summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2008-10-12Add support for the VIA pc2500e mainboard (CN700 + VT8237R).Uwe Hermann
Works good enough to boot to a Linux console. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3650 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-11Drop a number of duplicated failover.c files (they have the same contentUwe Hermann
as the global src/arch/i386/lib/failover.c file). Also, drop a number of dummy failover.c files which are not even used at all. This is abuild-tested by me. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3649 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-10Enable vga bios by default on Tyan s2881. The board has an onboard ati rage XL.Ward Vandewege
This is a trivial patch. Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3646 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-06Whitespace fixes.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3638 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-04Fix obviously (syntactically) broken cmos.layout (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3637 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-02Fix a typo.Carl-Daniel Hailfinger
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3629 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-02Use easily readable macros to setup interrupt routing.Carl-Daniel Hailfinger
Change a few PCI bus/dev/fn to use hexadecimal numbers. Kill unused variables. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3628 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-01Missed a CONFIG_USE_PRINTK_IN_CAR define for the Asus m2v-mx_se.Marc Jones
This fixes that build error. (trivial) Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Marc Jones <marc.jones@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3627 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-01Enable all available devices on the ASUS A8N-E (trivial).Uwe Hermann
This is in preparation for actually making the devices work (which needs some extra code). Also, fix the incorrect mainboard subsystem IDs. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3625 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-01The ARRAY_SIZE macro is convenient, yet mostly unused. Switch lots ofCarl-Daniel Hailfinger
code to use it. That makes the code more readable and also less error-prone. Abuild tested. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3624 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-30Coding-style fixes and simplifications for the ASUS A8N-E (trivial).Uwe Hermann
The only non-cosmetic change is s/A8NE/A8N-E/ for the board name. This is build-tested by me. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3622 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-29AMD K8 platforms must use CAR so it makes sense to use the PRINK_IN_CARMarc Jones
option. This patch converts the following patches to use PRTINK_IN_CAR amd/serngeti_cheetah msi/ms9185 msi/ms9828 supermicro/h8dmr Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3617 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-26Add IRQ12 to the dbm690t mptable for mouse interrupt support.Marc Jones
Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3603 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-23This patch adds support for watchdog kill and adds it to Asus M2V-MX SE.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Marc Jones <marc.jones@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3595 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-23The AMD dbm690t mainboard uses the it8712f SIO with theMarc Jones
default 48MHz clock input. The Asus a8n_e uses the it8712f with a 24MHz clock input. The it8712f early init code was setting a 24MHz input clock(to support the a8n_e). Since 48Mhz is the default I added a function to set 24MHz input clock to the a8n_e. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3594 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-23Attached patch removes HPET info from ACPI tables. HPET does not work fine onRudolf Marek
VT8237R (random keyboard/mouse lockups). Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3593 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-23Following patch adds support for Asus M2V-E SE. Works pretty well, the onlyRudolf Marek
problem left is with CPU scaling setup. No VGA - may work with the Xorg drivers recently released, maybe with OpenChrome too. It wont work with the little patch which will hop in soon Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3591 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-22Patch for AMD DBM690T board.Michael Xie
Signed-off-by: Michael Xie <Michael.Xie@amd.com> Reviewed-by: Marc Jones <marc.jones@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3590 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-18Fix whitespace in tyan s289{1,2,5} files. Also removes some #if 0 and #if 1Myles Watson
that don't seem to clarify anything. Abuild tested. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3583 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-12For the jetway jf2/4 series of mainboards:Alex Mauer
* change the comment for device f.0 from "IDE" to "SATA" * turn on firewire device a.0 * turn on pata device f.1 * don't turn on the unusable device 10.5 (built-in vt8237 ethernet?) Signed-off-by: Alex Mauer <hawke@hawkesnest.net> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3577 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-10Add the "jetway j7f[24]*" mainboard. As compared to the Via Epia CN, thisAlex Mauer
