| Age | Commit message (Collapse) | Author |
|---|
|
haswell/gma.c
The code to set the graphics translation table has been in the
mainboards, but should be in the northbridge support code.
Move the function, give it a better name, and enable support for > 4
GiB while we're at it, in the remote possibility that we get some 8
GiB haswell boards.
Change-Id: I72b4a0a88e53435e00d9b5e945479a51bd205130
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171160
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit d5a429498147c479eb51477927e146de809effce)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6741
Tested-by: build bot (Jenkins)
|
|
Peppy had some issues with FUI. We decided it was time to create
peppy-specific gma.c and i915io.c files. Using yabel and the i915tool,
we generated a replay attack, then interpolated against the slippy
i915io.c to get something working.
Also, in preparation for moving code out of the mainboard gma.c to
generic driver code, we got rid of some hardcodes in the mainboard
gma.c that have no business being there. The worst were the
computation of gmch_[m,n] and it turns out that we had some
long-standing bugs related to confusion about 'bpp'. I've killed the
word bpp everywhere I could because there are at least 3 things that
correspond to bpp. We now have framebuffer, pipe, and panel bpp. The
names are long because I want to avoid all the mistakes we've all been
making in the last year :-) Sadly, that means a lot of changes not just
peppy-related, but they are simple and in a good cause.
The test pattern generation is driven by a global variable in
mainboard/peppy/gma.c. I've found in the past that it's very useful
to have a function like this available, as one can activate it while
using a jtag debugger: halt at the right place in ramstage, set the
variable to 1, continue. It's not enough code to worry about always
including.
The last hard-codes for M and N registers are gone, and the function
to set from generic intel_dp.c code works. To avoid screen trash on a
dev mode boot, which we liked but nobody else did :-), we now take the
time to put a pleasing background color that sort of doubles as a
power LED.
Rough timing is ramstage start is at 2.2, and dev setup is done at
3.3. These new platforms are depressingly slow to boot. Rom init alone
is taking 1.9 seconds. 13 years ago it was 3 seconds from power on to bash
prompt. These CPUs are at least 10x faster and take much longer to get going.
Future work, once we get this through, is to move more functions to the
intel driver, and combine the mainboard i915io.c into the mainboard gma.c.
That separation only existed because i915io.c was generated by a tool, and it
had lots of ugliness. Most ugliness is gone.
Old-Change-Id: I6a6295b423a41e263f82cef33eacb92a14163321
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/170013
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
(cherry picked from commit 8cdaf73e3602e15925859866714db4d5ec6c947d)
snow: Fix a typo in devicetree.cb that was breaking the snow build.
A typo in a recent change broke the snow build.
Old-Change-Id: I93074e68eb3d21510d974fd8e9c63b3947285afd
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171014
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 154876c126a6690930141df178485658533096d2)
Squashed a fix into the initial patch and updated nehalem/gma.c
to have a non-static gtt_poll.
Change-Id: I2f4342c610d87335411da1d6d405171dc80c1f14
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6657
Tested-by: build bot (Jenkins)
|
|
override default ivy VGA_BIOS_ID
add model & part number
Remove ARCH_X86 as is in,
fd33781 Move ARCH_* from board/Kconfig to cpu or soc Kconfig.
Change-Id: I61dc6434de7af2d8672f784df87a8b9d3f0fb068
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6759
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I33e71c0a246583885368dc3d3af761c190b2fb5c
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6758
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I3b13bddfc127353e0c13d8d2ae7918d5c3deb72c
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6760
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Change-Id: I917a89da50d8efe998c368ba46206f2a1c580fd0
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6756
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This disables the blink hardware as it seems to be in the dump. This is
safer as it does not rely on 0 as the reset value when '0x00040000' is
the default according to the util/inteltool. As seen:
gpiobase+0x0018: 0x00040000 (GPO_BLINK) DIFF
Change-Id: Ia1fde108bf3752484f5e991600c435f776af0ced
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6436
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Use defines of offsets rather than hard coded values.
Change-Id: Id2471cd22aa402d74163473e48f86af9789cdaa7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6435
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Change-Id: I6b80ad0da39e93072e28b48c40e1c71602133e7b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6750
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
GPIO pin wireing information from schematic
Change-Id: I2d8dca151b6fbc15e0184ea07596039570843cda
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6740
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
SATA Port documentation
PCIe unused ports and documentation
T520 have no keyboard backlight
Change-Id: I517ff8519ea22a9a7a9b6e3136efd15d4a0f8fc4
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6743
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I71398ab2d7ef5b9256795861dd2bebbb0cf32d5f
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6742
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I60fa19b72f91f16db5f354aeec631f661e3494d3
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6736
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Thinkpad T520 ExpressCard Slot PCIe lanes are connected to port 4.
