summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-03-15google/eve: Update MCU GPIOs configurationVincent Palatin
Keep the BOOT0 pin triggering the MCU bootloader as an input, so the Servo debug board doesn't have to fight with the PCH to program it, the net already has an external pull-down to ensure that the MCU is in normal mode at boot. By default, do not drive the FP sensor reset from the PCH, the MCU is now managing the reset line (but the PCH still has a connection on the current boards). BRANCH=none BUG=b:36025702 TEST=manual testing, program the MCU through a Servo v2 board, and use the FP sensor through the MCU and verify it is not stuck under reset. Change-Id: I19113b5d78013d0ab6ec5a72c6f71dd4c67a88e8 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/18830 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-15google/eve: Apply default AC/DC loadline settingsDuncan Laurie
Set the AC and DC loadline values based on the KBL-Y 2+2 defaults that are applied by FSP. These will be tuned later and are exposed as defaults so the engineers know what to start with. BUG=b:36228330 BRANCH=none TEST=Build and boot on Eve and check debug FSP output to ensure that it is applying the provided loadline values Change-Id: Ieae4f2b201d8210e75bdb9438070a3a2e1fda6b7 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18820 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-03-15intel/skylake: Fix bug in VR configuration with FSP 2.0Duncan Laurie
With the move to FSP 2.0 the number of VR types supported was reduced to 4, and the VR_RING type is no longer present. This means all existing boards using FSP 2.0 are incorrectly passing VR configuration into FSP as the values corresponding to "GT Sliced" and "GT Unsliced" have changed. Fix this by updating the skylake SOC VR handling to account for changes in the FSP configuration and no longer provide VR_RING type when using FSP 2.0. BUG=b:36228330 BRANCH=none TEST=manual: build and boot on Eve Change-Id: I59eea9fba006a4c235d7b42d07fdc6e4f44f7351 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18818 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-03-15google/eve: Use rt5514 instead of 4ch DMICDuncan Laurie
On this platform the DMICs are connected to the rt5514 DSP instead of directly connected to the SOC. Use the new rt5514 NHLT blob instead of the 4ch DMIC blob and add the required I2C and SPI entries in devicetree so this can get probed properly. BUG=b:35585307 BRANCH=none TEST=build and boot on Eve P1 and check for rt5514 driver enumerated by the kernel Change-Id: I0f2cb532771ee1857df7f33c52a96acf96dc1f54 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18817 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-15siemens/mc_apl1: Clean up the codeMario Scheithauer
This patch make some general adaptations in relation to commit 6a489237 (mainboard/intel/leafhill: Clean up). - add necessary defaults to Kconfig - remove irrelevant entries from FMD file - include romstage file for better understanding Change-Id: I190d648a7ffeca11acc6560db85ff03c78e85b21 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/18808 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-15mainboard/google/reef: Add FPF_STATUS FMAP regionAndrey Petrov
Add FPF_STATUS region under MISC_RW. The purpose of the region is to store FPF status. Change-Id: I2997b3d39a94bf444df51068f254edcf49c47afd Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18773 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-15Revert "mainboard/intel/galileo: Add vboot support"Lee Leahy
This reverts commit a50ced2eba20a007fa5b486c251c252ad09868cf. Change-Id: I4f7d3177015bfe280111843014c310e0d333cb17 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18814 Tested-by: build bot (Jenkins)
2017-03-14mainboard/intel/galileo: Add vboot supportLee Leahy
Add the necessary files and changes to support vboot. TEST=Build and run on Galileo Gen2 with a SparkFun CryptoShield 1. Obtain and install a SparkFun CryptoShield. https://www.sparkfun.com/products/13183 2. Edit src/mainboard/intel/galileo/Kconfig to select VBOOT_WITH_CRYPTO_SHIELD 3. Use make menuconfig to update the config values and select a payload that will fit. I used SeaBIOS which does not boot. 4. Build coreboot 5. Use the command file below to generate the signed coreboot image. 6. Flash build/coreboot.rom onto the Galileo board 7. The test is successful if verstage detects that it needs recovery after Phase 1. This is expected because the image does not contain the GBB section. 8. Flash build/coreboot.signed.bin onto the Galileo board 9. The test is successful if verstage reaches Phase 4 and selects SLOT A to load the rest of the files. #!/bin/sh # # The necessary tools were built and installed using the following commands: # # pushd 3rdparty/vboot # make # sudo make install # popd # # The keys were made using the following command # # 3rdparty/vboot/scripts/keygeneration/create_new_keys.sh \ # --4k --4k-root --output $PWD/keys # # # Create the GBB area blob # gbb_utility -c 0x100,0x1000,0x7ce80,0x1000 gbb.blob # # Add the empty GBB to the coreboot.rom image # dd conv=fdatasync ibs=4096 obs=4096 count=1553 \ if=build/coreboot.rom of=build/coreboot.signed.rom dd conv=fdatasync obs=4096 obs=4096 seek=1553 if=gbb.blob \ of=build/coreboot.signed.rom dd conv=fdatasync ibs=4096 obs=4096 skip=1680 seek=1680 \ count=368 if=build/coreboot.rom of=build/coreboot.signed.rom # # Add the keys and HWID to the GBB # gbb_utility \ --set --hwid='Galileo' \ -r $PWD/keys/recovery_key.vbpubk \ -k $PWD/keys/root_key.vbpubk \ build/coreboot.signed.rom # # Sign the firmware with the keys # 3rdparty/vboot/scripts/image_signing/sign_firmware.sh \ build/coreboot.signed.rom \ $PWD/keys \ build/coreboot.signed.rom Change-Id: I96170412e7bbc2b9c747ff5e2c845f29220353ed Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18041 Tested-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-14google/sand: Remove support for tablet mode switchKatherine Hsieh
Sand is not convertible and no EC sensor sends event from EC to AP. That event default is tablet mode, we don't have to enable tablet event. Modify the ec.h, is based on <baseboard/ec.h> BUG=b:36108742 BRANCH=reef TEST=emerge-sand coreboot, boot to OS and touchpad and keyboard can work. Change-Id: I6b6b45b5b4daf2c430ed18130f39eab0bd9a9812 Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/18737 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-12google/poppy: Enable internal pull-up on PWRBTN#Shobhit Srivastava
