summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2013-12-12HDA: Enable Mini-HDA and fix up PCH-HDA initDuncan Laurie
The SystemAgent contains a mini-hd audio controller at PCI 0:3.0 which uses the same verb table init sequence as the southbridge. In order to avoid two copies of the verb table loading code I separated out the HDA verb table functions into a file that can be re-used and then added a minihd driver to the haswell northbridge. The minihd verb table is the same across devices so it can live within the minihd driver rather than needing to be specified in each separate mainboard. I also fixed up the driver for lynxpoint HDA by following the reference code. Without HDMI cable plugged in driver does not find any codec, and it does not seem to re-probe when HDMI is connected. We may be missing kernel patches for this. hda-intel 0000:00:03.0: no codecs found! With a basic kernel patch to add 0x0a0c device ID to HDA driver and with HDMI cable connected it is much happier: snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 Change-Id: Ifa587984be4fc2801704a0368b9cdf8379c2450e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4318 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12slippy/falco/peppy: make GPIO interrupts be edge triggeredDuncan Laurie
The drivers are designed to work with an edge triggered interrupt. Change-Id: I35a121ecfb6409bb9049f4d1e034185bb3bb7557 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61664 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4360 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12falco: drive WLAN_DISABLE_L low in S3 and S5Aaron Durbin
When the board is in S3 and S5 the WLAN_DISABLE_L signal can leak power into the WLAN power well since the GPIO controlling WLAN_DISABLE_L is in the suspend well. Therefore, drive WLAN_DISABLE_L low to avoid the power leak. Change-Id: I1a0df80dd47fdbd535aca7a9d49253794c480606 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61421 Reviewed-on: http://review.coreboot.org/4358 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-12exynos5420: Setup clocks for MMC bus controller.Hung-Te Lin
To configure source clocks on Exynos 5420 for MMC drivers. Some registers are different from the 5250. FSYS now has two parts and MMC uses FSYS2. The MMC block uses MPLL as the clock source. The "high-speed" MMC interface runs as 52MHz, so divider is set accordingly. Also, the MMC driver has changed from MSHCI (Mobile Storage Host Controller Interface) to DWMCI (DesignWare MMC Controller Interface). Change-Id: I9ba9cf43e2f2dcd9da747888c0c7676bd545177b Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60858 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4354 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12peppy: Add backward-compatible RAM_ID table.Shawn Nematbakhsh
Make use of google_chromeec_get_board_version to determine board version, and apply proper RAM_ID table to load correct SPD. Change-Id: I6a2d54759cf2ce98bf53df0db396c6e09368c714 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61192 Reviewed-by: Dave Parker <dparker@chromium.org> Reviewed-on: http://review.coreboot.org/4353 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12Peppy: Update Realtek ALC283 verb tableMartin Roth
Update peppy's verb tables for the Realtek ALC283 Audio Codec. ALC283 Configuration: Digital Mic - NID 12h: Disabled Speakers - NID 14h: Enabled Mono out - NID 17h: Disabled Mic 1 - NID 18h: Disabled Mic 2 - NID 19h: Headphone Jack Line1 - NID 1Ah: Internal Mic Line2 - NID 1Bh: Disabled PCBEEP - NID 1Dh: Enabled SPDIF - NID 1Eh: Disabled HP-OUT - NID 21h: Headphone Jack Mic 1 doesn't seem to really be available, but the documentation refers to NID 18h as MIC1, so it's being disabled as it's not being used. The onboard microphone has been moved to line 1. I had my peppy modified to attach the mic to line1 and mic1 now works with this patch. Mic2 looks harder to rework, so I think that will have to wait for the DVT boards. Change-Id: I7d6ce6b428806b6aed1d36e7e25302fa5ae14b21 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: https://gerrit.chromium.org/gerrit/58880 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4352 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-12falco: fix usb port settingsDuncan Laurie
USB2 Port A set to 6.4" and Back Panel USB2 Port B set to 5.2" and Back Panel USB2 Port C set to 12.3" and Internal Other devices all set to Internal. build and boot on falco and check settings. Based on the config settings all ports end up with tuning param 1 == 5 and param 2 == 2 U2ECR[0] = 0x00059501 U2ECR[1] = 0x00059501 U2ECR[2] = 0x00059501 U2ECR[3] = 0x00059501 U2ECR[4] = 0x00059501 U2ECR[5] = 0x00059501 U2ECR[6] = 0x00059501 U2ECR[7] = 0x00059e01 Change-Id: I6b9e6df2679036a501355e6b389a486a6f178f99 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61297 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4350 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-12falco: Remove thermal thresholds that use CTDPDuncan Laurie
This CPU does not support Configurable TDP and so far does not need to use Controllable TDP. Change-Id: I15599cd4e6890dd5c9d9f99bc4e95307a8dcc827 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60657 Reviewed-on: http://review.coreboot.org/4347 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12PIT: remove a comment that is incorrect.Ronald G. Minnich
The is_resume comment is wrong for this board. It only applies to the older 5250 cpu. In fact, the is_resume parameter is not needed for ddr init and will likely be removed soon. Change-Id: I4e3c92fcaaa75d3c9223d90acccf053f61406307 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/60103 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4342 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12snow: Fix the edid data structure definition so depthcharge works again.Gabe Black
Some new fields were added to the edid data structure, and the edid code was changed to put estimated values into those fields which were ultimately passed into depthcharge or other payloads. On snow we do things different and just declare an edid structure statically which didn't have those members. The rows and columns of the graphics console were 0, and that confused the framebuffer driver and made it loop forever. Change-Id: I6ca3bd948482b347a6a981e83b82b10dca995e5e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/61057 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4341 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12peppy: RAM_ID + storage changes for next build.Shawn Nematbakhsh
