summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2013-03-13Eagleheights DSDT: Grant OS control through OSCMike Loptien
Change the OSC method to actually grant control of PCIe capabilities to the OS instead of granting no control. I believe the logic was backwards in the original commit. Bits should be set when granting control and cleared when not granting control. By setting the return value to 0x00, we effectively tell the OS that it cannot control any PCIe capability. See section 6.2.9 of the ACPI spec version 3.0 for more information. This edit is a duplication of the OSC method that is in the src/southbridge/intel/bd82x6x/pch.asl file. Change-Id: Id2462ab12203afceb9033f24d06b4dfbf2236d2e Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2714 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13exynos5250/snow: enable branch predictionDavid Hendricks
This enables branch prediction. We can probably find a better place to do this, but for now we'll do it in snow's romstage main(). Change-Id: I86c7b6bc9e897a7a432c490fb96a126e81b8ce72 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2701 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13src/mainboard: Drop redundant `CHIP_NAME` again for new portsPaul Menzel
Since commit »Drop redundant CHIP_NAME in mainboard.c« (a93c3fe7) [1] `CHIP_NAME` is unneeded for mainboards as the name is composed automatically in `src/devices/root_device.c` from the strings in Kconfig. Unfortunately the ports for Google Butterfly, Link and Parrot as as well as IEI PM-LX2-800-R10 introduced CHIP_NAME again. So drop it again too. [1] http://review.coreboot.org/1635 Change-Id: Ice7577a2a5c6070e196f2647c440b7a8e140e27e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2708 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13exynos5250/snow: call PMIC's power_init() functionDavid Hendricks
Call the power_init() function. We appear to have forgotten about it when deprecating lowlevel_init_subsystems(), but it didn't seem to cause problems until we got to doing more interesting stuff recently. There are some clean-ups to do from the original code, such as not attempting to configure I2C from PMIC code, which we'll get around to in follow-up patches. (Credit to Gabe for spotting this) Change-Id: I6a59379e9323277d0b61469de9abe6d651ac5bfb Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2699 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-11ASUS M5A88-V: Kconfig: Fix mainboard model namePaul Menzel
Despite everywhere the model name M5A88-V is used, in Kconfig the string M5A88PM-V is used. Searching for that model string on the WWW does not return anything which is unrelated to coreboot, so change that string to M5A88-V. Change-Id: I25cf9d4a5fc3f9b9356e8616452066ebf873f44c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2613 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: QingPei Wang <wangqingpei@gmail.com>
2013-03-08Persimmon DSDT: Add secondary bus range to PCI0Mike Loptien
Adding the 'WordBusNumber' macro to the PCI0 CRES ResourceTemplate in the Persimmon DSDT. This sets up the bus number for the PCI0 device and the secondary bus number in the CRS method. This change came in response to a 'dmesg' error which states: '[FIRMWARE BUG]: ACPI: no secondary bus range in _CRS' By adding the 'WordBusNumber' macro, ACPI can set up a valid range for the PCIe downstream busses, thereby relieving the Linux kernel from "guessing" the valid range based off _BBN or assuming [0-0xFF]. The Linux kernel code that checks this bus range is in `drivers/acpi/pci_root.c`. PCI busses can have up to 256 secondary busses connected to them via a PCI-PCI bridge. However, these busses do not have to be sequentially numbered, so leaving out a section of the range (eg. allowing [0-0x7F]) will unnecessarily restrict the downstream busses. This change will apply to other AMD mainboards and will be in a different commit. Change-Id: I44f22bc03a0dcbcd2594d4291508826cc2146860 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2592 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-08AMD Inagua: Use SPD read code from F14 wrapperKimarie Hoot
Changes: - Get rid of the inagua mainboard specific code and use the platform generic function wrapper that was added in change http://review.coreboot.org/#/c/2497/ AMD f14: Add SPD read functions to wrapper code - Move DIMM addresses into devicetree.cb - Add the ASF init that used to be in the SPD read code into mainboard_enable() Notes: - The DIMM reads only happen in romstage, so the function is not available in ramstage. Point the read-SPD callback to a generic function in ramstage. Change-Id: Id05227fcf18c6ab94ffe1beb50b533ab7b0535db Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-on: http://review.coreboot.org/2607 Reviewed-by: Martin Roth <martin.roth@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-08AMD CIMx SB800 boards: platform_cfg.h: Integrate Kconfig SATA Mode choicePaul Menzel
Currently for Advansus A785E-I, ASRock E350M1 and ASUS M5A88-V despite what is chosen in Kconfig »Chipset« menu item, $ more .config […] # CONFIG_ENABLE_IDE_COMBINED_MODE is not set CONFIG_IDE_COMBINED_MODE=0x1 # CONFIG_SB800_SATA_IDE is not set CONFIG_SB800_SATA_AHCI=y # CONFIG_SB800_SATA_RAID is not set CONFIG_SB800_SATA_MODE=0x2 […] the SATA controller is put into IDE mode. $ lspci -nn | grep SATA 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (rev 40) Commit »sb800: Add sata ahci/raid mode kconfig option« (d4a0e7d0) [1] added the options above to configure the mode using Kconfig and some SB800 boards were adapted already. For example commit »persimmon: sb800 sata mode configure update« (1386fa74) [2] did so for AMD Persimmon. Doing the same by assigning the Kconfig variable to the value in `platform_cfg.h` integrates this with the three remaining boards listed above. The patch is successfully tested with the ASRock E350M1. $ lspci -nn | grep SATA 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) [1] http://review.coreboot.org/225 [2] http://review.coreboot.org/227 Change-Id: I227257e2c8f04f18c27ff00fe62d42e372de67e4 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2610 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-08AMD Persimmon: mainboard.c: Make comment generic to reduce differencePaul Menzel
Replace »persimmon« by »board« in comment to keep `diff` output between boards small. Change-Id: Ieae2a63782c488ae35f22eb30f5b1049200d12c8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2611 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-08AMD Union Station: Use SPD read code from F14 wrapperKimarie Hoot
Changes: - Get rid of the union_station mainboard specific code and use the platform generic function wrapper that was added in change http://review.coreboot.org/#/c/2497/ AMD f14: Add SPD read functions to wrapper code - Move DIMM addresses into devicetree.cb - Add the ASF init that used to be in the SPD read code into mainboard_enable() Notes: - The DIMM reads only happen in romstage, so the function is not available in ramstage. Point the read-SPD callback to a generic function in ramstage. Change-Id: I19d6b0d674b67294519383f80928471b37da1e14 Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-on: http://review.coreboot.org/2609 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-08AMD South Station: Use SPD read code from F14 wrapperKimarie Hoot
Changes: - Get rid of the south_station mainboard specific code and use the platform generic function wrapper that was added in change http://review.coreboot.org/#/c/2497/ AMD f14: Add SPD read functions to wrapper code - Move DIMM addresses into devicetree.cb - Add the ASF init that used to be in the SPD read code into mainboard_enable() Notes: - The DIMM reads only happen in romstage, so the function is not available in ramstage. Point the read-SPD callback to a generic function in ramstage. Change-Id: If4291d25ea81bf375f55b64c07c223a847a211d0 Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-on: http://review.coreboot.org/2608 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-08ARMV7 and Google/Snow: Add exception support code to the ramstageRonald G. Minnich
