Age | Commit message (Expand) | Author |
2010-08-27 | drop three unneeded config variables: | Jens Rottmann |
2010-08-26 | Remove unused mainboard_config definitions. Trivial. | Myles Watson |
2010-08-26 | CONFIG_DEBUG_RAM_SETUP and CONFIG_DEBUG_SMBUS are only available if the board / | Jens Rottmann |
2010-08-26 | kontron 986lcd-m: Fix compilation if there is no oprom execution at all... | Stefan Reinauer |
2010-08-25 | Fix i945 based boards | Stefan Reinauer |
2010-08-24 | * Adds support for PC Engines Alix.2D(1)3 board to Coreboot. | Aurelien Guillaume |
2010-08-20 | Remove a couple of warnings. Trivial. | Myles Watson |
2010-08-20 | Add support for the HP DL145 G1, based on the Tyan s2881. | Oskar Enoksson |
2010-08-18 | The attached file add pa78vm5 dev3 detection function to avoid the building e... | Wang Qing Pei |
2010-08-17 | Attached patch removes unnecessary IRQ routing info (for ACPI, mptable etc ne... | Rudolf Marek |
2010-08-17 | Commit (non-working!) Jetway PA78VM5 mainboard | Wang Qing Pei |
2010-08-17 | Another AMD 780/700 mainboard: Gigabyte MA78GM-US2H | Wang Qing Pei |
2010-08-17 | Tilapila supports both dual slot and single slot. The difference should be | Wang Qing Pei |
2010-08-17 | Add support for Gigabyte MA785GMT mainboard. | Wang Qing Pei |
2010-08-17 | fix nokia ip530 Kconfig, missed on last check-in | Stefan Reinauer |
2010-08-17 | Whatever happened here,... The DEC Tulip is a network card, no bridge of any | Stefan Reinauer |
2010-08-16 | White space changes for s2881 device tree. | Myles Watson |
2010-08-14 | My old mcp55 azalia fix from May 2010. Was never checked in. | Stefan Reinauer |
2010-08-13 | Build 8151 for s2885. Trivial. | Myles Watson |
2010-08-03 | Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user / | Stefan Reinauer |
2010-08-01 | make early_mtrr_init() invisible for cache as ram targets as it breaks them. | Stefan Reinauer |
2010-08-01 | Clarify a comment on an old hack, remove the call to early_mtrr_init | Corey Osgood |
2010-08-01 | Update my old, no longer active email addresses | Corey Osgood |
2010-07-28 | Let Geode GX2 use geode_post_code.h just like Geode LX | Nils Jacobs |
2010-07-26 | This patch converts the Geode GX2 boards to CAR. | Nils Jacobs |
2010-07-26 | Make include paths more consistent. Fixes compilation errors for me. | Myles Watson |
2010-07-08 | Ugly temporary fix until we figure out how to deal with the race condition. | Myles Watson |
2010-07-08 | Fix all warnings in the tree | Stefan Reinauer |
2010-07-07 | Kill a few more warnings. | Myles Watson |
2010-07-06 | Select HAVE_OPTION_TABLE for msi/ms9652_fam10. It fixes the build and doesn't | Myles Watson |
2010-07-06 | Re-integrate "USE_OPTION_TABLE" code. | Edwin Beasant |
2010-07-06 | A bug fix: | Myles Watson |
2010-06-25 | Add new function to create all mptable entries for buses by | Patrick Georgi |
2010-06-22 | Finish fixing Tyan s2881. Simplify ADT7463 initialization code. | Myles Watson |
2010-06-21 | This patch adds support for the Intel D810E2CB (i810e/ICH2) desktop board. Hu... | Joseph Smith |
2010-06-21 | This patch adds support for the Intel D810E2CB (i810e/ICH2) desktop board. Hu... | Joseph Smith |
2010-06-20 | This patch implements GFXUMA on all supported i810 boards. Also some fix-ups ... | Joseph Smith |
2010-06-17 | Always enable parent resources before child resources. | Myles Watson |
2010-06-10 | Fix a missing include file that was breaking the Traverse Geos build. | Edwin Beasant |
2010-06-10 | This commit updates the Geode LX GLCP delay control setup from the v2 way to ... | Edwin Beasant |
2010-06-10 | The devicetree was wrong, but I'm still surprised it broke. This fixes the | Myles Watson |
2010-06-09 | Same conversion as with resources from static arrays to lists, except | Myles Watson |
2010-06-09 | This patch adds the ECS P6IWP-Fe board to coreboot. | Anders Jenbo |
2010-06-07 | Fix some of Peter's suggestions for the Nokia IP530. | Myles Watson |
2010-06-07 | replace outb -> port 0x80 with post_code() in some places. | Stefan Reinauer |
2010-06-05 | Fix two warnings: | Stefan Reinauer |
2010-06-04 | Kconfig value is hex, not int. | Myles Watson |
2010-06-04 | 128KB is the default, and isn't large enough with the 30K payload for abuild. | Myles Watson |
