summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2016-11-16mb/ga-945gcm-s2l: Clean up SuperioArthur Heymans
GPIO register at offset 0xfc (VID Input Register) is read-only but writing 1 to bit 0 will update initial VID input. Change-Id: Ie372e98f8e497eede382975262a63d58c16227b9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17412 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-16google/eve: Fill out memory ID tableDuncan Laurie
Add the DIMM SPD data for memory types that are not used yet but are on the matrix and may be used in future builds. Also fix a typo in the part number string for one type. BUG=chrome-os-partner:58666 TEST=build and boot on eve p0 Change-Id: I20401d7afb69f1c3ae1a3b0d6e3ec9097f54ef96 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17437 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-15mainboard/via/vt8454c: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/via/vt8454c. Change-Id: I94e22e1d814733c4049e78e5b3c23b9bb429f6fa Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17312 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15mainboard/via/epia-m700: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/via/epia-m700. Change-Id: I7a16a9f396d50279cf2bd13de72bd78e8f53f7d8 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17311 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15mainboard/via/epia-cn: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/via/epia-cn. Change-Id: I1b05abcedc427e4876e1fdab85298015308a3d17 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17310 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15mainboard/tyan/s8226: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/tyan/s8226. Change-Id: I41729fc03518a7804ae224c773967453a7ab60a7 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17309 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15google/link/i915.c: Fix build error when native gfx init enabledIru Cai
- Move members of struct edid to struct edid_mode - Change `u32 pmmio` to `u8 *pmmio` in i915_lightup_sandy Change-Id: Id64daf5eae1d4d8265105067b2e6ae55786a5638 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/17332 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-14google/chell : update DPTF policy settingsSumeet Pawnikar
Fine tuned DPTF policy values for chell device as below, 1. Increase Passive temperature value to 52 degree Celsius for TSR2. 2. Remove charger effect for TSR2. 3. Increase Minimum PowerLimit1 to 3W. 4. Reduce Maximum PowerLimit1 to 6W. BUG=chrome-os-partner:54718 BRANCH=None. TEST=Built for chell device. Change-Id: I46f69e3cd527ea3d28bdd7daa29d91f76770c277 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17376 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14intel/kblrvp: Enable TPMNaresh G Solanki
Add choice to build without TPM, TPM 1.2 support or TPM 2.0 support. Additionally configure lpc clock pad used with LPC TPM & update devicetree.cb. Change-Id: I1c24fdefa6e73637b3037ecf118559abe5fde300 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17367 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-12riscv: start to use the configstring functionsRonald G. Minnich
These functions will allow us to remove hardcodes, as long as we can verify the qemu and lowrisc targets implement the configstring correctly. Hence, for the most part, we'll start with mainboard changes first. Define a new config variable, CONFIG_RISCV_CONFIGSTRING, which has a default value that works on all existing systems but which can be changed as needed for a new SOC or mainboard. Change-Id: I7dd3f553d3e61f1c49752fb04402b134fdfdf979 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17256 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-11samsung/stumpy: fix power LED operationMatt DeVillier
commit 80EF7B7 [IT8772F: Clean up it8772f includes and add a LED API] broke power LED operation when it incorrectly transferred values from the old function (it8772f_gpio_setup) to the new one ( it8772f_gpio_led). Restore the correct values so power LED illuminates when powered on. Change-Id: I99a38351bb52063fafa7436e6397a8da7fc1e952 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17266 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-11mainboard/google/snappy: Configure PERST pinWisley Chen
Configure GPIO 122 as PERST. This is to assert WiFi PERST during s0ix entry. BUG=chrome-os-partner:59034 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: If2528632fe65c3ed1af19b2ce6f99e8be0cd1ad9 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17356 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11kblrvp: Add support for Hynix memoryNaresh G Solanki
Add support for hynix memory variant of RVP3. Change-Id: Ic1f8630b36eb131b70c5e3b620957d9602da11ee Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17339 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11mainboard/intel/kblrvp: Add support to read board ID from ECAamir Bohra
Add a function to identify an Intel RVP board by querying EC Change-Id: I21337000827639fb8f22c5ee9bc5d86f1ebe1e74 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/17283 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-11google/snappy: update timing of sdmode togglingWisley Chen