This is previously used exception code from libpayload. On startup it installs and then tests an exception handler. The test is an unaligned memory operation. Yes, we've seen what might be exceptions in the ramstage, and it makes sense to handle them. This code is identical in structure and operation to the previously committed payload exception handler, though we reserve the right to change it as circumstances require. The remaining question is whether we need it in romstage. Change-Id: I24484686c33c9757af8ba171ebae9773828fb69d Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2614 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-03-08Supermicro H8QGI: set up right frequency limits for memory controllerKonstantin Aladyshev
According to BKDG: "Memory controller (MCT) and DRAM controllers (DCTs) additions: • Support for 933 MHz (1866 MT/s) MEMCLK frequency." Change-Id: I6f307ce3fcb355d5445f1ea86def73a41b928a57 Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2589 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-08FrontRunner/Toucan-AF: lower SPI speed to 22 MHzJens Rottmann
The Hudson-E1's default SPI speed for normal i.e. non-fast reads is 66 MHz, but the SST 25VF032B datasheet allows max. 25. Lower the speed to 22 MHz, otherwise BIOS flashing fails. Change-Id: I22e87d833a3ebd316b6e873595a2480831533ab1 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2605 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-07AMD Persimmon: Use SPD read code from F14 wrapperMartin Roth
Changes: - Get rid of the persimmon mainboard specific code which has been moved into the wrapper as a platform generic function in change http://review.coreboot.org/#/c/2497/ AMD f14: Add SPD read functions to wrapper code - Move DIMM addresses into devicetree.cb - Add the ASF init that used to be in the SPD read code into mainboard_enable() Notes: - The DIMM reads only happen in romstage, so the function is not available in ramstage. Point the read-SPD callback to a generic function in ramstage. Change-Id: I5f017dbb8dee5a09ec19734a6069ff9b71a6ab50 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2500 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-07snow: add real values for GPIOs in fill_lb_gpios()David Hendricks
This adds some real GPIO mappings where virtual GPIOs were used before. Change-Id: I25d4be45f986c8d622b97151f8bdae2651baf3e6 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2603 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-07google/snow: fix coding styleStefan Reinauer
cosmetics Change-Id: Iea33768d901641861aa7b2c76af8753a848f584d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2601 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-03-07ASRock E350M1: Let `BiosGnbPcieSlotReset()` return `AGESA_UNSUPPORTED`Paul Menzel
Quoting Jens Rottmann [1]: Nevertheless I still think this whole function is bogus for the E350M1. The function assumes GPIO21 is wired to reset APU PCIe lane 0+1 (PCIe x8, port 4+5 as Coreboot/AGESA calls it), GPIO25 resets lane 2 (PCIe x4) and GPIO02 lane 3. But the E350M1 has PCIe x16 i.e. probably APU lanes 0-3 bundled, completely different layout. They could have chosen GPIO21 to force resets, or 25 - or maybe 50 like on the Persimmon or any other they fancied or - and this is the most probable - none at all. Having BiosGnbPcieSlotReset() toggle some GPIOs without knowing what they do on the E350M1 (if anything at all) is nonsense. In my opinion this whole function should just "return AGESA_UNSUPPORTED" and good riddance. [1] http://review.coreboot.org/#/c/2445/ Change-Id: Iac66da41182e838c7e6925250cc3982adbb3e4ec Reported-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2489 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
2013-03-06samsung/exynos5: add display port and framebuffer defines and initializationRonald G. Minnich
These are essential functions for setting up the display port and framebuffer, and also enable such things as aux channel communications. We do some very simple initialization in romstage, mainly set a GPIO so that the graphics is powering up, but the complex parts are done in the ramstage. This mirrors the way in which graphics is done in the x86 size. I've added a first pass at a real device, and put it in the mainboard Kconfig, hoping for corrections. Because startup is so complex, depending on device type, I've created a 'displayport' device that removes some of the complexity and makes the flow *much* clearer. You can actually follow the flow by looking at the code, which is not true on other implementations. Since display port is perhaps the main port used on these chips, that's a reasonable compromise. All parameters of importance are now in the device tree. Change-Id: I56400ec9016ecb8716ec5a5dae41fdfbfff4817a Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2570 Tested-by: build bot (Jenkins)
2013-03-06ASRock E350M1: mainboard.c: Add declarations for `set_pcie_{,de}reset`Paul Menzel
Since the merg of the ASRock E350M1 port (a649a96e) the compiler warns about the following [1]. mainboard.c:35, GNU Compiler 4 (gcc), Priorität: Normal no previous prototype for 'set_pcie_reset' [-Wmissing-prototypes] mainboard.c:43, GNU Compiler 4 (gcc), Priorität: Normal no previous prototype for 'set_pcie_dereset' [-Wmissing-prototypes] Adding the function prototypes to the beginning of the file as done in commit »Persimmon updates for AMD F14 rev C0« (d7a696d0) addresses the warning. [1] http://qa.coreboot.org/job/coreboot-gerrit/4975/warnings13Result/package.-139448264/file.-1544928473/ [2] http://review.coreboot.org/137 Change-Id: Iad2e62ec37c3a2f749a264974b61ac7c226e9b83 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2590 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-06Google/Snow: enable sound hardware clocksRonald G. Minnich
Set up the clocks used for sound and turn on the sound clock. Change-Id: Ic59bfa9ae87116299503e6d25aeefba98c842fb8 Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2587 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-03-06google/snow: Change MMC0 to work in 8 bit mode.Ronald G. Minnich
The MMC0 on google/snow can run in 8 bit mode. To simplify driver development, we thought disabling it (using zero, which runs in 1-bit / 4-bit mode) may help. However, after some experiments in payload drivers, setting pinmux to 8 bit mode can still allow MMC to run in 1-bit / 4-bit mode, so it's pretty safe to enable 8 bit mode by default for better performance. Verified to boot on google/snow, and got MMC0 working. Change-Id: Ic0acc723fe6a8aecf373429d3801beadd70815d9 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2585 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-03-04FrontRunner/Toucan-AF: drop unnecessary compile time CPU model selectionJens Rottmann
The first reason for selecting the CPU model at compile time was a multi-second pause if booting a single core Fusion T40R with MAX_CPUS=2. Recent tests show the pause has disappeared, someone must have fixed it. The second reason was me not knowing how to make a single vgabios image work with two different PCI IDs. Many thanks to Martin Roth for educating me! Quote: "The way to make coreboot use the same vbios for different video device IDs is through the map_oprom_vendev function. In family 14 it's in northbridge/amd/agesa/family14/amdfam14_conf.c You would name your video bios 1002,9802 in the config and all the other device/vendor IDs for the family 14h processors will fall through the initial check for the video bios and will get remapped to use that vbios. This only works if you're initializing the vbios inside coreboot. I don't know if you're using SeaBios as a payload, but if you are you can add the vbios to cbfs as vgaroms/vbios.rom and the rom will always be initialized." I'd like to add the vgabios is added as type 'optionrom' when Coreboot make adds it, however to work with SeaBios it has to be added manually with cbfstool and with type 'raw', or it will hang. Change-Id: I8190d0c3202a60dfccb77dde232f9ba7ce5ce318 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2584 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-03AMD Persimmon, LiPPERT Fam14: Fix typo code*c* in commentPaul Menzel
