summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2021-10-28mb/google/guybrush/var/nipperkin: update telemetry settingsKevin Chiu
Currently, the AMD SDLE stardust test fails with incorrect VDD/SOC scale/offset value, it needs to update the two load line slope settings for the telemetry. AGESA sends these values to the SMU, which accepts them as units of current. Proper calibration is determined by the AMD SDLE tool and the Stardust test. VDD scale: 92165 -> 73457 VDD offset: 412 -> 291 SOC scale: 30233 -> 30761 SOC offset: 457 -> 834 BUG=b:200194315 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage pass AMD SDLE/Stardust test Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: If53c173000a276a80247ccb08736280a25948939 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-27mb/google/guybrush: Move EN_PWR_FP from GPIO_32 to GPIO_3Rob Barnes
EN_PWR_FP is used to enable power to the FPMCU. This frees up GPIO_32 for other uses. This move applies to all board except: * Guybrush * Nipperkin board version 1 Add callbacks for variants to override fpmcu shtudown gpio table and fpmcu disable gpio table. BUG=b:202992077 TEST=Build and boot to OS in Guybrush and Nipperkin. Ensure fingerprint still works. Change-Id: I4501554da0fab0cb35684735e7d1da6f20e255eb Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27mb/google/guybrush: Move GSC_SOC_INT_L from GPIO_3 to GPIO_85Karthikeyan Ramasubramanian
GSC_SOC_INT_L gpio is used by Google Security Chip (GSC) to interrupt SoC when the SoC is in S0 state. Hence use GPIO_85 which is in S0 domain and save the GPIO_3 in S5 domain for other use-cases. This move applies to all board except: * Guybrush * Nipperkin board version 1 Update the GPIO configuration, device tree configuration accordingly. BUG=b:202992077 TEST=Build and boot to OS in Guybrush and Nipperkin. Ensure that the SoC <-> TPM communication is working fine. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I019f10f2f457ab81bcff77ce8ca609b2b40cb2ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/58638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27mb/google/guybrush: Fix GPIO overrides during verstageKarthikeyan Ramasubramanian
GPIO overrides are defined for verstage. But the overrides are neither enabled nor applied during verstage. Enable the overrides and apply them during verstage. BUG=None TEST=Build and boot to OS in Guybrush. Perform suspend/stress, warm and cold reboot cycling for 10 iterations each. Ensure that all the PCIe devices are enumerated fine. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I510313bf860d8d55ec3b04a9cfdfa942373163f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27mb/google/brya/var/gimble: disabled autonomous GPIO power managementMark Hsieh
Used H1 firmware where the last version number is 0.0.22, 0.3.22 or less to production that will need to disable autonomous GPIO power management and then can get H1 version by gsctool -a -f -M BUG=b:200918380 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I83cc1a5d80bf23d052e83c9791ef866966a3d9b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58626 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-27mb/google/dedede/var/lantis: Generate new SPD ID for new memory partsWisley Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:204015941 TEST=run part_id_gen to generate SPD id Change-Id: I78ec575d354a5ae7c014a6050364d0a5214e4e92 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com>
2021-10-27mb/google/dedede/var/driblee: Generate new SPD ID for new memory partsFrank Wu
Add new memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: 1. K4U6E3S4AB-MGCL 2. H54G46CYRBX267 BUG=b:204023388 BRANCH=firmware-keeby-14119.B TEST=FW_NAME=driblee emerge-keeby coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I1b40e24faf8d85f32839a3d44fd936ca7ee7e09f Reviewed-on: https://review.coreboot.org/c/coreboot/+/58572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-27mb/google/guybrush: Remove WWAN_DISABLE GPIOKarthikeyan Ramasubramanian
In-band controls work to enable/disable the WWAN module. Hence WWAN_DISABLE_GPIO is not critical and can be marked as not connected. BUG=b:188415287 TEST=Build and boot to OS in Guybrush. Ensure that the WWAN module is enumerated on boot and reboot. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I7fefba3de9c749971911b21ed4712e950cef5a6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-27mb/google/guybrush: Update SD_AUX_RESET_L signalKarthikeyan Ramasubramanian
On all upcoming variants and board versions of existing variants, SD_AUX_RESET_L signal moves from GPIO_69 to GPIO_5. This means all boards except: * All board versions of Guybrush * Nipperkin Board Version 1. Also in Nipperkin, LCD_PRIVACY_PCH signal moves from GPIO_5 to GPIO_18. Configure the gpios accordingly in baseboard, guybrush and nipperkin variants accordingly. Also update the DXIO port descriptor for SD PCIe engine with the corresponding AUX reset GPIO. BUG=b:202992077 TEST=Build and boot to OS in Guybrush & Nipperkin. Ensure that the SD Controller and SD Card are enumerated fine. Ensure that the enumeration is successful after a suspend/resume cycle. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: If28810747e6b4eaae2a693a98e1adc830f80bcf6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-27mb/google/brya/var/kano: Disable unused PCIE root port in devicetreeDavid Wu