Enable an internal pull-up on the power button input as short press is resulting in power button override being asserted. BUG=b:36111214 BRANCH=none TEST=tested on poppy board to ensure quick power button press does not result in a shutdown due to power button override. Change-Id: I3a25b78562e2302b6f7575e64c87ae8142690701 Signed-off-by: Shobhit Srivastava <shobhit.srivastava@intel.com> Reviewed-on: https://review.coreboot.org/18734 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-11lenovo/t400/dock.c: Fix issues found by checkpatch.plPaul Menzel
Change-Id: If7ebab8af1ae0c048cb89c2feb5f6a65848b6952 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/18767 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-11lenovo/t400: Rewrite dock from t60Kyösti Mälkki
Old dock.c copied from x201 was incorrect. Do a rewrite of t60 dock code as pnp devices. Fixes USB and serial on the dock, if it is already connected when computer is powered on. DVI and ethernet worked without this patch. Hot-plug is yet to be fixed. Change-Id: Ib20a0eff10d0cde92dd089baf4fca28b117dc999 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18054 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-03-10google/sand: Add devicetree.cb file for sandKatherine Hsieh
It is a copy from baseboard/devicetree.cb (coreboot.org ToT) BUG=b:35775065 BRANCH=reef TEST=emerge-sand coreboot Change-Id: I5ba86e54ccfbf5af7bf0e9ad8fe7bf22020e48ee Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/18703 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-10mainboard/google/reef: Modify TCPU, TSR2 and TRT tableTim Chen
Update the DPTF parameters based on thermal test result. (ZHT_DPTF_EVT2_v0.5_20170306.xlsx) 1. Update DPTF TCPU critical trigger point. TCPU critical point: 105 2. Update DPTF TSR2 passive trigger point. TSR2 passive point: 58 3. Change thermal relationship table (TRT) setting. Change CPU Throttle Effect on CPU sample rate to 10secs. Change Charger Effect on Temp Sensor 2 sample rate to 30secs. Change CPU Effect on Temp Sensor 2 sample rate to 60secs. BUG=b:35583586 BRANCH=master TEST=build and boot on electro dut Change-Id: I85564ccdaf327eeaa13bf1f31d9a933609a21582 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/18610 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-10mainboard/google/reef: Configure SDCARD card detect pinVenkateswarlu Vinjamuri
This configures GPIO_177 as an input pin for SDCARD card detect. This also changes the ownership of the pin from ACPI to GPIO driver. Assign the sdcard card detect pin in devicetree for reef variants. CQ-DEPEND=448173 BUG=chrome-os-partner:63070 TEST=None Change-Id: Ia8aef60bd7d0ea36afb39f76fab051aa46a2ed64 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/18497 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-10asus/m2v: Make _CRS methods serializedPaul Menzel
Address the iasl 20160108-64 (Ubuntu 16.04) warnings below. ``` Intel ACPI Component Architecture ASL+ Optimizing Compiler version 20160108-64 Copyright (c) 2000 - 2016 Intel Corporation dsdt.aml 245: Method (_CRS, 0, NotSerialized) Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) dsdt.aml 262: Method (_CRS, 0, NotSerialized) Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) dsdt.aml 277: Method (_CRS, 0, NotSerialized) Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) dsdt.aml 295: Method(_CRS, 0) { Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) ``` Change-Id: Id5b0f33fba8ea25e4a6aa4f01c69a69aaf5aef23 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/18323 Tested-by: build bot (Jenkins) Reviewed-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-09drivers/spi/tpm: provide Kconfig to indicate CR50 usageAaron Durbin
Going forward it's important to note when a CR50 is expected to be present in the system. Additionally, this Kconfig addition provides symmetry with the equivalent i2c Kconfig option. BUG=b:35775104 Change-Id: Ifbd42b8a22f407534b23459713558c77cde6935d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18680 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-03-09mainboard/google/reef: increase pre cbmem console size for Chrome OSAaron Durbin
verstage can be pretty chatty so bump the pre cbmem console size when building for Chrome OS so that all messages can be observed. BUG=b:35775104 BRANCH=reef TEST=Booted and noted no cutoff of console when sec data being saved. Change-Id: I0ce2976572dedf976f051c74a3014d282c3c5f4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18679 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-09google/poppy: Configure SRCCLKREQ4 as No ConnectNaresh G Solanki
SRCCLKREQ4 is unused, so configure SRCCLKREQ4 as NC (No Connect). Change-Id: I6e265b9c9faa0df20208bb82278cadbbbbe6c537 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/18589 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-09google/pyro: Update DPTF settingsKevin Chiu
1. Update DPTF TSR1 passive trigger points. TSR1 passive point: 50 2. Update DPTF PL1 Minimum PL1 min: 2.5W BUG=b:35586881 BRANCH=reef TEST=emerge-pyro coreboot Change-Id: Ia2634f40098d026c4d228fab4b7c05501c1ff05f Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/18699 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-09AGESA f15: Disable IDS tracing by defaultKyösti Mälkki
We build with WARNINGS_ARE_ERRORS, while IDS tracing will raise various (non-fatal) printk() format warnings. Change-Id: I9dc81c89ee60d17a6556a412380fed1413af66bd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18560 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-03-09mainboard/google/poppy: Enable cros_ec_keyb deviceFurquan Shaikh
This is required to transmit button information from EC to kernel. BUG=b:35774934 BRANCH=None TEST=Verified using evtest that kernel is able to get button press/release information from EC. Change-Id: I8f380f935c2945de9d8e72eafc877562987d02db Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18642 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-08mainboard/google/poppy: Add EC_HOST_EVENT_MODE_CHANGE to wakeup sourceFurquan Shaikh
Allow EC mode change event to wake AP up in S3. BUG=b:35775085 BRANCH=None TEST=Compiles successfully for poppy. Change-Id: I6f1546c60aef6620e22cdce2fab3a2709e6556a1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18608 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-08google/eve: Configure GPIOs for new boardDuncan Laurie
A new board revision is making use of two previously unused GPIOs to drive BOOT/RESET pins to an on-board MCU. The reset pin is open drain so it is set as input by default, and the boot pin is driven low by default. Since these are UART0 pins they also need to be set up again after executing FSP-S as it will change them back to native mode pins. BUG=b:36025702 BRANCH=none TEST=manual testing on reworked board, toggling GPIOs to put the MCU into programming mode. Change-Id: Id6f0ef2f863bc1e873b58e344446038786b59d25 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18661 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-08mainboard/google/snappy: Override USB2 phy settingWisley Chen
