summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2021-02-18mb/google/brya: Enable MLB USB Type-A PortTim Wawrzynczak
The USB Type-A port on the MLB was added to the schematic at the last minute and it was missed when adding brya0's overridetree. Also fix a few USB ACPI entries. BUG=b:180403898 TEST=`lsusb` shows plugged-in flash drive Change-Id: I8bf96a8b365cb4ea2fc07d7cf673b08e8872ff88 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-18mainboard/pine64/rockpro64: Add initial ROCKPro64 supportMoritz Fischer
This adds initial support for the Pine64 ROCKPro64 board. The ROCKPro64 (http://pine64.org/rockpro64) is a SBC using the RK3399 SoC with up to 4GB LPDDR4. So far only the bootblock part works, the romstage starts to execute, though. For ramstage to work we'll need to port some of the changes required for LPDDR4 vs LPDDR3. This will be addressed in follow up changes. UART2 on the PI-2 connector can be used as a coreboot console. GND is pin 6 TXD is pin 8 RXD is pin 10 Flashing: I used an OpenWRT nightly for the ROCKPro64 and its builtin tool. $ mtd write coreboot.rom /dev/mtd0 Recovering from a bad flash: To recover from a bad flash bridging pins 23 and 25 on the PI-2 connector will make the board boot from SD card. Signed-off-by: Moritz Fischer <moritzf@google.com> Change-Id: I47d0031fff8ee10b11ad74935eaeb05f1f7eb4b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50625 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-18mb/google/brya: Remove `Some generic macros` commentAngel Pons
This comment is useless, and was dropped from the tree in the past. Change-Id: Ie46bf13ec27ff9cd9423795fc170cc7526e18122 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49124 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-17mainboard/amd/bilby: Add Bilby CRB boardRitul Guru
Bilby is the reference board for AMD Raven, Raven2 and Picasso APUs. Bilby mainboard code is taken from mandolin variant Cereme. These new files are a renamed copy and subsequent patches will be applied to create a working bilby implementation. Change-Id: I426966d782e259a971ec36bac2498bc62b4ce7e2 Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-17mb/prodrive/hermes: Write board layoutPatrick Rudolph
The I2C EEPROM on SMBUS needs to be updated with the current board layout, so that the BMC knows the actual configuration. Collect all needed information and update the EEPROM if something changed. Every byte written add a delay of 5 msec. Change-Id: Ic8485e6c700eede75b1e829238ee70da65118ace Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-17mb: guard irq_tables for clang-formatPatrick Georgi
Some (notably older Intel) boards use a tabular description of irq routing that we want to keep pristine no matter what clang-format considers correct (as that's ugly). Change-Id: I259255a9f60208c659b658ecb81535e84a2aaa8c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2021-02-17mb/purism/librem_mini: Enable DRAM Refresh2XMatt DeVillier
Enable Refresh2X to mitigate RAM corruption during long (> 1hr) periods of S3/suspend, which leads to failure to successfully resume from S3. Unknown if an issue with all DRAM types, but tested w/Kingston KVR24S17D8 16GiB DDR4 SODIMMs. Test: Build/boot Librem Mini v1/v2, put device in suspend, wait > 1hr, ensure resume from S3 successful 100% of the time. Change-Id: Ie8e3ebbb1ebdcd98813b5f36f580a235712d2f97 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50756 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-17mb/intel/adlrvp: Fix incorrect SPD address issue on DDR4/DDR5Subrata Banik
Assign 7-bit address of the targeted slave SPD. TEST=Able to read correct SPD data from SMBUS. Change-Id: If24e61b583638be7c055541c6eb126da28b542f6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-02-17mb/intel/adlrvp: Early program SMBUS CLOCK and DATASubrata Banik
TEST=Ensure SMBUS CLK/DATA GPIO is in NF1. Change-Id: Id615462cc21fc24e7ec6ef16274d784d41bd9bd4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-02-16mb/google: Remove unused <string.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|strstr\|strtok_r\|strtok\|atol\|strrchr\|skip_atoi\|snprintf' -- src/)|grep '<' Change-Id: I3ba39077014c50c2dfb9fddf78813f1058c45cc1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-02-16mb/{intel,prodrive,protectli}: Remove unused <string.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|strstr\|strtok_r\|strtok\|atol\|strrchr\|skip_atoi\|snprintf' -- src/)|grep '<' Change-Id: Id2aa085a4762355d9fb1628df40f7b43fbc81fc0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-02-16mb/ocp/deltalake: Remove unused <string.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|strstr\|strtok_r\|strtok\|atol\|strrchr\|skip_atoi\|snprintf' -- src/)|grep '<' Change-Id: I0d2c362ba9b494bf4cce280192ec0b91dce3e8bb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2021-02-16mb/siemens/mc_apl1/variants/mc_apl2/mainboard.c: Clean includesElyes HAOUAS