The baseboard enables PCIe RPs 6, 8 and 9, but kano doesn't use these. Having them enabled will occasionally cause suspend attempts to fail, therefore disable them in the overridetree. BUG=b:203389490 b:192370253 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ie2b82cff6d910c961eeb56704dcbae2bdc2a8c53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/guybrush: Reconfigure GPIO_5Karthikeyan Ramasubramanian
On Guybrush, pen is stuffed and GPIO_5 is used to enable Pen power. On Nipperkin board version 1, pen is not stuffed and instead the GPIO is used to control LCD Privacy settings. On upcoming Nipperkin board versions and other variants, GPIO_5 is not used. Configure GPIO_5 accordingly. BUG=b:202992077 TEST=Build and boot to OS in Guybrush. Ensure that the configuration is retained on existing boards. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I2aa2f16282b91f157701212ee27ddd2e89918767 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-27mb/siemens/chili: Drop redundant Kconfig selectAngel Pons
The `SMBIOS_PROVIDED_BY_MOBO` Kconfig option is already selected through the `SECUNET_DMI` option. So, there's no need to select both of them. Change-Id: I784df87893043a011906af8808aff27d636c7626 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58625 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-27mb/google/dedede/var/drawcia: Generate new SPD ID for new memory partsWisley Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:204014463 TEST=run part_id_gen to generate SPD id Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I43df98d84c6a274d6f96c8818ce6acff9337d8d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-27mb/google/dedede/var/haboki: Generate new SPD ID for new memory partsWisley Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Micron MT53E512M32D1NP-046 WT:B Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:204015944 TEST=run part_id_gen to generate SPD id Change-Id: Icf2f7352a4bd6a58e3e7abdcaac823b863984732 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-27mb/google/brask: Correct GPIO GPP_R6 and GPP_R7 settingDavid Wu
Correct GPIO GPP_R6 and GPP_R7 setting to NF2 (DMIC_CLK1 and DMIC_DATA1). BUG=b:197385770 TEST=emerge-brask coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia3813306f8c7b69fe5cf0e188c55256b68d329ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/58578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/brya/var/kano: Update the FIVR configurationsDavid Wu
This patch set disables the external voltage rails since kano board doesn't have V1p05 and Vnn bypass rails implemented. BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia1f3f4b2ada0154c716aedd521d4151124411ba3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/guybrush/var/nipperkin: config eSPI alert as in-bandKevin Chiu
To prevent unexpected alert from eSPI to SOC, configure this alert pin to in-band. BUG=b:199458949,b:203446084 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I18d38fe504bd9f2069b9977d5a35729691f672d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-27mb/google/guybrush/var/nipperkin: Add G2 GTCH7503 HID TS supportKevin Chiu
Follow up the G2 spec: G7500_Datasheet_Ver.1.2 BUG=b:203607764,b:202090378 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage TS is functional Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I98dd3095043ab537d91e81b84944779240b203ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/58564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-26intel/adlrvp: Add sub-regions to SI_ME in chromeos.fmdFurquan Shaikh
This change adds sub-regions to SI_ME in chromeos.fmd. These are required to support stitching of CSE components. BUG=b:189177538 Change-Id: Ife48aafcec43555175aad44f8b6307beeaea9184 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58592 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-26mb/google/dedede/var/blipper: Add fw_config probe for multi audio codecYongkun Yu
Compatible headphone codec "Realtek ALC5682I-VD" and "ALC5682I-VS" BUG=b:197694580 BRANCH=dedede TEST=ALC5682I-VD or VS audio codec can work normally Signed-off-by: Yongkun Yu <yuyongkun@huaqin.corp-partner.google.com> Change-Id: I422f206b8f1f3705a65808041f1a1544c461b431 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-26mb/prodrive/hermes: Remove overridetreeAngel Pons
There's no need to have an overridetree with a single board variant. TEST=Compare static.c and observe only device order has changed. Change-Id: I2097e247c27d5d0c5479cb533b477cd490a4c827 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-26mb/prodrive/hermes: Reorganize per-port PCIe settingsAngel Pons
Move per-port PCIe settings inside the corresponding PCIe root port device. Also, remove several unnecessary and/or redundant comments. Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical. Change-Id: I3f64d56b3b2c592194b18ae7b7c63ef41a1e060f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-25mb/google/guybrush/var/nipperkin: override dxio to turn off WLAN ASPM L1.2/L1.2Kevin Chiu
turn off WLAN ASPM L1.1/L1.2 as a short-term w/a for WLAN AP probe failure. BUG=b:198258604 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage AP is able to be probed by wlan module Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Ic7be523626b0ff6e4b1c66ba6af13b15061ef4cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-25mb/google/brya/variants/gimble: Enable Bluetooth offload supportMac Chiang
Enable CnviBtAudioOffload UPD BUG=b:199180746 TEST=emerge-byra coreboot Signed-off-by: Mac Chiang <mac.chiang@intel.com> Change-Id: Ic507b1d0f7c2f38de8d24247cd677b897a7463f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-22AGESA binaryPI: Use common acpi_fill_madt()Kyösti Mälkki