Tested with Serial Port Card. Information read from schematic / lspci
Change-Id: I459943d427578d135f9aed1aa66da269ddfeee87
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6735
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Clean up both ram and rom stage support and fix board to match.
Change-Id: I55e3e7338c0551f0fb663eb9707f16ecdc1aca35
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6509
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Compile romstage component as link-time symbols. Pass CONFIG_TTY0_BASE
as argument instead of hard coding and playing funny business with the
pre-processor. Fix board to match.
Change-Id: If6d0d5389bd4e7765bb6056cf488c94fd45915c2
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6463
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Change-Id: Iadaa6172347ebb7d367d1faa6ed9462fff07d7e6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6730
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I26fa6508f50faff7f1c1724884b5ffa30463b896
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6728
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ic877d6285ce3983268b16ddb5b4e15743f5adf86
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6727
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I560d693d0d72ca8dcd099eff6b0c40716fb0c0b0
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6726
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I58760500252e78da947685c18201b6d446368333
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6729
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I37d48279b1b022c4573bd09d3db6bf536d5dab9a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6724
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: If771a84f25710e1fb2228816e3ca0139e2f95aa7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6732
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
As is in:
91175bb lenovo/x201 & x230: Add EC info to SMBIOS
This is needed for the Linux driver for the Lenovo's to properly attach.
Change-Id: Ib910b25f392d9d3d6362b6909ce9fd4eeae9a096
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6399
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I09852ea56495da17e7607064d74d98f2296f34b1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6721
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ibf66d46f47fe465cc805f85de818a77327cd7258
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6722
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I952fdb113e2696785695b416d9292b7107099994
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6723
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ie686d20811f33c620156c149315807343dde7784
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/6700
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Change-Id: Ifa1045abc761bef05977a8020cf6f18db042ad58
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6699
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Id55bf259d5af187ba718de7e367395adcfc567b4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6707
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I8b210786f660e2b2bae0d9ddd594386fd107cbe4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6706
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I9b496e8ff92ee575d0b780eab0cb45ea05506d30
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6708
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I4e25630ae82e8030a9d6bfccb60844c301b1d635
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6705
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Trustzone needs to be initialized/disabled both on boot and on wake, so it
needs to be done before ramstage which doesn't run on wake. cpu.c isn't
compiled into romstage and fixing that causes other problems, so the trustzone
functions were split out.
Change-Id: I8fc630237ebec1f02a91600f8baf3d4e9ea66d0e
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/169817
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 055ed0e28476123b0bd666109af90baf40aadcee)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6666
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This patch adds support for the DesignWare3 USB 3.0 DRD controller and
PHY to the Exynos5250 and Exynos5420 CPUs. It also adds code to the
Google Snow and Pit boards to turn these controllers on where
applicable.
Change-Id: Idcca627363a69f1d65402e1acb9a62b439f077ff
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169452
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit e9809ae12ef8b8bd6cd61d3f604cb9e4718cf7eb)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6642
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Tested by marcus.
Change-Id: Ifce2018ef49619b36fb07e5345d70c358a0397e4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6698
Tested-by: build bot (Jenkins)
Reviewed-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Icf46ad1397c67478887c80a627b8f4eb0a67e542
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6695
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Code cleanup requested in commit 90957f88 -
"mainboard/intel: Add Mohon Peak CRB for Intel's atom c2000"
- Change com2 to COM2 in Kconfig text
- clean up includes of headers
- fix whitespace
Change-Id: I828bc4781ee7de95be5546206c5d6033b75293d9
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6607
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This matches what was done on baytrail in commit bfca984b -
soc/intel/fsp_baytrail: set up for including irqroute.h twice
irq_helper.h intentionally gets included into irqroute.asl twice - once
for pic mode and once for apic mode. Since people are used to seeing
guard statements on the .h files, add the guards to irqroute.h and add
a comment to irq_helper.h explaining why they aren't there.
Change-Id: I709f9370ce7db1b3ffac2297aeaba5cc670ec20c
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6606
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Use tab between "COREBOOT", and comment.
This fix was requested in 90957f88 -
"mainboard/intel: Add Mohon Peak CRB for Intel's atom c2000"
Change-Id: If9fb6158cca95341ab57db1125e85648b616b72c
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6601
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I0bb939ac377f84431d871b702fdb42651e9a2e96
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5324
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Some of C-states still cause hang. Revert C-states patch.
This reverts commit fe661612d8e94d41dc0129533bb02f7c4faaf11a.
Change-Id: I7534dac5d27b853d7b93947c38bf3742797fdcc2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6694
Tested-by: build bot (Jenkins)
Reviewed-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Change-Id: I9e8628d879a193e2f6ba561ee17f24ae94435e1a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6693
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Now battery indicator and lid work.
