summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2013-06-17AMD boards: Clean use of Kconfig optionsKyösti Mälkki
The chip component is unconditionally selected for the mainboard so these uses are superfluous. Change-Id: I84b053ab47f7b1f68e88d968cf305e24bc95f4da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3485 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17Add support for XHCI (USB 3.0)Dave Frodin
CONFIG_HUDSON_XHCI_ENABLE will control the XHCI flags in the amd/parmer and asus/f2a85-m mainboards. The XHCI ports on amd/thatcher are not wired to USB jacks so always disable the flags. This was tested on amd/parmer using a USB 3.0 thumbdrive. Change-Id: I596b040fec30882d8d4dee34ab9f866dc1f8896b Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3465 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17qemu: i440fx whitespace fixupGerd Hoffmann
Change-Id: I0d499027ffb175638cba0a9830d6ec2041a139db Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3488 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: add q35 supportGerd Hoffmann
Add support for the new q35 chipset emulation added in qemu 1.4. Change-Id: Iabfaa1310dc7b54c9d224635addebdfafe1fbfaf Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3430 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: add support for memory above 4GGerd Hoffmann
Change-Id: Ic83f55d01b29b43028e3b363749d64b927db5489 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3492 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: move ram ressource reservation from "set" to "read" stageGerd Hoffmann
So the pci allocation code knows where memory is and doesn't try map pci devices there. We also don't have to check for overlaps between pci hole and memory then. Change-Id: I5eaea0e4d21210719685860fa1f16ca7b2137cde Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3491 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-14qemu: move i440fx bitsGerd Hoffmann
Prepare tree for adding q35 support: Move emulation/qemu-x86 to emulation/qemu-i440fx. Rename some stuff to include 'i440fx'. Change-Id: Ib8c58175c5734cfcda1b22404ef52c09d38f0462 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3429 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-13AMD Thatcher: fix issue 'S3 fails to suspend after wake up from USB keyboard'Siyuan Wang
This issue can be reproduced in Linux by the following steps: 1) use pm-suspend to suspend. 2) use USB keyboard to wake up. 3) use pm-suspend to suspend. FAIL To SUSPEND. The cause of this issue is: USB devices use bit 11(0x0b) of GP0_STS represents S3 wake up event, but this bit is not clear after wake up. So OS thinks there is a wake up signal and wake up immediately. In this patch, I add AcpiGpe0Blk using MMIO access and write 1 on bit 11. Write 1 to clear as spec says. I have tested on Thatcher The same change was done for AMD Parmer in commit »AMD Parmer: fix issue 'S3 fails to suspend after wake up from USB keyboard' (03901124) [1]. [1] http://review.coreboot.org/#/c/3347/ (Change-Id: Iec3078bf29de99683e7cd3ef4e178fbeb4dc09c1) Change-Id: Iaef39237497ef896d0f186e8f5522222c0ce6cb7 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3374 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-12usbdebug: Quirk for board aopen/dxplplusuKyösti Mälkki
This ancient board with Intel e7505 invalidates cache while it does HW scrubbing for ECC in romstage. This breaks usbdebug console and prevents system from booting. If both EARLY_CONSOLE and USBDEBUG are selected, skip ECC scrubbing under these rare conditions to boot system. Change-Id: I6cb43bf69af54119f4a582dcaf498dd941d4c62d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3385 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10beaglebone: Expand "ROM" size to 4MB.Gabe Black
Now that the ROM size is decoupled from the size of the on chip RAM, it's size is now only constrained by the size of the medium it's loaded from and the memory it's being loaded into, probably GBs in both cases. Making it 4MB is a reasonable compromise between giving the payload lots of breathing room and wasting space on the source medium which won't be used. Change-Id: I80932e0d4ce2dad02c3879345382e7d6ba44503a Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3422 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10beaglebone: Force on every other user LED to show that coreboot is running.Gabe Black
Until we get serial working, this is a good way to show that coreboot is running. It can be removed once we have better methods. Change-Id: I62d25e52aa88a97aba4c959538d680b67a0bbbb2 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3329 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10Add support for VIA EPIA-M850 boardAlexandru Gagniuc
EPIA-M850 can now boot linux. For a list of issues, see: http://www.coreboot.org/VIA_EPIA-M850 That's all folks. Change-Id: I7624944dbc05fbf3019897a116954d71dfda0031 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/1228 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10OT200: bring LEDs into a defined stateChristian Gmeiner
Keep in mind that we can _NOT_ read back the current state of the LEDS as some crazy FPGA designer wanted it that way. Change-Id: I5cd1ac598072318b3234d1ec35a79271655b46ac Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3271 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-06-07Lenovo X60: Add int15 handlerDenis 'GNUtoo' Carikli
Without that commit, with CONFIG_PCI_OPTION_ROM_RUN_YABEL, The VGA option rom doesn't init the right display: it initializes the external display, where we have a black scren(with backlight on). This commit is based on the code of mainboard.c in src/mainboard/roda/rk886ex. Change-Id: I8457aaf0503e0efdf0fcba9ff5e8a07ac04c5ca6 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3265 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-06-06qemu: copy dsdt tables from SeaBIOS, adapt for coreboot and enable acpiGerd Hoffmann
First copy over from SeaBIOS git repo, then adapt for coreboot: Disable cpu/pci hotplug bits. Disable dynamic pci window. Both depend on stuff in the SSDT tables created by SeaBIOS. Bits are left in, but deactivated via #if 0, so it's easier to see the differences when diffing the coreboot tables with the SeaBIOS tables. Adapt dsdt DefinitionBlock. Enable acpi table generation in acpi_tables.c. With this patch linux boots successfully with ACPI enabled. It's not bug-free though. Missing cpu detection leads to funky messages like this one: weird, boot CPU (#0) not listed by the BIOS. and SMP most likely wouldn't work either. Change-Id: Ic3803a6f1ef6d54c11cc4ca3844d3032a374ae6b Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3342 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-06-06AMD Trinity: Remove unnecessary lookup table copyBruce Griffith
The DDI connector table and the PCIe Port List lookup table are copied onto HEAP. This copy is not needed since these are lookup tables used to define the platform configuration. Change-Id: If4760f80e08faa8da4fd11337a3812f89cf805f9 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06qemu: wind up new cpu chipGerd Hoffmann
Add boot cpu to the device tree. Figure the number of CPUs installed (using the qemu firmware config interface) and add cpu devices for them, so they show up in all generated BIOS tables correctly. This gets SMP going. Change-Id: I0e99f98942d8ca90150b27fc13c1c7e926a1a644 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3345 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-05qemu: add power management function to device treeGerd Hoffmann
Needed to make 'register "gpo" = ...' work. While being at it add comments saying which device is which. Change-Id: I911d5e4a7b6c7abf4ad73e863ab201e9e55ee0d4 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3346 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-05qemu: Initial support for the qemu firmware config interface.Gerd Hoffmann
qemu has a special device to pass configuration information from qemu to the firmware. This patch adds initial support the interface, namely some infrastructure, detection code and a function to query the number of CPUs. Change-Id: I43ff5f4fbf12334a91422aa38f514a82a1d5219e Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3343 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-05Revert "Asus F2A85-M: Activate IOMMU support"Paul Menzel