changes the superio to a Fintek F71805F as described at http://www.coreboot.org/Jetway_J7F2_Build_Tutorial It also creates the mainboard tree for this series of motherboards (Jetway J7F2 and J7F4). I've tested it with one motherboard (J7F2WE1G3), and I believe it works with the others, as the differences among them are mostly trivial (processor speed, chipset and quantity of LAN cards, audio chipset, etc.). A list of the relevant motherboards with specs can be found at http://www.jetway.com.tw/jw/ipcboard_socket.asp?platid=16 The irq_tables.c is copied directly from the epia-cn, because the one generated by getpir with the factory BIOS did not work properly while the EPIA-CN one did. Minor changes on checkin to cope with moved romcc in latest revision. NOTE: This board is broken until the issue introduced in r3567 is resolved. Signed-off-by: Alex Mauer <hawke@hawkesnest.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3571 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-04This changes the python generated makefilesCarl-Daniel Hailfinger
targets/*/*/Makefile targets/*/*/normal/Makefile targets/*/*/fallback/Makefile to use a common copy of romcc, and to leave this compiler untouched by 'make clean' in targets/*/*/fallback/ and targets/*/*/normal/ . 'make clean' in targets/*/*/ will clean romcc. Thanks to Mats for the initial idea and implementation of a tool to do this. This patch has almost the same behaviour as the original tool without having to run the tool each time. Tested for abuild-friendliness. The patch saves ~10-12 seconds for every target using romcc. For a full abuild run, this is ~20% time saved. For the first 38 abuild targets, total build time is down to 13m24s instead of 16m22s on my machine. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Mats Erik Andersson <mats.andersson@gisladisker.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3564 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-01This patch gets the Epia-CN working without ACPI or APIC.Bari Ari
All devices work, no irq storms. Enjoy. Signed-off-by: Bari Ari <bari@onelabs.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3556 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-19Add Tyan S2912 platform with AMD Family 10 support. Arne Georg Gleditsch
Thanks Arne. Good job. Signed-off-by: Arne Georg Gleditsch <arne.gleditsch@numascale.com> Acked-by: Marc Jones <marc.jones@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3526 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-08Enable both IDE ports for our qemu target.Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3481 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-04Initial support for the ASI MB-5BLGP (Neoware Eon 4000s).Uwe Hermann
This works fine in Linux if you use the 'irqpoll' kernel command line option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3469 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-01oops, forgot these in the cleanup.. (trivial)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3461 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-07-23Update to the latest AMD Fam10 microcode patches.Marc Jones
Add platform option for patch file name. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3434 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-06-26Initial support for the A-Trend ATC-6240 board.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3391 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-06-22Enable hardware fan control for m57sli.Ronald Hoogenboom
Tested on v1 and v2 of the board. Signed-off-by: Ronald Hoogenboom <hoogenboom30@zonnet.nl> Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ronald Hoogenboom <hoogenboom30@zonnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-05-19Add support for the VIA EPIA-CN baord, which uses C7 + CN700 + VT8237R.Aaron Lwe
This also contains various improvements of the CN700 code in svn. Signed-off-by: Aaron Lwe <aaron.lwe@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3334 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-05-16Doesn't have to be executable (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3330 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-05-16Geode platforms that use a LPC Super I/O had the LPC serial IRQ set to allMarc Jones
the possible IRQs generated by the SIO. This included IRQ 7 as the default parallel port IRQ. This overlapped with the MFGPT driver setting IRQ7 for it's own use. This fix removes IRQ7 from the serial IRQ list for all the mainboards that were setting it to prevent the conflict and crash when the MFGPT driver loads. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3329 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-05-16New Target and initial support for the Thomson IP1000.Joseph Smith
Signed-off-by: Joseph Smith <joe@settoplinux.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3328 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-05-15This patch allows the RCA RM4100 to reboot. Upon rebooting in auto.c it ↵Joseph Smith
detects if the memory is already initialized, if so it issues a hard reset through the southbridge. Signed-off-by: Joseph Smith <joe@settoplinux.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3322 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-05-09coreboot-v2: Disable second serial port on NorwichJordan Crouse
There isn't really any good reason to have the second serial port enabled on Norwich, and this makes the X DDC code stop working. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3294 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-05-06This patch adds pc keyboard init function call for qemu in v2 since some ↵Aaron Lwe
payloads assume Coreboot initializes it. Coreboot v3 already does it. Signed-off-by: Aaron Lwe <aaron.lwe@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3280 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-05-06Fix various issues on MSI MS-7135 board.Jonathan A. Kollasch
