summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Expand)Author
2019-01-02mb/google/octopus/variants: Add 20ms reset delay for WACOM deviceMarco Chen
2019-01-01mb/google/hatch: Enable CNVi Wifi for hatchMaulik V Vaghela
2019-01-01mb/google/hatch: Add NC gpios for display and correct the orderMaulik V Vaghela
2018-12-31mb/google/hatch: Enable NVME support for HatchV Sowmya
2018-12-31mb/google/hatch: Add the USB port configurationV Sowmya
2018-12-31mb/google/hatch: Enable SATA for HatchV Sowmya
2018-12-29mainboard: Add Supermicro X10SLM+-FTristan Corrick
2018-12-29mb/google/glados/variants/caroline/devicetree.cb: Remove unneeded white spacesElyes HAOUAS
2018-12-29mb/google/octopus: Override emmc DLL values for FleexBora Guvendik
2018-12-29mb/google/sarien: Adjust GPD3 pin terminationLijian Zhao
2018-12-29mb/google/hatch: Enable Host Bridge/CSME/PMC/P2SB/SMBusRizwan Qureshi
2018-12-28mb/pcengines/apu2/romstage.c: disable SVI2 wait completionKrystian Hebel
2018-12-28mb/google/poppy/variant/nami: add the vbt setting for bard skuRen Kuo
2018-12-28intel/gma/Makefile.inc: Add a helper function to add VBT binariesArthur Heymans
2018-12-28sb/intel/lynxpoint: Handle H81 only having 6 PCIe root portsTristan Corrick
2018-12-28mb/google/octopus: Override emmc DLL values for PhaserBora Guvendik
2018-12-28mainboard/google/poppy/variants/rammus: Fixed touchscreen function failedKane Chenffd
2018-12-28arch/x86: Drop spurious arch/stages.h includesKyösti Mälkki
2018-12-28mb/google/hatch: Enable SPI controller for HatchRizwan Qureshi
2018-12-28mb/google/hatch: Enable console UARTMaulik V Vaghela
2018-12-28mb/google/hatch: Enable LPC/eSPI controllerAamir Bohra
2018-12-27mb/google/hatch: Add SMI handlersAamir Bohra
2018-12-25mb/google/hatch: Add HPD GPIO support for displaysMaulik V Vaghela
2018-12-25mb/google/hatch: Modify hatch SPI flash layoutV Sowmya
2018-12-25mb/google/hatch: Enable EC LPC interface and configure IO decode rangeAamir Bohra
2018-12-25mb/google/hatch: Add SoC and EC asl files in DSDTAamir Bohra
2018-12-25mb/google/hatch: Add EC trigger events and acpi configsAamir Bohra
2018-12-24mb/asus/p5qpl-am: Add mainboardArthur Heymans
2018-12-24drivers/aspeed/ast: Select `MAINBOARD_HAS_NATIVE_VGA_INIT`Tristan Corrick
2018-12-24Revert "mb/google/octopus/variants/fleex: Update Charger throttling settings"Sumeet Pawnikar
2018-12-23mb/google/hatch: Enable IGD (Integrated GFX Device)Maulik V Vaghela
2018-12-23mb/google/hatch: Add memory init setup for hatchAamir Bohra
2018-12-22mb/google/hatch: Enable Elan TrackpadShelley Chen
2018-12-22mb/google/hatch: Fixes to initial hatch mainboard checkinShelley Chen
2018-12-22cbmem: Always use EARLY_CBMEM_INITKyösti Mälkki
2018-12-22emulation/qemu-{i440fx,q35}: Don't migrate globalsArthur Heymans
2018-12-22Revert "mb/google/octopus: Add custom SAR values for Bobba"Justin TerAvest
2018-12-21mb/google/sarien: Disable pcie interface for wwanLijian Zhao
2018-12-21mb/intel/coffeelake_rvp: Update default configurationWonkyu Kim
2018-12-21mb/google/poppy/variants/atlas: Remove duplicate entry of dptf_enableSumeet Pawnikar
2018-12-21mb/google/poppy/variants/nami: Add micron_dimm_MT40A512M16TB-062EJ SPDFrank Wu
2018-12-21mb/google/poppy/variants/nami: Add micron_dimm_MT40A256M16LY-075F SPDIvy Jian
2018-12-21mb/pcengines/alixxx: Drop boardsArthur Heymans
2018-12-21mb/google/hatch: Enable H1 TPM support over SPI interfaceAamir Bohra
2018-12-21mb/google/hatch: Clean up gpio definitions in hatch variantAamir Bohra
2018-12-20Revert "mb/google/poppy/variants/nocturne: Add DMIC properties to ACPI DSD"Jenny TC
2018-12-20mb/intel/kblrvp: Change HDA verb table selection logicPraveen hodagatta pranesh
2018-12-19zoombini: remove support for deprecated zoombini boardBob Moragues
2018-12-19mb/google/octopus: Override emmc DLL values for YorpBora Guvendik
2018-12-19mb/ocp/wedge100s/romstage: Workaround broken platform statePatrick Rudolph
2018-12-19mb/google/sarien: Enable DMI/SATA power OptimizeLijian Zhao
