summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2023-06-07mb/google/myst: Correct CROS_WP_GPIO to active highEric Lai
HW has invert the signal, set it to active high. BUG=b:285964562 TEST=check crossystem wpsw_cur change as expected. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I54c578e5df5f1b24743cc9506e1e31b0b18bfb25 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75628 Reviewed-by: Jon Murphy <jpmurphy@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-06-07mb/google/myst: Enable USB WWANEric Lai
Add usb wwan device tree entry. Also set wwan_rst to high due to HW design active high. BUG=b:285792436 TEST=check FM101 is detected by Linux kernel. Bus 002 Device 002: ID 2cb7:01a2 Fibocom Wireless Inc. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I0aa60cb284d4b7f99e16643a92ee58467a355026 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75660 Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07mb/google/myst: Enable fingerprint on UARTEric Lai
Add fingerprint into device tree. Also set RST to low per HW requirement. BUG=b:285799911 TEST=check ectool --name=cros_fp version. RO version: bloonchipper_v2.0.5938-197506c1 RO cros fwid: CROS_FWID_MISSING RW version: bloonchipper_v2.0.14348-e5fb0b9 RW cros fwid: bloonchipper_14931.0.0 Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I09819037b80e55edeb56faef9e27fe0753748efc Reviewed-on: https://review.coreboot.org/c/coreboot/+/75629 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07mb/google/brya/var/redrix: Add new GFX device with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot BRANCH=firmware-brya-14505.B Change-Id: Ia083617c58d6b7ebc108e07e29a1c8061580eae5 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-07mb/google/rex/variants/ovis: Add SSD card configJakub Czapiga
BUG=b:274421383 TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis Change-Id: I3795313e784595ac02ee2a38f466bcb9e613a6a4 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75576 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jan Dabros <dabros@google.com>
2023-06-07mb/google/rex/variants/ovis: Add I2C configJakub Czapiga
BUG=b:274421383 TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I1644b1d8f49accbb2ea68e236534df80a5151360 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75503 Reviewed-by: Jan Dabros <dabros@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-07mb/google/rex/variants/ovis: Add GPIO configurationJakub Czapiga
Based on Platform Mapping Document for Ovis (go/ovis_mapping_doc) state for June 6, 2023 (Rev 0.3) BUG=b:274421383 TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis Change-Id: Iae3ca243a245928e8ec3d48877cf578843922fc7 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75502 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07mb/google/nissa/var/joxer: disable PCIE RP7Mark Hsieh
joxer removed SD card from all SKUs, thus disable pcie_rp7. BUG=b:285477026 TEST=USE="project_joxer emerge-nissa coreboot" Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I3486d665ddb1de521ab4e656addb2209055174c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75658 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07mb/google/nissa/var/joxer: Remove VBOOT_GSC_BOARD_ID configReka Norman
Board IDs are now filled in as part of the signing process, so we don't need to set them in coreboot. BUG=b:240620735 TEST=Build and check VBOOT_GSC_BOARD_ID is set to ZZCR. Change-Id: I7dda8ad59046a1dd9a28595e037eda86e91c98df Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75641 Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-06mb/google/rex/var/rex0: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-rex coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: I193b95e8bd8ae538c4f25fbe772b174ef455d744 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-06mb/google/kukui: Change Juniper/Willow RAM table offset to 0x30Sheng-Liang Pan
All the DRAM module for Juniper/Willow can reuse the RAM ID in offset 0x30 table, so change Juniper/Willow RAM table offset to 0x30 for introducing more DRAM modules. BUG=b:284423187 BRANCH=kukui TEST=emerge-jacuzzi coreboot Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I92740275dcc27061a94b7db7ce095655c0bd7cf5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-06-06mb/google/nissa/var/uldren: Modify GPP_D7 and PCIE RP7Dtrain Hsu
Uldren does not have PCIE device and should disable PCIE RP7 and GPP_D7 for preventing PCIe controller not power gate in S0ix. BUG=b:283735051 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage 1. PCIE RP7: cbmem -c | grep 'PCI: 00:1c.6' [SPEW ] PCI: 00:1c.6: enabled 0 [SPEW ] PCI: 00:1c.6: enabled 0 2. GPP_D7: iotools mmio_read32 0xfd6d0ab0 0x44000300 Change-Id: Ia8a2c0f5530c7a056e8d706c651cac1d49b2091c Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75644 Reviewed-by: Harsha B R <harsha.b.r@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-06-06mb/google/rex/variants/ovis: Add RAM IDsJakub Czapiga
BUG=b:274421383 TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis Change-Id: Ic555fac846ebf1e9dad81b5847334c03d6804b5b Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-06mb/google/rex: Create ovis variantJakub Czapiga
BUG=b:274421383 TEST=util/abuild/abuild -p none -t google/rex -x -a ; Make sure GOOGLE_OVIS built successfully Change-Id: I5c8f290cfdcb4d47c0e5e9d72c1e34073b957681 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75385 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-06mb/google/corsola/var/starmie: Add K&D-ILI9882T panel supportRuihai Zhou
The K&D-ILI9882T panel and STA-ILI9882T share all DCS commands and EDID information except for the manufacturer_name which has no effect to the function of panel. Let's reuse the STA_ILI9882T struct in this case. BUG=None TEST=emerge-staryu coreboot chromeos-bootimage and boot the panel Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: I510462a49d273f3d25158b25906d4c514f855cdf Reviewed-on: https://review.coreboot.org/c/coreboot/+/75479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-06-06mb/google/geralt: Fix MIPI panel power on/off sequenceRuihai Zhou
