| Age | Commit message (Collapse) | Author |
|---|
|
GPIO1_B3 (WLAN_MODULE_RST#) defaults as a pull-up input, but it is also
"pulled up" by 1.8V_WLAN. However, 1.8V_WLAN remains low for some time
during early boot. This leaves the signal floating somewhere in the
middle.
This has two potential issues:
(1) we're leaking some power for some (hopefully) short period of time
(2) we are possibly screwing with the Wifi power sequence; we aren't
supposed to deassert PDn (i.e., MODULE_RST#) until all the rails
have fully ramped for some period of time
Neither of the above issues are likely to be significant, but it is nice
to fix, I expect.
BRANCH=gru
BUG=chrome-os-partner:54026
TEST=measure WLAN_MODULE_RST# on scope at boot time
Change-Id: Ia6af9ad6954ad8feeda33015e3f205842380939e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0e890a2787bf034d3358a33fc88c2dd8078593ab
Original-Change-Id: I120e26ad0ca486a326874986e142dcaee965b62d
Original-Signed-off-by: Brian Norris <briannorris@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/388009
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16882
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
PHY_PER_CS_TRAINING is being enabled when DDR frequency >= 666.
For per cs training, the controller should consider the PHY
delay line switch time and there should be more cycles to
switch the delay line, so update the W2W_DIFFCS_DLY_ value
from 0x1 to 0x5.
BRANCH=none
BUG=chrome-os-partner:56940
TEST=do memtester on kevin board, and pass
Change-Id: I00df2d4724b0b77f3e7565809fb35bbd2ff01ea5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c135ea3e33d810ed322d947eb8d512d1ac119cfc
Original-Change-Id: I81b99cbc085769b7028e770509d79bd8d550820b
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/387506
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16721
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To save power when entering suspend, gpios 2 to 4 need to be set
to input and 'pull none' mode.
Pass the APIO configuration to ATF so it can do a proper job here.
BRANCH=None
BUG=chrome-os-partner:56423
TEST=run suspend_stress_test on kevin board
Change-Id: Id57fe8f622ae3f9c2bc7e58be89518b2b846cd37
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9c42082d1ca9a6baa735821382d3e83c1f8dc9ad
Original-Change-Id: Iaf441e8e34c5591ffe7c65f6533fcf0b733ff5ac
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/378475
Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com>
Original-Tested-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16720
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We need to disable some regulators when the device goes into suspend.
This means that we need to pass some gpios to bl31, and disable these
gpios when bl31 runs the suspend function.
BRANCH=None
BUG=chrome-os-partner:56423
TEST=enter suspend, measure suspend gpio go to low
[pg: also update arm-trusted-firmware to match]
Change-Id: Ia0835e16f7e65de6dd24a892241f0af542ec5b4b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0f3332ef2136fd93f7faad579386ba5af003cf70
Original-Change-Id: I03d0407e0ef035823519a997534dcfea078a7ccd
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/374046
Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com>
Original-Tested-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16719
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Create the initial Pyro variant which refers to the Reef.
Pyro is APL Chrome board that deviate from reference board Reef.
BRANCH=master
BUG=None
TEST=Build
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Change-Id: I9beed1f6895e8891d3d51b563edfe172f566718b
Reviewed-on: https://review.coreboot.org/16855
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
To improve sdram 800MHz and 933MHz stability, we
need to modify write leveling flow to get the
proper write leveling value.
BUG=chrome-os-partner:56940
BRANCH=none
TEST=Boot from kevin on 933MHz, and do stressapptest
Change-Id: I5b24c93d4a57917fb9af7e5e2a95d8423ccbaa7e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d84bf25b3e5de373c7913e6d534a810cb984b3fd
Original-Change-Id: I87efddf628c3683fcb85d6875e029cf3cbc482be
Original-Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/384292
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16716
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since there's currently a limitation in coreboot's code that prevents
more than 4KB to be used by the eventlog anyway, this patch shrinks the
available RW_ELOG area in the FMAP for Gru down to 4KB. This may prove
prudent later if we ever resolve that limitation, so that tools can rely
on the area in the FMAP being the same as the area actually used by the
read-only firmware code on these boards.