Change-Id: I14ec7d6faa20542707a1b6041e1ce358ce4a537a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-02-16mb/prodrive/hermes: Improve board config EEPROM handlingAngel Pons
* Check and print errors returned from reading from I2C * Rework offset calculation by using more macros * Get rid of stage-specific preprocessor code * Define the EEPROM layout as struct * Make use of the defined EEPROM layout to calculate offsets * Read the UPD to disable VT-d from EEPROM Change-Id: Iad77811318c7dfd3a3a4f8d523cfa0f457f168b6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48808 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-16soc/inteL/broadwell: Move select CHROMEOS_RAMOOPS_DYNAMICKyösti Mälkki
With this selected, chromeos_reserve_ram_oops() is a no-op. Change-Id: I2f3b7b3c4a9549a14f2ba039c769546f9698409a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-15device: Add unit to Kconfig option name: `PRE_GRAPHICS_DELAY_MS`Paul Menzel
It’s good practice to put the unit into the name. Change-Id: I1493f61d4e495c22f09abf1829bb2eab9b1fd2b6 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-15src: use ARRAY_SIZE where possiblePatrick Georgi
Generated with a variant of https://coccinelle.gitlabpages.inria.fr/website/rules/array.cocci Change-Id: I083704fd48faeb6c67bba3367fbcfe554a9f7c66 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50594 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15src/mb: Remove unused <console/console.h>Elyes HAOUAS
Change-Id: I6e0f33172fbcecebddfccdf64c22685636a23936 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50524 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/lippert/frontrunner-af: Drop OSFL method in ASLKyösti Mälkki
Method only set variable OSRV, which nobody evaluates. Change-Id: I76d86af8ef6b75531f11612935dd097ee1e1a388 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-02-15broadwell boards: Switch to Lynxpoint GPIO headersAngel Pons
Move `CROS_GPIO_DEVICE_NAME` to a new `chromeos.h` header, because Lynxpoint uses a different value. Also drop unnecessary includes. Tested with BUILD_TIMELESS=1, Google Tidus remains identical. Change-Id: I38baed2c114fb93cfb82535a6ec00fb67e596d64 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50080 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/samus: Replace define with literalAngel Pons
The `GPIO_OUT_HIGH` macro is not present on Lynxpoint headers. Change-Id: I12dd065bee49097c602febf18c6c9940ecec5106 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50078 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/jecht/var/tidus: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Tidus remains identical. Change-Id: I1521a51455e2aa148298853bb1878e82b9f0c368 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50077 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/jecht/var/rikku: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Rikku remains identical. Change-Id: I4d5bec4ec18b645a14d21fbee7334761901a30df Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50076 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/jecht/var/jecht: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Jecht remains identical. Change-Id: I193fe1471b8ade5d03e874f92425962c1ed960c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50075 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/jecht/var/guado: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Guado remains identical. Change-Id: I3a806d07b0ca147492b90feaf90235ed919b1bb2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50074 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/samus: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Samus remains identical. Change-Id: I465457ea8e9a9716121eacc0f6d64de463f41d89 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50073 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/lulu: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Lulu remains identical. Change-Id: I0f0a584b3354971ee8d478fd17825e498ff3e423 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50072 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/gandof: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Gandof remains identical. Change-Id: I168fcad7088706ca5b21f5fbf6790b13054499e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50071 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/buddy: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Buddy remains identical. Change-Id: I6e6256a9cc88c9d0743150bfdf12b1b482fe157d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50070 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/auron_yuna: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Auron