Age | Commit message (Collapse) | Author |
|
X11SSM-F has a different board id (0896) than X11SSH-TF (089C). Use the
right id for the right board.
Change-Id: Ib0d5e66ce1a973f29a1da78f04f7ef677b260cd8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The variable is never read before being assigned a value at the end of
the function.
Change-Id: I3b42dcd564480005b2c520316933940d87b6e418
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Change-Id: Ia5916f191a7b1a846231b7e36924a16f3a658961
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Some of the common memory code that was being performed in
mainboard has moved into the soc to reduce redundant code.
This change adapts volteer to use Tiger Lake's new common code.
BUG=b:145642089, b:145238504, b:145564831
BRANCH=none
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer, boot to kernel, "cat /proc/meminfo" and verify it reports
"MemTotal: 8038196 kB".
Change-Id: I32c9b8a040728d44565806eece6cf60b6b6073b6
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=N/A
TEST=tested on facebook monolith
Change-Id: I36e652e66c66eeb770a5a5d987bb57c7eaa11382
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38749
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's really hard to power up this laptop with the lid closed so let's
make it open by default, as done on many other laptops.
Change-Id: I5bb2f716865c2bb569a4735f135842526043713c
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
If the panel-power sequencer is not configured, libgfxinit falls back
to very conservative defaults (210ms before EDID is probed). This
results in a boot penalty of >100ms (depending on how long it takes
to probe other ports).
Values are taken from the VBTs already checked in. Untested.
Change-Id: I189776ce8684b4c3c01acd6d2fc433ca33a050d5
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The second digital display connector is unused, but strapped as if it
were used.
Versions with a discrete GPU seem to use PM45 (i.e. no IGD), so we can
ignore these.
Based on schematics only, not tested.
Change-Id: Ibb47fdeef2adb9c574b7f3ec8e2b1d61d28f21da
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
T500 and W500 (Coronado-5) use both digital display connectors. Both
with the DP AUX channel implemented, so add DP2 to the list.
Versions with a discrete GPU don't use external, digital connectors
but seem to have the straps correctly configured. So we hopefully
won't have to handle these specifically.
Based on schematics only, not tested.
Change-Id: I31e1415eff2d5d00c4a231906e3d861d2a59b629
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The first digital display connector is unused, but strapped as if it
were on later revisions. The DP AUX channel of the second connector
is implemented, though, so add DP2 to the list.
Versions with a discrete GPU don't use external, digital connectors
but seem to have the straps correctly configured. So we hopefully
won't have to handle these specifically.
Based on schematics only, not tested.
Change-Id: I7d3e8b3a2123ddc407bb5a0cce86a3634b575f4a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Some board revisions have the straps for display port detection
wrongly configured. So with a single list covering all variants'
possible outputs, we make libgfxinit probe unimplemented ports
which may stall the GMBUS controller and delay the boot for some
hundred milliseconds.
This just copies the list to the various variants with different
display ports, so we can test the actual changes individually.
Change-Id: I48cdea1d71d9553b6bdbce432eae986996329239
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change tcc offset from 0 to 15 degree celsius for lick.
BUG=b:147198431
BRANCH=octopus
TEST=Build, and verify test result by thermal team.
Signed-off-by: Hash.Hung <hash1.hung@lcfc.corp-partner.google.com>
Change-Id: Ife6b02321145837e05c82f979998466b83317f86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38506
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add initial configuration for GSPI, I2C and UART ports and leave them in
disabled state.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I1cd7659337e6330a8ece34df247e399a085d21d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I12a63e5776619e5a7684cf1edad78b0fd6fac12c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38739
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure the GPIO groups to be routed to the GPE0 block.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ife4d0179bd9fe1785e971686478f7c76de805e87
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add compute and PCH Global device IDs with the concerned devices turned
off.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I6f226abd52d4a27535de6711e93355b5f84a1941
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Created a new Google baseboard named volteer from scratch.
BUG=b:142961277
BRANCH=master
TEST="emerge-volteer coreboot" compiles successfully.