- W83627THF is strapped to 0x4e, not 0x2e - there's no device 9 on PCI-E x1 bus, it should be device 0 - add mptable entries for AGR slot, based on info in user manual - enable floppy drive controller so that some legacy VGA ROMs will work Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3279 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-25Remove inline from FAM10 CPU initialization functions.Marc Jones
This doesn't save any space for me but it is the right thing to allow GCC to optimize. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-24This board (http://www.ieiworld.com/en/product_IPC.asp?model=PCISA-LX)Nikolay Petukhov
is based on amd-lx800/cs5536. Tutorial: http://www.coreboot.org/IEI_LX_800_Build_Tutorial Signed-off-by: Nikolay Petukhov <nikolay.petukhov@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3261 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-23This is the sata irq patch for s2895 and ultra40. It also changes some brokenMyles Watson
white space in the s2892 and s2891 mptable.c files. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3256 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-23Fix irqs for secondary ports on both sata controllers.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3255 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-23This patch fixes the 3 broken sata ports on the Tyan s2891 (primary port onWard Vandewege
secondary controller was ok). There were two problems: the master sata controller was not being initialized, and the irqs for the secondary ports on both controllers were not being set in the mptable. Thanks for Jonathan Kollasch for all the help figuring out the IRQ problem. While all ports work reliably under a recent kernel (2.6.24), sata is about half as fast as under the proprietary bios, according to bonnie++. That still needs fixing... Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3253 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-22Find matching settings for each CPUs FID, VID, and P-state registers and ↵Marc Jones
initialize them. Supports single and split plane systems. Set P0 on all cores for best performance. All APs will be in hlt(C1). The platform warm rest logic has been updated to alway reset for HT and FID/VID setup. It is not optional anymore. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3251 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-22Add early MSR and PCI register initialization. Marc Jones
This fixes many default setting as well as erratas. Some CPU core functions were moved from the HT init and platform specific code to the generic Fam10 CPU code. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3248 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-06This patch halts the tco timer early in the boot process on all ICH series ↵Joseph Smith
southbridges. It also keeps the boot processes from rebooting through out the coreboot process. Signed-off-by: Joseph Smith <joe@smittys.pointclark.net> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3218 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-30Like other Intel chipsets, the Intel 3100 has a TCO timer that rebootsEd Swierk
the system automatically unless software resets the timer periodically. The extra reboot extends boot time by several seconds. The attached patch adds a function to the Intel 3100 southbridge code that halts the TCO timer, thus preventing this extra reboot, and calls the function early in the boot process on the Mt. Arvon board. It also fixes a bug in the LPC device initialization -- the ACPI BAR enable flag is bit 7, not bit 4. Signed-off-by: Ed Swierk <eswierk@arastra.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3198 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-29Add support for the TeleVideo TC7020.Kenji Noguchi
Signed-off-by: Kenji Noguchi <tokyo246@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3197 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-29Now coreboot performs IRQ routing for some boards.Nikolay Petukhov
You can see this by executing commands like this: grep -r pci_assign_irqs coreboot/src/* This basically AMD/LX based boards: pcengines/alix1c, digitallogic/msm800sev, artecgroup/dbe61, amd/norwich, amd/db800. Also for AMD/GX1 based boards need a patch [http://www.pengutronix.de/software/ptxdist/temporary-src/references/geode-5530.patch] for the right IRQ setup. AMD/GX1 based boards is: advantech/pcm-5820, asi/mb_5blmp, axus/tc320, bcom/winnet100, eaglelion/5bcm, iei/nova4899r, iei/juki-511p. I have two ideas. 1. Delete duplicate code from AMD/LX based boards. 2. Add IRQ routing for AMD/GX1 boards in coreboot. The pirq.patch for IRQ routing logically consist from of two parts: First part of pirq.patch independent from type chipsets and assign IRQ for ever PCI device. It part based on AMD/LX write_pirq_routing_table() function. Second part of pirq.patch depends of type chipset and set PIRQx lines in interrupt router. This part supports only CS5530/5536 interrupt routers. IRQ routing functionality is included through PIRQ_ROUTE in Config.lb. Tested on iei/juki-511p(cs5530a), iei/pcisa-lx(cs5536) and also on TeleVideo TC7020, see http://www.coreboot.org/pipermail/coreboot/2007-December/027973.html. Signed-off-by: Nikolay Petukhov <nikolay.petukhov@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3196 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-28Fix for irq routing issues.Joseph Smith
Signed-off-by: Joseph Smith <joe@smittys.pointclark.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3193 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-19Following patch will setup KT890 HT automatically. It will find theRudolf Marek