Based on the power sequence of the panel [1], the power on T2 sequence VSP to VSN should be larger than 1ms, and the power off T2 sequence VSP to VSN should be larger than 0ms. We modify the power sequence to meet the datasheet requirement. [1] B5 TV110C9M-LL0 Product Specification Rev.P0 Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: I4ccb5be04062a0516f84a054ff3f40afbf5279be Reviewed-on: https://review.coreboot.org/c/coreboot/+/75512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-06-06mb/google/rex/var/rex0: probe for i2c1 touchscreenEran Mitrani
Touchscreen may either use I2C1 or SPI0. FW_CONFIG.TOUCHSCREEN is set to determine which is used. This CL adds a probe to enable I2C1. BUG=b:278783755 TEST=Tested on rex, confimed i2c1 is disabled when TOUCHSCREEN != TOUCHSCREEN_I2C Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: I0bee176298fddd2aee35cf084db037a3ce7672f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-06soc/amd/phoenix: Update USB device aliasEric Lai
Follow 57263_FP8_MBDG_rev_0_92 Table.57 to update the alias. We can match the schematic for now. BUG=b:285793461 TEST=USB still works. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Id1058279fe5b0e3131608a0b9bbd708dbbde7e87 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-06-06mb/google/nissa/var/joxer: add lp5x SPDs for JoxerMark Hsieh
Add Makefile.inc to include four LPDDR5x SPDs for the following parts for Joxer: DRAM Part Name ID to assign K3KL6L60GM-MGCT 3 (0011) H58G56BK7BX068 4 (0100) MT62F1G32D2DS-026 WT:B 4 (0100) K3KL8L80CM-MGCT 4 (0100) BUG=b:236576115 TEST=USE="project_joxer emerge-nissa coreboot" Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ibdc89c882581cfe4e5978faf4c6f70d653e0813d Reviewed-on: https://review.coreboot.org/c/coreboot/+/75610 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-04mb/google/rex: add macro for touchscreen IRQEran Mitrani
BUG=b:278783755 Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: I2a6de778c7ab30a9946e100cb70c092ba98496e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74944 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-04mb/google/brya/var/taeko: Fix PLD group orderWon Chung
Ensure USB-C ports' _PLD group numbers appear in order. get_usb_port_references in src/ec/google/chromeec/ec_acpi.c uses group token to match with the Type-C port number. BUG=b:216490477 TEST=build coreboot and system boot into OS. BRANCH=firmware-brya-14505.B Change-Id: I5c0395d33ee47ab1c7d45f33d6afb063b8263836 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75572 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-04mb/google/brya/var/marasov: Fix PLD group orderWon Chung
Ensure USB-C ports' _PLD group numbers appear in order. get_usb_port_references in src/ec/google/chromeec/ec_acpi.c uses group token to match with the Type-C port number. BUG=b:216490477 TEST=build coreboot and system boot into OS. BRANCH=firmware-brya-14505.B Change-Id: I51ff0991565d60807c100b33fb66ab10cc48b8e1 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-04mb/google/brya/var/constitution: Fix PLD group orderWon Chung
Ensure USB-C ports' _PLD group numbers appear in order. get_usb_port_references in src/ec/google/chromeec/ec_acpi.c uses group token to match with the Type-C port number. BUG=b:216490477 TEST=build coreboot and system boot into OS. BRANCH=firmware-brya-14505.B Change-Id: Ib564ffe272e73f46ec6608420dc431c8b017fb65 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-04mb/google/brya/var/kuldax: use RPL FSP headersDavid Wu
Select SOC_INTEL_RAPTORLAKE for kuldax so that it will use the RPL FSP headers for kuldax. BUG=b:285406822 BRANCH=firmware-brya-14505.B TEST="FW_NAME=kuldax emerge-brask coreboot-private-files-baseboard-brya coreboot chromeos-bootimage" Cq-Depend: chromium:4583807, chrome-internal:6003096 Change-Id: Icbf8b26bc2bfee2559cce236bde80a99f8bff859 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75599 Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-06-04mb/google/brya/var/kuldax: Enable Fast VMode for kuldaxDavid Wu
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP threshold. BUG=b:285406822 BRANCH=firmware-brya-14505.B TEST=Verify that the feature is enabled by reading from fsp log Change-Id: I9ae58d704cba8124c6cb9865431aff84c9d154f7 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75600 Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-06-04mb/google/myst: Add USB configJon Murphy
Add the phoenix usb config struct for Myst since the FSP has been updated to accept the config from coreboot and the default values do not work. BUG=None TEST=Boot to OS on Myst, verify devices are seen with lsusb Change-Id: I329aba80f3003a3a5f343b8dcc3efa8502b98e24 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-06-04mb/google/rex: Enable ISH supportBernardo Perez Priego
Enable ISH based on FW_CONFIG obtained from EC CBI. This is useful in case device is a tablet and motion sensors are handled by ISH instead of EC. BUG=b:280329972,b:283023296 TEST= Set bit 21 of FW_CONFIG with CBI Boot rex board Check that ISH is enabled and loaded Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Ibe0e1b8ce2c9b08ac6b1e6fef9bd19afc9b4f59f Reviewed-on: https://review.coreboot.org/c/coreboot/+/75039 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-04mb/google/rex,screebo: Update GPIO PAD IO Standby StateBora Guvendik
Fix for the "Onboard Keyboard and Type-C ports are not working after resuming from powerd_dbus_suspend" issue. This issue was caused since FSP 3165 FSP was fixed and started skipping GpioConfigureIoStandbyState programming when GpioOverride UPD is enabled. This patch moves the IO Standby State programming that FSP was doing to coreboot. BUG=b:284264580 TEST=Boot to OS, compare gpio pins, verify keyboard / Type-C Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: If96c1e71fdde784a55fe079875915ffa5a4f548a Reviewed-on: https://review.coreboot.org/c/coreboot/+/75555 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-04mb/google/rex/var/screebo: Add devicetree for support audioRui Zhou