Yuna remains identical. Change-Id: I17e6bf20114f43da2897ec320ca26d8c6f6a4b09 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50069 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/auron_paine: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Auron Paine remains identical. Change-Id: I00b9184fe6f002c3e089c9fbc815862d60e7694f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50068 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/intel/wtm2: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Intel WTM2 remains identical. Change-Id: I422421cc3c336a7a1aceaff7b37ab7c82f64a03f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50067 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/purism/librem_bdw: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I573cd439e8284d84036e71615944f7a195155593 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50066 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/brya: Add EC I/O decode windowsTim Wawrzynczak
BUG=b:180013349 TEST=console shows successful EC <-> SoC communications Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ie09dcfa8b0de2706ffc236a978dc159594e327c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-02-15mb/google/brya: Enable cr50 supportTim Wawrzynczak
Add Kconfig options and devicetree entries for cr50 TPM. BUG=b:180017621 TEST=verify (via console) successful cr50 communications in verstage and payload (depthcharge). Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I80e27d0377960fb81f9149efb6f062d06432d40d Reviewed-on: https://review.coreboot.org/c/coreboot/+/50567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-02-15mb/google/guybrush: Configure non-native function GPIOsMathew King
Second pass GPIO configuration to enable the non-native function GPIOs based on the guybrush Proto 0 reference schematic 0210. BUG=b:177909472 TEST=builds Change-Id: I0fdc4d7369353f88cf05e2e1ec08898d4605e602 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-02-15soc/intel/broadwell/pch: Rename GPIO identifiersAngel Pons
Rename structs, types and functions to match Lynx Point's names. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I11ea27b00b5820eb5553712e0420836470ec0d27 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50064 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14sb/amd/cimx/sb800: Move common OSFL method in ASLKyösti Mälkki
We deal with mb/lippert/frontrunner-af later since it currently does not include <cimx/sb800/acpi/fch.asl>. Change-Id: I30b611fc1fb01777223d7222adc96308a247a35c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50591 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14AGESA,binaryPI boards: Drop OSV in ASLKyösti Mälkki
Not referenced anywhere in ASL. Change-Id: I52ac4722e48e1cc377386316dc034fb45a98181a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50471 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14ACPI: Move common _PIC methodKyösti Mälkki
Change-Id: I659835354570fb1d4860fcbddf2a51831170a374 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-14soc/amd/cezanne: move CPU cluster to chipset device treeFelix Held
This will be common for all boards, so move it to the chipset device tree. TEST=CPU cluster and LAPIC still show up in console logs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia49e7b4cfc09c60b6152b8ccc47f37b6adc1e319 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50613 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14mb/amd/majolica/mainboard: Set ACPI IRQRaul E Rangel
We now pass the ACPI SCI IRQ to the OS, so make sure the board routes it correctly. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1b4d5e0bfb1d9df9ac8a8c41cdf466a67f2673d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-02-13mb/google/guybrush: Add plain dsdtRaul E Rangel
Needed to enable ACPI support for cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia5869905ed053cdca5f61697cffc7f9b59370859 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-13mb/amd/majolica: Add plain dsdtRaul E Rangel
Needed to enable ACPI support for cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifd71635d3493e0cf104b60ecf94ebdf70d512b94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-13mb/lippert/frontrunner-af: Use common sb800/acpi/pcie.aslKyösti Mälkki
Change-Id: I6e6cdc49da540bd9901128bd1ef9f7060bc91f4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-12trogdor: Add fingerprint power sequencingJulius Werner