max width of the link and also it will take the frequency of K8 HT already done coreboot (and checks if t can run on it). Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3169 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-18* split model_centaur into model_c3 and model_c7Stefan Reinauer
* simplify and improve cpuid table * add speedstep support for VIA C7 based CPUs * also included as many of Uwe's suggestions as possible Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3168 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-17Add support for the MSI MS-6119 mainboard.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3162 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-16This patch implements support for the Intel 3100 Development Kit ↵Ed Swierk
mainboard, aka "Mt. Arvon". Signed-off-by: Ed Swierk <eswierk@arastra.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3159 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-15Following patch extends the ROM decoding to last 1MB, allowing to use largerRudolf Marek
flashes such as SST49LF080A: 1024K x8 (8 Mbit) Tested on my system, the flash is found and if I use coreboot in second half it works too. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3148 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-09Initial support for the Intel 82830 northbridge and RCA RM4100 board.Joseph Smith
Signed-off-by: Joseph Smith <joe@smittys.pointclark.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3129 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-08Various cosmetic and coding style fixes for ASUS A8V-E SE (trivial).Uwe Hermann
No functional changes, only cosmetics. This is compile-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3128 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-25This patch adds automatic fan control for the CPU fan on the m57sliRonald Hoogenboom
board. This is done via the ec_init routine in a source file in the mainboard/gigabyte/m57sli directory. A Config variable 'HAVE_FANCTL' has been added to notify superio.c to get the ec_init externally. I (Ward) have tested this on the PLCC and the SOIC/SPI version of this board. It works. Signed-off-by: Ronald Hoogenboom <hoogenboom30@zonnet.nl> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3116 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-20Route device IRQ through PCI bridge instead in mptable.Yinghai Lu
Don't enable pin0 for ioapic of io-4. 1. apic error in kernel for MB with mcp55+io55 2. some pcie-cards could have pci bridge there, so need to put entries for device under them in mptable. Signed-off-by: Yinghai Lu <yinghailu@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3112 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-20Initial support for MSI MS-7135 (K8N Neo3) mainboard.Jonathan A. Kollasch
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-18Attached patch fixes two typos in the sio_setup routine (comment + wrong exitLDNRudolf Marek
device) and sets the chipset voltage from 1.6V to 1.5V. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3107 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-18Use virtual LDNs. It enables the GPIOs correctly (it preserves the GPIO5/2 ↵Rudolf Marek
from a sio_setup. As side effect I can now have GAME and MIDI portsenabled. It has been tested with my board. It produces same results. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3105 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-07Change references to qemu in Coreboot-v2 calls to qemu-x86.Myles Watson
The patch was followed by these svn commands: svn mv targets/emulation/qemu-i386/ targets/emulation/qemu-x86 svn mv --force targets/emulation/qemu-i386/ targets/emulation/qemu-x86 svn mv --force src/mainboard/emulation/qemu-i386/ src/mainboard/emulation/qemu-x86 svn mv --force src/cpu/emulation/qemu-i386/ src/cpu/emulation/qemu-x86 Signed-off-by: Myles Watson <myles@pel.cs.byu.edu> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-05Factor out print_conf() from Geode LX mainboard directories. TheCarl-Daniel Hailfinger
following mainboard files had identical Geode LX specific print_conf() implementations: mainboard/amd/db800/mainboard.c mainboard/amd/norwich/mainboard.c mainboard/digitallogic/msm800sev/mainboard.c mainboard/pcengines/alix1c/mainboard.c Move print_conf() to northbridge/amd/lx/northbridge.c where it belongs. Add a copyright notice to mainboard/digitallogic/msm800sev/mainboard.c. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Marc Jones <marc.jones@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-01 This patch fixes the decoding of the IO address range 0x0820->0x0827 into theFlorentin Demetrescu
LPC device of the MCP55 southbridge, thus enabling flashrom access to the SPI interface of the IT8716 SIO chip. Changes : 1) - increase MAX_RESOURCES to 24 in device.h -> this was needed because some functions of a PNP device can have more than 12 resources (ex the GPIO function of IT8716f), in which case one could have an "array overflow" inside the device structure (yes gcc is stupid!..) and ultimately a disaster (fool pointer at device init time..) 2) - define resource masks for the GPIO function in src/superio/ite/it8716f/superio.c -> this is needed because otherwise the IO ranges which are set into the LPC bridge of the SB are very strange (f.ex.: 0x800->0x7ff and so on..). Problem: the PNP_IO0 resource is not defined for the GPIO function, thus we have to define a "fake" mask "{0,0}" to avoid mismatching by the init code 3) - enable the flash SPI interface into src/mainboard/gigabyte/m57sli/Config.lb (by enabling the corresponding resource into the GPIO function). I know that this is problematic because not all m57sli boards are SPI, but .. do anyone have a better idea how to handle this?.. Signed-off-by: Florentin Demetrescu <echelon@free.fr> I (Ward) have verified your patch on a rev2 of this board (it works!) as well as on a rev1 (plcc). It does not affect flashing on rev1 nor have any averse side effects that I noticed, so I think this patch should go in. Acked-by: Ward Vandewege <ward@gnu.org> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3088 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-01This patch reverses an erroneous change that sneaked in during r2972, and brokeWard Vandewege
