| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I1c9af223d3598c4822905acce0cf9b1dca6ad1b6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1287066
Reviewed-on: https://review.coreboot.org/15981
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch adds IO and IRQ information for UART 3/4 to the devicetree.
Patch with Change-Id: Ief5d70c8b25a2fb6cd787c45a52410e20b0eaf2e is needed.
Payload SeaBIOS 1.9.1 stable, Lubuntu 16.04, Kernel 4.4.0
Change-Id: I1d8fa16950079a47775f48166486415bd5d24f42
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15621
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch adds two SPD files with different DDR3 clk settings.
The user can choose which setting to use.
Lower clk settings saves power under load.
SoC Model GX-411GA supports only up to DDR3-1066 clk mode.
Both SPD settings were tested with memtest for several hours.
Power saving is around half a watt under heavy memory load.
Payload SeaBIOS 1.9.1 stable, Lubuntu 16.04, Kernel 4.4.0
Change-Id: Ibb81e22e19297fdf64360bc3e213529e9d183586
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15907
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch binds PCIe lanes 2 and 3 to one PCIe device.
PCIe device 2.4 becomes x2.
Tested with the connected FPGA on PCIe 2.4.
FPGA doubles transfer rate from/to the AMD.
Payload SeaBIOS 1.9.1 stable, Lubuntu 16.04, Kernel 4.4.0
Change-Id: Icee567272312a7df4c3b5a6db5b420a054ec3230
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15905
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This probably never happens, but since we already test for the presence
of the device, it makes no sense to try to configure it after its
absense was determined.
Change-Id: I9877dcd15819fb7949fa08a0954b05780df66316
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1347362
Reviewed-on: https://review.coreboot.org/15982
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Update RO_SECTION to match the changes in depthcharge:
https://chromium-review.googlesource.com/#/c/364261
BUG=chrome-os-partner:55713
Change-Id: I7238856cf73a62345778ea87e191a11190b7fb38
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15966
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch enables DPTF support for Intel Amenia
platform, adds the ASL settings specific to Amenia
boards.
BUG=chrome-os-partner:53096
TEST=Verify that the thermal zones are enumerated
under /sys/class/thermal in Amenia board. Navigate to
/sys/class/thermal, and verify that a thermal
zone of type TCPU exists there.
Change-Id: I400e2312a20870058f3a386004fad748d3ee4460
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15094
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch enables DPTF support for Google Reef
platform, adds the ASL settings specific to Reef
boards.
BUG=chrome-os-partner:53096
TEST=Verify that the thermal zones are enumerated
under /sys/class/thermal in Reef boards. Navigate to
/sys/class/thermal, and verify that a thermal
zone of type TCPU exists there.
Change-Id: Ib43e4e9dd0d92fffc1b2c8459c552acd04ca0150
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15640
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
After the indentation is fixed in commit *mainboard: Format
irq_tables.c* [1], the comment is redundant. So remove it.
[1] Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a
Change-Id: Iebbcf10ee3cef1b4cf60ea34a6b3ad51e2208671
Reviewed-on: https://review.coreboot.org/15933
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Run the command below to format the files `irq_tables.c` of (mostly AMD)
mainboards correctly with GNU indent 2.2.10.
```
$ git grep -l 'if (sum != pirq->checksum) {' | xargs indent -l
```
Fix up the following two checkpatch.pl errors manually.
```
ERROR: that open brace { should be on the previous line
#1219: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:129:
+ uint8_t reg[8] =
+ { 0x41, 0x42, 0x43, 0x44, 0x60, 0x61, 0x62, 0x63 };
ERROR: that open brace { should be on the previous line
#1221: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:131:
+ uint8_t irq[8] =
+ { 0x0A, 0X0B, 0X0, 0X0a, 0X0B, 0X05, 0X0, 0X07 };
```
This is needed, so that follow-up commits, fixing checkpatch.pl errors
and warnings, won’t run into conflicts with the git commit hooks, when
for example, spaces instead of tabs are used for indentation.
Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/15932
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change EVT3 board id to 5.
BUG=chrome-os-partner:55320
TEST=None.
BRANCH=None
Change-Id: I020be47e1fdbf886c7c471d7fdcace1537875b6d
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 63bd6541055172765c31a9b1220a24d4e3604cdc
Original-Change-Id: I21a8764ff95892430944778f4898d2f1d4c97fd7
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/362391
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/15949
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Almost all of the places where we have the degree symbol '°', it's
encoded as 0xc2 0xb0 (utf-8 encoding). There are a few places where it
is encoded as just a high ascii byte: 0xb0. Editors that support the
high ascii 0xb0 seem to support the utf-8 0xc2 0xb0 encoding as well,
but the opposite does not seem to be true.