2010-06-04 | Fixes for Nokia IP530 and associated drivers. | Marc Bertens |
2010-06-01 | CONFIG_DEBUG is too generic. Remove it and replace it with CONFIG_DEBUG_SMBUS | Myles Watson |
2010-05-30 | This patch adds support for mainboard iBASE:MB899 | Bernhard M. Wiedemann |
2010-05-25 | Move CS5535 specific setup from GX2 driver to CS5535. | Stefan Reinauer |
2010-05-25 | also rename the config option. | Stefan Reinauer |
2010-05-25 | fix most usbdebug warnings and fix function names. | Stefan Reinauer |
2010-05-25 | Long ago we agreed on kicking the _direct appendix because everything in | Stefan Reinauer |
2010-05-25 | Fix usbdebug compilation. | Stefan Reinauer |
2010-05-21 | Add "reasonable" values in ASL at places we overwrite from | Stefan Reinauer |
2010-05-20 | Move generation of mptable entries for ISA to generic code. | Patrick Georgi |
2010-05-20 | Add support for the Traverse Technologies Geos mainboard. | Nathan Williams |
2010-05-16 | Following patch reprograms SIL3114 into PCI IDE native mode compatible class ... | Rudolf Marek |
2010-05-16 | Add support for the Getac P470 | Stefan Reinauer |
2010-05-16 | v2 -> v4 | Stefan Reinauer |
2010-05-14 | ITE IT8671F: Add it8671f_48mhz_clkin(). | Anders Jenbo |
2010-05-14 | Add initial support for the GIGABYTE GA-6BXE. | Anders Jenbo |
2010-05-14 | i945: | Stefan Reinauer |
2010-05-14 | Remove another set of includes from Fam10 romstages: | Patrick Georgi |
2010-05-14 | license header fixes | Nils Jacobs |
2010-05-14 | This patch cleanes up the Wyse S50 port and unifies the memmory regions | Nils Jacobs |
2010-05-09 | Remove pc80/serial.c includes in ROMCC boards and include | Patrick Georgi |
2010-05-08 | autoprobe apic cluster and application processors on K8 systems | Stefan Reinauer |
2010-05-08 | Add the Wyse S50 thin client to Coreboot. | Nils Jacobs |
2010-05-08 | Drop console/console.c and pc80/serial.c from mainboards' | Patrick Georgi |
2010-05-06 | Remove duplicate Kconfig entry. Trivial. | Patrick Georgi |
2010-05-05 | Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster" | Patrick Georgi |
2010-05-04 | Fix arima/hdama. It was changed to match newconfig, which was broken. | Myles Watson |
2010-05-03 | Qemu, despite "emulating" an intel chipset, uses the CMOS to | Valdimir Serbinenko |
2010-04-30 | Get rid of a few more warnings. | Myles Watson |
2010-04-27 | Since some people disapprove of white space cleanups mixed in regular commits | Stefan Reinauer |
2010-04-25 | Fix the the build of r5494 on Asus A8V-E SE. The K8M890 and K8T890 | Rudolf Marek |
2010-04-25 | try to unify timing initialization across those boards that need it... | Stefan Reinauer |
2010-04-25 | Following patch changes the K8M890 VGA handling. It reverts the framebuffer size | Rudolf Marek |
2010-04-25 | no warnings days. | Stefan Reinauer |
2010-04-25 | zero warnings days | Stefan Reinauer |
2010-04-25 | Trivial. The comment also need to modify. | Zheng Bao |
2010-04-25 | The device number of SATA SB700 is 0x11, while the one of SB600 is 0x12. | Zheng Bao |
2010-04-24 | drop all duplicate copies of vgabios.c in favor | Stefan Reinauer |
2010-04-23 | AMD Tilapia board support as a demonstration of an AMD Fam10 DDR3 board. | Zheng Bao |
2010-04-22 | via epia-m now works with default x86.c instead of its own copy of vgabios.c. | Stefan Reinauer |
2010-04-22 | zero warnings days... | Stefan Reinauer |
2010-04-22 | fix compilation remaining geode boards | Stefan Reinauer |
2010-04-21 | * clean up all but two warnings on artecgroup dbe61 | Stefan Reinauer |
2010-04-20 | fix artecgroup dbe61 | Stefan Reinauer |
2010-04-20 | As Myles suggested a while back: Switch long time #warnings to be comments | Stefan Reinauer |
2010-04-19 | Add support for the Nokia IP530. | Marc Bertens |
2010-04-16 | zero warnings days: unify mp tables. fix warnings. | Stefan Reinauer |
2010-04-15 | remove more warnings. move ROOT_COMPLEX selection to fam10 | Stefan Reinauer |
2010-04-15 | don't leave VGA disabled by default on thomson ip1000 | Stefan Reinauer |
2010-04-15 | zero warnings days... | Stefan Reinauer |
2010-04-15 | Remove a few more warnings from fam10. | Myles Watson |
2010-04-14 | zero warning days. Move RAMTOP and RAMBASE together. | Stefan Reinauer |