- Update RAM_ID table. - Add DEVSLP0 signal to NGFF SATA port. Note: After this change, old Micron 2GB boards will no longer boot. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: Id68a1d6ace2702cca9c37305726cd55a0bde5005 Reviewed-on: https://gerrit.chromium.org/gerrit/60167 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Dave Parker <dparker@chromium.org> Reviewed-on: http://review.coreboot.org/4340 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12peppy: Disable audio codec enable GPIO in S3 + S5.Shawn Nematbakhsh
To save power, disable audio codec in S3 + S5. Also, refactor Lynxpoint GPIO code slightly to allow usage in SMM binary. Change-Id: I55c4248c89a258b5e4cecf8579eb58f1c15430c0 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60950 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4339 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-09AMD boards: Fix includes for microcode updatesKyösti Mälkki
No ROMCC involved, no need to include .c files in romstage.c. Change-Id: I8a2aaf84276f2931d0a0557ba29e359fa06e2fba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4501 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-07peppy: Enable power limiting for thermal controlDuncan Laurie
Limit power to 12W at 73C and remove limit at 68C. To have the CPU consume maximum power it is necessary to stress both the CPU and the GPU. Bastion (chrome.supergiantgames.com) and/or webglsamples.googlecode.com can be useful for this. Testing this properly requires a script to report the running average power readings. The watch_power.sh script is attached to this issue in the partner tracker. 1) Run watch_power.sh continuously: localhost ~ # watch -n 0 bash -e /tmp/watch_power.sh 2) Start Bastion (or other stress apps). The power draw should be close to 15W if under enough load. 3) Watch until temperature climbs above 73C and is caught by the thermal zone 10 second poll, this can be sped up by blocking or removing the fan. 4) The ACPI thermal zone states should change to reflect that active[2] is now enabled and power consumption should drop to 12W. 5) Stop the stress apps and wait until the CPU cools off again, enable the fan again if it was removed. 6) The ACPI thermal zone state should switch back to active[3]. Change-Id: Ie6714a8543d4f06edf8513086fc9c968273bdb23 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60545 Reviewed-on: http://review.coreboot.org/4335 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-07Correct file permissions.Idwer Vollering
Some files have incorrect/odd permissions, correct them: remove unnecessary +x flags. Change-Id: I784e6e599dfee88239f85bb58323aae9e40fb21c Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4490 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-12-06butterfly: Fix build without ChromeOSKyösti Mälkki
Use a file in CBFS for keyboard layout and ethernet MAC instead of scanning FMAP. Change-Id: I7658c7c4e389deb20d7d8f57cce8b568efdc575d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4307 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-06qemu: fix GENERATE_ACPI_TABLES=n in fw_cfg.cGerd Hoffmann
Change-Id: Ib8dc069c9e503747c349e96a466feb42279afd08 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/4305 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-05google/link: use the new edid functions when in FUI modeRonald G. Minnich
The new edid functions support converting the edid to an lb_framebuffer. Use them. Also, since panels seem to set bits per color instead of bits per pixel, just force the right value in the edid struct. Add helpful comment because people don't always believe we need to set the pallette. While we're at it, fix a problem that caused it to not compile. Change-Id: I645edc4e442d9b96303d9e17f175458dc7ef28b6 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/57619 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4327 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-05peppy: Disable forced dev mode.Shawn Nematbakhsh
Don't force dev mode. Allow users to enter / exit dev mode as normal. Change-Id: I168eb04a8ac102a8c4a1ca8936f78f62b001e0eb Reviewed-on: https://gerrit.chromium.org/gerrit/59492 Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Reviewed-on: http://review.coreboot.org/4321 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-05Fix Makefile to include all copies of the SPD sourcesDuncan Laurie
On some systems there may be 2GB SKU that is the same as the 4GB SKU but just one channel of memory. In that case we need to ensure that both copies of the same SPD source end up populated by ensuring that repeated entries are included by using $+ instead of $^. Alternatively we could do the check inside romstage, but it is already set to behave this way if the SPD gets populated correctly. I changed spd_index to 3 in falco romstage to force it to pretend it was a 2GB config of the same memory, then booted to ensure it was indeed limited to 2GB. memcfg channel[0] config (00780008): ECC inactive enhanced interleave mode on rank interleave on DIMMA 2048 MB width x16 single rank, selected DIMMB 0 MB width x16 single rank memcfg channel[1] config (00600000): ECC inactive enhanced interleave mode on rank interleave on DIMMA 0 MB width x8 single rank, selected DIMMB 0 MB width x8 single rank Change-Id: Ibfe5051ccda2fe69e8caff3f3c264116e3411c65 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59483 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Jay Kim <yongjaek@chromium.org> Reviewed-on: http://review.coreboot.org/4319 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-05AMD Kabini: fix issue 'S3 fails to suspend after wake up from USB keyboard'Zheng Bao
Propagated from http://review.coreboot.org/3347 http://review.coreboot.org/3374 The cause of this issue is: USB devices use bit 11(0x0b) of GP0_STS represents S3 wake up event, but this bit is not clear after wake up. So OS thinks there is a wake up signal and wake up immediately. Both amd/olivehill and asrock/imb-a180 have been validated. Change-Id: I7c26cb07bcd2e62bb792809b67314e5155c6adf6 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/4261 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-05AMD Kabini: Add ACPI sleep/wakeup calls for southbridgeZheng Bao