Some Trogdor variants will include a fingerprint sensor, so this patch adds support for its power sequencing. There is a requirement that the fingerprint power needs to be *off* for at least 200ms, and when it is turned back on it needs to stabilize for at least 3.5ms before taking the FPMCU out of reset. We meet these timing requirements by splitting the sequence across bootblock, romstage and ramstage. On current Trogdor boards we measured <end of bootblock> to <end of romstage> at ~430ms and <end of romstage> to <start of ramstage> at 12ms, so we easily meet the required numbers this way. BRANCH=trogdor BUG=b:170284663 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Iccd77e6e1c378110fca2b2b7ff1f534fce54f8ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/50504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-02-12mb/amd/majolica/devicetree: add CPU clusterFelix Held
Change-Id: I8d8b7f3ea2502e4e49a1290b07d84d5bbb2924a7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50506 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12soc/amd: Move fadt device tree settings into common_configRaul E Rangel
This is ACPI specific config that applies to all the AMD SoCs. Stoney doesn't currently use this, but we can add that functionality later. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0be7d917d7c5ba71347aa646822a883e2cf55743 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50557 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mb/amd/majolica: Add FCH IRQ routingRaul E Rangel
I left most everything as NC since we don't expose the values to the OS yet. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7c3195ef27091f1bc61892c475ffe09137b63083 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50511 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mb/google/slippy: Factor out SPD indexingAngel Pons
The code to read the SPD file and index it is not variant-specific. Change-Id: Ifaedc39b683901b60abbb1d984f1d38c1ed364e2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50542 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12haswell boards: Correct USB config indentationAngel Pons
Change-Id: I72b717a41c5611cf578ce178722029b8646cbb35 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50539 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12haswell: Drop `mainboard_fill_pei_data`Angel Pons
Use global variables to provide mainboard USB settings, and have the northbridge code copy it into the `pei_data` struct. For now. To minimize diffstat noise, this patch does not reindent the now-global mainboard USB configuration arrays. This is cleaned up in a follow-up. Change-Id: I273c7a6cd46734ae25b95fc11b5e188d63cac32e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50538 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mb/msi/h81m-p33: Add new mainboardAngel Pons
This is a µATX mainboard with a LGA1150 socket and two DDR3 DIMM slots. Working: - Both DIMM slots - Serial port to emit spam - Some USB ports - Integrated graphics (libgfxinit) - DVI - Realtek GbE - All PCIe ports - At least one SATA port - RAM initialization with MRC binary - Flashing with flashrom - S3 suspend/resume - VBT - SeaBIOS 1.14 to boot Arch Linux (kernel linux-5.10.15.arch1-1) Broken: - Audio. It doesn't work on stock firmware either. I suspect the codec hardware on my board is dead. Untested: - PS/2 mouse - EHCI debug - Front USB headers - Non-Linux OSes - TPM header - VGA Change-Id: I9e47747a99c65e488487fbbcac1de15b9bf5c235 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41260 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mb/google/volteer: Correct AT24 NVM address sizeDaniel Kang
Currently, the address size field of AT24 NVM is incorrect, and Linux v5.4 kernel logs the message below: at24 i2c-PRP0001:02: Bad "address-width" property: 13 The valid size of the AT24 NVM is 16 bits so modify the value from 0x0D to 0x10. BUG=b:177655681 BRANCH=none TEST=Boot volteer and check the kernel log and see "Bad address-width" error message is not shown. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: Ice6c3eac1e023b981217e1d7dc06587fc46b1a02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Bingbu Cao <bingbu.cao@linux.intel.com>
2021-02-12mb/purism/librem_mini: move mainboard asl under variantMatt DeVillier
Upcoming librem_cnl variant(s) won't share mainboard asl. Change-Id: I9c2c43e5ae5efe161cc2135c920a1b9dee5a1317 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-12mb/up/squared: Select NO_UART_ON_SUPERIOPatrick Rudolph
Change-Id: I4c1cadb6d38ffd3f9eddcd1292c2e6aea08791d0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49395 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mb/gigabyte/ga-h61m-series: Drop useless `mainboard.asl`Angel Pons
Was copy-pasted from another board and is completely useless. Change-Id: Iedb03284b4509597cff5d39dda4f98669f2e814b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-12mainboard: Drop unneeded `default_brightness_levels.asl`Angel Pons
