summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2013-03-02FrontRunner/Toucan-AF: work around AGESA RAM init crashing on rebootJens Rottmann
If you try to reset the system with outb(3,0x92), outb(4,0xcf9) or a triple-fault it will instead crash with a messy screen. As the more common outb(0xFE, 0x64) doesn't work with our setup, Linux will crash whenever you ask it to reboot. Closer inspection shows that on a warm boot of Coreboot agesawrapper_amdinitpost() always fails with error code 7. Looks like DDR3 re-init goes wrong somehow. I tried find the reason for this but was unable to. I am convinced this is not board specific but a bug in AGESA. In the end I had to settle for a workaround: if amdinitpost returns 7 this patch resets the system harder with outb(0x06, 0x0cf9), after that RAM init will succeed. As amdinitpost is early in POST this automatic reset is quick enough not to be noticable. I'd perfer a real fix, but that's all I have. Change-Id: I4763254b489f42a135232e45328ecf0d5c4d961a Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2573 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-02LiPPERT Toucan-AF [2/2]: actually implement mainboard supportJens Rottmann
Step 2: change the Persimmon code to adapt it to the new board's hardware. The Toucan-AF is a COM Express Compact Type 6 form factor embedded board: - AMD Fusion G-T56N (1.65 GHz dual core) or T40R (1 GHz single core) APU - 1-4 GB DDR3 memory down - 1x VGA, 2x DisplayPort (1 switchable to LVDS) - AMD A55E (Hudson-E1) southbridge - 8x USB 2.0 - 4x SATA - HD Audio (with codec on baseboard) - NEC uPD78F0532 microcontroller on I2C ("SEMA") - 7x PCIe2.0 x1 (1 on PEG) - Intel I210 GbE (on APU PCIe x1, can be disabled for additional PCIe) - 2x SST 25VF032B (SO8, soldered) 4 MB SPI flash (BIOS and failsafe BIOS) The Toucan-AF has no SIO on board. This patch includes basic support for a Winbond W83627DHG (PS/2, 2x RS232), because the ADLINK ExpressBase-6 used for evaluation happens to have one. The code may have to be adapted to the actual baseboard of the application. http://www.adlinktech.com/PD/web/PD_detail.php?pid=1132 Change-Id: I9041b905bad45852ac9b402fcbd5decbc98b377b Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2572 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-02LiPPERT Toucan-AF [1/2]: create board by forking AMD PersimmonJens Rottmann
Step 1: copy all files unmodified from Persimmon. This makes it much easier later to see how the two boards actually and deliberately differ when porting bugfixes from one to the other. Git's copy detection is imperfect (and slow). Change-Id: I1ff02913479c07679f8c3ae5e6dd7876e6000b55 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2571 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-02LiPPERT FrontRunner-AF [2/2]: actually implement mainboard supportJens Rottmann
Step 2: change the Persimmon code to adapt it to the new board's hardware. The FrontRunner-AF is a PC/104+ form factor embedded board: - AMD Fusion G-T56N (1.65 GHz dual core) or T40R (1 GHz single core) APU - DDR3 SO-DIMM socket (1.5 or 1.35V) - VGA and LVDS (via Analogix ANX3110) - AMD A55E (Hudson-E1) southbridge - 6x USB 2.0 - 1x SATA, 1x CFast socket - HD Audio (via Realtek ALC886) - PCI and ISA (via ITE IT8888) - NEC uPD78F0532 microcontroller on I2C ("SEMA") - Intel I210 GbE (on APU PCIe x1) - SMSC SCH3112 SIO - PS/2 - 2x RS232/485 - 2x SST 25VF032B (SO8, soldered) 4 MB SPI flash (BIOS and failsafe BIOS) http://www.adlinktech.com/PD/web/PD_detail.php?pid=1131 Change-Id: Id55f89d224ad669b351c36128b12299802b721ba Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2553 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-02LiPPERT FrontRunner-AF [1/2]: create board by forking AMD PersimmonJens Rottmann
Step 1: copy all files unmodified from Persimmon. This makes it much easier later to see how the two boards actually and deliberately differ when porting bugfixes from one to the other. Git's copy detection is imperfect (and slow). Change-Id: I2fd1bf8428fc8a1e7becee888b6182b9bd8166a0 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2552 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-03-01armv7/snow: Add S5P MSHC initialization in ROM stage.Hung-Te Lin
The SD/MMC interface on Exynos 5250 must be first configured with, GPIO, and pinmux settings before it can be detected and used in ramstage / payload. Verified on armv7/snow and successfully boot into ramstage. Change-Id: I26669eaaa212ab51ca72e8b7712970639a24e5c5 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2561 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-28CBMEM: always initialize early if the board supports itStefan Reinauer
This allows to drop some special cases in romstage.c Change-Id: I53fdfcd1bb6ec21a5280afa07a40e3f0cba11c5d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2551 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-28Drop SRC_ROOT from mainboard Makefile.incsStefan Reinauer
It's not used, and not needed. Change-Id: Ifca92f3606ac58fc26e09676488c3add5d84ae79 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2548 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-28Drop CONFIG_WRITE_HIGH_TABLESStefan Reinauer
It's been on for all boards per default since several years now and the old code path probably doesn't even work anymore. Let's just have one consistent way of doing things. Change-Id: I58da7fe9b89a648d9a7165d37e0e35c88c06ac7e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2547 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-27Google/snow: update the GPIO emulation.Ronald G. Minnich
Add two more GPIOs (total 6) as needed by the Google Snow laptop. These are faking out settings for now. This code is tested and working. Change-Id: I2077ffb8b85958eefdf54e19763d57cc1178ce89 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2538 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2013-02-27Persimmon: remove HDMI Audio, PCI device 00:01.1 from devicetree.cbJens Rottmann
Commit 8487229b (Persimmon doesn't have HDMI so the GNB HD Audio should be disabled.) turned off the device in AGESA. Now remove it from devicetree.cb, too. This prevents the following boot message: PCI: Left over static devices: PCI: 00:01.1 PCI: Check your devicetree.cb. Also clarify the line's comment a bit for the Fam14 boards which still retain this device (to counter the loss of information ;-). Change-Id: Ib671ed2e0d04bdef2869e8d70208d6e55cdea3fd Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2537 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-27Mainboard SMI S state handler was using the wrong definesMarc Jones
The PCH register bit definition for sleep type is a little confusing. For example, 7 is S5. To make this simpler for the mainbaord developer, the mainboard smi sleep hander is called as mainboard_sleep(slp_typ-2). A couple mainboard SMI handlers were using the PCH define for slp_ty, so S3 code would be run for S5 and S5 code would never be run. Change-Id: Iaecf96bfd48cf00153600cd119760364fbdfc29e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/2514 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-26AMD Inagua: buildOpts.c: Adapt whitespace to coding stylePaul Menzel
Mainly replace spaces by tabs and format comments correctly. Commit »Inagua: Indent and wihtespace cleanup« (f03360f3) [1] was unfortunately incomplete and also used spaces instead of tabs in some cases. Hopefully fix this once and for all to have a template for the other boards. [1] http://review.coreboot.org/547 Change-Id: If15c797581dfefe2a57cd6f26e5bdac4cdd014dd Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2526 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-26AMD Fam14 boards: reduce unnecessary differences, 2nd attemptJens Rottmann