Change-Id: I01ee0ba99eca6ad4c01848ab133166f8c922684d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-22arch/x86/ioapic: Select IOAPIC with SMPKyösti Mälkki
For coreboot proper, I/O APIC programming is not really required, except for the APIC ID field. We generally do not guard the related set_ioapic_id() or setup_ioapic() calls with CONFIG(IOAPIC). In practice it's something one cannot leave unselected, but maintain the Kconfig for the time being. Change-Id: I6e83efafcf6e81d1dfd433fab1e89024d984cc1f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22mb/emulation/qemu-i440fx: Select IOAPICKyösti Mälkki
For SMP operation IOAPIC needs to be configured. For a build with MAX_CPUS=1 emulation might still decode the IOAPIC MMIO window, it does not really matter to have it always reserved. Change-Id: Ia340fc418cd9ceda56a2a10972e130d9f289c589 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-22cpu/x86/mp_init: move printing of failure message into mp_init_with_smmFelix Held
Each CPU/SoC checks the return value of the mp_init_with_smm and prints the same error message if it wasn't successful, so move this check and printk to mp_init_with_smm. For this the original mp_init_with_smm function gets renamed to do_mp_init_with_smm and a new mp_init_with_smm function is created which then calls do_mp_init_with_smm, prints the error if it didn't return CB_SUCCESS and passes the return value of do_mp_init_with_smm to its caller. Since no CPU/SoC code handles a mp_init_with_smm failure apart from printing a message, also add a comment at the mp_init_with_smm call sites that the code might want to handle a failure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I181602723c204f3e43eb43302921adf7a88c81ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/58498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-21cpu/x86/mp_init: use cb_err as mp_init_with_smm return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of mp_init_with_smm against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibcd4a9a63cc87fe176ba885ced0f00832587d492 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21mb/google/brya/var/kano: Correct GPIO GPP_R6 and GPP_R7 settingDavid Wu
Correct GPIO GPP_R6 and GPP_R7 setting to NF2 (DMIC_CLK1 and DMIC_DATA1). BUG=b:202913826 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ibf8ff0e48c4bab435d082dee27bcd53bc85b088d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: CT Lin <ctlin0@nuvoton.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21mb/google/brya/var/brask: Correct SSD power sequenceDavid Wu
M.2 spec describes PERST# should be sequenced after power enable. BUG=b:197385770 TEST=emerge-brask coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia7e5c7b1a2194d53d98865d33cf1bc6111572876 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21mb/google/guybrush/var/nipperkin: Enable GPP2 for NVMe bridge eMMC storageKevin Chiu
BUG=b:195269555 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage eMMC sku is bootable Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: If9e0fdc1667cbaac05fdf4c6689d47a561016c9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-21mb/google/guybrush/var/nipperkin: Override GPIO configurationKarthikeyan Ramasubramanian
SOC_PEN_DETECT_ODL, SOC_SAR_INT_L and WWAN_AUX_RESET_L are not connected in nipperkin. Override those GPIO configurations. BUG=None TEST=Build and boot to OS in Nipperkin. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I7e497f83593472ecf4927e5379e1dd7786e77e62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
2021-10-21mb/google/guybrush: Add PCIe Reset GPIO18 to PCIE WWAN DXIO DescriptorKarthikeyan Ramasubramanian
WWAN_AUX_RST_L is asserted during S0i3 entry. But it needs to be de-asserted before PCIe link training during S0i3 resume. Otherwise the concerned gpp_bridge_2 PCIe device is not enumerated on Soi3 resume. This change feeds in the WWAN_AUX_RST_L GPIO in the DXIO descriptor so that SMU de-asserts this reset on S0i3 resume. BUG=b:199780346 TEST=Build and boot to OS in Guybrush. Perform suspend/resume cycles for 500 iterations. Ensure that the PCIe devices enumerate fine. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I588c490bf3f8a7beffefc3bfd8ca5167fcbcb9a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-21mb/google/guybrush: Make DXIO Port Descriptor configurableKarthikeyan Ramasubramanian
Instead of a const port descriptor, make it configurable. This will help to avoid adding duplicate tables for every minor configuration updates. BUG=None TEST=Build and boot to OS in Guybrush. Perform suspend/resume, warm and cold reboot cycles for 10 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: If616a08ba54fddab25e5d0d860327255dfd43cbe Reviewed-on: https://review.coreboot.org/c/coreboot/+/58378 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-21mb/google/brya/var/kano: Enable BT offload supportDavid Wu
Enable the CnviBtAudioOffload UPD and program the corresponding BT VPGIOs. BUG=b:202913826 TEST=emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Id81cba82742f552c098ec3719a0b453b752dc5c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21mb/google/trogdor: determine which panel to use by panel_id for quackingstickSheng-Liang Pan
panel_id 6 for AUO B101UAN08.3. BUG=b:201263032 BRANCH=none TEST=make Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I076ded9300c2ec1704a566722870bd0d1a20e9d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58363 Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-21mb/google/dedede/var/bugzzy: Add LTE power off sequenceSeunghwan Kim
