summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2020-08-19mb/google/zork: remove unused asl files for dirinbozKevin Chiu
BUG=b:161579679 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully Change-Id: I713ac3a47c2d47035affb32e6c604b9af23aa90e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-19mb/google/zork: Adjust Dirinboz I2C valuesKevin Chiu
BUG=b:164757545 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully 3. measure i2c freq by scope is close to 400kHz Change-Id: Icb27ff8a4960caaebc542ee4e507f1611da5a77e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-18mb/amd/mandolin: enable SoC UARTs 0 and 1 and disable 2 and 3Felix Held
There are only headers for the SoC's UART 0 and 1 on the board. BUG=b:165020060 TEST=Linux only detects UART 0 and 1. Change-Id: I45929f65a5f844ae5cef792b11176f487c80766f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44530 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18mb/amd/mandolin: select ACPI driver for internal memory mapped UARTsFelix Held
In order for Linux to find and use the SoC's integrated UARTs, they need to be exposed in ACPI. BUG=b:165020060 TEST=Linux detects the SoC's integrated UARTs. Change-Id: Iaa66657b88f62b2067c865c3e1945b7bdbf9be23 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18mb/amd/mandolin: use SoC UART for console if LPC UART isn't presentFelix Held
Using the SOC's UART 0 as console requires moving a few resistors on the Mandolin board. BUG=b:165020060 TEST=coreboot console works on SoC UART 0 when AMD_LPC_DEBUG_CARD isn't selected. Change-Id: Idaf73ae84f54028da2182ce42035f9ecd63f4776 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18mb/google/zork: Clean up bt reset_gpio removalRob Barnes
Clean up of bt reset_gpio removal function. TEST=Boot and observe log showing bt reset_gpio was removed BUG=b:157580724 - Add reset_gpio for Bluetooth Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I1d40ad16dd3c624d4be89d9eea1835cc4e72c03d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44273 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18mb/google/volteer: Configure DP_HPD as PAD_NC and disable DdiPortHpdJohn Zhao
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function (NF1) without internal pull-down which wrongly presents HPD interrupts. DP_HPD had been removed for EVT design as those events are through eSPI. This change configures GPP_A19 and GPP_A20 to be no connection and disables DdiPort1Hpd and DdiPort2Hpd. BUG=b:162566436 TEST=Booted to kernel and verified no kernel HPD pins assertion message on Volteer EVT board. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ia3245741b776b75073d2b43d36c8ea40b476b3ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/44501 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18mb/google/dedede: Fix S3 wake using trackpadMeera Ravindranath
Configure TRACKPAD_INT_ODL pad reset config to DEEP and map PMC_GPE_DW to PMC_GPP values. TEST=System should wake from S3 via trackpad Change-Id: I58ce3720e0fdeefb2c9440bb3006897ef80211ea Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-08-18src: Remove unused 'include <delay.h>'Elyes HAOUAS
Change-Id: I6afea5c102299e570378a1656d3dcd329a373399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44093 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused '<option.h>'Elyes HAOUAS
Change-Id: Icb79d60e9ec70a0780d5231698b88cff1db72c9b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unused 'include <stddef.h>Elyes HAOUAS
Change-Id: Iae1e875b466f8a195653d897efa1b297c61ad0a5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41912 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unneded whitespace before tabElyes HAOUAS
Also remove unneded tab in 'picasso/Makefile.c' file. Change-Id: Id25b2d308645c449c205b3a946f89b6b6de62a47 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18mb/purism/librem_whl: Add new board Librem Mini (WHL-U)Matt DeVillier
Add new librem_whl baseboard and Librem Mini variant. Tested with SeaBIOS, Tianocore, and Heads payloads. All functions working normally except SATA, which is limited via a FSP UPD to 3Gbps until the correct HSIO PHY settings can be determined. https://puri.sm/products/librem-mini/ Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I36af42766f85eb17f86f6ec9b48b87125fb911e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18mb/prodrive/hermes: Enable LPSS ACPI driverPatrick Rudolph
Enable the introduced LPSS ACPI uart driver. Tested on Hermes using Linux 5.6: The UART2 appears as /dev/ttyS2. Change-Id: Ic15be4a807012216e52c848120de7e39522f57b7 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-17mb/google/volteer: Make devicetree default as Aux Orientation retimer controlledBrandon Breitenstein
With new board designs being introduced it does not make sense for the default devicetree setting to be retimer disabled on port 0 for Aux Orientation. Change the default to be Aux Orintation retimer controlled on all ports and move the SOC controlled overrides to the corresponding overridetree files. BUG=NONE BRANCH=NONE TEST=Built image for delbin and verified that port 0 flip is working. Change-Id: I5ff59493472db096c027d223f2fd61545dc935e2 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2020-08-17mb/google/zork: Switch to normal read mode for EM100Furquan Shaikh
This change sets the EFS config for SPI read mode to normal read mode when using em100. With this, the boot is stable again without any random hangs in PSP. BUG=b:164429022 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4cd3673dcc44a61905719a57f734df2fb9f4e6e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-17mb/intel/jasperlake_rvp: Configure GPIOs related to UFCPandya, Varshit B