2018-12-19mb/google/kahlee: Remove board_id check for Liara 2T timingsMartin Roth
2018-12-19mb/google/variant/nocturne: set CONFIG_NO_FADT_8042Nick Vaccaro
2018-12-19google/rambi: disable TXE in devicetree for all variantsMatt DeVillier
2018-12-19google/cyan: set touchscreen GPIO to non_maskableMatt DeVillier
2018-12-19mb/asus/maximus_iv_gene-z: Select NO_UART_ON_SUPERIOTristan Corrick
2018-12-19mb/sifive/hifive-unleashed: remove the definition of MAX_CPUSXiang Wang
2018-12-19smsc/sch5147: Implement ACPI handling of a few LDNArthur Heymans
2018-12-19mb/lenovo/thinkcentre_a58: Add mainboardArthur Heymans
2018-12-19mb/foxconn/g41s-k: Don't reprogram inherited subsystemidArthur Heymans
2018-12-19mb/google/sarien: Use meaningful SATA modeLijian Zhao
2018-12-19mb/asrock/h81m-hds: Allow "keep state" for power_on_after_failTristan Corrick
2018-12-19mb/google/sarien: Enable ELAN Touchpad and Disable ALPS TouchpadChris Zhou
2018-12-19mainboard: Remove useless include <device/pci_ids.h>Elyes HAOUAS
2018-12-19mb/google/octopus/var/ampton: Tune I2C AudioJustin TerAvest
2018-12-18Revert "google/sarien: Increase BIOS region to 28MB"Lijian Zhao
2018-12-18mb/asus/kgpe-d16: Set ASpeed GPIO SPD mux lines during bootTimothy Pearson
2018-12-18mb/google/sarien/variants/arcada: Enable touchpad and touchscreenCasper Chang
2018-12-18mb/google/kahlee/liara: Document why IOMMU is disabledJonathan Neuschäfer
2018-12-18src/mb/google/*/Kconfig: Consistently use $(...) for variablesJonathan Neuschäfer
2018-12-18mb/google/poppy/variants/nami: Add sku_ids for SyndraAmanda Huang
2018-12-17mb/google/octopus/variants/fleex: Update Charger throttling settingsSumeet Pawnikar
2018-12-17mb/google/octopus: Add custom SAR values for BobbaJustin TerAvest
2018-12-17mb/google/poppy/variants/nami: perform PL2 setting for bard/ekkoRen Kuo
2018-12-17siemens/mc_apl4: Enable RTC RX6110SA on this mainboardUwe Poeche
2018-12-17siemens/mc_apl4: Enable LVDS Display on mc_apl4Uwe Poeche
2018-12-17siemens/mc_apl4: Add GPIO configurationUwe Poeche
2018-12-15mb/{intel,google}/{icelake_rvp,dragonegg}: make use of cpu_get_cpuid() helper...Subrata Banik
2018-12-14cheza: Add board reset via Chrome ECJulius Werner
2018-12-14mb/google/octopus: Override emmc DLL values for BobbaBora Guvendik
2018-12-14google/grunt: Correct mismatch character hynix-H5AN8G6NAFR-UH.spd.hex SPD fil...Lucas Chen
2018-12-14google/grunt: Correct mismatch character hynix-H5ANAG6NAMR-UH.spd.hex SPD fil...Lucas Chen
2018-12-13mb/google/hatch: Creating skeleton directories and filesShelley Chen
2018-12-12cheza: board-level GPIO supportT Michael Turney
2018-12-12mb/google/octopus/ampton: Fix the TRACKPAD_INT_ODL GPIO configurationKarthikeyan Ramasubramanian
2018-12-12cheza: TPM/EC enable Kconfig in mainboardT Michael Turney
2018-12-11mb/google/octopus/variants/meep: Add 20ms reset delay for WACOM deviceTony Huang
2018-12-11mb/google/sarien: Disable unused SATA portsLijian Zhao
2018-12-11mb/google/sarien: Disable PCH Gigabit LANLijian Zhao
2018-12-11mb/intel/x200: Add data.vbtArthur Heymans
2018-12-11mb/google/poppy/variants/nami: Modify SPD for hynix memory partRen Kuo
2018-12-10mb/intel/icelake_rvp: Fill Icelake U and Y RVP devicetree parametersAamir Bohra
2018-12-10mb/google/octopus: Update the PEN_EJECT GPIO configurationKarthikeyan Ramasubramanian
2018-12-10mb/google/sarien: Update GPIOs for next buildDuncan Laurie
2018-12-10mb/google/sarien: Setup GPIOs again after FSP-SDuncan Laurie
2018-12-09mb/google/octopus/phaser: Fix trackpad GPE wake configurationKarthikeyan Ramasubramanian
2018-12-09mb/google/sarien: Enable LAN clock source usageLijian Zhao
2018-12-08google/grunt: Update micron-MT40A1G16KNR-075-E.spd.hex SPD file ModuleLucas Chen
2018-12-07google/grunt: Update hynix-H5AN8G6NAFR-UH.spd.hex SPD file Module PartLucas Chen
2018-12-07google/grunt: Update micron-MT40A512M16JY-083E-B.spd.hex SPD file ModuleLucas Chen
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 13:22:03 +0000