summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Expand)Author
2014-01-19board_info.txt: Categorize various boardsVladimir Serbinenko
2014-01-19boardstatus: Remove some needless name overrides.Vladimir Serbinenko
2014-01-19boardstatus: Handle clones.Vladimir Serbinenko
2014-01-19board-status: Add board_info.txt manually for irregular wiki entriesVladimir Serbinenko
2014-01-19board-status: Add board_info.txt extracted from wiki.Vladimir Serbinenko
2014-01-19jetway/j7f4k1g2e and jetway/j7f4k1g5d: Add as clones of jetway/j7f2.Vladimir Serbinenko
2014-01-19jetway/j7f24: Rename to jetway/j7f2.Vladimir Serbinenko
2014-01-19via/epia-mii and via/epia-ml: Add as clones of epia-m.Vladimir Serbinenko
2014-01-18iei/rocky-512: Add it as an explicit clone of juki-511p.Vladimir Serbinenko
2014-01-18A8N-SLI: Add it explicitly as a clone of A8N-EVladimir Serbinenko
2014-01-16butterfly: fix compilation with !CHROMEOSVladimir Serbinenko
2014-01-15ROMSIZE: Add option for 12M chips.Vladimir Serbinenko
2014-01-15Intel (sandy/ivy): Avoid calling cbmem_initialize() twiceKyösti Mälkki
2014-01-15google/stout: Add EARLY_CBMEM_INITKyösti Mälkki
2014-01-15Re-declare CACHE_ROM_SIZE as aligned ROM_SIZE for MTRRKyösti Mälkki
2014-01-14cubieboard: Setup CPU clock in romstage and load ramstageAlexandru Gagniuc
2014-01-13cubieboard: Configure system voltages from devicetreeAlexandru Gagniuc
2014-01-12X60: Enable WWAN by default.Vladimir Serbinenko
2014-01-12ec/lenovo/h8: Make trackpoint enable a CMOS option.Vladimir Serbinenko
2014-01-12ec/lenovo/h8: Remove trackpoint_enable from device tree.Vladimir Serbinenko
2014-01-12ec/lenovo/h8: make wlan config a CMOS optionVladimir Serbinenko
2014-01-12ec/lenovo/h8: Allow control of low-battery beep.Vladimir Serbinenko
2014-01-12ec/lenovo/h8: Allow user to disable powermanagement beeps.Vladimir Serbinenko
2014-01-12ibexpeak / bd82x6x: Make SATA mode user-visible option.Vladimir Serbinenko
2014-01-12ec/lenovo/h8: Implement sticky Fn option.Vladimir Serbinenko
2014-01-12ec/lenovo/h8: Add an option to swap ctrl and fn.Vladimir Serbinenko
2014-01-12CBFS: use cbfs_get_file_content whenever possible rather than cbfs_get_fileVladimir Serbinenko
2014-01-12ec/lenovo/h8: Remove wlan_enable and wwan_enable from device tree.Vladimir Serbinenko
2014-01-10Replace all occurences of sprintf with snprintfVladimir Serbinenko
2014-01-09X201: set default USB debug controller to 2.Vladimir Serbinenko
2014-01-09bd82x6x/ibexpeak: Make DRAM reset gate GPIO configurableVladimir Serbinenko
2014-01-09cubieboard: Initialize memory in bootblockAlexandru Gagniuc
2014-01-09cubieboard: Keep AHB clock within specsAlexandru Gagniuc
2014-01-09cubieboard: Turn on green LED during bootblockAlexandru Gagniuc
2014-01-08cpu/allwinner/a10: Refactor API for gating clocks to peripheralsAlexandru Gagniuc
2014-01-08cpu/allwinner/a10: Refactor and document pinmux APIAlexandru Gagniuc
2014-01-08mainboard: Add preliminary support for A10-based CubieboardAlexandru Gagniuc
2014-01-04X201: Fix native video initVladimir Serbinenko
2014-01-03asrock/imb-a180: Configure the 6 COM ports and the keyboardDave Frodin
2014-01-03Add the gizmosphere/gizmo mainboardDave Frodin
2013-12-30AMD K8 (rev F): Move rev F0/F1 workaround to headerKyösti Mälkki
2013-12-30AMD K8 (rev F): Move MEM_TRAIN_SEQ check to northbridgeKyösti Mälkki
2013-12-30AMD K8: Define MEM_TRAIN_SEQ only with K8_REV_F_SUPPORTKyösti Mälkki
2013-12-30AMD K8 (pre-F): Clean platforms without K8_REV_F_SUPPORTKyösti Mälkki
2013-12-29AMD K8 (rev-F): Always have RAMINIT_SYSINFOKyösti Mälkki
2013-12-29AMD fam10: Drop RAMINIT_SYSINFOKyösti Mälkki