This reverts commit eed28f97b375a9469a2872996c19eb102647052e. For whatever reason, the dependencies were lost in Gerrit and the commit [1] was submitted without its dependencies. As a result buidling the ASUS F2A85-M fails now [2] and therefore commits based on this commit fail to pass the buid tests by Jenkins. […] Created CBFS image (capacity = 8387656 bytes) LINK cbfs/fallback/romstage_null.debug CC cbfs/fallback/coreboot_ram.debug coreboot-builds/asus_f2a85-m/generated/coreboot_ram.o:(.data+0x16b9c): undefined reference to `GnbIommuScratchMemoryRangeInterface' collect2: error: ld returned 1 exit status make: *** [coreboot-builds/asus_f2a85-m/cbfs/fallback/coreboot_ram.debug] Error 1 make: *** Waiting for unfinished jobs.... coreboot-builds/asus_f2a85-m/mainboard/asus/f2a85-m/buildOpts.romstage.o:(.data+0x3d8): undefined reference to `GnbIommuScratchMemoryRangeInterface' collect2: error: ld returned 1 exit status make: *** [coreboot-builds/asus_f2a85-m/cbfs/fallback/romstage_null.debug] Error 1 […] Therefore revert the commit to get the tree working again and submit this patch with its dependencies again. [1] http://review.coreboot.org/#/c/3317/ [2] http://qa.coreboot.org/job/coreboot-gerrit/6618/testReport/junit/(root)/board/i386_asus_f2a85_m/ Change-Id: I911755884da09eb0a0651b8db07ee2a32e6eaaaa Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3373 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-05qemu: fix IRQ routing setupGerd Hoffmann
Do the setup for all PCI slots, not only the third. Also remove the bogus message, as slot 3 may carry any device, not only NICs. This makes IRQ setup simliar to SeaBIOS. SeaBIOS assignments (with patch for logging added, and a bunch of pci devices for testing purposes): PCI IRQ [piix]: bdf=00:01.3 pin=1 line=10 PCI IRQ [piix]: bdf=00:03.0 pin=1 line=11 PCI IRQ [piix]: bdf=00:04.0 pin=1 line=11 PCI IRQ [piix]: bdf=00:05.0 pin=1 line=10 PCI IRQ [piix]: bdf=00:06.0 pin=1 line=10 PCI IRQ [piix]: bdf=00:1d.0 pin=1 line=10 PCI IRQ [piix]: bdf=00:1d.1 pin=2 line=10 PCI IRQ [piix]: bdf=00:1d.2 pin=3 line=11 PCI IRQ [piix]: bdf=00:1d.7 pin=4 line=11 Coreboot assignments without this patch: Assigning IRQ 11 to 0:3.0 Coreboot assignments with this patch: Assigning IRQ 10 to 0:1.3 Assigning IRQ 11 to 0:3.0 Assigning IRQ 11 to 0:4.0 Assigning IRQ 10 to 0:5.0 Assigning IRQ 10 to 0:6.0 Assigning IRQ 10 to 0:1d.0 Assigning IRQ 10 to 0:1d.1 Assigning IRQ 11 to 0:1d.2 Assigning IRQ 11 to 0:1d.7 Change-Id: Ie96be39185f2f1cbde3c9fc50e29faff59c28493 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3334 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-04Asus F2A85-M: Activate IOMMU supportRudolf Marek
Activate the IOMMU support for the Asus F2A85-M. Add the device to `devicetree.cb`. $ pci -s 0.2 […] 00:00.2 IOMMU: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit $ dmesg […] [ 0.000000] ACPI: IVRS 00000000bf144e10 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 00000000bf144e80 0051F (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.000000] ACPI: SSDT 00000000bf1453a0 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000bf145a52 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A) […] [ 0.465114] [Firmware Bug]: ACPI: no secondary bus range in _CRS […] [ 0.567330] pci 0000:00:00.0: >[1022:1410] type 00 class 0x060000 [ 0.567364] pci 0000:00:00.2: >[1022:1419] type 00 class 0x080600 [ 0.567427] pci 0000:00:01.0: >[1002:9993] type 00 class 0x03000 […] [ 0.597731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.597899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT] [ 0.597933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR0._PRT] [ 0.597972] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR1._PRT] [ 0.598073] pci0000:00: >Requesting ACPI _OSC control (0x1d) [ 0.603808] pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.612397] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.620508] Freeing initrd memory: 14876k freed […] [ 0.882674] pci 0000:00:01.0: >Boot video device [ 0.882876] PCI: CLS 64 bytes, default 64 [ 0.897088] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 extended features: PreF PPR GT IA [ 0.905816] pci 0000:00:00.2: >irq 40 for MSI/MSI-X [ 0.917457] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.922076] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.928500] software IO TLB [mem 0xbb13d000-0xbf13cfff] (64MB) mapped at [ffff8800bb13d000-ffff8800bf13cfff] [ 0.938535] LVT offset 0 assigned for vector 0x400 [ 0.943338] perf: AMD IBS detected (0x000000ff) [ 0.948037] audit: initializing netlink socket (disabled) [ 0.953432] type=2000 audit(1369659616.800:1): initialized [ 0.977011] HugeTLB registered 2 MB page size, pre-allocated 0 pages […] [ 7.881938] radeon 0000:00:01.0: >VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 7.881941] radeon 0000:00:01.0: >GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF […] [ 7.885516] radeon 0000:00:01.0: >irq 48 for MSI/MSI-X [ 7.885525] radeon 0000:00:01.0: >radeon: using MSI. […] [ 8.276775] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae000 flags=0x0010] [ 8.287363] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acc00 flags=0x0010] [ 8.297945] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae200 flags=0x0010] [ 8.308527] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae080 flags=0x0010] [ 8.319109] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae240 flags=0x0010] [ 8.329694] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001accc0 flags=0x0010] [ 8.340276] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ace80 flags=0x0010] [ 8.350858] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acd80 flags=0x0010] [ 8.361441] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae280 flags=0x0010] [ 8.372022] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae180 flags=0x0010] [ 8.382605] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ace00 flags=0x0010] [ 8.393188] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acdc0 flags=0x0010] [ 8.403770] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ace40 flags=0x0010] [ 8.414353] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae1c0 flags=0x0010] [ 8.424936] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acc40 flags=0x0010] [ 8.435518] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acc80 flags=0x0010] [ 8.446100] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae2c0 flags=0x0010] [ 8.456684] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae300 flags=0x0010] [ 8.467265] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae340 flags=0x0010] [ 8.477849] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae380 flags=0x0010] [ 8.488431] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae3c0 flags=0x0010] [ 8.499013] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae0c0 flags=0x0010] [ 8.509596] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acec0 flags=0x0010] [ 8.520179] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acd00 flags=0x0010] [ 8.530761] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad000 flags=0x0010] [ 8.541343] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae400 flags=0x0010] [ 8.551925] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae440 flags=0x0010] [ 8.562509] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acf00 flags=0x0010] [ 8.573090] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae480 flags=0x0010] [ 8.583675] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae100 flags=0x0010] [ 8.594257] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae4c0 flags=0x0010] […] [ 8.604840] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acf40 flags=0x0010] [ 8.615421] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acd40 flags=0x0010] [ 8.626004] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad140 flags=0x0010] [ 8.636587] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad040 flags=0x0010] [ 8.647169] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad080 flags=0x0010] [ 8.657751] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae500 flags=0x0010] [ 8.668335] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad100 flags=0x0010] [ 