summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2018-05-02mb/google/octopus: Configure pins to reflect delta w.r.t yorpShamile Khan
Changes in pin usage between yorp and bip - LTE_OFF_ODL pin moved from GPIO_161 to GPIO_66 - I2S0 interface is not used in bip. It was used in yorp for DMIC Wake on Voice through Nuvoton EC. Also fix both bip and yorp pin settings for LTE_OFF_ODL (Enable LTE and add an internal pull up). Internal pull up can be removed later when sub-board (which will have an external pull up for this signal) is available. BUG=b:77869623 BRANCH=none TEST=Build coreboot for octopus. Change-Id: I8907bd63a43c4bc51ca991c3ec7c1cae9e39e2d1 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/25804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-01asrock/b75pro3-m: fix the HDMI portIru Cai
At the time I ported coreboot to this board, the HDMI port of my board was broken, so I couldn't test libgfxinit on HDMI. Change-Id: Ibb8a4ef55bd97fd2d0baacdbc72863c0985d3d76 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/25820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-05-01mb/google/poppy: Add variant for nocturneNick Vaccaro
Add a new variant of poppy for the nocturne board. Key differences from baseboard include: - GPIO changes - devicetree.cb changes - memory stuffing option changes BUG=b:78122599 BRANCH=none TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: I11c7829041b3c45407c17f71b08cc7fc17f717e8 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/25803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-01mb/google/poppy/variants/nami: Enable Synaptics touchpadivy_jian
BUG=b:74595037 TEST= 1. emerge-nami coreboot chromeos-bootimage 2. check touchpad function 3. evtest /dev/input/event5: PNP0C50:00 06CB:CD84 Change-Id: I47cb1b13881f0d52860f0afe4bbca7483409de54 Signed-off-by: ivy_jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25913 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-01nb/intel/x4x: Change memory layout to improve MTRRArthur Heymans
This change also makes sure that the sum the uma regions (TSEG, GSM, GSM) is 4MiB aligned. This is needed to avoid cbmem_top floating between 2 usable ram region, since cbmem_top is aligned 4MiB down to easy MTRR setup for ramstage. At least tianocore requires this and fails to boot without it. Better MTRR are achieved by making the memory 'hole' till 4GiB exactly 2Gib. This code mimics how it is done in nb/intel/gm45 and achieves similar results. TSEG is enabled and set to 8M since this makes it easier to reuse the common smm setup / parallel mp code and makes it possible to cache the ramstage in there like how it's done on newer targets. TESTED on Intel DG43GT. Change-Id: I1b5ea04d9b7d5494a30aa7156d8c17170e77b8ad Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-01mainboard/hp/dl145_g3: Fix coding styleElyes HAOUAS
Change-Id: I78b43cbc052e6d243d67ca8cdd86b242e477a2c7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23532 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-01chromeec platforms: Update ACPI thermal event handler callMartin Roth
Currently the thermal event handler method TEVT is defined as an extern, then defined again in platforms with thermal event handling. In newer versions of IASL, this generates an error, as the method is defined in two places. Simply removing the extern causes the call to it to fail on platforms where it isn't actually defined, so add a preprocessor define where it's implemented, and only call the method on those platforms. Change-Id: I64dcd2918d14f75ad3c356b321250bfa9d92c8a5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/25916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-30mb/lenovo/x220: Allow optional use of the mrc.binArthur Heymans
Besides the FSP codepath, Sandy Bridge has two codepaths, one native and one in the form of a binary. This allows the use of the binary. This can be useful to find flaws in the native raminit. The native raminit is still selected by default. Change-Id: I2d71fb7bc5f7b0976157be146c0e4c39a3ed5602 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-04-30asrock/b75pro3-m: use the ASPM blacklist driverIru Cai
After commit 2188f57a (src/device: Update LTR configuration scheme) coreboot will hang when reading resources on the ASMedia SATA controller, although there is already an ASPM config override. So use the ASPM blacklist driver instead of setting the ASPM override in the devicetree. Change-Id: I807d9bd4deef8c1528dff96c7646240ef75e1953 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/25819 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-30google/poppy: enable trackpad as wake sourceCaveh Jalali
This configures GPP_A23 as a wake source for the trackpad. We also need to set up GPP_A GPE0_DW0, thus evicting GPP_B. We don't have any interesting signals in GPP_B, so we won't be missing it. I don't have hardware with A23 wired up, so i just tested the wake source using A19 which is essentially identical to A23. BUG=b:78541883 TEST=verified we can trackpad can wake system from suspend Change-Id: If800464c8b2319d758b1823850571919f85bdc6c Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/25850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-30cubieboard/qemu-armv7/am335x: Add fake TTB region for consistencyJulius Werner
