| Age | Commit message (Collapse) | Author |
|---|
|
Need to tune I2C bus 0/1/3/5 clock frequency under the 400kHz for
audio, TPM, touchscreen, and touchpad.
Audio CLK: 385 kHz
TPM CLK: 380.5 kHz
Touch Screen CLK: 373.3 kHz
Touch Pad CLK: 372.7 kHz
BUG=b:218577918
BRANCH=master
TEST=emerge-brya coreboot chromeos-bootimage
measure by scope with felwinter.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I3e5cc10d6605f9cc41fa6b31da07a81364b72fe0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Move the EC to a location that does not conflict with where the main
CBFS is in the chromeos FMAP
Change-Id: I28c84cbe2ff10d45383d896ae4f942ee49eb15c0
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62190
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update devicetree according to schematics.
TEST=Build and boot Alder Lake N RVP.
Change-Id: I9faee1cb3539a0246fc6a87e15b3150533de1ee5
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
On Sabrina SoCs the size of the APOB has increased, so the size of the
RW_MRC_CACHE FMAP sections needs to be increased in order for the data
to still fit in the corresponding FMAP partition.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib31b918aba90dd507b47aec9e1f75c138857cd02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62155
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove unecessary delay in RTD3 _ON Method after PERST# dessartion.
TEST:
2022-02-10T18:22:53.204391Z INFO kernel: [ 0.190287] ACPI: Power Resource [RTD3] (on)
2022-02-10T18:22:53.204395Z INFO kernel: [ 0.194252] ACPI: Power Resource [RTD3] (off)
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I9bc36af6e6c944fcd3de23b7d49640ad9d25642d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Disable unused USB2/TCSS Ports.
BUG=b:217238553
TEST=FW_NAME=redrix emerge-brya coreboot
Change-Id: I1cdee5b6dc56accb52ba1bf636bdf753a7bfd199
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I61f8f39ce7651d499756f4975840f32f89b04ca7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Follow thermal team design to remove TSR3 sensor and update thermal
table for next build. The DPTF parameters were verified by thermal
team.
BUG=b:219690502
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I0e34fabe546b6eabb3d3adad583668a15a1d908b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
The CIO2 port was incorrectly set to 2, while the correct port is 1
BUG=b:210801553
TEST=Build and boot on vell, camera works correctly now
Change-Id: I53d8448ed0e12777456af9b0bc65a04595b47e37
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61946
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1e0b51ee4db73bdff79365d4954a3245a430f140
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62051
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9e4837489d90c2edd7deaa2af0533085f1ff5ae6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62049
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id44213c7dd4d0df97a6c57d7f1b9d950baaf0e1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62047
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie304b08b0b1bbad5547a0169ea8056d703141391
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61830
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1a4bc1aae8e815b882a607432e40caf1066453b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61828
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I07cef3b619991afb6337c38a631ee159677d30a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61826
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0274f03926d97fc543b98f3fb961580283202806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61825
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I33e4501fd689d642682891c7f5bc9cb7ca5e331c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61824
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1940246fd88db29054f85c43672adc97dc90fa04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61823
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3d8a8a7e2b1e490726986139014cdfcf1271c64b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61805
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Idb8f30b2d1069aea1d5ce7c5dda7f99de33a7c26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61803
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iddf0727a538f2063cfabbec1f900c488331f33c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib0d1be34775c5eacf6cd9b0ec400bd42a93c59e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia9bc235c257abce2a3cd63cfd1b17ac356267d8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic3fbf307bfa42bd377c8f23c1837a6d15cb378e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I80d9038d1f41d65201d6bfdb808708f997d71faf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic97d48633ef1f246c181046ec32ab81614ba5ceb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I78734f685672347b06783f834643347a35c59e79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4e051b21ca55d25c6fc6cfb529078b18adaab2cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62028
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0c72a5c5306d63c5fce24bf727704d212d0ad0f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9cef57bbaf3e3519b7f6a7e3d86979722b598ad7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Guybrush platforms have I2C3 controller which is shared between PSP and
X86. In order to enable cooperation, PSP acts as an arbitrator. Enable
SOC_AMD_COMMON_BLOCK_I2C3_TPM_SHARED_WITH_PSP, so that proper driver is
binded on the OS side.