Add devicetree config for ALC1019_ALC5682I_I2S BUG=b:278169268 TEST=emerge-rex coreboot and verified on screebo Change-Id: I2814cc76aff43daf0353cfef41592591bbe3d213 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-by: Mac Chiang <mac.chiang@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-04mb/google/myst: Add PCIe shutdown workaroundJon Murphy
On Myst, the FSP is shutting down the PCIe lanes that the SSD is on. Enable hotplug to force the FSP to keep the lanes active. BUG=b:284213391 TEST=Boot to OS Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Iaf0aca329f05f15a3ce9edfa6a0e782c2edccabe Reviewed-on: https://review.coreboot.org/c/coreboot/+/75583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-06-04mb/google/myst: Enable S0ixJon Murphy
Enable s0ix on Myst. BUG=b:277215113 TEST=builds Change-Id: I3cabc2c3ba75f4490da18b861ef2b82ce240860d Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74279 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-04mb/intel/mtlrvp: Select SOC_INTEL_METEORLAKE_U_PSubrata Banik
Intel/MTLRVP is built with Intel Meteor Lake-U SoC, so select it. Currently, there is no functional difference, but in the future FSP UPD parameters can be overridden properly. BUG=b:276697173 TEST=Able to build and boot intel/mtlrvp. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8b1dec47ef9d12ac50317b86c4f0bc5fbe4e4dc3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75607 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-04mb/google/rex: Select SOC_INTEL_METEORLAKE_U_PSubrata Banik
Google/Rex is built with Intel Meteor Lake-U SoC, so select it. Currently, there is no functional difference, but in the future FSP UPD parameters can be overridden properly. BUG=b:276697173 TEST=Able to build and boot google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4c233e0a8ce58998dc1a0379662e386f9b3d0073 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75612 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-03mb/google/rex: Create karis variantTyler Wang
Create the karis variant of the rex0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:285195072 TEST=util/abuild/abuild -p none -t google/rex -x -a make sure the build includes GOOGLE_KARIS Change-Id: I16d8b43390401789b87a6233238e37f32a17b46b Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-03mb/google/brya/var/anahera: Generate RAM ID for K4UCE3Q4AB-MGCLWisley Chen
Generate RAM ID for Samsung K4UCE3Q4AB-MGCL DRAM Part Name ID to assign K4UCE3Q4AB-MGCL 3 (0011) BUG=b:281950933 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: I75818b8a34d010fc0efe90c7625162e40e3b0dca Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-03mb/google/brya/var/redrix: Generate RAM ID for K4UCE3Q4AB-MGCLWisley Chen
Generate RAM ID for Samsung K4UCE3Q4AB-MGCL DRAM Part Name ID to assign K4UCE3Q4AB-MGCL 3 (0011) BUG=b:281943392 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: I79b29b1195468272c7f64a0eeb15d032eff8c1d3 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-03mb/starlabs/starbook: Fix the ramtop CMOS entrySean Rhodes
The ramtop entry has to be 10 bytes long, and it was incorrectly set to 10 bits, instead of 10 bytes. Change this to 80. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I506f9d98a389dd859038fd270c5e344b65f514f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75420 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-02soc/intel/apollolake: Switch to snake case for SataPortsEnableMario Scheithauer
For a unification of the naming convension, change from pascal case to snake case style for parameter 'SataPortsEnable'. Change-Id: I0df35125360eb42a03d5445011d72842cb2b8d7e Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75553 Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-06-02mb/google/rex/variants/screebo: add FW_CONFIG for audio/DBSimon Zhou
This patch adds FW_CONFIG to accommodate different Screebo BOM components across various SKUs. 1. DB_CONFIG for DB_TPEC/DB_TBT/DB_UNKOWN 2. AUDIO for ALC1019_ALC5682I_I2S/AUDIO_UNKNOWN BUG=b:278169268 TEST=build pass Change-Id: I928aae61d4936509a7b68f4041c0cd72f298e83d Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Mac Chiang <mac.chiang@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-01mb/google/myst: Add ELAN touch screenEric Lai
Follow the eKTH7B18U_Product_Spec_V1.1 to add the device. BUG=b:284381267 TEST=Check touch screen can detect in coreboot. [INFO ] \_SB.I2C1.H010: ELAN Touchscreen at I2C: 02:10 Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I4bd521410953892a477020a872de0d882001b178 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2023-06-01mb/google/myst: Add ELAN touch padEric Lai
Follow the data sheet SA577C-12C0, Rev. 1.1 to add the device. BUG=b:284381266 TEST=check touch pad can detect in coreboot. [INFO ] \_SB.I2C0.D015: ELAN Touchpad at I2C: 01:15 Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I0eb0ee1e6cb9c15bfe3964af6ce2ed02eee370a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2023-06-01mb/google/myst: Add codec RTL5682 and amp RTL1019Eric Lai
Follow the schematic_0502 to add the audio codec and amp. BUG=b:270109435 TEST=Check device can detect in coreboot. [INFO ] \_SB.I2C3.RT58: Realtek RT5682 at I2C: 04:1a [INFO ] \_SB.I2C3.D029: Realtek SPK AMP R at I2C: 04:29 [INFO ] \_SB.I2C3.D02A: Realtek SPK AMP L at I2C: 04:2a Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Icfec8d99be8fde986c5516e0c4cd50dae1edfa98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75477 Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-01mb/siemens/{mc_apl2,mc_apl5,mc_apl6}: Use SSD type for SATA portsMario Scheithauer