All ARM architecture boards are supposed to have a TTB region for their page tables. ARM systems cannot use the data cache without enabling paging, so it is imperative to do that as soon as possible. They will also fault on unaligned accesses when not using the cache, which breaks assumptions in CBFS code. Unfortunately, we have some old boards in various stages of disrepair in the tree that don't always follow these sorts of standard conventions. It's not clear whether they actually boot anymore and if anyone still has the respective hardware available to maintain them. I cannot really fix and test them right now, but we should at least create a fake TTB section for them so that common architecture code may make the correct assumptions about which regions exist. Change-Id: I51aa259fbb7a9c0ade72db905b1762c1c721f387 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/25903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-30mb/google/octopus: Create phaser variantJustin TerAvest
This creates a phaser variant for octopus. Nothing is set in the variant files here; everything is picked up from baseboard. BUG=b:78572180 TEST=None Change-Id: Ia03e8af91741f1f7aa3a42ac28688b8b6a708932 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-30mb/google/octopus: save dimm info as SMBIOS Table-17Ravi Sarawadi
Save FSP provided memory HOB info as SMBIOS Table-17 format. Firmware tools such as mosys, dmidecode uses SMBIOS Table-17 to report memory metadata. BUG=b:78651920 TEST=Build for Octopus and check 'dmidecode -t17' and 'mosys memory spd print all' to verify dimm info. Change-Id: I9b032b766a2927725b2378f7f720644d4459f602 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/25881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-30mb/google/octopus: Fix crossystem wpsw_cur errorHannah Williams
With only one entry for Write Protect gpio in the OIPG package, the sysfs entry /sys/devices/platform/chromeos_acpi/GPIO.x is created as "GPIO" instead of "GPIO.x". This was causing crossytem to return error for wpsw_cur. BUG=b:78009842 Change-Id: Ica60f342420d95d09a45580f2f940443c03601de Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/25892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-29pcengines/apu2: remove TPM from devicetree for apu3Piotr Król
There is no physical LPC connector on apu3 mainboard. This board contains only LPC debug test points with not all required pins exposed. Change-Id: I83de16bb651846340788c6fa52c04b8e09e46a99 Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/22630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-04-29mainboard/amd/olivehillplus: Fix coding styleElyes HAOUAS
Change-Id: I489780d205e0784914063454c6071b046df6cc30 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-29mainboard/amd/serengeti_cheetah: Fix coding styleElyes HAOUAS
Change-Id: I380368873e0508c3a55ac1c4ea0de172e675cf3a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-29mainboard/msi/ms9652_fam10: Fix coding styleElyes HAOUAS
Change-Id: I8d6f738d358a0a3d4b602a2a607143d98f4710ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-29mainboard/msi/ms9282: Fix coding styleElyes HAOUAS
Change-Id: I6fb31238afff56ff16cf58104f8bed8e9832544c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-29mainboard/biostar/am1ml: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: Ic1ea93ec54f6ca52e1af8ff09998b8859358b5a0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-29mainboard/hp/dl165_g6_fam10: Fix coding styleElyes HAOUAS
Change-Id: I3e3bb9a0e9670fca67016523eac437140ff03188 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-29mainboard/gigabyte/ga_2761gxdk: Remove unnecessary braces {}Elyes HAOUAS
Fix coding style Change-Id: Id1c7104eb8520f20c826f5936029739a093d4dba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-28mainboard/asus: Add spaces around '=='Elyes HAOUAS
Change-Id: I559e71ddc71115167ea4fa380c3c48ac68154f86 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25855 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-28mb/google/octopus: Enable pull on ESPI_IO1 lineFurquan Shaikh
This change configures a weak internal pull-up on ESPI_IO1 line for octopus baseboard and variant bip. ESPI_IO1 is used as ALERT# line and is expected to be open-drain. However, there is no external pull on this line and so an internal pull-up is required to ensure proper eSPI communication. BUG=b:78497502 TEST=Verified that there is no eSPI communication failure between AP and EC during boot-up and on suspend/resume. Change-Id: Ic494aa7397b94bfd233ce10da8287660997b3377 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Hannah Williams <hannah.williams@intel.com>
2018-04-27siemens/mc_apl1: Move board specific things to mc_apl1 variantMario Scheithauer
The following things are specific characteristic of mc_apl1 board variant: - initialization for the eDP to LVDS converter - enable decoding address range for COM 3 - legacy IRQ routing for PCI devices - wait function for old legacy devices - set coreboot ready LED Change-Id: I5c853e6caae6cc880ead436f232cabddeee6d09a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/25822 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-27google/kahlee: Remove VBOOT_VBNV_CMOSMarc Jones
Remove VBOOT_VBNV_CMOS from the mainboard. It is selected in the stoneyridge Kconfig. BUG=b:77347873 TEST=Manually clear CMOS and check coreboot restores VBNV from flash. Change-Id: I30e517e06ab9d8f7d4a93bf82f12726756c44966 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/25844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-27google/kahlee: Add RW_NVRAM to FMAPMarc Jones