With this change in place it is important to use correct kernel version
which has I2C-amdpsp driver [1] enabled. Otherwise, we won't have I2C3
available and thus TPM device available in OS, what may end up as a
serious error - guybrush refuses to boot without access to TPM.
BUG=b:204508404
BRANCH=guybrush
TEST=Build proper kernel and firmware. Run on guybrush and verify TPM
functionality.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=78d5e9e299e31bc2deaaa94a45bf8ea024f27e8c
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I9dd94e47e1a02e790427b67adff84de3eb3ee387
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61965
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add chausie EC blob into CBFS at specified location
Change-Id: I48de08a18054efbda655e1563a539ff2ba7a38a6
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Qualcomm CRD devices do not have a fingerprint sensor so removing the
QUP configuration for it. This QUP also coincidentally is the same as
the one used for the TPM, so this initially was also causing TPM
communication issues during bootup as the QUP was being reconfigured
during the later stages after QcLib execution.
BUG=b:206581077
BRANCH=None
TEST=Boot to kernel without any CR50 communication errors
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I8d13b67796b70b0b7e9a4721cca0b8a54b2b27c1
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61716
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add wifi sar for vell
BUG=b:218992598
TEST=emerge-brya coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
Change-Id: I74fddd1dbcb7019fd5fe394da291f125f0d4960f
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch corrects the DQ mapping and enable ECT. In Vell design,
the DQS is swapped in Mc0.ch1, Mc0.ch3, Mc1.ch0, Mc1.ch1 and Mc1.ch2
but the DQ mappings are not swapped and that causes ECT training
failure.
BUT=b:208719081
TEST=emerge-brya coreboot chromeos-bootimage && ensure the system
passes ECT training and all the way booting to the OS.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: Idd2ad16151f0b2b93b00295b75a66ba65cba23cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:182963902
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I73dc695afb7aa2b32aa966070eb057c828073d47
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:182963902
BRANCH=None
TEST=None
Change-Id: Ia73460d335e859644511b7e9ca80111a919baf2c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Clang does not seem to work with 'fall through' in comments.
Change-Id: Idcbe373be33ef7247548f856bfaba7ceb7f749b5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The google/agah variant will use a peripheral that will require the use
of the PCIe Resizable BAR feature from the PCIe spec. Thus, select
the new Kconfig option to enable it. The appropriate Resizable BAR size
will be updated later.
BUG=b:214443809
TEST=build
Change-Id: I9cf86ba3160ae5018655b5d366e89f4273b30b94
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Change to use i2c/generic to match ELAN FW update script.
BUG=b:210970640
TEST=emerge-draco coreboot chromeos-bootimage
Change-Id: Ib416da6000d9e99f9c37cf497fb1c43e3fca0220
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add an option to build skiboot as a payload. This makes QEMU Power9
board simpler to use as skiboot is necessary anyway.
Change-Id: I0b49ea7464c97cc2ff0d5030629deed549851372
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Follow latest schematic to update the DQ map.
BUG=b:218939997
TEST=boot into OS without issue.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If29cc22b1749fb5d602d3ce64bcc1182593d673f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Disconnect all GPIO's that aren't connected to anything.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2050da62f73c0f99fbfef013c22e35225cc480c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add comment for each GPIO details its endpoint based
on the schematic.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia3678274dcd52285019fb3cf8ccd22617268ce1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The SPI ROM REQ/GNT pins are used in systems where the EC and the APU
share one flash chip to make sure that not both devices will try to
access the flash at the same time. The firmware running before the x86
cores are released from reset has likely already done this, but do it
again in bootblock just to be sure. The KBRST_L pin can be used to reset
the APU from the EC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5af285ac222ed6625f498d82360f2d1cc522df2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Commit 805956bce [soc/intel/cnl: Use Kconfig to disable HECI1]
moved HECI1 disablement out of mainboard devicetree and into SoC Kconfig,
but in doing so inadvertently disabled HECI1 for Puff-based boards which
previously had HECI1 enabled by default. To correct this, move the Kconfig
selection back into the mainboard Kconfig, and set defaults to match values
prior to refactoring in 805956bce.