There are only SSD connected to SATA ports on this mainboard. To prevent misbehavior, set the correct hard drive type for enabled SATA ports. BUG=none TEST=Boot into OS and check the stability of the SSD Change-Id: I2c2b0548865e87859a1d742295e09a731bfb3f76 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-06-01mb/siemens/{mc_apl2,mc_apl5,mc_apl6}: Limit SATA speed to Gen 2Mario Scheithauer
Due to mainboard restrictions a SATA link at Gen 3 can cause issues as the margin is not big enough. Limit SATA speed to Gen 2 to achieve a more robust SATA connection. Change-Id: Ifdea4542836b9c75b5507324fbb06b9566a6fe1d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75365 Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-01mb/google/corsola: Fix MIPI panel power on/off sequenceRuihai Zhou
Based on the power sequence of the panel [1] and PMIC datasheet [2], the power on T2 sequence VSP to VSN should be large than 1ms, but it's -159us now, and the power off T2 sequence VSP to VSN should be large than 0ms, but it's less than 0 now. Let's modify the power sequence to meet the datasheet requirement. [1] HX83102-J02_Datasheet_v03.pdf [2] TPS65132-Single-Inductor-Dual-Output-Power-Supply.pdf BUG=b:282902297 TEST=power sequence T2 pass Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: Ib1625c6a211f849071393f69eaf5c649a8e7f72e Reviewed-on: https://review.coreboot.org/c/coreboot/+/75298 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-01mb/google/nissa/var/uldren: Add DPTF parametersDtrain Hsu
The DPTF parameters were verified by the thermal team. BUG=b:282598257 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I1f38ef52d3906960f8b692595fcc3b39bc000243 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2023-05-31mb/google/rex/var/screebo: Add MIPI camera devicejason.z.chen
Enabling MIPI UCAM for screebo project BUG=b:277883010 TEST=none Signed-off-by: jason.z.chen <jason.z.chen@intel.corp-partner.google.com> Change-Id: Id06e5c162d911a4bd78190757c25e7f760160a8f Reviewed-on: https://review.coreboot.org/c/coreboot/+/75157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-31mb/google/rex/var/screebo: Set TCC to 90°CWentao Qin
Set tcc_offset value to 20 in devicetree for Thermal Control Circuit (TCC) activation feature for proto phase. BUG=b:282865187 BRANCH=None TEST=Build FW and test on Screebo board Change-Id: I3a929aa20a700376d2a0a150911fed34e67f78eb Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75360 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-31mb/google/dedede/var/boxy: Fix filename "MakeFile.inc" to "Makefile.inc"Kevin Yang
Incorrect filename "MakeFile.inc" cause gpio.c can not be complied. Rename to "Makefile.inc" and confirm gpio.c can load correctly. BUG=b:281620454 BRANCH=dedede TEST=build and confirm gpio.c can be loaded Signed-off-by: Kevin Yang <kevin3.yang@lcfc.corp-partner.google.com> Change-Id: I39947c66de04695e5242ab1affc328894f34f9f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75520 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-31mb/google/rex: Move I2S config from common to boardKapil Porwal
Move I2S config from common to board. BUG=none TEST=Build google/rex Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I51ca902e9b0077d5d5cc9c3507d26301a0f61bc2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75513 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-31mb/google/rex: Enable SoundWire codecsKapil Porwal
Enable drivers for SoundWire codecs and define the topology in the devicetree for the rex0 variant with the SoundWire daughter board connected. +------------------+ +--------------------+ | | | Headphone Codec | | Intel Meteor Lake| +--->|Cirrus Logic CS42L42| | SoundWire | | | ID 0 | | Controller | | +--------------------+ | | | | Link 0 +----+ +-------------------+ | | | Left Speaker Amp | | Link 1 | +--->| Maxim MAX98363 | | | | | ID 0 | | Link 2 +----| +-------------------+ | | | | Link 3 | | +-------------------+ | | | | Right Speaker Amp | +------------------+ +--->| Maxim MAX98363 | | ID 1 | +-------------------+ This was tested by booting the firmware and dumping the SSDT table to ensure that all SoundWire ACPI devices are created as expected with the properties that are defined in coreboot under \_SB.PCI0: HDAS - Intel Meteor Lake HDA PCI device HDAS.SNDW - Intel Meteor Lake SoundWire Controller HDAS.SNDW.SW00 - Cirrus Logic CS42L42 - Headphone Codec HDAS.SNDW.SW20 - Maxim MAX98363 - Left Speaker Amp HDAS.SNDW.SW21 - Maxim MAX98363 - Right Speaker Amp BUG=b:269497731 TEST=Verified SSDT for SNDW in the OS. Playback and recording are also validated on google/rex. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I3e11dc642ff686ba7da23ed76332f7f10e60fade Reviewed-on: https://review.coreboot.org/c/coreboot/+/73280 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-31mb/google/brya/acpi: FBVDD_PWR_EN should be inverted on AgahTarun Tuli
The FBVDD_PWR_EN signal should be inverted in its control level on Agah v.s. Hades. The original change covered the Hades implementation, but needs to be updated to invert for Agah. This change can be removed once we drop support for Agah. BUG=b:280467267 TEST=built for Hades and Agah Change-Id: I7f90c03b8d9b859004e5c124bf0a1f7b59921c3d Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75530 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-31mb/google/nissa/var/uldren: Fine tune eMMC DLL settingsDtrain Hsu
Fine tune eMMC DLL settings based on Uldren board. BUG=b:280120229 TEST=executed 2500 cycles of cold boot successfully on all eMMC sku. Change-Id: I82a55a1fe17aa910eb02464df463603dcbbbef05 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75459 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Jamie Chen <jamie.chen@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-31mb/google/nissa/var/uldren: Add ACPI DmaProperty for WLAN deviceDtrain Hsu
