom.Myles Watson
Signed-off-by: Myles Watson <myles@pel.cs.byu.edu> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2950 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-07Add PCI IDs for most Intel southbridges of the 82801 seriesUwe Hermann
(ICH/ICH0 up to the ICH9 family) in preparation for further code improvements for the i82801xx southbridge code. Small fixes in the 6300ESB PCI IDs. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2947 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-05Fix the M57SLI routing table, as apparently set up from LinuxBIOS onTorsten Duwe
that board. Shift PCIe pin numbers downwards, and PCI int pins upwards. This puts both PCI slots' int A and PCIe 16x int A into the right position. Signed-off-by: Torsten Duwe <duwe@lst.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2946 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-04make agami aruma compile again. Stefan Reinauer
Rudolf's suggestion making the symbol weak is elegant, but let's allow some more discussion. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2944 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-04another small abuild fix.. add payload compression "uses" for the a8v-e-seStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-04Add dummy function for MCFG on those mainboards that provide ACPI but don't Stefan Reinauer
have PCIe MMCONFIG. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2941 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-04merge changes to match agami's production environmentStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2940 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-04Restructure the PCI IDs list for the ICH* chipsets from ICH/ICH0 up toUwe Hermann
ICH5/ICH5R (more to follow) in preparation of further 82801xx improvements. Use human-readable names for the PCI ID #defines. Rename *_ISA to *_LPC as per datasheet. The 82801DBM only has 3 (not 4) USB devices, looks like a copy-paste error. The fixes in southbridge code are only to keep the build working for now, any real improvements will only go into the 82801xx code in future. This is abuild-tested so it shouldn't break anything. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2938 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-02Asus A8V-E-SE support from Rudolf MarekRudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2934 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-021. vgabios removed, will go to extra repositoryMorgan Tsai
2. Rename sisnb.c to sis761.c 3. Delete many mis-definition for sis device in src/include/device/pci_ids.h 4. Trim trailing spaces for all files Signed-off-by: Morgan Tsai <my_tsai@sis.com> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2931 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-02fix up iwill board compilation. Untested, trivialStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2930 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-02fix up IBM servers.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2929 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-02get arima hdama building again.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2928 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-02This patch fixes the superio of the khepri 2100e as detected:Stefan Reinauer
> superiotool r2922 > Found Winbond W83627HF/F/HG/G (id=0x52, rev=0x0d) at 0x2e Don't use the non-working trident driver for the blade3d (onboard vga in the rom emulator has not been tested either) It also adds some preliminary CAR support to the board, so it has a chance to build again. This board was broken since a couple of months, and the changes are minimal, so I consider this a trivial change -- It doesn't change anything that was used, obviously Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2926 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-01This patch is a trivial response to a good comment from Uwe, so I amRonald G. Minnich
self-acking before it gets lost. Acked-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2924 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-31As started in Torsten Duwe
http://www.linuxbios.org/pipermail/linuxbios/2007-October/025385.html , but change all apparantly related values that differ on my board with legacy BIOS. This makes both PCI cards appear, as well as the firewire device TSB43AB23. * PCI 01:07.0 appears fully functional * PCI 01:08.0 (closer to the board edge) appears, but no interrupts * PCI 01:0a.0 (FireWire) untested Since none of these was even present without the patch I suggest to apply it. Signed-off-by: Torsten Duwe <duwe@lst.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Harald Gutmann <harald.gutmann@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2921 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-31Add initial support for the Compaq Deskpro EN SFF P600.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2920 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-31Add initial support for the Biostar M6TBA.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2919 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-31Add initial support for the AZZA PT-6IBD.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2918 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-31Add initial support for the A-Trend ATC-6220.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2917 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-31Add initial support for the GIGABYTE GA-6BXC.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2916 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-31Add initial support for the ASUS P3B-F.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2915 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-30Add initial support for the ASUS P2B-F.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2914 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-30Various smaller fixes to make the ASUS P2B match the formatUwe Hermann
of all the other boards in this patch series. Add missing PIRQ table to make most devices work. Enable VGA support. Add flashrom flashing protection code. Make CPU init actually work (result: massive speed-up). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2913 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-30[LINUXBIOS] Add the CPU_OPT flag to facilitate passing flags into the buildJordan Crouse