Test: run menuconfig for boards google/{drallion,hatch,puff,sarien} and
ensure Disable HECI1 option defaults to selected for all except Puff.
Change-Id: Idf7001fb8b0dd94677cf2b5527a61b7a29679492
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change adds LTE power off sequence for beadrix.
BUG=b:204882915
BRANCH=dedede
TEST=FW_NAME=beadrix emerge-dedede coreboot
Change-Id: I11370bf69438465d2230e2633044ba42685a152b
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61329
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Chromebook needs to do some additional check, which is not
available in the AMD's PI released SPL table.
BUG=b:216096562
Change-Id: Ib8074641b9fc9b38239a6e3837b8569e14af3342
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Nereid does not support the LTE sub-board, so disable the LTE-related
GPIOs.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I6d6b5babeefb7c4b79adab5e756f37616c2338d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add an initial overridetree for nereid based on the pre-proto schematic
and build matrix.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I7d313439337c84ab1024b3570cc7b57b4255af5d
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Nereid P1 will also use Hynix H9JCNNNBK3MLYR-N6E. Add it to the parts
list and regenerate the memory IDs using part_id_gen.
BUG=b:217096008
TEST=abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ibacb9dfb336967dd7fffe351d785cbbff9ba8b7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Create the kinox variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:215049181
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_KINOX
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I68cac421f6299a5f82f2ab51633173648c993060
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61789
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configuration support for 4k-byte addressing mode
BUG=b:215605946
TEST=Validated on qualcomm sc7280 developement board
Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>
Signed-off-by: T Michael Turney <quic_mturney@quicinc.com>
Change-Id: If82de6204446251dded1b83684677e6eb536e6fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Data on channel 0 & 1 are normal (from DMIC)
but there is noise on channel 2 & 3, so change to NF
PAD_CFG_NF(GPP_R6, NONE, DEEP, NF4) to PAD_NC(GPP_R6, NONE),
PAD_CFG_NF(GPP_R7, NONE, DEEP, NF4) to PAD_NC(GPP_R7, NONE),
BUG=b:210802722
TEST=FW_NAME=vell emerge-brya coreboot
Change-Id: I1b5ccd2c239e526e4f1ce2d5ed6c1386303590c8
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61033
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The `reset` gpio is currently being consumed by the btusb kernel driver.
The functionality was added in https://crrev.com/c/3342774. The goal of
the patch was to reset the BT device when command timeouts occur. This
works, but it doesn't support the case where the BT device is having
problems with USB enumeration. In that case the device can't enumerate
so the driver can't help resetting the device.
If we instead switch to using an ACPI power resource, the kernel can
control the BT device's power. This is beneficial when the device is
having USB communication problems since the kernel will try and power
cycle the device.
We don't lose the ability to reset the device on command timeouts
either since `btusb_qca_cmd_timeout` will enqueue a USB port reset if
there is no `reset` GPIO. So win / win.
This results in the following power resource:
PowerResource (PR02, 0x00, 0x0000)
{
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x01)
}
Method (_ON, 0, Serialized) // _ON_: Power On
{
\_SB.CTXS (0x84)
Sleep (0x01F4)
}
Method (_OFF, 0, Serialized) // _OFF: Power Off
{
\_SB.STXS (0x84)
Sleep (0x0A)
}
}
I switched the device tree entry from using reset_gpio to enable_gpio
because the acpi_device_add_power_res method asserts the reset in the
_ON method unconditionally. This results in a small glitch on the line.
By using the enable_gpio we get the correct behavior.
I don't have a datasheet right now, so I just picked some values for the
reset timing. The kernel driver was using 200ms. We can revisit the
numbers when we get a datasheet.
BUG=b:218295688
TEST=Suspend stress test on nipperkin with 600+ cycles. Verify power
resource is created on the kernel. This should allow the kernel to
power cycle the device via usb_acpi_set_power_state.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib1eff86db76929f76432cd6f765880c892e7a786
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
When brya boards that use ChromeOS autoupdate update their firmware,
devices with SOC_INTEL_CSE_SUB_PART_UPDATE will end up attempting to
replace IOM and NPHY BPDT firmware in the CSE region. However, because
of the way the autoupdate works, the CSE RO will not be updated during
autoupdate. This means that these boards now have different stitching
schemes between CSE RO and RW and this causes the sub-partition update
to fail and the boot hangs. To remedy the situation for these boards,
a separate FMD files is provided so they can continue to use the
cse_serger tool for stitching. The only boards affected were kano and
brask, so they are updated here.