Add RW_NVRAM area to FMAP for VBOOT_VBNV_CMOS_BACKUP_TO_FLASH support. BUG=b:77347873 TEST=Manually clear CMOS and check coreboot restores VBNV from flash. Change-Id: Id8c6f54634b94bf6ae3755a827e80d0862a42dd2 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/25843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-27mb/lenovo/x1_carbon_gen1/spd: remove trailing whitespaceElyes HAOUAS
Change-Id: Ic81a172cdeb6c0dca396312393897613c1c51191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-04-27mb/pcengines/apu2/spd: Remove unneeded whitespaceElyes HAOUAS
Change-Id: I0c59cefa4067d3fc01b8425184e10d3caf1c81ac Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-04-27RISC-V boards: Remove PAGETABLES section from memlayout.ldJonathan Neuschäfer
RISC-V doesn't set up page tables anymore, since commit b26759d703 ("arch/riscv: Don't set up virtual memory"). Change-Id: Id1e759b63fb0bc88ab256994d3849d16814affa0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-04-27mb/google/poppy,soraka,nautilus: Enable xDCIFurquan Shaikh
This change enables xDCI controller on poppy, nautilus and soraka. BUG=b:78577893 BRANCH=poppy Change-Id: I9b0f81bda889b822479ead4d1acc2b613151a304 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25849 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-26mainboard/google/kahlee: Set SPI speed in bootblockMarc Jones
Set the SPI speed for Normal, Fast, AltIO, and TPM in bootblock. This setup is needed when moving AGESA out of the bootblock. It sets the SPI bus speed of the TPM access in verstage. BUG=b:70558952 TEST=Boot with AGESA moved out of the bootblock. Change-Id: Ida77d78eb1f290e46b57a46298400ed6c8015e2c Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/25756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-26mb/google/octopus: Add dptf.asl in dsdt.aslSumeet Pawnikar
This patch enables dptf for Octopus by adding dptf.asl in dsdt.asl. BUG=b:74263914 BRANCH=None TEST=None Change-Id: I7194cdd2af88ff062ebcc92cc97b3cdc3d21ecd6 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/25809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-26mb/google/grunt: Add grunt touchpad wake GPE to devicestreeDaniel Kurtz
The grunt touchpad interrupt can be used as a wake source. For grunt, the touchpad interrupt uses GPIO5 which corresponds to GEVENT7. BUG=b:77602771 TEST=In OS: # cat /proc/acpi/wakeup => D015 S3 *enabled i2c:i2c-ELAN0000:00 TEST=powerd_dbus_suspend, touching touchpad (> 1 sec) wakes from S3. Change-Id: I510642108a1257f6601f18c77cf3107573427f39 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/25827 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-26mainboard/google/kahlee: Enable EC wake on GPIO24Daniel Kurtz
The grunt EC uses GPIO24 (EC_PCH_WAKE_L) to signal wake-up events to the AP. On Stoney, GPIO24 maps to GEVENT (GPE) 15. The kahlee EC uses GPIO2 (EC_PCH_WAKE_L) to signal wake-up events to the AP. On Stoney, GPIO2 maps to GEVENT (GPE) 8. BUG=b:78461678 TEST=powerd_dbus_suspend, tap any key on keyboard wakes from S3. TEST=sign in, EC: lidclose, EC: lidopen => system wakes from S3. Change-Id: Ib1809740837e686992ff70b81933159a5dff7595 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/25816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-04-26mainboard/google/kahlee: Fix EC_SMI_GPIDaniel Kurtz
On the kahlee variant, EC_SMI_ODL is connected to GPIO6, which uses GEVENT 10 (GPE10). Fix this up, and also clean up the EC_*_GPI definition format a bit to match the format in the baseboard/gpio.h. BUG=b:78461678 TEST=build coreboot for kahlee Change-Id: I9445efbc02559c2a7c90f67bcb0154b04b03a1aa Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/25826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-04-26mb/lenovo/x200: Use acpi_s3_resume_allowed()Paul Menzel
Apply commit 12d681b2 (intel/i945 gm45: Use acpi_s3_resume_allowed()) also to the Lenovo X200. Change-Id: I4e1e0ccf2abbe175c0e5ddcbb6ee7bf6afb1ae88 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/25793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-04-26mb/sifive: Add HiFive Unleashed mainboardJonathan Neuschäfer
Change-Id: I52ef2da9148809923c90178a00ba94babba8d2f8 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-04-26src/mainboard/ibase/mb899: Fix typo in commentElyes HAOUAS
CR 24h Bit 0 is PNPCVS. Change-Id: Ia79a42ed60e82a84b60f254a0895ec52c1fcda0b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23790 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-26siemens/mc_apl1: Provide baseboard and variant conceptsMario Scheithauer
Siemens will provide further boards based on Apollo Lake. These differ only slightly. To avoid copying the complete directory of the reference board we simply create variants that only contain the differences, like google/reef does. To further the ability of multiple variant boards to share code provide a place to land the split-up changes. This patch provides the tooling by using a new Kconfig value, VARIANT_DIR, as well as the Make plumbing. The directory layout with a single variant mc_apl1 (which is also the baseboard) looks like this: variants/baseboard - code variants/baseboard/include/baseboard - headers variants/mc_apl1 - code variants/mc_apl1/include/variant - headers New boards would then be added under their board name within the 'variants' directory. No split has been done with providing different logic yet. This is purely an organizational change. Change-Id: Ia3c1f45daee3b9690a448b82edbeec552ee05973 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/25785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-04-25mb/google/octopus: Disable PCIE NPK deviceShaunak Saha