8.678917] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad0c0 flags=0x0010] [ 8.689499] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acf80 flags=0x0010] [ 8.700080] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acfc0 flags=0x0010] [ 8.710664] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae140 flags=0x0010] [ 8.721246] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae040 flags=0x0010] [ 8.731828] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad180 flags=0x0010] [ 8.742412] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae540 flags=0x0010] [ 8.752995] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad280 flags=0x0010] [ 8.763577] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad340 flags=0x0010] [ 8.774160] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad200 flags=0x0010] [ 8.784741] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad300 flags=0x0010] [ 8.795324] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae5c0 flags=0x0010] [ 8.805906] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae640 flags=0x0010] [ 8.816490] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad2c0 flags=0x0010] [ 8.827072] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad1c0 flags=0x0010] [ 8.837655] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad240 flags=0x0010] [ 8.848238] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae580 flags=0x0010] [ 8.858819] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae600 flags=0x0010] [ 8.869402] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad3c0 flags=0x0010] [ 8.879985] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad380 flags=0x0010] [ 8.890568] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae7c0 flags=0x0010] [ 8.901151] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae740 flags=0x0010] [ 8.911732] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae6c0 flags=0x0010] [ 8.922316] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae780 flags=0x0010] [ 8.932897] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae700 flags=0x0010] [ 8.943480] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae680 flags=0x0010] [ 8.963011] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 8.963165] radeon 0000:00:01.0: >WB enabled […] It is not known, what the implications of the `IO_PAGE_FAULT` are. Change-Id: Ic5fde609322a5fdeb1a48052c403847197752a4b Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3317 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04Lenovo X60: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback baud_rate = 115200 debug_level = Spew hyper_threading = Enable nmi = Enable boot_devices = '' boot_default = 0x40 cmos_defaults_loaded = Yes lpt = Enable volume = 0xff tft_brightness = 0xbf first_battery = Primary bluetooth = Enable The code for handling the invalid CMOS space in mainboard.c is now useless and so it was removed. Change-Id: Ic57a14eeeea861aa034cb0884795b0152757bf5b Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3335 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-04Asus M4A785T-M: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Enable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 400Mhz multi_core = Enable power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0xc slow_cpu = off nmi = Enable iommu = Enable nvramtool: Can not read coreboot parameter user_data because layout info specifies CMOS area that is too wide. nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Idea03b9bc75c5c34c7ce521ce5e5a1c1bb6dfa96 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3324 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-04PC Engines ALIX.1C: Add CMOS defaults.Denis 'GNUtoo' Carikli
After Booting the BIOS, flashing coreboot and booting coreboot with that patch we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Disable baud_rate = 115200 power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0x7f nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Ia87b09003d859f6dee7c09aa963df002c1d02688 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3323 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-04AMD Northbridge LX: get rid of #include "northbridge/amd/lx/raminit.c"Christian Gmeiner
Change-Id: I249c63646267ebe8dd8e06980aa6367a16fe7297 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3370 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: convert spd_read_byte() to non-static versionChristian Gmeiner
Change-Id: Ie329606852dfd7109acb694e9a9ff851b023cc63 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3369 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: move #include "northbridge/amd/lx/raminit.h"Christian Gmeiner
Move the include before static inline int spd_read_byte(). Change-Id: I4cac4b1f55368041b067422d95c09208e15d0f2d Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3368 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-03Asus F2A85-M: Fix the _CRS PCI0 bus infoRudolf Marek
On Asus F2A85-M, the Linux kernel complains that the _CRS method does not specify the number of PCI busses. [FIRMWARE BUG]: ACPI: no secondary bus range in _CRS Just put there 256. This should be part of re-factoring of the whole ACPI stuff. The same change was already done for the AMD Brazos (SB800) boards, based on commit »Persimmon DSDT: Add secondary bus range to PCI0« (4733c647) [1]. [1] http://review.coreboot.org/2592 Change-Id: I06f90ec353df9198a20b2165741ea0fe94071266 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3320 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: David Hubbard <david.c.hubbard+coreboot@gmail.com>
2013-05-31Lenovo ThinkPad X60: cleanup Native VGA init.Denis 'GNUtoo' Carikli
Change-Id: Iaefa23a6257fd0295357465eb03ccadbef0f70da Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3272 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-31AMD Trinity boards: Add reserved memory area for SPI base address in ACPISteven Sherk
- SPI controller base address gets overwritten by SD controller under Linux. - Reason for overwrite is the SPI base address isn't in a standard BAR and doesn't get automatically reserved. Solution is to add it as a reserved memory area in ACPI. - This issue was found on the ASUS F2A85-M platform. Currently a workaround on this platform was made as part of: http://review.coreboot.org/#/c/3167/3 - Once approved a follow-on patch for other southbridges using a non-standard BAR for the spi controller. Change-Id: I1b67da3045729a6754e245141cd83c5b3cc9009e Signed-off-by: Steven Sherk <steven.sherk@se-eng.com> Reviewed-on: http://review.coreboot.org/3270 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-31AMD Parmer: fix issue 'S3 fails to suspend after wake up from USB keyboard'Siyuan Wang
This issue can be reproduced in Linux by the following steps: 1) use pm-suspend to suspend. 2) use USB keyboard to wake up. 3) use pm-suspend to suspend. FAIL To SUSPEND. The cause of this issue is: USB devices use bit 11(0x0b) of GP0_STS represents S3 wake up event, but this bit is not clear after wake up. So OS thinks there is a wake up signal and wake up immediately. In this patch, I add AcpiGpe0Blk using MMIO access and write 1 on bit 11. I have tested on Parmer. Change-Id: Iec3078bf29de99683e7cd3ef4e178fbeb4dc09c1 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3347 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-30AMD Llano, Brazos boards: Use `sizeof(var)` to get its sizePaul Menzel
Change `sizeof(type) * n`, where n is the number of array elements, to `sizeof(variable)` to directly get the size of the variable (struct, array). Determining the size by counting array elements is error prone and unnecessary. Rudolf Marek’s patch »ASUS F2A85-M: Correct and clean up PCIe config« [1] contains the same change and is ported over. In the commit message Rudolf makes the following comment. »Not sure why the copy is needed instead of direct reference. Maybe it has something to do with CAR?« Testing on the ASRock E350M1, no regressions were noticed. [1] http://review.coreboot.org/#/c/3194/ Change-Id: I123031b3819a10c9c85577fdca96c70d9c992e87 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3248 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-30AMD Trinity boards: Use `sizeof(var)` to get its sizeRudolf Marek
