summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Expand)Author
2015-08-27glados: Fix SPD part number for Hynix H9CCNNN8JTBLARDuncan Laurie
2015-08-27glados: Add touchscreen device in ACPIDuncan Laurie
2015-08-27glados: Clean up mainboard ACPI devicesDuncan Laurie
2015-08-27kunimitsu: Enable SMBus device in devicetreeNaveen Krishna Chatradhi
2015-08-27Kunimitsu : FAB3 Adding BoardId supportpchandri
2015-08-27Kunimitsu: enable deep S5Naveen Krishna Chatradhi
2015-08-26ChromeOS mainboards: Move more Kconfig symbols under CHROMEOSMartin Roth
2015-08-26hp/dl165_g6_fam10/Kconfig: remove unused QRANK_DIMM_SUPPORTMartin Roth
2015-08-26Google Kconfig: Add MAINBOARD_HAS_NATIVE_VGA_INIT in good placesMartin Roth
2015-08-23AMD Kconfig: Remove QRANK_DIMM_SUPPORT from unsupported platformsMartin Roth
2015-08-21ChromeOS: Fix Kconfig dependenciesMartin Roth
2015-08-20mainboard: Get CHROMEOS/MAINBOARD_HAS_CHROMEOS right (again)Alexandru Gagniuc
2015-08-19Kunimitsu: Fix Wifi, kepler RP mapping and enable ClkReqSupportPratik Prajapati
2015-08-19glados: use macros for magic numbers in ASLAaron Durbin
2015-08-19Kunimitsu: Enable root ports and clkreqsPravin Angolkar
2015-08-19Kunimitsu: Update Mainboard ASL for Kunimitsu FAB3 with D0 MCPNaveen Krishna Chatradhi
2015-08-19Kunimitsu: Update Gpio table for kunimitsu FAB3 variantNaveen Krishna Chatradhi
2015-08-17Fix Kconfig: ALWAYS_LOAD_OPROM has unmet dependency VGA_ROM_RUNMartin Roth
2015-08-14emulation/qemu: Serialize IQCR methodPaul Menzel
2015-08-14glados: make EC_SCI_L workAaron Durbin
2015-08-14glados: make EC_SMI_L functionalAaron Durbin
2015-08-14skylake: remove ec_smi_gpio and alt_gp_smi_enAaron Durbin
2015-08-14kunimitsu sklrvp: remove unused IedSizeAaron Durbin
2015-08-14glados: enable SMBus deviceAaron Durbin
2015-08-14glados: move to native gpio configurationAaron Durbin
2015-08-13glados: Enable wake from EC via LAN_WAKE#Duncan Laurie
2015-08-13getac/p470: enable early cbmem initPatrick Georgi
2015-08-13getac/p470: Enable native VGA initPatrick Georgi
2015-08-13getac/p470: Add C-State valuesPatrick Georgi
2015-08-11getac/p470: Clean up SIO access in ACPIPatrick Georgi
2015-08-10google/stout: Fix ELOG related ifdefsPatrick Georgi
2015-08-10getac/p470: enable GPU devices in devicetreePatrick Georgi
2015-08-10getac/p470: Make suspend-to-ram workPatrick Georgi
2015-08-09riscv-spike: support for Spike emulation of riscvThaminda Edirisooriya
2015-08-09license headers: Drop FSF addresses againPatrick Georgi
2015-08-08google/urara: Stub out get_write_protect_state()Patrick Georgi
2015-07-30gigabyte/ga-b75m-d3h: Update device treeDamien Zammit
2015-07-30amd/bettong: Enable fan controlWANG Siyuan
2015-07-29skylake: clean-up pei_datarobbie zhang
2015-07-29veyron_rialto: Select PHYSICAL_REC_SWITCHJonathan Dixon
2015-07-29veyron: update mickey sdram-lpddr3-samsung-2GB.incjinkun.hong
2015-07-29Revert "smaug: Do not gate XUSB partitions"Andrew Bresticker
2015-07-29google/stout: Implement functions required by CHROMEOSPatrick Georgi
2015-07-29google/parrot: Implement functions required by CHROMEOSPatrick Georgi
2015-07-29google/butterfly: Implement functions required by CHROMEOSPatrick Georgi
2015-07-24glados: Support reading memory strap GPIOs to select SPDDuncan Laurie
2015-07-24glados: Enable internal pullup for EC_IN_RWDuncan Laurie
2015-07-24glados: Add ACPI configs for speaker amps and codecBen Zhang
2015-07-24rockchip: rk3288: extend jerry backlight vcc_led delay timehuang lin
2015-07-23sklrvp: Add board_info fileStefan Reinauer
