summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2018-08-27mb/google/poppy/variants/atlas: Update DPTF parametersTodd Broch
Reduce the CPU passive threshold sample rate from 5 seconds to 1 second so DPTF will react faster to rapid temperature increases. Signed-off-by: Todd Broch <tbroch@chromium.org> BUG=b:113101335 BRANCH=atlas TEST=manual performance/power testing on nocturne. No longer see messages like below in syslog, 'CPU0: Package temperature above threshold' Change-Id: I2dc9d157b54500bae29e123978bb8ad6e05ef619 Reviewed-on: https://review.coreboot.org/28325 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-27mb/google/poppy/variants/nocturne: Update DPTF parametersTodd Broch
Reduce the CPU passive threshold sample rate from 5 seconds to 1 second so DPTF will react faster to rapid temperature increases. Signed-off-by: Todd Broch <tbroch@chromium.org> BUG=b:67459049 BRANCH=nocturne TEST=manual performance/power testing on nocturne. No longer see messages like below in syslog, 'CPU3: Package temperature above threshold' Change-Id: Ic20c718fd3a496db7c7192feec4f230d924cc458 Reviewed-on: https://review.coreboot.org/28324 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-27mb/google/octopus/variants/baseboard: Update DPTF parametersSumeet Pawnikar
Update TSR1 trip point from 48C to 50C. Also, change power limit2 minimum value from 8W to 10W. These are the values as per recent thermal tuning. BUG=b:79779737 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I33a9d2dc3e0e5566d95b1f1e46d3922dc8965b2b Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/28187 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-27mb/google/kahlee: Fix I2C bus 0 timing for GruntAkshu Agrawal
This commit fixes the values and thus fixes the issue of audio device not getting detected on random reboots. Change-Id: I34a4f62815d192005c3324d4f71b0aba377fe738 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/28280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2018-08-27mb/supermicro/h8qme_fam10: Use common pnp_{enter,exit} functionsElyes HAOUAS
Change-Id: Ie3ee4acfd272991133f02a56df6e23aa6071d3e9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-27mb/kontron/986lcd-m: Use common pnp_{enter,exit} functionsElyes HAOUAS
Some unneeded includes are also removed. Change-Id: Icd518c46d8503d11d24466c30840d7e514e9a05d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-27update all FADT version 3.0 to use the get tables functionMarc Jones
Most FADT report using ACPIv3 FADT table. Using the get revision function keeps the table versions in sync. Change-Id: Ie554faf1be65c7034dd0836f0029cdc79eae1aed Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-27siemens/mc_apl1: Disable PCI clock outputs on XIO bridgeMario Scheithauer
This patch disables the unused PCI clock outputs on the XIO2001 PCI Express to PCI Bridge. Change-Id: I0b9cf51a713f4ab46e71d250397486d136c26177 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-08-27mb/google/octopus: add Digitizer and Synaptics Touchpad for bobbaPan Sheng-Liang
add device "WCOM Digitizer" and "Synaptics Touchpad" for bobba BUG=none BRANCH=master TEST=emerge-octopus coreboot Change-Id: Ie0bf8ebab6d9cb9c8fe42a500efaa3d11ae359db Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-25mb/intel/coffeelake_rvp: Remove superfluous header fileArthur Heymans
TEST: same sha256sum with BUILD_TIMELESS=1. Change-Id: Icf3368bcf1351f0e7cd4041c3792d76362aec9e5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-08-24siemens/mc_apl1: Select DDR50 mode for eMMCMario Scheithauer
To increase the lifetime of the circuit, it is necessary to reduce the eMMC speed to DDR50 mode. Change-Id: I40658b44a99e6600ed00950a1a177961f0055e7a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-08-23mb/google/poppy/variants/nocturne: enable "Base Attached Switch" deviceDmitry Torokhov
This enables CBAS device on Nocturne to allow hid-google-whisker driver in kernel properly detect device configuration. Change-Id: I5905a2de208e94062f2768a9b7d22147f85c7f38 Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-on: https://review.coreboot.org/28262 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23siemens/mc_apl1: Make adjustments for the 1st redesign of this mainboardMario Scheithauer
For the 1st redesign of mc_apl1 mainboard some adjustments are necessary: - The FPGA is now connected directly via a PCIe Root Port - Internal Apollo Lake UARTs are now used - Adjusting GPIO settings Change-Id: I8917a52325306f24d1c39a88dac47b0cee760d57 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-08-23siemens/mc_apl1: Move board specific things to mc_apl1 variantMario Scheithauer