This patch sets the NPK device off for octopus. BUG=b:76115112 TEST=Build for Octopus and check that the logs do not report "PCI: 00:00.2 not found, disabling it". Change-Id: I3ac01f90cf946b019a6604a38dd1d6782f8d5759 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/25801 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-25util/riscvtools: Rename to util/riscv/Jonathan Neuschäfer
There's no good reason to use the more complicated name. Change-Id: I515e2df3b87580ddd31d18fe63451a98e92ead61 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25700 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-24mb/google/kahlee/variants/baseboard/gpio.c: move all non-critical gpiosRichard Spiegel
When GPIO tables were created, there was no study on which pins had to be programmed ASAP and which could be programmed later. Execute such study and move all non-critical gpios from reset to late. BUG=b:76097508 TEST=Build and boot grunt to OS, test OS for lost functionality (WIFI, video playback, track pad, keyboard). Change-Id: Icbc9370050d619800026035caaac3e89536a460a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-24mb/google/cyan/spd/spd.c: Fix module part number transferRichard Spiegel
With the increase of dimm->module_part_number size from 19 to 21 (commit 35b273eea3) "include/memory_info.h: Change part number field from 19 bytes to 21", this code is now advancing outside DDR3 SPD designated space. The correct size is already defined as LPDDR3_SPD_PART_LEN, use it. Also make sure to 0 terminate the string. BUG=b:77943312 TEST=Build cyan. Change-Id: Iba0ef4149acfc09b7672fce079df06bf1a01dff6 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-24compiler.h: add __weak macroAaron Durbin
Instead of writing out '__attribute__((weak))' use a shorter form. Change-Id: If418a1d55052780077febd2d8f2089021f414b91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-24mainboard/emulation/qemu-i440fx/fw_cfg: fix checksum for ACPI tablesOleksii Kurochko
Current patch fixes problem with validation of ACPI in Linux kernel: ACPI BIOS Error (bug): A valid RSDP was not found (20180313/tbxfroot-210) 1. function acpi_checksum() returns u8, so seems that is not good idea to use write_le32(). 2. at least RSDP (https://wiki.osdev.org/RSDP#Validating_the_RSDP) has u8 checksum. Change-Id: I1fb29ef4e58982aab0c54b1f715c5658d2a663d8 Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com> Reviewed-on: https://review.coreboot.org/25753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-24mb/google/poppy/variants/nami: Add keyboard backlight supportZhuohao Lee
This change adds keyboard backlight feature for Nami platform BUG=b:78360907 BRANCH=none TEST=keyboard backlight works when EC reports correct info. Change-Id: I3fceb83e155032b6e9f1763c4e2a29e7521269d2 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/25782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-23mb/google/poppy/atlas: Enable trackpadCaveh Jalali
This enables the i2c trackpad on atlas. BUG=b:75454415 TEST=able to move pointer using trackpad Change-Id: If4a82aa605ec68fd38e52c13406eaf803f9e86cc Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/25759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-21mb/google/bip: Add GPIO configuration settingsShamile Khan
These settings are identical to yorp settings except overrides are not provided for sleep_gpio[] table which is currently empty for yorp and cros_gpios[] table which is not expected to change for bip. BUG=b:77869623 BRANCH=none TEST=Build coreboot for bip. Change-Id: Icc205f576691427d78c9159dfdbced87e41a0517 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/25741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-20pci: Move inline PCI functions to pci_ops.hPatrick Rudolph
Move inline function where they belong to. Fixes compilation on non x86 platforms. Change-Id: Ia05391c43b8d501bd68df5654bcfb587f8786f71 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25720 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-20soc/amd/stoneyridge/include/soc/southbridge.c: Rename gpio structureRichard Spiegel
The GPIO definition structure has evolved to a point where it's no longer specific to stoneyridge, though probably still specific to AMD. Therefore, rename the GPIO declaration structure removing stoneyridge from it. BUG=b:72875858 TEST=Build kahlee, grunt, gardenia. Change-Id: Ib034d3f7840c36ee8f5c5384241d7326d3fe5543 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25726 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-19mb/google/octopus: Select DRIVERS_I2C_HIDFurquan Shaikh
This change selects DRIVERS_I2C_HID which is required for adding SSDT node for digitizer. BUG=b:78099046 Change-Id: I526c0ac7b88dec7b2b22d022d911840555f15cde Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-18soc/amd/stoneyridge/include/soc/gpio.h: Remove vendor code referenceRichard Spiegel