Change `sizeof(type) * n`, where n is the number of array elements, to `sizeof(variable)` to directly get the size of the variable (struct, array). Determining the size by counting array elements is error prone and unnecessary. Not sure why the copy is needed instead of direct reference. Maybe it has something to do with CAR? These changes are based on Rudolf’s original patch »ASUS F2A85-M: Correct and clean up PCIe config« [1], where it was just done for the ASUS board. [1] http://review.coreboot.org/#/c/3194/ Change-Id: I4aa4c6cde5a27b7f335a71afc21d1603f2ae814b Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3247 Tested-by: build bot (Jenkins) Reviewed-by: David Hubbard <david.c.hubbard+coreboot@gmail.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-29qemu: remove vga hookGerd Hoffmann
Extra care for the qemu vga should not be needed any more. Since release 0.12 qemu loads the vgabios into the PCI ROM bar, so everything works exactly like it does on real hardware. Change-Id: I4b9bf1244cad437cbe5168600aeee52031456033 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3333 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-26beaglebone: initial Kconfig and MakefilesGabe Black
Initial structure of Beaglebone port Change-Id: Ia255ab207f424dcd525990cdc0d74953e012c087 Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3279 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-26Lenovo ThinkPad T60: Add support for `EARLY_CBMEM_INIT` needed for CBMEM consolePaul Menzel
Add code to support `EARLY_CBMEM_INIT` needed for CBMEM console support by copying GNUtoo’s commit for the Lenovo ThinkPad X60. commit 4560ca5003fe38a066616e8de1a8a414284750fd Author: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Date: Fri Apr 26 12:21:41 2013 +0200 Lenovo ThinkPad X60: Init CBMEM early for CBMEM console support. Reviewed-on: http://review.coreboot.org/3142 Change-Id: I0c4ca5a5e60f4bb3b91653a133ec71039fcca6ab Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3187 Tested-by: build bot (Jenkins) Reviewed-by: Denis Carikli <GNUtoo@no-log.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-05-26snow: Add a name to the serial console UART choice block.Gabe Black
This allows other boards to have the same choice block without confusing kconfig. Change-Id: Iea5a7f2d1c263aa7992f504b832ca9c862833c3f Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3293 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-20ASUS F2A85-M: romstage.c: Set RAM voltage for non 1.5 Volt casePaul Menzel
Currently the code in the if statement if (!byte) do_smbus_write_byte(0xb20, 0x15, 0x3, byte); only gets executed if `byte == 0x0`, that means only in the default case where RAM voltage is 1.5 Volts. But the RAM voltage should be changed when configured for the non-default case. So negate the predicate to alter the RAM voltage for the non-default cases. To prevent the build error OBJCOPY cbfs/fallback/coreboot_ram.elf coreboot-builds/asus_f2a85-m/generated/crt0.romstage.o: In function `cache_as_ram_main': /srv/jenkins/.jenkins/jobs/coreboot-gerrit/workspace/src/mainboard/asus/f2a85-m/romstage.c:106: undefined reference to `do_smbus_write_byte' collect2: error: ld returned 1 exit status make: *** [coreboot-builds/asus_f2a85-m/cbfs/fallback/romstage_null.debug] Error 1 add `southbridge/amd/agesa/hudson/smbus.c` providing the function `do_smbus_write_byte` to ROM stage in `Makefile.inc`. That can actually be used after the needed header files are included in a previous commit. Change-Id: I89542479c4cf6d412614bcf4586ea98e097328d6 Reported-by: David Hubbard <david.c.hubbard+coreboot@gmail.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3200 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-20Drop llshellStefan Reinauer
This feature has not been used and was never fully integrated. In the progress of cleaning up coreboot, let's drop it. Change-Id: Ib40acdba30aef00a4a162f2b1009bf8b7db58bbb Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3251 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-17AMD Inagua: PlatformGnbPcie.c: Allocate exact needed size for bufferBruce Griffith
The following commit commit 05f3b117dd44776ed17bc57318f260766039b7e8 Author: Paul Menzel <paulepanter@users.sourceforge.net> Date: Tue May 14 09:28:26 2013 +0200 AMD Inagua: PlatformGnbPcie.c: Allocate exact needed size for buffer Reviewed-on: http://review.coreboot.org/3246 changed one calculation for the size of the array PortList[] to reflect only four elements, but neglected three additional calculations of the size of the same table. Correct that by setting the size for four array elements in all four calculations. [1] http://review.coreboot.org/#/c/3239/3/src/mainboard/amd/inagua/PlatformGnbPcie.c Change-Id: Ib66b7b2b388d847888663e9eb6d1c8c9d50b9939 Reported-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3250 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-16AMD Inagua: PlatformGnbPcie.c: Allocate exact needed size for bufferPaul Menzel
The following commit commit d0790694b0a66353e5531715648ddaa1a6d577cb Author: Kerry Sheh <shekairui@gmail.com> Date: Thu Jan 19 13:18:37 2012 +0800 Inagua: Inagua GNB ddi lanes and pcie lanes config update Reviewed-on: http://review.coreboot.org/544 assigns lanes 4 and 5 to PCI device number 4, but does not adapt the rest of the code. After the commit above, the array `PortList []` only has four elements, but the buffer size `AllocHeapParams.RequestedBufferSize` is set to a size as it still has five elements. Correct that by setting the size for four array elements. [1] http://review.coreboot.org/#/c/3239/3/src/mainboard/amd/inagua/PlatformGnbPcie.c Change-Id: I3ff07f308ffd417d2bf73117eda9da2a1a05f199 Reported-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3246 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-14AMD Fam15tn boards: BiosCallOuts.c: Declare codec arrays as `static`Paul Menzel
These arrays are declared as `static` for AMD SB800 based boards, so do the same for this generation. Rudolf Marek just changed `const CODEC_TBL_LIST` to `static const` in [1]. Adapt all Fam15tn based boards (AMD Parmer, AMD Thatcher, ASUS F2A85-M) to keep the differences between them small. [1] http://review.coreboot.org/#/c/3170/3/src/mainboard/asus/f2a85-m/BiosCallOuts.c Change-Id: I353b38bd8bc77ba500a4b7fe9250e9aa3071c530 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3198 Tested-by: build bot (Jenkins)
2013-05-14AMD Fam15tn boards: Document lane ID mapping from BKDGRudolf Marek
To make it easier to fill in the values, place the table from the BIOS and Kernel Developer’s Guide (BKDG) [1] as a comment. [1] http://www.coreboot.org/Datasheets#AMD_Fam15 Change-Id: I218f76e9fa2dc88d47af51ea6c062e315afb0000 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3221 Tested-by: build bot (Jenkins)
2013-05-14AMD Brazos/Trinity boards: PlatformGnbPcie.c: Reserve correct amount of memoryPaul Menzel
In `PlatformGnbPcie.c` AGESA functions are used to reserve memory space to save the PCIe configuration to. This is the With the following definitions in `AGESA.h` $ more src/vendorcode/amd/agesa/f14/AGESA.h […] /// PCIe port descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in complex */ IN PCIe_ENGINE_DATA EngineData; ///< Engine data IN PCIe_PORT_DATA Port; ///< PCIe port specific configuration info } PCIe_PORT_DESCRIPTOR; /// DDI descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in complex */ IN PCIe_ENGINE_DATA EngineData; ///< Engine data IN PCIe_DDI_DATA Ddi; ///< DDI port specific configuration info } PCIe_DDI_DESCRIPTOR; /// PCIe Complex descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in topology */ IN UINT32 SocketId; ///< Socket Id IN PCIe_PORT_DESCRIPTOR *PciePortList; ///< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). IN PCIe_DDI_DESCRIPTOR *DdiLinkList; ///< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). IN VOID *Reserved; ///< Reserved for future use } PCIe_COMPLEX_DESCRIPTOR; […] memory has to be reserved for the `PCIe_COMPLEX_DESCRIPTOR` and, as two struct members are pointers to arrays with elements of type `PCIe_PORT_DESCRIPTOR` and `PCIe_DDI_DESCRIPTOR`, space for these times the number of array elements have to be reserved: a + b * 5 + c * 2. sizeof(PCIe_COMPLEX_DESCRIPTOR) + sizeof(PCIe_PORT_DESCRIPTOR) * 5 + sizeof(PCIe_DDI_DESCRIPTOR) * 2; But for whatever reason parentheses were put in there making this calculation incorrect and reserving too much memory. (a + b * 5 + c) * 2 So, remove the parentheses to reserve the exact amount of memory needed. The ASRock E350M1 still boots with these changes. No changes were observed as expected. Rudolf Marek made this change as part of his patch »ASUS F2A85-M: Correct and clean up PCIe config« [1]. Factor this hunk out as it affects all AMD Brazos and Trinity based boards. [1] http://review.coreboot.org/#/c/3194/ Change-Id: I32e8c8a3dfc5e87eb119eb17719d612e57e0817a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3239 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-12Revert "PC Engines ALIX.1C: Add CMOS defaults."Peter Stuge