Change-Id: I03a13f3df4e819ab9cf63ad69867c807d2a1b651
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add new SPD files for drallion:
1. Hynix H5AN8G6NDJR-XNC
2. Samung K4AAG165WA-BCWE
3. Samung K4A8G165WC-BCWE
BUG=b:148642500
TEST=Compile successfully and check SPD info in cbmem log.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I0e9b444f6f1e0c7e1da197fbd2e70e686568ab47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38731
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change GPP_C10 from pltrst to deep to meet the warmboot power sequence.
BUG=b:146935222
TEST=measure WWAN power sequence is meet spec
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia1513ed38fbc1c99a10a5fa531a78cc92a3ebfc2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
BUG=b:148410914
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I7dffa5c021787dca75786ead42164bd29ba56828
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable the dGPU on the Lenovo T440P. It uses the same code (roughly) of
the T430S. By default, it is set to be disabled however it can be
enabled via the nvram option enable_dual_graphics. Removed hybrid graphics
options too as they are not valid for the T440p. Tested on a T440P with
Ubuntu 18.04.4 with Kernel 5.3.0-29 (successful). Tested on same machine
with Windows 10 1909 (machine check exception bluescreen).
Change-Id: Idf8c2c0d1ae34bda8736448d3e350396e3cf7a93
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Since most of Bloog series SKUs need to disable DRRS support.
If Bloog and Unprovisioned SKUs then return vbt.bin to enable DRRS support,
return vbt_blooguard.bin for other SKUs to disable DRRS support.
Bipship follow blooguard to disable DRRS support.
BUG=b:148892903, b:147021309
BRANCH=octopus
TEST=emerge-octopus coreboot chromeos-bootimage
check i915_drrs_status shows DRRS supported NO when SKU ID is bipship.
Change-Id: I61f12d4ddea17a05255751fde2a5ce822dd2e782
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This CL has changes that allow us to enable a configurable
ramstage, and one change that allows us to minimize PCI
scanning. Minimal scanning is a frequently requested feature.
To enable it, we add two new variables to src/Kconfig
CONFIGURABLE_RAMSTAGE
is the overall variable controlling other options for minimizing the
ramstage.
MINIMAL_PCI_SCANNING is how we indicate we wish to enable minimal
PCI scanning.
Some devices must be scanned in all cases, such as 0:0.0.
To indicate which devices we must scan, we add a new mandatory
keyword to sconfig
It is used in place of on, off, or hidden, and indicates
a device is enabled and mandatory. Mandatory
devices are always scanned. When MINIMAL_PCI_SCANNING is enabled,
ONLY mandatory devices are scanned.
We further add support in src/device/pci_device.c to manage
both MINIMAL_PCI_SCANNING and mandatory devices.
Finally, to show how this works in practice, we add mandatory
keywords to 3 devices on the qemu-q35.
TEST=
1. This is tested and working on the qemu-q35 target.
2. On CML-Hatch
Before CL:
Total Boot time: ~685ms
After CL:
Total Boot time: ~615ms
Change-Id: I2073d9f8e9297c2b02530821ebb634ea2a5c758e
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Wait for HPD DP unless HDMI is plugged.
Some Type-C monitors do not immediately assert HPD. If we continue
to boot without HPD asserted, Depthcharge fails to show pictures
on a monitor even if HPD is asserted later.
Similar to that of b:72387533 however our DP&HDMI are beind a MST.
See commit d182b63347c744c on how this was done for mainboard/fizz.
BUG=b:147992492
BRANCH=none
TEST=Verify firmware screen is displayed even when a type-c monitor
does not immediately assert HPD. Verify if HDMI monitor is connected,
AP does not wait (and firmware screen is displayed on HDMI monitor).
Change-Id: I19d40056e58f1737f87fd07d62b07a723a63d610
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
PC Engines apu2 platform uses AGESA 1.0.0.4, because upstream AGESA
1.0.0.A doesn't work on apu2 - the platform doesn't boot. To properly
utilize AGESA 1.0.0.4 we need to adjust AGESA header to state, which
is compatible with AGESA 1.0.0.4 version.