A FPGA is not necessarily available in further mc_apl1 variants. So we move the loading of the driver and the notify function to the mc_apl1 variant. Setting the CPU to Max Non-Turbo Ratio is also not absolutely necessary for further variants. Change-Id: I9f8438407f231df08e1ad04655bb6f747257e268 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-08-23mb/foxconn/d41s: Add mainboardArthur Heymans
This supports the Foxconn d41s, d42s, d51s, d52s. The following is tested (SeaBIOS 1.12 + Linux 4.9) and works: - COM1 - S3 resume (with SeaBIOS needs sercon disabled) - Native graphic init on VGA output - SATA - USB - Ethernet - PS2 keyboard The base for this mainboard port was the Intel D510MO port. Change-Id: Ie4ec9cbf70adcdddbc2e5d805e4806825c320072 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28227 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23mb/google/octopus: Add null pointer checkJohn Zhao
src/mainboard/google/octopus/mainboard.c Function dev_find_slot may return NULL, check before its usage. Found-by: klockwork BRANCH=None TEST=Built & booted Yorp board. Change-Id: I160adbe3b0a5a2b0f11fd1567513860664d4bee3 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28235 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23mb/google/octopus/var/meep: Update GPIO config for meepWisley Chen
The change updates GPIO configuration for meep. 1. Update touchscreen power enable GPIO in devicetree. 2. Provide default override tables for GPIO configuration. BUG=b:112955087 TEST=Boot on meep proto board with Intel (Jefferson Peak) wifi card. Change-Id: Idb4e7a510eef15c2e118058d5848080782f4f665 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/28252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-22src/mainboard/*: Remove IFD_*_REGION values for ifdfakeAngel Pons
Since ifdfake has been deprecated in favor of better alternatives, such as flashrom IFD parsing. Therefore, there is no need to support ifdfake any further. Remove the IFD_*_REGION values on the few motherboards with them. Change-Id: Ie07116a7fb960c6ca832d802016f22c6677baac9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28232 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-22mb/google/octopus/variants/bobba: Apply new GPIO configs for bid >= 2Furquan Shaikh
This change updates the board id check for version >=2 to apply new GPIO configs. BUG=b:112618194 Change-Id: I3544c9596c465615818d2040682e554a64fc6b1a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28263 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-21nb/intel/pineview: Use a common MMCONF_BASE_ADDRESSArthur Heymans
This should not be board specific. Change-Id: Ifa617e84af767f33a94f1ddfa7d4883c1a45198f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-20eve: Add PL1 override to 7WLucas Chen
Change PL1 from 4.5W to 7W, based on thermal test results. BRANCH=eve BUG=b:73133864 TEST=Verify the MSR PL1 limitation is set to 7W. Change-Id: Ic3629f9c3b7eb6eef1a1b5a3051c9a11448bc9ad Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28078 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20atlas: enable keyboard backlight supportCaveh Jalali
This adds support for controlling the keyboard backlight over ACPI. BUG=b:112619894 BRANCH=none TEST=verified keyboard backlight can be adjusted using keyboard shortcuts Change-Id: I25713f341e8b5a4e50903ac109bfa717f20969d8 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28205 Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20mb/google/poppy/variants/nocturne: enable eistMatt Delco
Enable Enhanced Intel SpeedStep (EIST) on nocturne. Change-Id: Ie9b832f5bc3a5ef300783bd9bcd7cf5d186b98fa Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20mb/google/eve: enable eistMatt Delco
Enable Enhanced Intel SpeedStep (EIST) on eve. Change-Id: I49b18b817cda570f5c3c4d048c4e03329ac10b87 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20soc/intel/common/block: Move common uart function to block/uartSubrata Banik
This patch moves uart functions which are common across multiple soc to block/uart. This will remove redundant code copy from soc {skylake/apollolake/cannonlake}. BUG=b:78109109 BRANCH=none TEST=Build and boot on KBL/APL/CNL platform. Change-Id: I109d0e5c942e499cb763bde47cb7d53dfbf5cef6 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20nocturne: Enable debouncing of SX9310 CLOSE / FAR IRQsEnrico Granata
This is meant to solve an issue where the proximity sensor may fluctuate between CLOSE / FAR in rapid succession upon the user removing their hand from the unit, before settling on the correct output. Using the hardware debouncing filter solves this issue and removes the spurious fluctuations. BRANCH=None BUG=None TEST=manual on Nocturne, observing events come in Change-Id: I78cc4852d42fcda6209fedce1ce91236b5814571 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/28112 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20mb/google/octopus/variants/fleex: Increase weida touchscreen reset delayCrystal Lin