The AML code of PTS and WAK for southbridge are in UINT8 AlibSsdtKB[], Proc/GNB/Modules/GnbInitKB/AlibSsdtKB.h. It was integrated into SSDT even it was called by nobody. The source ASL was provided by AGESA for reference, but it has been scrubbed when it was ported to Coreboot. Without the calls, Olive Hill can not wake up if it boots Windows. Both amd/olivehill and asrock/imb-a180 have been validated. Change-Id: Ia7bba29904dbd6f33fdb08bf88bb499005ef561b Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/4260 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-04lenovo/x60: Drop global oprom_is_loadedKyösti Mälkki
Variable use is specific to ChromeOS. Change-Id: I5b61a038e6b08e3b2408c4d990749d45fdf2148d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4306 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-12-04lumpy: Fix build without ChromeOSKyösti Mälkki
Change-Id: I1a59405499deceed7df01a03834be72830e6578f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4291 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-04intel/cougar_canyon2: Intel CRB FSP based mainboardMarc Jones
Cougar Canyon 2 is a Ivybridge/PantherPoint reference board. This implementation uses the Intel FSP (Vist the Intel FSP website for details on FSP architecture and support). The FSP does not support s3 at this time. S3 may be added when it is available in the FSP. All other features and IO ports are functional. Booted on Ubuntu 12.04 and 13.04, Fedora 18 with SeaBIOS payload. Memtest86, FWTS, and other tests pass. Board support page will be updated on acceptance. Change-Id: I26c0b82d7ac295498376ad4c3517a9d6660d1c01 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4018 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-03qemu-armv7: Drop additional console_init()Stefan Reinauer
It's done in bootblock_simple.c just after returning from the mainboard specific bootblock function. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I96cab5e406132a9f7dc30d48ff99f524773a1a14 Reviewed-on: https://gerrit.chromium.org/gerrit/58473 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4257 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-12-03slippy/falco/peppy: Fix Chrome OS GPIO export in ACPIDuncan Laurie
The OIPG package needs to have >1 member to make the chromeos_acpi kernel driver do the right automagic sysfs topology creation. Additionally an "unimplemented" GPIO should be reported as 0xFF because 0 is a valid GPIO number. verify crossystem on slippy $ sudo crossystem | grep -e recoverysw_cur -e wpsw_cur recoverysw_cur = (error) wpsw_cur = 1 Change-Id: I06dff09152bde30a3ffe58b1defe9d299155472c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57471 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4221 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-03haswell boards: Enable VIRTUAL_DEV_SWITCHDuncan Laurie
This config option was not enabled which was preventing the user from enabling developer mode from recovery mode. With this enabled we can disable the "dev mode by default" behavior and let people enable it by entering recovery mode. This will make the firmware behave like a typical chromeos device. Peppy is left in "default dev mode" until after bringup. 1) boot slippy in normal mode by default 2) enter recovery mode with servo button 3) Ctrl+D on USB keyboard to enter developer mode 4) boot slippy in developer mode Change-Id: I414c0d10dd0489e3c89798f75a2872a43297c8d8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57350 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4220 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-02Add option to disable ChromeOSKyösti Mälkki
Those building Chromebook firmware from coreboot git might be more interested in building without ChromeOS extras. Change-Id: I2f176d059fd45bf4eb02cc0f3f1dcc353095d0ce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3977 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02Introduce a config whether dock is inited in romstage or notVladimir Serbinenko
Instead of depending on exact mobo configure general characteristic whether dock is configured in romstage or ramstage. X60 and T60 have superio in dock so it needs to be inited to get serial, so it should be inited in romstage. On X201 there is nothing useful that early in boot but it's needed to init more to get dock working, in particular EC init needs to be done first. Change-Id: If5072e3dec883a94cd2d5643a92f7f6c3c9feee9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4294 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-02EC H8: remove dependence on IS_X201Vladimir Serbinenko
Instead define brightness up/down function and gfx device and use preprocessor magic to glue it together. Change-Id: I03074ae07b33c1546d229efc3e80606ddbee6300 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4282 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-12-02global: Fix usage of get_option() to make use of CB_CMOS_ codesAlexandru Gagniuc
Do not directly check the return value of get_option, but instead compare the returned value against a CB_CMOS_ error code, or against CB_SUCCESS. Change-Id: I2fa7761d13ebb5e9b4606076991a43f18ae370ad Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4266 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-02haswell: Update pei_data to match ref codeDuncan Laurie
- Add a new USB location field - Add a new "ddr_refresh_2x" field, enabled on Falco only - Fix copy+paste bug in baskingridge Checked that tREFI is halved during memory setup in the memory training log: tREFImin = 6240 << DEFAULT C(0).tREFI = 0xc30 << MODIFIED (=3120) C(0).tREFI = 0xc30 << MODIFIED (=3120) Also ensure that the SD card is detected properly again. Change-Id: Ie3a82c08df06ada9af56282b5255caefa56487f2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57349 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4219 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02falco: Update panel power sequence timingsDuncan Laurie
These are based on the datasheet and I included the timing values I used from the docs. Change-Id: Ib75b2c5e50ac09d1e4cf9dd22229bb0f0a8965a4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58540 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4234 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02peppy: Port updates from slippy/falco boardsDuncan Laurie
- Add HDA verb table - Add on-board device table - Add panel power sequencing values Change-Id: I1b3450c2740ec1d930f157a9b23550e1efc8668f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58197 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4233 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02lenovo/x60: Add "IBM ThinkPad Embedded Controller" SMBIOS OEM StringPeter Stuge