This change configures user facing camera related GPIOs as per schematics. 1. GPP_D5 pwr_en 2. GPP_B14 reset 3. GPP_E0 clock 4. GPP_D12 I2C4b 5. GPP_D13 I2C4b Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: I026c16f73cf597614efaea3e0f0ab1e2cfe1e211 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44416 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17mb/google/dedede/var/magolor: Generate SPD ID for supported partsRen Kuo
Add supported memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: MT53E512M32D2NP-046 WT:E K4U6E3S4AA-MGCR H9HCNNNBKMMLXR-NEE MT53E1G32D2NP-046 WT:A K4UBE3D4AA-MGCR And also remove the deprecated by cl#43989 https://review.coreboot.org/c/coreboot/+/43989 BUG=None TEST=Build the magolor board Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I3348b7fbeff038b85e7d3c9137517e05a35bf3dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/44408 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17mb/tglrvp: Update SPD files for HynixAnil Kumar
- Increase DDR Frquency limit to support data rate 4266 Mbps Bug=None Test=Build and boot on tglrvp hardware; $dmidecode --type 17 reflects memory Speed = 4266 Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I8185ebbaa32a01fee104bc0b757fc4adb58bba97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44149 Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.corp-partner.google.com> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17mb/up/squared: Increase MAX_CPUS from 2 to 4Reto Buerki
The board also supports Atom processors, which have four physical cores. Signed-off-by: Reto Buerki <reet@codelabs.ch> Change-Id: I98a3da660052eb7ad2f18b0c7fc0e67a609eac54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-08-17mb/google/zork: adjust i2c2 data hold time for TPKevin Chiu
current setting got 0.278us which is less than the min 0.3us. increase i2c2 data hold time for TP. BUG=b:163613330 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. data hold time measured by scope: 0.3805us Change-Id: I2d564983383c17ed43cc5cc5aaff0fcd67ce6928 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17mb/google/volteer: Define stop_gpio for goodix touch screenCaveh Jalali
This applies to the goodix touch screen on both the volteer and volteer2 variants: Define GPP_E3 as the stop_gpio for the touch screen "Report_Switch" signal. Goodix defines a 1ms (minimum) delay after stop off. In addition, no longer drive this GPIO high by default as it is now controlled by the kernel through ACPI. BUG=b:153705232 TEST=touch screen still functional on volteer; confirmed timings with scope (VDD, RESET, REPORT_SWITCH) Change-Id: I3ead9cf79812d08c4917be4585ed273050465a9b Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-17mb/intel/jasperlake_rvp: Re-organize the FMAP layoutKarthikeyan Ramasubramanian
More space is required in the COREBOOT CBFS to accommodate some features. Currently no alternate firmware is stuffed into RW_LEGACY CBFS and has ~1 MB of unused space. Borrow some space from RW_LEGACY CBFS and extend the RO_SECTION. Even within RO_SECTION, GBB requires only 12 KiB. So adjust the GBB region accordingly and extend the COREBOOT CBFS. BUG=b:162159386 TEST=Build the JSLRVP mainboard. Change-Id: Ia8bb381c31ddf76f3211f9d4ac5c8c18c27834b7 Signed-off-by: Karthikeyan Ramasubramanain <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-08-17mb/hp: select TPM and TPM1 for all EliteBook laptopsIru Cai
All the Sandy/Ivy Bridge EliteBook and ProBook laptops currently supported by coreboot and on review all support TPM 1.2 according the maintenance and service guide manuals of these laptops. So select the Kconfig options of TPM and TPM 1.2 and add the entry of it to the common device tree. The device tree C source files of 8460p generated by sconfig before and after this change are compared. All the device nodes still exist with nodes under LPC having different device number. Tested with 2560p, which still works without problems, and the TPM can be detected and used in the system. Change-Id: Ic6158d3346a55e3d09c0a4ced9fd141b9a6c4256 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-17mainboard: Add HP EliteBook 2560pIru Cai
Most of the code is generated by autoport. The laptop works well under coreboot with SeaBIOS 1.13.0 payload, running Arch Linux with kernel 5.4.39 and 5.6.11. Change-Id: I126916e201fb8e4b9067f2dececebfb5bae6df73 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-17x4x boards: Remove unused/deprecated cmos bitsArthur Heymans
Receiver enable results are now saved in flash. Change-Id: Ib1a985147b081860c58d1649c4e50301b8144b0c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44251 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17mb/intel/jslrvp: Update SLP_Sx assertion widths and PwrCycDurV Sowmya
This patch updates the SLP_Sx assertion widths and power cycle duration for the Japerlake RVP. Power cycle duration: With default value, S0->S5 -> [ ~4.2 seconds delay ] -> S5->S0 With value set to 1, S0->S5 -> [ ~1.2 seconds delay ] -> S5->S0 BUG=b:159104150 TEST=Verified that the power cycle duration is ~1.2s with global reset on JSLRVP. Change-Id: Ie2a8d959d7ebbf9c24f8c4e8d5c68b70e0ac5708 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-08-17mb/google/dedede: Update the SLP_Sx assertion widths and PwrCycDurV Sowmya