Weida touchscreen controller needs 130 ms delay after reset BUG=b:111102092 BRANCH=master TEST=Verify touchscreen on fleex works with this change Change-Id: Ia86c3acf3c0e09ca05cc1681113672b546f830a0 Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-20mb/asus/kfsn4-dre: Use common pnp_{enter,exit} functionsElyes HAOUAS
Change-Id: I4b0577bf3c00307733a1096749c1835d86764f29 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-20mb/kontron/ktqm77: Use common pnp_{enter,exit} functionsElyes HAOUAS
Change-Id: Ib5799cceacefa89385a7615ef1c4b4d06157044f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-19google/cyan: Fix ACPI resource scope for Melfas touchscreenMatt DeVillier
Fix scope of ResourceSource, which should match the scope of the device itself. Change-Id: I9d0ff0ecc2721ec55b1ed12dddb495cd55966daf Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/28114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-19mb/lenovo/x1_carbon_gen1: add support for hynix memoryAlexander Couzens
All different memory configuration should be supported by now. Thanks to Igor Lee. Change-Id: Ib93c0e3cbdc29cbf6cff26292df4fbbb8208082f Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: Igor Lee <getrun@gmail.com> Reviewed-on: https://review.coreboot.org/27781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-17arm64: Factor out common parts of romstage execution flowJulius Werner
The romstage main() entry point on arm64 boards is usually in mainboard code, but there are a handful of lines that are always needed in there and not really mainboard specific (or chipset specific). We keep arguing every once in a while that this isn't ideal, so rather than arguing any longer let's just fix it. This patch moves the main() function into arch code with callbacks that the platform can hook into. (This approach can probably be expanded onto other architectures, so when that happens this file should move into src/lib.) Tested on Cheza and Kevin. I think the approach is straight-forward enough that we can take this without testing every board. (Note that in a few cases, this delays some platform-specific calls until after console_init() and exception_init()... since these functions don't really take that long, especially if there is no serial console configured, I don't expect this to cause any issues.) Change-Id: I7503acafebabed00dfeedb00b1354a26c536f0fe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/28199 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-17google/grunt: Update TP/TS/H1 i2c timingsKevin Chiu
After adjustment on Careena EVT TP: 400.0 KHz TS: 396.8 KHz H1: 396.8 KHz BUG=b:112663934,b:112664258 BRANCH=master TEST=emerge-grunt coreboot measure by scope Change-Id: I9eeaf9290d95969a283f14618878e28faf0ea46f Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/28119 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-17mainboard/google/kahlee: Fix ACPI method Not Serialized errorMarc Jones
Fix the following failure from FWTS: FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line 131 Line | AML source -------------------------------------------------------------------------------- 00128| } 00129| } 00130| }) 00131| Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings | ^ | Remark 2120: Control Method should be made Serialized (due to creation of named objects within) 00132| { 00133| Name (RBUF, ResourceTemplate () 00134| { ================================================================================ ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is created inside a non-serialized method - this method should be serialized. It is possible that one thread enters the method and blocks and then a second thread also executes the method, ending up in two attempts to create the object and causing a failure. BUG=b:112476331 TEST= Run FWTS. Change-Id: I6f4f6e7e94b01f673afc97d9415481ee63e406e3 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28122 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-17mb/intel/coffeelake_rvp: Update spd details as per Coffeelake boardMaulik V Vaghela
Update SPD details to match with Coffeelake U RVP board BUG=none BRANCH=none TEST=Boot on coffelake U rvp board and check if memory training is passing and board boots till payload. Change-Id: I953354cf5c6045731262f4f4e9da230187c2d246 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-08-17mb/intel/coffeelake_rvp: Update GPIO table for Coffeelake U RVPMaulik V Vaghela
Update GPIO table as per board schematics. GPIO table for other variants will be added later. Change-Id: Ieb55d160ae2d6bff940840b1fba9411979332d4d Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-08-17Nami: Disable powering off EC on cr50 updateDaisuke Nojiri