With the exception of code that deals directly or indirectly with AGESA, all other code should be independent of vendor code reference. Therefore, remove vendor code reference from any GPIO code. BUG=b:77999987 TEST=Build and boot grunt. Change-Id: I9ba78767a269ad6b9b06fa11993d8a12350e4bad Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25695 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-18mb/google/kahlee/variants/kahlee/gpio.c: Convert GPIO to new formatRichard Spiegel
As part of preparing to make GPIO code independent of vendor code references, convert GPIO table format using newly defined macros. BUG=b:77999987 TEST=Build and boot kahlee. Change-Id: I0af768bb4dbcbfef0d2d08ffe869c1dfb6827974 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-18mb/google/poppy/variants: Set VmxEnable to 1Furquan Shaikh
This change sets VmxEnable to 1 to match the kernel setting. If this feature is enabled at the kernel level and not in FSP, then there is an issue where FSP expects it to be disabled so it forces a cold reboot on every warm reboot. BUG=b:78129261 BRANCH=poppy Change-Id: Idedbde1d8eb0c9e959733b7b50e5dec804d61cae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25698 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-17mainboard/google/kahlee: Add EC back into grunt devicetreeMartin Roth
The EC code should not have been removed from devicetree when moving over from grunt. This was causing various bewildering issues that would happen on the first boot but not on subsequent reboots. BUG=b:73235377 TEST=Grunt powers off and stays powered off at dev screen. Change-Id: I225138fede66c6e189e0e79d1261d0d579f7cbdc Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/25690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-04-17mainboard/google/kahlee: Update EC pins from GPIOs to GPEsMartin Roth
The EC pin definitions are GPEs, not the GPIO numbers. BUG=b:74022675 TEST=Power status updates immediately when power is inserted. Change-Id: Icc8330a606f7a85e72b65094462a684927986829 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/25689 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-17mb/google/poppy/variants/nami: Update GPIOsShelley Chen
Updating some GPIOs based on changes in the latest schematics. Also renaming signals to match that of latest schematics. BUG=b:73749640 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Make sure different SKUs still boot. Change-Id: I7d912f4bc6765f065c75c68a45bdf9ee844e0c1d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/25646 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-17mb/google/octopus: Enable Yorp EC software syncJustin TerAvest
With one additional EC change, Yorp is able to flash the EC as part of software sync and successfully boot. This change is only made for Yorp as we want this disabled for Bip bringup. BRANCH=none BUG=b:77874283 TEST=Successful flash and boot on Yorp with this change TEST=Checked GBB flags on Yorp and Bip images with gbb_utility CQ-DEPEND=CL:1014397 Change-Id: I4969b254c6a58fba9dd8d2f31feb25b55c7a0c65 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25692 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-17cbfs: Add cbfs_boot_load_file()T Michael Turney
Generalize cbfs_boot_load_struct() by passing in CBFS type Change-Id: I6e5f845cb4ce5b00f01a39619919f85e39028f19 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/25648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-04-17mb/google/poppy/variants/nami: Enable DPTF and configure DPTF parametersFrank Wu
The commit enables DPTF function. The DPTF parameters are provided by thermal team. BUG=b:72974136 BRANCH=poppy TEST=emerge-nami coreboot then check the parameters in DPTF ui tool Change-Id: I9b7ae34ee64f19ef783a8c1571831b2293105a18 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-16mb/google/octopus: Add Write Protect GPIO to cros_gpiosHannah Williams
This will enable crossystem to access WP GPIO BUG=b:78009842 TEST= wpsw_cur in crossystem reads the correct gpio Change-Id: Iedd0057d6bdfd5a666ff282bc784f7b98e8c96e8 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/25673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-16mb/google/poppy/variants/nami: Add SPD file for PantheonChris Zhou
Add SPD file for sdp hynix_dimm_H5AN8G6NCJR-VKC (ram id: 15). BUG=b:77893710 TEST=Verified that the device with this memory part boots to OS fine. Change-Id: I434d42ff12e6dae39e5676f36ba6cf00b3a48b06 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-16mb/google/poppy/variants/nami: Add SPD file for PantheonChris Zhou
Add SPD file for sdp micron_dimm_MT40A512M16LY-075E (ram id: 14). BUG=b:77930401 TEST=Verified that the device with this memory part boots to OS fine. Change-Id: Ia44e70948e57c2f19664d874ae005ac39d748f92 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-16google/kahlee: Resume on AC insertionMarshall Dawson
The EC should wake the system from S3 when the AC connector is plugged. BUG=b:77602394 TEST=verify resume on insert with Grunt Change-Id: I4bcaef2fe75283aaa6260b5b9efd408ff4b05f4c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/25647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-16mb/google/kahlee: Select BT I2S PAD on ACP_BT_UART muxAkshu Agrawal
bt-pad-enable property is used by kernel driver to set BT I2S PAD on ACP_BT_UART_PAD_SEL mux, for those platforms which use these pins for BT I2S. By default the pins are set for UART. BUG=b:72360151 TEST=Tested playback and capture on audio device connected to BT I2S Change-Id: Id76bfa1fa1dde904f02a03b0c15986ecb1bbcc97 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/25653 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-16Revert "mb/google/reef/sand: Override USB2 phy settings"Katherine Hsieh