Maxim98357a speaker amp requires BCLK & SFRM to be active and stable before it is unmuted. If there is a BLCK and no SFRM, it results in a pop sound. sdmode_delay property already exists which facilitates this configuration. This patch updates "sdmode_delay" to avoid pop sound. BUG=chrome-os-partner:59034 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: Ic9095ae6812ba822c760229e69f5b27c6c244cdf Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17361 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11mainboard/google/snappy: Set PL1 override to 12000mWWisley Chen
Snappy is using APL SoC SKU's with 6W TDP max. As Reef, the energy calculation is wrong with the current VR solution. Experiments show that SoC TDP max (6W) can be reached when RAPL PL1 is set to 12W. Therefore, we've inserted 12W override after reading the fused value (6W) so that the system can reach the right performance level. BUG=chrome-os-partner:59034 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: Idd702077cd05e2b43823542cb804b2d4b42f7116 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17362 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11soc/intel/skylake: move i2c voltage config to own variableAaron Durbin
In preparation of merging the lpss i2c config structures on apollolake and skylake move the i2c voltage variable to its own field. It makes refactoring things easier, and then there's no reason for a separate SoC specific i2c config structure. BUG=chrome-os-partner:58889 Change-Id: Ibcc3cba9bac3b5779351b673bc0cc7671d127f24 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17347 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-10mainboard/google/reef: Add digitizer device to devicetreeFurquan Shaikh
BUG=chrome-os-partner:56246 BRANCH=None TEST=Verified kernel is able to talk to the device. Even without the digitizer, no issues observed with the kernel. Change-Id: I894a5f4cd8f6a51e641a2c8f7b1f682ab76712ae Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17343 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-10mainboard/google/reef: Tune digitizer I2C frequency to 400kHzFurquan Shaikh
This brings the I2C frequency down to 400kHz which is spec for fast I2C. BUG=chrome-os-partner:56246 BRANCH=None TEST=Verified frequency in kernel. Change-Id: Ib83c57eec8644903cb9c4b2ab50c94038eb690c1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17342 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10drivers/i2c/wacom: Make the driver more genericFurquan Shaikh
Wacom I2C driver can be used by devices other than touchscreen. e.g. digitizer. So there is no need to name the driver with touchscreen specific attributes. Only a separate descriptor name is required that needs to be set by mainboard correctly. BUG=chrome-os-partner:56246 BRANCH=None TEST=Compiles successfully. Change-Id: I0d32a4adae477373b3f4c5f3abbe188860701194 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17341 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10intel/kblrvp: Program I/O expanderNaresh G Solanki
Program I/O expander connected on I2C bus 4 Change-Id: I1a431f50e7b06446399a7d7cb9490615818147e7 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17338 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/thomson/ip1000: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/thomson/ip1000. Change-Id: Id7b979d2539d4a80609a60464527939c4d449822 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17308 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/supermicro/h8qme_fam10: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/supermicro/h8qme_fam10. Change-Id: Ia03c205ce498eadf8a34749a6a21fb2d0b29c840 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17306 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/supermicro/h8qgi: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/supermicro/h8qgi. Change-Id: I6cf123272283edbf89e854e4aa1a15a2d566133e Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17305 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/roda/rk9: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/roda/rk9. Change-Id: I56fec2a2814ee4b91b11f71dbdca1271792cd0e5 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17302 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/roda/rk886ex: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/roda/rk886ex. Change-Id: I2e88adc444dbbde7a4344829d7bd5a6c9e1f7531 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17301 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/rca/rm4100: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/rcs/rm4100. Change-Id: I8b242eefe796cd93337177fc694ea42c57c53f08 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17300 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/google/pyro: Set PL1 override to 12000mWKevin Chiu
Pyro is using APL SoC SKU's with 6W TDP max. As Reef, the energy calculation is wrong with the current VR solution. Experiments show that SoC TDP max (6W) can be reached when RAPL PL1 is set to 12W. Therefore, we've inserted 12W override after reading the fused value (6W) so that the system can reach the right performance level. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: I6de22d7b2d107f3d26ecfadd4e0904e68318e656 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17335 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10google/pyro: Tune i2c frequency to 400 KhzKevin Chiu
