summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2014-05-08Rename from save_chromeos_gpios() to init_bootmode_straps()Kyösti Mälkki
This feature is no longer specific to ChromeOS builds. Change-Id: If27d4dc7caff8a551b5b325cdebdd05c079ec921 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5641 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-05-08ChromeOS boards: Use explicit include of chromeos.cKyösti Mälkki
Change-Id: I7b3d044fad1d6973910e9bef347478a45c149a4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5640 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-05-08superio/fintek/f71869ad: Make hwm devicetree configurableEdward O'Callaghan
Provision the configuration of the Fintek F71869AD Hardware Monitor's configuration by way of devicetree.cb. Make use of this in the jetway/nf81-t56n-lf board to properly control fan's. Change-Id: Ic25b29d1b7a9145e0e209b490b25a2cbc46cb75c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5580 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-08superio/fintek/f71869ad: Configure multi-func reg in devicetreeEdward O'Callaghan
Facilitate for the configuration of so called "Multi-function Select Registers" with devicetree.cb in ramstage. Make use of this new functionality in, mainboard/jetway/nf81-t56n-lf to correctly configure the Fintek's multiplexed GPIO pins to be in AMD TSI mode. This allows the Fintek to correctly talk to the Southbridge over the SMBus for CPU temperature data as to control fans and so on. Change-Id: I80abcd8b767fc4b22d00d1384ce4ef89fe837e3d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5576 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08mainboard/jetway/nf81-t56n-lf: Improve diags in romstageEdward O'Callaghan
romstage reports a completely unintelligible printf of "error level:", fix this and document meaning of the return values in source. Change-Id: Ia2fb9a6206e08822f6c2f62b69bf22cdae2ba819 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5465 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-08rambi: Make ec_in_rw a legacy GPIOShawn Nematbakhsh
ec_in_rw needs to be read by depthcharge, which only supports legacy GPIOs. BUG=chrome-os-partner:24408 TEST=Manual on Rambi. Cold + warm boot device, verify that depthcharge detects the proper ec_in_ro state. BRANCH=None Change-Id: I25802b445c795eb85580c22d880efee8eeb21318 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179228 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4993 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-05-08rambi: Change eMMC pin PUs to 2KShawn Nematbakhsh
Strengthen PUs on all eMMC pins to fix problems with eMMC not coming up on certain boards. BUG=chrome-os-partner:24353 TEST=Manual. Burn FW on board that previously failed to boot eMMC, verify chromeos can now install + boot from eMMC. BRANCH=none Change-Id: I7a9742968b8b8c2c42285ffc21de46aed9c87fb7 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178917 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4991 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08rambi: configure SD card signalsAaron Durbin
Rambi 1.5 boards use the native SD card controller on baytrail. Therefore, enable those signals. The CLK, D*, and CMD pins use 2K pulls as these were shown to not exhibit any errors when doing reads or writes to a DDR50 sd card. Note that if a servo is connected on needs to enable the sd_vref_sel rail to pp1800 as this causes issues with card detect if it is not set to pp1800. BUG=chrome-os-partner:24312 BRANCH=None TEST=Built and booted. Tested sd card read and write works in kernel. Also noted that write protect detection works as well. Change-Id: I520e2808acbd8494534fcb710411dbc0e12fc874 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178961 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4990 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08rambi: configure the LPE audio codec clockAaron Durbin
Rambi has the LPE audio codec connected to PMC_PLT_CLK[0]. Configure it for 25MHz. BUG=chrome-os-partner:23791 BRANCH=None TEST=Built and booted. Noted message in console output. Change-Id: I11297ba951149e5831c65ca70ac7bdbbed113098 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178781 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4987 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-07rambi: Remove outdated commentPatrick Georgi
Change-Id: Ic555d23a9112677a784dd814601f8202d4d17261 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5691 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-07rambi: handle single channel configsAaron Durbin
Some 1.5 boards have a single channel ram configuration. Accomodate such configs. BUG=chrome-os-partner:22865 BRANCH=None TEST=Built and booted ChromeOS. Change-Id: I513327e47b9211d2dd1ea960d7da671a3773cb91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178340 Reviewed-by: Nick Sanders <nsanders@chromium.org> Tested-by: Bernie Thompson <bhthompson@chromium.org> Tested-by: Nick Sanders <nsanders@chromium.org> Reviewed-on: http://review.coreboot.org/4983 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: use SERIRQ pad as keyboard irq in gpio modeAaron Durbin