flashrom on the plcc-based rev 1 and 1.1 of the Gigabyte m57sli-s4 board. Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3087 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-28v2: Fix Serengeti-Cheetah flags tooJordan Crouse
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3086 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-28[V2]: Add CFLAGS to targets to suck in any passed in flagsJordan Crouse
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3085 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-27Add support for the Abit BE6-II V2.0 board.Uwe Hermann
Tested on actual hardware by Sergei Antonov <saproj@gmail.com>. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Sergei Antonov <saproj@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3083 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-26This patch fixes the remaining stack protector problem on v2. The ↵Ronald G. Minnich
DISTRO_CFLAGS were not being included on the CC line for cache_as_ram_auto.c Tested on ubuntu, where formerly it failed. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3079 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18Rename almost all occurences of LinuxBIOS to coreboot. Stefan Reinauer
Due to the automatic nature of this update, I am self-acking. It worked in abuild. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3053 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18Please bear with me - another rename checkin. This qualifies as trivial, noStefan Reinauer
code is changed. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3052 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-12Fix the documentation of GPIO setup, tell W83627EHF to use externalRudolf Marek
suspend clock (undocumented in datasheet, documented in 'W83627HG-AW'). Introduce sio_init function for all this. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3049 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-09Use macros to improve readability of the device-to-pin IRQ assignmentsCarl-Daniel Hailfinger
in GA-2761GXDK mptables.c. Thanks to Torsten Duwe for initial code. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: 蔡明耀 (Morgan Tsai) <my_tsai@sis.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3041 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-07Improve readability and remove redundancy by wrappingTorsten Duwe
similar smp_write_intsrc calls in preprocessor macros. Also add some comments about the actual devices the INTs belong to. Signed-off-by: Torsten Duwe <duwe@lst.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3035 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-30The following mainboards had a file named microcode_updates.c in theirCarl-Daniel Hailfinger
mainboard directories, but the code was not referenced anywhere. intel/jarrell dell/s1850 supermicro/x6dhr_ig2 supermicro/x6dhr_ig supermicro/x6dhe_g2 supermicro/x6dhe_g Besides that, the contents of these files were either duplicates of src/cpu/intel/model_f3x/microcode_M1DF340E.h or src/cpu/intel/model_f3x/microcode_M1DF3413.h. svn remove the following files: src/mainboard/supermicro/x6dhe_g/microcode_updates.c src/mainboard/supermicro/x6dhe_g2/microcode_updates.c src/mainboard/supermicro/x6dhr_ig/microcode_updates.c src/mainboard/supermicro/x6dhr_ig2/microcode_updates.c src/mainboard/dell/s1850/microcode_updates.c src/mainboard/intel/jarrell/microcode_updates.c Abuild tested, as expected no failures. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3028 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-21Add an interrupt entry for the onboard firewire controller,Torsten Duwe
Bus 1, device 10 (function 0 only), routed to IO-APIC pin 18 (verified on an v1.0 board). Signed-off-by: Torsten Duwe <duwe@lst.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3023 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-19Fix for newer iasl versions (trivial)Corey Osgood
Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3020 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-19trivial fix for abuild.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3019 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-19Initial AMD Serengeti_Cheetah_FAM10 platform for Barcelona support.Marc Jones
Signed-off-by: Marc Jones <marc.jones@amd.com> Reviewed-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3016 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-17Enable IDE legacy port access for all 440BX based boards per default, asUwe Hermann
this is needed (at the very least) to make FILO work on these boards. Disable UDMA/33 per default, which is slower but the safe choice, as we don't know which IDE devices a user has attached, and some don't support UDMA/33 very well or at all. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3010 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-09This adds the same line (uses CONFIG_PRECOMPRESSED_PAYLOAD) to everyMyles Watson