tune i2c devices clk for pyro: I2C0: audio da7219 I2C2: TPM H1 I2C3: wacom touchscreen I2C4: elan touchpad BUG=chrome-os-partner:58881 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: If3c92ed260277c27a94d2fcf7883e9441519e40e Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17331 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10google/pyro: update timing of sdmode togglingKevin Chiu
Maxim98357a speaker amp requires BCLK & SFRM to be active and stable before it is unmuted. If there is a BLCK and no SFRM, it results in a pop sound. sdmode_delay property already exists which facilitates this configuration. This patch updates "sdmode_delay" to avoid pop sound. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: I5aee41957c9de7a05f962d3ede74efc6998a78fc Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17336 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10mainboard/google/pyro: Configure PERST pinKevin Chiu
Configure GPIO 122 as PERST. This is to assert WiFi PERST during s0ix entry. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: Id760251a1b037feb62ec43199a145e407b074769 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17334 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10mainboard/kontron/ktqm77: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/kontron/ktqm77. Change-Id: I47763d1e2bfeee6366ce24b20d874adf7c6f65be Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17299 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-10mainboard/google/reef: Add support for RECOVERY_MRC_CACHEFurquan Shaikh
1. Add RECOVERY_MRC_CACHE region to reef FMAP. 2. Implement helper function for getting event for recovery mode with memory retraining. 3. Select HAS_RECOVERY_MRC_CACHE. BUG=chrome-os-partner:59352 BRANCH=None TEST=Verified recovery mode behavior with and without memory training request on reef. Change-Id: I91abc9f8122f1aa3980c6372ab557e56a7a92730 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17243 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10mainboard/kontron/986lcd-m: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/kontron/986lcd-m. Change-Id: Ib47a4bb3580cb72ee51fb06c6faa6d2d1bd3a80c Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17298 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09mainboard/jetway/j7f2: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/jetway/j7f2. Change-Id: I37f59f74ac22fbf6e036cdb0515301e8dec400fb Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17296 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09mainboard/iei/pm-lx2-800-r10: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/iei/pm-lx2-800-r10. Change-Id: I60e5b84141aa4998427c3ecaadf8fce1654b8210 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17295 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09mainboard/ibase/mb899: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/ibase/mb899. Change-Id: Id5b460090db58e91b2c210d8633a69114a9c7f6b Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17294 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09mainboard/getac/p470: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/getac/p470. Change-Id: Ifb81976ed7068f9d51edb0d297cd4a12265c51ec Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17293 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09mainboard/roda: Use C89 comments style & remove commented codeElyes HAOUAS
Change-Id: I4ce2705a8a07d0388bbdb459b63b59fc10a3aa39 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16929 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09mainboard/google/reef: use common google smbios mainboard versionAaron Durbin
BUG=chromium:663243 Change-Id: Ic78a6aac11a8e842911245c59e8ced7ed2c4e27a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17291 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-09google/pyro: Update WACOM touchscreen ACPI _HIDJanice Li
WACOM request to add a new identifier `WCOMNTN2`, and use that for the board Pyro with all LCD combinations. BRANCH=master BUG=chrome-os-partner:58093 TEST=emerge-pyro vboot_reference coreboot chromeos-bootimage Signed-off-by: Janice Li <janice.li@quantatw.com> Change-Id: I95cf357efba958d7e864d2736d324e0aad70e307 Reviewed-on: https://review.coreboot.org/17257 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-08mb/lenovo/t400: use socket mPGA478MN instead of BGA945Arthur Heymans
The T400 features a socket P (mPGA478MN) and could potentially support model_6fx CPUs. Change-Id: I24f3356aa213c29011953daed31f46404e7a4d9d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17155 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-08mb/gigabyte/ga-945gcm-s2l: add mainboardArthur Heymans
Startpoint was Intel d945gclf, which has same chipset and Gigabyte ga-g41m-es2l which has same Superio. What works and is tested: * PCI slot; * PCIe x16 slot with GPU (RADEON HD 2600 XT) and ADD2 DVI card; * onboard VGA output (only textmode implemented) with native graphic init; * 533, 800, 1067MHz FSB CPU (1333MHz is unsupported by the chipset); * serial output during and after boot. What does not work: * resume from suspend (does not work for d945gclf either). Quirks: * The Realtek ethernet card requires a reset which currently also hardcodes a MAC adress. This board was only tested with the SeaBIOS payload due to flash size constraints (512KB) and with GNU/Linux. Change-Id: I0ff9f193105facc1b276a791790e27eb4c275085 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17033 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-08intel/kblrvp: Update mainboard configurationNaresh G Solanki
