aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2021-01-25sb/intel/common: Change some SMI loggingKyösti Mälkki
Change-Id: Ief0c3d36e6de6e18b7f2613f043ac4d31a193f9d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49249 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25cpu/x86/smm: Use common APMC loggingKyösti Mälkki
Unify the debug messages on raised SMIs. Change-Id: I34eeb41d929bfb18730ac821a63bde95ef9a0b3e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49248 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25mb/google/dedede/var/drawcia: Add support to handle pen detectionWisley Chen
For board version 6 afterward, it will have external pull-up for GPP_C12, and remove internal pull-up. BUG=b:177618684 TEST=emerge-dedede coreboot, check evtest if SW_PEN_INSERTED event (value:1/0) when insert/eject pen, and eject pen to wake system from s0ix Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I503873afb48384168dcd8a822c7246655898356e Reviewed-on: https://review.coreboot.org/c/coreboot/+/49469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com>
2021-01-25mb/google/kukui: Add panel for Katsuchenzanxi
Declare the following panel for Katsu: - BOE_TV105WUM_NW0 - STA_2081101QFH032011_53G BUG=b:176523929 TEST=build Katsu image passed BRANCH=kukui Change-Id: I59a02198bc0e13f2760677ae4ea3eb05eb883464 Signed-off-by: chenzanxi <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-25mb/google/zork: adjust the eDP panel power sequenceChris Wang
set pwron_varybl_to_blon to 0x5, which means fw will delay 20ms between backlight on and vary backlight. BUG=b:171269338 BRANCH=zork TEST=Build; Verify the UPD was passed to system integrated table; measure the power on sequence on dalboz Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I8af35eee7777a8e71b42f0c128795290b8c2c93e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-25mb/google/zork: add eDP tuning parameter to fix the eDP noiseChris Wang
needs to adjust the eDP phy setting to fix the eDP noise for WWAN. DP_VS_LEVEL0_PREEMPH_LEVEL0, = 0x00 (0.4v 0db) swing 0, pre-emphasis 0) COMMON_MAR_DEEMPH_NOM = 0x004B COMMON_SELDEEMPH60 = 0x0 CMD_BUS_GLOBAL_FOR_TX_LANE0 = 0x80 BUG=b:171269338 BRANCH=none TEST=Build; Verify the UPD was passed to system integrated table Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ibe720e26d2257e05a989eaa1fd85d542005cf6a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48734 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25mb/google/auron: Convert to ASL 2.0 syntaxElyes HAOUAS
Built google/auron (Lulu) provides identical 'dsdt.dsl' files. Change-Id: I5728b220e88d4105fcf6e5cee78662bc80fa01d7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-25mb/libretrend/Kconfig: Remove duplicated stringElyes HAOUAS
Change-Id: Iab19538e1f5a74b714cb2a34855d9717315b9018 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-25mb/51nb/Kconfig: Remove duplicated stringElyes HAOUAS
Change-Id: Ib184dbfef05608bbf18d49fee5cbc9dd12ed6751 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49883 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25mb/google/dedede/var/boten: Add custom SAR values for BotenKevin Chang
Add Boten customized SAR table. BUG=b:175931508 BRANCH=dedede TEST=build and test no Boten Change-Id: I3b00f56c8b890979cbf2155c97a3a064d8b0ba1a Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-25mb/google/dedede/var/magolor: Enable EC keyboard backlightTim Chen
BUG=b:177288782 TEST=emerge-dedede coreboot chromeos-bootimage Change-Id: I98f741da4a22494883939c4efe7960c66e71c6a7 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-25mb/google/dedede/var/sasuke: Enable bluetooth deviceSeunghwan Kim
"usb2_ports[7]" for internal bluetooth device was configured as 'USB2_PORT_EMPTY' mistakenly in previous patch, so we need to enable it again. BUG=None BRANCH=firmware-dedede-13606.B TEST=Built and verified BT device existence with lsusb Change-Id: Id2900152e23bbc2f454d064dc86a9e45e934ea0f Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-25trogdor: Explicitly initialize display pins in bootblockJulius Werner
This patch adds explicit initializations for the remaining named display (power) control GPIOs to the bootblock GPIO init code. These pins are usually mapped to pins that are already configured to pull-downs on power-on reset so this wasn't really required, but we have already moved them around so often that you never know when EEs might one day move them to a pin with a different power-on reset configuration, so it's better to be explicit. In one particular case, GPIO(67) (used by CoachZ rev1+ but not by anything else for the EN_PP3300_DX_EDP pin) is not actually a pull-down on boot, even though that is claimed by the datasheet. This is likely due to the fact that it can serve as the SPI_HOLD pin for the boot flash QSPI bus, so even though our board's boot flash doesn't really use that pin, it seems that the boot ROM still configures it as such. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I533baa962d2dfc87cfa510f442ed2e8912e0e5b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: mturney mturney <mturney@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2021-01-25mb/google/zork: Fix duplicate i2c_tunnel uidRaul E Rangel
This conflicts with the MSTH i2c_tunnel. BUG=b:175146875 BRANCH=zork TEST=Boot trembyle and inspect ACPI tables. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iac04c7dc361d427f5ebb99644aa70bd0c7dbb918 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-25mb/google/volteer/eldrid: Use #define symbols for usb2_ports configTim Wawrzynczak