Add ACPI DmaProperty for WLAN device. `is_untrusted` is eventually ended up by adding DMA property _DSD which is similar to what `add_acpi_dma_property` does for WWAN drivers, hence it makes sense to have a unified name across different device drivers. BUG=b:279676191 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I6d898a939aa0be31a671d2436a81c34f7a1ec030 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75460 Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-05-31mb/google/skyrim: Add common_config.acp_configTim Van Patten
Add 'common_config.acp_config' to the device tree, so we have the correct pin configuration. BUG=b:225320579 TEST=USE=fwconsole emerge-skyrim ... ; verify 'devbeep' works in depthcharge console TEST=Boot into ChromeOS, verify YouTube sound works with internal speakers and headphone jack TEST=Boot into ChromeOS, verify microphone with Google Meet Change-Id: Ie2d79408104273d8a53214b683800fa0663c14d3 Signed-off-by: Tim Van Patten <timvp@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-05-31mb/msi/ms7d25: Add console die notificationMichał Żygowski
Add beeps and blink SATA LED on critical errors. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I45b8b4fda00d58a1ab1d7dfab49d6f841bc0b000 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69821 Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-30mb/google/myst: Fix the DRAM Strap IDKarthikeyan Ramasubramanian
Incorrect memory part was used in CB:74745 to generate the DRAM Strap ID. Amend the memory_parts_used.txt and regenerate the DRAM Strap ID. BUG=b:272746814 TEST=Generate the DRAM Strap ID. Change-Id: I0668d7e02345610a11f9113d8bbe99a474f33f1a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2023-05-29mb/google/rex: Update GPIO PAD as per Proto 2 schematicsSubrata Banik
BUG=b:283477280 TEST=Able to build and boot google/rex as per Proto 2 schematics dated 05/16. +-----------------+------------------------------------+---------------------------+--------+ | GPIO | In Proto 1 | In Proto 2 | Impact | +-----------------+------------------------------------+---------------------------+--------+ | GPP_C01 | SOC_TCHSCR_RST_L | SOC_TCHSCR_RST_R_L | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_D19 | NC | EC_SOC_REC_SWITCH_ODL | Y | +-----------------+------------------------------------+---------------------------+--------+ | GPP_E04 | HPS_INT_L | SOC_PEN_DETECT | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_E17 | EN_HPS_PWR | EN_PP3300_SPARE_X | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_F13 | GSPI1_SOC_MISO | GSPI1_SOC_MISO_R | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_F21 | GPIO_F21_SPI_CS_L | SPI_SOC_CS_UWB_L_STRAP | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_H00 | GPIO_H00_SPI_CLK_R | SPI_SOC_CLK_UWB_STRAP_R | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_H01 | GPIO_H01_SPI_MOSI_R | SPI_SOC_DO_UWB_DI_STRAP_R | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_H02 | GPIO_H02_SPI_MISO | SPI_SOC_DI_UWB_DO_STRAP | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_S00 | UNNAMED_8_METEORLAKEU_I137_GPPS00 | SDW_HP_CLK_WLAN_PCM_CLK | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_S01 | UNNAMED_8_METEORLAKEU_I137_GPPS01 | SDW_HP_DATA_WLAN_PCM_SYNC | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_S02 | UNNAMED_8_METEORLAKEU_I137_GPPS02 | DMIC_SOC_CLK0_WLAN_PCM_OUT| N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_S03 | UNNAMED_8_METEORLAKEU_I137_GPPS03 | DMIC_SOC_DATA0_WLAN_PCM_IN| N | +-----------------+------------------------------------+---------------------------+--------+ Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4a8c43b0f845d3446188b7c926e482f91e5b45aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/75407 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-05-28mb/ibm: Add 4 SPR sockets server board IBM SBP1Patrick Rudolph
The IBM SBP1 is an evaluation platform. It's utilising: - 4 SPR sockets, having 16 DIMMs each - 240C/480T at maximum - 32x CPU PCIe slots - 2x M.2 PCH PCIe slots - Dual 200Gbit/s NIC - SPI TPM It has an AST2600 BMC for remote management. It doesn't have: - External facing USB ports - Video outputs - Audio codec Test: The board boots to Linux 5.15 with all 480 cores available. All PCIe devices are working and no errors in ACPI. All 64 memory DIMMS are working and M.2 devices can be used. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Change-Id: Ie21c744224e8d9e5232d63b8366d2981c9575d70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73392 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-27mb/google/rex: Update FMD to incorporate ISH firmwareSubrata Banik
This patch adds two new chromeos_*.fmd files for release and debug FSP builds targeting rex_ec_ish. `rex_ec_ish` variant would pack ISH firmware into the CSE boot partition hence, the blob size is expected to increase. Creates separate flash map layout to ensure ISH work is not impacting on the regular `rex0` project SPI flash usage. BUG=b:284254353 TEST=Able to build google/rex_ish_ec board and boot on target hardware. Change-Id: Ife4663d3ccf80a928646eadaac4c9ab49ad29055 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75471 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-27mb/google/rex: Create variant to support ISH enablementSubrata Banik
This patch creates a new variant to support the ISH enablement using Rex platform.The idea here is to leverage the `rex0` code as much as possible and add specific support for ISH enablement as per the hardware schematic differences. BUG=b:284254353 TEST=Able to build google/rex_ish_ec board and boot on target hardware. Change-Id: I625fd0b31aed998f4e8f2d139827bc212ee8a90b Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75470 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-26mb/google/rex/variants/baseboard/rex: Add CPU power limit valuesSumeet Pawnikar