This change adds LTE power off sequence for bugzzy. BUG=None BRANCH=dedede TEST=FW_NAME=bugzzy emerge-dedede coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I6be0e23b9c2c2bed9745011920394006fdaabae6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-21mb/google/dedede/var/bugzzy: Enable/disable LTE function based on FW_CONFIGSeunghwan Kim
Enable/disable LTE function based on DB_PORTS field of FW_CONFIG. - GPIO control - USB port setting BUG=None BRANCH=dedede TEST=FW_NAME=bugzzy emerge-dedede coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I8363f8e7052ff9cfa423063a7e8f5a0f9ce1df2c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-20google/trogdor: Support Parade ps8640Philip Chen
Support Parade ps8640 as the second source edp bridge for some trogdor board variants/revisions. BUG=b:194741013 BRANCH=trogdor TEST=verified firmware screen works on lazor rev9 Change-Id: Iae5ccd8d9d33d60e4c37011ecffdd7a05af59ab2 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-10-20mb/google/brya/var/redrix: Enable bt_offload supportMac Chiang
Enable CnviBtAudioOffload UPD and program the corresponding VGPIO pins BUG=b:191931762 TEST=emerge-coreboot Signed-off-by: Mac Chiang <mac.chiang@intel.com> Change-Id: I81bae537d52592e878db56343970de6fc488950f Reviewed-on: https://review.coreboot.org/c/coreboot/+/58288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-20mb/intel/adlrvp: Rework KconfigFelix Singer
Rework Kconfig file that each variant has its own config option with their specific selects / configuration and move common selects to `BOARD_INTEL_ADLRVP_COMMON`, which is used as base for each variant. Also, move selects from Kconfig.name to Kconfig that the configuration is at one place and not distributed over two files. Built each variant with `BUILD_TIMELESS=1` and all generated coreboot.rom files remain identical. Excluded the .config file by disabling `INCLUDE_CONFIG_FILE` to make this reproducible. Change-Id: If68c118f22579cc0a3db570119798f0f535f9804 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56221 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-20mb/intel/adlrvp_m: Enable touchpadBernardo Perez Priego
These changes include ELAN touchpad to ACPI tables and configure GPIO's. BUG=None Test=Boot board, touchpad should be functional Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I78e5e133f7d3af47395819a79638a90fee4fd19e Reviewed-on: https://review.coreboot.org/c/coreboot/+/57863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-10-20mb/intel/adlrvp: Remove EC regionBernardo Perez Priego
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Ic76c29069beb510dd7620f340e0aab212668c3f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-10-20mb/google/brya/anahera: Add two thermal sensor settingWisley Chen
Anahera has 4 thermal sensors, so add the missing sensors settings. BUG=b:203187535 TEST=build and verified by thermal team. Change-Id: I0e5c0d9c09c88cc95fdfd77b96800a0f4929d7d2 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-20mb/google/brya/anahera: Update HID to MX98360AWisley Chen
Because of a change in the chromium OS kernel machine driver for the MAX98357A, a _HID that matches MAX98360A has to be used. (https://chromium- review.googlesource.com/c/chromiumos/third_party/kernel/+/3070268/) BUG=b:200778066 TEST=FW_NAME=anahera emerge-brya coreboot Change-Id: Ic68373920d9135e614ff792149079de451ec6e60 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-20mb/google/taeko: enable DPTF functionality for taekoKevin Chang
Enable DPTF functionality for taeko BRANCH=None BUG=b:203035930 TEST=Built and tested on taeko board Change-Id: Ic9f3cbf5cd52ebc48b274b43fcdb57a51dcf94ec Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-10-20mb/google/brya/var/anahera: change from CLKREQ#2 to CLKREQ#6 for eMMCWisley Chen
Based on the latest schematics, change eMMC CLKREQ from CLKREQ#2 to CLKREQ#6 BUG=b:197850509 TEST=build and boot into eMMC Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I0fc87c864b62a37fc3fa7a4a9a7722bf286c007b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-20mb/google/dedede/var/bugzzy: Generate SPD ID for Samsung K4U6E3S4AB-MGCLSeunghwan Kim
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the memory parts. The memory parts being added are: 1. Samsung K4U6E3S4AB-MGCL BUG=None TEST=emerge-dedede coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I0720a51336f374f709c392c4bae4ad3e4c580a2f Reviewed-on: https://review.coreboot.org/c/coreboot/+/58409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-20mb/google/dedede/var/sasuke: Generate SPD ID for Samsung K4U6E3S4AB-MGCLSeunghwan Kim
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the memory parts. The memory parts being added are: 1. Samsung K4U6E3S4AB-MGCL BUG=None TEST=emerge-dedede coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I91183f33b92569dd49967ef866d58043d79c287b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-20mb/google/brya/var/taeko: Add fw_config probe for ALC5682-VSJoey Peng
ALC5682-VD/ALC5682-VS load different kernel driver by different _HID. Update the _HID depending on the AUDIO field of fw_config.Define fw config bit 5-7 in coreboot for codec. BUG=b:202913837 TEST=FW_NAME=taeko emerge-brya coreboot Change-Id: I635b173e0fe4c46d28f2c29fecee1998b29499b1 Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-20mb/intel/jasperlake_rvp: Rework KconfigFelix Singer