BUG=b:218376385
TEST=use flashrom to downgrade to 14474 then use futility to update to
image with this patch and system boots.
Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com>
Change-Id: Ia8bdf6b28d952f6d983b84e39da96e159027a822
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Brask cannot pass powerd_dbus_suspend test because the NIC does not
enter ASPM L1.2. Here we add "enable_aspm_l1_2" in devicetree for
RTL8125 to enable ASPM L1.2.
BUG=b:204309459
BRANCH=None
TEST=emerge and test with command powerd_dbus_suspend
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I9a56df1d68696f409f9ee681d37de6759a588d80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add/update initial GPIO pin descriptions and initialization types for
chausie mainboard.
Change-Id: I14ea0e1086f626398a867896ee81ce07cf530182
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This change adds LTE modem for beadrix.
BUG=b:204882915
BRANCH=dedede
TEST=Build and boot beadrix, check with command modem status
Change-Id: I7acb88634478ff486810b2c3fc14d6739c3268e1
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61328
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Agah port 0 does not have a retimer so the port needs
to be configured for the SOC to handle Aux orientation flipping.
Add the "TcssAuxOri" and "typec_aux_bias_pads" to lets the SoC IOM firmware control the Aux DC bias voltages.
BUG=b:210970640
BRANCH=NONE
TEST=emerge-draco coreboot chromeos-bootimage
Change-Id: I1fa5c4574b1a0e8dd2f66f3f6382436337c530fa
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Alder Lake N has single memory controller with 64-bit bus width. Alder
Lake common meminit block driver considers bus width to be 128-bit and
populates the meminit data accordingly. By setting half_populated to
true, only the bottom half is populated.
Ideally, half_populated is used in platforms with multiple channels to
enable only one half of the channel. Alder Lake N has single channel,
and it would require for new structures to be defined in meminit block
driver for LPx memory configurations. In order to avoid adding new
structures, set half_populated to true. This has the same effect as
having single channel with 64-bit width.
Change-Id: I414e5dc82caf47b6b96c474b3ef6e01c2ce0226e
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
The mainboards mc_apl{2,4,5,6} use VBOOT for verification and can be in
a recovery state for different reasons. In this case we still want the
MRC cache to be around to avoid the DRAM retraining on every boot.
This patch enables the Kconfig switch HAS_RECOVERY_MRC_CACHE which makes
the already available MRC recovery region in FMAP useable.
Test=Boot mc_apl2 in recovery mode and make sure the recovery MRC
cache is used.
Change-Id: I2ea4993f05dd87a0e637f55e84b4fc06f5e29ecc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
This IRQ routing info is taken from mb/google/guybrush. The IRQ routing
on Chausie that was a 1:1 copy caused some issues with the I2C driver,
so port the Chausie IRQ mapping change back to Majolica.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieb958639dd8aef7c60c050ad107dde7d1cd6a8bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This IRQ routing info is taken from mb/google/guybrush. This should fix
these errors:
[ 0.655051] i2c_designware AMDI0010:00: IRQ index 0 not found
[ 0.659239] i2c_designware AMDI0010:01: IRQ index 0 not found
[ 0.663198] i2c_designware AMDI0010:02: IRQ index 0 not found
[ 0.667200] i2c_designware AMDI0010:03: IRQ index 0 not found
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8c85c8e4b1c860d6ca25060353355f703a49e1e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
|
|
BUG=b:204401306
BRANCH=guybrush
TEST=emerge-guybrush coreboot
dump SSDT, see _HID instead of _ADR
Change-Id: I3f45fabac1548cca39379f91cc42fed0cd04f8a3
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Config USE_PM_ACPI_TIMER to y for primus4es only as
commit 1ce0f3aab7 (mb/google/brya: Fix S0i3 regression)
breaks suspend stress test on ES CPU SKU.
BUG=b:211377699
TEST=USE="project_primus emerge-brya coreboot" and verified
the suspend stress test works on primus4es.