BRANCH=gru
BUG=chrome-os-partner:55593
TEST=Booted Kevin, confirmed that eventlog got written normally. Ran a
reboot loop to exhaust eventlog space, confirmed that the shrink code
kicks in as expected before reaching 4KB.
Change-Id: I3c55d836c72486665a19783fe98ce9e0df174b6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 05efb82ca00703fd92d925ebf717738e37295c18
Original-Change-Id: Ia2617681f9394e953f5beb4abf419fe8d97e6d3e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/384585
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Simon Glass <sjg@google.com>
Reviewed-on: https://review.coreboot.org/16715
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
sdram noc timing will affect ddr latency, this patch improves
rk3399 sdram noc timing so improve memory performance.
BRANCH=gru
BUG=chrome-os-partner:57248
TEST=Boot from kevin board
Change-Id: I09e984490a7ad747ef8abfc6542d0e2c95ec19bc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 43dfe55d713d371e39d21312772fd353614b7642
Original-Change-Id: I393e74ecdeb72930ac38ae9bcf311e5654f65162
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/382725
Original-Reviewed-by: Sonny Rao <sonnyrao@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Sonny Rao <sonnyrao@chromium.org>
Original-Commit-Queue: Sonny Rao <sonnyrao@chromium.org>
Reviewed-on: https://review.coreboot.org/16713
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We found some boards are not stable when sdram is run at 933Mhz.
Before we can fix it, we need to lower the sdram frequency to 800MHz.
In this patch we modify the DQS delay from 0x280 to 0x260 and extend
the DQS window.
BRANCH=None
BUG=chrome-os-partner:56940
TEST=Booted Kevin.
Change-Id: I68561c4aa4d9ab66acfa3515a42d696157aff759
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 877a7f6ad22a5bde9f9e458bcb65f133f2f001bd
Original-Change-Id: I5eab6bbe96f0dae095c5353403292022e7a25421
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/382724
Original-Commit-Ready: Douglas Anderson <dianders@chromium.org>
Original-Tested-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/16709
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add lpddr3-K4E6E304EB-2GB-1CH memory configuration for rialto.
BUG=chrome-os-partner:56759
BRANCH=none
TEST=Build
Change-Id: I698fe450d48b64a06232aa44ecf91d688d9dc17a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d3edecdb135939c3264ab1b831e7821d3a3e0149
Original-Change-Id: I7dae9fd822abeff5b08de0ab9262e1817ac58531
Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/380443
Original-Commit-Ready: Alexandru Stan <amstan@chromium.org>
Original-Tested-by: Alexandru Stan <amstan@chromium.org>
Original-Reviewed-by: Alexandru Stan <amstan@chromium.org>
Original-Reviewed-by: Jonathan Dixon <joth@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16699
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch moves the big CPU cluster initialization on the RK3399 from
the clock init bootblock function into ramstage. We're only really doing
this to put the cluster into a sane state for the OS, we're never
actually taking it out of reset ourselves... so there's no reason to do
this so early.
Also cleaned up the interface for rkclk_configure_cpu() a bit to make it
more readable.
BRANCH=None
BUG=chrome-os-partner:54906
TEST=Booted Kevin.
Change-Id: I568b891da0abb404760d120cef847737c1f9e3ec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bd7aa7ec3e6d211b17ed61419f80a818cee78919
Original-Change-Id: Ic3d01a51531683b53e17addf1942441663a8ea40
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/377541
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/16698
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Due to different LCD panel requirements the delay between LVDS becomes
active and the backlight is switched on needs to be increased to 500 ms.
Change-Id: I09029624469aef412141c7b46224d48557ba4af1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16875
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Several of the special function pins we're using in firmware have a
pre-assigned pull-up or pull-down on power-on reset. We don't want those
to interfere with any of the signaling we're trying to do on those pins,
so this patch disables them.