This patch updates the SLP_Sx assertion width and power cycle duration for the dedede platforms. Power cycle duration: With default value, S0->S5 -> [ ~4.2 seconds delay ] -> S5->S0 With value set to 1, S0->S5 -> [ ~1.2 seconds delay ] -> S5->S0 BUG=b:159104150 TEST=Verified that the power cycle duration is ~1.2s with global reset on waddledoo. Change-Id: I7079cbd564288b5d5b69e07661434439365063d3 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-08-15mb: remove unnecessary FADT flag devicetree entries for PicassoFelix Held
Those flags already get unconditionally set in soc/amd/picasso/acpi.c. Change-Id: I978c7d67480499d92c193d5bb87bc876211187db Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-08-14mb/google/volteer: Only enable TBT root ports if USB4 is supportedBrandon Breitenstein
TBT ports should be disabled if the DB is a USB3 DB. It is assumed if the DB doesn't support USB4 the platform as a whole should only be USB3 capable and TBT functionality on both ports should not be enabled. BUG=NONE BRANCH=NONE TEST=Built coreboot and verified that TBT was disabled on platform with USB3 DB and enabled on platform with USB4/TBT DB Change-Id: I594f2e9483aaf896de2b6aea9a3460bd3826c58c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-14mb/google/dedede: Add a board specific resetKarthikeyan Ramasubramanian
When CSE Lite jumps from RO to RW, global reset is initiated. When AP is reset as part of global reset, TPM initialization fails. This is because AP reset is not detected by TPM hosting an older firmware version. Request Embedded Controller (EC) to perform AP reset so that TPM can detect that event. BUG=b:162290856, b:162386991 TEST=Ensure that the device boots to OS with the board-specific reset sequence when CSE Lite jumps from RO to RW with an older and newer Cr50 firmware. Cq-Depend: chromium:2337430 Change-Id: Ib1f7271130e0b4b68c7f0917ecc4eadba1486206 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-08-14mb/ocp/deltalake: enable VT-dJonathan Zhang
Update devicetree.cb to configure VT-d to be enabled. TESTED=booted on DeltaLake config A server, and verify DMAR table. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I7d76cd9d50d3e69a4919de281f11d30851bffa3f Reviewed-on: https://review.coreboot.org/c/coreboot/+/44281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-14soc/intel/xeon_sp/cpx: remove unsupported configsJonathan Zhang
coherency_support and ats_support are not supported by CPX-SP FSP. Remove them from soc_intel_xeon_sp_cpx_config struct. Remove corresponding settings from DeltaLake devicetree.cb. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ibe1c4e88817fc4be7915e95fa829f0a4c0d947f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-14mb/ocp/deltalake: Select CONSOLE_POSTJohnny Lin
Tested=On OCP Delta Lake, BMC SOL can see POST codes Change-Id: I2c27055475e6dadcd4282cd1bf191a1b83150f02 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-14mb/google/octopus/variants/casta: Disable xHCI compliance modeSeunghwan Kim
Disable xHCI compliance mode to prevent SS hub detection issue. BRANCH=firmware-octopus-11297.B BUG=none TEST=built Change-Id: I7a9bbc92565e752a8f8f4689519c100594596701 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44438 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-14mb/google/octopus: Set default value of ModPhyIfValue parameterSeunghwan Kim
Set default value of ModPhyIfValue parameter in FSPS_UPD. Without this setting, it will be set to '0' and system may not detect USB 3.0 device. BUG=b:163382089 BRANCH=firmware-octopus-11297.B TEST=Built Change-Id: Ide3d1637f99dba28251102f771b6ce370cc5d8e4 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-13mb/google/zork: Switch to using FW_CONFIG instead of SKU_IDBhanu Prakash Maiya
Currently sku_id is used to enable/disable eMMC as boot media on Dalboz. This patch will check eMMC bit in firmware configuration table to enable/disable eMMC. On Dalboz Proto and EVT devices with eMMC, there was an issue found after SMT. This patch checks for board_version instead of SKU_ID to configure eMMC in HS200. Configure HDMI based on daughterboard_id in FW_CONFIG. BRANCH=none BUG=b:152817444 TEST=Check eMMC is enabled or disabled based on the eMMC bit in FW_CONFIG. Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com> Change-Id: Ifa2a49a754d85fb6269f788c970bd9da58af1dad Reviewed-on: https://review.coreboot.org/c/coreboot/+/44421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-13mb/google/zork: Use FW_CONFIG to enable/disable eMMC on EzkinilBhanu Prakash Maiya
Currently SKU_ID is used to enable/disable eMMC as boot media on Ezkinil. This patch will check eMMC bit in firmware configuration table to enable/disable eMMC. BRANCH=none BUG=b:162344105 TEST=Check eMMC is enabled or disabled based on the eMMC bit in FW_CONFIG. Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com> Change-Id: I62318cf71ec70790f2d9e787febd1e0b787741fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/44423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-13mb/google/zork: Add helper function to read DB ID bits in FW_CONFIGBhanu Prakash Maiya
Add helper function variant_get_daughterboard_id() to read daughterboard id bits (0-3) in firmware configuration table in CBI. BRANCH=none BUG=b:162344105,b:152817444 TEST=Check if daughterboard id bits (0-3) can be read from FW_CONFIG. Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com> Change-Id: Ia3c882439bfbe6da28be2df0ec0c976d5c142677 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44424 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13mb/google/zork: Remove validity checks for FW_CONFIG in CBIBhanu Prakash Maiya