The level shifting between 3.3V and 1.8V for the SERIRQ signal is not working. Instead use the SERIRQ pad as a gpio which is used as a direct IRQ signal for the keyboard interupt. BUG=chrome-os-partner:23965 BRANCH=None TEST=Built and booted rambi. Keyboard works with associated EC change. CQ-DEPEND=CL:177189 Change-Id: Ifc270ca38207828a6d4711551d4bde9121559cca Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177223 Tested-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-on: http://review.coreboot.org/4979 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: make ramids non-legacy gpio inputsAaron Durbin
The romstage code for rambi uses the mmio way of reading inputs. However, this is a problem is the GPIOs are set up as legacy mode. Subsequent warm resets mean the ram_id is read incorrectly. Ensure the ram_id is read consistently by keeping the GPIOs for ram_id in mmio mode. BUG=chrome-os-partner:24085 BRANCH=None TEST=Built and booted. And rebooted. Now seeing consistent ram_id values on warm resets. Change-Id: Ieff98c000be80998854f325754f1e819975d2be5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177230 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4977 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: distribute IRQs away from PIRQA on pci devicesAaron Durbin
Some of the drivers in the kernel were not so happy about having shared IRQs. Also, sharing IRQs means more code needs to be run in interrupt context to determine if the IRQ was meant for a particular device. Fix this. No more 'mmc1: got irq while runtime suspended' messages. BUG=chrome-os-partner:24056 BRANCH=None TEST=Built and booted. Looked at /proc/interrupts and noted no more sharing between pci devices. Change-Id: Ie5da102204ffe3156dd55ab17af77df245a57c97 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176792 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4973 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: fixup settings so trackpad can be found in kernelAaron Durbin
The kernel chromeos_laptop driver nomenclature expects the board name to not be in all caps. Fix this as well as the i2c address for the trackpad. BUG=chrome-os-partner:24307 BRANCH=None TEST=Built and booted. trackpad device is found. IRQs still not working yet. Change-Id: Id6be8ee4bce2835e303ea4fe63944be80d2d7ec2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176680 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4970 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: Add DIRQs for trackpad and touchscreenShawn Nematbakhsh
Also add the relevant info about these pins to the ASL tables + add SMBIOS type 41 data for these parts. BUG=chrome-os-partner:22863 TEST=Manual on Rambi. Set some pins to GPIO_DIRQ, and then verify DIRQ regwrites w/ GPIO_DEBUG look correct. Change-Id: Id40655f9fb2ea7b10e1ff58d0b2a8b4cc6f05ff8 Reviewed-on: https://chromium-review.googlesource.com/176299 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4963 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-06Introduce stage-specific architecture for corebootFurquan Shaikh
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-05-06rambi: disable HDA deviceAaron Durbin
For some reason HDA can now be disabled. It's unclear what changes in the baytrail code allowed this to happen, sadly. BUG=chrome-os-partner:22871 BRANCH=None TEST=Noted hda is not in lspci. Change-Id: I64e2560533be6f701fa66cd53c906b62b09012ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176394 Reviewed-on: http://review.coreboot.org/4961 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: enable SCI and SMI gpiosAaron Durbin
Rambi has 3 pins that need to be configured for SCI and SMI: 1. GPIO_CORE[0] - runtime SCI pin 2. GPIO_SUS[7] - SMI for firmware lid events 3. GPIO_SUS[0] - wake pin for S3 wakes from EC. Configure these pins now that the rest of the infrastructure is in place. The one thing that is yet to work is runtime SCI for lid events once booted. BUG=chrome-os-partner:23505 BRANCH=None TEST=built and booted. lid close at rec screen works. And wake from S3 with a keyboard press works. Change-Id: I5f8e38ec5f4cf1a8ef7aa7fcee9abc344d9b184f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176393 Reviewed-on: http://review.coreboot.org/4960 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: mainboard EC - SCI and SMI fixesAaron Durbin
As rambi is a baytrail board it doesn't have a dedicated wake pin. Therefore, one needs to enable the proper GPIO to wake up the sytem before going into S3. BUG=chrome-os-partner:23505 BRANCH=None TEST=Put system into S3. Keyboard press created wake event. Also, typed 'lidclose' on EC console while at recovery screen. Machine properly shutdown. Change-Id: Ic67b6bce93d57c620f498505d83197e4ae34a07d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176392 Reviewed-on: http://review.coreboot.org/4959 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: include the EC devices normally on superioAaron Durbin