Fine tune USB2, need to override the following registers. port#1: PERPORTPETXISET=7 PERPORTTXISET=0 BUG=b:35858164 BRANCH=reef TEST=built, measured eye diagram on snappy, and reviewed by intel Change-Id: I461cf8f032b4e70abc9707e6cd3603a62cee448f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/18590 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-08binaryPI boards: Drop any ACPI S3 supportKyösti Mälkki
None of the boards currently have HAVE_ACPI_RESUME and and ACPI S3 support calls should not appear under board directories anyways. Change-Id: I1abd40ddba64be25b823abf801988863950c1eb5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18500 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-03-08AMD geode: Avoid conflicting main() declarationKyösti Mälkki
Declaration of main in cpu/amd/car.h conflicts with the definition of main required for x86/postcar.c in main_decl.h. Change-Id: I19507b89a1e2ecf88ca574c560d4a9e9a3756f37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18615 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-08mainboard/asus: Move F2A85-M_LE variant to F2A85-M.Kyösti Mälkki
Note that M and M_PRO had same DefaultPlatformMemoryConfiguration defined, use one for both. Change-Id: Ia1925957800a7fe6ef511b2d041f7a863c8fc931 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18606 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-07mainboard/intel/galileo: Remove space before opening bracketLee Leahy
Fix the error detected by checkpatch and update the copyright date. TEST=Build and run on Galileo Gen2 Change-Id: Idc55169913e7b7b0aca684c26f6ed3b349fc6c09 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18592 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-07google/gru: add MAX_SDRAM_FREQ config to choose max ddr freqShunqian Zheng
Gru/Kevin use 933 MHz (actually 928 MHz for better jitter) as max sdram frequency, while bob uses 800 MHz. It's normal some variants can't meet 928 MHz SI requirement and hence have to use a lower freq as spec. BUG=chrome-os-partner:61001 BRANCH=gru TEST=check dpll is 800 MHz on bob Change-Id: I6d19a351f25d1f48547715ce57c3a87d9505f6f1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8176bfea52422c713f144ffec419752aeca66db2 Original-Change-Id: I46afba8d091f1489feeb20cafc44decaa81601fc Original-Signed-off-by: Caesar Wang <wxt@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/420208 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Shasha Zhao <Sarah_Zhao@asus.com> Original-Tested-by: Shasha Zhao <Sarah_Zhao@asus.com> Original-(cherry picked from commit eba5dff79eeedae5ff608d2d8d297ccf9c13cb55) Original-Reviewed-on: https://chromium-review.googlesource.com/448277 Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/18581 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-07google/veyron: add K4B4G1646E-BYK0 ddr with ramid 000ZShunqian Zheng
The K4B4G1646E-BYK0 shares sdram config with K4B4G1646D-BYK0. For clarity, sdram-ddr3-samsung-2GB now is used by - K4B4G1646D-BYK0 - K4B4G1646E-BYK0 - K4B4G1646Q-HYK0 BUG=chrome-os-partner:62131 BRANCH=veyron TEST=emerge Change-Id: Ie43f23bf8f5f5b1acbb74c85cac17fe181c841c4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 46d62d87101e0ee1050b00db02b3ecaa4587e9f4 Original-Change-Id: I461c6f36c28ea0eeaf7d64292c9c87ab0c9de443 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/446197 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-(cherry picked from commit f98251a4a4fe4d49721a936a684f6ac80f3f6405) Original-Reviewed-on: https://chromium-review.googlesource.com/446300 Reviewed-on: https://review.coreboot.org/18519 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-07google/veyron_*: Add new Micron and Hynix modulesDavid Hendricks
This adds SDRAM entries for the following modules: - Micron: DDMT52L256M64D2PP-107 - Hynix: H9CCNNNBKTALBR-NUD They are compatible with Samsung K4E8E324EB-EGCF, so this just copies sdram-lpddr3-samsung-2GB-24EB.inc and changes the name used in the comment near the top. Notes on our "special snowflake" boards: - veyron_danger's RAM ID is hard-coded to zero, so I skipped changes involving the binary first numbering scheme. - Rialto's SDRAM mapping is different, so I padded its SDRAM entries to 24 to match other boards. - veyron_mickey requires different MR3 and ODT settings than other boards due to its unique PCB (chrome-os-partner:43626). BUG=chrome-os-partner:59997 BRANCH=none TEST=Booted new modules on Mickey (see BUG) Change-Id: If2e22c83f4a08743f12bbc49b3fabcbf1d7d07dd Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 35cac483e86e57899dbb0898dad3510f4c2ab2d3 Original-Change-Id: I22386a25b965a4b96194d053b97e3269dbdea8c7 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/412328 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Queue: Jiazi Yang <Tomato_Yang@asus.com> Original-Tested-by: Jiazi Yang <Tomato_Yang@asus.com> Original-(cherry picked from commit bd5aa1a5488b99f2edc3e79951064a1f824062f6) Original-Reviewed-on: https://chromium-review.googlesource.com/446299 Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18518 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-07google/poppy: fix finger print sensor interrupt gpio configurationRizwan Qureshi
Configure the right GPIOs for finger print sensor interrupt and reset lines. As per the schematics GPP_C8 is for sensor interrupt and GPP_C9 is for sensor reset. Change-Id: Ib25c68ec2fe20b1302b6170d67ceab7e8cca1a83 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18389 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-07mainboard/asus: Add F2A85-M PRO variant to F2A85-M.Denis 'GNUtoo' Carikli
Status: - The primary PCIe 16x slot works: It was tested with a GPU compatible with nouveau - USB and audio are not very reliable - The ethernet card is not seen with lspci - The secondary pcie16x slot isn't working: When plugging a GPU inside, it's not seen with lspci - SATA works: The board fully boots GNU/Linux - Serial doesn't work - Populating the RAM slots might have to follow the recommended memory configuration that is described in the mainboard manual in order to be able to boot. Note that when running the shutdown command, the default boot firmware will rewrite part of the boot flash before powering off the machine. Flashing coreboot internally from the default boot fimrware can still work, if the power plug is removed after running flashrom. Change-Id: I934de521d0acceb7770f23b2ae15c31a67ae73eb Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/16931 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-07AGESA: Add agesa_helper.h headerKyösti Mälkki