Cut out the changes introduced in CB:11225 exclusively for apu2 board.
TEST=boot PC Engines apu2 and launch Debian Linux
Change-Id: I3d85ee14e35dae8079e8d552b6530a3867f65876
Signed-off-by: Piotr Kleinschmidt <piotr.kleins@gmail.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Enable acoustic noise mitigation, the slow slew rates are fast time divided by 8
and disable Fast PKG C State Ramp (IA, GT, SA).
BRANCH=hatch
BUG=b:143501884
TEST=build and verify that noise reduce.
Change-Id: I65f47288a7b1da98296fdba87ab5ca0c3a567aaf
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38212
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow HW change to use GPP_D15 as TS_RST. And change GPP_B21 from pltrst
to deep in order to met power off timing.
BUG=b:143733039
TEST=Check touch screen is functional in s0 and resume from s0ix
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ieec7eb78a05e653f271e348ed11f7e31c08bd5dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38665
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Enable PCIe port for dGPU
2. Change WLAN PCIe port from port 14 to port 7
BUG=b:147249494
TEST=Ensure dGPU and WLAN shows up with lspci.
Change-Id: Iea3292be7d8029c35847118228bbb773418632a1
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38399
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TGL FSP does pin mux for ISH related to pins by UPD(PchIshSpiEnable,
PchIshUartEnable, PchIshI2cEnable, PchIshGpEnable) but as default UPD
value is disabled, FSP doesn't do pin mux. So pin mux for ISH in gpio.c.
Pin mux for ISH for TGLRVP
ISHUART0: GPP_D13, GPP_D14 as NF1
ISHI2C0: GPP_B5, GPP_B6 as NF1
ISHGPIO0-7: GPP_D0~D3, GPP_D17~D18, GPP_E15~E16 as NF1
BUG=none
BRANCH=none
TEST=Build and boot to OS and check pinctl driver to check pin mux.
Check ISHUART0, ISHI2C0, ISHGPIO0-7 native function setting.
They should be NF1.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I1a9ba3a713527f5ce962659960418cd0f37dd262
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
BUG=b:139481313
Change-Id: I1a0911b7967e5823fdce98195420728bd38c80f6
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Set HeciEnabled = 1 on puff device tree to turn on
Intel ME communication interface.
BUG=b:143232330
BRANCH=None
TEST=Build puff and boot up OS.
ran lspci and confirmed there is a HECI device.
00:16.0 Communication controller: Intel Corporation Device 02e0
Change-Id: I2debb885022ae31e395869d014a91824b5dd980c
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
It is found that keyboard backlight in T440p is enabled by clearing
bit 3 of EC RAM 0x01. This patch sets has_keyboard_backlight in
devicetree.cb and also corrects the CMOS configuration.
Change-Id: Ib4c2b1591d26e2bb33f9549e3933efe9a6e0b043
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Dennis Witzig <dennis@wtzg.de>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Asserting reset in RO instead of in RW has no impact on security or
performance, but it does limit improvements to this process later.
This fix removes reset line control from RO and makes these variants
consistent with other hatch variants.
This fix reinforces the concept from commit fcd8c9e99e
(hatch: Fix FPMCU pwr/rst gpio handling).
BUG=b:148457345
TEST=None
Change-Id: I12dc0c3bead7672e2d3207771212efb0d246973a
Signed-off-by: Craig Hesling <hesling@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Configure GPP_H22 as output pin for BOMACO mode enabled.
BOMACO stands for "Bus Off Memory Alive Core Off".
BUG=b:146081272
TEST=emerge-mushu coreboot
Change-Id: Ic35e55771d76b7254bcb457fcb38f37433b9ad67
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38210
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6408cb3c9ef1227d8cf7df12d192b10341205e2c
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37944
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove EC_HOST_EVENT_MKBP from kohaku's EC_SCI_EVENTS mask, so that
MKBP events don't generate an SCI. The EC is also being changed to use
host events to wake up the system, and use the EC_INT_L line for MKBP
IRQ signalling. Otherwise, there would be two IRQs generated for MKBP
events.