This patch reduces unnecessary differences between AMD Inagua, Persimmon, Union Station, South Station and Asrock E350M1. It's only cosmetical, but makes them a little bit easier to compare. This is the remainder of the original http://review.coreboot.org/2464, parts of which somehow got lost in a flurry of refactoring and splitting patches. Change-Id: I034228be9edaaa4122506763d7bb4158f8e0ec53 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2529 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-25Supermicro H8SCM & H8QGI: Fix printk warningsMartin Roth
Changes: - Fix printk warnings for these two platforms by getting rid of the l length specifier and casting to unsigned int. This gets rid of a bunch of warnings like this one: agesawrapper.c:279, GNU Compiler 4 (gcc), Priority: Normal format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'UINT32' [-Wformat] Notes: - This is the same change that was done for Tyan s8226 in change: ddff32eb - http://review.coreboot.org/#/c/2451/ Tyan S8226: Fix printk warnings - I have not tested this change on either of these platforms, I have just compiled it. Change-Id: I46b4c13fde7473cd2a084c7c7cb5c893f1731b02 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2502 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25AMD Southstation: Fix final warningMartin Roth
Changes: - Add #include of delay.h in mainboard.c to pick up declaration of mdelay function. Notes: - This fixes this warning: mainboard.c:69, GNU Compiler 4 (gcc), Priority: Normal implicit declaration of function 'mdelay' [-Wimplicit-function-declaration] Change-Id: I72f333cd87215a7fc1e62d1d7ee4b2395444b03e Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2501 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25AMD Fam14 boards: Set P_BLK length to 6 for all processorsPaul Menzel
Currently on for example on AMD Persimmon and ASRock E350M1 Linux complains, that the PBLK length is invalid [1]. ACPI: Invalid PBLK length [0] Consequently, frequency scaling might not work correctly, though for these two boards it seems to work according to PowerTOP. Indeed, according to the ACPI specification [2], setting PBlockLength to 0 is only allowed if there is no PBlockAddress. Otherwise it has to be set to 6. 18.5.93 Processor (Declare Processor) […] PBlockAddress provides the system I/O address for the processors register block. Each processor can supply a different such address. PBlockLength is the length of the processor register block, in bytes and is either 0 (for no P_BLK) or 6. With one exception, all processors are required to have the same PBlockLength. The exception is that the boot processor can have a non-zero PBlockLength when all other processors have a zero PBlockLength. It is valid for every processor to have a PBlockLength of 0. And that is exactly what Linux is checking in `drivers/acpi/processor_driver.c` [3]. static int acpi_processor_get_info(struct acpi_device *device) { […] /* * On some boxes several processors use the same processor bus id. * But they are located in different scope. For example: * \_SB.SCK0.CPU0 * \_SB.SCK1.CPU0 * Rename the processor device bus id. And the new bus id will be * generated as the following format: * CPU+CPU ID. */ sprintf(acpi_device_bid(device), "CPU%X", pr->id); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, pr->acpi_id)); if (!object.processor.pblk_address) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n")); else if (object.processor.pblk_length != 6) printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n", object.processor.pblk_length); else { pr->throttling.address = object.processor.pblk_address; pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset; pr->throttling.duty_width = acpi_gbl_FADT.duty_width; pr->pblk = object.processor.pblk_address; /* * We don't care about error returns - we just try to mark * these reserved so that nobody else is confused into thinking * that this region might be unused.. * * (In particular, allocating the IO range for Cardbus) */ request_region(pr->throttling.address, 6, "ACPI CPU throttle"); } […] } This issue has proliferated to all AMD based boards so fix it for all of them by setting P_BLK length to 6. The DSDT of for example AMD Parmer and AMD Thatcher also set it to 6 everywhere so this solution is taken instead of setting the P_BLK system I/O base to 0 for all but the first processor which is how it is done for earlier AMD based boards. As note having to set this manually should not be needed and this should be autogenerated as done for most of the Intel boards and the AMD K8 based boards (`src/cpu/amd/model_fxx/powernow_acpi.c`). [1] http://www.coreboot.org/pipermail/coreboot/2013-January/073636.html [2] http://acpi.info/DOWNLOADS/ACPIspec40a.pdf [3] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=blob;f=drivers/acpi/processor_driver.c;h=e83311bf1ebdaaaea1adbf2de1351cca907d3465;hb=5da1f88b8b727dc3a66c52d4513e871be6d43d19#l351 Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> • ASRock E350M1: Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> • AMD Persimmon: Tested-by: Martin Roth <martin.roth@se-eng.com> Change-Id: Ie79fe4812532d124cc81747c75a4f3d88d00531c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2189 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-02-25Persimmon, Inagua: PCI devs 12.1, 13.1 (USB) don't exist, but 14.6 (GEC) doesJens Rottmann
USB ports 0-4 are handled by PCI devices 12.0 (OHCI) and 12.2 (EHCI). 12.1 simply does not exist, so remove it from devicetree.cb. While at it make the comment more detailed. Likewise for all USB ports. USB device 14.6 is the Broadcom GbE MAC integrated in the Hudson-E1. Add it to devicetree.cb. It's used on Inagua (on), but not on Persimmon (off). Change-Id: Idea27b3390fa4470f2592e79fdd633d5a218b97b Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2463 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2013-02-25AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID fieldPaul Menzel
The DSDT header contains the fields OEMID and OEM Table ID. See for example ACPI specification 4.0a [1] 5.2.11.1 Differentiated System Description Table (DSDT) on page 135. There Table 5-16 contains the descriptions. Field Byte Length Byte Offset Description =================================================== OEMID 6 10 OEM ID OEM Table ID 8 16 The manufacture model ID. Currently in coreboot there is no common method what to put in these fields. Mostly Intel based boards populate it with "CORE " ore "COREv4" and AMD based boards populate it with the board vendor and model number, abbreviated appropriately to fit into these fields. On most boards the proprietary vendor BIOS seems to leave these fields – displayed with `sudo dmidecode` under System Information – blank To Be Filled By O.E.M. and fill out the Base Board Information with the board vendor and model name. In [2] Jens Rottmann argues that the this is really just the table ID used for naming it and that »99% of the DSDT code is not board specific«. Both approaches seem to have their advantages, but using the second one, developers often seem to forget to update them (for example AMD Thather). The current situation is at least not optimal. and therefore at least unify the string in the OEM Table ID. If unifying the OEM ID is also a good idea this should be done too. If later on it should be decided that the board vendor and model should be used again, this should be somehow derived from Kconfig. The following command was used for the change [3]. $ git grep -l '\/\* TABLE ID \*\/' | xargs sed -i '/TABLE ID/s/"\([^"]*\)"/"COREBOOT"/' This patch is split out from [2]. [1] http://www.acpi.info/spec40a.htm [2] http://review.coreboot.org/#/c/2464/ [3] http://stackoverflow.com/questions/5207838/sed-regex-matching-text-between-to-double-quotes-when-a-certain-text-appears-i Change-Id: Iec98c615ce37f928abc1b500eff5aa865d772cb2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2472 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25google/snow: enable GPIO entries and CHROMEOS in buildingRonald G. Minnich