Change-Id: I8d19c10e2029e233542a8ceec272f8ede2b4bfac
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
It's available in %r3 in bootblock and needs to be passed to payload in
%r27. We use one of two hypervisor's special registers as a buffer,
which aren't used for anything by the code.
Change-Id: I0911f4b534c6f8cacfa057a5bad7576fec711637
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
"hb-mode" is a -machine flag for QEMU. "hb" stands for Hostboot, which
is OpenPower firmware created by IBM.
QEMU for PPC64 can run initial program in two different modes:
* hb-mode=off with load address 0x00000000
* hb-mode=on with load address 0x08000000
Real hardware always loads firmware at 0x08000000 and coreboot shouldn't
require a special build to be run on QEMU.
Memory layout is updated to reflect change of load address.
Change-Id: I1bdc97a095bd46fccc862985b3bd24f4fa5bc054
Signed-off-by: Yaroslav Kurlaev <yaroslav.kurlaev@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Change-Id: Ie333294c7a311f6d47bdfbd1fc3cec0128cf63e7
Signed-off-by: Yaroslav Kurlaev <yaroslav.kurlaev@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Add initial implementation for booting on QEMU POWER9 emulation.
Change-Id: I079c5b9ad564024dd13296ef75c263bdc40c9d39
Signed-off-by: Yaroslav Kurlaev <yaroslav.kurlaev@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This change adds mem_parts_uesd.txt that contains the new memory parts
used (H54G46CYRBX267,H54G56CYRBX247) by primus and Makefile.inc
generated by gen_part_id using mem_parts_used.txt.
BUG=b:218415732
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I0d236c51f0c996a22954046876f3494ba9e62693
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
makefile variables
Currently apu/amdfw_a-position and apu/amdfw_b-position currently depend on CEZANNE_FW_A_POSITION and CEZANNE_FW_B_POSITION. This causes error messages from awk as these variables are sourced from fmap_config.h and these variables are expanded before fmap_config.h is built. However these variables should not be set to CEZANNE_FW_*_POSITION. These files end up in the FW_MAIN_* fmap regions. These regions are placed at the proper locations through the chromeos.fmd file. The apu/amdfw_*-position variables are the positions within these regions where the files end up. These variables should be set to 0x40 to coincide with the beginning of the FW_MAIN_* regions, accounting for the size of struct cbfs_file + filename + metadata, aligned to 64 bytes. Currently they end up in the correct locations only because fmap_config.h does not exist when the apu/amdfw_*-position variables are expanded.
This change explicity sets the value of these variables to 0x40, removing the errors from awk and ensuring that these files end up in the correct location in the resulting image. These changes are also applied to the Picasso and Sabrina makefiles as well.
BUG=b:198322933
TEST=Verified that the apu/amdfw_* files end up in the correct locations as reported by cbfstool during the build, did timeless builds and confirmed that coreboot.rom images were identical, tested AP firmware on guybrush and zork devices
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: If1c2b61c5be0bcab52e19349dacbcc391e8aa909
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Nissa is using the FM101, which has the following power sequencing
requirements:
Power on: assert WWAN_EN, delay 20 ms, deassert WWAN_RST_L
Power off: assert WWAN_RST_L, delay 20 ms, deassert WWAN_EN
Add a power resource to the USB device, and use wwan_power.asl to
handle the power off sequence.
BUG=b:217092522
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ibe1b863a550c6af1ac3eb98f2aaa3db15b149ada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Nissa is using the FM101 which is USB only. To allow us to reuse the
existing wwan_power.asl for power sequencing, move the PCIe-specific
part behind a new Kconfig HAVE_PCIE_WWAN.
BUG=b:217092522
TEST=Build brya0 and check that generated dsdt.asl doesn't change.
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Icb6db91ce00deb2b30379f5ff7a974d1feb62ea8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
If the LTE USB DB is not connected, disable the LTE-related GPIOs.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I86251d8ad58d82ff2112ac5f2dfafdabbff4c76f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add an initial overridetree for nivviks based on the pre-proto schematic
and build matrix.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Id3ecd184415a20a3a52da8bb5e60fe2ce0495b44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
The SMMSTORE region needs to be 64K aligned or error will be thrown.