These definitions do not require AGESA.h include, and we will eventually remove agesawrapper.h files. Change-Id: I1b5b78409828aaf2616e177bb54a054960c3869f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18588 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-07AGESA: Remove leftover s3resume includeKyösti Mälkki
Change-Id: I7a1574259f73a52b66d03c686ae8ab70345c36ed Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18586 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-07AGESA fam14: Sanitize headerfileKyösti Mälkki
This file is only static defines. Change-Id: Id50a0eba1ce240df36da9bd6b2f39a263fa613df Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18585 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-03-07AGESA: Remove leftover agesawrapper includeKyösti Mälkki
Change-Id: Ib37989ee7535e59b1903537995f8383d8b04387c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18584 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-03mb/getac/p470: Do not select EARLY_CBMEM_INITArthur Heymans
This is selected by default and not overwritten anywhere else for this board. Change-Id: I0f803e130366ee322163f7bb6fa16cac75f5416e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18541 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2017-03-02mainboard/google/poppy: Disable deep S3 on poppyFurquan Shaikh
BUG=chrome-os-partner:62963 BRANCH=None TEST=Compiles successfully Change-Id: Icb929262fd67362b8e5c5cf31dce04ab1f496695 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18467 Tested-by: build bot (Jenkins) Reviewed-by: Rajat Jain <rajatja@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-01mb/apple/macbook21: Remove PCI reset code from romstageMono
Follow commit 7676730 (mb/lenovo/x60: Remove PCI reset code from romstage). The PCI reset was copied from code specific for Roda RK886EX and Kontron 986LCD-M. It is not needed on the MacBook. Change-Id: I22dac962e8079732591f9bc134c1433f5c29ff4e Signed-off-by: Axel Holewa <mono-for-coreboot@donderklumpen.de> Reviewed-on: https://review.coreboot.org/18502 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-28mainboard/lenovo: Power off USB and mute audio before entering S3Nicola Corna
Currently, the USB ports are still powered during S3, so turning them off may reduce the power consumption. Note that, when the USB Always on feature is enabled, the USB ports are always powered, regardless of the USBP state. This patch also disables the audio, as it might consume some power or generate some noise. Both the USB power and the audio are reenabled by coreboot during the poweron. Change-Id: If0431b1315fffef2e372e7023f830a66bb7fddae Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18464 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-02-28Select a default SeaBIOS PS2 timeout in H8 KconfigArthur Heymans
This timeout is probably needed on all devices with Lenovo H8 embedded controllers so set the default there. Change-Id: I830ab1894f7c0f10f55c82e398becf44d810852d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18274 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-02-25mainboard/google/reef: keep LPSS_UART2_TXD high in suspend stateAaron Durbin
The cr50 part on reef is connected to the SoC's UART lines. However, when the tx signal is low it causes an interrupt to fire on cr50. Therefore, keep the tx signal high in suspend state so that it doesn't cause an interrupt storm on cr50 which prevents cr50 from sleeping. BUG=chrome-os-partner:63283 BRANCH=reef TEST=s0ix no longer causes interrupt storm on cr50. Power consumption normal. Change-Id: Idaeb8e4427c1cec651122de76a43daa15dc54d0f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18491 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-25google/eve: Add rise/fall times for I2C busesDuncan Laurie
Apply tuning for the PCH I2C buses on Eve based on rise/fall time measurements that were done with a scope. BUG=chrome-os-partner:59686 BRANCH=none TEST=Manual testing on Eve P1 to verify that all devices on I2C buses are still functional. Post-tuning measurement will be done once a new firmware is released. Change-Id: I3d70ff455a20ecda374d7e7fa6cd3ab15e7f2621 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18487 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-25mainboard/intel/leafhill: Clean upAndrey Petrov
This patch tries to clean the code by: o removing duplication of LPC GPIO pads o removing incorrect definitions from devicetree o removing irrelevant entries from FMD file Also adds vital defaults in Kconfig so it is possible to build an image. Change-Id: Id9913f3b053189166392271152ce5300d82a7de8 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18479 Tested-by: build bot (Jenkins)
2017-02-24mainboard/google/poppy: Change touchscreen IRQ to level-triggeredFurquan Shaikh
BUG=chrome-os-partner:62967 BRANCH=None TEST=Verified that touchscreen works on power-on and after suspend-resume as well. Change-Id: Id674cbcc2d524a6ed2883bf9f0e9e076890f9a85 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18466 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-23mb/emulation/*-riscv: Don't select ARCH_BOOTBLOCK_RISCVJonathan Neuschäfer
It's already selected by SOC_UCB_RISCV. Change-Id: Ic8a14300cdea2a4ab763b2746434891b72843604 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/18390 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-23google/gru: whitespace fixPatrick Georgi
Follow up to https://review.coreboot.org/#/c/18460/ Change-Id: Ic3aada2acf3051622698e10d2e764050e16480d5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18475 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-23google/gru: Tuning USB 2.0 PHY0 and PHY1 squelch detection thresholdWilliam wu
According to USB 2.0 Spec Table 7-7, the High-speed squelch detection threshold Min 100mV and Max 150mV, and we set USB 2.0 PHY0 and PHY1 squelch detection threshold to 150mV by default, so if the amplitude of differential voltage envelope is < 150 mV, the USB 2.0 PHYs envelope detector will indicate it as squelch. On Kevin board, if we connect usb device with Samsung U2 cable, we can see that the impedance of U2 cable is too big according to the eye-diagram test report, and this cause serious signal attenuation at the end of receiver, the amplitude of differential voltage falls below 150mV. This patch aims to reduce the PHY0 and PHY1 otg-ports squelch detection threshold to 125mV (host-ports still use 150mV by default), this is helpful to increase USB 2.0 PHY compatibility. BRANCH=gru BUG=chrome-os-partner:62320 TEST=Plug Samsung U2 cable + SEC P3 HDD 500GB/Galaxy S3 into Type-C port, check if the USB device can be detected. Change-Id: Ia0a2d354781c2ac757938409490f7c4eecdffe61 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7d74311c25762668386061234df0562f84b7203e Original-Change-Id: Ib20772f8fc2484d34c69f5938818aaa81ded7ed8 Original-Signed-off-by: William wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/431015 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Inno Park <ih.yoo.park@samsung.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18462 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2017-02-23google/gru: update the pwm regulatorCaesar Wang