Rework Kconfig file that each variant has its own config option with their specific selects / configuration and move common selects to `BOARD_INTEL_JASPERLAKE_RVP_COMMON`, which is used as base for each variant. Also, move selects from Kconfig.name to Kconfig that the configuration is at one place and not distributed over two files. Built each variant with `BUILD_TIMELESS=1` and all generated coreboot.rom files remain identical. Excluded the .config file by disabling `INCLUDE_CONFIG_FILE` to make this reproducible. Change-Id: Ic7552195ed5a3ae6ab8e456d7d38d5539a052009 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-10-19mb/intel/kblrvp: Rework KconfigFelix Singer
Rework Kconfig file that each variant has its own config option with their specific selects / configuration and move common selects to `BOARD_INTEL_KBLRVP_COMMON`, which is used as base for each variant. Built each variant with `BUILD_TIMELESS=1` and all generated coreboot.rom files remain identical. Excluded the .config file by disabling `INCLUDE_CONFIG_FILE` to make this reproducible. Change-Id: I2a9c12a15c098fcb64c006a707c94a1aed93d73a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-19mb/intel/coffeelake_rvp: Rework KconfigFelix Singer
Rework Kconfig file that each variant has its own config option with their specific selects / configuration and move common selects to `BOARD_INTEL_COFFEELAKE_COMMON`, which is used as base for each variant. Also, move selects from Kconfig.name to Kconfig so that the configuration is at one place and not distributed over two files. Built each variant with `BUILD_TIMELESS=1` and all generated coreboot.rom files remain identical. Excluded the .config file by disabling `INCLUDE_CONFIG_FILE` to make this reproducible. Change-Id: I3b3d3cff5ea7a3f4d1c4ddd911240763e4891e06 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Thomas Heijligen <src@posteo.de>
2021-10-19mb/google/brya/var/kano: Correct SSD power sequenceDavid Wu
M.2 spec describes PERST# should be sequenced after power enable. BUG=b:192137970 TEST=FW_NAME=kano emerge-brya coreboot and boot to OS. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I20bf5ca66c6d05229c6d72058c5a73f38a58be3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-19mb/google/brya: Set same size for CSE_RW, ME_RW_A and ME_RW_BFurquan Shaikh
CSE RW firmware from ME_RW_A/ME_RW_B is copied over to CSE_RW region in case of firmware update. Ensure that the size of the regions match so that we do not have situations where ME_RW_A/B firmware grows bigger than what CSE_RW can hold. BUG=b:189177538 Change-Id: I374db5d490292eeb98f67dc684c2106d42779dac Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-19mb/google/brya: Add sub-regions to SI_ME in chromeos.fmdFurquan Shaikh
This change adds sub-regions to SI_ME in chromeos.fmd. These are required to support stitching of CSE components. BUG=b:189177538 Change-Id: I4da677da2e24b0398d04786e71490611db635ead Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-19cpu/intel/speedstep: Constify `get_cst_entries()`Angel Pons
Make the `get_cst_entries()` function provide a read-only pointer. Also, constify the actual data where applicable. Change-Id: Ib22b3e37b086a95af770465a45222e9b84202e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-19mb/google/guybrush/dewatt: update DRAM tableKenneth Chan
Samsung LPDDR4X 4266 2G K4U6E3S4AB-MGCL Hynix LPDDR4X 4266 2G H54G46CYRBX267 Micron LPDDR4X 4266 2G MT53E512M32D1NP-046 WT:B Micron LPDDR4X 4266 4G MT53E1G32D2NP-046 WT:B BUG=b:203014978 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I31ec5b84b5ad2e8d0aedf41ceb56f9e5f7fa538a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58313 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-18ACPI: Have common acpi_fill_mcfg()Kyösti Mälkki
As long as there is only one PCI segment we do not need more complicated MCFG generation. Change-Id: Ic2a8e84383883039bb7f994227e2e425366f9e13 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-18mb/intel/adlrvp_m: Enable retimer force power gpioBernardo Perez Priego
Retimer FORCE_PWR GPIO is a debug GPIO, that has to be set LOW, to allow Retimer LC Domain to toggle during a switch from DP Alt to TBT Alt modes. Contrary to DS specifying it may be left unconfigured, hence floating, there are instances seen during boot, where it stays HIGH (adlmrvp) or LOW (adlprvp). Hence configure it to LOW. Branch=none Bug=none Test=Boot to OS, connect TBT dock which enumerates in DP Alt, Login, TBT dock enumerates in TBT Alt Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I0ff58823785a31c70535ad9c913c06a653884a2c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-10-17drivers/generic/ioapic: Drop enable_virtual_wireKyösti Mälkki
All boards with DRIVERS_GENERIC_IOAPIC select it. Presumably the related configuration of routing IRQ0 when IOAPIC is enabled should be always done to provide i8259 legacy compatibility for payloads. Change-Id: Ie87816271fa63bba892c8615aa5e72ee68f6ba93 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel/skylake: switch to common ACPI codeMichael Niewöhner
Use the common ACPI code to reduce code duplication. After this change, `PSS_MAX_ENTRIES` is honored correctly in P-state table generation (as of commit c2540a9) and the number reduces from 10 to 7 entries. Also, remnants of P_BLK support missed in CB:58096 will vanish. Tested on google/fizz: no errors in dmesg, ACPI tables remain the same (except PSS, as mentioned above). Change-Id: I1ec804ae4006a2d9b69c0d93a658eb3b84d60b40 Tested-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-10-17soc/intel/skylake: switch to common GNVSMichael Niewöhner