BUG=b:144122000
BRANCH=firmware-hatch-12672.B
TEST=System shows ACPI interrupt as the wakeup IRQ, and the
MKBP host event is properly processed as well.
Change-Id: I9ff964e38e66ccb953a1adad5a936a9da6e4f3a1
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38654
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If6be9cffe97dcd8f733e3bd5a67a408dd817005a
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37295
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch overrides CPU flex ratio on hatch in order to get
better boot time numbers in vboot_reference.
BUG=b:142264107
TEST=Able to save ~100ms of platform boot time while running with
lower cpu flex ratio (i.e. freq ~1500MHz)
Without this CL
1100:finished vboot kernel verification 802,443 (148,108)
With this CL
1100:finished vboot kernel verification 685,382 (46,496)
Change-Id: Idd1d1c0c04b1f742f17227a1335f27a956ee940d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36865
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4821c48ccac92f412126cea0f22cca5fd8bf8647
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
|
|
Turns out when going into S0ix we want the kernel to toggle de-assert to 0 for
the ISOLATE# pin on the NIC for S0ix not to be woken by PCIe traffic on PCH.
Upon resume the ISOLATE# pin on the NIC is then re-asserted for it to become
lively again.
BUG=b:147026979
BRANCH=none
TEST=Boot puff and do 1500 cycles of S0ix.
Change-Id: I3470e1edd93b461b66fc6444541a64339bcdcce3
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38523
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I66e2cfd041f9a93668e41d79c40cec9cb1bd917e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
pin mux for IMGCLKOUT_0 and IMGCLKOUT_1
BUG=none
BRANCH=none
TEST=Build and boot to OS and check pinctl driver to check pin mux for
Image clocks pins(GPP_D4, GPP_H20)
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ifb0c2b17dd481ef6c19bdf9ee84f47ef08d7b9a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Change-Id: Ibd6f6bf7983382901a5327121d277606f609eca4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This makes diff between boards even smaller in some cases.
Change-Id: I42ecaf5de657275708ddaf2c926fe31fe16a7220
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
TGLRVP uses DdiPort1Hpd and DdiPort1Ddc. So only enable them.
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board and check FSP log or DP port pin mux
from pinctl driver.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ief6376ba59c77340e272923958b6b5f0a1456d9b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38529
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With UART3 and 4 enabled, the serial console in LinuxBoot crashes. This
is a short-term solution until we found and fixed the original bug.
Change-Id: I75cb387ef12944232b51f6d8d41810bb27754b05
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Add helper functions to get board's sku_id and fw_config. Enable
EC_GOOGLE_CHROMEEC_BOARDID to get board_id. Add board's SKU ID and
OEM name into SMBIOS table.
BUG=b:144768001
TEST=Build Test.
Change-Id: Id1729e245accf5acc29307a22721362fb1ce0878
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38551
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:148221635
TEST=build;install;lspci
Change-Id: I1732f7fe64ace41a721a2d6a964988efc97b2579
Signed-off-by: Jeff Chase <jnchase@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38550
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch creates a new commonlib/bsd subdirectory with a similar
purpose to the existing commonlib, with the difference that all files
under this subdirectory shall be licensed under the BSD-3-Clause license
(or compatible permissive license). The goal is to allow more code to be
shared with libpayload in the future.
Initially, I'm going to move a few files there that have already been
BSD-licensed in the existing commonlib. I am also exracting most
contents of the often-needed <commonlib/helpers.h> as long as they have
either been written by me (and are hereby relicensed) or have an
existing equivalent in BSD-licensed libpayload code. I am also
relicensing <commonlib/compression.h> (written by me) and
<commonlib/compiler.h> (same stuff exists in libpayload).
Finally, I am extracting the cb_err error code definitions from
<types.h> into a new BSD-licensed header so that future commonlib/bsd
code can build upon a common set of error values. I am making the
assumption here that the enum constants and the half-sentence fragments
of documentation next to them by themselves do not meet the threshold of
copyrightability.