As David commented the "Bob and other follow-ons match Gru, Kevin should be the special case here", and update the calculations value for gru/bob board. From the actual tests, some regulator voltage than the actual set of less than 20mv on bob board. (e.g: little-cpus and Center-logic) Update the {min, max} regulator voltage for Bob board. Make sure we get the accurate voltage. BUG=chrome-os-partner:61497 BRANCH=none TEST=boot up Bob, measure the voltage for little cpu and C-logic. Change-Id: Iad881b41d67708776bfb681487cf8cec8518064e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 25e133815f49018e7496c75077b8559c207350a4 Original-Change-Id: I3098c742c7ec355c88f45bd1d93f878a7976a6b4 Original-Signed-off-by: Caesar Wang <wxt@rock-chips.com> Original-Signed-off-by: Shasha Zhao <Sarah_Zhao@asus.com> Original-Reviewed-on: https://chromium-review.googlesource.com/424523 Original-Reviewed-by: David Schneider <dnschneid@chromium.org> Original-Reviewed-by: Brian Norris <briannorris@chromium.org> Original-Signed-off-by: Shasha Zhao <Sarah_Zhao@asus.com> Original-Reviewed-on: https://chromium-review.googlesource.com/430403 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18460 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-23mb/google/poppy: Enable support for DPTFSumeet Pawnikar
This patch adds the DPTF settings specfic to the mainboard and enables the CPU and other thermal sensors as participant device for poppy. It enables the DPTF flag in the device tree for poppy. It also includes the DPTF specific ASL file in the main DSDT definition. BUG=None BRANCH=None TEST=Built for poppy. Change-Id: If44b01dd3c17fea06681ccf50e8e9f406e642e36 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17926 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-23intel/minnow3: follow up with recent changes in masterPatrick Georgi
minnow3 doesn't build right now due to API divergence on master branch. Follow up with recent changes. Change-Id: Iee84750292f22aa040127bcbfe523a0b9eaa8176 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18476 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2017-02-23google/oak: Add initial support for RowanYidi Lin
Update GPIO controls and mainboard configurations for Rowan. [pg: use the opportunity to clean-up the gerrit-rebase task list with the entirely unrelated Ignore-CL-Reviewed-on lines] BUG=chrome-os-partner:62672 BRANCH=none TEST=emerge-rowan coreboot Change-Id: I110fb368b3d9fa9dfb2bf091342dfb511ff7c09c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f4252cbe94a7456108aaa522e170bca5dcb1fdd1 Original-Change-Id: I18ebc3ccf4c7d051839d7c50e9b0682ef8f09830 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/430557 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/341513 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/327003 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/355221 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/354670 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/361360 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/361361 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/361362 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/361363 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/382320 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/405110 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/405130 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/419795 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/424139 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/430293 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/430294 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/430295 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/427820 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/427821 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/427822 Reviewed-on: https://review.coreboot.org/18463 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-23google/gru: improve eye diagram for passing the testCaesar Wang
The children of Gru should share the benefits. In the real world, Bob can't pass the eye diagram tests. BUG=chrome-os-partner:62714 BRANCH=firmware-gru-8785.B TEST=build coreboot Change-Id: I2470bbc81acdaf2458d660dca5dc307cc3038f83 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d0cb3e718a7571f602a00c08a42019851634e7fd Original-Change-Id: I0ccb48bb52eb770ccc9c8c265b07df46b0308dd3 Original-Signed-off-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/440745 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/441468 Reviewed-on: https://review.coreboot.org/18461 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-23mb/apple/macbook21: Remove unused cmos parametersArthur Heymans
These parameters are probably the result of copying from the Thinkpad X60 code. Change-Id: I29763b38618d4b306c37424c5c4b57dfcf69424b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18290 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-22intel/minnow3: Implement and configure GPIO tablesBrenton Dong
Copy GPIO table implementation from the google/reef board except with board variant features removed. Also exlcude CrOS GPIO functions. Remove previous romstage GPIO implementation in brd_gpio.h and romstage.c. Configure GPIO settings for MinnowBoard 3. Change-Id: Id2817dcf2f8f196ecd13c810f7f0010a115db566 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/18375 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-22intel/minnow3: Configure memory properlyBrenton Dong
Set the proper memory configuration for the MinnowBoard 3. The current values are copied from intel/leafhill. Set the proper values for MinnowBoard 3. Change-Id: Ie37842f5ce2cabaa892f42ee945c91fe3ace527a Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/18374 Tested-by: build bot (Jenkins) Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-02-22mainboard/intel: Add MinnowBoard 3Brenton Dong