The Linux thinkpad_acpi.c driver looks for this string while reading information about the system it is running on. This commit does not make the module load but it is one of several things that the module looks for on a ThinkPad. Change-Id: Ia48bbd85ba4d528063695345b0f968d264573341 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3779 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-02peppy: Add 2GB DRAM configuration.Shawn Nematbakhsh
Currently, all Peppy boards w/ '000' SPD GPIOs have 2GB DRAM. Disable the second DRAM channel based upon the GPIOs. Need to change / confirm this for upcoming builds. Change-Id: I7085ddecb80626cc0bed99ba7b174c6b80350696 Reviewed-on: https://gerrit.chromium.org/gerrit/58620 Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4238 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-02peppy: Re-enable EC software syncShawn Nematbakhsh
The EC was disabling flash commands and sysjump was not working properly. With those two fixed software sync works properly. (Taken from I63ca00d6c94854f2b395eb736ce20792da5f8de2). Change-Id: I9c7d1d1f1aaf7de33d0cec5f6daf648576ba8900 Reviewed-on: https://gerrit.chromium.org/gerrit/57289 Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4212 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-02peppy: Update GPIO table + USB port map.Shawn Nematbakhsh
- Update GPIO table to match board. - Update USB port map. - Remove iSSD power sequencing code. Change-Id: Iaa8e5921ed9db6bcfd18b5a888c7f80b2c93a710 Reviewed-on: https://gerrit.chromium.org/gerrit/56869 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4211 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02Add description to MAINBOARD_VENDOR string so it can be overriddenDuncan Laurie
A quirk of the Kconfig used in coreboot is that config options cannot be overriden by local config changes unless they have a description string. 1) Add CONFIG_MAINBOARD_VENDOR="Custom" to local config 2) Build and flash coreboot 3) cat /sys/class/dmi/id/sys_vendor and look for "Custom" Change-Id: I1b5f2124cd4a22c056c025143ae5bcaafa6b03f0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59088 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4248 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02peppy: Add an inverted input GPIO typeShawn Nematbakhsh
The wake device input pins are active low and the GPIOs need to be set as inverted when they are marked as an input so they are not spuriously logged. Also sync pin states from Falco initial commit. Reference change: I15d38dcc9b2fb4b2b0eb27da358fa3c343e22323 Change-Id: I66e136d389d53a367436d816fa84dacdc8e86bad Reviewed-on: https://gerrit.chromium.org/gerrit/58334 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@google.com> Reviewed-on: http://review.coreboot.org/4247 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02falco/slippy: Fix DMIC nid verb.Dylan Reid
Set nid 0x12 instead of nid 0x05. The DMIC is on NIC 0x12. Change-Id: Ifc883b65a50aeec6a6d3ad02fe8418f124e6241d Signed-off-by: Dylan Reid <dgreid@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58711 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Commit-Queue: Duncan Laurie <dlaurie@chromium.org> Tested-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Jay Kim <yongjaek@chromium.org> Tested-by: Jay Kim <yongjaek@chromium.org> Reviewed-on: http://review.coreboot.org/4246 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-01slippy/falco/peppy: Fix SPD GPIO initialization.Aaron Durbin
SPD GPIOs were being read prior to initialization in romstage_common. To fix, pass the copy_spd function to romstage_common, to be called at the appropriate time (after PCH init, before DRAM init). Change-Id: I2554813e56a58c8c81456f1a53cc8ce9c2030a73 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58608 Reviewed-on: http://review.coreboot.org/4237 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-01Butterfly: Force DDR refresh rate to 2x.Shawn Nematbakhsh
Due to OEM request, always set DDR refresh rate at 2x. Change-Id: I81a4f57aca6388551dca6effbd9a4ac1a97e4f5a Reviewed-on: https://gerrit.chromium.org/gerrit/50477 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4214 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-01H8: Move EC GPE declaration to mainboardVladimir Serbinenko
Change-Id: Iefc481f09268dd15bbc3cbfa8bdd110d44383f6a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4281 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-26lynxpoint: Add an inverted input GPIO typeDuncan Laurie
The wake device input pins are active low and the GPIOs need to be set as inverted when they are marked as an input so they are not spuriously logged. suspend/resume on slippy with trackpad wake: 8 | 2013-05-29 07:43:14 | ACPI Enter | S3 9 | 2013-05-29 07:43:18 | ACPI Wake | S3 10 | 2013-05-29 07:43:18 | Wake Source | GPIO | 12 and with power button wake: 11 | 2013-05-29 07:43:35 | ACPI Enter | S3 12 | 2013-05-29 07:43:40 | EC Event | Power Button 13 | 2013-05-29 07:43:40 | ACPI Wake | S3 14 | 2013-05-29 07:43:40 | Wake Source | Power Button | 0 Change-Id: I15d38dcc9b2fb4b2b0eb27da358fa3c343e22323 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56940 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4209 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-26google/parrot/smihandler.c: Use `battery_critical_logged` only with `ELOG_GSMI`Paul Menzel
Make the declaration and use of it conditional on the ELOG_GSMI Kconfig variable. Change-Id: I2ef291d2f3e7d35545014e03ba8e0045da6050e5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3987 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-26slippy/falco: Re-enable EC software syncDuncan Laurie
The EC was disabling flash commands and sysjump was not working properly. With those two fixed software sync works properly. Google Chrome EC MKBP driver ready, id 'slippy_no_version' Clearing the recovery request. EC hash:7fea29992ef72e3e64d8ffe522aa1dfa68dcb44a2da96a4c19530ea1a0bd22c4 EC-RW hash address, size are 0xffa1cfe8, 32. Hash = 727e79934d9394184da496cebc27f7275b9d2d91079bf125d8f977a1f8aa4cde Expected hash:727e79934d9394184da496cebc27f7275b9d2d91079bf125d8f977a1f8aa4cde EC-RW firmware address, size are 0xffad000c, 57180. VbEcSoftwareSync() - expected len = 57180 Computed hash of expected image:727e79934d9394184da496cebc27f7275b9d2d91079bf125d8f977a1f8aa4cde VbEcSoftwareSync() updating EC-RW... VbEcSoftwareSync() jumping to EC-RW VbEcSoftwareSync() in RW; done Change-Id: I63ca00d6c94854f2b395eb736ce20792da5f8de2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56821 Reviewed-on: http://review.coreboot.org/4208 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-11-26falco: update verbs for ALC283Duncan Laurie