Nami doesn't support wakeup from hibernation by CR50. This causes the device to remain turned off after CR50 update. This patch disables turning off EC on cr50 update. CR50 resets the whole system. So, EC reset is not required. Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> BUG=b:112604277 BRANCH=none TEST=gsctool -a -u /media/removable/cr50.bin && reboot Verify EC reboots. AP prints 'Waiting for CR50 reset to pick up update' then reboots. Change-Id: I06f5eb6100e8af6ffec45d4de2b40eff44f89709 Reviewed-on: https://review.coreboot.org/28113 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-16mb/*/*/cmos.default: Harmonise CMOS files syntaxElyes HAOUAS
These files are being updated to match the prevailing style of cmos.default files. Change-Id: I47d31d6fec8c9eb856aed0c63824d9556b7705e4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-16google/grunt/aleena: Update Raydium TS device ACPI nodesTim Chen
change I2C irq to EDGE trigger BUG=b:112616824 BRANCH=master TEST=emerge-grunt coreboot Raydium TS is working. Change-Id: I86ec32bb3f2626e65d76c3259e3c4244a970e5de Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15mb/*/*/cmos.default: Decrease debug_level to 'Debug'Elyes HAOUAS
Used default console log level is 7 in src/console/Kconfig. So let cmos.default use the same level as default. Change-Id: Ia39ee457a8985142f6e7a674532995b11cb52198 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15google/grunt: Remove BayHub EMMC driving strength overrideKevin Chiu
Side effect was observed that after override BayHub EMMC driving strength to the max, EMMC CLK will be reduced to 51.x Mhz from 200 Mhz. This will cause OS installation fail on Samsung EMMC sku. BUG=b:111964336 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I848ab0cae474b15fbc4264c8ade63d5c6b4e489d Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/28084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15mb/google/poppy/variants/nocturne: remove dup'ed dptf_enableMatt Delco
This file contains two instances of "dptf_enable" = "1". This change removes the 2nd instance (it doesn't have an explicit comment like the 1st instance). The dptf devices still seem to be present even with this change, as expected. Change-Id: I890006644be9176ebaf555cc121c816e12f2b596 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-15mb/google/poppy/variants/nocturne: sx9310 to 400kbMatt Delco
The spec of the sx9310 says the I2C interface can handle standard (100kb/s) and fast mode (400kb/s). The current setting is using fast plus (1000kb/s) so this change is reducing the speed to fast mode. I've been using the sensors with this change for a few weeks now, though I also don't recall seeing an issue prior to this change. Change-Id: I337fc02c52565d6ec4d7bac1b3564f65238962dc Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-15Revert "mb/google/poppy/variants/atlas: enable camera power and release reset"Caveh Jalali
This reverts commit 1fdb76945a9d06bbff37dee9da69e13a86c933f4. Camera power is now handled by ACPI rules - no need to force the GPIOs on by default. BUG=b:80106316,b:111141128 Change-Id: Ifefec320884989f106a4b09c956d3a3279a1491a Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28072 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Ping-chung Chen <ping-chung.chen@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-15mb/google/atlas: Add DISPLAY_DCR_EN GPIO pinCaveh Jalali
This defines new GPIO pin for controlling the display panel CABC function. The default value is high (enabled). BUG=b:112154569 Change-Id: I29083ab18e37f929a55b450b143463c67fe0abea Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28070 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-15mb/google/atlas: Update DPTF sensor namesCaveh Jalali
This updates the DPTF sensor names to reflect the sensor locations on the board. BUG=b:75454415 TEST=verified new strings show up in /sys/devices/LNXSYSTM:00/LNXSYBUS:00/INT3400:00/*/description Change-Id: Ibffe6cb361de212ca03e75deaa8c454546d267a5 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28069 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-14src: Remove duplicated 'include <device/device.h>'Elyes HAOUAS
Change-Id: Ia38c6f8d978065090564d449cae11d54ddb96421 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-14mb/google/poppy/variants/nocturne: Update PL1/PL2 for AMLRoy Mingi Park
This patch updates Power Limit (PL) for AML. - PL1 as 5W TDP as POR - PL2 as 18W TDP as POR BUG=None BRANCH=None TEST=Build coreboot for Nocturne board and check default PL1/PL2 TDP. cat /sys/class/powercap/intel-rapl/intel-rapl\:0/constraint_0_power 5000000 (5W TDP) cat /sys/class/powercap/intel-rapl/intel-rapl\:0/constraint_1_power 18000000 (18W TDP) Change-Id: Icb02a8a7c5fcd5e6aee45f14eba540a6b3ed3d67 Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/27427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-14mb/google/poppy/variant/nami: Add TSR2 on DPTFT.H. Lin