These were not separable or it would have been two CLs. Enable CHROMEOS configure option on snow. Write gpio support code for the mainboard. Right now the GPIO just returns hard-wired values for "virtual" GPIOs. Add a chromeos.c file for snow, needed to build. This is tested and creates gpio table entries that our hardware can use. Lots still missing but we can now start to fill in the blanks, since we have enabled CHROMEOS for this board. We are getting further into the process of actually booting a real kernel. Change-Id: I5fdc68b0b76f9b2172271e991e11bef16f5adb27 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2467 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25QEMU x86: northbridge.c: Name enabling device function to `northbridge_enable`Paul Menzel
Similar to the discussion on the coreboot list [1] Am Freitag, den 22.02.2013, 02:17 +0100 schrieb Peter Stuge: […] > Function names should try to be descriptive. "enable_dev" is not very > descriptive. I like "mainboard_enable" because it makes output such > as > > printk("%s: foo", __func__); > > useful. rename the function for the northbridge to `northbridge_enable`. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074549.html Change-Id: I262311ec511e394550330214621b8c37780c1d4e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2496 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25Persimmon: Fix warning, enable warnings as errorsMartin Roth
- Fix redefinition warning for SB_GPIO_REG50 introduced in commit fa8702cf - http://review.coreboot.org/#/c/2446/ Persimmon: adapt PCIe reset code copied from Inagua to actually match Persimmon The warning being fixed is: SB800.h:1491, GNU Compiler 4 (gcc), Priority: Normal "SB_GPIO_REG50" redefined [enabled by default] - Enable warnings as errors so no more warnings will be accidentally committed. Change-Id: Ib443b2bd2067f0b7d5f93f79170899a0f8f61060 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2494 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25Technologic TS5300: mainboard.c: Move { to next linePaul Menzel
This is coreboot’s coding style. Change-Id: I7441f2c1927a49a3b7171112b7798dae6b56cfb5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2492 Reviewed-by: Martin Roth <martin.roth@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Bernhard Urban <lewurm@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-24Siemens SITEMP G1P1: mainboard.c: Rename `init` to `mainboard_init`Paul Menzel
This is the common way to name that function, so unify that. Change-Id: I8a01051bd304039662894b89eed53ce14dde98b6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2491 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-23Add support for Google's Chromebook PixelStefan Reinauer
Ladies and gentlemen, I'm very happy to announce coreboot support for the latest and greatest Google Chromebook: The Chromebook Pixel. See the link below for more information on the Chromebook Pixel, and its exciting specs: http://www.google.com/intl/en/chrome/devices/chromebooks.html#pixel The device is running coreboot and open source firmware on the EC (see ChromeEC commit for more information on that exciting topic) Change-Id: I03d00cf391bbb1a32f330793fe9058493e088571 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2482 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-23AMD based boards: platform_cfg.h: Replace `_*BOARDNAME*_CFG_H_` with ↵Jens Rottmann
`_PLATFORM_CFG_H_` Reduce unnecessary differences between AMD based boards only using the file `platform_cfg.h` for configuration making them a little bit easier to compare. Inagua & co. mention the board name in several places which are really not that board specific. Sometimes people even forget to change it: Union Station’s platform_cfg.h starts with "#ifndef _PERSIMMON_CFG_H_". Funny. Change that to "_PLATFORM_CFG_H_" everywhere. The following command was used. $ find . -name platform_cfg.h | xargs sed -i '/_CFG_H_/s/_.*_/_PLATFORM_CFG_H_/' More boards seem to use that kind of naming (`git grep _CFG_H_`) but it is not certain that this will not break anything as for example the board AMD Dinar also has header files for configuration stuff for the north- and southbridge. $ git grep _CFG_H_ […] src/mainboard/amd/dinar/platform_cfg.h:#ifndef _PLATFORM_CFG_H_ src/mainboard/amd/dinar/platform_cfg.h:#define _PLATFORM_CFG_H_ src/mainboard/amd/dinar/platform_cfg.h:#endif //_PLATFORM_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#ifndef _RD890_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#define _RD890_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#endif //_RD890_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#ifndef _SB700_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#define _SB700_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#endif //_SB700_CFG_H […] Change-Id: Ida15fa6a7adfc770240ac30e795946000dae3f16 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2464 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-02-22*/acpi_tables.c: Use ALIGN macroPatrick Georgi
At the request of Paul Menzel, I reran an old classic of a coccinelle script: @@ expression E; @@ -(E + 7) & -8 +ALIGN(E, 8) @@ expression E; @@ -(E + 15) & -16 +ALIGN(E, 16) Change-Id: I01da31b241585e361380f75aacf3deddb13d11c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2487 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-21AMD Fam14 boards: Unify `acpi_table.c` by mainly using Inagua’s onePaul Menzel
There were just whitespace differences and three boards did not contain printk(BIOS_DEBUG, "alib\n"); dump_mem(ssdt, ((void *)alib) + alib->length); which is enclosed `#if DUMP_ACPI_TABLES == 1` to dump the ACPI tables. Basically the whitespace in the license header in Inagua’s file was fixed and then the file copied over to the other directories. Change-Id: I23f73acad427b5ec14cf51651af67240871f7488 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2470 Tested-by: build bot (Jenkins) Reviewed-by: Alvaro G. <andor@pierdelacabeza.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21AMD boards: Fix typo `@brief` in commentPaul Menzel
The following command was used to correct the typo. $ git grep -l @breif | xargs sed -i 's/@breif/@brief/' Change-Id: If0b579279de3c41571b9cda643836f5748a752a2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2473 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21Persimmon: platform_cfg.h: Declare codec arrays as `static const`Jens Rottmann
From ISO C99 standard: »The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature.« Found at <http://www.approxion.com/?p=41>. Change-Id: Iee7878affb2a5d157a94763083689d75e8218b2f Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2474 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21Persimmon: dimmSpd.c: Use spaces for alignment of if-predicatePaul Menzel
The relational operators in the if-predicate are aligned in all `dimmSpd.c` files so revert part of the change in commit 36abff1dc8e74beafa47ad83de17416681970916 Author: Marc Jones <marcj303@gmail.com> Date: Mon Nov 7 23:26:14 2011 -0700 Cleanup Persimmon mainboard whitespace. Reviewed-on: http://review.coreboot.org/427 to remove the incorrectly introduced tabs and to unify that. It might contradict the current coding style but it is even used in the latest code as seen in the following file. src/northbridge/amd/agesa/family15tn/dimmSpd.c Change-Id: Ib611267f99090d0830bdc2319527389f193ea1eb Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2471 Reviewed-by: Alvaro G. <andor@pierdelacabeza.com> Tested-by: build bot (Jenkins)