It's easier to understand what these symbolic names mean rather than using the constants; the static.c will will end up (indirectly) including `soc/usb.h` therefore the macros are in scope here. Change-Id: I5ef977a05a2522e177f32c99bfab74f9288ae869 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-25mb/google/zork: update USB 2.0 controller Lane Parameter for gumbozKevin Chiu
From AMD USB phy specialist recommended that for DB port2 (type-A), port3 (type-C C1) the most effective corrections for the depressed eye are tx_rise_tune=0x0 tx_pre_emp_amp_tune=0x3 tx_fsls_tune = 0x3 BUG=b:173476380 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass USB 2.0 SI eye diagram verification Change-Id: Ib31c5d55e30b958d3e552e8d0b4a160947444636 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-25mb/google/zork: update USB 2.0 controller Lane Parameter for dirinbozKevin Chiu
From AMD USB phy specialist recommended that for DB port2 (type-A), port3 (type-C C1) the most effective corrections for the depressed eye are: tx_rise_tune=0x0 tx_pre_emp_amp_tune=0x3 tx_fsls_tune = 0x3 BUG=b:165209698 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass USB 2.0 SI eye diagram verification Change-Id: I80afd6bf1257b9a72d0d7651b48d243ebaf5de2f Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-01-25mb/google/kahlee: Deduplicate now-equivalent mainboard.cAngel Pons
The only difference is an additional include that is no longer needed. Change-Id: I0053d03aa4d05f5c0fa833d8634419b6667e38a7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49832 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25bayhub bh720: Configure VIH tuning via devicetreeAngel Pons
There's no need to repeat the same code on every board. Change-Id: I2e19decfe8609fa644e609673a56ee5109bafefa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49831 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25soc/intel/tgl and tgl mb/google,intel: Use the newly added meminit block driverFurquan Shaikh
This change uses the newly added meminit block driver and updates TGL SoC and mainboard code accordingly. TEST=Verified that UPDs are configured correctly with and without this change. Change-Id: I6d58cd6568b7bbe03c4e3011b2301209893e85a9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-25mb/asus/p5ql-em/Kconfig: Drop 'select ARCH_X86'Elyes HAOUAS
ARCH_X86 is already selected. Change-Id: I2be69e0b7a1889794121ed94380e543ac420218b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-24mb/google/poppy: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' are identical. Change-Id: I4f8b77b3f196ca51346bb7932a40875c4dd5d2a6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/razer: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated build/dsdt.dsl are same. Change-Id: I9c7cbc4ee874657a7381b1b220872c4ebecd0821 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46085 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24mb/packardbell: Convert to ASL 2.0 syntaxElyes HAOUAS
Built for packardbell/ms2290 provides same build/dsdt.dsl file. Change-Id: I5f1dbb2595c3ee8cb35bb8a6431288f4a96ce978 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lippert: Convert to ASL 2.0 syntaxElyes HAOUAS
Built provides same dsdt.dsl file for lippert/frontrunner-af Change-Id: I61d8af98e2003547e332f463b23c1e1cf79f7f00 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/x230: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I18667ae74454e0db83fb40d8f130909510ddc379 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/x1_carbon_gen1: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I9764d90e713f35d54056fbafae3e3ada18bea1eb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/x131e: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I3bee00030f03577b0449202233f7e76f7de96339 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/t530: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I95eab372b3c6b6df5231f0d232e878576bab5290 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/t520: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: Ice7cfc263c339ba9ec3705c1cee44a6d69f2e4d3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/t440p: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I91e25fe62080582b925fa1f1a88512f318ab9415 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/t430s: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I2825dff6b68da9b1e2bb13f03a4251af02438b66 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/t430: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: Id4a724193c4c120373a3e696ebd1fb7155fd8531 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/t420s: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I6e928c23165abad623ee3c2a26e090b029d55572 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/l520: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I9d0e4982888823bb62a174a603a126676e68e308 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/g505s: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I56f844706ba6bde3e57a6a81ff1d8e16863913f2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/t420: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I3890f75e3c27a689e9d57b4708514160e1550fdb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/t410: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I5859c64b0ccd1dfdce040b2c3bbdd9192617ffbe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/x60: Convert *.asl to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' are identical. Change-Id: I305561625d973093645236c77ef13a96ab780f94 