Add support of variant_devtree_update() function to override devtree settings for variant boards. Also, add CPU power limit values for rex baseboard. BRANCH=None BUG=b:270664854 TEST=Built and verified power limit values as below log message for 15W SKU on Rex board. Overriding power limits PL1 (mW) (10000, 15000) PL2 (mW) (57000, 57000) PL4 (W) (114) Change-Id: If46445157358e3e0f227e26a35b4303fc9189a4b Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Harsha B R <harsha.b.r@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-26mb/google/rex: Set frequency and gears for SaGv pointsBora Guvendik
Restrict memory speed to 6400 MTS as per board design. BUG=b:282164577 TEST=Verified the settings on google/rex using debug FSP logs. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I3dec383c7c585b80a73089f3403011c5cda61f65 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-26mb/purism/librem_cnl: Enable Librem 14 jack detect with fixed ECJonathon Hall
Use verbs enabling jack detect if the EC firmware has been updated with fixed jack detection. Test: Build Librem 14 and boot with latest EC, test headset jack detection. Change-Id: I57a27b1d51e4f6c7c712bcb2823d21692b9c5ce6 Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74364 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-05-26mb/dell/e6400/acpi: Route Ricoh R5C847 PCI IRQ lines as DBCNicholas Chin
Based on the schematic and vendor ASL code, PCI interrupt lines ABC of the Ricoh R5C847 PC Card/Media Card/FireWire controller are routed DBC. From lspci and the schematic this chip is PCI device 1. The original config copied from the T400 was routed ABCD->BCDA, causing Linux to issue an "irq 18: nobody cared" message when inserting an SD card. This is fixed by this patch and the SD card now works properly. Change-Id: Iede1de72d5369f1aebbac170792733739add3431 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75411 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-05-26treewide: Remove 'extern' from functions declarationElyes Haouas
"extern" is automatically implied with function declaration. Change-Id: Ic40218acab5a009621b6882faacfcac800aaf0b9 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71890 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-05-26mb/google/nissa/var/uldren: Add fw_config probe for lteDtrain Hsu
Use fw_config to probe lte. BUG=b:283199751 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I5596f3536b0a21453f89e67615acabbbf6a8409b Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75337 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-26mb/google/nissa/var/uldren: Add fw_config probe for touchpadDtrain Hsu
Use fw_config to probe touchpad. BUG=b:283199751 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: Ib20abac74683c670c174821b821ede461dbb0163 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-05-26mb/google/rex/var/screebo: Enable touchpadZhongtian Wu
Enable touchpad for Google Screebo. BUG=b:278160238 BRANCH=none TEST=Build and boot to Google Screebo. Verify touchpad works. Change-Id: Ib83e5ef5ca497592f5a26aa1e85d793d06d9dd7f Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75412 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-25mb/google/skyrim/var/winterhold: Fix USB port register scopeMatt DeVillier
Commit f99d6700 ("mb/google/skyrim/var/winterhold: Fix USB port ACPI generation") fixed the USB-A ports being double-nested, but neglected to move the chip driver registers up into the correct scope. While the generated ACPI is still correct, fix the register scope anyway to avoid confusion. BUG=b:283778468 BRANCH=skyrim TEST=build/boot winterhold, dump ACPI, verify unchanged Change-Id: Ia9982fed0fe2093d787ee9506ac5bbadd6cc03f9 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75389 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-05-25mb/google/skyrim/var/markarth: Fix USB port register scopeMatt DeVillier
Commit d81ee3f1 ("mb/google/skyrim/var/markarth: Fix USB port ACPI generation") fixed the USB-A ports being double-nested, but neglected to move the chip driver registers up into the correct scope. While the generated ACPI is still correct, fix the register scope anyway to avoid confusion. BUG=b:283778468 BRANCH=skyrim TEST=build/boot markarth, dump ACPI, verify unchanged Change-Id: I5c1cd23c49b512f55e9e13b2164d30dfb7fb682d Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75388 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-05-25mb/google/skyrim/var/frostflow: Fix USB port register scopeMatt DeVillier
Commit a539893c ("mb/google/skyrim/var/frostflow: Fix USB port ACPI generation") fixed the USB-A ports being double-nested, but neglected to move the chip driver registers up into the correct scope. While the generated ACPI is still correct, fix the register scope anyway to avoid confusion. BUG=b:283778468 BRANCH=skyrim TEST=build/boot frostflow, dump ACPI, verify unchanged Change-Id: I3912fe1b7d3f2a07cb379928cd4f5d87100d3284 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75387 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-05-25mb/google/rex: Enable SaGvSubrata Banik
This patch overrides `SaGv` FSP-M UPD to enable SaGv feature to be able to train memory (DIMM) at different frequencies. On all latest Intel based platforms SaGv is expected to be enabled to support dynamic switching of memory operating frequency. BUG=b:267879107 TEST=Able to verify SaGv is enabled with 3 work point (0, 1 and 2) and MRC retraining takes around ~20ms extra compared to SaGv being disabled. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic680bfeab4dd285c0d3916ba5e917cc12bae3284 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73534 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-24mb/google/Screebo: Enable AUX DC biasing on C0Simon Zhou
SKU1A C0 has no redriver, so enable SBU muxing in the SoC. BUG=b:283044004 BRANCH=none TEST=Voltages are correct on the C0 and C1 AUX bias pins Change-Id: I18b4ade2c60c270855fb2e733a9201539e08d8ba Signed-off-by: mike <mike5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-24mb/google/rex/var/screebo: Add BT devicetree configqinwentao