Also do some house-cleaning to group the bootblock code better, and
change the setup code for all SPI and I2C buses to first initialize the
controller and then mux the pins... I assume this might be a little
safer (in case the controller peripheral has some pins in a weird state
before it gets fully initialized, we don't want to mux it through too
early).
BRANCH=None
BUG=chrome-os-partner:52526
TEST=Booted Kevin.
Change-Id: I4d5bd3f7657b8113d90b65d9571583142ba10a27
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f8f7fd56e945987eb0b1124b699f676bc68d0560
Original-Change-Id: I6bcf2b9a5dc686f2b6f82bd80fc9a1a245661c47
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/382532
Reviewed-on: https://review.coreboot.org/16711
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Increase the SPI bus speed to speed up boot time. The maximum supported
speed at 1.8V is 37.5MHz, and 33MHz is the next lowest convenient speed,
given the clock parents.
BUG=chrome-os-partner:56556
BRANCH=none
TEST=boot on gru and see that things still work correctly. Total time
spent on reading from SPI reduces from 185ms to 141ms.
Change-Id: I71436c9e343b18360fa63d528dea5cfcfbc831e6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d7576f6e53e407af61160be142c3d589e864a8cf
Original-Change-Id: I55a19f523817862e081d23469e94fd795456dd67
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/381313
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Simon Glass <sjg@google.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16708
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
If we setup the PWM _after_ the pinmux then there's a period of time
when we're driving the PWM incorrectly. Let's setup the regulator and
_then_ configure the pinmux.
This fixes no known bugs, but it is more correct and probably makes the
signals look better at bootup.
BRANCH=None
BUG=None
TEST=scope
Change-Id: I311c0eded873b65e0489373e87b88bcdd8e4b806
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fcf4d0ba29d82cce779c0b25ead36de4a95d97a1
Original-Change-Id: I5124f48d04a18c07bbd2d54bc08ee001c9c7e8d1
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/381592
Original-Reviewed-by: Simon Glass <sjg@google.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16700
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ia5ea2198cdc93822723a4fe5440d574d76cb4de2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16847
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The datasheets on gm45: "Mobile Intel® 4 Series Express Chipset Family"
mention the possibility of having 352M ram preallocated for the
integrated graphic device. This only worked fine if the amount of ram in
the system was 3GB or less. When 4G or more is installed, memory is
remapped to create a 1GB large pci mmio hole which is not enough and
creates conflicts when 352M vram is used.
This patch increases the pci mmio hole size on Lenovo x200 to allow
352M vram to work.
TEST: build and flash on target with 4GB ram or more, use nvramtool to
set gfx_uma_size to 352M and reboot.
Change-Id: I5ab066252339ac7d85149d91b09a9eaaaab3b5b6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16831
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I18de4740e0d3512ec81e10b32d13d07a35791b57
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16846
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Iab0c7c470a3105b5df7b6b74aebdd1329e7f93ba
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16859
Tested-by: build bot (Jenkins)
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
On-board memory is on channel 1.
This fixes native raminit with 4GiB SO-DIMM installed.
Change-Id: If1b94e050d7e8d0dbd349c0415a182730aa5fa90
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/16845
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Kconfig symbols of type bool are ALWAYS defined, so this code was
always being included and run, which isn't what the author wanted.
Change to use IS_ENABLED(), and a regular if() instead of an #ifdef.
Change-Id: I72623fa27e47980c602135f4b73f371c7f50139b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16837
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Everybody knows WHAT they're supposed to do with options, so the text
"Pick this" or "Select to" are redundant.
Change-Id: I327c5be755373e99ca0738593bd78e1084d4d492
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16838
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I1559a2541a93a9969ac68708a04f0468790feb69
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16844
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ida10672380f6dffec0daf0073f25f6badfcd83eb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16843
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I2714553e2521f8178538755e3cfadec5c1fc6b12
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16842
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Kconfig hex values don't need to be in quotes, and should start with
'0x'. If the default value isn't set this way, Kconfig will add the
0x to the start, and the entry can be added unnecessarily to the
defconfig since it's "different" than what was set by the default.
A check for this has been added to the Kconfig lint tool.