Change-Id: I316cea70930f131e8e93d4218542ddb5ae4b63a2
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The GLK bootblock seems(?) to be hard limited to 32KB and some Octopus
variants are so close to that that they only have 0.5KB left. This is
blocking development of new core features, so let's disable the
bootblock console to gain a couple of KB back (like we already did on
RK3288).
There are probably other opporunities for code size reduction here (e.g.
it seems that almost half(!) of that whole bootblock size is taken up by
devicetree.cb structures), but I'm not familiar enough with the platform
to dig into them.
Change-Id: I05b4ecf5abef7307e3d0a81db04a745ff3da0c42
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38521
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All variants of ga-b75m-d3h lack ACPI definitions for legacy PCI
slots, which causes IRQ issue if it gets legacy PCI card installed.
The missing definitions (mainly Interrupt Routing Table) are added to
fix that.
NOTE: The added definitions are actually for ga-b75-d3v, but since
they form superset of definitions needed by ga-b75m-d3{h,v}, they can
be applied to all three existing variants with suitable preprocessor
instructions.
Change-Id: Id79c759a5fadb38c2873edc07293cbb14401ac9a
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=b:148252157
BRANCH=none
TEST=Put a puff in s0ix, send a WoL magic packet.
Change-Id: I4a08a2f5505d00909c9301315fcf72f687141f91
Signed-off-by: Sam McNally <sammc@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
The System76 Lemur Pro (lemp9) is an upcoming laptop computer. Support
in coreboot is developed by System76 and provided as the default
firmware option. Testing is done on a pre-production model expected to
be identical from a firmware perspective to the production model.
Working:
- Payload
- Tianocore
- CPU
- Intel i7-10510U
- Intel i5-10210U
- EC
- ITE IT5570E running https://github.com/system76/ec
- Backlit Keyboard, with standard PS/2 keycodes and SCI hotkeys
- Battery
- Charger, using AC adapter or USB-C PD
- Suspend/resume
- Touchpad
- GPU
- Intel UHD Graphics 620
- GOP driver is recommended, VBT is provided
- eDP 14-inch 1920x1080 LCD
- HDMI video
- USB-C DisplayPort video
- Memory
- Channel 0: 8-GB on-board DDR4 Samsung K4AAG165WA-BCTD
- Channel 1: 8-GB/16-GB/32-GB DDR4 SO-DIMM
- Networking
- M.2 PCIe/CNVi WiFi/Bluetooth
- Sound
- Realtek ALC293D
- Internal speaker
- Internal microphone
- Combined headphone/microphone 3.5-mm jack
- HDMI audio
- USB-C DisplayPort audio
- Storage
- M.2 PCIe/SATA SSD-1
- M.2 PCIe/SATA SSD-2
- RTS5227S MicroSD card reader
- USB
- 1280x720 CCD camera
- USB 3.1 Gen 2 Type-C (left)
- USB 3.1 Gen 2 Type-A (left)
- USB 3.1 Gen 1 Type-A (right)
Not working:
- TPM2 - SPI bus 0, chip select 2 is used. Chip selects other than 0
are not currently supported by the intel fast_spi driver.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: Ib0a32bbc6f89a662085ab4a254676bc1fad7dc60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add MIPI camera ACPI
Update GPIO pin mux for camera
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board and check camera
Simple test method to check camera: capture image by below commands from
OS console
>media-ctl -V "\"Intel IPU6 CSI-2 5\":0 [fmt:SGRBG10/3280x2464]"
>media-ctl -V "\"Intel IPU6 CSI-2 5\":1 [fmt:SGRBG10/3280x2464]"
>media-ctl -l "\"ov8856 18-0010\":0 -> \"Intel IPU6 CSI-2 5\":0[1]"
>media-ctl -V "\"Intel IPU6 CSI2 BE\":0 [fmt:SGRBG10/3280x2464]"
>media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [crop:(0,0)/3280x2464]"
>media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [fmt:SGRBG10/3280x2464]"
>media-ctl -l "\"Intel IPU6 CSI-2 5\":1 -> \"Intel IPU6 CSI2 BE\":0[1]"
>media-ctl -l "\"Intel IPU6 CSI2 BE\":1 -> \"Intel IPU6 CSI2 BE capture\":0[1]"
>yavta -u -c5 -n5 -I -s 3280x2464 --file=/tmp/frame-#.bin -f SGRBG10
$(media-ctl -e "Intel IPU6 CSI2 BE capture")
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4189e96f68f0e64e0860405e00eeab84564b86be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37863
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Perform EC initialization in bootblock and ramstages. Add associated ACPI
configuration.