The superio.asl file allows for the mainboard to hang devices off of the LPC bus in ACPI. Include the keyboard controller, EC memory map, and host interface's resources. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted. Noted resource reservations in dmesg. Change-Id: Ida6481cd4c4725b5d3946bc64179ee99c93b0106 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176134 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4950 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: update EC supportAaron Durbin
Fix the SMI and SCI gpios for Rambi. Also, add in the EC callbacks for the SMI handler. Note that the handler for GPI SMIs has not been tested yet as baytrail chipset code doesn't yet support setting up those configurations yet. BUG=chrome-os-partner:23505 BRANCH=None TEST=Noted that SCI was enabled in /sys/firmware/acpi/interrupts for the EC's SCI GPI. Also was able to see Chrome EC messages with CONFIG_DEBUG_SMI and powering down at the dev screen. Change-Id: I67b278fd38e1c09271d2c1e16e42f6e8c49e3a70 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176077 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4948 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: configure acpi SCI irqAaron Durbin
Baytrail has a configurable SCI irq. Add support for properly configuring SCI irq. Note that it is currently fixed to IRQ9, but the code supports setting it to the other supported values. The current mainboards using baytrail defer the madt IRQ override information to the chipset. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted. Noted 'SCI is IRQ9' message. Change-Id: I7b307bd58f9de944f0cb4c116107a15345499f2e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176075 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4946 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: mirror bayleybay's eMMC gpio setupAaron Durbin
These changes to the eMMC pads allows the kernel to see the eMMC device. One is able to install onto the eMMC device, and the kernel is loaded and booted from eMMC device. Note, that it may not fully boot because of other issues such as not-completely working ACPI support. BUG=chrome-os-partner:22580 BRANCH=None TEST=booted off of usb drive. can see eMMC device. Change-Id: I9c088398297a0b559383bdf4a389dd19a1110e0f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176073 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4945 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: Fix eDP panel functionalityDuncan Laurie
For some mysterious reason GPIO_S0_NC22 is making the eDP panel go entirely white when it is configured with internal pullup. Since these (supposedly XDP related) pins are unknown functionality lets set them to GPIO_DEFAULT instead of GPIO_NC. Additionally the VBIOS is being changed to issue int15 callback to determine the boot graphics device. If we list both LFP and EFP then the dev/rec screens will show on the panel when HDMI is not attached and otherwise will display on HDMI. BUG=chrome-os-partner:23507 BRANCH=rambi TEST=build and boot on rambi, see firmware/kernel screens on the panel when HDMI is not attached, and firmware screens on the panel and kernel screens on both when HDMI is attached. Change-Id: Ieb05a591d63c4f8e09fa154eeb76004d32579508 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175952 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4944 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06lenovo/t60: Add "IBM ThinkPad Embedded Controller" SMBIOS OEM StringTrevor Mosey
linux/drivers/platform/x86/thinkpad_acpi.c looks for an EC version string before loading, this code copies the vendor BIOS by exposing this string. This was originally part of x60's mainboard.c Change-Id: I5e54ea2833252bc4dbba46ceb67d78c435b34845 Signed-off-by: Trevor Mosey <uberushaximus@gmail.com> Reviewed-on: http://review.coreboot.org/5638 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-05baytrail: fix up FADTAaron Durbin
The FADT for baytrail had incorrect offsets leading to the kernel spewing a huge mess of ACPI errors. Fix these offsets to be initialized in the chipset code. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted into kernel on rambi. Login screen comes up. Change-Id: I89fc2a4fd800ff01cedf89b51cfb1369aceb9f03 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175663 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4941 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05baytrail: interrupt routing supportAaron Durbin
