summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-01-14/src/mb/google/poppy/variants/atlas: Revise SPK resetGaggery Tsai
This patch revises the pad reset config of speaker reset GPIO pin from RSMRST to PLTRST. Audio engineer suggested to reset the amps with warm reset. BUG=b:122441567 BRANCH=None TEST=warm & cold reset & suspend_stress_test -c 10 and ensure the speakers are working well. Change-Id: I87c554b186b068da93e1662a97afaf01dddae0ef Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/30866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-14mb/intel/coffeelake_rvp: Update mainboard UART KconfigWonkyu Kim
Update mainboard UART Kconfig for Whiskylake RVP. TEST=Build and test on Whiskylake RVP. By default we can still get console from cbmem, and enable CONSOLE_SERIAL can get logs from UART port2. Select other Coffeelake RVPs and check CONSOLE_SERIAL is enabled. Change-Id: Ic56c019a12b467e5bede5648098d3fb82b56ba7e Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-on: https://review.coreboot.org/c/30861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-14nb/intel/pineview: Move the boilerplate mainboard_romstage_entryArthur Heymans
The mainboard_romstage_entry function is mostly boilerplate, so move it to a common location and provide mainboard specific callbacks. Change-Id: I33cf1d6a60d272f490f41205ec725dee8b00242b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14mb/google/octopus/variants: Configure PLT_RST_L pad IOSSTATE maskedJohn Zhao
PLT_RST_L was asserted twice at boot-up and a glitch was observed when coming out of suspend mode. Configure PLT_RST_L pad IOSSTATE from HIZCRx1 to be masked. BRANCH=octopus BUG=b:117302959 TEST=Verified no glitch on PLT_RST_L at S3 and PLT_RST_L stays high 3.3v during S0ix. Change-Id: I8c23aadda72be54fb45e67aab2bc8ed51e473bae Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30815 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14mb/google/octopus/variants: Disable xHCI compliance modeJohn Zhao
Some usb devices exhibits signal loss which causes xHCI entering compliance mode. The resolution is to disable xHCI compliance mode. BRANCH=octopus BUG=b:115699781 TEST=Verified usb operation successfully. Change-Id: I41fecaa43f4b1588a0e4bbfc465d595feb54dd24 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30817 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14mb/google/hatch: Use USB2 Port 10 for BT over CnViAamir Bohra
Integrated BT controller in CnVi uses USB port 10 for communication. BUG=b:122552619 TEST=lsusb shows BT device Change-Id: Iad1ca0e9419b534f50a3ce3fdcbd660caf8efb5c Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30809 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14mb/lenovo/[xtz]60: Introduce and use RCBA64 macroPeter Lemenkov
Change-Id: I85ca631dfb01acb92dd1ac38dff07215114cab8c Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/30802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-14mb/lenovo/*/romstage: Use macros instead of magic numbersPeter Lemenkov
Apparently coreboot still uses magic numbers instead of macros in some Lenovo mainboards. Let's use macros instead. Note that IOTR[0123] is a 64-bit width variable. Change-Id: Icf185c77ede5a258fe37be9e772be6804d014b57 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-14sb/intel: Use common RCBA MACROsPeter Lemenkov
This commit follows up on commit 2e464cf3 with Change-Id I61fb3b01ff15ba2da2ee938addfa630c282c9870. Change-Id: Iaf06d347e2da5680816b17f49523ac1a687798ba Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: David Guckian Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-14soc/intel/fsp_broadwell_de: Move early_mainboard_romstage_entry()Patrick Rudolph
Move early_mainboard_romstage_entry before console_init. Allows to setup a SuperIO, if any, for serial console. Change-Id: I370263a6197a4c0c805352f07fedddbee1b8e247 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14AGESA binaryPI: Consolidate ACPI for IMCKyösti Mälkki
Change-Id: Ieff6041f3c9ad02f9cebae0ec83d0898abb0d601 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/18538 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14AGESA binaryPI: Remove unused IMC ACPI methods IMSP and IMWKKyösti Mälkki
Note that IMC must sleep while SPI writes are in progress. Instead of using these ACPI methods, flashrom currently does raw IO to achieve the same. Change-Id: Ifca4e8328c54d1074b4799ddecfece24607214db Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/18537 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14binaryPI: Remove ACPI for IMC we don't runKyösti Mälkki