Change-Id: I2f747a408e331a245d91dd5f9c7ead0729f02a67
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5323
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Current problems:
- Complete lack of EC support (no battery indicator, no temperature, ...)
- No audio support
Change-Id: I25d09629dd82e01fadca2b6c25f72aaf08eafae1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Axel Holewa <mono@posteo.de>
Reviewed-on: http://review.coreboot.org/5321
Tested-by: build bot (Jenkins)
|
|
Old init was a replay not even meant to have been committed.
This one really computes values and does its job. Tested on
Macbook2,1 (1280x800) and X60 (1024x768).
Change-Id: I61b6946c095fe06e20ae9a0db54696d0568225dd
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5320
Reviewed-by: Francis Rowe <info@gluglug.org.uk>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I4c790b0eaf2af94286e6691281fcad3d14659a99
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6687
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I27b2ec70b9c77f3caf9d52788f46f5dc16045d1b
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6686
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ief3baa985cf83059255e64a8ab78cad9f8571199
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6688
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Tested on lenovo X200 in both text and gfx mode.
Change-Id: I273971d0f34ca3529959d4228e9516775459b806
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6682
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This header has nothing to do with cache-as-ram. Therefore, 'car'
is the wrong term to use. It is about providing a prototype for
*romstage*.
Change-Id: Ibc5bc6f3c38e74d6337c12f246846853ceae4743
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/6661
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
A recent change to support early firmware selection on ARM broke snow and was
incompletely implemented on pit. This change fixes snow by applying
the remaining part of the change that had been applied to pit,
and also hooks up real values in the get_write_protect_state function.
Change-Id: Ifef7ad1bf399f79353daec3dd46973f2b2022e37
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/169120
Reviewed-by: David Hendrix <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 841773e048cd9cfbb64782059c24e29c467f17c8)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6635
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
When passing '-ffreestanding' the 'main' romstage.c may no longer
necessarily be considered the entry point.
From the C specification in 5.1.2.1 Freestanding environment;
"In a freestanding environment (in which C program execution may take
place without any benefit of an operating system), the name and type of
the function called at program startup are implementation-defined."
Clang complains about these being missing as Clang is somewhat more
strict about the spec than GNU/GCC is. An advantage here is that a
different entry-point type-signature shall now be warned about at
compile time.
Change-Id: I467001adabd47958c30c9a15e3248e42ed1151f3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5872
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Otherwise without USB when coreboot boots too quickly
EC is confused and thinks that LID is closed and so
powers off the backlight until user flaps the lid.
Change-Id: I14dfaa62582de83fd4c9f9518e9436b3a3035366
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6651
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Otherwise we get a warning on normal boot.
Change-Id: Ida1e1d23e258438251d4ec2417f93ad14c3b9f7d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6652
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This patch cleans out a lot of unused variables in the
ARM Kconfig files and introduces CONFIG_RAMSTAGE_BASE
which is similar to CONFIG_RAMBASE on x86.
This gets rid of the hard coded assumption that on ARM
coreboot is always executed at the lowest DRAM address.
But in fact, this might not be true because we might want
coreboot to live at the end of RAM, or in SRAM
Change-Id: I03e992645f9eb730e39a521aa21f702959311f74
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/168645
Reviewed-by: David Hendrix <dhendrix@chromium.org>
Tested-by: David Hendrix <dhendrix@chromium.org>
(cherry picked from commit 15b87892eb2d5e27759c49dc6c8c7e626f651d77)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6634
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
All this samsung_get_base_address_of_device_with_a_really_long_name()
boilerplate makes my eyes bleed... I think there are so much cleaner
ways to do this. Unfortunately changing this ends up touching nearly
every Exynos5 file, but I hope you agree that it's worth it (and the
sooner we get it over with, the better... I can't bring myself to make
another device fit into that ugly scheme).
This also removes the redundant EXYNOS5 base address definitions from
the 5420 directory when there are EXYNOS5420 ones, to avoid complete
confusion. The new scheme tries to use EXYNOS5 for base addresses and
exynos5 for types that are common between the two processors, and
EXYNOS5420/exynos5420 for things that have changes (although I probably
didn't catch all differences).
Change-Id: I87e58434490ed55a9bbe743af1f9bf2520dec13f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167579
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 66c87693352c248eec029c1ce83fb295059e6b5b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6632
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
For now using the same gma.c and i915io.c files as for slippy
Change-Id: Ieb09d0152d525aa090eeb86ebfa253d450d22820
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64373
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 3e119c7e22cb82677754413e56a125f4a372ad54)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6603
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This is required only for haswell since the register configs have changed.