This commit adds the initial scaffolding for the MinnowBoard 3 with Apollo Lake silicon. This mainboard is based on Intel's Leafhill CRB with Apollo Lake silicon. In a first step, it concerns only a copy of intel/leafhill directory with name changes. Special adaptations for MinnowBoard 3 mainboard will follow in separate commits. Change-Id: I7563fe37c89511c7035c5bffc9b034b379cfcaf4 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/18298 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-22purism/librem13: Set system type to laptopYouness Alaoui
Change-Id: I3ae80f5727e83a1c9210f0d13fa7fc32c5c79085 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/18412 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins)
2017-02-22purism/librem13: Fix HDA codec verbs. Use correct codec vendor idYouness Alaoui
There was a 'typo' where the subsystem id was set instead of the codec vendor id. This caused the lynxpoint HDA codecs init to fail to find the proper codecid verbs so codecs were never initialized. That caused the headphones jack to not work. Change-Id: I975031643fc42937ecaea2300639b90632543f67 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/18411 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins)
2017-02-22purism/librem13: Enable PCIe ports 1 and 2Youness Alaoui
Change-Id: I1fa72e59866ee4aad34d4b60e499f6e37acc367f Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/18410 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-22purism/librem13: Fix M.2 issues.Youness Alaoui
The M.2 SSD is on the SATA port 3, which also required the DTLE setting to be set. This fixes issues with the M.2 SSD not being detected/stable. Change-Id: Id39d9ec395a2d9d32be4c079678d0708f08b3935 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/18409 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-22src/mainboard/digitallogic: Add license headers to all filesMartin Roth
Change-Id: I6a1810360b5c3210038670aea6e80312798a63cd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18406 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-02-22acpi: Add ACPI_ prefix to IRQ enum and struct namesFurquan Shaikh
This is done to avoid any conflicts with same IRQ enums defined by other drivers. BUG=None BRANCH=None TEST=Compiles successfully Change-Id: I539831d853286ca45f6c36c3812a6fa9602df24c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18444 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-22google/gru: Fix whitespacePatrick Georgi
Change-Id: I538c28fb1bc412947ef9df947fa3f6a3312aeb4b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18322 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-21mainboard/google/poppy: Enable Realtek 5663 supportRizwan Qureshi
Enable Realtek RT5663 codec i2c device and add required SSDT parameters. BUG=chrome-os-partner:62051 BRANCH=None TEST=With required driver support in kernel verify audio on headset Change-Id: I9b9eb1e7edca56870f5be0e4fd603c9b0dc7f9de Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18216 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-21mainboard/google/poppy: Enable Maxim MAX98927 codecRizwan Qureshi
Enable Maxim 98927 codec i2c device and add required SSDT parameters. BUG=chrome-os-partner:62051 BRANCH=None TEST=with required driver support in kernel verify audio on poppy on-board speakers. Change-Id: Id731de42d77204d59f32ac4c33a245837d6e2107 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Dylan Reid <dgreid@chromium.org> Reviewed-on: https://review.coreboot.org/18215 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-21mainboard/google/poppy: Generate required nhlt tableRizwan Qureshi
poppy board uses Maxim 98927 speaker codec and Realtek RT5663 for headset. Select the apropriate NHLT blobs to be packaged in CBFS. Also, generate the required ACPI NHLT table for codec and the supported topology in poppy. BUG=chrome-os-partner:62051 BRANCH=None TEST=With the required driver support in kernel verify that the Audio plays on on-board speakers and headset, recording works from on-board mics and headset mics. Change-Id: I98c65038b35fe99a661807de0766e6eac2c80eed Signed-off-by: M Naveen <naveen.m@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/18214 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-20drivers/i2c: Use I2C HID driver for wacom devicesFurquan Shaikh
Wacom I2C driver does the same thing as I2C HID driver, other than defining macros for Wacom HID. Instead of maintaining two separate drivers providing the same functionality, update all wacom devices to use generic I2C HID driver. BUG=None BRANCH=None TEST=Verified that ACPI nodes for wacom devices are unchanged. Change-Id: Ibb3226d1f3934f5c3c5d98b939756775d11b792c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18401 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-20google/eve: Set touchscreen I2C bus speed to 1MHzDuncan Laurie
Enable Fast-Plus speed for the touchscreen device so it can be used at 1MHz instead of 400KHz. BUG=chrome-os-partner:61277 TEST=manual testing on Eve P1, needs backported kernel patches to actually make use of any I2C speed other than 400KHz Change-Id: I3f44ff4a02a02a7b05e69ad54d4c6d60e5878393 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18397 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-20google/eve: Add audio devicesDuncan Laurie
Add the audio devices to Eve mainboard: - Describe Maxim 98927 speaker amps and RT5663 headphone codec in ACPI so they can be enumerated by the OS. - Supply NHLT binaries for MAX98927, RT5663, and DMIC_4CH. BUG=chrome-os-partner:61009 TEST=manual testing on Eve P1 with updated kernel to ensure that both speakers and headset are functional. DMIC support is is still being worked on and is not yet functional. Change-Id: I5243e35d159a0ed15c6004e94ba5a50b28cff0a9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18398 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-02-20lenovo/s230u: Add Thinkpad Twist (S230U)Tobias Diedrich
Created using autoport plus some manual work and copying from G505S to account for the non-H8 EC. This model uses the same ENE KB9012 EC as the G505S. Tested: - Mainboard variant with 8GB Elpida DDR3 - SeaBIOS payload - Booting into Linux 4.9.6 with Debian/unstable installed on the internal HDD/SDD slot - Native raminit - Both native VGA init and option rom VGA init - Basic TPM functionality (auto-detection and RNG) - Battery status readout - Basic ACPI functions (power button event; power-off; reboot) - thinkpad-acpi hotkey functions - thinkpad-acpi LED control (red thinkpad LED) - Suspend to RAM and resume works - Mini displayport output works Known issues: - Patches needed for EC battery support https://review.coreboot.org/#/c/18348/ https://review.coreboot.org/#/c/18349/ - No thermal zone since temperature sensing is not H8-compatible and needs to be reverse engineered. Not tested: - msata/wwan (probably works) Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Change-Id: I52bc4515277e5c18afbb14a80a9ac788049f485c Reviewed-on: https://review.coreboot.org/18351 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-02-20mainboard/{google,intel}: Change config option selectionFurquan Shaikh