Options.lb file that already had a "uses CONFIG_COMPRESSED_PAYLOAD_LZMA" line in it. I figure that only adding it to the files that already have support for LZMA payloads makes sure I don't break anything. Signed-off-by: Myles Watson <myles@pel.cs.byu.edu> Acked-by: Ward Vandewege <ward@gnu.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3002 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-05Remove the coherent_ht_car.c file. It is exactly the same asUwe Hermann
coherent_ht.c (save one empty line removed) so there's no use to keep it around. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Marc Jones <marc.jones@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2998 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-04Enable vga option rom support for 1MB rom chip, which is what the h8dmr ↵Ward Vandewege
ships with (trivial). Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2996 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-29Flashrom does not work after booting LinuxBIOS on the Iwill DK8-HTX board,Mondrian Nuessle
according to mcqmcqmcq@fastmail.fm. Fix it. Signed-off-by: Mondrian Nuessle <nuessle@uni-mannheim.de> Acked-by: mcq <mcqmcqmcq@fastmail.fm> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2991 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-27Drop the unfinished, non-working Bitworks IMS board.Uwe Hermann
It never worked in v2 (the v1 port did work AFAIK, though), and it's not really useful as reference for other boards anymore (as we now have a dozen or so 440BX boards which work in v2). This is a specialized, custom board (not sold on the "public market"), so it's probably not useful for pretty much everyone out there anyway. We can easily re-add it later (based on one of the other 440BX boards) should there be interest and/or someone with the hardware to test. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2988 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-26Correction to irq tables. Ronald G. Minnich
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-25More abuild fixes, the previous ones weren't enough. Hopefully this covers ↵Corey Osgood
everything. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2985 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-25Small abuild fix for the iwill dk8_htx and latest iasl. Building this still ↵Corey Osgood
fails for me, but it's an lzma error and probably Debian's fault. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2984 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-25abuild fix for the asus a8v-e_se and newest iasl version (trivial)Corey Osgood
Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2983 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-25abuild fix for the amd serengeti_cheetah and the latest iasl version (trivial)Corey Osgood
Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-25Fix abuild for ASUS MEW-AM.Uwe Hermann
You cannot set 'default ROM_SIZE = 0' in Options.lb (and override it in targets/*/Config.lb). While it'll work for manual builds, abuild doesn't cope with that very well. So set a valid value in Options.lb, too. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2981 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-24Add support for the ASUS MEW-AM board.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2980 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-22Mark devices which are not available on the board with "N/A" toUwe Hermann
make it clearer why they are disabled (trivial). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2978 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-201. Fix pirq routing table setting for GA-2761GXDK.Morgan Tsai
2. Southbridge PCIe slots are working correctly now. 3. Disable keyboard & mouse ports for GA-2761GXDK. Signed-off-by: Morgan Tsai <my_tsai@sis.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2976 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-14Gigabyte M57SLI: Fix watchdog clocksource to be external, not internal.Carl-Daniel Hailfinger
Reason: The existing code does not tell us why it sets the watchdog clock at all, but since it appears in cache_as_ram_auto.c instead of the usual place (Config.lb) there has to be some meaning to it. Simply do what the proprietary bios does: Use the external clock source. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2973 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-14Autodetect presence of serial flash and set up the board accordingly.Carl-Daniel Hailfinger
This enables us to have only one configuration and one set of code for all revisions of the Gigabyte GA-M57SLI-S4. Flash is now setup correctly for both SPI and LPC flash. Detection of SPI flash in flashrom on rev. 2.x boards now hangs instead of failing. However, that is just an effect of the combination of incomplete initialization of the SPI controller and paranoid checks in the flashrom SPI code. If anyone wants to work on that, he needs a logic analyzer or creative imagination. Hint: LPC-to-SPI read passthrough, clock signal. Remaining issues for the M57SLI: Fan/environment control. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Harald Gutmann <harald.gutmann@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2972 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-14* Maintaining SiS south bridge device IDs.Morgan Tsai
* Strip unnecessary driver modules. Signed-off-by: Morgan Tsai <my_tsai@sis.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2971 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13Small fix to make abuild happy (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2969 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13Random minor cosmetical or coding style fixes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2966 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 16:56:41 +0000