This provides the initial support for interrupt routing in bay trail. It includes both acpi changes and board changes to ensure the interdependencies are met with the current ASL code. The PIRQ routing is handled by the mainboard exporting an irqroute.h header that describes the per device and PIRQ PCI settings. There are still a lot of ACPI errors in the kernel with this change, though. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted rambi into kernel. Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Id8a865a24fc8d49743c0b54efdb64aaef52fcd8e Reviewed-on: https://chromium-review.googlesource.com/175700 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4940 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA: Fix BiosCallouts table formattingKyösti Mälkki
Already done for fam15tn and fam16kb. Change-Id: I3da36bfe6fd1805867eee5aa1f017c4fda084349 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5660 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA: Implement EmptyHeap()Kyösti Mälkki
Heap allocation begins with BIOS_HEAP_MANAGER, no need to clear the fields individually. Change-Id: Ia1af84bd09d1edf8f72223752557d44a96dec6e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5659 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam14: Use common calloutsKyösti Mälkki
Backported from fam15tn and fam16kb. This also implements GetHeapBase() to satisfy some requirements of HAVE_ACPI_RESUME for the following boards: amd/inagua amd/south_station amd/union_station asrock/e350m1 Change-Id: I488d063d4eabf4bf45bcbabd1e8f13b88b2ef401 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5658 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam14: Add fam14_callouts headerKyösti Mälkki
Backported from fam15tn and fam16kb. Change-Id: I868352b32ff56a8386c615ab1a9f59e7e875292e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5657 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05jetway/nf81-t56n-lf: Revert change on function prototypesKyösti Mälkki
These function prototypes to remain identical across all AGESA families. Change-Id: If2a0a08fa7122e6becded37d032d3c40bde2d149 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5656 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam15: Add GetHeapBase()Kyösti Mälkki
While fam15 boards do not select HAVE_ACPI_RESUME, backport this from fam14. Implementation of this function is common across different families. Change-Id: I222b418a0a79bbdf5f5cce6c876243ecb4912256 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5655 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam12: Add GetHeapBase()Kyösti Mälkki
While amd/torpedo does not select HAVE_ACPI_RESUME, backport this from fam14. Implementation of this function is common across different families. Change-Id: I0e5099a0991a2655ec2b6990929196900e842fc1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5654 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam15tn: Use common GetHeapBase()Kyösti Mälkki
Implementation of this function is common for all boards in family, and also across different families. Change-Id: I562a132fa6d3ade2700d9a375d7aa21fcf8ea890 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5653 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam16kb: Use common GetHeapBase()Kyösti Mälkki
Implementation of this function is common for all boards in family, and also across different families. Change-Id: I6aab710e76af9a361f0c0006922019a52feb3f6f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5652 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam15: Use common calloutsKyösti Mälkki
Backport from fam15tn and fam16kb. Change-Id: I6d8f9a88f0dc43c36efb168c0111a6e2bcdda5fd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5651 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam15: Add fam15_callouts headerKyösti Mälkki
Backported from fam15tn and fam16kb. Change-Id: I13ca70d141a46220a5d8ea7bb3898bc7d7258424 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5650 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam12: Move dimmSpdKyösti Mälkki
Implemented under northbridge/ on other families. Change-Id: I4d21af9d6c0f61eb1597e8e7095c08dd87ae2a84 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5649 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam12: Add fam12_calloutsKyösti Mälkki
Although amd/torpedo is only fam12 board at the moment, backported this from fam15tn and fam16kb. Change-Id: I72a856e2eb455a8428a886f0c4217ff80e60eb78 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5648 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AMD F14h boards: Sanitise headers in agesawrapper.cEdward O'Callaghan
Change-Id: Ic9c5e8abb3da020a642635ee74c9242091923619 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5628 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-05AMD F14h boards: Use std memset/memcpy func over AGESAEdward O'Callaghan
In amd/{persimmon,inagua} and derived boards avoid using AGESA reimplementation of memcpy as following the reasoning in: e2f3bfc jetway/nf81-t56n-lf: Use std memset/memcpy func over AGESA Change-Id: I943b46103c3bf1c5fd88b25e9f9595b9adfcafeb Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5625 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-05lenovo/t60: Move mainboard_enable() code into a mainboard_init()Trevor Mosey