Set verbs to reflect the layout used for ALC283 in Falco, which ends up being the same as Slippy. Change-Id: I3dce4effefaa91ee5bdcbe2a8a3750ebc41376ad Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58196 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4232 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25slippy: update verbs for ALC283Dylan Reid
Set verbs to reflect the layout used for the ALC283 in slippy. install on slippy and check that headphone switch works as does external mic. Change-Id: I2d6bcda9cf8bbf49cbb6d2dbbe7f1a5adf315d8a Signed-off-by: Dylan Reid <dgreid@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57560 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4224 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25peppy: Add Elipda DIMM SPDShawn Nematbakhsh
Peppy RAM ID table is as follows: 000 41K256M16HA 001 H5TC4G63AFR 010 EDJ4216EFBG Elpida SPD taken from Ib1e430cd390b4dbc013fc0802f1a59c1a0412577 by dlaurie. Change-Id: Iac156a2d25435514f28e2e73bef617d0fe2d90a1 Reviewed-on: https://gerrit.chromium.org/gerrit/56687 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4201 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25peppy: Initial mainboard commitShawn Nematbakhsh
Taken directly from slippy with only constant + string changes. (Peppy port of I4172460d3b075bfd5bb22013a6225cf0e8f95b9c by dlaurie) The following changes are required in a subsequent commit: - Add Elpida SPD data. - Update GPIO map. - Remove iSSD power sequencing. - Update USB port map. Change-Id: I01dfb841f0e9186cf8a0a23f72e7be986a83be42 Reviewed-on: https://gerrit.chromium.org/gerrit/56513 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4200 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25falco: Update DIMM SPD tableDuncan Laurie
RAM_ID indices have been changed and settled on a 2GB config that will be the same DRAM chips but only used in one channel. Change-Id: I444e655883ae045622ab3dfb964da4d7f86e1c0d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56810 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4198 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25falco: Add panel power sequence timingsDuncan Laurie
These are placeholder values until we can configure for the exact panel. Change-Id: If40367c0e5f80d46d085c89b0edae60f1ccacdaf Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56808 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4197 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25falco: Add on-board devices and configure GPIO irq/wakeDuncan Laurie
Add the onboard I2C devices for Falco trackpad/lightsensor and generate SMBIOS Type41 tables for them. Add ACPI device for the trackpad to expose the interrupt map to the OS so it can be used. Configure interrupt GPIOs as PIRQ type and wake GPIOs as just standard input type. The wake GPIO is reconfigured as ACPI SCI in the specific device _DSW method. This prevents the wake GPIO from generating a flood of SCI at runtime. LTE_WAKE_L_Q and WLAN_WAKE_L_Q are left as ACPI SCI as these are not repurposed interrupt pins so they are not generated at runtime. SIM_DET and ALS_INT_L are set as input since we don't have an interrupt handler for them. Change-Id: Ibe9687b2f7f41ead18353c3f650219fe6e94ae2f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56632 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4191 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25slippy: Add on-board devices and configure GPIO irq/wakeDuncan Laurie
Add the onboard I2C devices for Slippy trackpad/lightsensor and generate SMBIOS Type41 tables for them. Add ACPI device for the trackpad to expose the interrupt map to the OS so it can be used. Configure interrupt GPIOs as PIRQ type and wake GPIOs as just standard input type. The wake GPIO is reconfigured as ACPI SCI in the specific device _DSW method. This prevents the wake GPIO from generating a flood of SCI at runtime. LTE_WAKE_L_Q and WLAN_WAKE_L_Q are left as ACPI SCI as these are not repurposed interrupt pins so they are not generated at runtime. SIM_DET and ALS_INT_L are set as input since we don't have an interrupt handler for them. tested on slippy with trackpad with additional kernel changes to chromeos_laptop.c to initialize devices. 1) Ensure trackpad interrupt is functional and that there is not a flood of ACPI SCI when trackpad does interrupt: 9: 1 0 0 0 IO-APIC-fasteoi acpi 37: 421 0 0 0 IO-APIC-fasteoi cyapa 2) Ensure that devices are exposed as wake capable: Device S-state Status Sysfs node TPAD S3 *enabled pnp:00:00 TSCR S3 *disabled pnp:00:01 3) Ensure that trackpad can wake from S3 by default, but that it does not cause an immediate wake when entering suspend. 4) Ensure that trackpad can be disabled as a wake source with echo TPAD > /proc/acpi/wakeup Change-Id: Id562d20b54eeefec56040b8f70ef238911312628 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56622 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4190 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-25falco: Add Elpida DIMM SPDDuncan Laurie
This was provided by the vendor but I added the part number at byte 128-143 so it can be identified when extracted by mosys. Change-Id: Ib1e430cd390b4dbc013fc0802f1a59c1a0412577 Reviewed-on: https://gerrit.chromium.org/gerrit/56634 Tested-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4192 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25baskingridge: drop incorrect USB handling codeStefan Reinauer
These GPIO accesses were copied by accident and don't make sense for the baskingridge board. Change-Id: I03bfc2cf97b6056a746a6c1a27308823ecaa9637 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4204 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25wtm2: add ssdt2 tableAaron Durbin
The LynxPoint southbridge ACPI code needs the SSDT2 table to function properly. Otherwise the ACPI evaluator in the kernel spews errors. Change-Id: I73918545a07e43f4a281ff34d8537340d601b102 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56601 Reviewed-on: http://review.coreboot.org/4188 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25smbios: Add generic type41 write functionDuncan Laurie
Mainboards were defining their own SMBIOS type41 write function. Instead pull this into the generic SMBIOS code and change the existing mainboards to make use of it. Change-Id: I3c8a95ca51fe2a3118dc8d1154011ccfed5fbcbc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56619 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4187 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25haswell: update pei_data data structureAaron Durbin