Change config option selection from "config xyz default y" to "select xyz" if the config option has no dependencies. BUG=None BRANCH=None TEST=Verified that config option selection remains unchanged. Change-Id: I259ae40623b7f4d5589e2caa0988419ba4fefda4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18400 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-20mainboard/google/reef: Remove config DRIVERS_GENERIC_GPIO_REGULATORFurquan Shaikh
Since we are not using gpio regulators on reef anymore, remove the selection from Kconfig as well. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Iae7d88dec3ac476d65b292f97a6ba3add71ce07a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18399 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-20siemens/mc_apl1: Set MAC address for all available i210 MACsMario Scheithauer
This mainboard uses two i210 Ethernet controller. Therfore we enable the usage of the i210 driver and have to provide a function to search for a valid MAC address for all i210 devices by using Siemens hwilib. Change-Id: I36246cdef987fcece15a297ebb2f41561fca1f69 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/18380 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-02-20google/slippy: consolidate variants' common mainboard.asl codeMatt DeVillier
Move code common code from each variant's mainboard.asl into common ACPI code for all variants (like google/auron). This also adds the _PRW method for the LID0 device for falco and peppy, which omitted the function when they were originally upstreamed. See Chromium commit c8b41f7, falco: Add _PRW for LID0 ACPI Device Change-Id: I7f5129340249a986f5996af37c01ccbde8d374e8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18368 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-20google/eve: Set rise/fall timing values for I2C bus 1Duncan Laurie
Apply the measured rise and fall times for I2C bus 1 on Eve so it can be tuned properly for 400KHz operation. BUG=chrome-os-partner:63020 TEST=verify I2C1 bus speed with a scope Change-Id: I32b5aa460ea35aadca7f3d52324a64880764919f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18396 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-20google/eve: Fix FPC supportDuncan Laurie
Currently UART0 GPIOs are being put into native mode during FSP-S stage, so have ramstage re-configure them back to regular GPIO mode. GPP_C8 does not seem to be functioning properly when routed to the APIC, possibly due to the UART0 being enabled even though it is unused, which is required because UART0 is PCI 1e.0 and so must be present for other 1e.x functions to be enumerated. Instead, use this pin as a GPIO interrupt so it will be routed through the GPIO controller at IRQ 14. GPP_C9 was inverted and was only working because the pin was being re-configured in FSP-S. Also export the reset gpio as a device property so it can be used by the kernel driver, which will stop it from complaining at boot. BUG=chrome-os-partner:61233 TEST=verify that the interrupt and device is functional in the OS Change-Id: Iaf9efbf50a13a981c6a9bbd507475777837e9c12 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18395 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-19mb/lenovo/t400: Implement hybrid graphic in romstageArthur Heymans
The hybrid driver select by DRIVERS_LENOVO_HYBRID_GRAPHICS doesn't work for t400/t500. Replace it with a custom romstage implementation. Tested on Lenovo T500 with dual graphics: * Intel Native GFX init * AMD VBios * GNU Linux 4.8.13 * SeaBios as payload * Discrete is working (44 W) * Integrated is working (24 W) * Switchable is working (34 W) ** Both GPUs are enabled, with Intel being connected to the panel ** DRI_PRIME allows to use AMD GPU ** ACPI doesn't seem to work (no vgaswitcheroo) Depends on Change-Id: I4dc00005270240c048272b2e4f52ae46ba1c9422 Depends on Change-Id: If389016f3bb0c4c2fd0b826914997a87a9137201 Change-Id: I7496876e9b434d4a2388e1ede27ac604670339b7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18010 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-02-18apple/macbook21: Remove unused include `smbios.h`Paul Menzel
Change-Id: I4ed7a164323a71d95a37ea754ec923ca0c5e6219 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/18388 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
2017-02-17nb/intel/x4x: Implement resume from S3 suspendArthur Heymans
It rewrites the results of receive enable stored in the upper nvram region, to avoid running receive enable again. Some debug info is also printed about the self-refresh registers. (Not enforcing a reset here, since 0 does not necessarily mean it's not in self-refresh). Change-Id: Ib54bc5c7b0fed6d975ffc31f037b5179d9e5600b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17998 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-17nb/intel/x4x: Fix raminit on reset pathArthur Heymans
Previously the raminit failed on hot reset and to work around this issue it unconditionally did a cold reset. This has the following issues: * it's slow; * when the OS issues a hot reset some disk drives expect their 5V power supply to remain on, which gets cut off by a cold reset, causing data corruption. To fix this some steps in raminit must be ommited on the reset path. This includes receive enable calibration. To achieve this it stores receive enable results in RTC nvram for them to be rewritten on the resume path. Note: The same thing needs to be done on the S3 resume path. Calling a hot reset after raminit "outb(0x6, 0cf9)" works. Change-Id: I6601dd90aebd071a0de7cec070487b0f9845bc30 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18009 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-17mainboard/eve: select SOC_INTEL_KABYLAKERizwan Qureshi
eve is based on Kabylake SoC hence select the appropriate config. Change-Id: I756dda5a1924e83a02ac1cebb1907884f436a13f Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18314 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-17mainboard/poppy: select SOC_INTEL_KABYLAKERizwan Qureshi
poppy is based on Kabylake SoC hence select the appropriate config. Change-Id: Ie339a3991eeccb8a7dba983a2b5ab5d1c996ce9d Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18313 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-17mainboard/google/poppy: Generate digitizer node in SSDTFurquan Shaikh