mainboard_enable() is now modelled after google/parrot where the enable function only sets dev->ops->init for the root device to point to a mainboard_init() function, which in turn is called in a later pass over the device tree to do the actual initialization. Change-Id: I89a5192bd45ca8321b2b1ac49b073122e0f6ee2b Signed-off-by: Trevor Mosey <uberushaximus@gmail.com> Reviewed-on: http://review.coreboot.org/5637 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-03Drop useless mainboard-romstage definesPatrick Georgi
Some src/mainboard/*/*/romstage.c files use defines which later modify the behaviour of included .c files. Since it's a pain to work out what is affected by these, drop values that are only defined in the board but never used, or defined to identical values as in spd.h (and use that one instead). Change-Id: I8143b26fddc32a40ac4e611a6287bf7f144267dc Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5639 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-02qemu-armv7: Kconfig cleanupKyösti Mälkki
RAMBASE, RAMTOP and XIP_ROM_SIZE are not used with ARCH_ARMV7. Change-Id: I072ed022e3279ed23716fdf78d0db8952b3fdb32 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5627 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-02asrock/e350m1: Sanitize #includesEdward O'Callaghan
Following similar reasons as: 5ff4b08 jetway/nf81-t56n-lf: Sanitize #includes Change-Id: Ie88b884bc2d4481bc2583d5be1f4d1376547f3c3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5614 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2014-05-02jetway/nf81-t56n-lf: Set OEM to Jetway in DSDT and mptablesEdward O'Callaghan
Jetway builds this hardware, so let us be sure to set the truth in the DSDT Definition block and MPTables. Change-Id: I2dfb89152aa3b895ec6975293c5a5998ab6b52bd Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5630 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-02asrock/e350m1/devicetree.cb: Correctly indent device linePaul Menzel
Fix up commit dfa8a32f [1]. src/mainboard/asrock/e350m1: Properly indent devicetree.cb [1] http://review.coreboot.org/5612 Change-Id: I59b3ec2f00d69951aa8a96c4a9c3de5b219acbfb Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5619 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-02mainboard/jetway/nf81-t56n-lf: Properly indent devicetree.cbEdward O'Callaghan
Following the reasoning in, dfa8a32 src/mainboard/asrock/e350m1: Properly indent devicetree.cb Change-Id: I88ca01519c1c47a7eb0d564a55c945589f9d32af Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5629 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-02mainboard/*: Use generic winbond romstage in place of w83627thgEdward O'Callaghan
Use the generic implementation of winbond in place of the model specific w83627thg_enable_serial() as so that it maybe removed later. Change-Id: Ice1a0dc428de9a3ddfb79e877fb03c7a8e09665f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5603 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-01ChromeOS: Use common fill_lb_gpio()Kyösti Mälkki
Change-Id: I2ba7a1c2b2e6ce2c00c9a2916141bed67930ba2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5586 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-01ChromeOS: Remove oprom_is_loadedKyösti Mälkki
A global flag oprom_is_loaded was used to indicate to U-boot that VGA option ROM was loaded and run, or that native VGA init was completed on GMA device. Implement this feature without dependency to CHROMEOS option and replace use of global variable oprom_is_loaded with call to gfx_get_init_done(). Change-Id: I7e1afd752f18e5346dabdee62e4f7ea08ada5faf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4309 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-01google/stout: Fix build without ChromeOSKyösti Mälkki
Currently we have no developer or recovery mode switches when building without ChromeOS. Change-Id: I49adfcd8408838cf581430970be5efcef11ba06b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5596 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-30baytrail: Clean up NVS regionDuncan Laurie
There is a lot of NVS allocated to things that are not really used. Most of these are removed and some are moved around. Thermals are expected to be handled with DPTF so I've removed that bit of code but have not yet cleaned up the thermal zone. I left in the SIO BARs since I think we will need those still even though they may need work still. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: Id16ee67e6b3709a303c001afd72947147f938127 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175626 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4936 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Add reserved MMIO regions to ACPIDuncan Laurie
Add a length define for all the reserved MMIO regions and use them in the ACPI code to reserve the regions there. Add a region for the "abort page" documented in the EDS. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I2060dca0636a2fdc0533ddd0826f94add2c272c3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175624 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4934 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Fix XHCI problems and re-enableDuncan Laurie