2013-02-21Persimmon: Indent commentPaul Menzel
This was overlooked in the following commit. commit 36abff1dc8e74beafa47ad83de17416681970916 Author: Marc Jones <marcj303@gmail.com> Date: Mon Nov 7 23:26:14 2011 -0700 Cleanup Persimmon mainboard whitespace. Reviewed-on: http://review.coreboot.org/427 Change-Id: If6bf4836b46077614a04c1e106c241a4f97da166 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2468 Tested-by: build bot (Jenkins) Reviewed-by: Alvaro G. <andor@pierdelacabeza.com>
2013-02-21AMD Fam14 boards: dimmSpd.c: Set `iobase` to `SMBUS0_BASE_ADDRESS` instead ↵Jens Rottmann
of `0xB00` For AMD Inagua, the following two commits commit 01f7ab93359ae0fee5784d35effbcbe0b596df18 Author: Kerry Sheh <shekairui@gmail.com> Date: Thu Jan 19 13:18:36 2012 +0800 Inagua: Synchronize AMD/inagua mainboard. Reviewed-on: http://review.coreboot.org/542 and commit d91c9b7e3cb9fdaeb9399a21907996130f3120bb Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 10:59:55 2011 -0600 AMD Inagua platform updates Reviewed-on: http://review.coreboot.org/136 replaced the constant `iobase` is set to by the define `SMBUS0_BASE_ADDRESS` from `OEM.h`. Do the same for AMD Persimmon, South Station, Union station and ASRock E350M1. Change-Id: If095cd9d9b28b118b4072c7c9d345bf620b774c9 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2453 Tested-by: build bot (Jenkins)
2013-02-21ARMV7: create a correct LB_SERIAL table entryRonald G. Minnich
If CONFIG_CONSOLE_SERIAL is set, and we can call the standard function and get a non-zero uart address, then we create an lb table entry. The code was mostly right, just needed a tweak. Change-Id: I5b36c7b4e580a23319b7ba92cc8ad61592b1757a Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2466 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-20Whitespace: Replace tab character in license text with two spacesPaul Menzel
For whatever reason tabs got inserted in the license header text. Remove one occurrence of that with the following command [1]. $ git grep -l 'MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.'$'\t' | xargs sed -i 's,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.[ ]*,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\ \ ,' [1] http://sed.sourceforge.net/grabbag/tutorials/sedfaq.txt Change-Id: Iaf4ed32c32600c3b23c08f8754815b959b304882 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2460 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2013-02-20Persimmon: Replace tab with space in address in license headerPaul Menzel
The following commit was too eager replacing spaces with tabs. commit 36abff1dc8e74beafa47ad83de17416681970916 Author: Marc Jones <marcj303@gmail.com> Date: Mon Nov 7 23:26:14 2011 -0700 Cleanup Persimmon mainboard whitespace. Reviewed-on: http://review.coreboot.org/427 Fix that with the following command. $ git grep -l 'Floor, Boston, MA'$'\t''02110-1301 USA' | xargs sed -i 's/Boston, MA[ ]*02110-1301 USA/Boston, MA 02110-1301 USA/' Change-Id: Ia118a8c19d94ce1f1048280a0f1d49d447cfa2a7 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2461 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2013-02-19Tyan S8226: Fix incompatible pointer warningMartin Roth
Fix warning: mptable.c:52, GNU Compiler 4 (gcc), Priority: Normal passing argument 3 of 'mptable_write_buses' from incompatible pointer type [enabled by default] mptable_write_buses is expecting a pointer to an int, so I changed the U8 isa_bus to an int to match. A U8 doesn't make sense if the value could be greater than 255 - certainly unlikely, but possible since the value of isa_bus gets set to the maximum PCI bus number + 1. Change-Id: I7ea416f48285922d6cf341382109993fd3f6405c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2450 Tested-by: build bot (Jenkins) Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-19Tyan S8226: Fix integer truncated warningMartin Roth
Fix Warning: sb700_cfg.c:129, GNU Compiler 4 (gcc), Priority: Normal large integer implicitly truncated to unsigned type [-Woverflow] The issue here was that an 8 bit value was being placed into a 2-bit bitfield. $ more src/vendorcode/amd/cimx/sb700/SBTYPE.h […] UINT32 AzaliaSdin0 :2; //6 UINT32 AzaliaSdin1 :2; //8 UINT32 AzaliaSdin2 :2; //10 UINT32 AzaliaSdin3 :2; //12 $ more src/mainboard/tyan/s8226/sb700_cfg.h […] * SDIN0 is define at BIT0 & BIT1 * 00 - GPIO PIN * 01 - Reserved * 10 - As a Azalia SDIN pin * SDIN1 is define at BIT2 & BIT3 * SDIN2 is define at BIT4 & BIT5 * SDIN3 is define at BIT6 & BIT7 */ #ifndef AZALIA_SDIN_PIN #define AZALIA_SDIN_PIN 0x2A #endif […] $ more src/mainboard/tyan/s8226/sb700_cfg.c […] sb_config->AzaliaSdin0 = AZALIA_SDIN_PIN; […] The 8 bit value 0x2A (binary 00 10 10 10), was being used incorrectly – I believe the original intent of this value was to enable the SDIN pins 0, 1, & 2. Because it was getting truncated as it was put into AzaliaSdin0, this wasn't happening and only SDIN0 was being enabled. I am leaving only SDIN0 enabled at this point to as not change the actual behavior on the platform. Change-Id: Icaeb956926309dbfb5af25a36ccb842877e17a34 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2452 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-19Tyan S8226: Fix printk warningsMartin Roth
Fix 84 warnings all like this one: agesawrapper.c:289, GNU Compiler 4 (gcc), Priority: Normal format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'UINT32' [-Wformat] Fixed by getting rid of the l length specifier and casting to unsigned int. Change-Id: Ic143c1034f760fa5efb2220aa33861e399ddd708 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2451 Tested-by: build bot (Jenkins) Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2013-02-19Inagua+children: fix simple copy & paste error in code to reset PCIe slotsJens Rottmann
Looking at AssertSlotReset, the comments and all other case's it's obvious this is a simple copy & paste error where someone just forgot to change one occurrance of the GPIO nr. Also the AMD Inagua schematics show that GPIO02 is what they really meant. Also forward the fix to boards copied from Inagua (AMD South Station, Union Station, Asrock E350M1). Change-Id: I6b9a3d473245fa27604b2f148a730290277a88ed Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2445 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-19snow: add cpu_cluster and domain resources via devicetree.cbDavid Hendricks
This patch will cause the resource allocator to actually set aside the memory resources using methods in the previous patch. The coreboot table output will include "RAM" entries (there were none before): coreboot memory table: 0. 0000000040400000-00000000bff001ff: RAM 1. 00000000bff00200-00000000bff00fff: CONFIGURATION TABLES 2. 00000000bff01000-00000000bfffffff: RAM Change-Id: I5cd76e93fc232fdae1754253efb4e9269b3a20c0 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2420 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-18Persimmon: drop useless DDR3 voltage code copied from InaguaJens Rottmann
Inagua can use GPIOs 178,179 to switch VMEM to 1.5, 1.35 or 1.25 V, which it does according to data read from the SO-DIMM's SPD EEPROM. On Persimmon (according to DB-FT1 rev. D schematics) both GPIOs are unconnected, there is no way to change the 1.5 V DDR3 voltage (save unsoldering a resistor). The whole code copied over from Inagua is useless. Removed the code, instead a comment hints at Inagua, for people who do designs based on Persimmon but do have a way to change VMEM. The line ...->DDR3Voltage = VOLT1_5; is supposed to make the AGESA DDR3 code select the RAM timings for the actually supplied voltage instead of the hoped-for but unavailable lower voltage. I have no idea how to test this, but in any case it can't hurt. Change-Id: Id098e09418b665645814a6ee2d41a3bff72238ba Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2448 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-18Persimmon: disable APU PCIe port 3Jens Rottmann