Revert commit f90071faeee3358748d0c8d31e46721b53241e28 [1] as it was merged without its dependencies and therefore the source tree currently does not build [2][3]. OPTION option_table.h GEN build.h SCONFIG mainboard/pcengines/alix1c/devicetree.cb CC arch/x86/lib/cbfs_and_run.romstage.o CC arch/x86/lib/memcpy.romstage.o CC arch/x86/lib/memset.romstage.o CC arch/x86/lib/rom_media.romstage.o CC arch/x86/lib/romstage_console.romstage.o CC console/die.romstage.o CC console/post.romstage.o CC console/vtxprintf.romstage.o CC device/device_romstage.romstage.o CC lib/cbfs.romstage.o CC lib/compute_ip_checksum.romstage.o CC lib/gcc.romstage.o CC lib/lzma.romstage.o CC lib/memchr.romstage.o CC lib/memcmp.romstage.o CC lib/memmove.romstage.o CC lib/ramtest.romstage.o CC lib/uart8250.romstage.o CC southbridge/amd/cs5536/smbus.romstage.o ROMCC generated/bootblock.inc GEN generated/bootblock.ld make: *** No rule to make target `nvramtool', needed by `coreboot-builds/pcengines_alix1c/coreboot.pre1'. Stop. make: *** Waiting for unfinished jobs.... OPTION cmos_layout.bin [1] http://review.coreboot.org/#/c/3229/ [2] http://www.coreboot.org/pipermail/coreboot/2013-May/075864.html [3] http://qa.coreboot.org/job/coreboot-gerrit/6251/testReport/junit/(root)/board/i386_pcengines_alix1c/ Change-Id: I4764d90c39ccdb4dc7e7a9aef7525c306614e1a8 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3245 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-12Revert "Asus M4A785T-M: Add CMOS defaults."Peter Stuge
Revert commit b8b3e8bff32ee7dddcacec11e015f6683783eb2f [1] as it was merged without its dependencies and therefore the source tree currently does not build [2][3]. OPTION option_table.h SCONFIG mainboard/asus/m4a785t-m/devicetree.cb make: *** No rule to make target `nvramtool', needed by `coreboot-builds/asus_m4a785t-m/coreboot.pre1'. Stop. make: *** Waiting for unfinished jobs.... OPTION cmos_layout.bin [1] http://review.coreboot.org/3224 [2] http://www.coreboot.org/pipermail/coreboot/2013-May/075864.html [3] http://qa.coreboot.org/job/coreboot-gerrit/6251/testReport/junit/(root)/board/i386_asus_m4a785t_m/ Change-Id: I8bf33b62b56627f0eea9440ff5e5136e4122ef01 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3244 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-11Remove the wtm1 mainboardDuncan Laurie
This was an early bring-up reference board for ULT but it is no longer being worked on and was never complete enough to be useful and I no longer have a board so it is already stale and untested. All ULT bring-up work has moved to the wtm2 mainboard instead. Change-Id: If64d61bf7a3fc8c9e16096ffc28fa4128aa99477 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3231 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-11PC Engines ALIX.1C: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Disable baud_rate = 115200 power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0x7f nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Iba2701d4611cd2c2e5a2d76d41ffc23ed65574e8 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3229 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-11haswell: Fix VGA option rom INT15 handlerDuncan Laurie
The format of this function changed but was not updated in all mainboards. This fixes BaskingRidge and WTM2. The int15 handler no longer takes a regs structure as an argument and instead uses global variables. The yabel interface is now similar enough that we can drop the duplicate handler. Change-Id: Ia717ae14f99cee6d83ccdb1e26b9d7defe1638c4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48896 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3230 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-10Get rid of MAXIMUM_CONSOLE_LOGLEVEL; compile all messages into the coreboot ↵Ronald G. Minnich
binary This option has never had much if any use. It solved a problem over 10 years ago that resulted from an argument over the value or lack thereof of including all the debug strings in a coreboot image. The answer is in: it's a good idea to maintain the capability to print all messages, for many reasons. This option is also misleading people, as in a recent discussion, to believe that log messges are controlled at build time in a way they are not. For the record, from this day forward, we can print messages at all log levels and the default log level is set at boot time, as directed by DEFAULT_CONSOLE_LOGLEVEL. You can set the default to 0 at build time and if you are having trouble override it in CMOS and get more messages. Besides, a quick glance shows it's always set to max (9 in this case) in the very few cases (1) in which it is set. Change-Id: I60c4cdaf4dcd318b841a6d6c70546417c5626f21 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3188 Tested-by: build bot (Jenkins)
2013-05-10Asus M4A785T-M: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Enable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 400Mhz multi_core = Enable power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0xc slow_cpu = off nmi = Enable iommu = Enable nvramtool: Can not read coreboot parameter user_data because layout info specifies CMOS area that is too wide. nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Ifa09c7a468e3e0713b426763266ae633e67d8397 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3224 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-10AMD Thatcher: remove unused macros in PlatformGnbPcieComplex.hSiyuan Wang
The macros GNB_GPP_PORTx_PORT_PRESENT, GNB_GPP_PORTx_SPEED_MODE, GNB_GPP_PORTx_LINK_ASPM and GNB_GPP_PORTx_CHANNEL_TYPE are not used. Change-Id: I5c7b7d45880367dba452ebcd4f01fbd0c15aac22 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3087 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-09AMD: Reduce stack size from 64 KB to the default of 4 KBPaul Menzel
Apply the following commit to all AMD boards. commit 935850e08293cec1cb27d12358b27285e780566a Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon May 6 16:16:03 2013 -0700 asrock/e350m1: reduce default stack size The stack used on the ASRock E350M1 is significantly less than what we currently set (64k per core). In fact, we use about half of the default stack size (4k) on core 0 and even less on non BSP cores [1]: $ grep stack coreboot_without_patch_but_monotonic_timer.log CPU1: stack_base 002a0000, stack_end 002afff8 CPU1: stack: 002a0000 - 002b0000, lowest used address 002afda8, stack used: 600 bytes CPU0: stack: 002b0000 - 002c0000, lowest used address 002bf75c, stack used: 2212 bytes […] Reviewed-on: http://review.coreboot.org/3209 Please note that AGESA seems to define bigger stack sizes. But these seem to be too much too. $ git grep STACK_SIZE src/vendorcode/amd […] src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define BSP_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE0_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE1_STACK_SIZE 4096 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: BSP_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE0_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE1_STACK_SIZE, […] The following command was used to create the patch. $ git grep -l STACK_SIZE src/mainboard/ | xargs sed -i '/STACK_SIZE/,+3d' Change-Id: I36b95b7a6f190b64d0639fc036ce2fb0253f3fa1 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3217 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-08Drop CONFIG_AP_CODE_IN_CARStefan Reinauer