Desktop boards do not have any backlight control. Change-Id: Ie9f5f4d7e6ae09b3d664d53e4c03157fd4ed088e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-12my boards: Do not include `superio.asl` twiceAngel Pons
The southbridge ASL already includes this file. Change-Id: I492d4c860a50ac98acbcb3a51fa4d47c94baade3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-12sandybridge MRC boards: Drop channel disable masksAngel Pons
Platform code will overwrite these values anyway, so do not program them in mainboards. Change-Id: I7571d336a1402c6cfae5835a95dc706a28106271 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49751 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mb/razer/blade_stealth_kbl: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ifdc3f061d919c8db9001c7a4cc26eb21117958d7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-02-12mb/system76/lemp9: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ice096777077bd2e9cfbaf744371fc372c0c05606 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-02-11sb/intel/ibexpeak: Drop Global NVS supportAngel Pons
Was copy-pasted from bd82x6x and no mainboard actually needs it. The few globals moved outside the GNVS will be removed, relocated or replaced with acpigen later. Change-Id: I590a355f1bd1e54365b2e329cfdc62384446a15c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49280 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11sb/intel/i82801jx: Drop Global NVS supportAngel Pons
Was copy-pasted from i82801ix and no mainboard actually needs it. Change-Id: I400424540b52dc5d43aba15720b18ad57ea2ebda Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49279 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11ACPI: Move PICM declarationKyösti Mälkki
Variable PICM was not inside GNVS region and can use a static initialisation value. For most AMD platforms PICM default changes from 1 to 0. Fix comments about PICM==0 used to indicate use of i8259 PIC for interrupt delivery. Change-Id: I525ef8353514ec32941c4d0c37cab38aa320cb20 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49905 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11sb,soc/intel: Drop OSYS from GNVSKyösti Mälkki
The value should be set by OSPM using some combination of _OSI() queris in the \_SB._INI() method. To maintain previous behaviour with this commit, boards where GNVS osys initialisation was removed now do the same in ASL. Change-Id: Id4957b12a72fbf7fa988e7ff039e47abcc072e1c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49353 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11mainboards: Drop PWRS from GNVSKyösti Mälkki
Initialize variable to 1 to indicate AC power supply. If platform has EC it will set this correctly based on whether plugged on the charger or not. Change-Id: I3f834cf7563b9e512fcab34cdb7a27a9f0fd31c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49352 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11mb/amd/majolica: Add chromeos supportRaul E Rangel
This change enables vboot support. To use it add CHROMEOS=y to your config. TEST=Boot majolica and see verstage run, and then see depthcharge load. coreboot-4.13-1730-g881092709a5e Fri Feb 5 23:50:28 UTC 2021 verstage starting (log level: 8)... Phase 1 FMAP: area GBB found @ 805000 (458752 bytes) VB2:vb2_check_recovery() Recovery reason from previous boot: 0x0 / 0x0 Phase 2 Phase 3 FMAP: area GBB found @ 805000 (458752 bytes) FMAP: area VBLOCK_A found @ 30000 (8192 bytes) FMAP: area VBLOCK_A found @ 30000 (8192 bytes) VB2:vb2_verify_keyblock() Checking keyblock signature... VB2:vb2_verify_digest() HW RSA forbidden, using SW VB2:vb2_rsa_verify_digest() HW modexp forbidden, using SW FMAP: area VBLOCK_A found @ 30000 (8192 bytes) FMAP: area VBLOCK_A found @ 30000 (8192 bytes) VB2:vb2_verify_fw_preamble() Verifying preamble. VB2:vb2_verify_digest() HW RSA forbidden, using SW VB2:vb2_rsa_verify_digest() HW modexp forbidden, using SW Phase 4 FMAP: area FW_MAIN_A found @ 32000 (3137280 bytes) VB2:vb2api_init_hash() HW crypto forbidden by TPM flag, using SW VB2:vb2_verify_digest() HW RSA forbidden, using SW VB2:vb2_rsa_verify_digest() HW modexp forbidden, using SW Saving secdata firmware Saving secdata kernel Saving nvdata Slot A is selected FMAP: area FW_MAIN_A found @ 32000 (3137280 bytes) CBFS: mcache @0x02017000 built for 9 files, used 0x1ec of 0x800 bytes CBFS: Found 'fallback/romstage' @0x0 size 0x753c in mcache @0x02017000 BS: verstage times (exec / console): total (unknown) / 116 ms coreboot-4.13-1730-g881092709a5e Fri Feb 5 23:50:28 UTC 2021 romstage starting (log level: 8)... Family_Model: 00a50f00 FMAP: area FW_MAIN_A found @ 32000 (3137280 bytes) CBFS: Found 'fspm.bin' @0x15440 size 0x2257d in mcache @0x02017138 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I43f0c6e33649332057f41f8813a86571b06032f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-02-11src: Remove unused <cpu/intel/model_206ax/model_206ax.h>Elyes HAOUAS