Add support for generating digitizer node in SSDT using wacom i2c driver. BUG=None BRANCH=None TEST=Verified that the node shows up in SSDT. Change-Id: If7e1e2463778c2ff7263eff995def149457edcde Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18373 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-16mainboard/google/eve: Generate FPC device using SPI SSDT generatorFurquan Shaikh
Use the newly added SPI SSDT generator for adding FPC device. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully. Verified that the SSDT entry matches the entry in mainboard.asl Change-Id: I1b3c33f2b4337735a9725dd4eb6193b2455962d7 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18343 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-15siemens/mc_apl1: Make basic settings for booting the mainboardMario Scheithauer
This commit makes a basic adjustment for GPIOs, device tree, flash map and MRC settings. With these basic settings the mainboard boots into Linux lubuntu 4.8.0-22-generic using SeaBIOS. More adjustments will follow. Change-Id: Ia920d236814f2e6a9b777dd1e4b4feef0ddf7721 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/18292 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-02-15mainboard/google/reef: add sand variantYH Lin
Create the initial Sand variant which refers to the Reef. Sand is APL board that derives from reference board Reef. BRANCH=master BUG=chrome-os-partner:62200 TEST=Build (as initial setup) Signed-off-by: YH Lin <yueherngl@chromium.org> Change-Id: Iba8c5653b6176676c759d2b48063f0c0c6cde625 Reviewed-on: https://review.coreboot.org/18324 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-14google/eve: change touchpad HIDWei-Ning Huang
Change touchpad HID to use with the Google Centroiding Touchpad driver. BUG=chrome-os-partner:61088 TEST=`emerge-eve coreboot` Change-Id: I199ff46f1a93d3eccc8c694742585dcf37b2373f Signed-off-by: Wei-Ning Huang <wnhuang@google.com> Reviewed-on: https://review.coreboot.org/18359 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-14google/rambi: add explicit pull-down for ram-idMatt DeVillier
Some variants need the internal pull resistor on GPIO_SSUS_40 set explicitly to pull down rather than disabling the pull, in order for the ram-id to be read correctly via GPIO. Correct this by adding a function to enable and set the internal pull and define its use as needed in the board's variant.h. Chromium source: branch: firmware-gnawty-5216.239.B /src/soc/intel/baytrail/baytrail/gpio.h#418 /src/mainboard/google/gnawty/romstage.c#60 Test: boot 4GB Candy board and observe correct RAM id, amount detected Change-Id: I8823c27385f4422184b5afa57f6048f7ff2a25ab Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18309 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-14google/poppy: select NO_FADT_8042Jenny TC
Poppy doesn't support 8042 keyboard. Select NO_FADT_8042 to disable 8042 in FADT header. Kernel will not try to access 8042 region if 8042.FADT=0 BUG=chrome-os-partner:61858 TEST=Boot OS and verify FADT 8042 flag Change-Id: I00182eb4b059d4d9f0705d349dc98651e3955f0d Signed-off-by: Jenny TC <jenny.tc@intel.com> Reviewed-on: https://review.coreboot.org/18311 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-13mainboard/google/snappy: Update DPTF settingsWisley Chen
Update DPTF parameters based on thermal team test result. 1. Update TSR2 trigger points. TSR2 passive point: 70, critical point: 90 2. Set PL2 Max to 15W. BUG=chrome-os-partner:61383 BRANCH=reef TEST=build, boot on snappy, and verified by thermal team Change-Id: I8d01d6c1d7eabd359ceb131f3cd10965d4ac2c42 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/18318 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-11mainboard/google/reef: Increase PL1 sampling periodSumeet Pawnikar
Performance degradation seen with current PL1 throttling rate as 8 seconds for TSR1 sensor with Aquarium workload. After fine tuning PL1 throttling rate to 15 seconds, fps score improved. BUG=chrome-os-partner:60038 BRANCH=reef TEST=Built and tested on electro system Change-Id: I5cdebb08e00f0f28b88f1c6b2b1cafaeb8cdb453 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/18317 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
2017-02-11google/gru: add scarlet variantphilipchen
There will be more follow-up changes. BUG=chrome-os-partner:62377 BRANCH=None TEST=emerge-scarlet coreboot libpayload Change-Id: I9ca45598ff0ab12bf8063d16a86be564cf509390 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a020a9ba1228b15599e202972df0096f58b1b31c Original-Change-Id: I4804239483f8b35bc3703aa62c2a8fd642e0234a Original-Signed-off-by: philipchen <philipchen@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/433039 Original-Commit-Ready: Philip Chen <philipchen@chromium.org> Original-Tested-by: Philip Chen <philipchen@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18296 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2017-02-10ddr3 spd: move accessor code into lib/spd_bin.cPatrick Georgi
It's an attempt to consolidate the access code, even if there are still multiple implementations in the code. Change-Id: I4b2b9cbc24a445f8fa4e0148f52fd15950535240 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18265 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-10ddr3 spd: Rename read_spd_from_cbfs() to read_ddr3_spd_from_cbfs()Patrick Georgi
Since it checks for DDR3 style checksums, it's a more appropriate name. Also make its configuration local for a future code move. Change-Id: I417ae165579618d9215b8ca5f0500ff9a61af42f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18264 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-10device/dram: use global DIMM_SPD_SIZE Kconfig variablePatrick Georgi
Also make sure that no board changes behaviour because of that by adding a static assert. TEST=abuild over all builds still succeeds (where it doesn't if DIMM_SPD_SIZE isn't set to 128 bytes for boards that use the device/dram code). Change-Id: Iddb962b16857ee859ddcf1b52d18da9b3be56449 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18254 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-07mainboards/google/reef: Add support for tablet mode switch.Gwendal Grignou
Reef is a convertible add support for sending Tablet mode switch changes from EC to AP. Change-Id: I6dfddbfdb5a2ffbdfd77c5f49602bf68e9693a06 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/18277 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-07google/eve: Add support for tablet mode switch.Gwendal Grignou
Eve is a convertible add support for sending Tablet mode switch changes from EC to AP. Change-Id: I35133ebc1439852d0ceb88d7d679b37356b0869d Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/18276 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 15:51:49 +0000