IMC is used on some of the AMD reference designs, so do not touch them yet. Change-Id: I6a58ab53d4a800d4c0c2026e50826122ece2c59f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/21190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-01-14AGESA: Remove ACPI for IMC we don't runKyösti Mälkki
IMC is used on some of the AMD reference designs, so do not touch them yet. Change-Id: Iae21e0294f0155f07fb4f4348ebc5b3120d50fd1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/18536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-14AGESA/PI: replace HUDSON_DISABLE_IMC with HUDSON_IMC_ENABLEMike Banon
Only a few boards are using IMC for the onboard fan control, so regarding the availability of IMC selection it should be opt-in, not opt-out. Also, select HUDSON_IMC_ENABLE for Gizmo 2 because Gizmo 2 could use IMC for the onboard fan control. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I3590b13c3b155405d61e373daf1bd82ca8e3bd16 Reviewed-on: https://review.coreboot.org/c/30756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-13google/butterfly: correct northbridge selectionMatt DeVillier
butterfly is a Sandybridge device, and selecting Ivybridge breaks libgfxinit currently due to CPU mismatch Test: build/boot butterfly w/libgfxinit Change-Id: I1a7f5a3681d21a256834b11b545855c4365f5f78 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30820 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13google/butterfly: add cpu/gpu pwm backlight register valuesMatt DeVillier
Required for functional internal display on butterfly using libgfxinit. Test: boot/build butterfly, verify internal display functional prior to OS driver loading. Change-Id: Ib8060f2d1ad0694f0886d35c83763907f61b47b1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30819 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13{mb,nb,soc/fsp_baytrail}: Get rid of dump_mem()Elyes HAOUAS
Use hexdump() instead of dump_mem(). Change-Id: I7f6431bb2903a0d06f8ed0ada93aa3231a58eb6f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Guckian Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-13mb/google/kukui: add flapjack on top of kukuiYH Lin
Add placeholder for future flapjack additions/modifications. BUG=None BRANCH=kukui TEST=build with kukui/flapjack configurations Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: Ib9cd39e284f19b9179da73ed9f2b13d97442960e Reviewed-on: https://review.coreboot.org/c/30859 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13aopen/dxplplusu: Switch to C_ENVIRONMENT_BOOTBLOCKKyösti Mälkki
This board is the only user of these ancient chipsets, so we'll do all in one go. Also wipe out some extra headers. Change-Id: I22c172d577e6072562d8fcfa58145ec62473823e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-11soc/mainboard: Update mainboard UART KconfigLijian Zhao
After f5ca922 (Untangle CBFS microcode updates) got merged, all mainboard using intel apollolake, cannonlake, coffeelake, glk, kabylake, skylake, icelake and whiskeylake get affected. Using INTEL_LPSS_UART_FOR_CONSOLE instead of UART_DEBUG and set default console for each platform. BUG=N/A TEST=Build and test on Sarien platform, by default we can still get console from cbmem, and enable CONSOLE_SERIAL can get logs from UART port 2. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I550a00144cff21420537bb161c64e7a132c5d2de Reviewed-on: https://review.coreboot.org/c/30853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-11siemens/mc_apl1: Use INTEL_LPSS_UART_FOR_CONSOLEMario Scheithauer
With the commit a96e66a (soc/intel: Clean mess around UART_DEBUG), an adjustment is necessary for this mainboard. Change-Id: I0fb6288959f8bcb45c4cc93cc132f31a5ab2a5ad Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/30836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-10mainboard/google/octopus: configure EC_AP_INT_ODLJett Rink
Enable the EC_AP_INT_ODL interrupt on GPIO_134 for all octopus boards that support it. Also removing unnecessary IO standby support since we don't use this pin to wake up the SoC. BRANCH=octopus BUG=b:122552125,b:120679547 TEST=CTS tests with changes Change-Id: I018864ae5fa400372b5b443e49828e8202b9aa4d Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/30788 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10amdfam10 boards: Simplify early resourcemapKyösti Mälkki
Purpose of the table is to load initial address maps on PCI function 0:18.1. Provide a macro of its own so it is clear no other PCI devfn is accessed here. Change-Id: Ic146207580a5625c4f6799693157b02422bef00a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30783 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10amdfam10 boards: Drop extern on apicid_sp5100Kyösti Mälkki