Change the high-ascii degree symbols to utf-8 encoding.
Change-Id: I3d06289b802f45e938dc72b4c437fca56235b62b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15978
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Keep this enabled by default as most x86 platforms could have PCI-e
slots equipped with one of these Intel WiFi adapters.
The Kconfig entries under google boards had no function previously,
the variable was never referenced.
Change-Id: I728ce3fd83d51d4e5e32b848a2079c5fcee29349
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15931
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add next generation of BAPs (https://www.unibap.com/) SOC module,
called ode_e21XX.
Hardware is similar to e20XX (AMD G-Series GX-411GA Kabini),
but it includes a new AMD G-Series GX-412HC (Steppe Eagle)
and an updated Microsemi FPGA.
Changes to Olivehillplus:
- Add SuperIO Fintek F81866D
- Soldered down DDR3 with ECC
- User can choose between different DDR3 clk settings
(lowest setting can save up to 1.2W)
- Soldered down Microsemi M2S060 FPGA on PCIe lanes 2-3
Tested with:
- Payload SeaBIOS 1.9.1
- Lubuntu 16.04, Kernel 4.4.0
- Windows 10 (UART functionality)
Known problems:
- S3 not working
- IOMMU not working
Change-Id: I41f6a3334ad2128695a3f7c0a6444f1678d2626e
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15918
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Initial copy of olivehillplus.
Change-Id: Ibe9b450c05bfad15a95852addb1465ac2d3cef61
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15917
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Use the ACPI generator for creating the Chrome OS gpio
package. Each mainboard has its own list of Chrome OS
gpios that are fed into a helper to generate the ACPI
external OIPG package. Additionally, the common
chromeos.asl is now conditionally included based on
CONFIG_CHROMEOS.
Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15909
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Due to GPE routing, raw GPIO cannot be used for indicating the wake
signal for touchpad. Instead we need to reference GPE pins.
BUG=chrome-os-partner:55670
Change-Id: Ie5d8473df4301c7beef0cae8fe84e71b2838261b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15947
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We need to enable DRAM ODT on kevin/gru board to improve the
DRAM signal. Note, if the DRAM ODT is enabled and set to 120ohms,
the sdram VREF need to adjust to 840mv.
This patch also makes following changes:
1. For compatiblity with the old board, add the
"sdram-lpddr3-hynix-4GB-666-no-odt.inc" and
"sdram-lpddr3-hynix-4GB-800-no-odt.inc" files
which do not enable sdram ODT.
2. Delete the 300MHz dram inc file. The 300MHz sdram config just
reduced 666MHz to 300MHz based on the 666MHz config file, and it is
not stable, so delete it.
3. Delete the 928MHz dram inc file, 928MHz sdram config still in
debuging, delete it for now.
BRANCH=none
BUG=chrome-os-partner:54871
TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass
Change-Id: If0248e1bc4cef2c298762080f1ca018653af0521
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 78d8a28e2d3489c99c9bba2c1c9aa76812e2e33f
Original-Change-Id: I35f0685782d6fb178a95780ec77c45f565dd2194
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/358763
Original-Commit-Ready: Dan Shi <dshi@chromium.org>
Original-Tested-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15813
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update the write protect GPIO reported in ACPI to GPIO_75.
Also update the controller ID to "INT3452:01" which will
point at the goldmont device and includes write protect GPIO.
BUG=chrome-os-partner:55604
BRANCH=none
TEST=verify crossystem output for wpsw_cur.
Change-Id: Ibe6a013aaab18bfa2436698298177218ca934fab
Signed-off-by: Susendra Selvaraj <susendra.selvaraj@intel.com>
Reviewed-on: https://coreboot.intel.com/7929
Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com>
Tested-by: Petrov, Andrey <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Define LPC decode ranges for EC communication.
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and boot kunimitsu to ensure no EC timeout error
Change-Id: Idefdd79e67e89a794195c6821fee16550d1eda53
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15898
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move mainboard post console init functionality (google_chrome_ec_init &
early_gpio programming) from verstage to bootblock.
Add chromeos-ec support in bootblock
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and boot kunimitsu till POST code 0x34
Change-Id: I1b912985a0234d103dcf025b1a88094e639d197d
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15786
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Currenty, boot reason is being added to elog only for some
ARM32/ARM64 platforms. Change this so that boot reason is logged by
default in elog for all devices which have CHROMEOS selected.
2. Add a new option to select ELOG_WATCHDOG_RESET for the devices that
want to add details about watchdog reset in elog. This requires a
special region WATCHDOG to be present in the memlayout.
3. Remove calls to elog add boot reason and watchdog reset from
mainboards.