Add TSR2 DART/DTRT package BUG=b:110451144 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test image with dptf.dv Change-Id: I3328e17328415f5ebdcf84263e5456e11e55f769 Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-08-14mb/google/octopus/var/bobba: Update GPIO config for bobba bid >= 1Justin TerAvest
This change updates GPIO configuration for bobba boards with id >= 1 This follows the same model as fleex: a. Dynamically update touchscreen power enable GPIO in devicetree. b. Provide default and bid0 tables for GPIO configuration in ramstage. c. Configure WLAN enable GPIO differently in bootblock based on boardid. BUG=b:112354568 TEST=Built firmware for bobba Change-Id: Id4ee4a1815e16ddfe60ed268688a8aaf4fb75579 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/28071 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-14mb/intel/coffeelake: Enable 32MB rom compilation for Coffeelake UMaulik V Vaghela
Coffeelake U has 32MB flash chip support. Adding fmd file and enabling CFL U board's Kconfig to output 32MB rom file. Change-Id: I21431b7ac813781b12b95f80c6f8960a78caf4bc Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27905 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-08-14mb/intel/coffeelake_rvp: Add support for new board coffeelake RVPMaulik V Vaghela
Add support for new board coffeelake RVP. This patch is a copy patch and copies entire coffeelake_rvp folder from cannonlake_rvp. Changes done on top of copy: 1. Change copyright year from 2017 to 2018 2. Rename Cannonlake to Coffelake whenever applicable 3. Update entries in Kconfig and Kconfig.name 4. Rename variant directories to match coffeelake boards Change-Id: Id37bfeb0ae51fd630fec96273216dbb2900782c7 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27904 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/kahlee: Remove unneeded blank linePaul Menzel
Change-Id: I189c981f3334836ab24bbc74491e9b58a2d403a4 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/27921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13mb/intel/cannonlake_rvp/Kconfig: Don't redefine firmware pathsArthur Heymans
The paths defined in southbridge/intel/common/firmware/Kconfig should work just fine. Change-Id: Iaa780d9b3080416c6b1a7f24d97ecb8214962405 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28012 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13soc/intel/broadwell/Kconfig: Clean up redefined config optionsArthur Heymans
All broadwell board set HAVE_IFD_BIN to default n, overloading the option in soc, therefore just use the defaults in sb/intel/common/firmware. Change-Id: I250dbbc9d61ecedc1a1eb48751ad966732604349 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28011 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/rambi: Don't set defaults for HAVE_IFD_BINArthur Heymans
There is no need set the default HAVE_IFD_BIN explicitly to n. Change-Id: I4a5fe45e7f8f6dd018937861b0fb92a8da49904e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28008 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13sb/intel/lynxpoint/Kconfig: Clean up redefined config optionsArthur Heymans
There is no need to redefine option present in southbridge/intel/common/firmware/Kconfig. Change-Id: I9999440031b07006e2df11e00dfb9f3dbe04f832 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28007 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13fsp_broadwell_de: Increase CONFIG_MAX_CPUS to 32Samuel Jimenez
Fix to accomodate for boards with more than 16 cores. Change-Id: I35b61d94491c21ef76717f761e566ca815880f27 Signed-off-by: Samuel Jimenez <aerojsam@gmail.com> Reviewed-on: https://review.coreboot.org/27847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13src: Get rid of non-local header treated as localElyes HAOUAS
Change-Id: I2c5edadfd035c9af08af9ee326a5a2dc8b840faa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13src/mb: Remove some unneeded includesElyes HAOUAS
Change-Id: I3108193c0e0b644cecb74ae0c7a7b54e24a75b58 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13mb: Get rid of unneeded include <cbmem.h>Elyes HAOUAS
Change-Id: I80dd65484fd52e9048635091fb20a123e959e999 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27869 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13google/bobba: Add Raydium touch screen supportPan Sheng-Liang
Current coreboot does not create ACPI device for OS to recognize Raydium touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=none BRANCH=master TEST=emerge-octopus coreboot Change-Id: Ic61a69e19e97520da0702dfe6cb7496563fc34f4 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-13mb/intel/dg43gt: Enable the GBEArthur Heymans
This was blindly copied from logs created under vendor BIOS in non-descriptor mode which apparently set LAND in BUC. Change-Id: I94c917600421ee742ece7f6f71309da80261da28 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-08-13mb/google/poppy/variants/nocturne: remove icc_max overridesNick Vaccaro