Change-Id: I67862a6a5110e2cab4f77388caa702494e4d71c9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-11src: Remove unused <arch/cpu.h>Elyes HAOUAS
Change-Id: I1112aa4635a3cf3ac1c0a0834317983b4e18135a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-11src/mainboard: Remove unneeded whitespace before tabElyes HAOUAS
Change-Id: I37f12f5cb35ea1a6ad33edb114688ce1619030a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-11mb/google/volteer/variants: Remove unneeded whitespace before tabElyes HAOUAS
Change-Id: I4c991e6119f14d949a2e103024132d70674f29a1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-11mb/amd/mandolin/Kconfig: Remove unneeded whitespace before tabElyes HAOUAS
Change-Id: I2b52c32a607386cdc1ca00531eda4dfc0bfaab1e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-11mb/google/zork: modify ELAN TP i2c IRQ to LEVEL active for dirinbozKevin Chiu
configure IRQs as level triggered to prevent TP lost. BUG=None BRANCH=zork TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on, suspend DUT to check TP is functional Change-Id: I81ffa889fbdfb01bf3057a8258fb4dd4ad7e88d5 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50420 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11Revert "mb/intel/shadowmountain: Add the ASL code"Patrick Georgi
This reverts commit 2151f7561d728a9280d69d20ef56a9fe44db7cb1. Reason for revert: It depends on the shadowmountain ramstage patch. Error on the builder: IASL /cb-build/coreboot.0/default/INTEL_SHADOWMOUNTAIN/dsdt.aml src/mainboard/intel/shadowmountain/dsdt.asl:4:10: fatal error: baseboard/ec.h: No such file or directory #include <baseboard/ec.h> ^~~~~~~~~~~~~~~~ compilation terminated. Change-Id: I9fa5e8cc2ad485bf82bfbda151bc46d26faef7ab Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-11mb/intel/shadowmountain: Add the ASL codeV Sowmya
This patch includes the DSDT ASL code for shadowmountain board. BUG=b:175808146 TEST= Boot shadowmountain board, dump and verify the DSDT ASL entries. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I511b2d23c424b0565ad1abcc3b41cace1b89936e Reviewed-on: https://review.coreboot.org/c/coreboot/+/49733 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10mb/google: order matters in mem_parts_used.txtPaul Fagerburg
* Add comments to mem_parts_used.txt to point out that the order of the entries matters when assigning IDs, so always add a new part to the end of the file. * Update existing mem_parts_used.txt to add the same comment. * No updates to Zork variants, because they use an optional ID, so the order actually doesn't matter there. BUG=b:175898902 TEST=create a new variant of dalboz, trembyle, volteer, waddledee, or waddledoo, and observe that mem_parts_used.txt has the new verbiage. Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: Iffbd8e69a89b1b7c810c5d25c7a6148d459d8b02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-02-10mb/google/poppy/var/baseboard: Convert to ASL 2.0Elyes HAOUAS
Change-Id: Ic3d0ea9893c3c25305e2da94681cb5ac466782fc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50321 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10mb/intel/wtm2: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' files are same. Change-Id: Id68623cfb57e889e60d66cd465612336cd8298ca Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-02-10mb/google/zork: modify ELAN TS i2c IRQ to LEVEL active for dirinbozKevin Chiu
EDGE IRQ from TS might be invalid to HOST, configure IRQs as level triggered to prevent TS lost. BUG=b:179594439 BRANCH=zork TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on, suspend DUT to check TS is functional Change-Id: Ibbbc73b37932ba1359ffe6f572a15564bb341025 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50416 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10mb/google/zork/var/shuboz: Adjust touchscreen settingsKane Chen
Modify GPIO_140 delay time and add "disable_gpio_export_in_crs" to meet touchscreen controller power on sequence. BUG=b:174442484 BRANCH=master TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I36a7055b7be0963479f8a0f4dc49c92bc8fbdc9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/50228 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10mb/google/zork/var/shuboz: Modify touchpad setting for JelbozKane Chen
Since Jelboz support number pad, due to one single coreboot for both Jelboz and Shuboz, modify "overridetree.cb" setting to number pad support for Jelboz. BUG=b:174964012 BRANCH=master TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ie0219419834b34b6eac589f28d3604f5f1b65679 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-02-10nb/intel/sandybridge: Use common {DMI,EP,MCH}BAR accessorsAngel Pons