The value get_bus_conf() initialises this value to is discarded. Change-Id: I8382861574e6f8ab52839169502a5af7c3742daa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10sb/intel/common: Show "Add EC firmware" only for boards that need itJan Tatje
Most boards currently do not use EC firmware from SPI flash in the IFD, this hides this option by default and shows it only for boards that need it. A new config variable MAINBOARD_USES_IFD_EC_REGION is introduced to enable this option for boards that need it. The following list of boards requiring this was provided by Lijian Zhao: 1. intel/cannonlake_rvp 2. intel/coffeelake_rvp 3. intel/icelake_rvp 4. google/sarien 5. google/hatch Change-Id: I52ab977319d99a23a5e982cc01479fe801e172a7 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/c/30697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-10google/kukui: Correct boardid sources and add sku_idHung-Te Lin
Kukui is going to use ADC#4 as SKU ID, and utilizing EC BoardID as global board_id (i.e., board revision). BUG=b:122060615 TEST=make; manually tested on Kukui P1 board. Change-Id: I7bba368c141a7ba6db11f24b8e8e7158f0fc729e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10google/kukui: Complete board ID ADC valuesHung-Te Lin
The ID from ADC on Kukui supports 16 different values and we should list all voltage values ahead. BUG=b:80501386 TEST=make; manually verified on Kukui P1 Change-Id: Ic3abe07abfe818ca68e180c262fd431d1167b801 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10google/kukui: Correct boardid init valuesHung-Te Lin
From `boardid.h`, the uninitialized ID values should be BOARD_ID_INIT instead of BOARD_ID_UNKNOWN. BUG=b:80501386 TEST=make; manually verified on Kukui P1 Change-Id: Ie5267e575e38b92ec64a7317defbd00ee153fa0a Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10mb/foxconn/g41s-k: Add g41m variantArthur Heymans
Was tested with the following: - 2 DIMM slots - USB - Ethernet NIC - automatic fan control - Libgfxinit with VGA, DVI (HDMI slot unpopulated) - PS2 Keyboard - SATA - PEG - S3 resume What does not work: - Using the second DIMM slot on a channel G41 can only handle 2 ranks per channel and on this mainboard 1 rank per DIMM slot. Supporting this would require too much raminit rework and is not worth it (at least for me) Change-Id: I67784038ef929f561b82365f00db70a69c024321 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10mb/google/sarien: Add PDR and RW_LEGACY_NVRAM to FMAPDuncan Laurie
1) Add a Platform Data Region called SI_PDR which is allocated in the flash descriptor for this platform 2) Add a DIAG_NVRAM region for use by the diagnostic payload for non-volatile storage. 3) Encapsulate both RW_LEGACY and DIAG_NVRAM in a region called RW_DIAG so it is clear they are associated. 4) Move the RW_DIAG region to the start of the RW region so that once we can re-enable a larger BIOS region this sub-region will be in the uncached area since it is not accessed on a normal boot. BUG=b:119435206 TEST=tested on Arcada board to ensure expected regions are present Change-Id: Ieb8bc4cf70d0a931e4944210112cfaf5c543f9f3 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-10mb: Move timestamp_add_now to northbridge x4xElyes HAOUAS
Change-Id: Iacbee658a4049e1c13a120dbc21425ffb6a1cabb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10mb/google/hatch: enable CPU cluster deviceAamir Bohra
Change-Id: I28c67fbdf2b4f371c4b533b64cad2c4376ca2bd2 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30785 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10aopen/dxplplusu: Move timestamps to common codeKyösti Mälkki
First initialisation is already in cpu/intel/car/romstage.c. Change-Id: If3e5068b4a9981354f0fca5fc12b6b81de1c8f4b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10mb: Move timestamp_add_now to northbridge/amd/amdfam10Elyes HAOUAS
Also remove some commented code. Change-Id: If2e91ad871b14b305e2181194d77b100e72f5763 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10mainboard/amd: Drop incorrect Kconfig selectKyösti Mälkki
Copy-paste from fam15. Change-Id: I87af312870063aaa498bbfc2f059f69dcdab0094 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09soc/intel: Clean mess around UART_DEBUGNico Huber
Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-09Veyron: fix sdram config for Hynix H9CCNNNBKTMLBR-NTDLoop_Wu