Enabling BT for screebo project BUG=b:278169273 TEST=Check whether BT can connect to Bluetooth device Signed-off-by: qinwentao <qinwentao@huaqin.corp-partner.google.com> Change-Id: I0ecd62abfbe751e1036948b1490844e7e63d7f0d Signed-off-by: qinwentao <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75352 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-24mb/google/hades: Enable smbus in device treeEric Lai
Hades uses the SODIMM, enable the smbus to see the SPD address for the memory. BUG=b:283138024 TEST=i2cdetect -l can see the smubs adapter. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I3912a025afaf8388d04a4b08852a84d4a2a6bf06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75399 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-24mb/siemens/mc_ehl1: Enable pi608gp I2C driverJan Samek
Add devicetree and Kconfig entries to enable additional configuration of the Pericom PI7C9X2G608GP PCIe switch on this board variant. The amplitude is being adjusted to 425 mV and de-emphasis level to 6.0 mV. BUG=none TEST=Read out the PCIe config space values of the switch and check if they match with the ones configured over SMBus. Change-Id: I11459f0794278ad614aa6e16c56df1ad578fe2f8 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-05-24mb/siemens/mc_ehl4: Double payload size to 256 bytes for PCIe RP #2, #3Mario Scheithauer
To improve the rate of data transfer for PCIe root port #2 (00:1c.1) and root port #3 (00:1c.2) set the max payload size to 256 bytes for both root ports. Change-Id: I553f6cf090d799fbbaafb925646c6566d6951a86 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75127 Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-05-24mb/google/nissa/var/uldren: Add fw_config probe for touchscreenDtrain Hsu
Use fw_config to probe touchscreen. BUG=b:283199751 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I5d8129b3af3aa09e5bc31160de82d9ef7af0dd59 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-05-23mb/intel/archercity_crb: Add EWL Hob processing for MRC errorJohnny Lin
Override the weak function mainboard_ewl_check() and select OCP_EWL. Select IPMI_KCS_ROMSTAGE and IPMI_OCP for OCP IPMI commands which are needed for OCP EWL driver, but they are Meta-specific BMC commands and don't really work for AC, this change is just for a demonstration with AC. Note that FSP UPD promoteWarnings needs to be disabled so that FSP won't block and can return to coreboot for EWL processing when memory EWL type 3 error occurs. Tested=On Intel AC, connected with a faulty DIMM can see EWL type 3 error being generated and halted with coreboot log: [DEBUG] Number of EWL entries 3 [ERROR] EWL type: 3 size:32 severity level:1 [ERROR] Major Warning Code = 0x29, Minor Warning Code = 0x04, [ERROR] Major Checkpoint: 0xb7 [ERROR] Minor Checkpoint: 0x74 [ERROR] Socket 0 [ERROR] Channel 4 [ERROR] Dimm 0 [ERROR] Rank 0 [ERROR] IPMI: ipmi_get_board_config command failed (ret=3 resp=0xc1) [DEBUG] ipmi send memory training error [DEBUG] EWL type: 1 size:19 severity level:1 [DEBUG] 0x6392e968: 01 00 00 00 13 00 01 00 00 00 b7 74 0a 03 00 04 [DEBUG] 0x6392e978: 00 00 00 [DEBUG] EWL type: 1 size:19 severity level:1 [DEBUG] 0x6392e97b: 01 00 00 00 13 00 01 00 00 00 b7 74 0a 03 00 04 [DEBUG] 0x6392e98b: 00 00 01 [EMERG] Memory Training Error! Change-Id: I4602ae356aa6e55ed0611b8ac9a206db127c297c Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-05-23mb/google/skyrim/var/winterhold: Fix USB port ACPI generationMatt DeVillier
The overridetree definitions for the USB ports wrongly double-nested the ports, causing the generated SSDT to be incorrect, leading to an error in dmesg: ACPI BIOS error (bug): Could not resolve symbol \ [\_SB.PCI0.GP41.XHC1.RHUB.HS02.HS03], AE_NOT_FOUND BUG=b:283778468 BRANCH=skyrim TEST=untested, but same error/fix as frostflow variant. Change-Id: Ic498afcc8b8e0224f344f405e2f1ef6184df1d6b Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75340 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-05-23mb/google/skyrim/var/markarth: Fix USB port ACPI generationMatt DeVillier
The overridetree definitions for the USB ports wrongly double-nested the ports, causing the generated SSDT to be incorrect, leading to an error in dmesg: ACPI BIOS error (bug): Could not resolve symbol \ [\_SB.PCI0.GP41.XHC1.RHUB.HS02.HS03], AE_NOT_FOUND BUG=b:283778468 BRANCH=skyrim TEST=untested, but same error/fix as frostflow variant. Change-Id: Ie40541ada508acfa5771ea800249b8a57b168e3b Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75339 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-05-23mb/google/skyrim/var/frostflow: Fix USB port ACPI generationMatt DeVillier
The overridetree definitions for the USB ports wrongly double-nested the ports, causing the generated SSDT to be incorrect, leading to an error in dmesg: ACPI BIOS error (bug): Could not resolve symbol \ [\_SB.PCI0.GP41.XHC1.RHUB.HS02.HS03], AE_NOT_FOUND BUG=b:283778468 BRANCH=skyrim TEST=build/boot frostflow, verify error no longer present in dmesg. Change-Id: I0b87af6b2c04f9354e6f394a8f987fa660e49134 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75338 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-05-23mb/google/nissa/var/yavilla: Generate LP5 RAM ID for K3KL6L60GM-MGCTShon Wang
Generate the RAM ID for Samsung K3KL6L60GM-MGCT. DRAM Part Name ID to assign K3KL6L60GM-MGCT 6 (0110) BUG=b:273791621 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I05a2cd5f2235702dea8fd706349ebda6a9ffa2ef Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-05-23mb/starlabs/starbook: Add ramtop to CMOS layoutSean Rhodes
Add `ramtop` to CMOS layout so SOC_INTEL_COMMON_BASECODE_RAMTOP can be used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I88128d2c62bdc3246a3f30e768c353f0fe3faeb7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-05-23mb/google/rex: Add FW_CONFIG and device for VPUEran Mitrani
BUG=b:282912666 TEST=set and unset bit20 in HW_CONFIG and check if VPU(0b.0) is enabled when bit20 is set, and disabled when cleared Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: Iee6a9026a4d210407350bfb7ecc8a058e7ff5c24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-05-23mb/google/rex: Add FW_CONFIG for TOUCH over SPIEran Mitrani