buildROM passes build flags through the CPU_OPT environment variable - especially -fno-stack-protector for those of us lucky enough to have Debian/Ubuntu. This adds to the cache_as_ram_auto.inc target for the GA-2761GXDK so that the resulting cpu0.S is clean. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2911 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-30Rename the SiS761GX/SiS966 board to the correct name, GIGABYTE GA-2761GXDK.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2908 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-29Thanks to the great efforts of Morgan Tsai of SiS we support the SiS966Morgan Tsai
southbridge now: From: Morgan Tsai <my_tsai@sis.com> It supports SiS761GX / SiS966 chipset, only for AMD K8 platform so far. Due to integrated VGA sharing system memory, some code in southbridge folder have to init northbridge. Copyright (C) 2007 Morgan Tsai <my_tsai@sis.com> Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS) Change Log: Newly support GIGABYTE GA-2761GXDK CPU type: AMD AM2 socket Northbridge: SiS 761GX Southbridge: SiS 966 SuperIO: ITE8716F Signed-off-by: Morgan Tsai <my_tsai@sis.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2902 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-26This code gets us to a working linux boot on the alix1c. I have not tested Ronald G. Minnich
Ethernet yet. The fixes are a board-specific fake spd_read_byte, cleaning up comments, and just in general customizing for the 1c. The lxraminit change fixes a bug (&& used instead of ||), adds some debug prints which were VERY useful debugging the alix1c, changes fatal error messages from print_debug to print_emerg, and adds two functions: banner, which just prints out a string with a banner, and hcf, which print an emergency message and then pushes null bytes into the uart forever, just to make sure that no bytes get lost for any reason. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2899 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-26Add support for the AXUS TC320 thin client.Juergen Beisert
This board uses nearly the same devices as the BCOM Winnet100, so most of the new code here is from the BCOM Winnet100. They differ in the IRQ routing table only. BTW: The AXUS board uses standard DIMM memory and can be run at 100MHz SDRAM clock speed (it runs reliably here since month). Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2898 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-24Some fixes for the BCOM WinNET100, mostly in Config.lb:Uwe Hermann
- Add missing entry for the NIC: device pci 0f.0 on end # Ethernet (onboard) - Drop the following lines: register "com1" = "{115200}" register "com2" = "{38400}" Those entries hardcode the BAUD rate (as far as I can tell, please correct me if I'm wrong). We don't want that -- instead the config option TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those lines will not break serial output (COM1, 115200, 8n1). - Enable IDE (PCI device 00:12.2) and add the following register lines to tell the CS5530 code to actually enable IDE channel 0: register "ide0_enable" = "1" register "ide1_enable" = "0" # Not available/needed on this board Tested with a 2.5" hard drive and FILO, works fine. - Enable USB (PCI device 00:13.0), not sure why it was commented. - Enable COM2 as it's used by the smartcard reader. - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix abuild for this board. - Add some more comments. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2896 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-24Ever wondered where those "setting incorrect section attributes forStefan Reinauer
rodata.pci_driver" warnings are coming from? We were packing those structures into a read-only segment, but forgot to mark them const. Despite its size, this is a fairly trivial patch created by a simple search/replace Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2891 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-23The s2882 ships with a 1MB rom chip. The targets/tyan/s2882/Config.lb fileWard Vandewege
assumes a 1MB rom chip. Hence the default position for the VGA bios should also assume a 1MB rom chip, not a 512KB chip. Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2887 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-22Fix typo (trivial)Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-22Add support for a precompressed LZMA payload (trivial).Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2885 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-22This is a hack for easier testing of GRUB2 in LinuxBIOSv2Stefan Reinauer
since it is still our most wide-spread codebase. The patch is pretty trivial, and nobody except Torsten even looked at it in a week, so.... Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2880 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-17Fix up totally broken Super I/O setup on the MSI MS-7260 (K9N Neo).Uwe Hermann
This has not been working at all until now. With this fix, keyboard, mouse, parallel port, and the Super I/O sensors work fine (tested on actual hardware). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2867 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-16Completely rip out / replace the ASUS P2B code (which wasn't really working),Uwe Hermann
replacing it with a minimal, but working, framework which will be expanded. Drop a bunch of useless and duplicated files, add missing license headers. I'm self-acking it this time, the diff is a huge unreadable mess and the old code is broken anyway... This code is tested to build fine, and can boot a Linux kernel up to a login-prompt via FILO (IDE). This is verified on actual hardware. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2859 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-11Set the default video memory to 0 MB for all GX1 boards which don't yetUwe Hermann
use that feature in order to not waste RAM. Also, add missing CONFIG_VIDEO_MB for the eaglelion/5bcm, which should fix the build for that board. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2848 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-10This patch adds the CONFIG_VIDEO_MB option to boards thatCorey Osgood