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/x220: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I4c5c67d70e004eeece61e66d427d6f9df9cab4ec Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/x201: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' files are identical. Change-Id: I3b553e1b68ee8f236fcab311a076001b94a47975 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46204 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24mb/lenovo/x200: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' are identical. Change-Id: I0767afcb0ffdd6f9a8d83209955d42d9e89325e9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/biostar/am1ml: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'dsdt.dsl' files are identical. Change-Id: Ifdd5008bcb9c7e41e637a30f70316c7926f927b5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mainboard/lenovo/s230u/smihandler.c: Use __func__Elyes HAOUAS
Change-Id: If46ef5ffbd3de82d793a095b011e5740b776ff14 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mainboard/intel/strago/ec.c: Use __func__Elyes HAOUAS
Change-Id: Ifa30e9d2a71eae9a438e84367fd8b4f8bd920983 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mainboard/intel/emeraldlake2/ec.c: Use __func__Elyes HAOUAS
Change-Id: I75f534245d37f401357b611efc5c190e8a872d02 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/t400: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I4e6d5048ca9e949a70f3619f05b74870c1f1fe30 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/s230u: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' are identical. Change-Id: I8843d418bd9c34a4f079444bc6ce8ecd4559e36d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24arch/x86: Use wildcard for mb/smihandler.cKyösti Mälkki
Change-Id: I306f8cd74af62c0cd30f445d20c47f774f122481 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49247 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24broadwell: Flatten `mainboard_pre_raminit`Angel Pons
All Broadwell boards only use the `mainboard_pre_raminit` function to call `mainboard_fill_pei_data` and optionally `mainboard_fill_spd_data`. Move the declaration and weak definition of `mainboard_fill_spd_data` to platform code, replace the call to `mainboard_pre_raminit` in romstage.c with calls to `mainboard_fill_pei_data` and `mainboard_fill_spd_data`, and delete all other instances of `mainboard_pre_raminit` for Broadwell. Finally, delete now-empty romstage.c and spd.h files from mainboards. Change-Id: I3334b20bd7138bb753b996a137ff106e87c6e8a5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24broadwell: Clean up `mainboard_post_raminit`Angel Pons
Make it optional and change its signature. Change-Id: I4b5f3fb08e8954514ebf39e72c95aa62d66856d7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24soc/intel/broadwell: Select CPU_INTEL_HASWELLAngel Pons
This allows us to drop many now-redundant Kconfig options. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. The default configuration file also remains identical, as expected. Change-Id: I20b0200550508679bf2533342ce918b221dcf81e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-24mb/google/auron: Use Haswell CPU codeAngel Pons
The VR config and S0ix options are now specified for the CPU chip. Change-Id: I75e405d41b4a0605e786fe761c92535e62d0cfce Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46945 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24mb/google/jecht: Use Haswell CPU codeAngel Pons
Change-Id: I6c106b152bb2824e000232d23c2991898b2c4475 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46946 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24mb/intel/wtm2: Use Haswell CPU codeAngel Pons
Change-Id: I478576afa3b390cf5480298aafe6e049b5e90bff Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46947 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24mb/purism/librem_bdw: Use Haswell CPU codeAngel Pons
Change-Id: I736bff90305952d279a10dfe90a2ee3a533220b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46948 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-23mb/google/guybrush: Set FWM position to an upper addressZheng Bao
Setting other places causes build error. BUG=b:178241112 TEST=Build Change-Id: I85d5d44c458feed38d69f21f899d6b4380963ec7 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-23mb/google/auron: Drop `variant_romstage_entry`Angel Pons
Replace it with `mainboard_post_raminit`. Change-Id: I94636c775cee6c14317ecff36972e2d267d28c91 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Factor out SPD indexingAngel Pons
The code to read the SPD file and index it is not variant-specific. Change-Id: Iaee0a77934a45c65bf32dd0dba23cec654abc0b9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Factor out `mainboard_print_spd_info`Angel Pons
It is identical for all variants that have it. Change-Id: Iec3a5f036d9b760d1075059f2db1480b1c76273e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Merge two print statementsAngel Pons
They are part of the same line, so merge them. Change-Id: I969ce91f7a5f16a85750c140eaa444d7923b2014 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Drop `spd.h` from variantsAngel Pons
Factor out common DRAM SPD definitions and relocate SPD GPIO macros. Also factor out common function definition. Drop now-empty headers. Change-Id: Id05ba6c9cea27fbad5ee831f033d0de43717847e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/intel/coffeelake_rvp: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ib827e9b2919dbd0e16f30b8dfde46348365d9622 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-22mb/amd/majolica: Add PSP support for board majolicaZheng Bao