Also, created mainboard specific header file
Original-Change-Id: I61bf8d7cef1f204735a2f72225c48d6e44a99945
Signed-off-by: Furquan Shaikh <furquan@google.com>
Conflicts:
src/mainboard/google/slippy/gma.c
src/mainboard/google/slippy/i915io.c
Conflicts:
src/mainboard/google/slippy/gma.c
Change-Id: I77f2542ca8228358f59aafd99c0d13168ab47fb5
Reviewed-on: https://gerrit.chromium.org/gerrit/66853
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 77f9d1ddd4376e2a290d466f0669a43997492c8e)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6602
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
mainboard/google/slippy/i915io.c
A large portion of documented registers have been initialized using macros. Only a few
undocumented registers are left out. i915io.c looks lot more cleaner by removing redundant
calls. However, some more work is required to correctly identify which calls are not required.
All the io_writes are replaced by gtt_writes.
Change-Id: I077a235652c7d5eb90346cd6e15cc48b5161e969
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/66204
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 39f3289f68b527575b0a120960ff67f78415815e)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6600
Tested-by: build bot (Jenkins)
|
|
Change-Id: I64e59648064d5875907b5057e2f9f72f2c5997b1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6631
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I81b9966212d09d4d2561b3adc20d6d8a8a200f4b
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6630
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This patch renames the x86 way of doing things to
explicitly mention CMOS (which is not available on
our ARM platforms) and adds an implementation to
get VBNV through the Chrome EC. We might want to
refine this further in the future to allow VBNV
in the EC even on x86 platforms. Will be fixed when
that appears. Also, not all ARM platforms running
ChromeOS might use the Google EC in the future, in
which case this code will need additional work.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: Ice09d0e277dbb131f9ad763e762e8877007db901
Reviewed-on: https://chromium-review.googlesource.com/167540
Reviewed-by: David Hendrix <dhendrix@chromium.org>
Tested-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit 8df6cdbcacb082af88c069ef8b542b44ff21d97a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6616
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This patch adds a mechanism to set aside a region of cache-coherent
(i.e. usually uncached) virtual memory, which can be used to communicate
with DMA devices without automatic cache snooping (common on ARM)
without the need of explicit flush/invalidation instructions in the
driver code.
This works by setting aside said region in the (board-specific) page
table setup, as exemplary done in this patch for the Snow and Pit
boards. It uses a new mechanism for adding board-specific Coreboot table
entries to describe this region in an entry with the LB_DMA tag.
Libpayload's memory allocator is enhanced to be able to operate on
distinct types/regions of memory. It provides dma_malloc() and
dma_memalign() functions for use in drivers, which by default just
operate on the same heap as their traditional counterparts. However, if
the Coreboot table parsing code finds a CB_DMA section, further requests
through the dma_xxx() functions will return memory from the region
described therein instead.
Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167155
(cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6622
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I08ca5eec94c70b43789122266d68af149772385c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6626
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I3326b6e3c412b6360af37030cefd13d95b704e70
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180750
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 1978b0f91b2e91d2251721c7c6981d51a6930b61)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6615
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This cleans up a few minor things (mostly #defines) of the memory code
for exynos5420, pit, and kirby. Specifically:
- CONCONTROL.empty is read-only, so don't try to set it and also
get rid of the unneeded DMC_CONCONTROL_EMPTY_ENABLE #define.
- MEMBASECONFIG* overlaps members of the mem_timings struct and
are mainboard-dependent anyway, so get rid of 'em.
- DMC_MEMCONTROL_TP_DISABLE corresponds to a reserved bit. It may
have been deprecated.
- Same with TIMING* #defines.
- Clarify DDR_MODE_* usage and use mem->mem_type when appropriate.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ideb21efcc97b24f7e115e90051c20daef4480f17
Reviewed-on: https://chromium-review.googlesource.com/167500
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 650dba32cb217414c422907398f68e784e5720e8)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6614
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
membaseconfig0/1 are utterly dependent on the mainboard's particular
DRAM setup. This defines their values in the mem_timings struct for
pit.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: Ifd782d1229b2418f8ddbf0bcb3f45cc828ac34b0
Reviewed-on: https://chromium-review.googlesource.com/167488
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 80eebd5bc0dbb9fabf81f46c25dcd5c5d5747579)
exynos5420: necessary updates for DRAM
This updates DRAM usage for Exynos5420 so that we can actually
use 3.5GB:
- Memory chips used with Exynos5420 may have 16 row address lines.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I86d1a96d0d1a028587f7655f8de5a2e52165e9d2
Reviewed-on: https://chromium-review.googlesource.com/167489
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 04bbaf5d8e125166dd689f656d5b37776be01fb1)
Squashed two related commits.
Change-Id: I4e45bc8a446715897ec21b0160701152fa6b226b
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6613
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This changes the number of chip selects that we configure from 2 to 1.
On current setups with (x16 memory 4Gbit chips) that means that we're
at 2GByte.