BUG=chrome-os-partner:55639
Change-Id: I91ff5b158cfd2a0749e7fefc498d8659f7e6aa91
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15897
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This is required to enable elog support in ChromeOS by default.
BUG=chrome-os-partner:55639
Change-Id: I9c97143d794de4bf220ddf67c0ca2eac2f7a326d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15896
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:55639
Change-Id: Idbad4f8763be18002907a62be755b2fdf7e479ec
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15895
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:55639
Change-Id: Ie859ec3ff682e91a4d7d38d3c3cd6badf7385431
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15894
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and
developer mode check functions to vboot. Thus, get rid of the
BOOTMODE_STRAPS option which controlled these functions under src/lib.
BUG=chrome-os-partner:55639
Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15868
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use
of verified boot library without having to stick to CHROMEOS.
BUG=chrome-os-partner:55639
Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15867
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
The slippy board was a proof of concept device that has never
made it out in the wild. Moreover, I don't think any of these
boards exist any longer.
Change-Id: I24fb08d9be35b2367e7aa64520ce5778ab861535
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15902
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The bolt board was a proof of concept device that has never
made it out in the wild. Moreover, I don't think any of these
boards exist any longer.
Change-Id: I5ca055d448659a2b8e2eafcfc2114a6b8f8a56a4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15901
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
All mainboards (nyans) utilizing the cache_policy option
has it set to DCACHE_WRITETHROUGH. This option is for setting
the framebuffer's cache attribute. However, this option is
reliant on an architecture-specific enumeration. Just remove
the option and use DCACHE_WRITETHROUGH across the board. If
someone wants to reconfigure it at a later date one can
introduce a non-architecture specific option.
Change-Id: I6a0848231f5e28d36ec2d56b239bed67619fe5a7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15838
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
We set this driving control to prevent signal attenuation caused by
LVDS DRV termination.
When DA_LVDSTX_PWR_ON is not set, LVSH has no power and LVDS DRV
termination status is unknown(floating). This creates a chance that MIPI
output would be influenced. The DSI's LP signal will be half voltage
attenuation. There will be no display on panel.
When DA_LVDSTX_PWR_ON is set, LVSH and LVDS DRV termination are
effective and termination is fixed OFF. The DSI won't be influenced.
We only need to set this register once, so we set it here to prevent
repeat setting in the kernel when the system goes to recovery mode.
BUG=chrome-os-partner:55296
BRANCH=none
TEST=build pass elm and show ui
The original commit in the cros repo combined the chipset and mainboard
code changes. This has been split for the push to coreboot.org
Change-Id: I733bdd115950b71493856220414ac0dd75d28122
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 0d25a27f300acc4b65a894110d3ee0cc9676cd12
Original-Change-Id: Ie71f9cc41924787be8539c576392034320b57a49
Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/360850
Original-Commit-Ready: jitao shi <jitao.shi@mediatek.com>
Original-Tested-by: jitao shi <jitao.shi@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15808
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
_Static_assert() gets evaluated even when the code path it's in is
unreachable (e.g. inside an if (0) block). Unfortunately, Kconfigs that
depend on a disabled Kconfig are always 0, meaning that
CONFIG_CONSOLE_SERIAL_UART_ADDRESS on Gru cannot evaluate to UART2 when
CONFIG_CONSOLE_SERIAL (which it depends on) is disabled. Switch the
condition it is wrapped in to a preprocessor #if so that the
_Static_assert() is not evaluated when building without serial support.
BRANCH=None
BUG=None
TEST=Built and booted Kevin without serial
Change-Id: I391325fcc4b7d64b4866a7fce4444e2f28365b7d
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: f5e5cf0644154eca5b347ea381df3f6b28287524
Original-Change-Id: I33d51d4ef09b218c14173d39a12795f0cef6bb40
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/361581
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15810
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Fix the board ID handling.
Recovery switch and WP status GPIO has been reassigned in board rev3.
Configure related GPIOs based on Board ID.
BUG=chrome-os-partner:55320
TEST=Verified GPIO assignment for Rev.1 board.
BRANCH=None
Change-Id: Id8e1ba1c039f8b5b503f0da038e5cfc84b72678f
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: d295ab514e31d9ebd1b77e0af9b769e64cbf567e
Original-Change-Id: I6d3d5df2e9017f7845edc3cd0b2c19ad7c58a97c
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/361393
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/15809
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
1. Remove unused functions/structures.
2. Add checks for NULL return values.
3. Change prefixes to vb2 instead of vboot for functions used internally
within vboot2/
4. Get rid of vboot_handoff.h file and move the structure definition to
vboot_common.h
5. Rename all functions using handoff structure to have prefix
vboot_handoff_*. All the handoff functions can be run _only_ after cbmem
is online.