currently don't have it but need it to compile with the new Geode GX1 VGA support. This sets the size at 4MB, which was the size previously defined in the VGA code. Signed-off-by: Corey Osgood <corey.osgod@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2845 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-09Minor cosmetic changes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2844 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-09Add support for the BCOM WinNET100 (used in the IGEL-316 thin client).Juergen Beisert
See http://www.linuxbios.org/BCOM_WINNET100_Build_Tutorial for hardware description and build tutorials. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2843 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-07Add missing '\n' to a printk_debug() and some other small fixesUwe Hermann
while I'm at it (trivial). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2839 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-24Various cosmetic changes and coding style fixes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2804 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-21Fix abuild for the MSI MS-7260 (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-21Add support for the MSI MS-7260 (K9N Neo) mainboard.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2797 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-20The s2891 ships with a 1MB rom chip. The targets/tyan/s2891/Config.lb file ↵Ward Vandewege
assumes a 1MB rom chip. Hence the default position for the VGA bios should also assume a 1MB rom chip, instead of a 512KB chip. Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2792 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-19Add support for a precompressed LZMA payload (trivial).Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2787 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-19Sorry, I mixed up two patches. Reverting this change.Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2786 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-19Add support for a precompressed LZMA payload (trivial).Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2784 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-13Fix abuild run of the MSI MS-6178 (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2773 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-13Add a common/global failover.c file which can be used by allUwe Hermann
(or at least most) mainboards. This should put and end to copy-paste'ing the same file again and again for every mainboard. Fix the build for the MSI MS-6178 target (wrong location of the common failover.c file). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2772 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-12Add initial support for the Intel 810 based board MSI MS-6178.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2771 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-09Partial changes and fixup.Ronald G. Minnich
Removed reset.c and added copyright headers. Remove debug.c. It is not used and should not be here. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2766 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-08Welcome to PC Engines and the ALIX 1C!Ronald G. Minnich
This is a geode LX board. There are timing settings that are not right yet, we are still trying to get our board to boot Linux :-) Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2765 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-07-12trivial: clarify comment on ADM1026_DEVICE addressPeter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2738 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-07-12some agami i2c mergesStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2735 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-20Artec Group dbe61 mainboard support.Marc Jones
Now uses CAR. New code for SPD-less memory implementation. Updated IRQ routing. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2728 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-19Various minor cosmetics and coding style fixes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2727 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-19This patch fixes up a couple mistakes I made with the i82810 and mew-vw to makeCorey Osgood
the system boot to a command line. This patch comments out the code to set up the vga framebuffer to allow the system to boot, without this fix the system hangs during elfboot. The only line that is absolutely necessary to change is the SMRAM setup, however I've commented out all vga setup to make it very obvious to both the kernel/payload and anyone looking at the code that vga isn't currently working. This setup might also be better handled in northbridge.c, if it doesn't need to be done before ram init, yet another reason to comment it all. In the future, LinuxBIOS needs to be told that the graphics memory area, 1mb or 512kb (at the user or developer's option), is reserved for the onchip vga, but I'm not sure if it's taken at the top or bottom of the memory, yet. LB may also need to set a base address for the AGP aperture and/or be told that range is reserved as well, whether this was originally the job of the system bios or vga bios is still a mystery. It also corrects the number of entries in irq_tables.c, without this fix the kernel would probably complain and hang due to unmapped IRQs. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2725 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-14small agami aruma configuration updates (trivial)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2724 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-14Fix the static device tree of the ASI MB-5BLMP target. This was broken inUwe Hermann
more than just one way. This version should be (more) correct. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2723 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-14This patch adds support for the Intel i82810 northbridge and various i82801xxCorey Osgood
southbridges, along with the Asus MEW-VM. With this, my machine attempts to boot linux, but does so very slowly and fails during the boot process, probably because of the irq tables. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Joseph Smith <joe@smittys.pointclark.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2719 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-12Add the AMD DB800 (AKA Salsa) mainboard.Marc Jones
The DB800 is the AMD LX Reference Design Kit platform. For details see: http://www.amd.com/geodelxdb800 Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2718 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1