This reverts commit aef0d6b0a7ec867ee29acf9e1c695be27626f239. This commit can only pass far-end USB eye diagram but will fail on near-end. Confirmed with Intel we should revert it. Change-Id: I2eb1d5ddb05ca6bbf6512edf48e3e0d8396ce6a7 Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/25651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-13src/mainboard/kahlee: Turn on keyboard backlight on gruntMartin Roth
Turn on keyboard backlight in romstage to indicate that the system is booting. BUG=b:77921345 TEST=Boot grunt, keyboard backlight comes on. Change-Id: Ib215b19ebdee2f8c4f431af775905eca42436d1c Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/25636 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-13siemens/mc_apl1: Fix accuracy issue with IDT PMICMario Scheithauer
Due to an accuracy issue on IMON in the IDT PMIC, the reported system power consumption was higher than the actual consumption. To prevent this problem, a logic must be implemented in mainboard_init(). This logic consists of slope and offset as constants for Vcc and Vnn, which need to be programmed by coreboot. This fix compensates for the accuracy issue. Change-Id: I77faf95951d03ac6ce97a6721dba6e8466122a25 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/25585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-04-13Revert "mb/google/reef: Override USB2 phy settings"Tim Chen
This reverts commit 70ba1b7e78930acca578114cdadcbcec367730e8. This commit can only pass far-end USB eye diagram but will fail on near-end. Confirmed with Intel we should revert it. Change-Id: I6de44d5240393409d9ec5835a9de0c23453300f7 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25630 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-13mb/google/kahlee: Fix IRQ routingRichard Spiegel
ACPI interrupt routing file routing.asl is not reflecting AGESA settings to the NB Interrupt Routing Registers. The AGESA settings are: Device self INTA INTB INTC INTD GPP 0 23 0 1 2 3 GPP 1 24 8 9 10 11 GPP 2 25 16 17 18 19 GPP 3 26 24 25 26 27 GPP 4 23 3 0 1 2 HDA none 22 23 20 21 GBIF none 6 7 4 5 Fix the routing table, considering that NB IOAPIC starts at interrupt 24. BUG=b:74104946 TEST=Build and boot to a modified grunt board to enable the emmc. Then used "cat /proc/interrupts" to get active interrupts. Also checked IOAPIC redirection registers, which are now being programmed. Change-Id: I60847c46f3f938f9e97d7b323b27d20e36aa2d02 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-13Revert "mb/google/coral: add usb2 phy setting override for some variants"Tim Chen
This reverts commit 06e3e1f055593bd2e2906f43040a703bc471cde4. This commit can only pass far-end USB eye diagram but will fail on near-end. Confirmed with Intel we should revert it. Change-Id: Ie987061e27996b0acc8345bf9aadb42d2c940808 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25629 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-13mb/scaleway/tagada: Document what the selected SMBIOS enclosure type meansJonathan Neuschäfer
This makes the Kconfig file more informative to read. Change-Id: Icdf4184c8db9cfed4863d9e9f3b714d67f44a4bd Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-04-12mb/google/octopus: Configure SMI for ESPIShaunak Saha
This patch enables EC SMI when ESPI is enabled. BUG=b:77857802 TEST= SMI is working in depthcharge. Change-Id: I52726194b8346488e5ad781e78e33c5d286d132f Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/25569 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11mb/google/octopus: enable MRC recovery cacheAaron Durbin
Enable the recovery cache to speed up recovery flows. Also enable clearing of the normal mrc cache on recovery forced retrains. BUG=b:77871444 TEST=went into recovery twice. 2nd time it boots faster. Change-Id: Idfce42ac835637fa521545fadfedecd65df91d4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-11mb/google/octopus: Select DRIVERS_SPI_ACPIFurquan Shaikh
This change selects DRIVERS_SPI_ACPI which is required to add SSDT node for SPI TPM. BUG=b:75306520 BRANCH=None TEST=None Change-Id: I0728062dae017522ba91a4b5cb16acf9f6bf4f28 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25611 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11src/amd/stoneyridge: Fix a typo (EDGEL_TRIG -> EDGE_TRIG)Jonathan Neuschäfer
Fixes: 2269a3c328 ("soc/amd/stoneyridge: Add functions for GPIO interrupts") Change-Id: I5730259bc6819defc482d31644e1f476679257b2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25588 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Chris Ching <chingcodes@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11mainboard/intel/cannonlake_rvp: include correct SND related DT entriesSathyanarayana Nujella
For cannonlake_rvp, want to support two sound configurations based on relevant daughter board connected (either of these configurations: SND_MAX98373_NHLT and SND_MAX98357_DA7219_NHLT). By default SSDT included all codec entries. This patch corrects and includes relevant codec entries in SSDT BUG=None BRANCH=master TEST=Verify 'emerge-cnlrvp coreboot' compiles successfully. Change-Id: I4f9487f3a81ef2d24315f75ec1d34bfab8560224 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/24918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11siemens/mc_apl1: Make DRAM configuration more flexibleMario Scheithauer