This option has not been enabled on any board and was considered obsolete last time it was touched. If we need the functionality, let's fix this in a generic way instead of a K8 specific way. This was mostly a speedup hack back in the day. Change-Id: Ib1ca248c56a7f6e9d0c986c35d131d5f444de0d8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3211 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-08copy_and_run: drop boot_complete parameterStefan Reinauer
Since this parameter is not used anymore, drop it from all calls to copy_and_run() Change-Id: Ifba25aff4b448c1511e26313fe35007335aa7f7a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3213 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08hardwaremain: drop boot_complete parameterStefan Reinauer
it has been unused since 9 years or so, hence drop it. Change-Id: I0706feb7b3f2ada8ecb92176a94f6a8df53eaaa1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3212 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-07asrock/e350m1: reduce default stack sizeStefan Reinauer
The stack used on the ASRock E350M1 is significantly less than what we currently set (64k per core). In fact, we use about half of the default stack size (4k) on core 0 and even less on non BSP cores [1]: $ grep stack coreboot_without_patch_but_monotonic_timer.log CPU1: stack_base 002a0000, stack_end 002afff8 CPU1: stack: 002a0000 - 002b0000, lowest used address 002afda8, stack used: 600 bytes CPU0: stack: 002b0000 - 002c0000, lowest used address 002bf75c, stack used: 2212 bytes Removing the Kconfig variable STACK_SIZE to use the default results in the following numbers of stack usage. $ grep stack coreboot_with_patch.log CPU1: stack_base 00287000, stack_end 00287ff8 CPU1: stack: 00287000 - 00288000, lowest used address 00287da8, stack used: 600 bytes CPU0: stack: 00288000 - 00289000, lowest used address 0028875c, stack used: 2212 bytes [1] http://review.coreboot.org/#/c/3154/ (comment May 2 10:21 AM) Change-Id: Ibdb2102c86094fce3787e3b5a162ca8423de205c Signed-off-by: Stefan Reinauer <reinauer@google.com> Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3209 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-06exynos5250/snow: deprecate time.hDavid Hendricks
This re-introduces 2fde966 (http://review.coreboot.org/#/c/3177/) which was reverted due to unsatisfied dependencies. time.h We Hardly Knew Ye. This deprecates time.h which is currently only used by Exynos5250 and Snow. The original idea was to try and unify some of the various timer interfaces and has been supplanted by the monotonic timer API. timer_us() is now obsolete. timer_start() is now mct_start() and is exposed in exynos5250/clk.h. Change-Id: I8e60105629d9da68ed622e89209b3ef6c8e2445b Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3201 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-04Lenovo ThinkPad X60: Clean up `romstage.c`Paul Menzel
1. Move comment for console init to correct place. 2. Start output with capital letter and add full stop at the end. 3. Add missing »)« at the end of description of GPIO 10. 4. Use tabulators instead of spaces. 5. Indent the code automatically using GNU indent [1] with the `-sc` switch adding stars in front of comment blocks as the good indent manual documents. $ indent -linux -sc src/mainboard/lenovo/x60/romstage.c Leave the numbers left aligned as it is more beneficial to be able to run indent without adapting the result afterward. [1] http://www.coreboot.org/Development_Guidelines#Coding_Style Change-Id: I2fa018ec28ff19d23d68754b565c13a7d7a57355 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3185 Tested-by: build bot (Jenkins) Reviewed-by: Denis Carikli <GNUtoo@no-log.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-04Revert "exynos5250/snow: deprecate time.h"David Hendricks
This reverts commit 2fde9668b47e74d1bfad2f1688a4481e6b966d04 Somehow this got merged before its dependencies. 3190 must be merged first, followed by 3176. However 3190 will fail while this patch is in. So the situation can't correct itself. Reverting this until the other two go in. Change-Id: I176f37c12711849c96f1889eacad38c00a8142c4 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3195 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-04Asus F2A85-M Enable the SD controller for F2A85-MRudolf Marek
If the SD controller is "off" hudson.c won't disable that because, there is no code for this yet. The PCI device is still visible and PCI BAR will be allocated by Linux. Unfortunately it may happen that the particular address is used by non-standard BAR for SPI controller. Change-Id: Ied7c581727541e2c81b0b1c2b70fd32de0014730 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3167 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-03exynos5250/snow: deprecate time.hDavid Hendricks
time.h We Hardly Knew Ye. This deprecates time.h which is currently only used by Exynos5250 and Snow. The original idea was to try and unify some of the various timer interfaces and has been supplanted by the monotonic timer API. timer_us() is now obsolete. timer_start() is now mct_start() and is exposed in exynos5250/clk.h. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I14ebf75649d101491252c9aafea12f73ccf446b5 Reviewed-on: http://review.coreboot.org/3177 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-03mainboard/{asus/f2a85-m,amd/thatcher}: move UDELAY_LAPICDavid Hubbard
Stefan Reinauer suggested 'select UDELAY_LAPIC' did not belong in f2a85-m/Kconfig. It got there via copy-paste from thatcher/Kconfig so this commit removes the 'select UDELAY_LAPIC' from both and puts it in cpu/amd/agesa/family15tn/Kconfig Since f2a85-m is the only Thatcher board coreboot supports right now, this should not break any other boards. Change-Id: I811b579c31f8d259a237d3a6724ad3b17f3a6c3e Signed-off-by: David Hubbard <david.c.hubbard+coreboot@gmail.com> Reviewed-on: http://review.coreboot.org/3178 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2013-05-01AMD Hudson A55E: Remove GEC firmware blob kconfig promptBruce Griffith
The "gigabit ethernet controller" (GEC) block was added to AMD Hudson A55E to integrate ethernet capabilities into an AMD southbridge. The GEC is designed to work with B50610 and B50610M gigabit PHY chips from Broadcom. These parts may not be generally available in small quantities for embedded development. The GEC block requires an opaque firmware blob to function. The GEC blob is controlled by AMD and Broadcom and is not available from coreboot.org. This change removes GEC support from AMD Parmer and AMD Thatcher mainboards since these boards do not have the Broadcom PHY. AMD has requested that the GEC be hidden for Hudson FCH since the PHY parts are not generally available. This Kconfig option can make it appear that this is a viable and supported way to add Ethernet to an embedded board. It is possible to use the Hudson GEC block with other PHYs, but this requires development of a custom GEC blob and a custom Ethernet driver. A custom GEC blob has been developed for a Micrel PHY, but there is no accompanying driver. Change-Id: I7a7bf4d41e453390ecf987c9c45ef2434fc1f1a3 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3127 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-01Google/Snow: Revise bootblock initialization.Hung-Te Lin
It's fine to always start timer even in suspend/resume mode, so we can move the timer_start() back to the very beginning of boot procedure. That provides more precise boot time information. With that timer change, the wake up state test procedure can be simplified. Verified by building and booting firmware image on Google/Snow successfully, and then suspend-resume without problem (suspend_stress_test). Change-Id: I0d739650dbff4eb3a75acbbf1e4356f2569b487d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3151 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01Google/Snow: Remove duplicated SPI1 initialization in bootblock.Hung-Te Lin
The firmware media source (SPI1) is already initialized by Exynos iROM. There is no need to do it again. Verified by building and booting Google/Snow successfully. Change-Id: I89390506aa825397c0d7e52ad7503f1cb808f7db Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3147 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-30Google/Snow: Remove unnecessary serial console init code.Hung-Te Lin