Update devicetree.cb as per RVP3 mainboard. * Enable & configure PCIE ports, * Enable & configure USB ports, * Enable SSIC for WWAN, * Disable unused I2C ports, * Disable deep S5, * Disable HDA, * Update VR config, Updated gpio.h to disable pull down for SoC power button. Change-Id: I235a1d44dabef16ded2aaad13aef36ca57f37c8e Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17247 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-07mainboard/intel/kblrvp: Remove unused code in dptf.aslNaresh G Solanki
Remove unused code from dptf.asl Change-Id: Icaa675fd1052367457d6e50d51d567e7db02fd42 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17249 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07mainboard/intel/kblrvp: Configure usb over current pin & cdclockNaresh G Solanki
Configure overcurrent pins for various usb ports. Configure CdClock to 3. Change-Id: I57f1feb7e03c5bc7b125ea7e0735481fee91b6f6 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17251 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07mainboard/intel/kblrvp: Enable Build with ChromeOSNaresh G Solanki
Enable building with ChromeOS support. Change-Id: I9fbb7422be205b304253478a70e334a63afab71f Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17250 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07mainboard/intel/kblrvp: Add Chrome EC switchNaresh G Solanki
Add Chrome EC switch to enable building with/without Chrome EC. Change-Id: Iaa8102cba0a454a24149d29f044a2284cd29e28b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17248 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07intel/kunimitsu: Update DPTF settingsSumeet Pawnikar
After tuning the temperature values for optimal performance, this patch updates few DPTF settings for Kunimitsu board. BUG=None BRANCH=None TEST=Built and booted on Kunimitsu boards. Verified these updated DPTF settings with different workloads. Change-Id: Ic1c319262d80cc5cb29a8630af213822308f8bed Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://chromium-review.googlesource.com/350223 Reviewed-on: https://review.coreboot.org/17069 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-07google/lars: Update DPTF settingsSumeet Pawnikar
After tuning the temperature values for optimal performance, this patch updates few DPTF settings for lars boards. BUG=chrome-os-partner:51025 BRANCH=firmware-glados-7820.B TEST=Built and booted on lars DVT boards. Verified these updated DPTF settings with different workloads. Change-Id: I4c040526c31c3263ed3a9b4cccff3b7a021cfcdb Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://chromium-review.googlesource.com/338877 Reviewed-on: https://review.coreboot.org/17068 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-07mainboard/google/reef: update DMIC related pins configurationSathyanarayana Nujella
CLK_B1(GPIO_80) and DATA_2(GPIO_83) pins needs to be configured as native mode to use them for DMIC record on other potential DMIC's. DMIC blobs configure the clocks. For stereo & quad channel record, both CLK_A1 and CLK_B1 are enabled. For mono channel record, only CLK_A1 is enabled. BUG=chrome-os-partner:56918 BRANCH=None TEST=During DMIC record, check CLK_B1 and DATA_2 lines Change-Id: I838009b85190de5360d593238e48c9593c1dc43a Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17199 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-07riscv: Unify SBI call implementations under arch/riscv/Jonathan Neuschäfer
Note that currently, traps are only handled by the trap handler installed in the bootblock. The romstage and ramstage don't override it. TEST=Booted emulation/spike-qemu and lowrisc/nexys4ddr with a linux payload. It worked as much as before (Linux didn't boot, but it made some successful SBI calls) Change-Id: Icce96ab3f41ae0f34bd86e30f9ff17c30317854e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17057 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-07mb/lowrisc/nexys4ddr: Actually fix the UART clock setupJonathan Neuschäfer
Ron's code calculated the DLL and DLM registers of the 8250 UART, but that's the job of the UART driver. uart_input_clock_divider isn't needed anymore because the default value of 16 works. As a bonus, the baud rate can now be selected in Kconfig, instead of being hardcoded at 115200. TEST=Booted the board at 9600 and 115200 baud. Change-Id: I3d5e49568b798a6a6d944db1161def7d0a2d3b48 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17188 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-04reef: tune trackpad i2c frequency to 400kHzAaron Durbin
This brings the frequency down to 400kHz which is spec for fast i2c. BUG=chrome-os-partner:58889 Change-Id: Ibc5f152e55ed618f18ac6425264f086b1f2d1ffa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17215 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-04reef: tune tpm i2c frequency to 400kHzAaron Durbin
This brings the frequency down to 400kHz which is spec for fast i2c. BUG=chrome-os-partner:58889 Change-Id: I8689a062b5457aa431eaa7fb688a7170dad83fcf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17214 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-03mainboard/intel/kblrvp: Update onboard memory specific configsNaresh G Solanki