Change-Id: Ia2470a7297c7003c7975c7d9b977f2f97174efea Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48529 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/guybrush: Set the ROMSIZE as 16MZheng Bao
Change-Id: Iec8b40bd89c25cd2193aff8af45d0a09b07ad6a3 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49797 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/prodrive/hermes: Fix 30 second boot delayPatrick Rudolph
The PMC doesn't response any more due to invalid CNVi GPIO configuration. This caused a 30 second boot delay in FSP-S. Use the same values as FSP-S does. Always disable external I2S BT audio and use NF3 for pad GPP_D5 and GPP_D6. Tested on Prodrive hermes: No boot delay can be observed any more. Change-Id: I6f4a954786ec21512b0dce908d333952e96de048 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49678 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/octopus: Garfour override VBT selectionTony Huang
Disable DRRS in VBT to solve panel flick issue SKU ID 49/51 will use vbt_garfour.bin 50/52 will use vbt_garfour_hdmi.bin BUG=b:177783330 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check /run/debug/i915_drrs_status shows DRRS supported NO. Cq-Depend: chrome-internal:3534569 Change-Id: I5ebb66ec043a6b409dd5abbc31da417f50dbad5c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49635 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/nightfury: Update RAM IDs usageSeunghwan Kim
Add support LP_16G_2133 SPD for nightfury. BUG=None BRANCH=firmware-hatch-12672.B TEST=emerge-hatch coreboot Change-Id: I3709431d8ecb600e25909f456eb0c95db3a3cde2 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22mb/google/volteer/var/elemi: Update dptf parametersWisley Chen
Update DPTF setting from thermal team. BUG=b:177635236 BRANCH=volteer TEST=emerge-volteer coreboot chromeos-bootimage, and verified by thermal team. Change-Id: I87256b5c210ef12c09ef6dd948d80f406ae0500b Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-01-22mb/google/volteer/variants/eldrid: Configure USB2 port for Type-CNick Chen
1. USB2 ports 3 and 8 assigned to Type-C connector 2. USB2 port 3 keep USB2_PORT_SHORT setting and add .type_c flag BUG=b:177481076 TEST=tested on eldrid Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I42a39318a151bdf1f5aeb84bb1992be128cb4a4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/49452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22mb/emulation/qemu-q35: Account for TSEGArthur Heymans
TSEG is located below TOLUD. The size is configured in ESMRAMC but can also be configured with "-global mch.extended-tseg-mbytes=5" command line argument. Note that the size in ESMRAMC needs to be 'invalid' (3) for this to take action. coreboot will leave TSEG at the default 1MiB. Note that even if TSEG does not end up being used, it is likely a good idea to not put anything there as if SMM gets locked down by something else it will suddenly be inaccessible. Change-Id: I5fd82a42d6602f1369bb3c69556c46f537542705 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-22mb/getac/p470/acpi: Convert 'battery.asl' to ASL 2.0 syntaxElyes HAOUAS
IASL optimizes the code differently, which changes the binary. However, the generated `build/dsdt.dsl` remains identical. Change-Id: Ifcc8bf4022838056bf1fff853eb2027af684064e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45554 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/kukui: Enable MT8183_DRAM_EMCP for katsuSunway
The katsu project will be using eMCP board design. BUG=b:176271935 TEST=Boots on chromebook katsu successfully. BRANCH=kukui Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: I733a9a79e2ea6501e26bf79bfce2b1934a295342 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48893 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/siemens/chili: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to a bootblock gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Change-Id: Iad40b6315a29e7aea612a3e1a169372d296d1d6c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49443 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/up/squared: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I357099f797be178543a9e6637335cd0a68633071 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49441 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/kblrvp: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I8b30eb5d70c34ae3e2ed24ab52dd1357a54c5ae7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49439 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/minnow3: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I0b956427a9cec56d06b03f7f05138f75137b4ea3 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49437 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/leafhill: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ibc727302109456eb1d86652c947ce85b3a64c5b2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49436 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/glkrvp: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I80369ab70d5510cb4f388f3029119e7148361af4 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49435 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/apollolake_rvp: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to a early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Id6b55d7f3d3fbfc5b55497708f24006614760d03 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49434 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/tglrvp: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I130fd26944169430a84c3609432b1b5283581c99 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49432 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/jasperlake_rvp: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ie3878b47b8e20c51b928a38df9ccedf2d50d478e Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49431 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/icelake_rvp: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ib19a4f64eaf25bf2eb47ee60748a68538fc0729a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49430 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/reef: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I279956f30cbb6fb031cdfe6aaa09b644b6b7d3e7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49427 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/minnow3: drop unneeded call to lpc_configure_padsMichael Niewöhner