Sdram config sdram-lpddr3-hynix-4GB.inc for H9CCNNNBKTMLBR-NTD can't boot on Mickey. It's confirmed that the right config for Hynix H9CCNNNBKTMLBR-NTD is sdram-lpddr3-hynix-2GB-BK.inc. BUG=b:122239609 BRANCH=master TEST=boot on mickey Change-Id: Ifeaadda50d939e0c118cb7fe3964dcd08b709c2a Signed-off-by: Loop_Wu <Loop_Wu@asus.com> Reviewed-on: https://review.coreboot.org/c/30761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-09amdfam10 boards: Use smp_write_pci_intsrc()Kyösti Mälkki
Radically reduces line lengths and splits '(bus<<2) | INT' to separate parameters. Change-Id: I6c924a70d00a9139719f8078bbf1e4d04b576324 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09mainboard/h8scm_fam10: Use apicid_sr5650Kyösti Mälkki
Do this for consistency and to ease further bulk-sed work on those lines. Change-Id: Ic9706de4278d163d1ba0c0706ec5d4c6c87ffa45 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09amdfam10 boards: Use PCI_DEVFN()Kyösti Mälkki
Change-Id: I7b9aeaaa1cfa20efc9d187d91ece4eb9ee659c3f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09mb/intel/kblrvp: Add helper function to get Board IdPraveen hodagatta pranesh
Add 2 helper function get_board_id() & get_spd_index() to read board id & spd index from EC. Rename the old get_board_id() function to get_ec_boardinfo(). BUG=None TEST= Tested on KBL RVP11, able to read the Board id (0x44) and verified in serial logs. not verified on KBL RVP8. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: Ie20bf0d45a3568c2c433e5b844bea86aac07c47d Reviewed-on: https://review.coreboot.org/c/30306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-09mb/intel/kblrvp: Enable overridetree support for variantsPraveen hodagatta pranesh
This patch add devicetree.cb in baseboard and overridetree.cb for RVP3, RVP7 and RVP8 variants. BUG= None TEST= build with BUILD_TIMELESS=1, static.c remains same on before & after enabling overridetree. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: Ib7d492e2a92aed10ad0426d57640d0ed56733847 Reviewed-on: https://review.coreboot.org/c/30623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09cpu/intel: Use the common code to initialize the romstage timestampsArthur Heymans
The initial timestamps are now pushed on the stack when entering the romstage C code. Tested on Asus P5QC. Change-Id: I88e972caafff5c53d8e68e85415f920c7341b92d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-09mb/google/hatch: Disable the SA IPU for hatchV Sowmya
This patch disables the SA IPU for hatch since it is not using the IPU. Change-Id: Ib2afc4cc4fd7ef98365b0b98130b0e8bc757ac2a Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-09google/kukui: Enable VBOOT_VBNV_FLASH to store VBNV in flashTristan Shieh
Reading nvdata from non-volatile flash storage. With this patch, it will pass the firmware test that corrupts FW_MAIN_A and boots up with FW_MAIN_B. BUG=b:80501386 BRANCH=none Test=test_that --board=kukui 172.23.213.147 firmware_CorruptFwSigA Change-Id: I9ef6bff019ee986ff018202bfd4d4a875526ec6c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/30701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-08samsung/lumpy: add cpu/gpu pwm backlight register valuesMatt DeVillier
Required for functional internal display on lumpy using libgfxinit or Tianocore GOP driver Test: boot/build lumpy, verify internal display functional prior to OS driver loading. Change-Id: If62a4ae58082548e8a645d1a2de40705bdd2946e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-08mb/google/sarien: Set minimum assertion width valuesDuncan Laurie
Explicitly configure the minimum assertion width values to ensure that they are set as expected and are not using unknown defaults. Change-Id: I9a88e5b6002137df6e572b84d0de8a69522938f9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08mb/google/sarien: Enable recovery mode GPIODuncan Laurie
Enable the active-low recovery mode GPIO now that new boards are available which have an external pull-up instead of a pull-down so it can be asserted properly by servo. This was tested on a Sarien system by holding the recovery button on the servo board and tapping the cold reset button and ensuring that it enters recovery mode. Change-Id: I3216580bc94de71b05bf9382f15d0c4d428cb9fa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08mb/google/sarien: Remove power button ACPI deviceDuncan Laurie
These platforms use the standard fixed function power button and do not need a second power button device declared or the kernel will end up with two devices reporting the same event. Change-Id: I6fe2b201a6a6f6307a0c4bd6a61f56cfcdd88bf4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08sb/intel/i82801gx: Autodisable functions based on devicetreeArthur Heymans