1. Update dq, dqs map & Rcomp strength & Rcomp target. 2. Fix rvp3.spd.hex byte 2 to 0x0F(JEDEC LPDDR3 memory type). Change-Id: I7efc3499b915d1e414cfe914830232993ef10ba2 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17162 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2016-11-03mainboard/intel/kblrvp: Update gpio.h, spd.h & mainboard.cNaresh G Solanki
1. Update gpio.h to set proper pad config for Kaby Lake RVP3. 2. Set spd index to zero. 3. Remove nhlt specific init. Change-Id: I41a312d92acd2c111465a5e8f1771158e3f33e2b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17161 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-03google/veyron*: change .ddrconfig from 14 to 3ZhengShunQian
There are two configs, sdram-lpddr3-hynix-2GB.inc and sdram-lpddr3-samsung-2GB-24EB.inc that use .ddrconfig = 14. Changing .ddrconfig from 14 to 3 improves performance especially on contiguous memory accesses. Comparing the .ddrconfig: - if .ddrconfig = 3, C RDRR RRRR RRRR RRRR RBBB CCCC CCCC C--- - if .ddrconfig = 14, C DRBB BRRR RRRR RRRR RRRR CCCC CCCC C--- where - R: indicates Row bits - B: indicates Bank bits - C: indicates Column bits - D: indicates Chip selects bits .ddrconfig = 3 has multiple banks switching which improves DDR timing. BUG=chrome-os-partner:57321 TEST=Boot from fievel and play video BRANCH=veyron Change-Id: Ifdcedc28e84429b8b79c7553b38b667631d29c09 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 93882e4f2000d93c9dae5e6d4b2e1f4b7bc9489e Original-Change-Id: Ic98ebae48609a7604ec678b6bd14dd2b29b669c4 Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/404691 Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17210 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-03google/veyron*: add DDR configs for new samsung DDRZhengShunQian
Add the new samsung DDR configs for all veyron except veyron_rialto: * K4E6E304EB-EGCE, ramid = 0010, 4GB * K4E8E324EB-EGCF, ramid = 1100, 2GB BRANCH=veyron BUG=none TEST=boot fievel board Change-Id: I747aa86f8c93174651a28face63b3386e22b23b3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5f55462e71bd481eda85af3d582cfe5b9873cc9c Original-Change-Id: I19123634c994f685683323f7d85cc4d35814e2ab Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/345748 Original-Commit-Queue: Ren Kuo <ren.kuo@quantatw.com> Original-Reviewed-by: Philip Chen <philipchen@chromium.org> Original-(cherry-pick from cc990f27024255a326fd9fa9644deb28b01a31a7) Original-Reviewed-on: https://chromium-review.googlesource.com/404690 Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17209 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: display: Do not allocate framebuffer in corebootLin Huang
framebuffer address is dynamically chosen by libpayload now, so there's no need to configure it in coreboot. CQ-DEPEND=CL:401402 BUG=chrome-os-partner:58675 BRANCH=none TEST=Boot from kevin, dev screen is visible Change-Id: I9f1e581d5c63b3579b26be22ce5c8d1e71679f6f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b3b6675420592c30e1e0abc8f8e9dd6ed5abd04c Original-Change-Id: I7e3162f24a4dc426fe4e10d74865cf0042c80db5 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/401401 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17109 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: sdram: also prepare the index1 configurationLin Huang
To enable DDR Dynamic Voltage and Frequency Scaling (DVFS) we need to train alternative configurations first, so do the training and store the values. BUG=None BRANCH=None TEST=Boot from kevin Change-Id: I944a4b297a4ed6966893aa09553da88171307a42 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94533ff3ba21bcb0ace00bedcf0cebb89a341be2 Original-Change-Id: I4a98bc0db5553d154fedb657e35b926a92aa80c7 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/386596 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17104 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-01google/eve: Add new boardDuncan Laurie
Add the eve board files using kabylake and FSP 2.0. BUG=chrome-os-partner:58666 TEST=build and boot on eve board Change-Id: I7ca71fe052608d710ee65d078df7af7b55d382bc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17177 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-10-28riscv: add the lowrisc/nexys4ddr mainboardRonald G. Minnich
This was tested at the coreboot meeting in Berlin. The uart programming may still not be right but when used with the lowrisc bitstream for the board we were able to load and start linux, although it does not yet get far due to PTE version issues with lowrisc. Change-Id: Ia1de1a92762631c9d7bb3d41b04f95296144caa3 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17132 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-28lars/kunimitsu: Add other sensor in _ART for fan controlSumeet Pawnikar
This patch updates the _ART table with other external sensor TSR0 for Fan speed control on Skylake-U based Kunimitsu and Lars boards. Also, updates the temperature values in DPTF policy for better performance. BUG=chrome-os-partner:51025 BRANCH=firmware-glados-7820.B TEST=Built and booted on kunimitsu and lars EVT boards. Verified this updated _ART table on these boards with different workloads. Change-Id: Ib195910c5eb00e004e8b9bd50e266ade3c175be2 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://chromium-review.googlesource.com/332349 Reviewed-on: https://review.coreboot.org/17066 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-28mainboard/google/reef: allow variants to override NHLT OEM stringsAaron Durbin