Commit f154c018 Author: Marc Jones <marcj303@gmail.com> Date: Wed Dec 14 11:24:00 2011 -0700 Persimmon audio codec verb patch. Reviewed-on: http://review.coreboot.org/490 has a typo code*c* in the comments for `AZALIA_OEM_VERB_TABLE`. As this was copied over to the LiPPERT Fam14 boards, use the following command to fix the typo. $ git grep -l cocec | xargs sed -i s,cocec,codec, Change-Id: I1525b0445edab81ab136b3adece52b78ba7abc71 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2576 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-02ASRock E350M1: Remove non-existing PCI devices 12.1 and 13.1Paul Menzel
Looking at the coreboot log […] PCI: 00:12.0 [1002/4397] enabled sb800_enable() PCI: Static device PCI: 00:12.1 not found, disabling it. sb800_enable() PCI: 00:12.2 [1002/4396] ops PCI: 00:12.2 [1002/4396] enabled sb800_enable() PCI: 00:13.0 [1002/4397] ops PCI: 00:13.0 [1002/4397] enabled sb800_enable() PCI: Static device PCI: 00:13.1 not found, disabling it. sb800_enable() PCI: 00:13.2 [1002/4396] ops PCI: 00:13.2 [1002/4396] enabled […] and the `lspci -tnvv` output running the proprietary vendor BIOS attached to the Wiki page of the ASRock E350M1 [1][2] -[0000:00]-+-00.0 1022:1510 +-01.0 1002:9802 +-01.1 1002:1314 +-04.0-[01]-- +-11.0 1002:4391 +-12.0 1002:4397 +-12.2 1002:4396 +-13.0 1002:4397 +-13.2 1002:4396 […] both PCI devices do not exist, so remove them from `devicetree.cb`. Commit 48918f7 [3] Persimmon, Inagua: PCI devs 12.1, 13.1 (USB) don't exist, but 14.6 (GEC) does did the same for AMD Inagua and AMD Persimmon. [1] http://www.coreboot.org/ASRock_E350M1 [2] http://www.coreboot.org/File:ASRock_E350M1_info_dump.tar.bz2 [3] http://review.coreboot.org/2463 Change-Id: Ief6de1bda093d1f29d5925985e5c3839cdded537 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2536 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-02FrontRunner/Toucan-AF: work around AGESA RAM init crashing on rebootJens Rottmann
If you try to reset the system with outb(3,0x92), outb(4,0xcf9) or a triple-fault it will instead crash with a messy screen. As the more common outb(0xFE, 0x64) doesn't work with our setup, Linux will crash whenever you ask it to reboot. Closer inspection shows that on a warm boot of Coreboot agesawrapper_amdinitpost() always fails with error code 7. Looks like DDR3 re-init goes wrong somehow. I tried find the reason for this but was unable to. I am convinced this is not board specific but a bug in AGESA. In the end I had to settle for a workaround: if amdinitpost returns 7 this patch resets the system harder with outb(0x06, 0x0cf9), after that RAM init will succeed. As amdinitpost is early in POST this automatic reset is quick enough not to be noticable. I'd perfer a real fix, but that's all I have. Change-Id: I4763254b489f42a135232e45328ecf0d5c4d961a Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2573 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-02LiPPERT Toucan-AF [2/2]: actually implement mainboard supportJens Rottmann
Step 2: change the Persimmon code to adapt it to the new board's hardware. The Toucan-AF is a COM Express Compact Type 6 form factor embedded board: - AMD Fusion G-T56N (1.65 GHz dual core) or T40R (1 GHz single core) APU - 1-4 GB DDR3 memory down - 1x VGA, 2x DisplayPort (1 switchable to LVDS) - AMD A55E (Hudson-E1) southbridge - 8x USB 2.0 - 4x SATA - HD Audio (with codec on baseboard) - NEC uPD78F0532 microcontroller on I2C ("SEMA") - 7x PCIe2.0 x1 (1 on PEG) - Intel I210 GbE (on APU PCIe x1, can be disabled for additional PCIe) - 2x SST 25VF032B (SO8, soldered) 4 MB SPI flash (BIOS and failsafe BIOS) The Toucan-AF has no SIO on board. This patch includes basic support for a Winbond W83627DHG (PS/2, 2x RS232), because the ADLINK ExpressBase-6 used for evaluation happens to have one. The code may have to be adapted to the actual baseboard of the application. http://www.adlinktech.com/PD/web/PD_detail.php?pid=1132 Change-Id: I9041b905bad45852ac9b402fcbd5decbc98b377b Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2572 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-02LiPPERT Toucan-AF [1/2]: create board by forking AMD PersimmonJens Rottmann
Step 1: copy all files unmodified from Persimmon. This makes it much easier later to see how the two boards actually and deliberately differ when porting bugfixes from one to the other. Git's copy detection is imperfect (and slow). Change-Id: I1ff02913479c07679f8c3ae5e6dd7876e6000b55 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2571 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-02LiPPERT FrontRunner-AF [2/2]: actually implement mainboard supportJens Rottmann
Step 2: change the Persimmon code to adapt it to the new board's hardware. The FrontRunner-AF is a PC/104+ form factor embedded board: - AMD Fusion G-T56N (1.65 GHz dual core) or T40R (1 GHz single core) APU - DDR3 SO-DIMM socket (1.5 or 1.35V) - VGA and LVDS (via Analogix ANX3110) - AMD A55E (Hudson-E1) southbridge - 6x USB 2.0 - 1x SATA, 1x CFast socket - HD Audio (via Realtek ALC886) - PCI and ISA (via ITE IT8888) - NEC uPD78F0532 microcontroller on I2C ("SEMA") - Intel I210 GbE (on APU PCIe x1) - SMSC SCH3112 SIO - PS/2 - 2x RS232/485 - 2x SST 25VF032B (SO8, soldered) 4 MB SPI flash (BIOS and failsafe BIOS) http://www.adlinktech.com/PD/web/PD_detail.php?pid=1131 Change-Id: Id55f89d224ad669b351c36128b12299802b721ba Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2553 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-02LiPPERT FrontRunner-AF [1/2]: create board by forking AMD PersimmonJens Rottmann
Step 1: copy all files unmodified from Persimmon. This makes it much easier later to see how the two boards actually and deliberately differ when porting bugfixes from one to the other. Git's copy detection is imperfect (and slow). Change-Id: I2fd1bf8428fc8a1e7becee888b6182b9bd8166a0 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2552 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-03-01armv7/snow: Add S5P MSHC initialization in ROM stage.Hung-Te Lin
The SD/MMC interface on Exynos 5250 must be first configured with, GPIO, and pinmux settings before it can be detected and used in ramstage / payload. Verified on armv7/snow and successfully boot into ramstage. Change-Id: I26669eaaa212ab51ca72e8b7712970639a24e5c5 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2561 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-28CBMEM: always initialize early if the board supports itStefan Reinauer
This allows to drop some special cases in romstage.c Change-Id: I53fdfcd1bb6ec21a5280afa07a40e3f0cba11c5d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2551 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-28Drop SRC_ROOT from mainboard Makefile.incsStefan Reinauer
It's not used, and not needed. Change-Id: Ifca92f3606ac58fc26e09676488c3add5d84ae79 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2548 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-28Drop CONFIG_WRITE_HIGH_TABLESStefan Reinauer
It's been on for all boards per default since several years now and the old code path probably doesn't even work anymore. Let's just have one consistent way of doing things. Change-Id: I58da7fe9b89a648d9a7165d37e0e35c88c06ac7e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2547 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-27Google/snow: update the GPIO emulation.Ronald G. Minnich
Add two more GPIOs (total 6) as needed by the Google Snow laptop. These are faking out settings for now. This code is tested and working. Change-Id: I2077ffb8b85958eefdf54e19763d57cc1178ce89 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2538 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2013-02-27Persimmon: remove HDMI Audio, PCI device 00:01.1 from devicetree.cbJens Rottmann