By storing the FSP-M DRAM configuration parameter in the hwinfo block, one becomes more flexible in case of a change of the DRAM type. The configuration data from hwinfo block is a one-to-one representation of the FSPM_UPD data starting with parameter 'Package' (offset 0x4d) and ending before parameter 'Ch0_Bit_swizzling' (offset 0x88). Change-Id: I58c1df0954a436710ecb59487ece07a0832b0de6 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/25586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-04-11mainboard/google/kahlee: Enable Keyboard backlight for GruntMartin Roth
Grunt supports a keyboard backlight, so enable the ASL code. BUG=b:77455525 Test=Boot Grunt, verify that the string 'KBLT' is in the DSDT. Change-Id: Idf0f23581bcba0b035c126c68fb167274d7c698a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/25470 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11mb/intel/dg43gt/devicetree.cb: Use tabs over spacesElyes HAOUAS
Change-Id: I5d18dfea0b0a33995de805219bda3a73892e5fde Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-10mb/google/octopus: Capitalize MB part nameJustin TerAvest
This is for consistency with other platforms. BUG=b:77494826 BRANCH=None TEST=Sucessfully rebooted, saw updated name in SMBIOS Change-Id: I83d9075931d51b3aef8076e4567a85a808ee5047 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25591 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10mainboard: Make OemCustomize.c available at romstageRichard Spiegel
As part of moving AGESA calls from bootblock to romstage, OemCustomize.c of all boards using stoneyridge must be available at romstage. BUG=b:74236170 TEST=Build grunt and kahlee, actual test will be performed at a later patch. Change-Id: Ide9efdbff6a07c670034391c0d62e8b74fa5c02b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25528 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10mb/google/poppy/atlas: Fix SPD index in commentJonathan Neuschäfer
Fixes: ba49c09b2f ("mb/google/poppy: Add variant for Atlas") Change-Id: I9c5c10abf8129ff61b97312a70ed4749606a3090 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25556 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10mb/google/poppy: Disable rear camera for all vayne skuAmanda Huang
Since there are two cameras on Nami and only one camera on Vayne. We need to disable rear camera on all Vayne sku. BUG=b:75073617 BRANCH=master TEST=Verify if only front camera shown on Vayne Change-Id: I6e7c1e8791462f00ad8336372954ee0a9465d9b8 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-09mb/google/octopus: Enable EC wakeShaunak Saha
This patch sets the wake for EC to proper gpios. BUG=77605178 TEST=Test that lidopen wakes up the system from S3. Change-Id: Icbf30007403191005396027e74b9b6fb7319e006 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/25539 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-09mb/google/octopus/variants/baseboard: Add DPTF parametersSumeet Pawnikar
This patch adds the DPTF parameters for Octopus baseboard. These parameters are copied from reef/coral as initial reference values. BUG=None BRANCH=None TEST=Build coreboot for Octopus board. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: I069bae8c9ef43ebd1ee20945ef34a7f51991f621 Reviewed-on: https://review.coreboot.org/25339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-09intel/nehalem post-car: Use postcar_frame for MTRR setupKyösti Mälkki
Adapt implementation from skylake to prepare for removal of HIGH_MEMORY_SAVE and moving on to RELOCATABLE_RAMSTAGE. With the change, CBMEM and SMM regions are set to WRBACK with MTRRs and romstage ram stack is moved to CBMEM. Change-Id: I84f6fa6f37a7348b2d4ad9f08a18bebe4b1e34e2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-04-06mb/lenovo/w520: Add ThinkPad W520 supportNico Rikken
Tested and working: * 4 RAM-slots * Speakers * PCIe Wifi * Camera * Fan * Touchpad, trackpoint and keyboard * Ethernet * Keyboard ACPI events * USB 3.0 * SD-card reader * Native graphics (LCD panel) * Harddisk in Ultrabay * SeaBIOS payloads ** Debian Live ** Debian testing 4.14.0-3-amd64 * GRUB ** Debian Live ** Debian testing 4.14.0-3-amd64 Not working: * Displayport and VGA output (requires VGA option ROM and ACPI switch call) Not tested: * Intel VGA option ROM * ACPI events related to ultrabay * Smart card reader * Docking station Change-Id: I1deb0436a807950c605dcd590deedcb3169bf8c5 Signed-off-by: Nico Rikken <nico@nicorikken.eu> Reviewed-on: https://review.coreboot.org/23564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-04-06mainboard: Add ASUS Maximus IV GENE-ZTristan Corrick
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.3 with kernel 4.9. This code is based on the output of autoport. Working: - S3 suspend/resume - USB - Gigabit Ethernet - integrated graphics - PCIe - SATA - eSATA - PS/2 port (only a mouse has been tested) - hardware monitor - onboard audio - front panel audio - native raminit (2 x 4GB + 2 x 8GB, DDR3-1333) - native graphics init with libgfxinit - EHCI debug. The debug port is the port closest to the HDMI port. - flashrom, using the internal programmer. Tested with coreboot, untested with the vendor firmware. - NVRAM settings. Only `gfx_uma_size` and `debug_level` have been tested with values different from the default. Untested: - VGA BIOS for graphics init - PCIe graphics - S/PDIF audio Not working: - "clear CMOS" button The CPUTIN sensor on the Super I/O is not connected. The PECI agent is likely connected instead to give CPU temperature readings. However, there does not appear to be enough information in the publicly available datasheets to fully set up the PECI agent. As a result, there is currently no accurate, automatic fan control via the Super I/O. Change-Id: I1fc7940bb139623a5a0fde984c023deca9b551f2 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/24971 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-06mb/intel/glkrvp: Unselect Chrome EC specific config when using Intel ECNaresh G Solanki