Update and use the new pei_data data structure. Now that the reference code is fixed it's possible to properly disable/enable the USB2 and USB3 ports correctly. Change-Id: I075c646e7574be354420b6e59507e8917a97d0f0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56594 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4185 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25falco: Initial mainboard commitDuncan Laurie
- Only the first two DIMM SPDs are specified so far - GPIO map is updated - iSSD power sequencing removed - USB port map updated Change-Id: I4172460d3b075bfd5bb22013a6225cf0e8f95b9c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56329 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4184 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25slippy: Enable EC SMIDuncan Laurie
Enable GPIO SMI for GPIO34 and set it as inverted so it is only generated when it is raised by the EC. 1) ec console command: lidopen 2) wait until booted to developer screen 3) ec console command: lidclose 4) ensure system turns off Change-Id: I7d50f171f3f4539c7c264103d1ffc7c5d0f1c7ba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56052 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4177 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-25lynxpoint: Change SerialIO device enable reporting to ACPIDuncan Laurie
In order to report whether coreboot enabled a SerialIO device in ACPI mode we had been relying on reading NVS in the _STA method for the SerialIO device. The ACPI _STA method has restrictions on what it can access and is unable to access OperationRegions outside its scope which means it should not be trying to read NVS. This change adds a new SSDT to the ACPI tables and fills it with constants that indicate whether or not a device is enabled in ACPI mode. The ACPI code is changed to read these variables from the SSDT and use that instead of trying to query a variable in NVS. Attempt to use lpt-clk driver to probe the device clocks for SerialIO devices and see that the kernel does not complain about accessing the GNVS region. Change-Id: I8538bee4390daed4ecca679496ab0cb313f174ce Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/51369 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4170 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25slippy: Minor vboot related fixesDuncan Laurie
- Disable EC software sync for now - Report correct EC active firmware mode - Force enable developer mode by default - Set up PCH generic decode regions in romstage - Pass the oprom_is_loaded flag into vboot handoff data Change-Id: Ib7ab35e6897c19455cbeecba88160ae830ea7984 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/51155 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4169 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25Fix int15 return value for mainboard oprom handlersDuncan Laurie
These boards were returning 0 to indicate success when the realmode handler expects it to return 1 to indicate that it handled the interrupt. Change-Id: I2baeaf8c2774fa7668a8b2f2d9ad698302eefb21 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50881 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4168 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25wtm2: Set SerialIO I2C ports to 3.3VDuncan Laurie
These are both pulled up to 3.3V in the schematic. Change-Id: I12e055a39ff6100300c3d285899b8d6239e3773d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50356 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4164 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25lynxpoint: Move ME lock down to ramstageDuncan Laurie
Now that we have RW ramstage we don't need to have the management engine lock down step done in a final SMM. ME: mkhi_end_of_post ME: END OF POST message successful (0) PCI: 00:16.0: Disabling device Change-Id: I9db4e72e38be58cc875c1622a966d8fcacc83280 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49757 Reviewed-on: http://review.coreboot.org/4153 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25lynxpoint: export mem console pointer in ACPIAaron Durbin
Instead of having an OS re-parse cbmem book-keeping records for the cbmem allocator just to get the console buffer export the pointer to the memory console directly in a field named 'CBMC'. This field lives in the GNVS table. Change-Id: Ief0c4da7b18df66feb9c816c9f4abdf5a72bd3a4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49764 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4149 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25Unify and clean up remaining INT15 handlersStefan Reinauer
Some handlers still had 2 variants, others were incorrectly guarded by CONFIG_ variables. This patch straightens them out. This does not touch the siemens/sitemp_g1p1 which provides an interestingly complex solution for the int15 handler. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I5d74fdf7c2ab1faa96ebc2b5ca5c69398449b069 Reviewed-on: https://gerrit.chromium.org/gerrit/48979 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4140 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25Fix VGA option rom INT15 handlerStefan Reinauer
The format of this function changed but was not updated in all mainboards. This fixes all Sandybridge/Ivybridge boards. The int15 handler no longer takes a regs structure as an argument and instead uses global variables. The yabel interface is now similar enough that we can drop the duplicate handler. Change-Id: Icdaae4d6d50884f6d7bce7a167d48cb1d4807010 Reviewed-on: https://gerrit.chromium.org/gerrit/48969 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4135 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-25bochs: add support for native graphicsRonald G. Minnich
Per our discussions with Gerd, qemu will now always do native graphics on coreboot. The VGA BIOS capability is not needed and will no longer be supported. Attempts to build without native graphics will result in an error. This code builds for both x86 emulation targets. I'm hitting an issue testing that is unrelated to coreboot; if someone can test, that would be helpful. Be sure to start qemu with -vga std. We also add a test for the PCI BAR being zero and return silently if it is. Change-Id: I66188f61e1bac7ad93c989cc10f3e0b55140e148 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: http://review.coreboot.org/4258 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-25google/butterfly: Declare mrc_scrambler_seed_chk in cmos.layoutAlexandru Gagniuc