6. Organize vboot_common.h content according to different
functionalities.
BUG=chrome-os-partner:55431
Change-Id: I4c07d50327d88cddbdfbb0b6f82c264e2b8620eb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15799
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
All the mainboards share the same config options for CHROMEOS. Instead
of duplicating those in every mainboard, move the CHROMEOS config to SoC
and make it dependent on MAINBOARD_HAS_CHROMEOS.
BUG=chrome-os-partner:55431
Change-Id: Iafabb6373dfe16aaf0fe2cbc4e978952adeb403e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15822
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
All the mainboards share the same config options for CHROMEOS. Instead
of duplicating those in every mainboard, move the CHROMEOS config to SoC
and make it dependent on MAINBOARD_HAS_CHROMEOS.
BUG=chrome-os-partner:55431
Change-Id: I2d54ff6beac9fca7596a8f104e3c1447cada5c05
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15821
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:55431
Change-Id: I94fe54c12d7438a71f81a9053cc9785c0aa1e6cf
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15823
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Bitmap images have been moved to CBFS from GBB. This patch adjusts the flash
size accordingly for jecht.
BUG=chromium:622501,chromium:628494
BRANCH=none
TEST=emerge-jecht chromeos-bootimage
CQ-DEPEND=CL:361380
Change-Id: I941df04b4999d35bd652e4ee1664c032cb550b29
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: c859ce04d2df5f21c47a164cabbc9ef6dec61818
Original-Change-Id: I50a9ade2e90237b0a7c277bffd7b540132415f13
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/361370
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15806
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This device has a built-in keyboard that should be enabled by default
or it will not work in firmware. This was tested to ensure that TAB
(display info) and Ctrl+D (enter developer mode) are functional at the
Chrome OS recovery screen.
BUG=chrome-os-partner:55549
Change-Id: I60156f1fc001b88deac69e03e02e9d8277fbc38d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15782
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update the write protect GPIO reported in ACPI to GPIO_75.
Also update the controller ID to "INT3452:01" which will
point at the goldmont device and includes write protect GPIO.
BUG=none
BRANCH=none
TEST=verify crossystem output for wpsw_cur.
Change-Id: Id6b172e289976072836746c1814e0300544a06cb
Signed-off-by: sselvar2 <susendra.selvaraj@intel.com>
Reviewed-on: https://coreboot.intel.com/7771
Reviewed-by: Sparry, Icarus W <icarus.w.sparry@intel.com>
Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com>
Tested-by: Petrov, Andrey <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15496
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This changelist updates gpio config for speaker SDMODE pin.
It disables speaker by default.
Audio kernel is expected to enable this when audio rendering starts.
Change-Id: Id33ad29e637bf1fe6b02e8a4b0fd9e220e8983e7
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/15433
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The 'dram density' is a misnomer because the memory initialization
code treats that input parameter as a per rank density. Therefore,
update the variables to further clarify how it's actually being
used.
BUG=chrome-os-partner:55446
Change-Id: Ie4c944f35b531812205ac0bb1c70f39ac401495e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15773
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
The 16Gb devices use two ranks per channel within the DRAM module.
However, the density settings are really on a per rank basis so
indicate dual rank with a device density of 8Gb.
BUG=chrome-os-partner:55446
Change-Id: Ib5dba6f9ed248750d68b726996c71def9b75961e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15772
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The EVT board uses an active high power control signal while
the previous board used an active low signal. Update the tables
to reflect the differences.
BUG=chrome-os-partner:55470
Change-Id: I198c0e4e019fcffe2cf748d382351ac965a81077
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15763
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
I mistakenly assumed the order of the bits matched how one
would assign values as they wrote them msb .. lsb. However, the
gpio lib doesn't do that. Correct the order so that values are
read out correctly.
BUG=chrome-os-partner:54949t
Change-Id: I5304dfe2ba6f8eb073acab3377327167573ec2cc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15753
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This entry gets added in run_ramstage().
Change-Id: I18cda4ead3614c6d07c3269cbee53e6def6408c7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15755
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
EVT has a wake signal for track pad which is routed to GP_15.
BUG=chrome-os-partner:54960
Change-Id: I9a73a3dc74e3bbed63509a3c076ec17a6559da55
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15723
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ibab9039306730bfd3063b34cf085e854e4608902
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14970
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
Change-Id: I70330278bae54392e236d762716ba7c4d39a05a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14969
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add DA7219 support in acpi.
DA7219 has advanced accessory detection functionality.
Also add DA7219's AAD as a ACPI data node.