This removes the need to synchronize the devicetree and the romstage writing to FD. Change-Id: I83576599538a02d295fe00b35826f98d8c97d1cf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30244 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-08mb/{d41s,d510mo}: Remove references to PCIe port 5 and 6Arthur Heymans
The southbridge has the function disable bits for port 5 and 6 strapped RO to 1 (disable). Change-Id: I2948935d42b9031d61f9e5b3f06b769e68f5a042 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-08mb/{ga-g41m-es2l,d945gclf,rk886ex}: Fix devicetreeArthur Heymans
The devicetree was synced incorrectly with respect to the function disable register set in romstage. Change-Id: I189c5fdc433b5577ae008abf42878cdc6e3f2d52 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30711 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07nb/intel/gm45: Remove the C native graphic initArthur Heymans
Libgfxinit provides a better alternative to the native C init. While libgfxinit mandates an ada compiler, we want to encourage use of it since it is in much better shape and is actually maintained. This way libgfxinit also gets build-tested by Jenkins. Change-Id: I540cf08cef6ff7825694ebfa36e2e6437916e657 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/27016 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07mb/google/hatch: Enable touch panel supportMaulik V Vaghela
Following changes are done to enable touch screen support on hatch 1. Enable I2C1 device at 400Khz at 3.3V 2. Configure GPIO for touch screen 3. Add ACPI entry for ELAN touch panel 4. update GPIO table with not connected GPIO pins for panel BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I8dab07dad4cb197865bb9cf0e8da240810fcfabe Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-07src/mb/asus/p5qpl-am/romstage.c: Fix commentAngel Pons
Change-Id: I2b3ad53766bc9cef5ae00392814a03a3e177ad35 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/30705 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07mb/google/poppy/variant/rammus: enable USB acpimarxwang
Main objective for this change is to export the bluetooth reset gpio to the kernel for use in an rf-kill operation. To do so, we enable USB acpi and define all of the USB2 devices, which includes bluetooth's reset gpio information. BUG=b:119899987 TEST=build and flash to rammus, log into rammus and 'cat /sys/firmware/acpi/tables/SSDT > /tmp/ssdt.dml', copy that ssdt.dsml to /tmp/ssdt.dml on host machine, 'iasl -d /tmp/ssdt.dml', then verify that "reset gpio" shows up in the HS03 node's _DSD package in the table. Signed-off-by: marxwang <marx.wang@intel.com> Change-Id: Ieadb3609c7634a20e96c7c4dfb96f5e3f23e468b Reviewed-on: https://review.coreboot.org/c/30607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-07mb/google/sarien: Correct I2C bus clock for touchpadLijian Zhao
Elan touchpad require connected i2c clock to be running at 400Khz, with the modification can get 404Khz speed from Arcada EVT platform. BUG=b:119628524 TEST=Build and boot up on Arcada platform, measure the i2c clock is around 400Khz. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: If717cdd6b73394125df54d90f729ffb4ef37b087 Reviewed-on: https://review.coreboot.org/c/30653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-07mb/google/sarien: Modify ELAN Touchpad i2c bus clkJohn Su
Modify ELAN touchpad bus i2c clk from 466Khz to 400Khz. BUG=b:119628524 BRANCH=master TEST=measure ELAN Touchpad CLK Change-Id: Ia8433c6ef320cea9a0145db4ba440d67ccd0f41e Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30588 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07src: Use "foo **bar" instead of "foo ** bar"Elyes HAOUAS
Change-Id: I8260424ee243c06827f2b5939e1568e52539b282 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-01-06Kconfig: Unify power-after-failure optionsNico Huber
The newest and most useful incarnation was hiding in soc/intel/common/. We move it into the Mainboard menu and extend it with various flags to be selected to control the default and which options are visible. Also add a new `int` config MAINBOARD_POWER_FAILURE_STATE that moves the boolean to int conversion into Kconfig: 0 - S5 1 - S0 2 - previous state This patch focuses on the Kconfig code. The C code could be unified as well, e.g. starting with a common enum and safe wrapper around the get_option() call. TEST=Did what-jenkins-does with and without this commit and compared binaries. Nothing changed for the default configurations. Change-Id: I61259f864c8a8cfc7099cc2699059f972fa056c0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06mb/google/slippy: Add a VBT for all variantsArthur Heymans