Remove icc_max overrides to allow SoC code to set proper icc_max based on CPU SKU. BUG=b:78122599 BRANCH=none TEST='emerge-nocturne coreboot chromeos-bootimage', flash to nocturne, boot to kernel and verify device doesn't hang after a few minutes. Change-Id: I37c44e2428b802d754f2b12b8a57601d257e6582 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27996 Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/poppy/variant/nocturne: update PL2 based on CPU skuNick Vaccaro
This patch adds a function to overwrite PL2 setting based on CPU sku. From doc #594883, PL2 is 18W for AML-Y. BUG=b:110890675 BRANCH=None TEST=emerge-nocturne coreboot chromeos-bootimage & test with AML-Y and KBL-Y skus. Change-Id: Idfdc0c2434fdef56a7c25df05e640837a5096973 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27997 Reviewed-by: Caveh Jalali <caveh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/poppy/variant/atlas: Update PL2 based on CPU skuGaggery Tsai
This patch adds a function to overwrite PL2 setting based on CPU sku. From doc #594883, PL2 is 18W for AML-Y. BUG=b:110890675 BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage & test with AML-Y and KBL-Y skus. Change-Id: I468befcd2c4ad6c2bb9ae91b323a43f87ff65a26 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27765 Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/octopus/variants/fleex: Set up DPTF tableJohn Su
Follow thermal table (b:112274477 comment#1) for first tunning. BUG=b:112274477 TEST=Match the result from DPTF UI. Change-Id: I63b2e50a4f6fc5453e6564e277600498ac0e6244 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-08-13mb/google/octopus: Enable SAR config for Intel 9560 moduleJohn Zhao
Enable the GEO SAR feature for Octopus. Program wifi_sar VPD key. coreboot reads the VPD and creates the ACPI table as per the WGDS spec. BUG=b:112288077 TEST=Program VPD key, extract acpi table ssdt and valiate WGDS entry. Change-Id: I40a6fd9e0ec8b440996bf3389322fd89bcca15a4 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-12mb/google/octopus: Do not configure IOStandby for WLAN_PE_RSTFurquan Shaikh
PERST signal is asserted/deasserted by ACPI routines during suspend/resume. Configuring IOStandby for WLAN_PE_RST can result in failure to resume from suspend state with wake-over-WLAN. This change removes the IOStandby configuration for WLAN_PE_RST. BUG=b:112371978 Change-Id: Ic7c0b2aa144233f8bbb4e5169d96347a1290abe1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-12mb/google/octopus: Configure WiFi wake as NC when using CNViFurquan Shaikh
When CNVi is being used, external wake using GPIO_119 is not required. This change configures GPIO_119 as PAD_NC if CNVi is taken out of reset. BUG=b:112371978 Change-Id: Ifee90f428ed43c4d7c612c170476aff43b4a33ce Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-12mb/google/octopus: Use correct chip for CNVi deviceFurquan Shaikh
This change uses drivers/intel/wifi chip for CNVi device to ensure that: 1. Correct device name shows up in ACPI node 2. It is possible to pass any parameters from devicetree to wifi driver for SSDT generation. BUG=b:112371978 Change-Id: Ia49820dd4f9cf2e0a9ef14931fbddd8a723208c0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-12mb/google/octopus: Dynamically disable CNVi/PCIe deviceFurquan Shaikh
This change checks to see if CNVi module is out of reset: 1. If yes, then PCIe device for WiFi is disabled. 2. If no, then CNVi device is disabled. BUG=b:112371978 Change-Id: I6e6cf2e646c897df017913056db87ac0cffa1a8e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-08-12mb/google/octopus: Disable unused I2C2 in devicetreeFurquan Shaikh
I2C2 is unused on all octopus variants. This change disables it in devicetree. BUG=b:112458032 Change-Id: I55abef864c06a448011f9570d3e6c0aa8bfdc5bc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28016 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-12mb/google/octopus/var/fleex: Update GPIO config for fleex bid >= 1Furquan Shaikh
This change updates GPIO configuration for fleex boards with id >= 1 This follows the same model as phaser: a. Dynamically update touchscreen power enable GPIO in devicetree. b. Provide default and bid0 tables for GPIO configuration in ramstage. c. Configure WLAN enable GPIO differently in bootblock based on boardid. d. Disable unused I2C devices in devicetree. BUG=b:112458032 TEST=No errors observed on boot-up on fleex. Change-Id: Ib4c449168b08e2393e2395d6b49469be5599c2ce Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-12mb/asus/maximus_iv_gene-z: Add VBTTristan Corrick
The file `data.vbt` matches the VBT in the latest version of the vendor firmware (version 3603). Tested with Linux 4.9 and everything works as expected. Change-Id: I8e3b1d274ac0df63989d966f477013e780611fa1 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/28050 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-10drivers/i2c: Add i2c TPM support for different stagesPhilipp Deppenwiese