Change-Id: I979275cb2ab1e593ff1e5d360bea83b843e45021
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/15625
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The Chrome OS options that will be shipped on this platform were
being set in the chromium repo with an external config file. Set
the options in the mainboard Kconfig file so there's no discrepancy
as to what will be used.
Change-Id: I05f0d1245611c16f54273728519a08e6edff3429
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15733
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In order to save power in S3, we remove reset gpio setting in kernel.
We still need to initialize touchscreen ic.
Do it by pulling low reset gpio for 500us and then pulling high
in firmware.
BRANCH=none
BUG=chrome-os-partner:55170
TEST=build on elm.
Change-Id: Idbe0175a1fc1fa0b05e81706194c79d52c6101f6
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: f40cc9a22c2551c2c9455cb8b60f36353602bca6
Original-Change-Id: If2ac815c4fd5c5ae15443348a49eb31449b724b1
Original-Signed-off-by: YH Huang <yh.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/360312
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Johnny Chuang <johnny.chuang@emc.com.tw>
Reviewed-on: https://review.coreboot.org/15719
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Asserting this GPIO will send a signal to the EC to trigger a reset
for the AP and the CR50.
BRANCH=none
BUG=chrome-os-partner:55252
TEST=the device now reboots when it needs to switch between different
boot modes instead of hanging with "failed to reboot" message.
Change-Id: I8d168e313b6983c96c80f7ad6d70bb84c1ec1d9c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 83a4c8ff68ab24a103f2166e948eb23624ea97f7
Original-Change-Id: Idfd20977cf3682bd8933f89e8eec53005e55864e
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/360238
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15718
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
F2950 SBC, also known as TONK 1201/TONK 1202, was originally
produced as a Centerm F2950 using DB800 reference design. Common
configuration does include a 600 MHz GeodeLX CPU underclocked to
500 or 400 MHz, 128 or 512 MiB of RAM in the single SODIMM slot and
128 or 512 MB IDE DOM. The board does have three USB 2.0 ports
(none of them possessing debug capabilities), PS/2, VGA, Geode
audio in/out and the serial port.
EEPROM needs to be soldered out and flashed externally at the time
of this message because flashrom would neither be able to dump BIOS
correctly while running vendor BIOS nor write flash contents.
All peripherals were tested against Linux 3.16 and seem to work
flawlessly. At the moment of this commit coreboot does not pass
PCI_COMMAND_IO from the configuration space to SeaBIOS, thereby
preventing VGA OPROM from being executed. This would be fixed in
the SeaBIOS itself or in a subsequent commit. As a workaround,
user may put VGA OPROM to vgaroms/seavgabios.bin in CBFS.
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Change-Id: I93f13ecb53bd05abc0e07e0bd7ba40e646dcb4c4
Reviewed-on: https://review.coreboot.org/15565
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch adds support to wake up from S3 on lidopen.
mainboard.asl has the _PRW defined for the wakeup support
in S3.
BUG = chrome-os-partner:53992
TEST = Platform wakes up from S3 on lidopen.
Change-Id: I48b456baf5f7e1c2f28454fa66bb90ad761bb103
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15618
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since the Integrated Sensor Hub can be disabled through devicetree.cb
as a PCI device, there is no need for a separate register variable.
Remove handling the register and update mainboards' devicetrees. Also
keep ISH disabled on both Reef and Amenia.
Change-Id: I90dbf57b353ae1b80295ecf39877b10ed21de146
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15710
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch adds support to wake up from S3 on lidopen.
mainboard.asl has the _PRW defined for the wakeup support
in S3.
BUG = chrome-os-partner:53992
TEST = Reef board wakes up from S3 on lidopen.
Change-Id: Ic3bae26cea0642f98d938b3523d08f5902a1f4b5
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15643
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Reduce duplicate code by using the Chrome EC SMI helper functions.
BUG=chrome-os-partner:54977
Change-Id: Ie83e93db514aa0e12e71d371d7afab34a70797fd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15689
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Reduce duplicate code by using the Chrome EC SMI helper functions.
BUG=chrome-os-partner:54977
Change-Id: Iba2ca7185ad7f0566858ce99f5ad8325ecc243cf
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15687
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
|
|
Use the acpi_is_wakeup_s3() API instead of comparing
a raw value to a global variable. This allows for
easier refactoring.
Change-Id: I2813b5d275cbe700be713272e3a88fdb5759db99
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15690
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The mainboard_smi_sleep() function takes ACPI sleep values
of the form S3=3, S4=4, S5=5, etc. All the chipsets ensure
that whatever hardware PM1 control register values are used
the interface to the mainboard is the same. Move all the
SMI handlers in the mainboard directory to not open code
the literal values 3 and 5 for ACPI_S3 and ACPI_S5.