In certain cases a board variant may need to override the NHLT OEM strings in the main NHLT table. Therefore, provide that path. BUG=chrome-os-partner:56918 Change-Id: I57cc4fd3665698e41ceebb1949180f86bb60b61f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17167 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
2016-10-28mainboard/google/reef: update comment for DMIC config usageAaron Durbin
Going forward GPIO_17 is used to determine the configuration of the board w.r.t. the number of DMICs on the board. BUG=chrome-os-partner:56918 Change-Id: I03edb880e0649977030c1b87219ebebac631a519 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17163 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-28pcengines/apu1: Add RS485 configurationKyösti Mälkki
In RS485 mode RTS line acts as a transceiver direction control. The datasheet is not very clear about the polarity but register setting here is tested to drive nRTS line high when transmitting. Also note revision of B of the super-IO has errata and 8N1 setting does not work properly, you would need revision C of the chip assembled to fix this. Change-Id: I705fe0c5a5f8369b0a9358a64c74500238b5c4ba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14998 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-10-27mainboard/google/reef: drop disabling periodic training for micronAaron Durbin
In anticipation of getting fixed material remove the disabling of periodic training for MT53B512M32D2NP and MT53B256M32D1NP. BUG=chrome-os-partner:59003 Change-Id: Iaadaa979d85cab78dda527db7480420af02fd832 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17130 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-27mainboard/google/reef: clarify memory part number detailsAaron Durbin
Explain the reasoning for the part_num strings used in the memory SKU table explaining the necessity of keeping mosys in sync with the strings used. It's possible that actual part numbers could change as the higher speed material gets cheaper, for example. BUG=chrome-os-partner:58966 Change-Id: If895e52791dc56e283261b3438106116b8b2ea05 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17129 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27skylake: Use COMMON_FADTDuncan Laurie
Remove the FADT from the individual mainboards and select and use COMMON_FADT in the SOC instead. Set the ACPI revision to 5. Change-Id: Ieb87c467c71bc125f80c7d941486c2fbc9cd4020 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17138 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-26google/reef/variants/pyro: Use WCOM Touchscreen driverFurquan Shaikh
BUG=chrome-os-partner:57846 Change-Id: Ibd3ef8cebcf99ee2186dfed98b04373dd17e798e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17093 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-10-26nb/gm45/gma.c: Remove writes to DP, FDI registersArthur Heymans
Those registers are only used on more recent Intel platforms featuring a PCH. The DP registers on G4X hardware are at a different offset. Change-Id: Ib49e54d4e7d6595dc09fb1be35ac8178b80c7f71 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17110 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-25mb/ga-g41m-es2l: remove unneeded IGD IRQ setting in ACPIArthur Heymans
According to: "Intel ® 4 Series Chipset Family datasheet" the IGD only has 1 IRQ pin. Change-Id: I974f002f5a213056f4593a1eab10772527bb241d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17098 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-25mainboard/intel/kblrvp: Initial commit for Intel Kaby Lake RVP3Naresh G Solanki
Add support for Kaby Lake RVP3. Use kunimitsu at commit 028200f as base. Kabylake RVP3 is based on Kabylake-Y with onboard Dual Channel LPDDR3 DIMM. * Update board name to kblrvp * Remove fsp 1.1 specific code( As Kabylake uses fsp2.0) * Remove board id function. * Remove unused spd & add rvp3 spd file. This is an initial commit does not have full support to boot. Will add more CLs to boot Chrome OS with depthcharge. Change-Id: Id8e32c5b93fc32ba84278c5c5da8f8e30c201bea Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17032 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25google/oak: Add derivative board HanaYidi Lin
CQ-DEPEND=CL:379684 BUG=chrome-os-partner:58064 TEST=verified on hana rev0 Change-Id: Icd076dcaf07a97f3b83b428b9619e8a4dafe744d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7c483951a0dcd419735fffb79e6187f9ca3b08a8 Original-Change-Id: I9d886abf15931496ac61e8fd38d7fd306f2a1bf7 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/379504 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Philip Chen <philipchen@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17107 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25rockchip/rk3399: gru/kevin: drop unused sdram configsLin Huang
There are some sdram configurations that are no longer used. Drop them. BUG=None BRANCH=None TEST=None Change-Id: Ib6d2d58c3071147a3095bc1ed7fa7b02c748e1a5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 111d375005ec6a3b91e47acdd676e8f1644c931c Original-Change-Id: I5f9278093f02e785b2894faa8e8cf09ecec20325 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/399122 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17103 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25rockchip/rk3399: reset system if DDR init failsLin Huang