According to DB-FT1 rev. D schematics the APU PCIe lane 3 is unconnected. Reflect this fact in the mainboard code. Change-Id: Ic98f4a63ef971628df7fbf97f56b80ebe7cb8517 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2447 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-18Persimmon: adapt PCIe reset code copied from Inagua to actually match PersimmonJens Rottmann
Comparing Persimmon and Inagua schematics and Coreboot code show the PCIe reset code has been blindly copied even though it doesn't suit the Persimmon at all. The Inagua can employ GPIOs 21, 25, 02 to manually reset devices on APU PCIe lanes 0/1, 2, 3 respectively. (Appearently the motivation for this is to revive buggy PCIe gen1 devices which got confused by PCIe gen2 signal training.) However the Persimmon not only doesn't support this, it even needs these 3 pins for the PCI interface! Instead it uses GPIO50 to reset devices on lanes 0-2 all at once. Lane 3 is unconnected anyway. This patch adapts the Persimmon mainboard code according to the DB-FT1 rev. D schematics. Change-Id: I05a657d9bf8cc59acc4f5174eb20375165c860c7 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2446 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-15OT200: add CMOS supportChristian Gmeiner
nvramtool works as expected. root@CHGM-DEV-OT200:~# /home/vis/nvramtool -a baud_rate = 19200 debug_level = Emergency Change-Id: Ia25dc5b4f0ed3a2dd7cc67b7d3174db3a6eff70e Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/2382 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-02-14Chromebooks: mainboard.c: Do not spell Chromebook in CamelCasePaul Menzel
»Chromebook« is the official spelling [1]. So correct that with the following command. $ git grep -l ChromeBook | xargs sed -i s,ChromeBook,Chromebook, The incorrect spelling was only used for the chip name. [1] http://www.google.com/intl/en/chrome/devices/hp-pavilion-chromebook.html#hp-pav Change-Id: I9c19f399a3e3d36bd644ec375822daa384a14961 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2370 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-14Google Butterfly: thermal.h: Align macro contentPaul Menzel
Change-Id: I3729f9bf66fcd72fa8870bb56a9c253a7368c774 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2371 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14snow: Set up MMU after DRAM is workingDavid Hendricks
This was omitted earlier while we were debugging DRAM code (0a5bc7f). It was likely broken due to inconsistent units earlier on. Now that things are cleaned up and working, let's add it back in. Change-Id: I2f356355c98b2896e2371fa63b9c9f20ae76d634 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2379 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14snow: remove superfluous printk's from romstage mainDavid Hendricks
These were left over from earlier debugging and are no longer needed. They don't indicate any status or useful info (other than which line of code has been executed). Error messages are available in case something needs attention. Change-Id: Ie09fac29c42908cb8924169e56d8927fb76f02da Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2386 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-12Google Butterfly: acpi/thermal.asl: Fix typo »The*re* is no …«Paul Menzel
The commit introducing support for the Google Butterfly Chromebook commit d7bd4eb003f5b6a13943418ae0ac53248a2e34d2 Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon Feb 11 11:11:36 2013 -0800 Add support for "Butterfly" Chromebook Reviewed-on: http://review.coreboot.org/2359 contains the typo, which is corrected now. Change-Id: I932f4cd248cac71c3ede39a7da97162e791827cb Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2373 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-12Google Butterfly: gpio.h: Correct whitespace errorsPaul Menzel
Correct some whitespace inconsistencies introduced in the following commit. commit d7bd4eb003f5b6a13943418ae0ac53248a2e34d2 Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon Feb 11 11:11:36 2013 -0800 Add support for "Butterfly" Chromebook Reviewed-on: http://review.coreboot.org/2359 Change-Id: Ifeda7eb29ddf855cdfea41ddbd685441ede55756 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2374 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-12Google Parrot/Butterfly: fadt.c: Align macros correctlyPaul Menzel
The commits adding support for the Google Parrot Chromebook commit a7198b34ccf120df2a9e5b9f104812e96916ad08 Author: Stefan Reinauer <reinauer@chromium.org> Date: Tue Dec 11 16:00:47 2012 -0800 Add support for Google Parrot Chromebook Reviewed-on: http://review.coreboot.org/2026 and the Google Butterfly Chromebook commit d7bd4eb003f5b6a13943418ae0ac53248a2e34d2 Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon Feb 11 11:11:36 2013 -0800 Add support for "Butterfly" Chromebook Reviewed-on: http://review.coreboot.org/2359 had macros in `fadt.c` which were not aligned correctly and did not adhere to the coding style which uses just one space after `#define`. Fix this and use tabs instead of spaces everywhere. Change-Id: I1422c57a3bdc2faa29d2a6e2064e4d3aeed0f1cb Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2375 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-12armv7: Add emulation/qemu-armv7 board.Hung-Te Lin
To simplify testing ARM implementation, we need a QEMU configuration for ARM. The qemu-armv7 provides serial output, CBFS simulation, and full boot path (bootblock, romstage, ramstage) to verify the boot loader functionality. To run with QEMU: export QEMU_AUDIO_DRV=none qemu-system-arm -M vexpress-a9 -m 1024M -nographic -kernel build/coreboot.rom Verified to boot until ramstage loaded successfully by QEMU v1.0.50. Change-Id: I1f23ffaf408199811a0756236821c7e0f2a85004 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2354 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-11Add support for "Butterfly" ChromebookStefan Reinauer
We're happy to announce coreboot support for the "Butterfly" Chromebook, a.k.a HP Pavilion Chromebook. More information at: http://www.google.com/intl/en/chrome/devices/hp-pavilion-chromebook.html This commit also includes support for the ENE KB3940Q embedded controller running on Quanta's firmware. Change-Id: I194f847a94005218ec04eeba091c3257ac459510 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2359 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2013-02-11snow: fix high_tables_base calculationDavid Hendricks
It was off by a few orders of magnitude. D'oh. Change-Id: I9c8a3d5bd9ce261f914cfc7d05d86a1c61519b81 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2355 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-11AMD/Persimmon: Enable the 2nd COM portDave Frodin
The hardware is there, so turn it on. Change-Id: I40aff1e84a22a05599c62b9f0b20397df0a40b15 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2353 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-11Supermicro H8QGI: Substract 1 from MMCONF range limitKonstantin Aladyshev
MMCONF space is defined by two config parameters: MMCONF_BASE_ADDRESS (0xF800 0000) MMCONF_BUS_NUMBER (64) Coreboot allocates 1MB per bus, so MMCONF limit should be: 0xF800 0000 + 64*(0x0010 0000) - 1 = 0xFBFF FFFF Current code does not have (-1) component, this makes MMCONF limit equal 0xFC00 FFFF. Not 0xFC00 0000, because according to BKDG lower two bytes of MMIO limit always equal 0xFFFF: MMIOLimit = {MMIOLimitRegister[47:16], FFFFh}. Add (-1) to correct this issue. No functionality change has been experienced. The five times slower RAM speed compared to the proprietary vendor BIOS still remains. Change-Id: I2c6494c28bb8d36e54ceb2aa7d8d965b0103cbe9 Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2193 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-11armv7/exynos5250/snow: deprecate CONFIG_{RAMBASE,RAMTOP}David Hendricks