BUG=b:144768001
TEST=Build Test.
Change-Id: Ib31ae190818c8870bdd46ea6c3d9ca70dc0485cc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable building for Chrome OS and add associated ACPI configuration.
BUG=b:144768001
TEST=Build Test
Change-Id: Ibb94849a903e4d4364d817de8988a430cd717e4c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add stub implementation of smihandler.
BUG=b:144768001
TEST=Build test.
Change-Id: I7ab25888812bfb4578915e342b14355ccd15f5cc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable ACPI configuration and add DSDT ACPI table.
BUG=b:144768001
TEST=Build Test
Change-Id: I0aa889cd52bff3e1e9ff7b7b93ec1000045bcfd2
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add stubbed out GPIO configuration and perform GPIO initialization
during bootblock and ramstage.
BUG=b:144768001
TEST=Build Test
Change-Id: I1397b6a433e5046650f64f7eb9a84c51eb0c7441
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38278
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The bits cleared by this have to do with dGPU power, which this
board lacks.
TESTED: x201 still boots.
Change-Id: I441743f76afc7bbbee930a1c8116035e85d94e52
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36911
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Optane memory module shows up as 2 NVMe devices in x2 config - NVMe storage
device and NVMe Optane memory. Storage device uses rp9 and optane memory
uses rp11. This patch enables rp11. Please note that these two share clk pins.
This is also dependent on pciecontroller3 config to be set as 2x2 instead of
1x4 in fit configuration in IFWI.
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board from Optane and check 2 NVMe devices
from lspci
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ic81244bebac78102af7ba6308ab64b18c886f839
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
GPIOs are divided into different communities. Each community
consists of one or more GPIO groups. We need to configure the
groups in coreboot so that they are mapped properly.
GPIO comuinities in coreboot should match with the kernel gpio
communities also. Kernel reads the ASL file from coreboot. This
patch adds the proper community mapping in ASL code to match with
kernel code. In gpio_soc_defs.c file we are indexing the groups
correctly. In gpio.h file we define all the gpio devices as kernel
populates sysfs with separate gpio device for each community. This
patch is created based on Intel Tiger Lake Processor PCH Datasheet
with Document number:575857 and Chapter number:27.
BUG=b:144680462
BRANCH=none
TEST=Build and boot tigerlake rvp board. In /sys/kernel/debug/pinctrl
verify INTC34C5:0<1-3> listing all the pins for each community.
e.g., #cat /sys/kernel/debug/pinctrl/INT34C5:00/pins should list
all the community 0 pins.
Change-Id: I40c386db060d84c1b7fba9c587f960d6a92f84ba
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Remove fixed IccMax values for U22 CPU.
IccMax will be selected by CPU SKU.
BUG=b:148110226
BRANCH=None
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to device and checked IccMax[1].
Change-Id: Ifcd31ad5b608ce599d4294a6522fdda022f8a177
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
BUG=N/A
TEST=build
Change-Id: Ifb45bc1f7f4d3744124d6797fb4c791fd5f227ca
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Enable both SATA ports for TGLRVP.
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board with SATA memory
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I9f35682982a6c06522e58b0bbd7162ff02c37f32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38505
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add a TEMP_SENSOR3
2. Update DFPS (fan performance state) table with values received
from thermal team
3. Update PL1 override to 15W
4. Update PL2 override to 51W
BRANCH=hatch
BUG=b:147792204
TEST=build and verify by thermal team
Change-Id: I21c17c09a097c963f4dd1b7d5f8212c83a639dc3
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38025
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This CL allows MKBP events from the EC to wake the system from suspend
states.