There were a few notable exceptions where the code was
attempting to use the hardware values and not the common
translated values. The few users of SLEEP_STATE_X were
updated to align with ACPI_SX as those defines are
already equal. The removal of SLEEP_STATE_X defines is
forthcoming in a subsequent patch.
BUG=chrome-os-partner:54977
Change-Id: I76592c9107778cce5995e5af764760453f54dc50
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15664
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Bitmap images will be moved to CBFS from GBB. This patch adjusts the
flash map accordingly for rambi, samus, peppy, parrot, falco, panther,
auron, and strago.
BUG=chromium:622501
BRANCH=tot
TEST=emerge-{samus,falco} chromeos-bootimage
CQ-DEPEND=CL:354710,CL:355100
Change-Id: I6b59d0fd4cc7929f0de5317650faf17c269c4178
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 201a82311ba539b9b02d546ba331ff5bf73e0edf
Original-Change-Id: I0b82285186540aa27757e312e7bd02957f9962ec
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/355040
Reviewed-on: https://review.coreboot.org/15658
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I98927a70adc45d9aca916bd985932b94287921de
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15285
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Without this patch, the CBFS loader won't load segments into the RAM.
Change-Id: If05c8edb51f9fe2f7af84178826f93b193cfd8a9
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15511
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This mainboard contains an external RTC chip PCF8523. Enable usage of
this chip and add some initialization values to device tree.
Change-Id: I25c0a017899ee904f3aa02bdc7dcaf61dee67e3a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15642
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch adds a mainboard SMI handler file which has
functions to set proper Wake mask before going to sleep
so that system can wake up on lidopen, key press etc.
Also SCI mask is set on boot which will enable timely update
of battery UI on charger connect/disconnect.
BUG = chrome-os-partner:53992
TEST = Amenia platform wakes from S3 on lidopen, key press and also
sysfs entry for AC is updated on charger connect/disconnect.
Change-Id: If3dc6924c51c228241b7a647566b97398326ec0e
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15616
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch adds a mainboard SMI handler file which has
functions to set proper Wake mask before going to sleep
so that system can wake up on lidopen, key press etc.
Also SCI mask is set on boot which will enable timely update
of battery UI on charger connect/disconnect.
BUG = chrome-os-partner:53992
TEST = Reef Platform wakes from S3 on lidopen, key press and also
sysfs entry for AC is updated on charger connect/disconnect.
Change-Id: I8c087994b48223b253dcf1cbb3ed3c3a0f366e36
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15615
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adds Maxim98357a support for amenia
using the generic driver in drivers/generic/max98357
Change-Id: I333d4e810e42309ac76dd90c19f05cf3e3a518f1
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/15624
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add support for ELAN touchscreen on I2C3.
Change-Id: Id8b07a3a3fd4beca0d7ce804ba8d6859275c70d9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15499
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This changelist updates gpio config for speaker SDMODE pin.
It disables speaker by default.
Audio kernel is expected to enable this when audio rendering starts.
Change-Id: Id33ad29e637bf1fe6b02e8a4b0fd9e220e8983b6
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/15623
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Gru and derivative boards use TPM2 to support Chrome OS verified boot.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=re-built Kevin firmware, verified that TPM2 support over SPI is
enabled, and that with appropriate vboot and depthcharge patches
applied the device can boot into chrome os properly verifying RW
firmware and kernel key indices.
Change-Id: Id14a51cea49517bd2cc090ba05d71385aad5b54c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 60e229d93d7e219e261b851f654e459eb2cf4f41
Original-Change-Id: Ic6f3c15aa23e4972bf175b2629728a338c45e44c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/354781
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: https://review.coreboot.org/15606
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a few missing Kconfig defaults for derivatives of the Oak and Gru
baseboards. Also group all Kconfigs that must change for derivatives
together for easier updating.
BRANCH=None
BUG=None
TEST=None
Change-Id: I95ebb08b4f13f09f2539b451d7b96a826ddf98f8
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: ae3f13c1dc323f4c7c4a176a4f5e1285fec312ce
Original-Change-Id: I658130e88daa2d113fd722b0527cf0e7ab66c7ef
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/357922
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15605
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Utilize the new interrupt macros in order to specify correct
polarity of the gpio interupts. Some of the interrupts were
working by catching the opposite edge of the asserted interrupt.
BUG=chrome-os-partner:54977
Change-Id: I55bee2c4363cfdbf340a4d5b3574b34152e0069c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15646
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Utilize the new interrupt macros in order to specify correct
polarity of the gpio interupts. Some of the interrupts were
working by catching the opposite edge of the asserted interrupt.