Technically we should add a second setting in the ares_ddr3_timings
and select between the two of the based on board strappings. That
would make the CONFIG_RUN_TIME_BANK_NUMBER work properly. I've
changed the ddr3_mem_ctrl_init() so it should handle that, but I'm not
actually doing the board strapping read right now.
This change means that accesses to 0xA0000000 - 0xFFFFFFFF on 2G
systems will no longer put the system in a messed up state (leading to
a hang). It also prevents some of the weird boot behavior that we've
seen that comes and goes depending on U-Boot alignment. See
<http://crosbug.com/p/20577>.
This patch was ported from: https://gerrit.chromium.org/gerrit/66117
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ib4cfe420aac30bd817438f06d01e8671afc4a27d
Reviewed-on: https://chromium-review.googlesource.com/167210
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 0ea574243058068702e3f6bc7355098745d16880)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6612
Tested-by: build bot (Jenkins)
|
|
Fine tuning DDR timings value for better stability
* Changed Data Driver Strength from 34 ohms to 30 ohms, expected to
enhance signal integrity.
* Changed DQ signal from 0xf to 0x1f000f, to keep default value safe.
* Changed mrs[2] and added new mrs direct command for setting WL/RL
without resetting DLL.
* Added explicit reset value write in phy_con0 instead of just setting
a bit, to ensure that reset happens.
* Added DREX automatic control for ctrl_pd in none read memory state.
This is ported from: https://gerrit.chromium.org/gerrit/61405
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I59e96e6dede7b49c6572548aca664d82ad110bb1
Reviewed-on: https://chromium-review.googlesource.com/66995
Reviewed-by: ron minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit ec34b711c6d270672c56d45c370ca14c0aa27ca3)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6611
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch moves around some of the existing Exynos5 USB 2.0 PHY code
to make it cleaner in preparation of the 3.0 PHYs. It moves the VBUS
GPIOs (which are completely board-specific) into the mainboard code and
makes sure to only initialize PHYs on the boards that actually need
them. It also removes the USB 3.0 PLL hack that was needed on Snow from
the Pit and Kirby boards (which do not have that PLL anymore).
Change-Id: Ia35f47a765acff60481f0907f7448ec4f78e0937
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66887
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit c3b1a8b687b535f4d5ac1b3bd2a4760151698fdb)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6609
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Apparently the IROM doesn't like data caches... the recently added
dcache-in-bootblock makes A-A booting fail, and flushes/invalidations
alone don't seem to fix it. It's pretty fast anyway, so we just disable
the cache again for the duration of the IROM call.
Also removes a superfluous invalidation line from the bootblock code...
dcache_mmu_enable/disable already take care of that.
Old-Change-Id: I35580d15664c7b4197d4ed14028720147adbf918
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66602
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit e9c28a6a7a88c8286e62764ee5ad2694da2e822f)
exynos5: Implement booting from SDMMC media
This patch augments the alternative CBFS media source implementation for
Exynos5250 and Exynos5420 to allow booting from SDMMC devices (such as
an SD or uSD card reader, if available). It also moves MMC
initialization for the Snow, Pit and Kirby boards from romstage to
ramstage (mainboard_init) to prevent it from interfering with the IROM
during SDMMC boot.
Old-Change-Id: Ic4adef80c28262d084a53c28ec59aa7ac3af50c8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66154
(cherry picked from commit 08de13b72432c076e3327c048df93d89d52b0ecc)
snow and pit: turn on FET4 (for SD card) at bootup
Explictly enable FET4 on Snow and Pit.
Historically we haven't needed to do this because:
* On snow there's a bypass around FET4 which effectively eliminates
it. Even if we don't turn on FET4 the SD card is still powered.
Turning on FET4 doesn't hurt though and is technically correct.
* On pit the EC turns on FET4 on cold bootup.
On pit we run into a problem if the kernel turns off FET4 like in
<https://gerrit.chromium.org/gerrit/#/c/65332/> and then we get a
software reset or warm reset. In this case the EC won't know to turn
it back on.
This was ported from: https://gerrit.chromium.org/gerrit/#/c/65673
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I57337f12b38889e6afee8577cf8807ec4c41e91c
Reviewed-on: https://gerrit.chromium.org/gerrit/66786
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
(cherry picked from commit e910117047d898b6b1d0dc965ef2ec0237d17646)
Squashed three commits for alternate cbfs SD support.
Change-Id: Idbd1fd4776cbf8cb20d03e6b691104cd8540a1ec
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6530
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: If7286abf91f758cfbac2c85dcad336f38f70d843
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6579
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Clean up as requested in commit e6df041b.
No functional changes.
Change-Id: Iec3f7ee25fd8351c7e13d660e2df6461f7745478
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6597
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The Bakersport board is a variant of the Bayley Bay mainboard that uses
one ECC DIMM instead of two non-ECC dimms.