Commit 8487229b (Persimmon doesn't have HDMI so the GNB HD Audio should be disabled.) turned off the device in AGESA. Now remove it from devicetree.cb, too. This prevents the following boot message: PCI: Left over static devices: PCI: 00:01.1 PCI: Check your devicetree.cb. Also clarify the line's comment a bit for the Fam14 boards which still retain this device (to counter the loss of information ;-). Change-Id: Ib671ed2e0d04bdef2869e8d70208d6e55cdea3fd Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2537 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-27Mainboard SMI S state handler was using the wrong definesMarc Jones
The PCH register bit definition for sleep type is a little confusing. For example, 7 is S5. To make this simpler for the mainbaord developer, the mainboard smi sleep hander is called as mainboard_sleep(slp_typ-2). A couple mainboard SMI handlers were using the PCH define for slp_ty, so S3 code would be run for S5 and S5 code would never be run. Change-Id: Iaecf96bfd48cf00153600cd119760364fbdfc29e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/2514 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-26AMD Inagua: buildOpts.c: Adapt whitespace to coding stylePaul Menzel
Mainly replace spaces by tabs and format comments correctly. Commit »Inagua: Indent and wihtespace cleanup« (f03360f3) [1] was unfortunately incomplete and also used spaces instead of tabs in some cases. Hopefully fix this once and for all to have a template for the other boards. [1] http://review.coreboot.org/547 Change-Id: If15c797581dfefe2a57cd6f26e5bdac4cdd014dd Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2526 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-26AMD Fam14 boards: reduce unnecessary differences, 2nd attemptJens Rottmann
This patch reduces unnecessary differences between AMD Inagua, Persimmon, Union Station, South Station and Asrock E350M1. It's only cosmetical, but makes them a little bit easier to compare. This is the remainder of the original http://review.coreboot.org/2464, parts of which somehow got lost in a flurry of refactoring and splitting patches. Change-Id: I034228be9edaaa4122506763d7bb4158f8e0ec53 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2529 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-25Supermicro H8SCM & H8QGI: Fix printk warningsMartin Roth
Changes: - Fix printk warnings for these two platforms by getting rid of the l length specifier and casting to unsigned int. This gets rid of a bunch of warnings like this one: agesawrapper.c:279, GNU Compiler 4 (gcc), Priority: Normal format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'UINT32' [-Wformat] Notes: - This is the same change that was done for Tyan s8226 in change: ddff32eb - http://review.coreboot.org/#/c/2451/ Tyan S8226: Fix printk warnings - I have not tested this change on either of these platforms, I have just compiled it. Change-Id: I46b4c13fde7473cd2a084c7c7cb5c893f1731b02 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2502 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25AMD Southstation: Fix final warningMartin Roth
Changes: - Add #include of delay.h in mainboard.c to pick up declaration of mdelay function. Notes: - This fixes this warning: mainboard.c:69, GNU Compiler 4 (gcc), Priority: Normal implicit declaration of function 'mdelay' [-Wimplicit-function-declaration] Change-Id: I72f333cd87215a7fc1e62d1d7ee4b2395444b03e Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2501 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25AMD Fam14 boards: Set P_BLK length to 6 for all processorsPaul Menzel
Currently on for example on AMD Persimmon and ASRock E350M1 Linux complains, that the PBLK length is invalid [1]. ACPI: Invalid PBLK length [0] Consequently, frequency scaling might not work correctly, though for these two boards it seems to work according to PowerTOP. Indeed, according to the ACPI specification [2], setting PBlockLength to 0 is only allowed if there is no PBlockAddress. Otherwise it has to be set to 6. 18.5.93 Processor (Declare Processor) […] PBlockAddress provides the system I/O address for the processors register block. Each processor can supply a different such address. PBlockLength is the length of the processor register block, in bytes and is either 0 (for no P_BLK) or 6. With one exception, all processors are required to have the same PBlockLength. The exception is that the boot processor can have a non-zero PBlockLength when all other processors have a zero PBlockLength. It is valid for every processor to have a PBlockLength of 0. And that is exactly what Linux is checking in `drivers/acpi/processor_driver.c` [3]. static int acpi_processor_get_info(struct acpi_device *device) { […] /* * On some boxes several processors use the same processor bus id. * But they are located in different scope. For example: * \_SB.SCK0.CPU0 * \_SB.SCK1.CPU0 * Rename the processor device bus id. And the new bus id will be * generated as the following format: * CPU+CPU ID. */ sprintf(acpi_device_bid(device), "CPU%X", pr->id); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, pr->acpi_id)); if (!object.processor.pblk_address) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n")); else if (object.processor.pblk_length != 6) printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n", object.processor.pblk_length); else { pr->throttling.address = object.processor.pblk_address; pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset; pr->throttling.duty_width = acpi_gbl_FADT.duty_width; pr->pblk = object.processor.pblk_address; /* * We don't care about error returns - we just try to mark * these reserved so that nobody else is confused into thinking * that this region might be unused.. * * (In particular, allocating the IO range for Cardbus) */ request_region(pr->throttling.address, 6, "ACPI CPU throttle"); } […] } This issue has proliferated to all AMD based boards so fix it for all of them by setting P_BLK length to 6. The DSDT of for example AMD Parmer and AMD Thatcher also set it to 6 everywhere so this solution is taken instead of setting the P_BLK system I/O base to 0 for all but the first processor which is how it is done for earlier AMD based boards. As note having to set this manually should not be needed and this should be autogenerated as done for most of the Intel boards and the AMD K8 based boards (`src/cpu/amd/model_fxx/powernow_acpi.c`). [1] http://www.coreboot.org/pipermail/coreboot/2013-January/073636.html [2] http://acpi.info/DOWNLOADS/ACPIspec40a.pdf [3] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=blob;f=drivers/acpi/processor_driver.c;h=e83311bf1ebdaaaea1adbf2de1351cca907d3465;hb=5da1f88b8b727dc3a66c52d4513e871be6d43d19#l351 Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> • ASRock E350M1: Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> • AMD Persimmon: Tested-by: Martin Roth <martin.roth@se-eng.com> Change-Id: Ie79fe4812532d124cc81747c75a4f3d88d00531c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2189 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-02-25Persimmon, Inagua: PCI devs 12.1, 13.1 (USB) don't exist, but 14.6 (GEC) doesJens Rottmann
USB ports 0-4 are handled by PCI devices 12.0 (OHCI) and 12.2 (EHCI). 12.1 simply does not exist, so remove it from devicetree.cb. While at it make the comment more detailed. Likewise for all USB ports. USB device 14.6 is the Broadcom GbE MAC integrated in the Hudson-E1. Add it to devicetree.cb. It's used on Inagua (on), but not on Persimmon (off). Change-Id: Idea27b3390fa4470f2592e79fdd633d5a218b97b Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2463 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2013-02-25AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID fieldPaul Menzel