We found sdram may fail in pctl_cfg(), so we check the status in this function. If it exceeds 100ms still in this function, we will restart the system. We also found there are rare chances DDR training fails, so also restart system in that case. BUG=chrome-os-partner:57988 BRANCH=None TEST=coreboot resets on failure and eventually the system comes up Change-Id: Icc0688da028a8f4f81eafe36bbaa79fdf2bcea74 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 89e45f8352f62e19a203316330aba14ccc5c8b11 Original-Change-Id: If4e78983abcfdfe1e0e26847448d86169e598700 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/397439 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17045 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25mb/emulation: Select QEMU-i440fx by defaultJonathan Neuschäfer
It's a better default than QEMU-armv7, which is currently the default board when coreboot is configured for the first time, because most coreboot development targets x86. With this patch, the minimal steps to coreboot+SeaBIOS booting in QEMU become: git clone https://review.coreboot.org/coreboot.git && cd coreboot make crossgcc-x86 make olddefconfig && make qemu-system-x86_64 -bios build/coreboot.rom Change-Id: Ie44a5d95547a55df93f29082c3b5a86fb83aa1e7 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16987 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-10-25mainboard/google/reef: Add PowerResource for ELAN touchscreenFurquan Shaikh
Define reset_gpio and enable_gpio for touchscreen device so that when kernel puts this device into D3, we put the device into reset. PowerResource _ON and _OFF routines are used to put the device into D0 and D3 states. BUG=chrome-os-partner:55988 Change-Id: Ia905f9eb630cd96767b639aec74131dbd7952d0e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17083 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-24mainboard/emulation: Use C89 comments style & remove commented codeElyes HAOUAS
Change-Id: I627338505fe1273366bc8f6f528d829b3162b371 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16916 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-24mainboard/amd/tilapia_fam10: Use C89 comments style & remove commented codeElyes HAOUAS
Change-Id: I7515288190ca57a321fb8ffe57a1181b638c336a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16978 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-24mainboard/amd/serengeti_cheetah*: Use C89 comments style & remove commented codeElyes HAOUAS
Change-Id: I2fae9e02e2fccaff97f2441fd17f8960e8ab9786 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16975 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-24mainboard/amd/mahogany: Use C89 comments style & remove commented codeElyes HAOUAS
Change-Id: Ife9c0b8a1ab55fe683c88e34239d7f5806e1ff9b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16971 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-24mainboard/amd/lamar: Use C89 comments style & remove commented codeElyes HAOUAS
Change-Id: I765814450b82755f84c010f63bc8f919bb0cd4c1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16970 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-24RISCV: Clean up the common architectural codeRonald G. Minnich
This version of coreboot successfully starts a Harvey (Plan 9) kernel as a payload, entering main() with no supporting assembly code for startup. The Harvey port is not complete so it just panics but ... it gets started. We provide a standard payload function that takes a pointer argument and makes the jump from machine to supervisor mode; the days of kernels running in machine mode are over. We do some small tweaks to the virtual memory code. We temporarily disable two functions that won't work on some targets as register numbers changed between 1.7 and 1.9. Once lowrisc catches up we'll reenable them. We add the PAGETABLES to the memlayout.ld and use _pagetables in the virtual memory setup code. We now use the _stack and _estack from memlayout so we know where things are. As time goes on maybe we can kill all the magic numbers. Change-Id: I6caadfa9627fa35e31580492be01d4af908d31d9 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17058 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-21mainboard/amd/db-ft3b-lc: Use C89 comments style & remove commented codeElyes HAOUAS
Change-Id: I2a3bf53e6bc4084305238fa176ae46161da4be8f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16967 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-21mainboard/amd/bimini_fam10: Use C89 comments style & remove commented codeElyes HAOUAS
Change-Id: I4e628cbe11da32d291c4b8e4c7be91e9b0a86ad9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16966 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-21mainboard/amd/bettong: Use C89 comments style & remove commented codeElyes HAOUAS
Change-Id: I137b27ffb0e54a9ca6b0bd3a454b1d99b3e1c22b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16907 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-20kunimitsu: Add choice to select FSP driverNaresh G Solanki
Add choice to select between FSP 1.1 & FSP2.0 driver to be used. Change-Id: Ied7eab6f4a2191e0bcf220cde5ca519a3c3e2d76 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17051 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-20mainboard/google/reef: add snappy variantWisley Chen