BUG=b:144122000
BRANCH=firmware-hatch-12672.B
TEST=Verify that MKBP events generated from EC will wake the system
from S0ix.
Change-Id: I8a0d2c7ed89fa1ea937a08c3082cc5d3e782efff
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Align the fbg1701 sleepstates implementation with monolith.
BUG=N/A
TEST=build
Change-Id: I3a715781bf51da41d6954463ad38ed94b0dfd217
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
The monolith board doesn't support the S3 and S4 states because of the
watchdog and failover mechanisms.
Remove S3 and S4 from the available sleepstates.
BUG=N/A
TEST=build
Change-Id: I01f67d8bb3f9e45caef748caca91eeb6859d7393
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
According to VRTT report, add ac/dc loadline configuations in puff device
tree.
BUG=b:147206535
BRANCH=None
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to puff and checked the log.
All ac/dc loadline configs were set correctly.
Change-Id: Ia806de23a1fefcaac3ce9a462a8a04eee5eabcae
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Jinlon will use EC to control fan, so remove DPTF fan control.
BUG=b:141259174
TEST=emerge-hatch coreboot chromeos-bootimage
Change-Id: I8ada4fe72eee260fecf45d00510da8b91e3f10a4
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
ONBOARD_VGA_IS_PRIMARY is selected if board selects
DRIVERS_LENOVO_HYBRID_GRAPHICS.
See commit 35abe73e with Change-Id:
I6594fbb957c9a8135fe670d38b5755adf29d2dff ("mb/lenovo/t430: Fix Dual
Graphics").
Change-Id: I39687e5cd34979fd4318978f5aa46ac6cdf721e8
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I6c7bbb89af88cce1a53c21a4b4d8bc1c284e1cb2
Signed-off-by: Ivan Vatlin <jenrus@tuta.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use information provided by AGESA to fill the SMBIOS memory tables.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I45bb2fc36cf0c01670e9fc8559d3a6183ea271f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Following the example of change CB:37737 (ee8f969).
Switching was done by moving a SIO configuration and
the clocks setup from 'romstage.c' to 'bootblock.c'.
Tested-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Change-Id: I2e710ac61843c09a055523c7971e4c05bae56a37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Fix devicetree to advertise the correct USB names and types
in the generated ASL.
BUG=b:146437991
BRANCH=none
TEST=booted and inspected the reported generated ASL.
Change-Id: I133b4db444f9a5f0a36d8e976ae490f24cf307d8
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Only the ACPI code needs to be extended, as smihandler.c already
supported it. The _Q50 Method is just _Q18 with changed name.
On Linux, pressing the undock button does nothing, so the only safe
way to undock is to press Fn+F9. With this patch, when the undock
button is pressed, the green LED lights up, and undocking is safe.
Change-Id: Iaaecad031bb1f39dd1a778d0c8eaea6bce9e0f57
Signed-off-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38446
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Mimoja <coreboot@mimoja.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Nuvoton NCT5104D GPIO IO VLDN and define an IO base address
unused by any peripheral for GPIO use.
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I034c5d0169b8d97eac97a20c92c22816fd674f79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The mainboard ASL code contained a power button definition. This is not
required as the system uses the standard ACPI power button.
Remove the PWRB device from ASL.
BUG=N/A
TEST=tested using fwts on a facebook monolith.
Found-by: fwts 19.12.00
Change-Id: I25a842539ee2e8febc8a1ae88843a71ccb4ee68e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38133
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The mainboard ASL code contained a power button definition. This is not
required as the system uses the standard ACPI power button.
Remove the PWRB device from ASL.
BUG=N/A
TEST=build
Found-by: fwts 19.12.00
Change-Id: I4fac1411fd99475551bc970818759649f80b3f0e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38134
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
NOTE: The ME interface was disabled on folio_9470m and revolve_810_g1.
It is assumed that they were ported while the ME was in an abnormal
state (usually due to me_cleaner usage), and that it should be enabled.
In any case, the MEI device is hidden if the ME fails to boot already.