After confirming that all zork variants and phases have valid FW_CONFIG value in CBI, this patch is dropping FW_CONFIG validity checks like VARIANT_HAS_FW_CONFIG and VARIANT_BOARD_VER_FW_CONFIG_VALID in Kconfig and will also remove associated helper functions. BRANCH=none BUG=b:162344105,b:152817444 TEST=Check if FW_CONFIG bits can be read in coreboot and FW_CONIFG helper function do not return 0 if board has a valid FW_CONFIG in CBI. Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com> Change-Id: I633dc7c500ef8759f3fffb0db6b76d96257c3c9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/44422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-13mb/intel/tglrvp: Set gpio GPP_H1 for soundcard detectionShaunak Saha
This patch sets the GPP_H1 to PAD_CFG_GPO which is general purpose output with no pullup/down. We need this GPIO for the detection of soundcard in TGL RVP's. BUG=none BRANCH=none TEST=Build and boot tglrvp successfully. From "aplay -l" output check that soundcards are listed properly. Change-Id: Ic0ef33079af7940360c986efacabd6d367aad516 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-08-13mb/asus: Add Asus A88XM-E FM2+ with documentationBalazs Vinarz
The port is based on the F2A85-M, the main differences are: - 2 DDR3 dimms - 2 PS/2 ports - 2*USB2.0 and 2*USB3.0 ports - 3+2 phase VRM - 6 channel audio - 6 SATA ports - ASP1206 VRM controller - Bolton D4 chipset - no optical SPDIF/IO Successfully booted configurations: -RAM: 2*8GB Kingston KVR 1333Mhz LP, 2*8GB Crucial BLT8G3D1869DT1TX0 -CPU: AMD A8-6500 (Richland), AMD A10-6700 (Richland) -OS: Arch Linux 4.19 (SATA, USB), Linux Mint 19.3, Artix Linux 2019 -SeaBIOS: 1.12 and 1.13 Known problems: - IRQ routing is done incorrect way - common problem of fam15h boards - Windows 7 can't boot because of the incomplete ACPI implementation Change-Id: I60fa0636ba41f5f1a6a3faa2764bf2f0a968cf90 Signed-off-by: Balazs Vinarz <vinibali1@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30987 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13mb/google/volteer/var/halvor: Update dq/dqs mappingsFrank Wu
Update dq/dqs mappings based on halvor schematics. BUG=b:162892573 BRANCH=none TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Then boot Halvor successfully. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Id4ffcbd4f015afe6507ed2b1d562519c5b240409 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-08-13mb/google/volteer/halvor: Enable card reader function on HalvorFrank Wu
Configure gpio settings for enabling card reader function. BUG=b:153680359 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Verify that the sd card is mount on /dev/mmcblk0 successfully. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I51752f47bc8d31d3a11da728ce00ca754381fde9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44169 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13mb/google/asurada: Add new MT8192 mainboard "Asurada"CK Hu
The placeholder functions and build rules for generating a minimal firmware to run on MT8192 SOC based mainboard "Asurada". Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: Ic7c8bc8a4bba40d1b511823e09945be52198b247 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43963 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13mb/google/zork: Update PICASSO_FW_*_POSITION to match new layoutFurquan Shaikh
CB:44362 ("mb/google/zork: Reorganize chromeos.fmd to increase WP_RO to 8MiB") updated the flash layout which moved RW_SECTION_A and RW_SECTION_B to different addresses than before. PICASSO_FW_A_POSITION and PICASSO_FW_B_POSITION configs need to be updated accordingly to retain the same behavior as before i.e. amdfw_a/b are placed at the start of FW_MAIN_A/B by placing them right after the CBFS header. This change fixes the value of PICASSO_FW_A_POSITION and PICASSO_FW_B_POSITION to maintain amdfw at the start of RW-A/B CBFS. BUG=b:161949925 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I177fb38af6380c36397d2a72d5ec00965087d528 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44425 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13mb/google/zork: Disable ACP I2S wake for schematic version 3.6+Furquan Shaikh
Starting with v3.6 of reference schematics, headphone jack interrupt is moved to a standard GPIO instead of using CODEC_GPI. Thus, we no longer need I2S wake to be enabled in the ACP for boards using v3.6+ version of schematics. This change sets `acp_i2s_wake_enable` and `acp_pme_enable` to default 0 in baseboard devicetrees and overrides to 1 in update_hp_int_odl() if the board is still using older version of reference schematics. BUG=b:159934887 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I44b40db95b5148fe483c7340c5bd0d58627970a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44403 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-12mb/intel/tglrvp: Add interrupt _CRS under CREC scopeJohn Zhao
Interrupt _CRS is missing under CREC scope. TGLRVP U/Y has GPP_A15 assigned to MECC_HPD2 as EC_SYNC_IRQ. Configure this GPP_A15 GPIO as active low and level interruptible for EC sync interrupt configuration. BUG=None TEST=Booted to kernel and verified EC_SYNC_IRQ in the scope of CREC current resource settings. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Idfe4d4e800866805ee8d758028ac7ddf4b259faa Reviewed-on: https://review.coreboot.org/c/coreboot/+/44103 Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-12mb/google/volteer/halvor: Update settings for WiFi/BT functionsFrank Wu
Configure gpio/overridetree settings for WiFi/BT functions. Then WiFi/BT functions are enabled on Halvor. BUG=b:153680359, b:163004808 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Verify that WiFi/BT can scan devices successfully. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I085b192bb768c2c1238f3f857d315502ac10857e Reviewed-on: https://review.coreboot.org/c/coreboot/+/44372 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-12mb/google/zork: expose stop gpio for trembyleAaron Durbin