The "console_init" does initialize UART driver (which will setup peripheral and pinmux) and print starting message. Duplicated initialization can be removed. Also, console_init (from console.c) is always linked to bootblock (and will do nothing if CONFIG_EARLY_CONSOLE is not defined) so it's safe to remove #ifdef. Verified by building and booting on Google/Snow, with and without CONFIG_EARLY_CONSOLE. Change-Id: I0c6b4d4eb1a4e81af0f65bcb032978dfb945c63d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3150 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-30Lenovo ThinkPad X60: Init CBMEM early for CBMEM console support.Denis 'GNUtoo' Carikli
Enable `EARLY_CBMEM_INIT` for CBMEM console support by looking how other boards do this. This commit is tested by enabling the CBMEM console (`CONSOLE_CBMEM` in Kconfig) and then in GRUB 2 (as a payload) with the cbmemc command from the cbmemc module and in userspace with ./cbmem -c. Both worked. Change-Id: I34618a55ded7292a411bc232eb76267eec17d91e Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3142 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-04-30Google/Snow: Temporary fix for resume failure.Hung-Te Lin
The DDR3 memory initialization (with "mem_reset" set on normal boot) will cause resume to be unstable, especially when X is running. System may show X screen for few seconds, then crash randomly and unable to recover - although text console may still work for a while. Probably caused by corrupted memory pages. 'mem_reset' (which refers to RESET# in DDR3 spec) should be enabled according to DDR3 spec. But it seems that on Exynos 5, memory can be initialized without setting mem_reset for both normal boot and resume - at least no known failure cases are found yet. So this can be a temporary workaround. Verified by booting a Google/Snow device with X Window and ChromeOS, entering browser session with fancy web pages, closing LID to suspend for 5 seconds, then re-opening to resume. Suspend/resume worked as expected. Also tried the "suspend_stress_test" with X running and finished 100 iterations of suspend/resume test without failure. Change-Id: I7185b362ce8b545fe77b35a552245736c89d465e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3148 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-29Google/Snow: Enable suspend/resume.Hung-Te Lin
Add the suspend/resume feature into bootblock and romstage. Note, resuming with X and touchpad driver may be still unstable. Verified by building and booting successfully on Google/Snow, and then executing the "suspend_stress_test" in text mode ("stop ui; suspend_stress_test") in Chromium OS, passed at least 20 iterations. Change-Id: I65681c42eeef2736e55bb906595f42a5b1dfdf11 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3102 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-04-26google/snow: Revise romstage initialization code.Hung-Te Lin
Move board setup procedure to snow_setup_* functions, and Snow board-specific (wakeup) code to snow_* for better function names and comments. Verified by successfully building and booting on Google/Snow. Change-Id: I2942d75064135093eeb1c1da188a005fd255111d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3130 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-04-25google/snow: Add "wakeup" module for suspend/resume.Hung-Te Lin
The "wakeup" procedure will be shared by bootblock and romstage for different types of resume processes. Note, this commit does not include changes in romstage/bootblock to enable suspend/resume feature. Simply adding functions to handle suspend/resume. Verified by successfully building and booting Google/Snow firmware image. Change-Id: I17a256afb99f2f8b5e0eac3393cdf6959b239341 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3129 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-25arm/exynos: Allow DRAM controller to be initialized without clearing RAM ↵Hung-Te Lin
content. To support suspend/resume, PHY control must be reset only on normal boot path. So add a new param "mem_reset" to specify that. Verified to boot successfully on Google/Snow. Change-Id: Id49bc6c6239cf71a67ba091092dd3ebf18e83e33 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3128 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-23AMD Thatcher: ConnectorTypeDP supports both DP and HDMISiyuan Wang
It seems that ConnectorTypeDP in DdiList supports both DP and HDMI monitors. I tested by DP monitor and HDMI monitor connected by passive DP->HDMI adapter. Video and audio are OK. Hot plugging is also supported. This commit partially reverts commit >AMD Thatcher: Fix PCIE link issues< (7f23aeb0) [1]. [1] http://review.coreboot.org/3011 Change-Id: I23cf1c69a8274f47daf56f1a12aafd88bad4a128 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3088 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-23GOOGLE/SNOW: get graphics workingRonald G. Minnich
This adds support for display bring-up on Snow. It includes framebuffer initialization and LCD enable functions. Change-Id: I16e711c97e9d02c916824f621e2313297448732b Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3116 Tested-by: build bot (Jenkins)
2013-04-20AMD SB800 based boards: Use `#include <sb_cimx.h>` instead of `"sb_cimx.h"`Paul Menzel
Due to $ more src/southbridge/amd/cimx/sb800/Makefile.inc […] romstage-y += cfg.c romstage-y += early.c romstage-y += smbus.c ramstage-y += cfg.c ramstage-y += late.c […] `src/southbridge/amd/cimx/sb800/` is passed with the switch `-I` to the compiler, where it is also going to find the header file `sb_cimx.h`. Therefore use `#include <sb_cimx>` everywhere, which is what some AMD SB800 based boards already do. The only effect is, that the compiler will not needlessly look into directories which do not contain the header file [1]. The following command was used for the replacement. $ git grep -l sb_cimx.h src/mainboard/ | xargs sed -i 's/#include "sb_cimx.h"/#include <sb_cimx.h>/' [1] http://gcc.gnu.org/onlinedocs/cpp/Search-Path.html Change-Id: I96ab34bac1524e6c38c85dfe9d99cb6ef55e6d7c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3118 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-19google/snow: disable unused USB3.0 PLL to save powerDavid Hendricks
This PLL is unused and can be disabled to save about 250mW. Change-Id: I1be37304d6ea5ff78696e05ad1023ce3c57f636c Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3109 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-19google/snow: Minor clean-ups for display setup code in ramstageDavid Hendricks
This just cleans up a few areas: - Removed an unnecessary delay from exynos_dp_bridge_setup() - The delay at the end of exynos_dp_bridge_init() is necessary, so removed the comment suggesting that it might not be. - Simplified exynos_dp_hotplug Change-Id: I44150f5ef3958e333985440c1022b4f1544a93aa Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3113 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-19google/snow: enable clock gating to save powerDavid Hendricks
This enables clock gating to save power on unused IPs. Change-Id: I9ab2a2535ebb91bb4110390a6f055a67146bdbf9 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3110 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-19AMD Parmer: change DdiList to ConnectorTypeDP to support DP and HDMISiyuan Wang
This patch is based on >>AMD Thatcher: ConnectorTypeDP supports both DP and HDMI<< (I23cf1c6) [1] I tested by DP monitor and HDMI monitor connected by passive DP->HDMI adapter. Video and audio are OK. Hot plugging is also supported. [1] http://review.coreboot.org/#/c/3088/ Change-Id: I291beff43609ecb68ece24939f2dbc7c08dd0374 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3090 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-19[3/3] google/snow: enable TMUDavid Hendricks
This enables the thermal management unit (TMU) on Snow. Change-Id: Idd76af40bf0a5408baf61ef2665fd52ae4e260ba Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3108 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-04-18AMD Fam14: Split out the AMD Fam14 DSDTMike Loptien
Same splitting as done on Persimmon and ASRock. Moving common DSDT code to common areas and adding new files as necessary. Boards updated are: Inagua Union-Station South-Station Change-Id: I8c9eea62996b41cea23a9c16858c4249197f6216 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/3051 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-17google/snow: enable 32KHz sleep clockDavid Hendricks