RAMBASE and RAMTOP are leftovers from the x86 port and do not apply the same way on ARM platforms. On x86 they refer to the low memory region where coreboot tables reside. However on ARM we don't have such a region which is architecturally defined. So instead we'll use the CPU-defined DRAM base address and the mainboard-defined DRAM size. This also has the pleasant side-effect of fixing the coreboot tables to not clobber ramstage code... Change-Id: I5548ecf05e82f9d9ecec8548fabdd99cc1e39c3b Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2351 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-10exynos/snow: move SPI GPIO setup to mainboard bootblock codeDavid Hendricks
This moves GPIO setup from chip-specific SPI code to mainboard- specific bootblock code. This makes exynos_spi_open a bit more generic so it can eventually be used for any SPI channel. This also benefits CBFS since the user can set media->context to to any set of SPI registers. Change-Id: I2bcb9de370df0a79353c14b4d021b471ddebfacd Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2347 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-10exynos/snow: set SPI clock rate in romstage mainDavid Hendricks
This moves the setting of SPI clock rate into romstage's main, which allows us to eliminate a bunch of dependencies from the bootblock (about 7KB worth). Change-Id: I371499bb4af6a6aa838294bc56f9dbc21864957a Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2346 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-09romcc: Use default romcc flags for most boardsPatrick Georgi
Except for one board, the flags can be derived from CONFIG_MMX and CONFIG_SSE. Change-Id: I64a11135ee7ce8676f3422b2377069a3fa78e24d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2336 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-09snow: do something useful in ramstage()David Hendricks
This cleans up Snow's trivial ramstage, gives it a coreboot table address and calls hardwaremain(). Change-Id: I84c904bcfd57a5f9eb3969de8a496f01e43bc2f6 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2328 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-08armv7/snow: Move clock initialization from bootblock to romstage.Hung-Te Lin
Exynos system clock can be initialized before RAM init, not necessary to be in the very beginning (boot block). This helps reducing bootblock dependency. Verified to boot on armv7/snow. Note: this patch was originally introduced in 2308, but there were some ordering issues so it was reverted. Change-Id: Ibc91c0e26ea8881751fc088754f5c6161d011b68 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2320 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-08armv7: Use same console initialization procedure for all ARM stagesHung-Te Lin
Use same console initialization procedure for all ARM stages (bootblock, romstage, and ramstage): #include <console/console.h> ... console_init() ... printk(level, format, ...) Verified to boot on armv7/snow with console messages in all stages. Change-Id: Idd689219035e67450ea133838a2ca02f8d74557e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2301 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-08console: Revise serial console configuration names.Hung-Te Lin
The console drivers (especially serial drivers) in Kconfig were named in different styles. This change will rename configuration names to a better naming style. - EARLY_CONSOLE: Enable output in pre-ram stage. (Renamed from EARLY_SERIAL_CONSOLE because it also supports non-serial) - CONSOLE_SERIAL: Enable serial output console, from one of the serial drivers. (Renamed from SERIAL_CONSOLE because other non-serial drivers are named as CONSOLE_XXX like CONSOLE_CBMEM) - CONSOLE_SERIAL_UART: Device-specific UART driver. (Renamed from CONSOLE_SERIAL_NONSTANDARD_MEM because it may be not memory-mapped) - HAVE_UART_SPECIAL: A dependency for CONSOLE_SERIAL_UART. Verified to boot on x86/qemu and armv7/snow, and still seeing console messages in romstage for both platforms. Change-Id: I4bea3c8fea05bbb7d78df6bc22f82414ac66f973 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2299 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-08Revert "armv7/snow: Move clock initialization from bootblock to romstage."David Hendricks
This reverts commit 9029f4b63f6d0e29bf1608e666cdb025de45ca24 This patch needs to go at the end of the UART patch set. Sorry 'bout the confusion! Change-Id: I5702c7d6130daf95776f2c15d24e5d253691cefd Reviewed-on: http://review.coreboot.org/2319 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-07armv7/snow: Move clock initialization from bootblock to romstage.Hung-Te Lin
Exynos system clock can be initialized before RAM init, not necessary to be in the very beginning (boot block). This helps reducing bootblock dependency. Verified to boot on armv7/snow. Change-Id: Ic863e222871a157ba4279a673775b1e18c6eac0d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2308 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-07armv7/snow: Remove power_init from bootblock.Hung-Te Lin
The power_init is not required on Exynos 5250 (snow) in bootblock stage. To get a cleaner and faster bootblock, we can remove it. Note, power_init internally calls max77686 and s3c24x0_i2c, so both files are also removed. Verified to boot on armv7/snow. Change-Id: I5b15dfe5ac7bf4650565fea0afefc94a228ece29 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2317 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-07armv7/snow: Remove redundant I2C initialization calls in bootblock.Hung-Te Lin
The I2C initialization (on component MAX77688) is already done in power_init, so we should not need an explicit call inside bootblock. Verified to boot on armv7/snow. Change-Id: I68c248a8b5fee4ab838b2fb708649e112559cc41 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2316 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-07armv7: Clean up arm/snow bootblock build process.Hung-Te Lin
Remove duplicated / testing code and share more driver for bootblock, romstage and ramstage. The __PRE_RAM__ is now also defined in bootblock build stage, since bootblock is executed before RAM is initialized. Change-Id: I4f5469b1545631eee1cf9f2f5df93cbe3a58268b Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2282 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-06armv7: Clean up: remove deprecated SPL.Hung-Te Lin
"SPL" from U-Boot is deprecated by bootblock in coreboot/arm, so we don't need it anymore. Change-Id: Id16877075d0b870839a10160073ad70777a2af0a Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2297 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-06snow: remove dead code from bootblockDavid Hendricks
This attempts to clean out some dead code which was copy + pasted into Snow's bootblock.c file, along with some unnecessary headers. Change-Id: If9f157a52395a047c249a2a6385e0e8ddf310e59 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2291 Tested-by: build bot (Jenkins)
2013-02-06exynos/snow: Move core/memory clock-related and board ID codeDavid Hendricks