Change-Id: I86f37340682771700011b6285e4b4af41b7e9968
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16834
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add Imac5,2 based on macbook2,1 port.
Change-Id: I34c8313c32920b02a2b964d8718e5b2b6b5a6820
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16638
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Idb37abea01831631aadba66ecd42bc7df03aa857
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16727
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
mainboard/biostar/am1ml.
Change-Id: Iba2fff5617c62152355b54e446517ad36108aa31
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16688
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch increases the CPU specific passive temp. trip point
and critical temp. trip point value for DPTF policy.
BUG=chrome-os-partner:57903
TEST=Built, booted on reef and verified this passive and
critical temp. trip points with heavy workload.
Change-Id: I2a38d01a6539c1bd478f8716c4b543ebcd1f2080
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/16766
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
|
|
For all mainboard variants use the "Google_Reef" family by default
which is populated in SMBIOS tables. A variant can provide their own
value if needed, but "Google_Reef" can reside as the family without
having to add conditions for each variant when MAINBOARD_FAMILY
have to be overridden.
BUG=chrome-os-partner:56677
Change-Id: Ic214eae1e6473b32f4cb442c09c34355357e1257
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16813
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If47f0c072399fe8291bd8e41920d828f649ec49f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16817
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Id46a0c4ca59dc7224c2eedd674ea3a5486509de1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16824
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ib439e5d96543790d17934bd477af62d39a5958b6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16815
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Id97981a05ce4af371c765c6950ed504557b0a584
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16825
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Iaf5ad440cfc2bbe08ea9f6c545e5e314645c8893
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16823
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I3040dc9a2534a77087805ee61c4f91d1bdb4d509
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16822
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I39ad6606869f059b2ef0c45d6741b844b3791655
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16821
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I36011719f79da4a9ab2aaeb92ffb0506b4373143
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16816
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I038e5cea654d1760ddb2c403c651d8f75e021251
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16819
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I1ffee53a04df6874f658feb3d6ce7d5c7b922837
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16818
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ibeb0da2f75b4aec32f5238e5634bc1f1d8220b84
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16820
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These default values weren't being set with the default
keyword so were ending up with different values.
from the default generated config file before this change:
CONFIG_DRIVER_TPM_I2C_BUS=0x9
CONFIG_DRIVER_TPM_I2C_ADDR=0x2
CONFIG_DRIVER_TPM_I2C_IRQ=-1
Change-Id: I19514d0c9b2a9b7e479f003a4d3384e073f4d531
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16828
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Because these variables had "non-hexidecimal" defaults, they
were updated by kconfig when writing defconfig files.
Change-Id: Ic1a070d340708f989157ad18ddc79de7bb92d873
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16827
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I2402648b8c0b9dcc730ce7f099e1e4ccef3b79fc
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16814
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add PCI device id to native graphic init and add the Native graphic init
option in Kconfig.
Change-Id: I136122daef70547830bcc87f568406be7162461f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16512
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Switch from FSP 1.1 to FSP 2.0 as the default build.
BRANCH=none
BUG=None
TEST=Build and run on Galileo Gen2
Change-Id: Icbb3a36cdde68baf4d68fbfc371f8847c56e1162
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16810
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Kconfig values to select the FSP setup:
* FSP version: 1.1 or 2.0
* Implementation: Subroutine or SEC/PEI core based
* Build type: DEBUG or RELEASE
* Enable all debugging for FSP
* Remove USE_FSP1_1 and USE_FSP2_0
Look for include files in vendorcode/intel/fsp/fsp???/quark
BRANCH=none
BUG=None
TEST=Build FSP 1.1 (subroutine) and run on Galileo Gen2
Change-Id: I3a6cb571021611820263a8cbfe83e69278f50a21
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16806
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: If6b36ebef49dd2733d272f990bb7c6623d4ab1b1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16785
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ic5359f794c64a9a67ec9e059af337a65073baff4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16784
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ib6191c590144438d7d9d6772d792a83e92d5516a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16783
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I303270a45171dda88b7661e3797fd3724e3b055f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16782
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ie752fe0a74acd4b79711596e56fc5ebf83884a0d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16779
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
pcm205401 is CPU board equipped with T40R of AMD. We used SeaBIOS and
Windows Embedded Standard 7 to test pcm205401.