Switch to common GNVS. No additional fields to those being present in common GNVS are used by any SKL/KBL device. Thus, they're dropped completely. Change-Id: I87ab4ab05f6c081697801276a744d49e9e1908e0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-10-17Skylake boards: Drop setting useless `IRQ_SLOT_COUNT`Angel Pons
The `IRQ_SLOT_COUNT` value is only meaningful when generating a PIRQ table. None of these boards do it, so specifying this value achieves absolutely nothing. Drop it to prevent further useless copy-pasting. Change-Id: I2d63b850c03fc1471c0eef180e8b621311b2c336 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-10-16soc/amd/stoneyridge/include/iomap: rename I2C[ABCD]_BASE_ADDRESS definesFelix Held
Picasso and Cezanne define and use APU_I2C[01234]_BASE for the base addresses of the I2C controllers, so align Stoneyridge with this. The ACPI device names aren't changed from I2C[ABCD] to I2C[0123] for now since this might change behavior in the OS and would also change the resulting binary of a timeless build. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9c400c073eba5c14bd35703b717f75df89a8719d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58370 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-16mb/google/brya/var/taeko: Add fw_config probe for GL9750 and RTS5232SJoey Peng
Add support for SD card reader GL9750 and RTS5232S BUG=b:203014989 TEST=FW_NAME=taeko emerge-brya coreboot Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I4353a094e2035ce94b5dd1a737e7e7009ad0614e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-16mb/google/brya/variants/primus: To fine tune WWAN power sequencingAriel Fang
Follow the spec to correct the WWAN poweron and powerdown sequences. BUG=b:195625346 TEST=USE="project_primus emerge-brya coreboot" and verify it builds without error. Signed-off-by: Ariel Fang <ariel_fang@wistron.corp-partner.google.com> Change-Id: I232d283a9d6093f5da64fcdce44e5cb640e3df0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58319 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-15mb/google/brya/var/taeko: Include driver for GL9763E for eMMC boot diskKevin.Chang
Support GL9763E as a eMMC boot disk BRANCH=none BUG=b:202192686 TEST=enable DRIVERS_GENESYSLOGIC_GL9763E and check eMMC on taeko. Cq-Depend: chromium:3153210 Signed-off-by: Kevin.Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I5db2b229ce1bbea54efe15f5288f13f8d4656899 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com>
2021-10-15mb/google/guybrush/bootblock: add comment about LPC_LDRQ0_PU,PD_ENFelix Held
The definition of those bits changed between Picasso and Renoir/Cezanne so add a comment where those bit definitions are used as well. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If1cf4b06fc35f94cbd482f2869fcc64739e7d272 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15mb/google/guybrush/bootblock: drop redundant clearing of LPC decodesFelix Held
The writes were originally added due to being part of the initialization sequence in the reference code, but coreboot already has those registers cleared by the time we reach this part of the code, so we can drop these redundant writes. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I43344460e5355664841d77daf1df3fd386e047e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15mb/google/kahlee/treeya/audio: use proper I2C base address defineFelix Held
I2C_BASE_ADDRESS is the beginning of the MMIO space that contains the I2C controllers MMIO. I2C[ABCD]_BASE_ADDRESS are the base addresses of the 4 I2C controllers, so use I2CA_BASE_ADDRESS instead here. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie8d6a438f76cd33929f5070f9ec6b2f280f471a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15Revert "vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main"Hsuan-ting Chen
This reverts commit 6260bf712a836762b18d80082505e981e040f4bc. Reason for revert: This CL did not handle Intel GPIO correctly. We need to add GPIO_EC_IN_RW into early_gpio_table for platforms using Intel SoC. Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Change-Id: Iaeb1bf598047160f01e33ad0d9d004cad59e3f75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57951 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-15mb/google/dedede/var/corori: Configure I2C times for TouchpadIan Feng
Configure I2C high / low time in the device tree to ensure Touchpad I2C CLK runs accurately between 380 kHz and 400 kHz. Measured I2C frequency just as below after tuning: Touch Pad CLK: 389.2 KHz BUG=b:202787528 TEST=Build and check after tuning I2C clock is between 380 kHz and 400 kHz Change-Id: I0f9d062fc611de0062a39849aee1174268391682 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-15mb/google/dedede/var/sasukette: Add PIXA2635 touchpadZhi Li
Add PIXA touchpad into devicetree for sasukette. BUG=b:202796169 BRANCH=dedede TEST=built sasukette firmware and verified touchpad function Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com> Change-Id: I5bc8353692a753ec9254ab02b4ff0481386624b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-15mainboard: Drop invalid `VGA_BIOS_FILE` defaultsAngel Pons