2013-12-29via/epia-m700: Drop RAMINIT_SYSINFOKyösti Mälkki
2013-12-29AMD K8: Socket implies K8_REV_F_SUPPORTKyösti Mälkki
2013-12-27via: Write »access« without »m« at endPaul Menzel
2013-12-26AMD AGESA: Drop MEM_TRAIN_SEQKyösti Mälkki
2013-12-26AMD fam10: Drop MEM_TRAIN_SEQKyösti Mälkki
2013-12-26AMD boards (non-AGESA): Cleanup post_cache_as_ram.c includesKyösti Mälkki
2013-12-26AMD boards (non-AGESA): Cleanup earlymtrr.c includesKyösti Mälkki
2013-12-26vortex86ex: Cleanup earlymtrr.c includeKyösti Mälkki
2013-12-24Remove PCI_ROM_RUN optionVladimir Serbinenko
2013-12-23Coding style: punctuation cleanup [1/2].Idwer Vollering
2013-12-21exynos5420: Configure the UART pins unconditionallyGabe Black
2013-12-21exynos5250: Implement support to boot with USB A-A firmware uploadJulius Werner
2013-12-21snow: Set up the i2s0 pins during bootGabe Black
2013-12-21armv7/exynos: Fix and remove memory reset workaroundsHung-Te Lin
2013-12-21Pit: graphicsRonald G. Minnich
2013-12-21kirby is dead. long live the arm pit.Stefan Reinauer
2013-12-21pit: update PMIC write sequence in romstageDavid Hendricks
2013-12-21snow: TPS69050 -> TPS65090David Hendricks
2013-12-21kirby: pit: Fix up wakeup_need_resetGabe Black
2013-12-21pit: Get rid of the mostly unnecessary exynos5420.hGabe Black
2013-12-21kirby: Clean some cruft from mainboard.cGabe Black
2013-12-21kirby: Neutralize wakeup.c and delete the mostly unused exynos5420.hGabe Black
2013-12-21Add a kirby board which is mostly a copy of pitGabe Black
2013-12-21Exynos 5420: Enable dynamic CBMEMStefan Reinauer
2013-12-21Exynos 5250: Enable dynamic CBMEMStefan Reinauer
2013-12-21google/pit: disable SYSMMU for graphicsRonald G. Minnich
2013-12-21Refactor code containing aux callsFurquan Shaikh
2013-12-21Slippy/Falco: Fill in right values for PHSYNC and PVSYNC in transcoder flagsFurquan Shaikh
2013-12-21Add cpu transcoder attribute to intel dpFurquan Shaikh
2013-12-21Calculate transcoder flags based on pipe configFurquan Shaikh
2013-12-21peppy: Set optimal DTLE register valuesShawn Nematbakhsh
2013-12-21wtm2: disable SDcard USB portDuncan Laurie
2013-12-21slippy/falco/peppy: Fix EC wake events in S5Duncan Laurie
2013-12-21falco: Force enable ASPM on PCIe Root Port 1Duncan Laurie
2013-12-21falco: Disable unused clocksDuncan Laurie
2013-12-21falco: Enable EC controlled throttlingDuncan Laurie
2013-12-21falco: Drive GPIO59/LTE_DISABLE_L low on S3/S5Duncan Laurie
2013-12-21pit: Add missing elements to the edid data structureGabe Black
2013-12-21pit: Bump the EC SPI bus speed up to 5 MHzGabe Black
2013-12-21falco: add rtd2132 settings to device treeAaron Durbin
2013-12-21Pit: set PWM to external on ParadeRonald G. Minnich
2013-12-21Pit: move parade writes to mainboard.cRonald G. Minnich
2013-12-21peppy: Drive WLAN_DISABLE_L / BT_ON low in S3 and S5.Shawn Nematbakhsh
2013-12-21FUI: Fill in link_m and link_n valuesFurquan Shaikh
2013-12-21Slippy: remove unneeded code in i915io.cRonald G. Minnich
2013-12-21slippy/falco/peppy: Route USB to XHCI on resumeDuncan Laurie
2013-12-21haswell boards: fix SATA interrupt in ACPIDuncan Laurie
2013-12-21slippy/falco/peppy: update ACPI C-state settingsDuncan Laurie
2013-12-21lynxpoint me: add support for mbp clear wait in finalize stepDuncan Laurie
2013-12-21Revert "lynxpoint: Move ME lock down to ramstage"Duncan Laurie
2013-12-21SLIPPY: final changes for FUIRonald G. Minnich
2013-12-21peppy: Duplicate SPD data for 2GB configurations.Shawn Nematbakhsh
2013-12-21haswell boards: Use PECI temp sensor id 0Duncan Laurie
2013-12-21falco: Enable RTD2132 spread spectrum at 1.0%Duncan Laurie
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 17:06:17 +0000