Change-Id: I9db91826e4534b8a6eea2b13bcf7c6abd848b4e4 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3075 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-16AMD Parmer: remove unused macros and turn off unused pcie portSiyuan Wang
1) The macros GNB_GPP_PORTx_PORT_PRESENT, GNB_GPP_PORTx_SPEED_MODE, GNB_GPP_PORTx_LINK_ASPM and GNB_GPP_PORTx_CHANNEL_TYPE are not used. This is based on >AMD Thatcher: remove unused macros in PlatformGnbPcieComplex.h< [1]. 2) Disable unused PCIE port in devicetree.cb. PCIE port 3 is not used in Parmer. This is based on item 3 of >AMD Thatcher: Fix PCIE link issues< [2]. [1] http://review.coreboot.org/#/c/3087/ [2] http://review.coreboot.org/#/c/3011/ Change-Id: Id6f00d5e77ce5133d9ef3db07f95ad03a59e061a Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3099 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-16snow: Return 0 from get_recovery_mode_from_vbnv.Gabe Black
This function isn't yet used for much, or perhaps anything, but where it appears in the code it's ored with other values. Since we're not actually retrieving anything, it might be best to return 0 so that the other values that are being ored in can be expressed and this function can stay dormant until it actually has something to do. Change-Id: I6edc222a5c2d00ece2ecfad5191a615331eeaf16 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3098 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-04-16snow: Report the state of the power button GPIO in the coreboot tables.Gabe Black
Change-Id: Ia7ce2b7342e186c565b92211e3ac15d80ce24b38 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3097 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-16snow: Configure the power button as an input GPIO.Gabe Black
We need to read it to report its value to the payload. The kernel will reconfigure it as an external interrupt, but we'll make it a regular input for now. Change-Id: I019bd2c2731144d3b7bb53fad0c2c903874f616c Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3096 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-04-16snow: Fix the name of some constants in romstage.c.Gabe Black
These names were inherited from chromeos.c where they've already been fixed. Change-Id: I7ad57b979b7b8f42f6bd68d1ecf887caba3fa3f1 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3095 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-16snow: Get rid of the oprom loaded GPIO.Gabe Black
ARM doesn't use option ROMs, so this value doesn't make sense. Change-Id: I1a0f0854e1dd4b9594ca0c147e590337520436da Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3094 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-16snow: Tidy up chromeos.c.Gabe Black
Got rid of a lot of #defines, some of which were converted to enums and the rest which were eliminated entirely. Got rid of cruft in get_developer_mode_switch and started using it for the dev mode GPIO. Instead of a macro defining how many GPIOs are expected, now the code actually counts the GPIOs as they're added. Change-Id: I97b6b9f52a72d1276eb3cf36d7f9dd7b335b4d19 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3093 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-16snow: Add support for EC based recovery.Gabe Black
Implement the get_recovery_mode_switch function using the newly added I2C based Chrome EC support. Change-Id: I9d0200629887f202edf017cba3222a7d7f5b053e Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3092 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-16snow: Fix some comments in chromeos.c.Gabe Black
The comment about the lid switch was left over from when this file was copied from another board and was incorrect. Also fixed a capitalization inconsistency. Change-Id: Icefd19047971e13c08f615578e4a181e82a2997f Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3091 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-16Lenovo ThinkPad X60: Add Native VGA init.Denis 'GNUtoo' Carikli
The code has been taken from the google link mainboard and modified to fit the ThinkPad X60. Change-Id: Ie16e45163acdc651ea46699ecc33055bfd34099c Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/2998 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-16ec/google: Support Google's Chrome EC on I2C interface.Hung-Te Lin
Google's Chrome EC can be installed on LPC or I2C bus, using different command protocol. This commit adds I2C support for devices like Google/Snow. Note: I2C interface cannot be automatically probed so the bus and chip number must be explicitly set. Verified by booting Google/Snow, with following console output: Google Chrome EC: Hello got back 11223344 status (0) Google Chrome EC: version: ro: snow_v1.3.108-30f8374 rw: snow_v1.3.128-e35f60e running image: 1 Change-Id: I8023eb96cf477755d277fd7991bdb7d9392f10f7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3074 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-15Drop add_mainboard_resources and HAVE_MAINBOARD_RESOURCES againKyösti Mälkki
These are not defined since commit »Drop HAVE_MAINBOARD_RESOURCES« (1c5071d1) [1] but were unfortunately introduced again in new ports. [1] http://review.coreboot.org/1414 Change-Id: I5eb61628141aefd08779615702d51ca155fa632a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/2707 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-04-14link/graphics: Remove the inclusion of an AMD header.Denis 'GNUtoo' Carikli
link(google chromebook pixel) is an intel machine. Change-Id: I9d40f1e945021d8e190879477cd12be7d0262733 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3085 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-13exynos5/snow: remove wait_ms arg from dp_controller_init()David Hendricks
This removes the wait_ms argument from the dp_controller_init(). The only delay involved is a constant 60ms delay that happens if everything else goes well. This delay is derived from the LCD spec so there's no reason it should be baked into the controller code. (This patch also has the side-effect of fixing a bug where we were delaying on an undefined value for wait_ms). Change-Id: I03aa19f2ac2f720524fcb7c795e10cc57f0a226e Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3078 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-13Exynos5250: add a microsecond timerRonald G. Minnich
Add a microsecond timer, its declaration, the function to start it, and its usage. To start it, one calls timer_start(). From that point on, one can call timer_us() to find microseconds since the timer was started. We show its use in the bootblock. You want it started very early. Finally, the delay.h change having been (ironically) delayed, we create time.h and have it hold one declaration, for the timer_us() and timer_start() prototype. We feel that these two functions should become the hardware specific functions, allowing us to finally move udelay() into src/lib where it belongs. Change-Id: I19cbc2bb0089a3de88cfb94276266af38b9363c5 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3073 Tested-by: build bot (Jenkins)
2013-04-12Revert "siemens/sitemp_g1p1: Make ACPI report the right mmconf region"Nico Huber
This reverts commit 1fde22c54cacb15493bbde8835ec9e20f1d39bf5: commit 1fde22c54cacb15493bbde8835ec9e20f1d39bf5 Author: Patrick Georgi <patrick.georgi@secunet.com> Date: Tue Apr 9 15:41:23 2013 +0200 siemens/sitemp_g1p1: Make ACPI report the right mmconf region ACPI reported the entire space between top-of-memory and some (relatively) arbitrary limit as useful for MMIO. Unfortunately the HyperTransport configuration disagreed. Make them match up. Other boards are not affected since they don't report any region for that purpose at all (it seems). Change-Id: I432a679481fd1c271f14ecd6fe74f0b7a15a698e Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3047 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> It sneaked in without it's dependencies and, therefore, broke the build for all amdk8 targets. Paul Menzel already commented on the issue in [1]. It also doesn't look like the dependencies would be pulled soon [2]. [1] http://review.coreboot.org/#/c/3047/ [2] http://review.coreboot.org/#/c/2662/ Change-Id: Ica89563aae4af3f0f35cacfe37fb608782329523 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3063 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 18:35:00 +0000