BUG=chrome-os-partner:54977
Change-Id: Iee33c0a949be0a11147afad8a10a0caf6590ff7b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15645
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Disable PCIe A0, A1, A2, A3, B1 ports.
Enable B0 port which is used for wifi.
BUG=chrome-os-partner:54288
BRANCH=None
TEST=lspci should show only PCIe B0 device
Change-Id: I266d6eb7ddd56888f6b07b59681c2d9f0a6c0a9e
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/15599
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
FSP1_0 places romstage ram stack at fixed location of
RAMTOP in low memory before returning to coreboot proper.
There is no possibility of making a complete backup of
RAMBASE..RAMTOP region and currently such backup is not
even attempted.
As a conclusion, S3 resume would always cause OS memory
corruption.
Change-Id: I5b9dd4069082e022b01b0d6a9ad5dec28a06e8b0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15576
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I195fd3a9c7fc07c35913342d2041e1ffef110466
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15549
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The HTIF is deprecated and the newest RISC-V binutils don't know the
mtohost/mfromhost CSRs anymore.
The SBI implementation still needs to be restructured.
Change-Id: I13f01e45b714f1bd919e27b84aff8db772504b1f
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15289
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This patch sets the devicetree for gpe0_dw configuration
and also configures the GPIO lines for SCI. EC_SCI_GPI
is configured to proper value.
BUG = chrome-os-partner:53438
TEST = Toggle pch_sci_l from ec console using gpioset command
and see that the sci counter increases in /sys/firmware/acpi/interrupt
and also 9 in /proc/interrupt
Change-Id: If258bece12768edb1e612c982514ce95c756c438
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15556
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch sets the devicetree for gpe0_dw configuration
and also configures the GPIO lines for SCI. EC_SCI_GPI
is configured to proper value.
BUG = chrome-os-partner:53438
TEST = Toggle pch_sci_l from ec console using gpioset command
and see that the sci counter increases in /sys/firmware/acpi/interrupt
and also 9 in /proc/interrupt
Change-Id: I3ae9ef7c6a3c8688bcb6cb4c73f5618e7cde342c
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15325
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- Update so that the RAM id is read from ADC instead of
hard-coded from the config array.
- Update the boardid readings so that they are bucketed instead
of within an error margin.
BRANCH=None
BUG=chrome-os-partner:54566,chrome-os-partner:53988
TEST=hexdump /proc/device-tree/firmware/coreboot/ram-code
and boardid when OS boots up. Also verified that
voltage read in debug output returns correct id.
Change-Id: I963406d8c440cd90c3024c814c0de61d35ebe2fd
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 068705a38734d2604f71c8a7b5bf2cc15b0f7045
Original-Change-Id: I1c847558d54a0f7f9427904eeda853074ebb0e2e
Original-Signed-off-by: Shelley Chen <shchen@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/356584
Original-Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/15586
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable reading of keyboard recovery host event from coreboot.
BUG=None
BRANCH=None
TEST=esc+refresh+power combo and make sure you
see recovery fw screen.
Change-Id: I166619d6202e23569395434e9dc1adb2a6a53296
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: f9279c8c06abb170589b1b11bf5287fbf38c9905
Original-Change-Id: Id980c77c8d7695b2c1b3343d968ad2a302d42aaa
Original-Signed-off-by: Shelley Chen <shchen@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/357841
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: https://review.coreboot.org/15585
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable CONFIG_EC_SOFTWARE_SYNC. Crossystem needs this to get ec RW/RO
info.
BUG=chrome-os-partner:54566
BRANCH=None
TEST=1. apreset from ec console. Check for
"VbEcSoftwareSync() check for RW update"
string in ap console.
2. Run "ectool version" from OS to check
that RO/RW version are different and
that we're in RW:
RO version: kevin_v1.1.4818-8243672
RW version: kevin_v1.1.4762-1957187
Firmware copy: RW
3. Run crossystem ecfw_act. check for
RW return value.
Change-Id: If6524f2cca4a6223ab9704d0af827e8c1072670f
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 0deb0e1c69d6bf21acf7640bf76f9196e14437d7
Original-Change-Id: I0db8235cf7d472f0aa642eea1998282d010d3433
Original-Signed-off-by: Shelley Chen <shchen@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/357811
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15584
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Reusing the LED patterns as it was defined for Storm/WW/Platform.
BUG=b:29051518
TEST=After about 3 seconds of powering on the device different colors
should be seen at the LED ring, depending on the state of the device.
Alternatively, move the device to different states manually by
appropriate actions (like dev mode, rec mode etc) and observe the
colors.