Change-Id: I5d4f71f80c3219ac2c7000e1fa95fd04100d9cfe
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Adjust Kconfig so all variants use proper VBTs.
Add Makefile entries for variants which use multiple VBTs.
extracted from ChromeOS firmwares:
Google_Coral.10068.113.0
Google_Pyro.9042.233.0
Google_Reef.9042.233.0
Google_Sand.9042.220.0
Google_Snappy.9042.253.0
Change-Id: I46ad4ec321e32d019e44f0741956b18a464fb8ae
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Drop unnecessary switch break after return, to alleviate linter warnings.
Change-Id: I7cc49caaeafb490cb62b75ec5c3ca4822573464b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Several commits were made to the Chromium coral branch
(firmware-coral-10068.B) which were not committed upstream first.
Pull them in here:
486ce56 mainboard/google/coral: Override VBT selection for babymako
c1d7720 Babymako: add touchpad i2c speed config
911d547 mainboard/google/coral: Override VBT selection for babytiger
730a5af Babytiger: add touchpad i2c speed config
724711e rabbid: add the touchpad i2c speed config
80c5d16 mainboard/google/coral: Override VBT selection for babymega
e8931a4 Babymega: add touchpad i2c speed config
These add support for additional coral sub-variants. The I2C speed config
changes were adapted to account for upstream changes not present in the
coral Chromium branch.
Change-Id: Idf2a53a351138aff310385f4026197d74ab6848b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Release firmware on Nasher/Nasher360 are built as coral
sub-variants; remove the old/unused code
Change-Id: Ie8d10a31e663230b7deabf92e1c06cd991bbdccb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Create the moli variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:214439135
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_MOLI
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I3f3bfd3db12cba8b73b351e7c700b6a58797c906
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
When booting ADL RVP, coreboot is unable to load VBT binary as
makefile will rename VBT binary to "vbt.bin" when building
coreboot.rom.
The reason for having this function is that chromeOS has emerge
tool to streamline the VBT stitching process to support multiple
VBTs for different RVP boards; while we only need 1 vbt for generic
non-chromeOS usage. Hence add a chomeos kconfig to guard this.
TEST=Able to boot ADL RVP DDR5 with DP display.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I5f6f9554b75f4d62198aac9938e65c71c3e7cee9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add wifi sar for magneto.
Due to fw-config cannot distinguish between magolor and magneto.
Using sku_id to decide to load magneto custom wifi sar.
BUG=b:208261420
TEST= emerge-dedede coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I77f141372ba8e7b8f5849b00e115ad8bb1e7ca00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different _HID
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11)
for codec selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:204517112
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I5c1c9819af1e0bc2278dadeffb6b19c3f9068f30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different _HID
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11)
for codec selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:218245715
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I081dcf5451c82c03592f954ee25267b31ad81753
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
use DEV_PTR to get codec HID for simplify the variant.c code
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:204523176
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Idf5b3661e74a189390d25381e03448c28a966f38
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61671
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add fw_config NAU88L25B_I2S field, I2S2 configuration and
enabling CnviBtAudioOffload UPD bit.
BUG=none
TEST=temerge-brask coreboot
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Change-Id: Id5da8c5c471be176bc0fe1eda4da7faf8ed2e8d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61404
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
volmar boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I36355af771fbf97e655f2fd6e0505c657e0420b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
vell boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I0c39d06e3b2f39db88d924205786bfa1b27df3fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
taniks boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Icf6cb0d057f9ad3cbcc1155423ed7efa58a46d0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
taeko4es boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I82bdf8a1bfe2df0fc1d50d154def8742714321ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
taeko boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ib30815dbe99342b6afd9af9f1aa9ff61c9a4fe80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
redrix boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ifd69a9c2f1a71aefc19adf6931e10de62d05fb2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
redrix boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If08ae5c96232efd03d77090c3c6979c77f95c998
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
primus boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I71f7391df6d827b75f87e54e17f6f7983a9e829b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
primus boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I3133a992617c833fd13df97795c46ec04ebb8bf9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
kano boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I1d8c003b19381e6a76aff8c844546694c5710e53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
gimble boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If71ceb07a9894a0571a9983d008058598693986f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
gimble boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Idd398d819dcb30a3ec588ce2ef4562a728f99405
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