Drop unused sandybridge.h includes to avoid build failures on Ironlake. Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 remains identical. Change-Id: If2f0147fe50266e2fe2098cafdf004e51282f5e2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-10mb/intel/adlrvp/bootblock.c: Remove unused includesElyes HAOUAS
Change-Id: I73234da6e77f83c6aeb5c40cf6ffdb3cccc4074c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-10mb/emulation/qemu-q35/bootblock.c: Remove unused includesElyes HAOUAS
Change-Id: I568c7260f838c03c285f2afc0e20794c06a47645 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-10mb/gizmosphere/gizmo2/bootblock.c: Remove unused includesElyes HAOUAS
Change-Id: Ibdc94e59ffa345670bbed246e94b02a7148a1971 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-10mb/google/volteer/var/voxel: Add settings for noise mitgationSheng-Liang Pan
Enable acoustic noise mitgation for volteer platforms. BUG=b:179328166 BRANCH=none TEST= Measure the change in noise level by changing the values in devicetree. Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I279a85c7741094bb7ddf0c1fde74b31189b12171 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-02-10mb/google/volteer: Enable external bypass, clkgate & phygateShreesh Chhabbi
This change sets the soc config options for external_bypass, external_clk_gate and external_phy_gate. BUG=b:177821896 TEST=Build coreboot for volteer Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Change-Id: I9e5218cda79d7453bf830639ccea4e5be019b070 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50290 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10mb/google/zork: devicetree: Fix typo in *Coprocessor* in commentPaul Menzel
Fixes: b3c41329fd (mb/google/zork: Add Picasso based Zork mainboard and variants) Change-Id: I68cd5ffc3117e714919bbce56e9af4c9982b3d54 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-10mb/prodrive/hermes: Set Port C VREF as per EEPROM configAngel Pons
Configure Port C VREF according to the settings in the EEPROM. Change-Id: I5b4f0d91fc30c6b585434b9450544281f4411ff4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50396 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10mb/prodrive/hermes: Configure 'internal audio'Angel Pons
Implement `mainboard_azalia_program_runtime_verbs` to configure the Realtek ALC888 codec according to the settings in the EEPROM. The encoding of the `internal_audio_connection` field is: 0: Disabled 1: Front HP out 2: Internal speaker Change-Id: I5e0013217838888977aaa9259e0cfb78c82f719f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-10mb/prodrive/hermes: Set mb_hda_amp_enable based on cfgPatrick Rudolph
Change-Id: I13c2ece729128fe245de88c0d36ce7b4bcaf6b6d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-10mb/prodrive/hermes: Drop reset functionsPatrick Rudolph
The reset GPIOs are already configured in bootblock. Drop the unused ramstage code. Change-Id: Ic99fcae2a3f00be7eebd7be618df838522dac69f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-10mb/siemens/mc_apl2: Switch I2C bus for RX6110SAMario Scheithauer
With a new HW revision of this board, the connection of the external RTC RX6110SA was changed from I2C bus 0 to I2C bus 3. Change-Id: I10dd44949973ea490b3c7e4ad83d56ce2e566adf Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-10mb/amd/gardenia: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I8c8845ed6eb466acff568247184c6ad6b186e9ec Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46145 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10mb/amd/olivehill: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: Icacd8c8a7b5604354a7fd04ed73ecb3bbc86e669 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46147 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10mb/jetway/nf81-t56n-lf: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' are same. Change-Id: I16eceec980c10e77f2a0aec9a420437d03fc2352 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46187 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10mb/amd/persimmon: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' files are identical. Change-Id: I492118c9287b5853e8784a6de6bc514e97c93e96 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46150 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10mb/amd/south_station: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' files are identical. Change-Id: I52c33679fbb7e9807423fc0fcc470e54105013db Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46151 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10mb/amd/union_station: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated build/dsdt.dsl are identical. Change-Id: I8127b5b22e2822f4ace07c28409e501c3fcb309b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46153 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 12:51:45 +0000