In CB:43701 the trembyle touchscreen parameters were not updated to expose the stop gpio properly. BUG=b:162973325 Change-Id: I6f5da1c556ba1c6ccabf699491d3b635aa79f7c0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-12mb/google/dedede/variants/drawcia: add DTT supportSumeet R Pawnikar
Add DTT (Dynamic Tuning Technology) support on Jasper Lake based drawcia system. Add information on sensors, power limits and tcc_offset for DTT based thermal control. BRANCH=None BUG=b:161993459 TEST=Built for dedede system Change-Id: If50052864fb246a6a8f7d96fa50529e5f55968c0 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-12sb/intel/i82801jx/sata.c: Drop always-false is_mobile checkAngel Pons
Also remove the meaningless `sata_traffic_monitor` devicetree option. Function parameters will be removed in a reproducible follow-up. Change-Id: I70cf1e06cc8ace504a22be9f9c4441e3070f9e29 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-12volteer: Create lindar variantJulia Tsai
Create the lindar variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.2). BUG=b:161089195 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_LINDAR Signed-off-by: Julia Tsai <julia.tsai@lcfc.corp-partner.google.com> Change-Id: I08923cde932b7304bcb01cd747530c87949e4692 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-12mb/prodrive/hermes: Add multifunction device for UART 2Christian Walter
On CNP-H, only four I2C controllers are available, so PCI devices 19.0 and 19.1 are missing. However, PCI device 19.2 still exists as UART 2. That function 0 is missing means UART 2 can only be used in ACPI mode. Both devices need to be marked as hidden on the devicetree so that the allocator takes UART 2 into account. Change-Id: Ie77198cc0327414b9f88cf15ba4efaddb4f5cca4 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-08-12mb/google/zork: Reorganize chromeos.fmd to increase WP_RO to 8MiBFurquan Shaikh
This change reorganizes flash map layout for zork to allow WP_RO to grow to 8MiB. This is to allow more space for the firmware UI screens in RO. Following changes are made in the layout: 1. MRC_CACHE_HOLE is dropped since only one slot of 64K is used for MRC cache. Next section can start on 64K boundary immediately after MRC cache. 2. RW_SECTION_A and RW_SECTION_B are dropped down in size to 3MiB each. Each region is currently at ~2MiB of usage. 3. RW_ELOG is restrictred to 4KiB as that is the maximum elog size supported by coreboot. 4. SMMSTORE is restricted to 4K. 5. RW_LEGACY region is dropped down to ~1.9MiB. BUG=b:161949925 TEST=Verified that write-protection for RO still works fine, device boots in recovery and non-recovery mode. Also, verified that the dump of fmap looks correct: dump_fmap -h firmware/image-trembyle.serial.bin name start end size WP_RO 00800000 01000000 00800000 RO_SECTION 00804000 01000000 007fc000 COREBOOT 00875000 01000000 0078b000 GBB 00805000 00875000 00070000 RO_FRID 00804800 00804840 00000040 FMAP 00804000 00804800 00000800 RO_VPD 00800000 00804000 00004000 RW_LEGACY 0061d000 00800000 001e3000 SMMSTORE 0061c000 0061d000 00001000 RW_NVRAM 00617000 0061c000 00005000 RW_VPD 00615000 00617000 00002000 RW_SHARED 00611000 00615000 00004000 VBLOCK_DEV 00613000 00615000 00002000 SHARED_DATA 00611000 00613000 00002000 RW_ELOG 00610000 00611000 00001000 RW_SECTION_B 00310000 00610000 00300000 RW_FWID_B 0060ff00 00610000 00000100 FW_MAIN_B 00312000 0060ff00 002fdf00 VBLOCK_B 00310000 00312000 00002000 RW_SECTION_A 00010000 00310000 00300000 RW_FWID_A 0030ff00 00310000 00000100 FW_MAIN_A 00012000 0030ff00 002fdf00 VBLOCK_A 00010000 00012000 00002000 RW_MRC_CACHE 00000000 00010000 00010000 SI_BIOS 00000000 01000000 01000000 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I882f3d813c08ba5fb0ad071da4f79e723296f4b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com>
2020-08-12mb/google/kukui: revise per-device memory mapping tableHung-Te Lin
In order to help identifying right DRAM info (especially in user space), we want to unify the mapping table and do the device-specific mapping by a virtual offset based on build config. BUG=b:161768221,b:159301679 BRANCH=kukui TEST=emerge-jacuzzi coreboot Change-Id: If89bf18c48d263deb79df3e7a60c33bec000d8a3 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-08-11vendorcode/intel/fsp/fsp2_0/CPX-SP: remove non-existing PSTACKsJonathan Zhang
CPX-SP has a CSTACK and 3 PSTACKs. Clean up the HOB header file to remove reference to non-existing PSTACKs. Adjust mainboard code accordingly. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ic52b01cd89fb5b3fce64686d91f017f405566acd Reviewed-on: https://review.coreboot.org/c/coreboot/+/44279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-11mb/google/zork: config ddi for dirinbozKevin Chiu
dirinboz does not support native HDMI, config DDI as below: DDI0: eDP DDI1: DP DDI2: DP BUG=b:161579679 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully Change-Id: I9dffdf5654680e3c2c0b259ee82a471f8ff14f56 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-11mb/google/zork: fix incorrect DRAM SPD table load for dirinbozKevin Chiu
BUG=b:161579679 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully Change-Id: Ia736b0f25824eebe4ef25a11646f82963611e3b3 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-11mb/google/zork: move USB OC pin mapping to trembyle base boardFelix Held