Change-Id: Ibf32a034653946f49f72a2c19c41a4033964ef83
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Update Makefile.inc so as to add the SPD data when needed. Tested
building other variants, no spd.bin gets added because they don't select
GENERIC_SPD_BIN.
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I0cda3f839baa227ce6a4b8f0510934125e5afb59
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I65696c5739469b33253c22c1d5a65cc31ef3a421
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Since this board does not have integrated graphics, do not install the
INT15 handler if it is not selected in Kconfig.
NOTE: Since cmos options are not very flexible, this board ends up with
a spurious gfx_uma_size option. Other than that, everything is the same.
Tested with BUILD_TIMELESS=1, binary does not change when ignoring the
cmos options.
Change-Id: I2ebcfd5160773bf98a3d23e797a89e290063d112
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I6dbecb0b4d38ed4af8966f5391fce1f2c9c5d182
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I17b6ac9ac2433b760e125a1ce708d3b422b632b5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: Idc4d0a3d7384ad4e5a3eb3d7ecefaa2f35093ac0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Get ready to squash all the HP Sandy Bridge and Ivy Bridge laptops
together, so as to factor out lots of repeated code.
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I0b68e524b57e3705e91e3cd98be5571b3554bd67
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change stapm percentage to 80 and time to 2000 seconds make
DUT meets Lenovo spec and pass CTS respectively.
BUG=b:147333429
TEST=build firmware and install it to DUT and run CTS relevant
test, check temperature whether meets spec.
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I6a2f059fbd5c89f897cfb46d1f7a82b0923edb17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38443
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Disable Windows driver DPST function
- Set POST resolution to 1800x1200
- Set POST brightness to 225 (0-255 scale)
Test: Boot Windows on EVE, verify display backlight control
functional and no lock ups from switching in/out of tablet mode.
Change-Id: Ida64a44df2449f1ff0dc5c8d0ec7b40a183566a7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Base on SATA SI report to fine tune the strength for port 1.
BRANCH=none
BUG=b:147351936
TEST=build and test SATA port works fine.
Change-Id: Ib82b7e5df32b4ce794682781f33c44dfeb6e68bf
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Enable the VBOOT_ALWAYS_ALLOW_UDC option to actually enable the xDCI
controller.
BUG=N/A
TEST=build
Change-Id: Ib51f2c82e69db83cebceb71ba5f1305764e0feca
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Update Tigerlake RVP UP3 devicetree to reflect devices used by
tglrvp_up3.
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: Idd0d9efe0ab4e050d2160f7662e4dc40a002672f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37929
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update chip files to include :
- Update chip.c based on TGL FSP
- Update chip.h based on TGL FSP
- Update Kconfig : Define CONFIG_MAX_PCIE_CLOCKS for chip.h update
- Update pmc_utils.c and JSL devicetree for build failure
Reference
PCH EDS#576591 vol1 rev1.2
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: Ie1518a7ffa69079fe82232afe229d9e1ffe29067
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37783
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tigerlake SoC doesn't have GPIO defined for GPP_G. so compilation is
failing due to this.
We will update correct gpio for sd card detect once we have Jasper Lake
soc gpio patch.
partner bug for tracking: https://ticket.coreboot.org/issues/251
BUG=None
BRANCH=NONE
TEST='jslrvp' mainboard builds successfully
Change-Id: I097b2f3a4fef1a487495a4aa9d2bcf88aa64f017
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Change-Id: I6724637c7333ae6be7ada3e8ebe878b2a1061dd1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use 'irremovable' over 'unremovable'
Change-Id: Id305dbe56a93740abc49d85d11402d1b63989dad
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37527
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Base on USB SI report to fine tune the strength and correct
some OC pin settings.
BRANCH=none
BUG=b:147206010
TEST=build and test all usb ports function work fine.
Change-Id: Idbee5cdddf3a83f97109214a95e0f9875b3b3f8f
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
It was never filled it, it probably never will be filled in, so stop
the pretense.
Change-Id: I7632b763b8518304d36a818ce262cc127f95b9f0
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=N/A
TEST=build
Change-Id: Id7267aa6d4266bb7807fb3c25b5e2704c8d81df7
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38430
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|