The DSDT header contains the fields OEMID and OEM Table ID. See for example ACPI specification 4.0a [1] 5.2.11.1 Differentiated System Description Table (DSDT) on page 135. There Table 5-16 contains the descriptions. Field Byte Length Byte Offset Description =================================================== OEMID 6 10 OEM ID OEM Table ID 8 16 The manufacture model ID. Currently in coreboot there is no common method what to put in these fields. Mostly Intel based boards populate it with "CORE " ore "COREv4" and AMD based boards populate it with the board vendor and model number, abbreviated appropriately to fit into these fields. On most boards the proprietary vendor BIOS seems to leave these fields – displayed with `sudo dmidecode` under System Information – blank To Be Filled By O.E.M. and fill out the Base Board Information with the board vendor and model name. In [2] Jens Rottmann argues that the this is really just the table ID used for naming it and that »99% of the DSDT code is not board specific«. Both approaches seem to have their advantages, but using the second one, developers often seem to forget to update them (for example AMD Thather). The current situation is at least not optimal. and therefore at least unify the string in the OEM Table ID. If unifying the OEM ID is also a good idea this should be done too. If later on it should be decided that the board vendor and model should be used again, this should be somehow derived from Kconfig. The following command was used for the change [3]. $ git grep -l '\/\* TABLE ID \*\/' | xargs sed -i '/TABLE ID/s/"\([^"]*\)"/"COREBOOT"/' This patch is split out from [2]. [1] http://www.acpi.info/spec40a.htm [2] http://review.coreboot.org/#/c/2464/ [3] http://stackoverflow.com/questions/5207838/sed-regex-matching-text-between-to-double-quotes-when-a-certain-text-appears-i Change-Id: Iec98c615ce37f928abc1b500eff5aa865d772cb2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2472 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25google/snow: enable GPIO entries and CHROMEOS in buildingRonald G. Minnich
These were not separable or it would have been two CLs. Enable CHROMEOS configure option on snow. Write gpio support code for the mainboard. Right now the GPIO just returns hard-wired values for "virtual" GPIOs. Add a chromeos.c file for snow, needed to build. This is tested and creates gpio table entries that our hardware can use. Lots still missing but we can now start to fill in the blanks, since we have enabled CHROMEOS for this board. We are getting further into the process of actually booting a real kernel. Change-Id: I5fdc68b0b76f9b2172271e991e11bef16f5adb27 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2467 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25QEMU x86: northbridge.c: Name enabling device function to `northbridge_enable`Paul Menzel
Similar to the discussion on the coreboot list [1] Am Freitag, den 22.02.2013, 02:17 +0100 schrieb Peter Stuge: […] > Function names should try to be descriptive. "enable_dev" is not very > descriptive. I like "mainboard_enable" because it makes output such > as > > printk("%s: foo", __func__); > > useful. rename the function for the northbridge to `northbridge_enable`. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074549.html Change-Id: I262311ec511e394550330214621b8c37780c1d4e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2496 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25Persimmon: Fix warning, enable warnings as errorsMartin Roth
- Fix redefinition warning for SB_GPIO_REG50 introduced in commit fa8702cf - http://review.coreboot.org/#/c/2446/ Persimmon: adapt PCIe reset code copied from Inagua to actually match Persimmon The warning being fixed is: SB800.h:1491, GNU Compiler 4 (gcc), Priority: Normal "SB_GPIO_REG50" redefined [enabled by default] - Enable warnings as errors so no more warnings will be accidentally committed. Change-Id: Ib443b2bd2067f0b7d5f93f79170899a0f8f61060 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2494 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25Technologic TS5300: mainboard.c: Move { to next linePaul Menzel
This is coreboot’s coding style. Change-Id: I7441f2c1927a49a3b7171112b7798dae6b56cfb5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2492 Reviewed-by: Martin Roth <martin.roth@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Bernhard Urban <lewurm@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-24Siemens SITEMP G1P1: mainboard.c: Rename `init` to `mainboard_init`Paul Menzel
This is the common way to name that function, so unify that. Change-Id: I8a01051bd304039662894b89eed53ce14dde98b6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2491 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-23Add support for Google's Chromebook PixelStefan Reinauer
Ladies and gentlemen, I'm very happy to announce coreboot support for the latest and greatest Google Chromebook: The Chromebook Pixel. See the link below for more information on the Chromebook Pixel, and its exciting specs: http://www.google.com/intl/en/chrome/devices/chromebooks.html#pixel The device is running coreboot and open source firmware on the EC (see ChromeEC commit for more information on that exciting topic) Change-Id: I03d00cf391bbb1a32f330793fe9058493e088571 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2482 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-23AMD based boards: platform_cfg.h: Replace `_*BOARDNAME*_CFG_H_` with ↵Jens Rottmann
`_PLATFORM_CFG_H_` Reduce unnecessary differences between AMD based boards only using the file `platform_cfg.h` for configuration making them a little bit easier to compare. Inagua & co. mention the board name in several places which are really not that board specific. Sometimes people even forget to change it: Union Station’s platform_cfg.h starts with "#ifndef _PERSIMMON_CFG_H_". Funny. Change that to "_PLATFORM_CFG_H_" everywhere. The following command was used. $ find . -name platform_cfg.h | xargs sed -i '/_CFG_H_/s/_.*_/_PLATFORM_CFG_H_/' More boards seem to use that kind of naming (`git grep _CFG_H_`) but it is not certain that this will not break anything as for example the board AMD Dinar also has header files for configuration stuff for the north- and southbridge. $ git grep _CFG_H_ […] src/mainboard/amd/dinar/platform_cfg.h:#ifndef _PLATFORM_CFG_H_ src/mainboard/amd/dinar/platform_cfg.h:#define _PLATFORM_CFG_H_ src/mainboard/amd/dinar/platform_cfg.h:#endif //_PLATFORM_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#ifndef _RD890_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#define _RD890_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#endif //_RD890_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#ifndef _SB700_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#define _SB700_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#endif //_SB700_CFG_H […] Change-Id: Ida15fa6a7adfc770240ac30e795946000dae3f16 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2464 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-02-22*/acpi_tables.c: Use ALIGN macroPatrick Georgi
At the request of Paul Menzel, I reran an old classic of a coccinelle script: @@ expression E; @@ -(E + 7) & -8 +ALIGN(E, 8) @@ expression E; @@ -(E + 15) & -16 +ALIGN(E, 16) Change-Id: I01da31b241585e361380f75aacf3deddb13d11c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2487 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-21AMD Fam14 boards: Unify `acpi_table.c` by mainly using Inagua’s onePaul Menzel
There were just whitespace differences and three boards did not contain printk(BIOS_DEBUG, "alib\n"); dump_mem(ssdt, ((void *)alib) + alib->length); which is enclosed `#if DUMP_ACPI_TABLES == 1` to dump the ACPI tables. Basically the whitespace in the license header in Inagua’s file was fixed and then the file copied over to the other directories. Change-Id: I23f73acad427b5ec14cf51651af67240871f7488 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2470 Tested-by: build bot (Jenkins) Reviewed-by: Alvaro G. <andor@pierdelacabeza.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21AMD boards: Fix typo `@brief` in commentPaul Menzel