In comparison to pcm205400, only VGA PCI ID is changed and board
identifier strings in SMBIOS / DMI.
Change-Id: I6c7e90db84f13ffbf9e629f2b92649895a466155
Signed-off-by: Yuichi Ito <yui.corebt@gmail.com>
Reviewed-on: https://review.coreboot.org/15930
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
pcm205400 is CPU board equipped with T56N of AMD. We used SeaBIOS and
Windows Embedded Standard 7 to test pcm205400. I disable the port5,
6, and 7 of the PCI-e in elmex/pcm205400/PlatformGnbPcieComplex.h.
I disable the audio capabilities at the 236th line of
elmex/pcm205400/platform_cfg.h. Coding style is modified to avoid the
error and warning that occur when I commit.
Change-Id: I77cb76903fe3c1b500a306426f5399936382695b
Signed-off-by: Yuichi Ito <yui.corebt@gmail.com>
Reviewed-on: https://review.coreboot.org/15929
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add board with amd/persimmon as template.
Change-Id: I263b54e0f49b6f1ba730c7f87de41f990ba8fe67
Signed-off-by: Yuichi Ito <yui.corebt@gmail.com>
Reviewed-on: https://review.coreboot.org/15926
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add the 'probed' flag to the touchpad and touchscreen devices so they
are probed by the kernel before being loaded, in case they do not exist
or are replaced with another vendor.
BUG=chrome-os-partner:57686
Change-Id: I0a61964e6874cd99fab0c21fa404a43548fc8ab5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16743
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I005e607faa2a6c527584ba9cdcad92f4517a15e6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16778
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I008ccc5fa9d96e52ee59a4562d81e4f7c1d1a6ac
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16775
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I9b7be74625dfcb6317a1cdb61d0dc77d7f359462
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16776
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Icd1f145b3575c6d95dacceb9c0426fbdedcdd686
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16777
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I6ca564294ff3d8eaeae21c0e2c008401aa3f32ff
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16774
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I74d4ef76b8166c8567b1b855c6bc963b4312df77
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16773
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I369c2063a5e57d1fd33d3c6bf7c715c22970fc32
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16772
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I4d2d876d48e018c247e7f365f7c237a4d8ced332
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16771
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I61bef70ec572c12518cd3763a6a860e56bfdb716
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16745
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I30b5830442da65ae3ddd35e8bca67795c34e9020
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16737
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I101462105da31654032ac7e6abd3f9423ad7a7ef
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16736
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ib2ab95b26c3bb1cbd58aafb1fafd1b285d6a5ba8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16738
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add a header file to provide common declarations that the
mainboards can use regarding EC init.
BUG=chrome-os-partner:56677
Change-Id: Iaa0b37eff4de644e969a18364713b90b7f27fa1c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16734
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Defer to the lid switch implementation provided by the chromeec.
BUG=chrome-os-partner:56677
Change-Id: Ida451dc29c8cf55fb88015e48a9e0bca3740f645
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16733
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Instead of having each mainboard provide the power button,
uncondtionally provide the power button ACPI device on behalf
of each mainboard.
BUG=chrome-os-partner:56677
Change-Id: I94c9e0353c8d829136f0d52a356286c6bedcddd5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16731
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Change-Id: Idef587d8261784e916e8d50f4336cbcfca39b9b0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16730
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I341293cd334d6d465636db7e81400230d61bc693
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16723
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Idc29373cb01f4304d22ae315812bd40f0aaa94c9
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16729
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: If16d55e4ba0702176dc61524915d215ea46c14ba
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16686
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The mainboard is not being worked on anymore, not available outside of
Intel and thus has litle practical use. Remove mainboard code completely.