- a few clock gating bits were set improperly and were preventing the system from transitioning out of S0 state. - the XHCC registers were not getting the top byte set properly which includes things like DMA write request size and request boundary crossing control. This was causing memory corruption. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=build and boot kernel from USB on rambi with XHCI driver Change-Id: I8e8135a793dfbaa1f163766702e3a8f19bba9703 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175558 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4933 Tested-by: build bot (Jenkins)
2014-04-30mainboard/: Avoid including early_serial.c from w83627hfEdward O'Callaghan
Following the reasoning of: dbbc136 mainboard/asrock/e350m1: Avoid including early_serial.c Change-Id: I5d729b90cf6713de2674fb00c726cd2944a3ab4e Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5597 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-30console: Move UART port defaults to mainboardKyösti Mälkki
Correct selection of UART depends of board layout, not the CPU internals, so default setting should originate from mainboard. Change-Id: Ibf0ab0847ccce73c22704e86983dbe3d24ebc8a0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5618 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-30console: Drop EARLY_CONSOLE optionKyösti Mälkki
We have means to easily disable a specific console in romstage if necessary, so this global option makes little sense. The option was initially introduced as a work-around for build issues around CACHE_AS_RAM, ROMCC and ARCH_ARMV7 dependencies for UARTs. Change-Id: I797bdd11a48ddd813d3ee7ccef9a0c050f16f669 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5607 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-30uart: Support multiple portsKyösti Mälkki
The port for console remains to be a compile time constant. The Kconfig option is changed to select an UART port with index to avoid putting map of UART base addresses in Kconfigs. With this change it is possible to have other than debug console on different UART port. Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5342 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-29lenovo/{t60,x60}/devicetree.cb: Fix typo in Controller in commentPaul Menzel
$ git grep -l Cnotr | xargs sed -i 's/Cnotr/Contr/g' Change-Id: Iee826a8092dbf17f8a28b7eb7b6d183464c6e498 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5325 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-29src/mainboard/asrock/e350m1: Properly indent devicetree.cbEdward O'Callaghan
Trivial: clean up spaces to tabs to properly indent devicetree.cb Change-Id: Id5577139cfa039898af3b2158fdd6869ac9d2ec1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5612 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-29mainboard/kontron/986lcd-m: Remove a duplicate headerEdward O'Callaghan
Change-Id: I0dd50722c1ccbcb8a21b8fbab4d706d6b2f2b130 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5602 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-28superio/winbond/w83627ehg: Convert romstage to generic componentEdward O'Callaghan
Convert the serial init to the generic romstage component and corresponding boards using this sio. Change-Id: Ib9f981f43e047013f9cbe20a22246ee2ed3ecf50 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5589 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28mainboard/tyan/s8226: Remove redundant sio headerEdward O'Callaghan
Change-Id: I8d258c12d03e71fb525251104b4fa81596ad2187 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5599 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28superio/winbond/w83627dhg: Convert romstage to generic componentEdward O'Callaghan
Convert the serial init to the generic romstage component and corresponding boards using this sio. Change-Id: I36bcf38c4351130be1ed924ecfe606336d0433f3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5588 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28mainboard/asrock/e350m1: Avoid including early_serial.cEdward O'Callaghan
Use generic winbond romstage serial init symbols instead of model specific implementation. We do this on a case by case basis as some boards are ROMCC and so need to #include .c files. This is a step to migrate non-romcc boards to a more generic superio framework. Change-Id: I56f6d9ec77cd21a612cbbdb48634543f34a2e72c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5591 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28AMD: Add common header file for CAR setupKyösti Mälkki
Change-Id: I24b2cbd671ac3a463562d284f06258140a019a37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4683 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-26superio/fintek/*: Factor out generic romstage componentEdward O'Callaghan