The following command was used to correct the typo. $ git grep -l @breif | xargs sed -i 's/@breif/@brief/' Change-Id: If0b579279de3c41571b9cda643836f5748a752a2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2473 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21Persimmon: platform_cfg.h: Declare codec arrays as `static const`Jens Rottmann
From ISO C99 standard: »The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature.« Found at <http://www.approxion.com/?p=41>. Change-Id: Iee7878affb2a5d157a94763083689d75e8218b2f Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2474 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21Persimmon: dimmSpd.c: Use spaces for alignment of if-predicatePaul Menzel
The relational operators in the if-predicate are aligned in all `dimmSpd.c` files so revert part of the change in commit 36abff1dc8e74beafa47ad83de17416681970916 Author: Marc Jones <marcj303@gmail.com> Date: Mon Nov 7 23:26:14 2011 -0700 Cleanup Persimmon mainboard whitespace. Reviewed-on: http://review.coreboot.org/427 to remove the incorrectly introduced tabs and to unify that. It might contradict the current coding style but it is even used in the latest code as seen in the following file. src/northbridge/amd/agesa/family15tn/dimmSpd.c Change-Id: Ib611267f99090d0830bdc2319527389f193ea1eb Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2471 Reviewed-by: Alvaro G. <andor@pierdelacabeza.com> Tested-by: build bot (Jenkins)
2013-02-21Persimmon: Indent commentPaul Menzel
This was overlooked in the following commit. commit 36abff1dc8e74beafa47ad83de17416681970916 Author: Marc Jones <marcj303@gmail.com> Date: Mon Nov 7 23:26:14 2011 -0700 Cleanup Persimmon mainboard whitespace. Reviewed-on: http://review.coreboot.org/427 Change-Id: If6bf4836b46077614a04c1e106c241a4f97da166 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2468 Tested-by: build bot (Jenkins) Reviewed-by: Alvaro G. <andor@pierdelacabeza.com>
2013-02-21AMD Fam14 boards: dimmSpd.c: Set `iobase` to `SMBUS0_BASE_ADDRESS` instead ↵Jens Rottmann
of `0xB00` For AMD Inagua, the following two commits commit 01f7ab93359ae0fee5784d35effbcbe0b596df18 Author: Kerry Sheh <shekairui@gmail.com> Date: Thu Jan 19 13:18:36 2012 +0800 Inagua: Synchronize AMD/inagua mainboard. Reviewed-on: http://review.coreboot.org/542 and commit d91c9b7e3cb9fdaeb9399a21907996130f3120bb Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 10:59:55 2011 -0600 AMD Inagua platform updates Reviewed-on: http://review.coreboot.org/136 replaced the constant `iobase` is set to by the define `SMBUS0_BASE_ADDRESS` from `OEM.h`. Do the same for AMD Persimmon, South Station, Union station and ASRock E350M1. Change-Id: If095cd9d9b28b118b4072c7c9d345bf620b774c9 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2453 Tested-by: build bot (Jenkins)
2013-02-21ARMV7: create a correct LB_SERIAL table entryRonald G. Minnich
If CONFIG_CONSOLE_SERIAL is set, and we can call the standard function and get a non-zero uart address, then we create an lb table entry. The code was mostly right, just needed a tweak. Change-Id: I5b36c7b4e580a23319b7ba92cc8ad61592b1757a Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2466 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-20Whitespace: Replace tab character in license text with two spacesPaul Menzel
For whatever reason tabs got inserted in the license header text. Remove one occurrence of that with the following command [1]. $ git grep -l 'MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.'$'\t' | xargs sed -i 's,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.[ ]*,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\ \ ,' [1] http://sed.sourceforge.net/grabbag/tutorials/sedfaq.txt Change-Id: Iaf4ed32c32600c3b23c08f8754815b959b304882 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2460 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2013-02-20Persimmon: Replace tab with space in address in license headerPaul Menzel
The following commit was too eager replacing spaces with tabs. commit 36abff1dc8e74beafa47ad83de17416681970916 Author: Marc Jones <marcj303@gmail.com> Date: Mon Nov 7 23:26:14 2011 -0700 Cleanup Persimmon mainboard whitespace. Reviewed-on: http://review.coreboot.org/427 Fix that with the following command. $ git grep -l 'Floor, Boston, MA'$'\t''02110-1301 USA' | xargs sed -i 's/Boston, MA[ ]*02110-1301 USA/Boston, MA 02110-1301 USA/' Change-Id: Ia118a8c19d94ce1f1048280a0f1d49d447cfa2a7 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2461 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2013-02-19Tyan S8226: Fix incompatible pointer warningMartin Roth
Fix warning: mptable.c:52, GNU Compiler 4 (gcc), Priority: Normal passing argument 3 of 'mptable_write_buses' from incompatible pointer type [enabled by default] mptable_write_buses is expecting a pointer to an int, so I changed the U8 isa_bus to an int to match. A U8 doesn't make sense if the value could be greater than 255 - certainly unlikely, but possible since the value of isa_bus gets set to the maximum PCI bus number + 1. Change-Id: I7ea416f48285922d6cf341382109993fd3f6405c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2450 Tested-by: build bot (Jenkins) Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-19Tyan S8226: Fix integer truncated warningMartin Roth
Fix Warning: sb700_cfg.c:129, GNU Compiler 4 (gcc), Priority: Normal large integer implicitly truncated to unsigned type [-Woverflow] The issue here was that an 8 bit value was being placed into a 2-bit bitfield. $ more src/vendorcode/amd/cimx/sb700/SBTYPE.h […] UINT32 AzaliaSdin0 :2; //6 UINT32 AzaliaSdin1 :2; //8 UINT32 AzaliaSdin2 :2; //10 UINT32 AzaliaSdin3 :2; //12 $ more src/mainboard/tyan/s8226/sb700_cfg.h […] * SDIN0 is define at BIT0 & BIT1 * 00 - GPIO PIN * 01 - Reserved * 10 - As a Azalia SDIN pin * SDIN1 is define at BIT2 & BIT3 * SDIN2 is define at BIT4 & BIT5 * SDIN3 is define at BIT6 & BIT7 */ #ifndef AZALIA_SDIN_PIN #define AZALIA_SDIN_PIN 0x2A #endif […] $ more src/mainboard/tyan/s8226/sb700_cfg.c […] sb_config->AzaliaSdin0 = AZALIA_SDIN_PIN; […] The 8 bit value 0x2A (binary 00 10 10 10), was being used incorrectly – I believe the original intent of this value was to enable the SDIN pins 0, 1, & 2. Because it was getting truncated as it was put into AzaliaSdin0, this wasn't happening and only SDIN0 was being enabled. I am leaving only SDIN0 enabled at this point to as not change the actual behavior on the platform. Change-Id: Icaeb956926309dbfb5af25a36ccb842877e17a34 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2452 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-19Tyan S8226: Fix printk warningsMartin Roth
Fix 84 warnings all like this one: agesawrapper.c:289, GNU Compiler 4 (gcc), Priority: Normal format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'UINT32' [-Wformat] Fixed by getting rid of the l length specifier and casting to unsigned int. Change-Id: Ic143c1034f760fa5efb2220aa33861e399ddd708 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2451 Tested-by: build bot (Jenkins) Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2013-02-19Inagua+children: fix simple copy & paste error in code to reset PCIe slotsJens Rottmann
Looking at AssertSlotReset, the comments and all other case's it's obvious this is a simple copy & paste error where someone just forgot to change one occurrance of the GPIO nr. Also the AMD Inagua schematics show that GPIO02 is what they really meant. Also forward the fix to boards copied from Inagua (AMD South Station, Union Station, Asrock E350M1). Change-Id: I6b9a3d473245fa27604b2f148a730290277a88ed Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2445 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-19snow: add cpu_cluster and domain resources via devicetree.cbDavid Hendricks