Change-Id: Ic2c7ea3810ee70afc01a42786f8ccba9313134e4
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/16725
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Id8b60d32d5bdaaa6c693dcf5db992ed975cc2400
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16685
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ibd1fa89b450d52691dfef5616712f03fd675f123
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16684
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I4171e9bbf14c9aa65f698feabd78aa8fbf2a105f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16687
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Some changes were made in upstream in the meantime that broke the build:
- CHROMEOS_VBNV_CMOS was renamed to VBOOT_VBNV_CMOS
- recovery_move_enabled() -> vboot_recovery_mode_enabled()
- chromeos.asl was replaced by an acpi generator
Change-Id: Icd4ed5111cce9db79e12efb0cb7e898bba725c20
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16683
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Migrate google/enguarde (Lenovo N21 Chromebook) from Chromium tree to
upstream, using google/rambi as a reference.
original source:
branch firmware-enguarde-5216.201.B
commit cf1f57b [Enguarde: Adjust rx delay for norm.]
TEST=built and booted Linux on enguarde with full functionality
blobs required for working image:
VGA BIOS (vgabios.bin)
firmware descriptor (ifd.bin)
Intel ME firmware (me.bin)
MRC (mrc.elf)
external reference code (refcode.elf)
Change-Id: I3ccda29d1e095d8b1b36766cda913172f72233a7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/15444
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Enable the cr50 TPM and interrupt as GPE0_DW1_28 for use during
verstage. The interrupt is left in APIC mode as the GPE is
still latched when the GPIO is pulled low.
BUG=chrome-os-partner:53336
Change-Id: Ib0247653bdcbaccb645cd16b81d7ec3c38f669af
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16673
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These values are found in util/cbfstool/cbfs.h.
Change-Id: Iea4807b272c0309ac3283e5a3f5e135da6c5eb66
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16646
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Iab2a879ebdea9d93ef5eb7e3abf875036c1e1cb4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16641
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: If3cdfdff60c92e3427f1b285e2bca92e2bb2a1cb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16640
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In kernel side we set 1.1v for 1.5G, even for coreboot RO,
a higher voltage could be safer, 1.2v now seems too high.
BRANCH=none
BUG=chrome-os-partner:56948
TEST=bootup
Change-Id: I852e0d532369aad51b12770e2efb01aacf6662ce
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 000b5c099373be2a1f83c020ba23a0e79ea78fab
Original-Change-Id: Iecc620deee553c61a330353ac160aa3a36f516df
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/380896
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16583
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This enhances gradation of some icons on vboot screens.
BUG=chrome-os-partner:56056
BRANCH=none
TEST=Booted Jerry
Change-Id: Ia19d585b69e7701040209e8bf0b8a6990a166c95
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 4e7a42c999673ebd89c5b30845a4a5ec93852166
Original-Change-Id: I126cb7077c834e1a8b0a625a592dce8789b5876c
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/376884
Reviewed-on: https://review.coreboot.org/16581
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We did yet another small adjustment to the PWM regulator ranges for
Kevin rev6... this patch reflects that in code. Also rewrite code and
descriptions to indicate that these new ranges are not just for Kevin,
but also planned to be used on Gru rev2 and any future Gru derivatives
(which as I understand it is the plan, right?).
BRANCH=None
BUG=chrome-os-partner:54888
TEST=Booted my rev5, for whatever that's worth...
Change-Id: Id78501453814d0257ee86a05f6dbd6118b719309
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 4e8be3f09ac16c1c9782dee634e5704e0bd6c7f9
Original-Change-Id: I723dc09b9711c7c6d2b3402d012198438309a8ff
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/379921
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/16580
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This enhances gradation of some icons on vboot screens.
BUG=chrome-os-partner:56056
BRANCH=none
TEST=Booted kevin-tpm2
Change-Id: I2fc943f89386ccc6cd9293f5811182a5a51d99b0
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: bb1f0fb00d023c045305edc6c9fc655b764a4e8c
Original-Change-Id: Ieb61830b9555da232936087cdcf7c61a1e55bab4
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/376883
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16579
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds support to reboot the whole board after a hardware
watchdog reset, to avoid the usual TPM issues. Work 100% equivalent to
Veyron.