This patch moves ARM core and DRAM timing functions around to simplify the dependencies for system_clock_init(). The original code was architected such that the system_clock_init() function called other functions to obtain core and memory timings. Due to the way memory timing information must be obtained on Snow, which entails decoding platform-specific board straps, the bottom- up approach resulted in having the low-level clock init code implicitly depend on board and vendor-specific info: main() ->system_clock_init() -> get_arm_ratios() -> CPU-specific code -> clock_get_mem_timings() -> board_get_revision() -> read GPIOs (3-state logic) -> Decode GPIOs in a vendor-specific manner -> Choose memory timings from module-specific look-up table ...then proceed to init clocks ...come back to main() The new approach gathers all board and vendor-specific info in a more appropriate location and passes it into system_clock_init(): main() -> get_arm_ratios() -> CPU-specific code -> get_mem_timings() -> board_get_config() -> read GPIOs (3-state logic) -> Decode GPIOs in a vendor-specific manner -> Choose memory timings from module-specific look-up table -> system_clock_init() ...back to main() Change-Id: Ie237ebff76fc2d8a4d2f4577a226ac3909e4d4e8 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2271 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-06snow: use bootblock build class for I2C codeDavid Hendricks
This gets rid of a bunch of duplicate I2C code in the bootblock. Change-Id: I51f625a0f738cca4ed2453fbcb78092e4110bc7e Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2289 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-06snow: use bootblock build class for GPIODavid Hendricks
This gets rid of a bunch of copy + pasted GPIO code. Change-Id: I548b2b5d63642a9da185eb7b34f80cbebf9b124f Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2288 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-05snow: use bootblock build class for UART codeDavid Hendricks
This gets rid of a bunch of copy + pasted code from Exynos UART files. Change-Id: I9fbb6d79a40a338c9fdecd495544ff207909fd37 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2286 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-02-04AGESA boards: Fix grammar in description of `OemCustomizeInitEarly`Paul Menzel
The following command was used to correct the grammatical mistake. $ git grep -l 'This is the stub function will call' | xargs sed -i s,This is the stub function will call,This stub function will call, '{}' sed: -e Ausdruck #1, Zeichen 6: Nicht beendeter `s'-Befehl As this file seems to have been copied around a lot, it originally seems to have come with the following commit for AMD Persimmon and AMD Inagua. commit 69da1b676cd3f126b27a6fd3c23c557ac1a03961 Author: Frank Vibrans <frank.vibrans@amd.com> Date: Mon Feb 14 19:04:45 2011 +0000 Add IBASE DB-FT1 and AMD Inagua motherboards. Patch 8 of 8. Change-Id: I2e6630a5172738b01e6def7062284f167e5508b1 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2268 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-04ASRock 939A785GMH: Align comments of DSDT’s `IndexField`Paul Menzel
Remove superfluous spaces and use tabulators. Change-Id: Ic8b32b10c4e287a058a395e54214b9923ee48bdd Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2276 Tested-by: build bot (Jenkins) Reviewed-by: Steve Goodrich <steve.goodrich@se-eng.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-04ASRock 939A785GMH: Align comments in DSDT header with tabsPaul Menzel
Change-Id: Ie64c231188310c4248ad0aaf9cdfcea12666bf2f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2275 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-04Use tabs instead of spaces to align comments in DSTD headerPaul Menzel
AOpen DXPL Plus-U and Intel XE7501devkit use »COREBOOT« as OEM Table ID. Unify the DSDT by aligning the comments in the DSDT header with tabs in accordance with the coding style [1]. [1] http://www.coreboot.org/Development_Guidelines#Coding_Style Change-Id: I78e6aa8d0318b519b1df5e2178d387dc58e48323 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2278 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-04Intel based boards: Use tab instead of spaces to align comment in DSDTPaul Menzel
Mainboards using `COREBOOT` as their OEM Table ID in their DSDT header were copied from the same source and therefore had spaces instead of a tab to align that comment for that header field. These are mostly Intel based boards. Fix that in accordance with the coding style [1]. [1] http://www.coreboot.org/Development_Guidelines#Coding_Style Change-Id: I299b955930dbd50b9717e8ff141ce8f3fd534e5f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2277 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-04exynos/snow: get rid of board-specific arbitration codeDavid Hendricks
Snow's AP, EC, PMU, and smarty battery share a bus. Both the AP and EC can act as a master, so to avoid conflicts an arbitration mechanism consisting of two GPIOs is used. By default, the AP "owns" the bus unless it is off (in which case the EC doesn't monitor the arbitration pins). This means the boot firmware does not need to worry about these lines. The payload may if it needs to communicate with the EC, though. In any case, board-specific bus arbitration logic does not belong in a low-level driver that is supposed to be generic for an entire CPU family. If the payload needs to talk to the EC, we'll deal with it there. Change-Id: I0774d4592af2b21b6ad668441532c5ceab988404 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2272 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-04exynos/snow: partial clean-up of snow bootblock using build classDavid Hendricks
This removes some duplicate code from Snow's mainboard bootblock by utilizing the bootblock build class. Change-Id: I153247370a8c5127260082dcdca3ebdc5e104fb8 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2270 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-03armv7: Add 'bootblock' build class.Hung-Te Lin
For ARM platform, the bootblock may need more C source files to initialize UART / SPI for loading romstage. To preventing making complex and implicit dependency by using #include inside bootblock.c, we should add a new build class "bootblock". Also #ifdef __BOOT_BLOCK__ can be used to detect if the source is being compiled for boot block. For x86, the bootblock is limited to fewer assembly files so it's not using this class. (Some files shared by x86 and arm in top level or lib are also changed but nothing should be changed in x86 build process.) Change-Id: Ia81bccc366d2082397d133d9245f7ecb33b8bc8b Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2252 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-02-01AMD/Persimmon: LVDS assignment was made to wrong DPxDave Frodin
The LVDS is on DP0, not DP1. Change-Id: I724764d0f013e7a10d974a8716e075139982ded2 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2259 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Mike Loptien <mike.loptien@se-eng.com>
2013-02-01snow: make romstage init DRAM controller and call ramstageRonald G. Minnich
This is a first cut at a romstage. It sets up memory, although that needs some work; and finds and loads a ramstage. Change-Id: I02a0eb48828500bf83c3c57d4bacb396e58bf9a5 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2245 Tested-by: build bot (Jenkins)
2013-02-01Fam15tn: Move SPD read from mainboards into wrapperMartin Roth
Continuing with the mainboard cleanup for F15tn, move the functions to read the SPD from the mainboards for Thatcher and Parmer into the wrapper for the northbridge/amd/agesa/family15tn. Move the SPD address customization for the mainboard into the devicetree.cb file. Unrelated side note - Porting.h has an un-closed #pragma pack(1) that can cause confusing side-effects. AGESA's structures all use this, but coreboot's don't. Be sure to include the coreboot .h files BEFORE Porting.h is included, not after. This fix has been tested. Change-Id: I89cdd225be61f60c6b8e7020e6f8b879983bbd96 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2190 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
2013-02-01armv7: unify stage hand-off routinesDavid Hendricks