This commit uses the Bayley Bay mainboard directory and modifies the
required pieces to add the Bakersport board variant. It disables the
second DIMM, points to an ECC version of the FSP, and sets the board
name to be Bakersport instead of Bayley Bay.
All of the code is still contained in the bayleybay_fsp directory. It
seems like duplicating the whole directory for the one line of code
that's actually different between the two platforms.
Change-Id: Ia31e9ee927a6810a01a1ae143fcb00cfb7d8a7aa
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5983
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
MinnowMax board using Intel's Bay Trail FSP
Working:
- Booting from SATA / USB / (USB3 with latest SeaBIOS)
Not working:
- Boot from SD
- S3 Suspend / Resume
***** To configure the FSP *****
Download the Bay Trail FSP and the binary config tool:
Modify the standard Bay Trail FSP:
run the bct tool with the command line options:
bct --bin <Bay Trail FSP Binary> \
--absf src/vendorcode/intel/fsp/baytrail/absf/minnowmax_Xgb.absf \
--bout <path to save the updated FSP to>
Here are the required changes for modifying the FSP manually:
Enable Memory Down: Enabled
DRAM Speed: 1066 MHz
DIMM_DWidth: x16
DIMM_Density: 4 Gbit (2GB Minnow Max) / 2 Gbit (1GB Minnow Max)
tCL: 7
tRP_tRCD: 7
tWR: 8
tRRD: 6
tRTP: 4
tFAW: 27
Other FSP values can remain the same.
***** To configure the vbios *****
The vbios is in the Bay Trail FSP package.
Download Intel's "Binary Modification Program" (BMP)
Use it to disable all ports except HDMI on port B.
Change-Id: I00d90e0d838d70c9d25c69f5115d0c9d6d19855c
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6429
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
irq_helper.h intentionally gets included into irqroute.asl twice - once
for pic mode and once for apic mode. Since people are used to seeing
guard statements on the .h files, add the guards to irqroute.h and add
a comment to irq_helper.h explaining why they aren't there. Add a
time.
Change-Id: I882cbbff0f73bdb170bd0f1053767893722dc60a
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6572
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This resolves WiFi issues after suspend/resume.
It needs related SPI descriptor soft strap change to
enable SLP_WLAN as a GPIO instead of owned by the ME.
Change-Id: I03f4458d1e52a913770d391061baa6cfa41e8558
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170577
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit cf1fe0524ad4793c8c422dc3fed3007b7fc96038)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6533
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
New SPD and update to the SPD map. Add both a 4GB and 2GB option.
4GB = RAM_ID{1,1,0}
2GB = RAM_ID{1,1,1}
Original-Change-Id: I37318c1b5a6ee84b7c55da00d326f10fe8af6f1e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit 7eb5a4ef1062a34e883c3f356ab0dc00ba07910d)
Change-Id: I0f35a7f5191fefeb5910a2d28aea153516d9a11d
Reviewed-on: https://chromium-review.googlesource.com/171693
Tested-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit b02fa777aa5935021b2c69f7345dffd111cbd118)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6545
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
gma_fui_init repeats the initializations already performed in gma_setup_panel.
These redundant initializations reset any gtt settings done before this call.
Hence, they had to be done again after call to gma_fui_init. However, the call
gma_fui_init is not required at all. Does not affect the behavior of suspend/resume.
Old-Change-Id: Idfb9f9930624694b878ddc0fe8648b3c8dd80e55
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65997
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit c376aea1b89c9a829874d5c657693993a3bb1f13)
Falco/Slippy: Patch to fix garbage on screen during graphics initialization in normal mode
Depending on the init_fb parameter:
1) For normal mode, first page is filled with zeroes and setgtt is used make all GTT entries point to this
same page
2) For developer/recovery mode, we init the gtt to consecutive pages
Old-Change-Id: I281b0b7efe01f7892e98b19ff9a63c04b087bd2c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65633
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 97c99dfe52ef3a87d387fdbf27ad3a28ad81c722)
Squashed two graphics related commits for Falco/Slippy.
Change-Id: I7ddb92672c026fe66f9fb0caba9d8fdc3f8a9d0a
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6536
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I485da5b8e9084c73f16b5df1c42879697fc0ac3d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6528
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Remove the lines added in an apparently unrelated commit 53ad9f58 (Make CONFIG_HAVE_HIGH_TABLES consistent in where and how it is set.)
which touched the symbol HAVE_HIGH_TABLES in all files except this one and
keep those added the same day in commit 6842c029 (Remove MAINBOARD_OPTIONS, which is a relic from early kconfig development.)
Change-Id: Ib055c25a0a0795a50a36e65218c8f31e921f1502
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6417
Tested-by: build bot (Jenkins)
Reviewed-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This disables the spread spectrum clock and avoids errata.