The USB OC pin mapping is similar enough to move it to the base board and just have two overrides for trembyle, which is based on an older version of the schematics, and one override for woomax, which doesn't use one USB port. BUG=b:163081097 Change-Id: I7e305d7e6f51d7ef7a4c699e3bacc6bcd699d2f2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-08-10mb/google/volteer: Pull up GPP_D16 instead of driving itCaveh Jalali
The latest realtek RTS5261 SD daughterboard exposes the PRSNT# pin to GPP_D16 but there is a RTS5261 requirement to pull up this pin and not drive it at power on. We can meet this requirement without breaking other boards by changing GPP_D16 to be a no-connect with an internal pull up. Other boards use this signal as an enable input, so changing this to pull up is OK. BUG=b:162722965 TEST=Verified RTS5261 and GL9755 daughterboards enumerate on PCI and can read SD cards. Change-Id: I096d76ec12b7c3afaf02e621fd301b6704913d5d Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-10mb/google/volteer/var/terrador: Update gpio settings for Proto2David Wu
Based on latest schematic and gpio table of terrador, update gpio settings for terrador Proto2. BUG=b:151978872 TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I64b4fcbaabc487206d14d794af319e6df6f99581 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-08-10mb/tgl: Enable SaGv for TGL-UP3 RVPShreesh Chhabbi
BUG=none BRANCH=none TEST=Build and boot TGL-UP3 RVP with QS silicon successfully. Change-Id: I5b84457a1455edfe500ce80ba7f7ca6ccce43666 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43276 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-10mb/lippert: Put files under variants/Angel Pons
This isn't reproducible for some reason, but it is relatively simple. Change-Id: I507229be71ac2c589c7ecd81495d38ce363d26a7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43275 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-10mb/lippert: Unify mainboardsAngel Pons
Do it quick and dirty but in a reproducible manner. Variants will be set up properly in subsequent commits. Tested with BUILD_TIMELESS=1, both Lippert FrontRunner-AF and Toucan-AF remain identical. Change-Id: I71ff50099787e7806a9ab67429890a1c77061929 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43274 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-08mb/google/zork/trembyle: comment why USB OC pin mapping is differentFelix Held
Change-Id: I68b7529733e604ac45919a54e094be7eeb044458 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-08soc/intel/skylake: Enable CIO depending on devicetree configurationFelix Singer
Currently, CIO gets enabled by the option Cio2Enable, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the CIO controller. All corresponding mainboards were checked if the devicetree configuration matches the Cio2Enable setting, and missing entries were added. Change-Id: I65e2cceb65add66e3cb3de7071b1a3cc967ab291 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44032 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-08soc/intel/skylake: Enable SA IMGU depending on devicetree configurationFelix Singer
Currently, SA IMGU gets enabled by the option SaImguEnable, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the SA IMGU controller. All corresponding mainboards were checked if the devicetree configuration matches the SaImguEnable setting, and missing entries were added. Change-Id: I293a20a321c75f82a57cbd5339656d93509b7aa6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-08soc/intel/skylake: Enable SDXC depending on devicetree configurationFelix Singer
Currently, SDXC gets enabled by the option ScsSdCardEnabled, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the SDXC controller. All corresponding mainboards were checked if the devicetree configuration matches the ScsSdCardEnabled setting, and missing entries were added. Change-Id: I298b7d0b0fe2a7346dbadcea4be22dc67fce4de8 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-08mb/asrock/h110m: remove unused Device4Enable from devtreeMaxim Polyakov
This option has been removed from the parameters structure for Intel Skylake CPU (commit 9c1c009). Change-Id: I9dc6649ad693d18fdc85046ebbcc730a17fed0bf Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner
2020-08-07mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OSMartin Roth
This reverts the code from commit 728c0787f2 that removes the reset GPIO from the touchscreen ACPI interface. That patch exposes a bug which leads to an invalid opcode trap in the touchscreen code. Reverting this gets the system working again, but is not a long-term solution. BUG=b:162596241 TEST=System boots to login screen. Change-Id: I57a070d94f961cec43834c8bedd5dafc8a54171a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43078 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07soc/intel/skylake: Enable thermal subsystem depending on devicetreeFelix Singer
Currently SA thermal subsystem gets enabled by the option Device4Enable, but this duplicates the devicetree on/off options. Therefore depend on the devicetree for enablement of the SA thermal subsystem controller. All corresponding mainboards were checked if the devicetree configuration matches the Device4Enable setting, and missing entries were added. Change-Id: I7553716d52743c3e8d82891b2de14c52c6d8ef16 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44026 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07soc/intel/cnl: Set Heci1Disable depending on devicetree configFelix Singer