This replaces the current stage-specific exit/entry functions with generic versions. Now all stages compile with stage_entry(), which is placed at .text.stage_entry.armv7, and stage_exit(). Snow's ramstage files are also updated to avoid build breakage. Change-Id: I953a2c4b8121bd4b66c3362557997a9ca3aa53b0 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2254 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-01-30armv7: Add SPI driver for Exynos.Hung-Te Lin
The SPI flash driver for Exynos chipset. Verified to boot on snow/armv7. Change-Id: I7eef67a9c57f825d09f13ea44c2b59b54345fa7b Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2229 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30Extend CBFS to support arbitrary ROM source media.Hung-Te Lin
Summary: Isolate CBFS underlying I/O to board/arch-specific implementations as "media stream", to allow loading and booting romstage on non-x86. CBFS functions now all take a new "media source" parameter; use CBFS_DEFAULT_MEDIA if you simply want to load from main firmware. API Changes: cbfs_find => cbfs_get_file. cbfs_find_file => cbfs_get_file_content. cbfs_get_file => cbfs_get_file_content with correct type. CBFS used to work only on memory-mapped ROM (all x86). For platforms like ARM, the ROM may come from USB, UART, or SPI -- any serial devices and not available for memory mapping. To support these devices (and allowing CBFS to read from multiple source at the same time), CBFS operations are now virtual-ized into "cbfs_media". To simplify porting existing code, every media source must support both "reading into pre-allocated memory (read)" and "read and return an allocated buffer (map)". For devices without native memory-mapped ROM, "cbfs_simple_buffer*" provides simple memory mapping simulation. Every CBFS function now takes a cbfs_media* as parameter. CBFS_DEFAULT_MEDIA is defined for CBFS functions to automatically initialize a per-board default media (CBFS will internally calls init_default_cbfs_media). Also revised CBFS function names relying on memory mapped backend (ex, "cbfs_find" => actually loads files). Now we only have two getters: struct cbfs_file *entry = cbfs_get_file(media, name); void *data = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, name, type); Test results: - Verified to work on x86/qemu. - Compiles on ARM, and follow up commit will provide working SPI driver. Change-Id: Iac911ded25a6f2feffbf3101a81364625bb07746 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2182 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30ASRock E350M1: Remove unused variable `reg8` from `romstage.c`Paul Menzel
[…] CC romstage.inc src/mainboard/asrock/e350m1/romstage.c: In function 'cache_as_ram_main': src/mainboard/asrock/e350m1/romstage.c:48:5: warning: unused variable 'reg8' [-Wunused-variable] This change was already done for AMD Persimmon in the following commit. commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 Change-Id: I8f1ae1a609b87b197583934f0556f66b64e6994d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2230 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-01-29armv7: Clean up the mmu setup a bitRonald G. Minnich
The previous incarnation did not use all of mmu_setup, which meant we did not carefully disable things before (possibly) changing them. This code is tested and works, and it's a bit of a simplification. Change-Id: I0560f9b8e25f31cd90e34304d6ec987fc5c87699 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2204 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2013-01-28AMD/Persimmon: DP0 is connected to a LVDS connectorDave Frodin
This change is required in order to use a LVDS panel attached to the LVDS connector. Change-Id: Id97c233f964151b6515bd46c797425d0e6690cbd Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2188 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-26AMD boards, ASRock E350M1: Remove whitespace in front of comma in DSDTPaul Menzel
commit 585a4006976e903599b7128200a29b5729777818 Author: zbao <fishbaozi@gmail.com> Date: Thu Apr 12 11:27:26 2012 +0800 Leverage the Pstate table created by AGESA. … introduced unneeded whitespace in front of a comma. Revert that part of the above commit. In the file for AMD Dinar tabs and spaces are mixed, but leave that alone for the beginning. Change-Id: I279cd0cb0be8c79258034733773f2ae1c2207cce Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2187 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-01-22F15tn: Fix all warnings, enable warnings as errorsMartin Roth
Enable 'all warnings being treated as errors' in thatcher and parmer. Fixed the following warnings on parmer / thatcher: src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatureLeveling.c: In function 'GetGlobalCpuFeatureListAddress': src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatureLeveling.c:291:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c: In function 'SaveDeviceContext': src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:245:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:309:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuPostInit.c: In function 'GetPstateGatherDataAddressAtPost': src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuPostInit.c:235:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] src/vendorcode/amd/agesa/f15tn/Proc/Mem/NB/TN/mntn.c: In function 'MemNInitNBDataTN': src/vendorcode/amd/agesa/f15tn/Proc/Mem/NB/TN/mntn.c:353:32: warning: assignment from incompatible pointer type [enabled by default] src/vendorcode/amd/agesa/f15tn/Proc/Mem/NB/TN/mntn.c:363:23: warning: assignment from incompatible pointer type [enabled by default] src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatureLeveling.c: In function 'GetGlobalCpuFeatureListAddress': src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatureLeveling.c:291:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c: In function 'SaveDeviceContext': src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:245:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:309:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] In file included from src/northbridge/amd/agesa/family15tn/northbridge.c:37:0: src/vendorcode/amd/agesa/f15tn/AGESA.h:1547:0: warning: "TOP_MEM" redefined [enabled by default] src/include/cpu/amd/mtrr.h:31:0: note: this is the location of the previous definition src/vendorcode/amd/agesa/f15tn/AGESA.h:1548:0: warning: "TOP_MEM2" redefined [enabled by default] src/include/cpu/amd/mtrr.h:34:0: note: this is the location of the previous definition In file included from src/northbridge/amd/agesa/family15tn/northbridge.c:41:0: src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuRegisters.h:378:0: warning: "LOCAL_APIC_ADDR" redefined [enabled by default] src/include/cpu/x86/lapic_def.h:9:0: note: this is the location of the previous definition In file included from src/mainboard/amd/parmer/BiosCallOuts.h:24:0, from src/mainboard/amd/parmer/mainboard.c:28: src/vendorcode/amd/agesa/f15tn/AGESA.h:1547:0: warning: "TOP_MEM" redefined [enabled by default] src/include/cpu/amd/mtrr.h:31:0: note: this is the location of the previous definition src/vendorcode/amd/agesa/f15tn/AGESA.h:1548:0: warning: "TOP_MEM2" redefined [enabled by default] src/include/cpu/amd/mtrr.h:34:0: note: this is the location of the previous definition Change-Id: Iecea28232f1761401cf09f7d2a77d3fbac2f5801 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2171 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-01-21Hudson: Cleanup - change SB800 references to hudsonMartin Roth
Go through southbridge/amd/agesa/hudson, thatcher and parmer mainboard directories and change all references to sb800 to reference hudson instead. This is just cleanup and should make no functional difference. Change-Id: Icd6a9a08c4bbf5e1aed394362d24c05811ed1fba Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2177 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 21:27:22 +0000