Change-Id: Ib0839933f8b59f0c87cdda4e5374828bd6f1099f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-08-10mb/google/octopus: add support for new shared memory configAaron Durbin
Allow for shared dram configuration by introducing a new table that collapses the common settings after removing the part numbers. When employing this scheme the part number comes from CBI. BUG=b:112203105 TEST=Placed part number in cbi. Faked out memory sku id. And enabled DRAM part num always in cbi. Everything checked out. Change-Id: I5229695ce3eb686421b89ac55d8df4b9fcec705c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-10mb/gigabyte/ga-{h61m-s2pv,b75m-d3h,b75m-d3v}: Clean up CMOS filesAngel Pons
Options that were deemed unneceesary on other code reviews have been removed from the layout files. In addition, the checksummed range has been extended to cover sata_mode and gfx_uma_size. Change-Id: Id9e904f447809231806a786e39ed638f21e1bc5a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-08-10mb/gigabyte/ga-{h61m-s2pv,b75m-d3h,b75m-d3v}: Clean up mainboard codeAngel Pons
I ported ga-h61m-s2pv based on the two Gigabyte b75m boards. Based on another mainboard's code review comments, this patch improves the code quality of these three similar boards. ga-h61m-s2pv is tested and confirmed to be working, but I cannot say the same regarding the other two mainboards as I do not have them. Change-Id: Ib7747cceb5ba56f791677204cdc4c54c129c70c3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-08-10google: Remove board 'rotor'Julius Werner
Rotor is dead, long live [PROJECT NAME REDACTED]! Change-Id: Ia9308944257255e077a44c1df262c7f49c69890c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27964 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09mb/google/octopus: add support for fetching DRAM part number from CBIAaron Durbin
Add 3 new Kconfig options: DRAM_PART_NUM_IN_CBI DRAM_PART_NUM_ALWAYS_IN_CBI DRAM_PART_IN_CBI_BOARD_ID_MIN These control whether to 1. attempt to use CBI at all 2. always use cbi and 3. conditionally use cbi based on board id. The intent is that the MIN variant would be used for the tranisition period then cut over to ALWAYS after full transition. Since multiple OEMs have different schedules these options are there to bridge the gap. yorp. bip, and octopus build targets would never flip DRAM_PART_NUM_IN_CBI, but in case someone does the MIN values are 255 to always take the old path. BUG=b:112203105 TEST=Set correct part number on phaser during testing. Change-Id: If9a0102806d78e89330b42aa6947d503a8a2deac Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-09src/mainboard: Fix typoElyes HAOUAS
Change-Id: Ief6a04ccb63658b5fb03cd1d298bf00948cf7410 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09google/grunt: Override BayHub EMMC driving strengthKevin Chiu
Careena EVT SanDisk EMMC sku has high fail rate of 0x5B reboot failure. It'll need to increase 1.8V EMMC CLK/CMD, Data driving strength for this issue. CLK[6:4] CMD,DATA[3:1] original register value: 0x6B enhanced: 0x7F BUG=b:111964336 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I3db38ff12c566c258895c6643008a0472ca528bb Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27816 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09mb/google/octopus: remove disable_periodic_retraining optionsAaron Durbin
The Micron material that was broken has long since been fixed that required this option. glkrvp had these stale entries and were subsequently copied to octopus. Remove the need for this option. BUG=b:35581751 Change-Id: Id73584367c2ad0e4958b5ea0f04a28e5fc82d085 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27959 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09mb/google/poppy/variants/atlas: Do not override icc_maxCaveh Jalali
Skylake SoC code now sets the icc_max based on the CPU SKU, so we should not hard-code it in the device tree. BUG=b:110890675 BRANCH=None TEST=boots on atlas Change-Id: I7eb3499b7bea9ab2c49e1f299e2dbb688c8d1c33 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
2018-08-08mainboard/google/kahlee: Set SYSTEM_TYPE_LAPTOPRaul E Rangel
This configures the ACPI FADT perferred power management profile to PM_MOBILE instead of PM_DESKTOP. I'm not sure what impact this actually has. I just noticed the other boards have it set. BUG=b:110971913 TEST=Made sure SYSTEM_TYPE_LAPTOP shows up in coreboot.config Change-Id: Iea1b8359b80d167e69745358f543f025713294ba Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08mb/intel/cannonlake_rvp/devicetree: Remove spurious CPP directivesArthur Heymans