From my tests it looks like both SRAM and PMUSRAM get preserved across
warm reboots. I'm putting the WATCHDOG_TOMBSTONE into PMUSRAM since that
makes it easier to deal with in coreboot (PMUSRAM is currently not
mapped as cached, so we don't need to worry about flushing the results
back before reboot).
BRANCH=None
BUG=chrome-os-partner:56600
TEST='stop daisydog; cat > /dev/watchdog', press CTRL+D, wait 30
seconds. Confirm that system reboots correctly without entering recovery
and we get a HW watchdog event in the eventlog.
Change-Id: I317266df40bbb221910017d1a6bdec6a1660a511
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 3b8f3d064ad56d181191c1e1c98a73196cb8d098
Original-Change-Id: I17c5a801bef200d7592a315a955234bca11cf7a3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/375562
Original-Commit-Queue: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/16578
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ib00a9b2feb723d46642d86b2706728bbca7dd68d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16616
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
This reverts commit 24de342438208d9b843e87627f15b9a272285b0f.
|
|
Enable the cr50 TPM and interrupt as GPE0_DW1_28 for use during
verstage. The interrupt is left in APIC mode as the GPE is
still latched when the GPIO is pulled low.
BUG=chrome-os-partner:53336
Change-Id: I28ade5ee3bf08fa17d8cabf16287319480f03921
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch sets some magic number in magic undocumented registers that
are rumored to make USB 2.0 signal integrity better on Kevin. I don't
see any difference (unfortunately it doesn't solve the problems with
long cables on my board), but I guess it doesn't hurt either way.
BRANCH=None
BUG=chrome-os-partner:56108,chrome-os-partner:54788
TEST=Booted Kevin with USB connected through Servo. Seems to have
roughly the same failure rate as before.
Change-Id: If31fb49f1ed7218b50f24e251e54c9400db72720
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 0c5c8f0f80ea1ebb042bcb91506a6100833e7e84
Original-Change-Id: Ifbd47bf6adb63a2ca5371c0b05c5ec27a0fe3195
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/370900
Original-Reviewed-by: Guenter Roeck <groeck@chromium.org>
Original-Reviewed-by: David Schneider <dnschneid@chromium.org>
Reviewed-on: https://review.coreboot.org/16265
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This implements PRW method for WLAN and configures PCIe wake pin to
generate SCI.
BUG=chrome-os-partner:56483
TEST=Suspend the system into S3 or S0ix. System should resume through wake
event from wifi.
Change-Id: I9bd078c2de19ebcc652b5d981997d2a5b5f0b1b7
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/16611
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In spd_util.c function mainboard_get_spd_data(), spd_file can
either be NULL or will point to the first byte of the SPD data,
and should not be dereferenced.
Change-Id: I08677976792682cc744ec509dd183eadf5e570a5
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16612
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There are certain board-specific options for reef variants. The
big one is the DPTF settings. Rearrange the ASL files such
that dsdt.asl is the main landing area. The ACPI options for
Chrome EC are contained in the variant/ec.h header so the
actual code #includes can just reside in dstd.asl. Since most
of the mainboard specific peripherals are auto generated by
the acpigen from devicetree there's no real separate need
for mainboard.asl. The one thing not addressed in this CL
is the notion of a variant having the Chrome EC or not (along
with lid, etc). Future indirection can be provided when needed
to address that requirement.
BUG=chrome-os-partner:56677
Change-Id: I5c888f5fc64913dcff010c28f87e69ac5449e6b6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16604
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch disables the SataSetMaxGen2 flag.
This flag is a power saving option,
which forces the SATA to GEN2.
Payload SeaBIOS 1.9.1, Lubuntu 16.04, Kernel 4.4.
$ dmesg | grep ahci #before patch
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
$ dmesg | grep ahci #after patch
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Change-Id: I48361190969e6d38ddb5692f5e54b016b359fbb1
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15906
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The h8s needs around 3s to respond to ps2 commands
Change-Id: I0cf01969975b8dd3839eadf90cb2dac0f1eaafc4
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16505
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Martin Roth <martinroth@google.com>
|