2015-07-23nvidia southbridges: don't touch 0x78 in LPC bridge with Fam10hJonathan A. Kollasch
2015-07-23google/veyron_rialto: enable VIRTUAL_DEV_SWITCHJonathan Dixon
2015-07-23glados: Fix the write protect GPIO exported in ACPIDuncan Laurie
2015-07-23glados: Add SPD manufacturer and part numberDuncan Laurie
2015-07-23glados: Set the write protect GPIODuncan Laurie
2015-07-23cyan/strago: disable Ambient Light Sensor deviceJagadish Krishnamoorthy
2015-07-23intel/strago: BCRD2: Enable Realtek Audio codec on I2C4Jenny TC
2015-07-22winent/mb6047: move power_on_after_fail out of RTC century byteJonathan A. Kollasch
2015-07-21google/cyan: Configure EC_IN_RW signal as gpio inputHannah Williams
2015-07-21intel/cyan: Fix crossystem "wpsw_cur" statusHannah Williams
2015-07-21Kunimitsu: Add comment and separate routinesLee Leahy
2015-07-21Kunimitsu: Remove address from copyright noticeLee Leahy
2015-07-21Cyan: Tune charger current limit in performance states table.li feng
2015-07-21Glados: Update Serial IO modes in devicetreeNaveen Krishna Chatradhi
2015-07-21kunimitsu: Update Serial IO modes in devicetreeNaveen Krishna Chatradhi
2015-07-21Sklrvp: Update Serial IO modes in devicetreeNaveen Krishna Chatradhi
2015-07-21google/glados: add new boardPatrick Georgi
2015-07-21Skylake: Only support UART2 as debug port, clean up the restNaveen Krishna Chatradhi
2015-07-21cyan/strago: Disable wwanJagadish Krishnamoorthy
2015-07-21Sklrvp: Select PCIEXP_L1_SUB_STATE config symbolNaveen Krishna Chatradhi
2015-07-21cyan: Enable EC software syncRavi Sarawadi
2015-07-18intel/kunimitsu: Fix Kconfig symbol typePatrick Georgi
2015-07-17intel/sklrvp: remove trailing whitespacePatrick Georgi
2015-07-17mainboard/google: Add Braswell based Cyan boardLee Leahy
2015-07-17mainboard/intel: Add Skylake based Kunimitsu boardLee Leahy
2015-07-17mainboard/intel: Add Skylake based RVP3 boardLee Leahy
2015-07-17mainboard/intel: Add Braswell based Strago boardLee Leahy
2015-07-16foster: correct odmdata in odmdata.cfgYen Lin
2015-07-16smaug: correct odmdata in odmdata.cfgYen Lin
2015-07-16foster: add sdram_configs.cYen Lin
2015-07-16smaug: ramstage: include sdram_configs.cYen Lin
2015-07-16smaug: Use VNBN_FLASH instead of VBNV_ECFurquan Shaikh
2015-07-16smaug: Increase drive strength for QSPI PinmuxFurquan Shaikh
2015-07-16AMD Merlin Falcon: Mask bit 31 of BIST while doing BIST checkzbao
2015-07-14getac/p470: initialize timestamps in romstagePatrick Georgi
2015-07-14azalia: fix up and clean up shrinkage of boilerplate codeJonathan A. Kollasch
2015-07-13x86: flatten hierarchyStefan Reinauer
2015-07-13smaug: Set LDO2 voltage to 1.8VFurquan Shaikh
2015-07-09veyron_{brain,danger,mickey,romy}: Select PHYSICAL_REC_SWITCHDavid Hendricks
2015-07-09smaug: Update PMIC settingsFurquan Shaikh
2015-07-09veyron_danger: Enable developer mode switchDavid Hendricks
2015-07-07marvel/bg4cd: move timestamp init to SoC codePatrick Georgi
2015-07-07rk3288: Use timestamp region for pre-cbmem timestampsFurquan Shaikh
2015-07-07x86: Drop -Wa,--divideStefan Reinauer
2015-07-07amd/lamar: drop unused value from mainboard_intr_data[]Stefan Reinauer
2015-07-07mainboard/msi/ms7135: remove bogus MADT IRQ override for timerJonathan A. Kollasch
2015-07-06veyron*: Kill SKIP_DISPLAY_INIT_HACKDavid Hendricks
2015-07-06veyron_rialto: Use VOP_MODE_NONE for display init.David Hendricks
2015-07-06veyron_brain: Add basic HDMI supportDavid Hendricks
2015-07-06veyron_*: Set vop_mode in devicetree.cb filesDavid Hendricks