Old-Change-Id: I04eb767f1587bb64a215a92b66cd05e099d29964
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66673
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit a7bf0d818c431221f4d014e3a0130bec8db7406e)
falco: Remove RTD2132 driver from kconfig
Original-Change-Id: I89ad9fbfbc58878602ed85ada918524426b5bc77
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66946
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 1d732eb5e4743546b8ed50c8c44965a687f61ab2)
Conflicts:
src/mainboard/google/falco/Kconfig
Old-Change-Id: I317a0741779e272ad72b7272ef6f4a67abd66698
Reviewed-on: https://chromium-review.googlesource.com/167311
Tested-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit ffa6c89fbac04b4b6fceafd4ba97d39a285c4aa3)
Squashed two commits and corrected the subject line from 2312
to 2132.
Change-Id: If4f1e59999b70efe2de45522ba78051d9ed88dd7
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6527
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Register range 0x4f000 - 0x4f08f includes scratchpad registers. Fastboot
works fine with these registers removed and graphics is initialized properly
Change-Id: Ic57c526a90619f4a073690440f6c5ac6ca96bf10
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65755
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 7e7befdc3956cbc28d346545669cb55c566cf3ea)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6525
Tested-by: build bot (Jenkins)
|
|
Change-Id: I01a11923fc1b250afeed36acc20793fd072421ba
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/168574
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 46b5f64096c55d0d9627cb9537fc4910e1bddcd9)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6520
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The ALC283 needs a double function reset to ensure that all settings
are reset and the firmware beep is functional.
Original-Change-Id: Id9ddc6f4914957f39c5f9cdfaaac354808929146
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167291
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@google.com>
(cherry picked from commit c59865ac464af308baedcd69aa662f46ff3a04d3)
Change-Id: Ie6f3a8179376bc97a6d22712dd965f5e0e6ec5d6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167313
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit b31d7a31b838e67a4b7f33119a3baea049d30a36)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6518
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ia2e5427fec1bfff9babb9c59a3878323277f4f4c
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/66555
Commit-Queue: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 2b96235123d55db3ff5ae5c2454b65de831a1c18)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6524
Tested-by: build bot (Jenkins)
|
|
This patch ports the USB A-A firmware upload functionality from
exynos5250 over to exynos5420. Essentially just like a conflictless
cherry-pick of 9e69421f5f0eebf88c09913dee90082feab2856c. It also fixes
the exact same bug with SPI initialization for Pit and Kirby.
Old-Change-Id: Ief0ed54c0beb2701e51201041f9bc426b2167747
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65751
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 5dff43f929478f83939221df13b961a69f89b132)
exynos5: Fix trivial style nits
A few curly braces on the wrong line.
Old-Change-Id: I4ddac4476c6509dc1716e8c1915fbdb67d346786
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66153
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
(cherry picked from commit 41e3fd9eaafe36433723f4e96a6d94c04e5fbafb)
Squashed two related commits.
Change-Id: I22d579693b5e7270aacb45bbe3557e40893dd1f8
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6500
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ifc7208400b0bdfa2b9b70773bd24e9f9df7f8048
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6526
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This improves firmware boot time substantially. Because cbmem isn't available
yet, we need to allocate some space in sram for the ttb. Doing cache
initialization in the bootblock means we can implement this once per CPU
instead of once per mainboard.
Old-Change-Id: Iad339de24df8ec2e23f91fe7bf57744e4cc766c5
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65938
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c32b9b32ad933e627b9ea98434b392239b1fea73)
exynos5420: flush caches and disable MMU in resume path
This patch flushes the caches and disables the MMU before resuming.
c32b9b3 ("Set up caching in the bootblock.") had a bug where the
dcache and MMU remained enabled in the resume path. This caused
the machine to hang on resume. However, other bugs were preventing
us from testing this properly earlier on so it went unnoticed until
now.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: Ib1774f09d286a4d659da9fc2dad1d7a6fc1ebe5e
Reviewed-on: https://chromium-review.googlesource.com/67007
Reviewed-by: ron minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4fdf9763d25f70fd1e3591f6ff9785f78dd6170d)
Squashed two related commits.
Change-Id: Ibd42b28bb06930159248130e5ceaddb3b4b6cc2a
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6511
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Add verb setting for beep during recovery and dev mode.
Requires depthcharge CL.
Change-Id: I13cbb4e889ebc4c27bb4ab9fa49601b03e872d09
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/66519
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit c072543946b317192a8e80a744c1515deb414456)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6502
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I7332eeed244877252074e661f1c256a69a9b428a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6482
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
As was done for the reference boards in:
cd30951 mainboard/amd: De-ASCIIartify reference boards
Change-Id: Ie34aa5269388b771daa6934f8aff0314ac6778d5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6290
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
Gizmo sends two southbridge GPP PCIe lanes to its high speed
edge connector. This change will allow developers to create
two x1 slots on an extender card.