This patch will cause the resource allocator to actually set aside the memory resources using methods in the previous patch. The coreboot table output will include "RAM" entries (there were none before): coreboot memory table: 0. 0000000040400000-00000000bff001ff: RAM 1. 00000000bff00200-00000000bff00fff: CONFIGURATION TABLES 2. 00000000bff01000-00000000bfffffff: RAM Change-Id: I5cd76e93fc232fdae1754253efb4e9269b3a20c0 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2420 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-18Persimmon: drop useless DDR3 voltage code copied from InaguaJens Rottmann
Inagua can use GPIOs 178,179 to switch VMEM to 1.5, 1.35 or 1.25 V, which it does according to data read from the SO-DIMM's SPD EEPROM. On Persimmon (according to DB-FT1 rev. D schematics) both GPIOs are unconnected, there is no way to change the 1.5 V DDR3 voltage (save unsoldering a resistor). The whole code copied over from Inagua is useless. Removed the code, instead a comment hints at Inagua, for people who do designs based on Persimmon but do have a way to change VMEM. The line ...->DDR3Voltage = VOLT1_5; is supposed to make the AGESA DDR3 code select the RAM timings for the actually supplied voltage instead of the hoped-for but unavailable lower voltage. I have no idea how to test this, but in any case it can't hurt. Change-Id: Id098e09418b665645814a6ee2d41a3bff72238ba Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2448 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-18Persimmon: disable APU PCIe port 3Jens Rottmann
According to DB-FT1 rev. D schematics the APU PCIe lane 3 is unconnected. Reflect this fact in the mainboard code. Change-Id: Ic98f4a63ef971628df7fbf97f56b80ebe7cb8517 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2447 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-18Persimmon: adapt PCIe reset code copied from Inagua to actually match PersimmonJens Rottmann
Comparing Persimmon and Inagua schematics and Coreboot code show the PCIe reset code has been blindly copied even though it doesn't suit the Persimmon at all. The Inagua can employ GPIOs 21, 25, 02 to manually reset devices on APU PCIe lanes 0/1, 2, 3 respectively. (Appearently the motivation for this is to revive buggy PCIe gen1 devices which got confused by PCIe gen2 signal training.) However the Persimmon not only doesn't support this, it even needs these 3 pins for the PCI interface! Instead it uses GPIO50 to reset devices on lanes 0-2 all at once. Lane 3 is unconnected anyway. This patch adapts the Persimmon mainboard code according to the DB-FT1 rev. D schematics. Change-Id: I05a657d9bf8cc59acc4f5174eb20375165c860c7 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2446 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-15OT200: add CMOS supportChristian Gmeiner
nvramtool works as expected. root@CHGM-DEV-OT200:~# /home/vis/nvramtool -a baud_rate = 19200 debug_level = Emergency Change-Id: Ia25dc5b4f0ed3a2dd7cc67b7d3174db3a6eff70e Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/2382 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-02-14Chromebooks: mainboard.c: Do not spell Chromebook in CamelCasePaul Menzel
»Chromebook« is the official spelling [1]. So correct that with the following command. $ git grep -l ChromeBook | xargs sed -i s,ChromeBook,Chromebook, The incorrect spelling was only used for the chip name. [1] http://www.google.com/intl/en/chrome/devices/hp-pavilion-chromebook.html#hp-pav Change-Id: I9c19f399a3e3d36bd644ec375822daa384a14961 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2370 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-14Google Butterfly: thermal.h: Align macro contentPaul Menzel
Change-Id: I3729f9bf66fcd72fa8870bb56a9c253a7368c774 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2371 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14snow: Set up MMU after DRAM is workingDavid Hendricks
This was omitted earlier while we were debugging DRAM code (0a5bc7f). It was likely broken due to inconsistent units earlier on. Now that things are cleaned up and working, let's add it back in. Change-Id: I2f356355c98b2896e2371fa63b9c9f20ae76d634 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2379 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14snow: remove superfluous printk's from romstage mainDavid Hendricks
These were left over from earlier debugging and are no longer needed. They don't indicate any status or useful info (other than which line of code has been executed). Error messages are available in case something needs attention. Change-Id: Ie09fac29c42908cb8924169e56d8927fb76f02da Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2386 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-12Google Butterfly: acpi/thermal.asl: Fix typo »The*re* is no …«Paul Menzel
The commit introducing support for the Google Butterfly Chromebook commit d7bd4eb003f5b6a13943418ae0ac53248a2e34d2 Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon Feb 11 11:11:36 2013 -0800 Add support for "Butterfly" Chromebook Reviewed-on: http://review.coreboot.org/2359 contains the typo, which is corrected now. Change-Id: I932f4cd248cac71c3ede39a7da97162e791827cb Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2373 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-12Google Butterfly: gpio.h: Correct whitespace errorsPaul Menzel
Correct some whitespace inconsistencies introduced in the following commit. commit d7bd4eb003f5b6a13943418ae0ac53248a2e34d2 Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon Feb 11 11:11:36 2013 -0800 Add support for "Butterfly" Chromebook Reviewed-on: http://review.coreboot.org/2359 Change-Id: Ifeda7eb29ddf855cdfea41ddbd685441ede55756 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2374 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-12Google Parrot/Butterfly: fadt.c: Align macros correctlyPaul Menzel
The commits adding support for the Google Parrot Chromebook commit a7198b34ccf120df2a9e5b9f104812e96916ad08 Author: Stefan Reinauer <reinauer@chromium.org> Date: Tue Dec 11 16:00:47 2012 -0800 Add support for Google Parrot Chromebook Reviewed-on: http://review.coreboot.org/2026 and the Google Butterfly Chromebook commit d7bd4eb003f5b6a13943418ae0ac53248a2e34d2 Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon Feb 11 11:11:36 2013 -0800 Add support for "Butterfly" Chromebook Reviewed-on: http://review.coreboot.org/2359 had macros in `fadt.c` which were not aligned correctly and did not adhere to the coding style which uses just one space after `#define`. Fix this and use tabs instead of spaces everywhere. Change-Id: I1422c57a3bdc2faa29d2a6e2064e4d3aeed0f1cb Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2375 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-12armv7: Add emulation/qemu-armv7 board.Hung-Te Lin
To simplify testing ARM implementation, we need a QEMU configuration for ARM. The qemu-armv7 provides serial output, CBFS simulation, and full boot path (bootblock, romstage, ramstage) to verify the boot loader functionality. To run with QEMU: export QEMU_AUDIO_DRV=none qemu-system-arm -M vexpress-a9 -m 1024M -nographic -kernel build/coreboot.rom Verified to boot until ramstage loaded successfully by QEMU v1.0.50. Change-Id: I1f23ffaf408199811a0756236821c7e0f2a85004 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2354 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-11Add support for "Butterfly" ChromebookStefan Reinauer
We're happy to announce coreboot support for the "Butterfly" Chromebook, a.k.a HP Pavilion Chromebook. More information at: http://www.google.com/intl/en/chrome/devices/hp-pavilion-chromebook.html This commit also includes support for the ENE KB3940Q embedded controller running on Quanta's firmware. Change-Id: I194f847a94005218ec04eeba091c3257ac459510 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2359 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2013-02-11snow: fix high_tables_base calculationDavid Hendricks