Currently HECI1 gets enabled by the option HeciEnabled, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement/disablement of the HECI1 device. All corresponding mainboards were checked if the devicetree matches the HeciEnabled setting, and adjusted where necessary. Change-Id: I03dd3577fbe3f68b0abc2d196d016a4d26d88ce5 Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-07mb/elmex/pcm205401: Add comment about the codeAngel Pons
It's not missing, it's just not where one expects it to be. Change-Id: I377b68cbdc9266048074dc326490750777a6fbf5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43291 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/asrock/b85m_pro4: Support LPC TPMAngel Pons
This mainboard has a 18-pin LPC header, where one can plug in a TPM. Untested, as I don't have a TPM. Change-Id: I14a159c373987d8b12fde18f327a9eb387c01de8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-08-07mb/intel/kblrvp: Factor out `IoBufferOwnership`Angel Pons
RVP11 and RVP3 set it to zero, the other two omit the setting. Tested with BUILD_TIMELESS=1, all four variants do not change. Change-Id: I6b393f0f2269f62b415456c17ba5962f46a1c5d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43909 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/intel/kblrvp: Factor out `HeciEnabled`Angel Pons
RVP8 does not set it, and the other variants set it to zero. So, factor it out. Tested with BUILD_TIMELESS=1, all four variants do not change. Change-Id: I67c958af2dc955d07b895dc93fbe2232dbd48d34 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43908 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/google/volteer: support variant defined spd pathsNick Vaccaro
Allow variants to override the SPD_SOURCE_PATH to allow supporting different types of DDR. BUG=b:163065661 TEST="emerge-volteer coreboot" and verify all variants build. Change-Id: Id52e651848548a783d6d9f57e88f6099425b063e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-08-07Revert "mb/google/volteer/var/halvor: Update dq/dqs mappings"Paul Fagerburg
This reverts commit 3d813cbede650a89a519d5896652328e4ecf88c6. Reason for revert: the CL made the build unstable. Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: I9d067eb13196ff7d537d557d8ff864b1572a3b04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43076 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/google/dedede/var/magolor: Select 16 MB SPI ROMRen Kuo
Decrease the SPI ROM size from 32 MB to 16 MB BUG=b:58540772 BRANCH=None TEST= build firmware and check the magolor bin size Change-Id: Ie7ddf698fde1dbf663859d5654946bc08abe737c Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-08-06mb/google/volteer/var/halvor: Update dq/dqs mappingsAmanda Huang
Update dq/dqs mappings based on halvor schematics. BUG=b:162892573 BRANCH=none TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Change-Id: I98f79283aa18f6fd41114fb6b60cac1cbed69de7 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43988 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Configure GPIO_89 as PAD_NCFurquan Shaikh
GPIO_89 was marked as EN_DEV_BEEP_L in pre-v3.6 schematics, but it was never really used on any of the zork variants. Starting with v3.6, GPIO_89 is left unused in schematics. This change configures GPIO_89 as PAD_NC in baseboard GPIO table. Since EN_DEV_BEEP_L still needs to be driven high to allow speakers to work, GPIO_89 is configured as PAD_GPO driven high on pre-v3.6 schematics. BUG=b:62108046 Change-Id: I026cd6cb598667ce6e115c3ec9357a6a56051d39 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44190 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Add touchscreen power controlFurquan Shaikh
This change adds support for touchscreen power control using: * GPIO_90 for trembyle based boards * GPIO_32 for dalboz based boards By default, baseboard tables configure these GPIOs as PAD_GPO driven low and override trees expose these pads as enable_gpio to be used by ACPI power resource. In order to support pre-v3.6 boards, override tables configure these pads as PAD_NC and drop the enable_gpio setting from device tree based on board version. BUG=b:161935640, b:162747210 Change-Id: Iba5e36b65b44ea11613b4d5fc8f13ce6433f83ab Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44193 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Switch USI_RESET to active low polarity for v3.6+Furquan Shaikh
v3.6 of reference schematics have switched the polarity of reset signal to touchscreen controller from active high to active low. This change updates the default configuration in baseboard gpio tables to set the reset GPIO to output low and override tables in variants to set the reset GPIO to output high. Additionally, devicetree by default exposes ACTIVE_LOW configuration for reset GPIO. In order to support pre-v3.6 boards, reset GPIO is updated to ACTIVE_HIGH based on board version. BUG=b:161937506 Change-Id: I092f274d8eb1920a1cd6d3eccbe8f26b0b28928a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-06mb/google/zork: Use dev_nested_path for dmic gpio updateJosie Nordrum
Create function update_dmic_gpio to update DMIC GPIO for ACP machine and use find_dev_nested_path function for consistency. BUG=None BRANCH=None TEST=None Change-Id: I96cf207f24c6117d98ff2bf7e6e5cd282489e805 Signed-off-by: Josie Nordrum <josienordrum@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44158 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Make SW changes for HP_INT_ODL in schematic v3.6Josie Nordrum