The vbt was extracted from the option rom found on stock images. The vbt.bin is the same across all variants. The VBT has a modified BDB block 43, the 'Backlight info block' such that the inverter type for the panel in use is set to 2 (BDB_BACKLIGHT_TYPE_PWM) instead of 0 (BDB_BACKLIGHT_TYPE_NONE). This only seems to matter on Windows, as without it changing the backlight duty cycle does not work. Change-Id: I82c72c561e1058e0b77d80baf330b64f7c6b08e3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30487 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-06superio/*: Link early initialization into bootblockArthur Heymans
This allows to set up the SuperIO in the C_ENVIRONMENT_BOOTBLOCK bootblocks. It is likely unnecessary to do this in verstage. This also renames COMMON_ROMSTAGE to COMMON_PRE_RAM. Change-Id: I3d999611baa1e79c79fe6b1f01822ebaa5f85daf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06mb/google/fizz: enable eist (enhanced speedstep)Matt DeVillier
Without eist enabled, fizz's CPU clocks are locked at the base frequency, and don't scale up or down. This prevents fizz from idling properly and turbo boost from functioning, so enable it (as is done for all other KBL boards) Test: build/boot google/fizz, ensure CPU clocks scale as expected Change-Id: I77dd0e1df1bf88f5bae18e9f832ca8d60fb777b4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-06src/mb/apple/macbookair4_2: move early_southbridge.c to romstage.cAngel Pons
This is done for consistency purposes. Also fix a small formatting issue in a function. Change-Id: I5dc170dbca59b7abbc912f9a26f76886b25ad82f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/30654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06device: Use pcidev_path_behind()Kyösti Mälkki
Change-Id: Iac16f9412d0e6aac908d873c61a4de3935e5318a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26518 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-06device: Use pcidev_path_on_root()Kyösti Mälkki
Change-Id: I2e28b9f4ecaf258bff8a062b5a54cb3d8e2bb9b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06device: Use pcidev_on_root()Kyösti Mälkki
Change-Id: Icf34b39d80f6e46d32a39b68f38fb2752c0bcebc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-04mb/*/chromeos.c: Fix PRE_RAM and unify styleKyösti Mälkki
Change-Id: I99b9c0452ed0e6d580edb5a4f3317d776085b382 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30399 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04mb/google/jecht: Rename save_chromeos_gpios functionKyösti Mälkki
We have init_bootmode_straps() defined for the same purpose. Change-Id: Ia2692d8f8986247ea4ce889d6252d3c4c8b27bc4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30398 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04amdfam10 boards: Use defaults for get_pci1234()Kyösti Mälkki
Note that while these boards had entry 0x0ff0 in comparison to 0x0ffc of the get_default_pci1234() initialisation, the implementation of get_pci1234() unconditionally overrides the first entry. Change-Id: I8bec612f84fe3c3a0c21fc1e10629368857e9c5e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Use defaults for get_pci1234()Kyösti Mälkki
All these boards use the same default initialiser. As this is initialized late after device enumeration, it can't really be used to alter platform configuration. Change-Id: I30fc0298081df0442ec4e9a527340b93a3cd6106 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop array bus_sb700Kyösti Mälkki
Only bus_sb700[0] is evaluated. Change-Id: Ie2cbbdebed3ae03da916d02919cd6a5d36f53562 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop array bus_sb800Kyösti Mälkki
Only bus_sb800[0] is evaluated. Change-Id: I8ae0e6facbbe302b71692cf98a0292ee7d3bdca1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30646 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop array bus_sp5100Kyösti Mälkki
Only bus_sp5100[0] is evaluated. Change-Id: I42a5040ea70a84fb674f2c616c6eba7b23dcdc29 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Use PCI_DEVFN()Kyösti Mälkki
Change-Id: I301ed4024f1dd6fb2009d59b2992830d4f17ee2f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop array bus_sr5650Kyösti Mälkki
Values in the array are not used anywhere. Change-Id: Iee92f903db97533709d54d1f214f2f23a1fab06b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop array bus_rs780Kyösti Mälkki
Values in the array are not used anywhere. Change-Id: I608b8c2e21bc515c56a27982815c1da43f3bb976 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop const variable sbdn_sp5100Kyösti Mälkki
Change-Id: I8756a81324ba3d4374bb6b06f7f0ddade6ba530f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop variable sbdn_sr5650Kyösti Mälkki