The romstage of Fintek Super I/O's is identical, leading to replication of essentially the same code prone to bitrot. Herein we consolidate the early pre-ram UART initialisation code into fintek/common, rather we leave the exceptions to be implemented under model/. More precisely we provide a well documented version of early_serial.c under fintek/common and select by way of Kconfig as a generic romstage component to Super I/O support. We leave future Super I/O's the option to implement `non-standard` initialisation code should such a (unlikely) need araise. A primary advantage is that new support for romstage serial is now trival to add. We also provide some Kconfig documentation while here. Change-Id: I3c62561558a62ece944a167ba302fb7076bba001 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5575 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26lippert/hurricane-lx: Kconfig cleanupPatrick Georgi
A Kconfig option defined instead of selected that really comes from somewhere else. Change-Id: I8730d12ed053520b794655e943c93583c441f3f1 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5542 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-26Rename coreboot_ram stage to ramstageFurquan Shaikh
Rename coreboot_ram stage to ramstage. This is done in order to provide consistency with other stage names (bootblock, romstage) and to allow any Makefile rule generalization, required for patches to be submitted later. Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5567 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26Get rid of HAVE_INIT_TIMER config optionFurquan Shaikh
There is redundancy in terms of use of init_timer. We have a Kconfig option to decide whether a board has init_timer as well as we use a stub for init_timer in places where we do not have any init_timer defined. Thus, remove the Kconfig option. Henceforth, all boards that do not have init_timer functionality can include a stub_timer if required. Change-Id: I35d38ec686f4dc92861cf9248f9b540323cd98ae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5569 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-26superio/ite/it8716f: Rewrite from hardcoded base addrEdward O'Callaghan
Following the same reasoning as: HASHHERE superio/ite/it8721f: Rewrite from hardcoded base addr Removing hard coded magics and expose sio pnp api in romstage. Change-Id: I27433cb1a84b3641a6110ecf6bd5021e00769aba Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5565 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26superio/ite/it8721f: Rewrite from hardcoded base addrEdward O'Callaghan
Rewrite early_serial.c implementation to honour a passed base address in device_t, removing any hard coding of values. We also expose early sio init functions as romstage symbols to avoid falsely #including "early_serial.c" in romstage.c of board support. Change-Id: I521b8f7cf85173345b90745c6f2ab66e25429f5d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5561 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-26mainboard/*: Remove DUMP_ACPI_TABLES from amd boardsEdward O'Callaghan
Dumping the ACPI tables in this way has limited use, is not likely to be used and is poorly implemented. There are much more sophisticated tools available on Linux for debugging ACPI as such this code is outside the scope of coreboots 'bring up the hardware only' philosophy. A more generic implemention could be done with hexdump() in coreboot proper following on from this cleanup. Change-Id: Ifd3bfb76338609d18fcf7158d3c9a6d7c06c8847 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5530 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-22Drop drivers/generic/debugKyösti Mälkki
Not very popular nor useful nowadays. Change-Id: I3dc0f7aaf188950a43f5350d3a95669fbbdcfd94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4554 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-21hp/pavilion_m6_1035dx: Map PCIE PME sources to GPE 0x18Alexandru Gagniuc
The PCIE PME pin from the APU is connected to GEVENT8, but the northbridge's ASL hardcodes this to GPE 0x18. Adjust the SCI map accordingly. Change-Id: Ie395e62919f6e97ef9bcc45c736f9debf4e09ba0 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5556 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-21hp/pavilion_m6_1035dx: Map USB and PWRB PME sources to GPE 11Alexandru Gagniuc
Hudson ASL files assume the USB power event notifications are mapped to GPE 0xb. Since that GPE is not used on this board, map these events to GPE11. This GPE is already handled in ACPI via Method(_L0B). We adjust this method to also notify the XHCI controller at PCI 10:0. Change-Id: If33dd4bb5830820227f7c8b34594886cfae37282 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5554 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-21AMD hudson and yangtze boards: Let mainboard declare power buttonAlexandru Gagniuc