HP_INT_ODL is no longer connected to CODEC_GPI in schematic version 3.6. Split variant_audio_update into update_dmic_gpio and update_hp_int_odl. Changed GPIO_29 from PAD_NC to PAD_GPI in Trembyle. Changed GPIO_84 from PAD_NC to PAD_GPI for Dalboz. Changed HP_INT_ODL to appropriate pin in both boards devicetree.cb. BUG=b:161938476 BRANCH=None TEST=None Cq-Depend: chromium:2335424 Change-Id: I05ffb063ab99823d07be6eaa911efbde3cc4ff55 Signed-off-by: Josie Nordrum <josienordrum@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44157 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Add kconfigs to check schematic version 3.6Josie Nordrum
Added VARIANT_SUPPORTS_PRE_V3_6_SCHEMATICS and VARIANT_MIN_BOARD_ID_V3_6_SCHEMATICS. Added helper functions to check if variant uses v3.6 and if variant uses CODEC GPI. BUG=b:161938476 BRANCH=None TEST=None Change-Id: If86e1ea3c02db354c7b410f1bbc1daacb483cc51 Signed-off-by: Josie Nordrum <josienordrum@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44156 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/volteer: add support for ddr4 memoryNick Vaccaro
Add new ddr_memory_cfg structure to support both DDR4 and LPDDR4x memory types. Change existing variant code to use the new meminit_ddr() call instead of calling meminit_lpddr4x() directly. BUG=b:161772961 TEST='emerge-volteer coreboot chromeos-bootimage' and verify that volteer still boots. NOTE that this only tests the lpddr4 side of the implementation as I do not have a DDR4 board to test this on. Change-Id: Id4bca2bfa97530f0d04a0e8d90f01b8281d2aea6 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-08-06mainboard/google/puff: Remove second temp sensorAndrew McRae
Newer boards have removed the second temperature sensor and relocated the remaining sensor. BUG=b:162909373 TEST=Confirm on hardware. Change-Id: Ie41a57598b0c87a6632f4c55c0f60a94a89cae43 Signed-off-by: Andrew McRae <amcrae@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-06mb/google/kukui: Add ddr geometry to support 6GB, 8GB DDR bootupHuayang Duan
Set correct DDR geometry for all existing memory modules. BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I9b53ab2bf43e0dfb7448eb37a18faf686267eaed Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-06mb/google/kukui: Add a new config 'Fennel'xiatao5
A new board introduced to Kukui family. BUG=b:162478693 TEST=make # select Fennel BRANCH=kukui Signed-off-by: xiatao5 <xiatao5@huaqin.corp-partner.google.com> Change-Id: I1f742a36793f38c37fbd4e1b4cbddbd542e785ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/44061 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Zhaoyou Hong <hongzhaoyou@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05mb/intel/jasperlake_rvp: Replace static camera ACPI by driverSugnan Prabhu S
This change updates devicetree to enable SSDT generation for world facing and user facing cameras of jasperlake_rvp. Also removes DSDT changes related to the world facing camera. Change-Id: Ib439572bc1d15ef02c86c7bfa88af6b16eb06f97 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-05sb/intel/i82801{gx,ix,jx}/acpi/lpc.asl: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Also drop a now-unnecessary #undef directive from one mainboard. Change-Id: I613e77723d108641f16ec732358849c3bc0e49e0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43220 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05mb/google/volteer/var/voxel: Add Raydium touchscreen supportDavid Wu
Update gpio GPP_E7 and enable the Raydium TS support BUG=b:157402209,b:162632701,b:162636271 BRANCH=master TEST= 1. emerge-volteer coreboot chromeos-bootimage 2. boot up on voxel DUT and make sure the raydium TS can work. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I377aded4982ece71f4dabb58f307f68c713edcd2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
2020-08-05mb/google/vilboz: update telemetry settings for vilbozPeichao Wang
update telemetry value for SDLE test result. BUG=b:160698427 BRANCH=None TEST=emerge-zork coreboot Change-Id: Icce57f9be2732ff79f336daa6c447a30247366cf Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-05mb/google/zork/ezkinil: Fix ELAN touchscreen ACPI nodeLucas Chen
a. USI_REPORT_EN is no longer set to high in coreboot. Instead GPIO_144 is exposed as stop_gpio in ACPI to allow OS to control this pad as required. b. Add Delay after stop_gpio Low - 300ms BUG=b:162263398 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: I3d4dcb6e5cae5d9515abfd415315ec4114ca80b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44107 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05src: Use space after 'if', 'for'Elyes HAOUAS
Change-Id: I5d3a5ede47aefc7cc2ee330f8a0bcded16138764 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44173 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05src: Use space after switch, whileElyes HAOUAS
Change-Id: I150591aa3624895c4c321101a251547dd23d1db5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44172 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05baytrail mainboards: Clean up mainboard.cArthur Heymans
This cleans up some unneeded no-ops in the mainboard.c files of baytrail boards. Change-Id: I7662f6e860d672a99b211488122bec073cc78acf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Máté Kukri <kukri.mate@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-05mb/google/zork: update DRAM SPD table for dirinbozKevin Chiu
DRAM support list 0x00 HYNIX HMA851S6CJR6N-VK 0x01 HYNIX H5ANAG6NCMR-VKC 0x02 Samsung K4A8G165WC-BCTD 0x03 Samsung K4AAG165WB-MCTD 0x04 Samsung K4A8G165WC-BCWE 0x05 HYNIX H5AN8G6NDJR-XNC 0x06 HYNIX H5ANAG6NCMR-XNC 0x07 Micron MT40A512M16TB-062E:J 0x08 Micron MT40A1G16KD-062E:E 0x09 Samsung K4AAG165WA-BCTD 0x0A Samsung K4AAG165WA-BCWE BUG=b:161579679 BRANCH=master TEST=build Change-Id: Ib9fa5ae98568d659326d431a4006174a343fa299 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>