If the VGA BIOS file path for `VGA_BIOS_FILE` in a mainboard's Kconfig does not exist in the coreboot tree (including submodules), drop it. These files should be stored in the `site-local` subdirectory and the paths specified for each board in `site-local/Kconfig`. For example: config VGA_BIOS_FILE default "site-local/x200_vbios.bin" if BOARD_LENOVO_X200 Note that this is just an example. There are better ways to structure one's `site-local` subfolder. Using the `CONFIG_MAINBOARD_DIR` option would be one of them, though variants may still need special handling. Also, update autoport to not generate `VGA_BIOS_FILE` defaults. Change-Id: I1b5dfba035a42d7943f270f95fb7d32b285584d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-10-14mb/google/guybrush: Fix variant_has_pcie_wwan helperKarthikeyan Ramasubramanian
variant_has_pcie_wwan helper returns true if gpp_bridge_2 PCIe engine is enabled. On some variants, this engine is used by storage controllers. Fix it by adding a weak override that returns no PCIe WWAN by default. BUG=None TEST=Build and boot to OS in Guybrush. Ensure that PCIe WWAN is enumerated on boards where it is stuffed. Change-Id: I07b9dd8fc5c8c3e1557f9268c1176d4a3cade1af Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-14mb/google/hatch/var/scout: set correct i2c configurationMatt Ziegelbaum
Scout only uses I2C 1, 2, and 3 in DVT units. This removes extraneous I2C configuration copied from Puff. BUG=b:202195805 TEST=Boot scout, verify no more errors due to missing I2C devices Change-Id: Ide70a53e83b3e14540873062e3bef24d1134d2e1 Signed-off-by: Matt Ziegelbaum <ziegs@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-14mb/google/guybrush: Disable HAVE_ACPI_RESUME / S3Rob Barnes
S3 is not currently functional on Guybrush. Remove support from ACPI. BUG=b:202401767 b:181766974 TEST=Boot Guybrush Confirm 'deep' is not in /sys/power/mem_sleep Confirm S0ix suspend/resume still works BRANCH=None Change-Id: I9ed3e051f7f2e411670649ac2528a6f40229bdc6 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-14mb/google/guybrush: Assert WWAN_AUX_RST_L on S0i3 entryKarthikeyan Ramasubramanian
Currently WWAN_AUX_RST_L is in S5 domain and does not get asserted on S0i3 entry. Based on the schematics, the pull-down on that signal leads to 10 mW power leakage on S0i3 entry. Assert the signal on S0i3 entry to achieve some power savings and de-assert it on S0i3 exit. BUG=b:195748540 TEST=Build and boot to OS in Guybrush. Ensure that the signal gets asserted on S0i3 entry and de-asserted on S0i3 exit. Trigger suspend/resume cycles and ensure that the WWAN module is enumerated after each cycle. Change-Id: I43c8655ee5209779748e4365db973e094cb08aca Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58275 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-14mb/siemens/mc_ehl2: Adjust PCH serial IO settingsMario Scheithauer
Correct the PCH serial IO settings, suitable for this mainboard. Change-Id: I3c9915b2d52fbc6a15ac1e68c77bfb3983f7b1cd Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-10-14mb/siemens/mc_ehl2: Adjust USB settingsMario Scheithauer
Correct the USB settings, suitable for this mainboard. Change-Id: I691d91d2a76e27b8efdc18eeae737a78e9ae38fa Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-10-14mb/siemens/mc_ehl2: Enable PCI devicesMario Scheithauer
Correct the remaining PCI devices, differing from the ehl1 mainboard. Change-Id: I8112fa5ea86e879741061798530150701b759156 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-10-14mb/siemens/mc_ehl2: Set coreboot ready LEDMario Scheithauer
This mainboard has its own coreboot ready LED. The LED is switched on via GPIO GPP_F20. Change-Id: I3570d691e90d2cb6e11b856b876f0327da118522 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-10-13mb/google/brya/variants/brask: Init overridetreeAlan Huang
Init overridetree based on the schematics. Refer to brya0/overridetree.cb to update the settings of the devices including DPTF, WIFI, NAU8825 and etc. Refer to kano/overridetree.cb to update the SSD settings (pcie4_0). TODO: DPTF and USB positions will be further updated later. BUG=none TEST=Build Pass Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Change-Id: I30d26a47fe93736c63b578c9180b148ef73e8b9f Reviewed-on: https://review.coreboot.org/c/coreboot/+/58165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-13mb/google/guybrush: Re-arrange override speed configKarthikeyan Ramasubramanian
Currently override speed config is applied only for non EM100 cases. For EM100 case, override speed board version defaults to 0 leading to "comparison of unsigned expression >= 0 is always true" error. Fix this error by defining the override speed config for both EM100 and non-EM100 use-cases. BUG=None TEST=Build Guybrush for both EM100 and non-EM100 cases. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Id8ee7b01c69c4555d6e6a7b0d5f095ea3aaf3405 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58309 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-13mb/google/fizz: use SaGv_FixedHighMatt DeVillier
No need for dynamic config (and the additional RAM training time) on a Chromebox; always use high power/high performance mode. Change-Id: I0295bac619af45a0d82da2bf39985c8bdcb77d5e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-13mb/google/wyvern: use SaGv_FixedHighMatt DeVillier
No need for dynamic config (and the additional RAM training time) on a Chromebox; always use high power/high performance mode. Change-Id: I8ad773d1c616b746235ec67b98b83c5910464140 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-13mb/google/guybrush: Override SPI Fast speedsKarthikeyan Ramasubramanian