It was off by a few orders of magnitude. D'oh. Change-Id: I9c8a3d5bd9ce261f914cfc7d05d86a1c61519b81 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2355 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-11AMD/Persimmon: Enable the 2nd COM portDave Frodin
The hardware is there, so turn it on. Change-Id: I40aff1e84a22a05599c62b9f0b20397df0a40b15 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2353 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-11Supermicro H8QGI: Substract 1 from MMCONF range limitKonstantin Aladyshev
MMCONF space is defined by two config parameters: MMCONF_BASE_ADDRESS (0xF800 0000) MMCONF_BUS_NUMBER (64) Coreboot allocates 1MB per bus, so MMCONF limit should be: 0xF800 0000 + 64*(0x0010 0000) - 1 = 0xFBFF FFFF Current code does not have (-1) component, this makes MMCONF limit equal 0xFC00 FFFF. Not 0xFC00 0000, because according to BKDG lower two bytes of MMIO limit always equal 0xFFFF: MMIOLimit = {MMIOLimitRegister[47:16], FFFFh}. Add (-1) to correct this issue. No functionality change has been experienced. The five times slower RAM speed compared to the proprietary vendor BIOS still remains. Change-Id: I2c6494c28bb8d36e54ceb2aa7d8d965b0103cbe9 Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2193 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-11armv7/exynos5250/snow: deprecate CONFIG_{RAMBASE,RAMTOP}David Hendricks
RAMBASE and RAMTOP are leftovers from the x86 port and do not apply the same way on ARM platforms. On x86 they refer to the low memory region where coreboot tables reside. However on ARM we don't have such a region which is architecturally defined. So instead we'll use the CPU-defined DRAM base address and the mainboard-defined DRAM size. This also has the pleasant side-effect of fixing the coreboot tables to not clobber ramstage code... Change-Id: I5548ecf05e82f9d9ecec8548fabdd99cc1e39c3b Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2351 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-10exynos/snow: move SPI GPIO setup to mainboard bootblock codeDavid Hendricks
This moves GPIO setup from chip-specific SPI code to mainboard- specific bootblock code. This makes exynos_spi_open a bit more generic so it can eventually be used for any SPI channel. This also benefits CBFS since the user can set media->context to to any set of SPI registers. Change-Id: I2bcb9de370df0a79353c14b4d021b471ddebfacd Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2347 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-10exynos/snow: set SPI clock rate in romstage mainDavid Hendricks
This moves the setting of SPI clock rate into romstage's main, which allows us to eliminate a bunch of dependencies from the bootblock (about 7KB worth). Change-Id: I371499bb4af6a6aa838294bc56f9dbc21864957a Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2346 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-09romcc: Use default romcc flags for most boardsPatrick Georgi
Except for one board, the flags can be derived from CONFIG_MMX and CONFIG_SSE. Change-Id: I64a11135ee7ce8676f3422b2377069a3fa78e24d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2336 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-09snow: do something useful in ramstage()David Hendricks
This cleans up Snow's trivial ramstage, gives it a coreboot table address and calls hardwaremain(). Change-Id: I84c904bcfd57a5f9eb3969de8a496f01e43bc2f6 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2328 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-08armv7/snow: Move clock initialization from bootblock to romstage.Hung-Te Lin
Exynos system clock can be initialized before RAM init, not necessary to be in the very beginning (boot block). This helps reducing bootblock dependency. Verified to boot on armv7/snow. Note: this patch was originally introduced in 2308, but there were some ordering issues so it was reverted. Change-Id: Ibc91c0e26ea8881751fc088754f5c6161d011b68 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2320 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-08armv7: Use same console initialization procedure for all ARM stagesHung-Te Lin
Use same console initialization procedure for all ARM stages (bootblock, romstage, and ramstage): #include <console/console.h> ... console_init() ... printk(level, format, ...) Verified to boot on armv7/snow with console messages in all stages. Change-Id: Idd689219035e67450ea133838a2ca02f8d74557e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2301 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-08console: Revise serial console configuration names.Hung-Te Lin
The console drivers (especially serial drivers) in Kconfig were named in different styles. This change will rename configuration names to a better naming style. - EARLY_CONSOLE: Enable output in pre-ram stage. (Renamed from EARLY_SERIAL_CONSOLE because it also supports non-serial) - CONSOLE_SERIAL: Enable serial output console, from one of the serial drivers. (Renamed from SERIAL_CONSOLE because other non-serial drivers are named as CONSOLE_XXX like CONSOLE_CBMEM) - CONSOLE_SERIAL_UART: Device-specific UART driver. (Renamed from CONSOLE_SERIAL_NONSTANDARD_MEM because it may be not memory-mapped) - HAVE_UART_SPECIAL: A dependency for CONSOLE_SERIAL_UART. Verified to boot on x86/qemu and armv7/snow, and still seeing console messages in romstage for both platforms. Change-Id: I4bea3c8fea05bbb7d78df6bc22f82414ac66f973 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2299 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-08Revert "armv7/snow: Move clock initialization from bootblock to romstage."David Hendricks
This reverts commit 9029f4b63f6d0e29bf1608e666cdb025de45ca24 This patch needs to go at the end of the UART patch set. Sorry 'bout the confusion! Change-Id: I5702c7d6130daf95776f2c15d24e5d253691cefd Reviewed-on: http://review.coreboot.org/2319 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-07armv7/snow: Move clock initialization from bootblock to romstage.Hung-Te Lin
Exynos system clock can be initialized before RAM init, not necessary to be in the very beginning (boot block). This helps reducing bootblock dependency. Verified to boot on armv7/snow. Change-Id: Ic863e222871a157ba4279a673775b1e18c6eac0d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2308 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-07armv7/snow: Remove power_init from bootblock.Hung-Te Lin
The power_init is not required on Exynos 5250 (snow) in bootblock stage. To get a cleaner and faster bootblock, we can remove it. Note, power_init internally calls max77686 and s3c24x0_i2c, so both files are also removed. Verified to boot on armv7/snow. Change-Id: I5b15dfe5ac7bf4650565fea0afefc94a228ece29 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2317 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-07armv7/snow: Remove redundant I2C initialization calls in bootblock.Hung-Te Lin
The I2C initialization (on component MAX77688) is already done in power_init, so we should not need an explicit call inside bootblock. Verified to boot on armv7/snow. Change-Id: I68c248a8b5fee4ab838b2fb708649e112559cc41 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2316 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-07armv7: Clean up arm/snow bootblock build process.Hung-Te Lin
Remove duplicated / testing code and share more driver for bootblock, romstage and ramstage. The __PRE_RAM__ is now also defined in bootblock build stage, since bootblock is executed before RAM is initialized. Change-Id: I4f5469b1545631eee1cf9f2f5df93cbe3a58268b Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2282 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-06armv7: Clean up: remove deprecated SPL.Hung-Te Lin
"SPL" from U-Boot is deprecated by bootblock in coreboot/arm, so we don't need it anymore. Change-Id: Id16877075d0b870839a10160073ad70777a2af0a Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2297 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 06:25:55 +0000