Create the initial Snappy variant which refers to the Reef device. Snappy, an Apollolake-platform, is deviated from reference board Reef. BRANCH=master BUG=None TEST=Built & booted Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I6f32c0b1a154edbd8c4822acdbdbdbeb4a0098e6 Reviewed-on: https://review.coreboot.org/17043 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-19mb/asus/kcma-d8,kgpe-d16: use MAINBOARD_DO_NATIVE_VGA_INITArthur Heymans
MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG should only occur together with MAINBOARD_HAS_NATIVE_VGA_INIT. It seems to be used to just have to have the option to be able to select SEABIOS_VGA_COREBOOT. This patch makes these boards use MAINBOARD_DO_NATIVE_VGA_INIT and MAINBOARD_HAS_NATIVE_VGA_INIT to have it select SEABIOS_VGA_COREBOOT by default when SeaBIOS is chosen. Change-Id: If0a36af1883a3d62b16a61483733be981a85e5e2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16981 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-18mainboard/google/reef: Configure PERST pin for reef DVTVaibhav Shankar
Configure GPIO 122 as PERST on DVT. This is to assert WiFi PERST during s0ix entry. BUG=chrome-os-partner:55877 TEST=S0ix functional on DVT Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Change-Id: Iab18b2de621a1a9226c78493f6defa15081db875 Reviewed-on: https://review.coreboot.org/17030 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-16mainboard/google/reef: Set PL1 override to 12000mWVenkateswarlu Vinjamuri
Reef is using APL SoC SKU's with 6W TDP max. We've done experiments and found the energy calculation is wrong with the current VR solution. Experiments show that SoC TDP max (6W) can be reached when RAPL PL1 is set to 12W. Therefore, we've inserted 12W override after reading the fused value (6W) so that the system can reach the right performance level. BUG=chrome-os-partner:56922 TEST=webGL performance(fps) not impacted before and after S3. Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Change-Id: I21c278e82b82d805f6925f4d9c82187825fd0aa0 Reviewed-on: https://review.coreboot.org/17029 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-15riscv: Use the generic src/lib/bootblock.cJonathan Neuschäfer
TEST=Compiled for and ran on spike; it booted as before. Change-Id: Id173643a3571962406f9191db248b206235dca35 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16995 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-15riscv: Clean up {qemu,spike}_utilJonathan Neuschäfer
spike_util.h: - (LOG_)REGBYTES and STORE are already defined in arch/riscv/include/bits.h. - TOHOST_CMD, FROMHOST_* are helper macros for the deprecated Host-Target Interface (HTIF). qemu_util.c: - mcall_query_memory now uses mprv_write_ulong instead of first translating the address and then accessing it normally. Thus, translate_address isn't used anymore. - Several functions used the deprecated HTIF CSRs mtohost/mfromhost. They have mostly been replaced by stub implementations. - htif_interrupt and testPrint were unused and have been deleted. spike_util.c: - translate_address and testPrint were unused and have been deleted. After this commit, spike_util.c and qemu_util.c are exactly the same and can be moved to a common location. Change-Id: I1789bad8bbab964c3f2f0480de8d97588c68ceaf Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16985 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-10-15riscv and power8: Convert printk/while(1) to dieJonathan Neuschäfer
Change-Id: I277cc9ae22cd33f2cd9ded808960349d09e8670d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16984 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-10-13x60,t60: do not add etc/ps2-keyboard-spinup for non-seabios payloadsArthur Heymans
Regardless of the payload chosen a file etc/ps2-keyboard-spinup is added to cbfs. With this fix this file is only added to cbfs when seabios is choses as a payload. Change-Id: I37cf4c998856db2d297356776752643dba46a8f8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16146 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-10-11lenovo/x60: CST table: use MWAIT requests instead of P_LVLx I/O readsArthur Heymans
Requesting low power acpi cpu c-states has two software interfaces: Using P_LVLx I/O reads or using equivalent MWAIT requests. This change makes it more consistent with newer targets that use MWAIT requests. There also exists extended intel acpi c-states which can be enabled in two ways: - using a substate hint to the mwait request (defined in bios); - setting a model specific register (msr) Currently this is done by setting the right msr bits but with this change one can experiment by adding substate hints. Change-Id: I9eeb5b008e2ddc2193725667f2c13582a4877e3c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/14801 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-11mainboard/apple: Use C89 comments style & remove commented codeElyes HAOUAS
Change-Id: I81c32c618627507cc3a83f60f565a73e5e6d7a13 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16913 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-11mainboard/aopen: Use C89 comments style & remove commented codeElyes HAOUAS
Change-Id: I0014fc030888d71f7951c97bccc7cef0e1c45186 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16922 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>