Add support to override SPI fast speeds based on board version from both bootblock and verstage. Overrides apply for Guybrush only and SPI speed is overridden from 66 MHz to 100 MHz starting board version 4. This will help to improve the boot time on board version by ~60 ms and still allow the old boards to boot with 66 MHz. BUG=b:199779306 TEST=Build and boot to OS in Guybrush. Perform S5->S0, G3->S0, warm reset and suspend/resume cycles for 50 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I5bf03ab8772f27aca346589e9c5662caf014d0d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-13mb/google/guybrush/var/nipperkin: update fw_config fieldKevin Chiu
update fw_config for nipperkin BUG=b:196909635 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Icd2c5509450e70aed158f146179f3a7fa24b547a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bhanu Prakash Maiya <bhanumaiya@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-13mb/google/poppy: set SMBIOS enclosure type for all poppy variantsMatt DeVillier
Some poppy variants did not select a system type, which led to the default desktop type being set. Select the best fit enclosure type for each variant. Alphabetize the variant-specific options for improved readability. Change-Id: I7c23f8fa3ae1de67f7a68b8a4e9ec16c4e8044df Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-12mb/siemens/mc_ehl: Remove unneeded 'half_populated' variableWerner Zeh
Since the DRAM population is fixed to both channels on all mc_ehl boards there is no need to have this 'half_populated' variable at all. Simply use a fixed 'false' in the call of 'memcfg_init()' and delete this variable here. Change-Id: I783c17e6d92322a8b0c094cce803108e718011fa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-12mb/siemens/mc_ehl: Use SPD data from HW-Info in the first placeWerner Zeh
The preferred location for the SPD data on mc_ehl based boards is the HW-Info data structure. Inside this structure there is a field of 128 bytes available for the SPD data. So in order to use it construct a buffer in memory which is 256 bytes long (as FSP requests minimum 256 bytes for the SPD data) and where the upper 128 bytes are taken from HW-Info holding the needed timing parameters for LPDDR4. If there is a case where HW-Info is not accessible or where the contained SPD data is not valid (by checking the CRC in HW-Info SPD) fall back to fixed SPD data set in CBFS. Change-Id: I2b6a1bde0306ba84f5214b876eaf76ca12d8f058 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-12mb/google/dedede/var/sasukette: Generate SPD ID for Samsung K4U6E3S4AB-MGCLZhi Li
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the memory parts. The memory parts being added are: 1. Samsung K4U6E3S4AB-MGCL BUG=b:202480992 TEST=emerge-dedede coreboot Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com> Change-Id: I811f32defd50a940a09f238d38c962d2caf42855 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-12soc/intel: replace dt option PmTimerDisabled by KconfigMichael Niewöhner
Replace the dt option `PmTimerDisabled` with use of the Kconfig option `USE_PM_ACPI_TIMER` for enabling/disabling the PM Timer. A default value representing the prior devicetree value was added to the boards system76/{lemp10,galp5,darp7}, so this change will not alter behaviour. Change-Id: If1811c6b98847b22272acfa35ca44f4fbca68947 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-12mb/google/guybrush/var/nipperkin: update MAX98360 HID to MX98360APatrick Huang
Update MAX98360 ACPI HID from "MX98357A" to "MX98360A" BUG=b:198716348 TEST=Build nipperkin, codec is functional with new machine driver. Cq-Depend: chromium:3195465 Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com> Change-Id: I8a1155848856db0cc4f42cfee0d914f8d1186b34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-11mb/google/guybrush: Add PCIe Reset GPIO69 to SD DXIO DescriptorMatt Papageorge
coreboot normally owns PCIe resets for all Cezanne based systems. However during S0i3 resume coreboot cannot intervene for S0 GPIOs (S5 carry over fine) so we needed an alternate way to de-assert this reset on guybrush. This change feeds in the given S0 reset GPIO (69 in this case) so that SMU may de-assert this reset on S0i3 resume. BUG=b:199780346 TEST=With latest FSP verify SD device trains each of 10 cycles Cq-Depend: chrome-internal:4157948 Change-Id: Ieee31651db30147fda84ee1aa31df7cb1c206356 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58198 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-11mb/google/guybrush: drop printk in bootblock_mainboard_early_initFelix Held
bootblock_mainboard_early_init gets called before console_init. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia5a1da336e8dfc451177a5319a656c407c9fef7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-11mb/google/guybrush/bootblock: add comment to PM_ACPI_CONF writeFelix Held
Document what setting the PM_ACPI_S5_LPC_PIN_MODE and PM_ACPI_S5_LPC_PIN_MODE_SEL bits causes. The corresponding code will eventually be factored out and moved to the Cezanne SoC code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I10e3eee5cfc1c5ba2c88b8b7e83e96e481f787e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-11mb/google/guybrush: simplify LPC_MISC_CONTROL_BITS updateFelix Held
Since the LPC_LDRQ0_PD_EN gets set right after it got cleared, we can remove the clearing of that bit. This is split off from the previous patch to be able to use timeless build to verify that the previous patch didn't change any behavior. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ieb300e7c7ce7e74c32ebdade0360ee4bd499b11a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 21:38:36 +0000