Change-Id: Iba6c1a4caf7846d12e3960775d7bc906ca8ff385
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/6499
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I05cea020e77051bd3bc0e93b0c70e12b9b985d05
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6398
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We set up L2 cache early in romstage now so the old
function is now redundant.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: Icec93810ddd7feb48286d4b600cb2d58af38b7ef
Reviewed-on: https://gerrit.chromium.org/gerrit/65428
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit bb91f1078ea55a7c8bdc19336cef2ec9a5f4511f)
exynos: stack size: Increase the stack size to 16KB.
The lzma decoding function in the RAM stage allocates nearly 16KB on the stack
which is shared between the bootblock, rom stage, and ram stage. The stack had
been much too small and needed to be expanded.
Old-Change-Id: I1b74fff9b54e506320d58956b779b3a102e66868
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65937
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 243d8a80f68dd257ecc5b4e19614bc7f0f5d398b)
exynos: gpio: add a bigger delay when reading board strappings
Z-state pins were not reading reliably with a 5us delay, so increase
it to 15us.
This is ported from https://gerrit.chromium.org/gerrit/64338
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: Ife6ea2ef5989e1a4c17913278ab972f0fd7f7f35
Reviewed-on: https://gerrit.chromium.org/gerrit/65727
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 76f0f8203f1af3f461745cefcc94e97c422d9084)
exynos5420: enable DMC internal clock gating
lets enable memory controller internal clock gating for ddr3.
with these bits enabled we save some power out of ddr3.
This is ported from https://gerrit.chromium.org/gerrit/#/c/60774
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I2f9b0d78483b3ea7441f54a715c7c1e42eda3f7f
Reviewed-on: https://gerrit.chromium.org/gerrit/65728
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 022a81c44e655a9f81e974e730c0cecc1f048781)
exynos5420: Correct the 600MHz PMS value
In UM ver0.02, 600MHz clock PMS values differs from what is programed
currently. Though this also results in 600MHz clock, but it is better to
match what UM says. This patch chnage this as per UM
This is ported from https://gerrit.chromium.org/gerrit/#/c/65106/3
(Note: we already used the correct 600MHz value for KPLL)
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I6786815ab33427a23436e6ee37295f6c37dcd3d5
Reviewed-on: https://gerrit.chromium.org/gerrit/65726
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit ceabf57ca78449fa6e9cfd212bdf4774706de92f)
Squashed five commits pertaining to exynos.
Change-Id: I3fd894aed15b8cd161c30904a46dac7e07eb8992
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6425
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I5ac6608ebf78f2d48bc7f68bce9eae7a2be82332
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/6424
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
(Clone of Falco change Ie2111e4bb70411aa697dc63c0c11f13fbe66c8d8)
Old-Change-Id: I5feba8fdbafba6d2de9f7d3de6170defc0d45a32
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66536
Reviewed-by: Dave Parker <dparker@chromium.org>
(cherry picked from commit b78a872a6647d7bb82f6c06a75e4075e451a1622)
peppy: Disable unused clocks
CLKOUT for PCIE ports 2-5 and CLKOUT_XDP are not used
and can be disabled.
This change was modled after the change made in Falco:
Falco-Change-Id: I0f996e90f0ae42780de3a0c8dc5db00ec600748b
The only difference per schematic for Peppy was PCIe 1 supports
a NGFF interface. PCIe 0 is connected to WLAN.
Old-Change-Id: Ib4871cb2655316cb260ab33ada6b9d81f271377f
Signed-off-by: Steven Sherk <steven.sherk@se-eng.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/66693
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 8f12335013a510dee3c21b55251ab00c0fbac609)
Squashed two related commits.
Change-Id: Ibc5b902018eec07fdccaa8c6cb066ce918f6a6b5
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6419
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
There seem to be a significant number of shutdowns during suspend resume
tests related to critical temperatures. It is possible that we are getting
a bad reading from PECI and shutting down prematurely in some cases.
If we get a reading that is above critical then wait for the EC to re-poll
and then re-check the temperature in case it was just a bad reading.
Also add some ACPI debug messages when this happens.
Original-Change-Id: I0ab7bdcc50d133981c0f36fc696b06d4a1d939a7
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66937
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit a39d7b11dd7b2af37fc2658542d56b32e3966ed4)
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ib612266511d90749ec6507f8467c71523ee8fb95
Reviewed-on: https://chromium-review.googlesource.com/66939
Tested-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit e98da983dca7819490464bddf08b9c53f28d2712)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6457
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
All modes tested on X201.
Change-Id: I23df81523196ea3f5fdb10eb04f4496c00aaeb9f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6481
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
