summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Expand)Author
2020-09-08mb/google/dedede/var/drawcia: Configure I2C high and low timeKarthikeyan Ramasubramanian
2020-09-08mb/google/dedede/var/waddledee: Configure I2C high and low timeKarthikeyan Ramasubramanian
2020-09-08nb/intel/ironlake: Use an enum for `gpu_panel_port_select`Angel Pons
2020-09-08nb/intel/sandybridge: Use an enum for `gpu_panel_port_select`Angel Pons
2020-09-08nb/intel/haswell: Drop `gpu_panel_port_select`Angel Pons
2020-09-08soc/intel/broadwell: Drop `gpu_panel_port_select`Angel Pons
2020-09-08mb/google/volteer: config QS silicon devices for CSE LITEMark Hsieh
2020-09-08mainboard/google/volteer: Disable S0i3.4 if cr50 firmware is too oldJes Klinke
2020-09-08mb/intel/jasperlake_rvp: Add DTT support for jslrvpSumeet R Pawnikar
2020-09-08mb/google/kukui: Add LPDDR4X Samsung K4UBE3D4AA-MGCR 4GB supportKevin Chiu
2020-09-08hatch: Create dooly variantTony Huang
2020-09-07mb/google/zork: update TS power control for dirinbozKevin Chiu
2020-09-07mb/system76/lemp9: Add SMBIOS descriptions to root portsFelix Singer
2020-09-07mb/system76/lemp9: Move PCIe root port config into devicetreeFelix Singer
2020-09-07mb/system76/lemp9: Add comments to SATA portsFelix Singer
2020-09-07mb/system76/lemp9: Move USB options into devicetreeFelix Singer
2020-09-07mb/system76/lemp9: Enable SataPortsDevSlpFelix Singer
2020-09-07mb/system76/lemp9: Move SATA options into devicetreeFelix Singer
2020-09-07mb/system76/lemp9: Don't configure unused SATA / USB portsFelix Singer
2020-09-06mb/system76/lemp9: enable I2C HID touchpadJeremy Soller
2020-09-06mb: remove duplicated Make code for spd.bin generationMichael Niewöhner
2020-09-06mb/system76/lemp9: Use absolute path for _GPEJeremy Soller
2020-09-06mb/system76/lemp9: Drop DeepSx settingsJeremy Soller
2020-09-06mb/system76/lemp9: Enable SA thermal deviceJeremy Soller
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
2020-09-05mb/system76/lemp9: Don't enable unused USB3 portFelix Singer
2020-09-04mb/*/Kconfig: Drop redundant 'select CPU_INTEL_HASWELL'Elyes HAOUAS
2020-09-04soc/intel/cnl: Enable HECI3 depending on devicetreeFelix Singer
2020-09-04mb/google/volteer/variant/lindar: Update memory settingsRasheed Hsueh
2020-09-03soc/intel/cnl: Add new Kconfig option which matches its FSPs nameFelix Singer
2020-09-03mb/google/volteer/variants/volteer: route GPP_F14 via APICAlex Levin
2020-09-03mb/google/zork: update DRAM table for berknipKevin Chiu
2020-09-03trogdor: Assert EN_PP3300_HUBJulius Werner
2020-09-03trogdor: Shuffle RAM and SKU ID pins (again)Julius Werner
2020-09-02mb/google/puff/var/noibat: Update DPTF parameters for noibatWisley Chen
2020-09-02mb/google/puff: Update DPTF parameters and TCC offset for faffyDavid Wu
2020-09-02mb/*/Kconfig: Drop redundant 'select DRIVERS_INTEL_WIFI'Elyes HAOUAS
2020-09-02Revert "mb/google/volteer/variant/lindar: Update memory settings."Patrick Georgi
2020-09-02mb/google/volteer/variant/lindar: Update memory settings.rasheed.hsueh
2020-09-02mb/google/poppy/var/rammus: Update SPD table for RammusKane Chen
2020-09-02mb/google/sarien/Kconfig: Drop redundant 'select TPM2'Elyes HAOUAS
2020-09-02src: Drop redundant 'select BOOTBLOCK_CONSOLE'Elyes HAOUAS
2020-09-02mb/*/Kconfig: Drop redundant 'select GENERATE_SMBIOS_TABLES'Elyes HAOUAS
2020-09-02mb/google/kukui: Add LPDDR4X support for fennel/cerise/sternxuxinxiong
2020-09-01mb/*/Kconfig: Drop redundant 'select CONSOLE_SERIAL'Elyes HAOUAS
2020-09-01mb/google/puff: Update DPTF parameters for kaisa and duffyDavid Wu
2020-09-01{include,mb,soc,sb,vendorcode}: Make hexadecimal notation consistentSubrata Banik
2020-09-01mb/google/puff: Convert ASL file to new DPTF dt implEdward O'Callaghan
2020-08-31mb/google/zork: Fix SPD typo in trembyle makefileRob Barnes
2020-08-31mb/google/zork: Fix active polarity of REPORT_EN pin in overridetreeFurquan Shaikh