The LPC/eSPI pad configuration is already done at board-level. Thus, drop redundant configuration by dropping the call to lpc_configure_pads. Change-Id: Ib9e62bf19e6f1fbe32a340e4802c13504a0d6def Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49417 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/leafhill: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms by adding an appropriate early gpio table in the bootblock. The soc code gets dropped in CB:49410. Change-Id: Ie1e53e72c65fdcfe4be2e01134873aa7858c28ff Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49416 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/glkrvp: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms. This is done by adding one missing pad to the early gpio table and dropping the call to the soc function. The soc code gets dropped in CB:49410. Change-Id: I210633d4520fcfab59f68268bd7991557433ce38 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49415 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/up/squared: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms by adding an appropriate early gpio table in the bootblock. The soc code gets dropped in CB:49410. Change-Id: If0693a4419c58dde3c4536698940f03c30304b9d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49414 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/reef: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms. This is done by adding missing pads to the bootblock gpio table. The soc code gets dropped in CB:49410. Change-Id: I95993b1bd4f1fd8b4ac7b21fb89ec4d196b0240a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49412 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/hatch: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I62ffbe36bd7b7675aa0f41a8c6e9214d04ad4ae5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49428 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/glados: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I6fedcebea3bb31d992bac1e3b21382fea93a8b82 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49429 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/octopus: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ieeb738afd54e77ee853ee109009f611411aa0d4a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49426 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/dedede: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I5482f44b361925b7d2dbcbf1065c1be035c68b0b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49424 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/drallion: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I7dcf88d61c305f0598a0a79f8cfa46ef5009564b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-21mb/google/octopus: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms by adding an appropriate early gpio table in the bootblock. The soc code gets dropped in CB:49410. Change-Id: Ie33bae481f430a1c4410a0a4e2b2a34a3e78adaa Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49411 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/volteer/variant/lindar: Enable SA GV settingKevin Chang
Allow MRC training in SA GV. BUG=b:177779469 BRANCH=firmware-volteer-13672.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Idc9f634135b489450f53f8cd28d80649309d0f70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-21mb/google/guybrush: Add default FMD file to the buildMathew King
BUG=b:175143925 TEST=builds; binary has correct layout Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I4f3826c8ed0dfd7219eaa5f0cc285f1fe89a4e1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/49491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-21mb/google/volteer/variant/lindar: Configure USB2 port for type-cKevin Chang
Assigned USB2 port to type-c use. BUG=b:177483060 BRANCH=firmware-volteer-13672.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I9bd820406124927d56296508be05033217c0d472 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49638 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21cpu/intel/socket_LGA775: Increase DCACHE_RAM_SIZEElyes HAOUAS
Increase DCACHE_RAM_SIZE to 32kB and remove "NO_CBFS_MCACHE". It’s quite safe to increase DCACHE_RAM_SIZE. All LGA775 targets should have at least 256K L2 cache. That is plenty for XIP RO cache of bootblock + romstage and a 32K CAR. Change-Id: I393b2727bd90a990c3108a4dbead62b17d7fc531 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-01-21mb/google/dedede/var/boten: Update gpio config for botenStanley Wu
Correct GPIO settings as below reason: 1. GPP_G7 not being used but set to NF. 2. GPP_C22 and GPP_C23 is set to NC but internal pull down to 20K BUG=b:177283756 BRANCH=dedede TEST=emerge-dedede coreboot chromeos-bootimage and boot into emmc Change-Id: Idf25674efa2336bde98c5abaff278484fd71ea8b Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-03 05:44:26 +0000