TEST=set the corresponding cbi bit, and saw SPI0 under sysfs BUG=b:278783755 Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: I7099cde14cff90ad63e9164769f9913a8284a805 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-23mb/google/skyrim/var/markarth: Update DPTC and STT settingsJohn Su
According to Thermal table 0518, adjust DPTC and STT settings. BRANCH=none BUG=b:273636128 TEST=emerge-skyrim coreboot chromeos-bootimage Then the thermal team has verified. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Id1c1884eabc1ea58148270f39eaca836ccc3fb54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chao Gui <chaogui@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2023-05-22mb/amd/majolica: Add default setting PSP_INIT_ESPIZheng Bao
The board needs this setting to boot. Change-Id: I7f507c2478b63daf891430e95b008747b9b95a51 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-05-22mb/system76/rpl: Add Gazelle 18Tim Crawford
The Gazelle 18 (gaze18) is a Raptor Lake-H board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard - I2C HID touchpad - Both DIMM slots - M.2 NVMe SSD slot - M.2 SATA SSD slot - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.2.6 Not working: - Discrete/Hybrid graphics Change-Id: I4599bf12c0f3048f9328f336cc8971400f5fd1a0 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-05-22mb/google/nissa/var/pujjo: Add WWAN_5G power on sequenceLeo Chou
Pujjoteen5 support WWAN 5G device, use variant.c to handle the power on sequence. BUG=b:279835626 TEST=Build and check WWAN 5G power on sequence. Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I7dc72f2c705bcb41745f4bf08bef286773fe8b13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75327 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-22mb/google/nissa/var/yavilla: Config I2C frequencyTony Huang
Measured the I2C frequency meets spec 1. I2C0 (TPM): 976.1 Khz 2. I2C1 (TouchScreen); 394.0 Khz 3. I2C2 (WCAM); 377.9 Khz 4. I2C3 (Audio): 390.0 Khz 5. I2C5 (Touchpad): 389.3 Khz BUG=b:283374537 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot and check all I2C devices measurement result Change-Id: If6e3a4a2b1ac642561015a290e6579238c3c2b1b Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-05-22mb/google/skyrim: Enable DmaProperty on WLAN deviceMark Hasemeyer
Set the DmaProperty in the device's _DSD so that the OS can treat the device as untrusted. BUG=b:278310256 TEST=cat /sys/bus/pci/devices/<wifi>/untrusted == 1 iperf3 -c <iperf3-server> -t 60 (No performance regressions seen) Change-Id: I06369a19afa5b881b26f5c1eb243e2db41a9bb36 Signed-off-by: Mark Hasemeyer <markhas@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75095 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2023-05-22mb/msi/ms7d25: Re-enable GpioOverrideMichał Żygowski
Set all GPIOs to their target functions and do not depend on FSP to configure them. The board support has stabilized and was tested with many PCIe devices. There is no need to detect CLKREQ signals so we may hardcode them. TEST=Boot MSI PRO Z690-A DDR4 to Linux and check if all ASPM and Clock PM features' state on PCIe root ports are the same before and after the change. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I01dc83ce23ca27525b8905665da942510f249824 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-05-22mb/google/corsola: Disable backlight before turning on bridgeRuihai Zhou
Disable backlight before turning on bridge, otherwise the bridge will initialize failed. Fixes: d5c1e1(mb/google/corsola: Add support for MIPI panel) Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: I7d10bf9e8675b2fb03bfd1e294af66207b9b0620 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75354 Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-05-22mb/google/rex/var/screebo: enable fingerprintSimon Zhou
BUG=b:278156430 TEST=verify the fingerprint on screebo Change-Id: I986e470b28145f7b17427e794055929a4283c721 Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75287 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dolan Liu <liuyong5@huaqin.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-22mb/google/hatch/jinlon: Add HID to gfx ACPI nodeKornel Dulęba
The upstream kernel privacy screen driver uses HID GOOG0010 to look for firmware node to use. This method is used on other boards, e.g. redrix. See: drivers/platform/chrome/chromeos_privacy_screen.c in linux sources. Update jinlon gfx ACPI node to work with that. BUG=b:279092050 TEST=privacy protection screen works with 5.15 and 4.19 kernels Change-Id: Icba41e7f2be7292f713fea10dbe69b3ca128bde7 Signed-off-by: Kornel Dulęba <korneld@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75289 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-05-22mb/google/nissa/var/yavilla: Disable unused gpio with fw_configRobert Chen
Disable unused gpio for LTE daughter board, WFC and stylus. BUG=b:277148122 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I6cc61321cd96a10dd34ff6cd9fcabe85a64bbfa9 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75293 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-22mb/msi/ms7d25: Disable PCIe hotplugMichał Żygowski
The support for the board has stabilized and PCIe ports have been tested with many devices. Although hotplug is not commonly used and it seems pointless to keep it enabled, so disable it. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I338c55cb57d971badd08235b71626a710fafb829 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-05-21mb/lenovo/x200: Add VBT files by defaultNico Huber
Select INTEL_GMA_HAVE_VBT so VBT files are added by default. This board has two specific VBT files that are hard-coded in the Makefile. Hence set an empty INTEL_GMA_VBT_FILE string. Change-Id: I0508c8016da06b401d6fbefd6e5cec1af018a5c8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>