2020-08-31mb/google/zork: Fix active polarity of touchscreen reset GPIO in overridetreeFurquan Shaikh
2020-08-31mainboard/intel/tigerlake: Update SPD files for TGL-UP3 RVPShreesh Chhabbi
2020-08-31mb/google/dedede/var/drawcia: Add elan USI touchscreenWisley Chen
2020-08-31mb/amd/mandolin: move PCIe GPP clock setting to devicetreeFelix Held
2020-08-31mb/google/zork/dalboz: move PCIe GPP clock setting to devicetreeFelix Held
2020-08-31mb/google/zork/trembyle: add PCIe GPP clock setting to devicetreeFelix Held
2020-08-31mb/google/zork: update GPIO config for dirinbozKevin Chiu
2020-08-31mb/google/zork: update GPIO config for berknipKevin Chiu
2020-08-31mb/google/volteer: Add probed fw_configs to SMBIOS OEM stringsTim Wawrzynczak
2020-08-31mb/pcengines/apu2/mainboard.c: Use 'PCI_BASE_ADDRESS_0' instead of magic numberElyes HAOUAS
2020-08-31mb/pcengines/apu1/mainboard.c: Use 'PCI_BASE_ADDRESS_2' instead of magic numberElyes HAOUAS
2020-08-31mb/google/volteer: add GPP_F11 to baseboard gpio_tableNick Vaccaro
2020-08-31mb/google/volteer: add generic DDR4 SPDs for EldridNick Vaccaro
2020-08-31mb/biostar: Drop unneeded empty linesElyes HAOUAS
2020-08-31mb/amd: Drop unneeded empty linesElyes HAOUAS
2020-08-31mb/google/volteer/var/halvor: Update TBT2 setting for HalvorFrank Wu
2020-08-31mb/google/puff: Set TCC offset to 5 for kaisa and duffyDavid Wu
2020-08-30mb/system76/lemp9: gpio: add a pull-down for MODEM_CLKREQ / CNVI_CLKREQMichael Niewöhner
2020-08-30mb/system76/lemp9: add wifi devicesMichael Niewöhner
2020-08-30mb/system76/lemp9: gpio: rework commentsMichael Niewöhner
2020-08-30mb/system76/lemp9: gpio: convert PAD_CFG_TERM_GPO to PAD_CFG_GPOMichael Niewöhner
2020-08-30mb/system76/lemp9: gpio: disable unused pad for INTP_OUTMichael Niewöhner
2020-08-30mb/system76/lemp9: gpio: disable internal SATAXPCIE pull-upsMichael Niewöhner
2020-08-30mb/system76/lemp9: gpio: configure unused padsMichael Niewöhner
2020-08-30mb/google/volteer: Update flashmap descriptor for CSE Lite FW updateJamie Ryu
2020-08-30mb/system76/lemp9: enable TPMMichael Niewöhner
2020-08-30mb/google/kukui: Add LPDDR4X Samsung K4UBE3D4AA-MGCR 4GB support for burnet/e...Kevin Chiu
2020-08-28mb/google/zork: Modify USI_RESET_L GPIO 140 to be active to lowKane Chen
2020-08-28mb/google/zork: Disable SATA device for all Zork platforms to save powerMatt Papageorge
2020-08-28mb/ocp/deltalake: Configure FSP DCI via VPDJohnny Lin
2020-08-28mb/google/zork/woomax: Remove unused memory partsRob Barnes
2020-08-28mb/google/zork/berknip: Remove unused memory part IDsRob Barnes
2020-08-28mb/google/zork/dirinboz: Remove unused memory part IDsRob Barnes
2020-08-28mb/google/zork: Switch zork to use spd_toolsRob Barnes
2020-08-28mb/google/volteer: add initial SPDs for Elemi variantNick Vaccaro
2020-08-28util: Add memory parts needed by zork boardsRob Barnes
2020-08-28mb/google/volteer: update Delbin SPD for H9HCNNNCPMMLXR-NEENick Vaccaro
2020-08-28util: rename lp4x spds to include "lp4x-" in nameNick Vaccaro
2020-08-28util: volteer/dedede: move generic SPDs to common locationNick Vaccaro
2020-08-27mb/google/volteer*: Enable IPURavi Sarawadi
2020-08-27mb/google/puff: Update psyspl2 to 97% of adapter ratingDavid Wu
2020-08-26mb/google/zork: meet SAR depedenciesAaron Durbin
2020-08-26mainboard/hp: Add ProBook 6360bPablo Stebler
2020-08-26mb/google/volteer/variant/lindar: Update gpio and devicetree settingsJulia Tsai
2020-08-26mb/google/asurada: Load dram params from sdram configHuayang Duan
2020-08-26mb/google/deltaur: Make return values non-constJacob Garber
2020-08-26mb/google/zork: add TS/TP support for dirinbozKevin Chiu
2020-08-26mb/google/volteer/var/halvor: Update USB relevant GPIO settingsEric Lai
2020-08-26mb/intel/jasperlake_rvp: Configure GPIO pad to enable I2C4Sugnan Prabhu S
2020-08-26mb/intel/jasperlake_rvp: Enable I2C4 for UFCSugnan Prabhu S