When building with Intel EC selected, unselect Chrome EC specific options i.e., LID switch to prevent build error. BUG=None BRANCH=None TEST=Build with Intel EC selected, Build should be successful. Change-Id: I39d6d65bbfd08d684af43972b89ca78fcbd58567 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/25479 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-06mb/google/octopus: Edge trigger cr50 interruptJustin TerAvest
Interrupts from cr50 are edge-triggered, not level-triggered. This change updates the GPIO configuration accordingly. BUG=b:75306520 BRANCH=None TEST=None Change-Id: I0c5fb4495b404412a78965c2de7f00248d0c684b Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25538 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-06mb/google/octopus/variants/baseboard: Enable DPTF supportSumeet Pawnikar
This patch enables DPTF support for Octopus baseboard. BUG=None BRANCH=None TEST=None Change-Id: I88a94c73ef0c9da708c0440f7edadd85488edfdb Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/25342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-06purism/librem_skl: Add AC/DC LoadLine to VR ConfigYouness Alaoui
The FSP 2.0 needs to set the ac_loadline and dc_loadline for each VR config. Without it, the Loadline is considered to be 0 mOhm and this causes CPU temp to jump all over the place whenever the CPU is used. This is necessary since there are no VR_CONFIG icc mappings for Skylake SKUs, only KabyLake. These values were copied from the Google Poppy devicetree. Change-Id: I6aeb6ee521988b94f2ae94a60d1a28b87ba984d4 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/25324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-06purism/librem_skl: Set TCC Activation at 95CYouness Alaoui
Set the Thermal Control Circuit (TCC) activaction value to 95C even though FSP integration guide says to set it to 100C for SKL-U (offset at 0), because when the TCC activates at 100C, the CPU will have already shut itself down from overheating protection. This was tested on Purism Librem 13 v2. A bisect showed that the immediate shutdowns happened after commit [1] was merged which led to this solution. [1] ec5a947b (soc/intel/skylake: make tcc_offset take effect) Change-Id: Idfc001c8e46ed3b07b24150c961c4b9bc9b71a62 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-06purism/librem_skl: Enable VMX and Intel SpeedStep in devicetreeYouness Alaoui
Although VmxEnable is currently ignored by FSP, a forthcoming patch explicitly enables it in coreboot, so set it in anticipation of that. Enable Intel SpeedStep to ensure the ACPI tables are generated for the C-states/P-states which are required for the xen-acpi-processor module to be loaded. Without it, the Qubes 4.0-rc4 installer will complain at boot about modules that could not be loaded. Change-Id: I968ef36ec9382a10db13d96fd3a5c0fc904db387 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-06purism/librem_skl: Enable TPM supportYouness Alaoui
Change the GPIO to match the TPM-enabled motherboards, and add TPM support in devicetree and enable the config. After changing the GPIO table, the librem 13v2 and librem 15v3 now have the same GPIOs, so use a single gpio.h file instead of one file per variant. Change-Id: I425654c1c972118aa81c27961246238c2eef782d Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/23683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-05mb/google/poppy/variants/nami: Add SPD file for Vaynechriszhou
Add SPD file for sdp hynix_dimm_H5AN8G6NAFR-UHC (ram id: 6). BUG=b:77290144 TEST=Verified that the device with this memory part boots to OS fine. Change-Id: I33503de21c9fc14537c00c092986fd4d2998dace Signed-off-by: chriszhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shelley Chen <shchen@google.com>
2018-04-05mb/amd/gardenia/gpio.c: Convert GPIO to new formatRichard Spiegel
New macros were developed that replace previous way of defining GPIO, with pin and intention very clear while keeping the table mostly identical to previous method (there's no pull up or pull down when a GPIO is set as an output). Change current gardenia table to use the new macros. BUG=b:72875858 TEST=Build Gardenia. Change-Id: I402b95374cc5ba01bb961ebcb34d8e465b443c08 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-05mainboard/google/kahlee: Update WP to active lowMartin Roth
The WP signal to the AP isn't inverted as it is on other platforms, so it was reporting incorrectly. Change the ACPI table to be active low, and invert the signal when reporting it to everything else. BUG=b:74946358 TEST=Boot grunt with battery inserted, WP signals both report 1. Remove battery, WP_CUR reports 0, WP_BOOT still reports 1. Change-Id: Ic1369dbda609e34b308af308880449643be6af39 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/25469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 10:37:44 +0000