SandyBridge raminit uses this CMOS option. If it is not declared, the build fails when USE_OPTION_TABLE is selected. Change-Id: I1ba1f994d4ea3824dc66e8f35d0b5b24b88d4dd6 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4269 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24haswell: Update ChromeOS ACPI GPIO packageDuncan Laurie
The chromeos_acpi driver sysfs naming is not what crossystem expects if there is just one entry in the package because it does not add a ".#" suffix in that case. Specify all the expected GPIOs on wtm2 as undefined, which should be 0xFF and not 0x00 becuase 0 is a valid GPIO. Change-Id: I9b17e9bab94219695e65b17914c84acf02a0983b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50337 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4162 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24haswell: enable monotonic timerAaron Durbin
For all the current haswell boards enable the monotonic timer. The ULT boards use the 24MHz MSR while the non-ULT boards use the local apic. Change-Id: I8b19f526a5a49e8467f296c566a2c4263bc5a863 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49763 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4148 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24haswell: configure c-statesAaron Durbin
The c-states are configured according to the BWG, however the package c-states are disabled as they currently cause platform instability. The exposed ACPI c-state to processor c-state mapping are as follows for ULT boards: ACPI(C1) = MWAIT(C1E) ACPI(C2) = MWAIT(C7S long latency) ACPI(C3) = MWAIT(C10) The non-ULT boards have an expoed c-state mapping: ACPI(C1) = MWAIT(C1E) ACPI(C2) = MWAIT(C3) ACPI(C3) = MWAIT(C7S) Included in this patch is removing the updating of current limit registers as some of the MSRs are different and the proper values are currently unknown. Lastly, some of the MSRs were renamed to match the BWG. Booted 3.8 kernel and used powertop to note package, core, and acpi c-state residency. Change-Id: Ia428d4a4979ba3cba44eb9faa96f74b7d3f22dfe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48291 Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4133 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24lynxpoint: Rework LP GPIO handlingDuncan Laurie
This adds some macros for the common GPIO defines and drops the gpio number definition from each entry. The end result is much easier to read. The wtm2 mainboard gpio list is modified to use this. Also fix a bug in the LP version of get_gpio() that was always returning zero due to a miscompare. Change-Id: I143e5aee412af1eda84e35f8026f31cf13df508e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48946 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4138 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24smi: Update mainboard_smi_gpi() to have 32bit argumentDuncan Laurie
With the LynxPoint chipset there are more than 16 possible GPIOs that can trigger an SMI so we need a mainboard handler that can support this. There are only a handful of users of this function so just change them all to use the new prototype. Change-Id: I3d96da0397d6584f713fcf6003054b25c1c92939 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49530 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4145 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add panel power sequence timingsDuncan Laurie
These are placeholder values until we can configure for the exact panel. Change-Id: Ibe88cc3588947366eb1728e5b3e1ab8c8be6dfe8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56807 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4196 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Clean up for easier portingDuncan Laurie
Minor tweaks to variable names in the slippy mainboard that make it easier to base a new board from without as much renaming. Also properly set up the thermal variables for the thermal zone that is defined in ACPI instead of using the generic setup from WTM2. Change-Id: I752c1a50bfdc06b6ddad95bd1331c6870b9f9df2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56328 Reviewed-on: http://review.coreboot.org/4183 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Run EC init as part of mainboard init stepDuncan Laurie
This will log and clear EC events so they do not take effect when the SMI handler is enabled. Change-Id: I5ef563f7cedc8977410cc3f69e2655fc4e14c9eb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56055 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4178 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Update interrupt routingDuncan Laurie
The SerialIO devices have specific requirements for PCI interrupt mode to use PIRQ{E,F,G,H} that are not being met. D21:F0 uses PIRQE, which must not be shared with other PCH D21:F1-F6 share PIRQF, which must not be shared with other PCH D23:F0 uses PIRQH, which must not be shared with other PCH - Fix D20IR -> D20IP typo - Remove D25/EHCI2 as it does not exist - Reorder other interrupts to clear PIRQE/PIRQF/PIRQH Check device interrupts in the kernel 0: IO-APIC-edge timer 1: IO-APIC-edge i8042 8: IO-APIC-edge rtc0 9: IO-APIC-fasteoi acpi 16: IO-APIC-fasteoi ath9k 18: IO-APIC-fasteoi i801_smbus 19: IO-APIC-fasteoi ehci_hcd:usb1 21: IO-APIC-fasteoi i2c-designware-pci--1, i2c-designware-pci--1 40: PCI-MSI-edge PCIe PME 41: PCI-MSI-edge i915 42: PCI-MSI-edge ahci 43: PCI-MSI-edge xhci_hcd 44: PCI-MSI-edge snd_hda_intel Change-Id: Id4c08d11d2860f270c6387138acdc7d3d83a85b5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56028 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4176 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: set PWM valuesAaron Durbin
The dev screen was not displaying properly. With the PWM values programmed the screen displays correctly. Change-Id: I82b56a92e4168022082a2e519026977ee2ae0c9e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/51472 Reviewed-on: http://review.coreboot.org/4172 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Put SerialIO devices in PCI modeDuncan Laurie
The device at function 0 also needs to be enabled or the kernel will ignore all other functions. 00:15.0 DMA controller: Intel Corporation Lynx Point-LP Low Power Sub-System DMA (rev 03) 00:15.1 Serial bus controller [0c80]: Intel Corporation Lynx Point-LP I2C Controller #0 (rev 03) 00:15.2 Serial bus controller [0c80]: Intel Corporation Lynx Point-LP I2C Controller #1 (rev 03) Change-Id: I0e1bc7bb719756496c46664d66dc1b1cf2f4d1ba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/51370 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4171 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add EC to the device treeDuncan Laurie