It mirrors value of sysconf.sbdn. Change-Id: I3ea42280a1bdceffebb6b5c85aee18347734ee4e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop extern on bus_sr5650 and sbdn_sr5650Kyösti Mälkki
Change-Id: I3b95ec5746077b49cd6dca64d0f884a3d1c362fb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop variable sbdn_rs780Kyösti Mälkki
It mirrors value of sysconf.sbdn. Change-Id: I3cb611f1ea33da19e63523bc0fe99f2792eebc57 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop const variables sbdn_sb800 and sbdn_sb700Kyösti Mälkki
They evaluate to const zero and obscure PCI_DEVFN() use. Change-Id: I8bd8dced62094d5ee8e957241ac29ead054f5c05 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop extern on bus_rs780 and sbdn_rs780Kyösti Mälkki
Change-Id: I7dc943f3376e9b706d3d486231525df85f806858 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Call get_bus_conf() just onceKyösti Mälkki
It has to be called once before PIRQ and MP table generation. Change-Id: I238c6b4810404d320b36d4f6b4a161c1ff11c8d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Add Makefiles and fix resourcemap.cKyösti Mälkki
Also remove global ramstage-y += get_bus_conf.c, this is specific to amdfam10. Change-Id: I49b604ebff6bcfe85518b2c3896ab798c3c7878d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop global bus_isa variableKyösti Mälkki
Value of the global is never evaluated. Change-Id: I74106b0f5f033053288882a5bcd3c1dba3235ac0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Declare get_pci1234() just onceKyösti Mälkki
Change-Id: I68bb9c4301c846fe2270cd7c434f35a79ab25572 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop unused mb_sysconf.hKyösti Mälkki
Change-Id: I819cfcda55995237a8431fdb3291274ab968cd3b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop AMD_SB_CIMXKyösti Mälkki
Copy-paste, boards do not set this. Change-Id: I4c0795a483948b1e357388a5ad639c3f1950bbc8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04device: Replace ugly cases of dev_find_slot()Kyösti Mälkki
These few cases lacked a proper devfn parameter in the form of PCI_DEVFN(dev, fn). Change-Id: Iad0b214df12dee65360d07e887a960b0c73a3e4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-01-04intel/e7505: Drop ECC scrubber codeKyösti Mälkki
This was already disabled and mostly incompatible with romstage having stack in CAR. Change-Id: I1fe02bef668a5bc8ce3d5a1d8090670752b10c3e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-04mb/google/sarien: Add settings for noise mitgationLijian Zhao
Enable acoustic noise mitgation for sarien platform, the slow slew rates are fast time dived by 8. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I5d38a1e03af08f106e2422a319b34c3fb54bdf28 Reviewed-on: https://review.coreboot.org/c/30448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-03mb/google/poppy/variants/nami: Add sku_ids for PantheonFrank Wu
Sync'ing the sku_ids list in the master sku sheet for Pantheon. BUG=b:121207221 BRANCH=firmware-nami-10775.B TEST=emerge-nami coreboot chromeos-bootimage Change-Id: Ic03c3a6fe238f2692ce15c45016115087380c0ca Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-01-03google/kukui: Initialize DRAM from romstageJunzhi Zhao
Add DRAM support for google kukui. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1ed01404343745c883b22a648966327bdcabc5c2 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/28438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-03mb/asrock/h81m-hds: Move GPIO header to a linked C fileTristan Corrick
Using a linked C file is the standard approach for GPIO settings. Change-Id: I6a5ca65bc1553bd382589d67379eafd03dc0b0a3 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-03mb/lenovo/x200: Remove RCBA replayArthur Heymans
This either sets unwanted or unnecessary settings. Tested. Everything still works fine. Change-Id: I0f552dea1b37cdc17c9dd26a0294b59063cdc2be Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-03src/mainboard: Use smm-$(CONFIG_HAVE_SMI_HANDLER)Elyes HAOUAS
Use smm-$(CONFIG_HAVE_SMI_HANDLER) instead of smm-y Change-Id: I0f91bc3e6c8ab31d837ab89af62d700b35c1e01b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-03mb/intel/wtm2: Remove duplicated HAVE_SMI_HANDLERElyes HAOUAS
HAVE_SMI_HANDLER already selected in broadwell/Kconfig file. Change-Id: Ic40b5296eae78cd83c59212042d94424251524b1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-03mb/intel/{kblrvp,kunimitsu,saddlebrook}: Remove duplicated HAVE_SMI_HANDLERElyes HAOUAS
HAVE_SMI_HANDLER already selected in skylake/Kconfig file. Change-Id: I754cf41a4f97d1e692ad4209e4a59987dce2624b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 19:53:36 +0000