BRANCH=None
Change-Id: I6f1b23fee15747a402e209a2d06f8794bbc2c5a1
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: be1194b095d9a5cf269710c43a27a5afb3e87b29
Original-Change-Id: Ie82d4e148025c0040cdb26f53f028d9b4cbe2332
Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/355200
Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org>
Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org>
Original-Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org>
Reviewed-on: https://review.coreboot.org/15572
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This is needed to ensure that the ram-code node is included in the
device tree by depthcharge.
BRANCH=none
BUG=chrome-os-partner:54566
TEST=built updated firmware, booted on kevin into Linux shell, checked
the device tree contents:
localhost ~ # od -tx1 /proc/device-tree/firmware/coreboot/ram-code
0000000 00 00 00 01
0000004
localhost #
Change-Id: Ibe96e3bc8fc0106013241738f5726783d74bd78b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 53c002114f7044b88728c9e17150cd3a2cf1f80f
Original-Change-Id: Iba573fba9f9b88b87867c6963e48215e254319ed
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/354705
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15566
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Specify the memory initialization parameters in
mainboard/intel/galileo/devicetree.cb. Pass these values into FSP to
initialize memory.
TEST=Build and run on Galileo Gen2
Change-Id: I83ee196f5fb825118a3a74b61f73f3728a1a1dc6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15260
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Switch the I2C scripts to properly match the I2C address selection for
the Galileo Gen1 board.
TEST=Build an run on Galileo Gen1
Change-Id: I9fc8b59a3a719abb474c99a83e0d538794626da9
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15258
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Use the device driver for DA7219 device configuration in the SSDT and
remove the static copy in the DSDT.
Tested on reef to ensure that the generated SSDT contents are
equivalent to the current DSDT contents.
Change-Id: I288eb05d0cb3f5310c4dca4aa1eab5a029f216af
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15539
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adds Maxim98357a support for reef using the generic driver
in drivers/generic/max98357
Change-Id: I333d4e810e42309ac76dd90c19f05cf3e3a517e0
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/15435
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
IRQ 9 is used for different purpose on this board so move
SCI away to IRQ10.
Change-Id: I107bfb5ec8cd05f844ee75550779be7746e77a88
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15563
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Based on the board revision apply the correct GPIO changes.
The only differences are the addition of 2 peripheral wake signals
and a dedicated peripheral reset line.
BUG=chrome-os-partner:54959,chrome-os-partner:54960,chrome-os-partner:54961
BRANCH=None
TEST=Built and tested on reef.
Change-Id: I9cac82158e70e0af1b454ec4581c2e4622b95b4b
Signed-off-by: Aaron Durbin <adurbin@chromuim.org>
Reviewed-on: https://review.coreboot.org/15562
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The board build version is provided by the EC on reef.
Provide the necessary functional support for coreboot
to differentiate the board versions.
BUG=chrome-os-partner:54959,chrome-os-partner:54960,chrome-os-partner:54961
BRANCH=None
TEST=Built and tested on reef.
Change-Id: I1b7e8b2f4142753cde736148ca9495bcc625f318
Signed-off-by: Aaron Durbin <adurbin@chromuim.org>
Reviewed-on: https://review.coreboot.org/15561
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
While the proto boards didn't have a memory SKU notion the
EVT boards do. Therefore, provide support for selecting the
proper memory SKU information based on the memory id straps.
This works on EVT boards because the pins used for the
strapping weren't used on proto. However, internal pullups
need to be enabled so that proto boards read the correct
id.
BUG=chrome-os-partner:54949
BRANCH=None
TEST=Built and used on reef for memory config.
Change-Id: I8653260e5d1b9adc83b78ea2770c683b72535e11
Signed-off-by: Aaron Durbin <adurbin@chromuim.org>
Reviewed-on: https://review.coreboot.org/15560
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I6d51f46240c62fcd6089411e8681e0b6e7d5bfe4
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/15222
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I3cffe9d832edbbea79cabca639d9d920b7ffcf9a
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/8178
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
A call to early_mainboard_init is already present in verstage, thus it
is only necessary to call it from romstage when not in vboot context.
Change-Id: I2e0b5a369c5fb24efae4ac40d83a31f5cf4a078d
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15450
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This setting will enable S0ix for LPSS
Change-Id: Ie07cb8437d0cee61a03638aa980fd3322fef0c4e
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15056
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Since SPI controller opcode registers are locked by FSP, they need to be
initialized to a known good state before ReadyToBoot event and after
every SPI flash access (e.g. for MRC cache) has been finished in order
to enable the OS to use SPI controller without constraints.
Change-Id: I0a66344cd44e036c3999ae98d539072299cf5112
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15547
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable NC FPGA driver for this mainboard.
Change-Id: I87b6b10038f3d161a25b2008b7ea44b5627cca43
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15545
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