This lets the keyboard init get called properly. Change-Id: I11ffb459907188a58149d28a6ade0b7de7d15d08 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50853 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4167 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Update SPDDuncan Laurie
Change-Id: Iae0258ceb0424df0937d2cec7dd885060f5b4e48 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50082 Reviewed-on: http://review.coreboot.org/4157 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add SPD data for on-board memoryDuncan Laurie
Change-Id: I7a617fe06d23b906f718ed30f1378f7d220b2799 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49911 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4154 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Prepare LPC IO decode ranges for ECDuncan Laurie
- 0x200-0x208 for host command window - 0x800-0x8ff for host command arguments and parameters - 0x900-0x9ff for exported EC memory map Change-Id: I064b969843ef0d3c602793d1cb3d82715775c05e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49755 Reviewed-on: http://review.coreboot.org/4151 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add iSSD power sequencingDuncan Laurie
Without an LM10506-A the power sequencing for this part needs to be done manually using GPIOs. Change-Id: I842152e5f7c30c8dbe37df0c344935a659eb2887 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49648 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4150 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24slippy: Initial mainboard commitDuncan Laurie
Change-Id: I33876b90902d4a08d760eb482b08ba41be6e3695 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49531 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4147 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24amd/olivehill: Fix the double spaces in copyright headerZheng Bao
Change-Id: I1bdc52efc827c331c53b97d2b96edafc518d05bf Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/4259 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-11-24Lenovo X60: Native VGA init: Get rid of the memory corruptions.Peter Stuge
Without that fix the GTT points at 0x00000000. The patch was made by Peter Stuge, I just split it and added a commit message. Change-Id: Ia378b600ba2faf00d42635c6503b94ff0cb1bc8c Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/4002 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24lenovo/x60: native vga init: fix code style issues.Denis 'GNUtoo' Carikli
Change-Id: I054edffbb38b13559da10180fc2c6cd9929ba162 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3999 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24dmp/vortex86ex: Move DMP specific POST code defines into one fileAndrew Wu
Move into src/cpu/dmp/dmp_post_code.h Change-Id: If9f4d842f352eb41618e71f49a226d3cc4ad0b46 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3989 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24lenovo/x60: export reboot_bits nvram configuration.Denis 'GNUtoo' Carikli
This permits any software running after the ramstage to tell coreboot that the boot was successfull. Change-Id: I6b19160dcf1ea1948360db71d02e344a3bcb44ef Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3992 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-22AMD f15tn, f16kb: Remove CDIT table and DMI tableWANG Siyuan
On AMD Trinity and Kabini boards errors similar to the following are shown. ASSERTION FAILED: file 'src/mainboard/asrock/imb-a180/agesawrapper.c',line 431 DmiTable:100123f7, AcpiPstatein: 10010129,AcpiSrat:0,AcpiSlit:0, Mce:10010de9,Cmc:10010eab,Alib:1002111c, AcpiIvrs:0 in agesawrapper_amdinitlate agesawrapper_amdinitlate failed: 5 The reason is that on f16kb boards, the CDIT and DMI table are not created. On f15tn boards, only the DMI table is not created. Until the root cause is found, disable the table generation to remove the errors. Thanks to Wei Hu for debugging and reporting this issue on the list [1]. [1] http://www.coreboot.org/pipermail/coreboot/2013-November/076607.html CDIT table is not created Change-Id: I837e3c322bb5331a9b950a72397796a60642c3f3 Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/4092 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-11-19Asus F2A85-M: Fix S3 memory power cut-offRudolf Marek
The power to memory is lost during the the suspend, activate the 3VSBSW# which switches the power during S3 suspend sequence. As a result resuming from suspend to RAM works now, but now the GPP ports of the Hudson southbridge are gone after resume from S3. The devices 15.0 and 15.1 are disabled (decode as ffff) and therefore anything behind them too [1]. [1] http://www.coreboot.org/pipermail/coreboot/2013-November/076620.html fam15tn hudson PCIe GPP ports off after resume Change-Id: Id953313ee4400a03a2ad8ca09e39a5e0d5f92524 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/4041 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-11-18qemu: set smbios entries from fw_cfgGerd Hoffmann
Qemu makes the guest uuid (qemu -uuid $uuid) available to the guest via fw_cfg. Other smbios fields can be configured in qemu using the -smbios command line switch (check the qemu manpage for details). This patch adds coreboot support for this, so the values provided by qemu will actually show up in the smbios table. Change-Id: Ifd9ae0d02749af4e7070a65eadbd1a9585a8a8e6 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/4086 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-15qemu: load acpi tables from fw_cfg.Gerd Hoffmann
Starting with release 1.7 qemu provides acpi tables via fw_cfg. Main advantage is that new (virtual) hardware which needs acpi support JustWorks[tm] without having to patch & update the firmware (seabios, coreboot, ...) accordingly. So if we find acpi tables in fw_cfg try loading them, otherwise fallback to the builtin acpi tables. Change-Id: I792232829b870ff6ed8414a3007e0af17f6c4223 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/4040 Tested-by: build bot (Jenkins)
2013-11-15Lenovo T60/X60: cmos.layout: Replace tabulators with spaces for consistencyPaul Menzel
Change-Id: Iec0abae8a4b18ac737e9ebb3eac219182729be0f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/4057 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 05:52:44 +0000