The devicetree is not run through a C pre-processor, so remove it. Change-Id: I161be45b2035f3a8724bf3217260e7571c429da8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27927 Reviewed-by: Naresh Solanki <naresh.solanki.2011@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-07mb/google/poppy/variants/nautilus: Set CABC_EN to GPO high before EDP power onSeunghwan Kim
If GPP_E22(CABC_EN) remained floating GPI(SoC default) at V3.3_DX_EDP on, it may cause damage on the GPIO pad. To prevent, we would set this pad to GPO on romstage before EDP power on. Since we need to cover all systems in market, I put it into romstage instead of early_gpio_table. BUG=b:111860510 BRANCH=poppy TEST=Verified CABC_EN is set to GPO high 5ms before EDP power on Change-Id: I34e2fe86329a88eb05e0ea3c6beac6a64754b41e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-07mb/google/poppy: Add variant callback for romstage GPIO configurationFurquan Shaikh
This change adds variant callback to get GPIO configuration table in romstage and configures these GPIOs before memory training is performed. BUG=b:111860510 BRANCH=poppy Change-Id: I1eb51356fb3f4c0f4ff29b22dbcde6dbece303ad Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07mb/google/poppy/variants/nautilus: Add SKU info to SMBIOSFurquan Shaikh
This change provides implementation of smbios_mainboard_sku() to add proper "skuX" string to SMBIOS table 1. BUG=b:112163362 TEST=Verified "dmidecode -t 1" reports skuX correctly. Change-Id: I7e42d2c80d791ea7170d066d2eeaa0c6811eb9c9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-06mainboard/google/kahlee: Add PSPP override settingMarc Jones
Add default PSPP AGESA setting for Kahlee/Grunt mainboards. BUG=b:112020107 TEST= build test Change-Id: I8a8605402379de88a04f3a16553c308513fa1531 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06google/grunt: Move PSP_SELECTABLE_SMU_FW to socRichard Spiegel
Now that an updated bootloader with important fixes is available at coreboot repository, all stoneyridge boards should use it. Move the selection of SOC_AMD_PSP_SELECTABLE_SMU_FW from mb/google/kahlee to soc/amd/stoneyridge. BUG=b:111428800 TEST=Build and boot grunt. Change-Id: Idf8e348efbc85569aa1163125f412c5242c46eb4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27844 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-06mb/google/octopus/variants/baseboard: Update Power Limit1Sumeet Pawnikar
Update power limit1 value from 8W to 10W. There is an error in the energy calculation for current VR solution on GLK. Experiments show that when power limit1 set to 10W, gained performance improvement with SoC TDP reaches max (6W) power. BUG=b:79779737 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: Ic320d442e7401e4be2e8e16d691db4c803f0fdc1 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/octopus/variants/fleex: Enable Weida touchscreen deviceCrystal Lin
This change adds ACPI properties for WDT8752A device. BUG=b:111402335, b:111102092 BRANCH=master TEST=Verify touchscreen on fleex works with this change Change-Id: Id186d5b87343007ae7e631d5d27464ee27e5b27d Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add rammus devicetree.cbZhuohao Lee
Use the default value for Iccmax which is specified in vr_config.c. The AcLoadline and DcLoadline keep the poppy value. Besides, the USB 2.0 ports located on the mainboard are set to USB2_PORT_SHORT and the others on the daughterboard are set to USB2_PORT_LONG. Those setting need to be fine tuned later. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: Icabfac04c94b3d480872c243d811509e274ef122 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add gpio settingZhuohao Lee
The gpio setting is based on the proto board schematics BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I20fc081d372b8686f6128a7e85276f9c6798b199 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add memory configurationZhuohao Lee
Add memory configuration based on the proto board schematics BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I45efdc7893b5bcbca0de6e932e1452cc1a2ff028 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add audio, mic and codec configurationZhuohao Lee
Rammus uses DA7219 Headset, Maxim MAX98927 Smart Amps and 4 channel dmic BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: If21a3870ee4b000a776d2f3e025fb43ef2fe48c7 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: change build directory to rammusZhuohao Lee
Move the build board directory from poppy to rammus. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I3a9fc2bbfe7261661f0c5c073baff0ff1434d09f Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/kahlee: Disable SATA in all boardsRichard Spiegel
Kahlee based boards don't use SATA, so disable SATA on all boards to save power. BUG=b:112139043 TEST=Build and boot grunt, checked the absence of SATA PCI. Change-Id: I6a12c03a5a95b1c8b40609a3fe656df92548b80b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>