The power button was declared by hudson's ASL as \_SB.PCI0.PWRB, and always had the wake source declared as GPE3. This is not the correct wake source for all boards. On some laptops declaring a wake source is not needed, as the wake mechanism is handled by the EC. Move the declaration of the power button to mainboard ASL files, and scope it as \_SB.PWRB . This also makes the naming consistent with the examples in the ACPI spec. The wake source for the PWRB of HP Pavilion M6 1035dx is removed, as it is incorrect. Change-Id: I9c76566025e7f200c0376673f6c6ea299afa4a5d Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5546 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-21mainboard/asus/m5a88-v/devicetree.cb: Fix formattingEdward O'Callaghan
Strip incorrect comments pretaining to the superio, and replace spaces with tabs. Change-Id: Ib3f6094c552777552d0ec06e3236210ee2e7b05d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5562 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20hp/pavilion_m6_1035dx: Do not re-init EC and lid SMI on S3 resumeAlexandru Gagniuc
It's not needed, and puts the EC back into APM mode. The EC does not shut down during S3 sleep, so we don't need to re-initialize it. Lid SMI will have been disabled in the switch to ACPI mode, don't re-enable it. Change-Id: I2c06df140f63427dac32ae095d29e68f64135358 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5555 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20hp/pavilion_m6_1035dx: Suspend/resume on lid close/open with ACPIAlexandru Gagniuc
This patch completes ACPI support for the lid switch. The lid SCI now notifies the OSPM of the status change when the lid is closed or opened, allowing system to suspend. The wake source is also declares, and the system wakes when the lid is opened. The system resumes successfully, but the display still does not come back on. Change-Id: I803c4fc64e15f8d1a90791ec246af66604646d8b Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5549 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20hp/pavilion_m6_1035dx: Add GEVENT to GPE SCI mapping tableAlexandru Gagniuc
Each GEVENT pins can be mapped to a specific GPE via the SCI map. The default mapping is not appropriate for this laptop, so use the AGESA functionality to map currently known events. Change-Id: Ifa50bf000cfc8e77a6a4d84752f89838f165f7a0 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5548 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20hp/pavilion_m6_1035dx: Move GEVENT/GPE definitions to common fileAlexandru Gagniuc
These definitions were scattered in a couple of files, and we risk scattering them all over the place. Provide a common file for these definitions. Change-Id: I1fe99e5097cf10a349661f3b2ae2377f5cdd6103 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5547 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20AMD AGESA cimx/sb700: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
Following boards use cimx/sb700: amd/dinar supermicro/h8qgi supermicro/h8scm tyan/s8226 Only amd/dinar had APIC_ID_OFFSET defined, thus all had 0x0. There was a nonsense preprocessor directive (MAX_CPUS * MAX_PHYSICAL_CPUS >= 1). Except for tyan, (MAX_CPUS * MAX_PHYSICAL_CPUS) % 256 == 0. Together with documented 4-bit restriction for APIC ID field, this APIC ID programming matches with MP tables and ACPI tables. I believe this would also fix cases of cimx/sb700 with MAX_CPUS<16, which we do not have in the tree. Change-Id: If8d65e95788ba02fc8d331a7af03a4d0d8cf5c69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5539 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20AMD AGESA cimx/sb800: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
All boards had APIC_ID_OFFSET=0 and MAX_PHYSICAL_CPUS=1. Change-Id: I6f08ea6de92a2af79fb3a99c5edd942b3a321c43 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5538 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-04-20amd/torpedo: Remove unused Kconfig optionsKyösti Mälkki
These are not used with cimx/sb900 vendorcode. Change-Id: I489ee80c739b31edac649491497162c65316996e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5537 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20mainboard: New port Packard Bell LM85.Vladimir Serbinenko
Change-Id: I8c1548470c605d06825fe35579879e806bf33542 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5271 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-04-19hp/pavilion_m6_1035dx: Implement MB.LIDS ACPI methodAlexandru Gagniuc
Change-Id: I654ca745f7404b86aa25fb2e696751d616d0ca03 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5517 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-19hp/pavilion_m6_1035dx: Implement ACPI for wireless toggle hotkeyAlexandru Gagniuc
Change-Id: I2e9ab68263648af8c9d46999e960f0a0711b61d7 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5516 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-19ec/compal/ene932: Update to use coreboot EC-mainboard APIAlexandru Gagniuc
This patch implements a simple interface between the EC and mainboard ASL code. This interface does not rely on the preprocessor, and prevents name conflicts by scoping the interface methods. As this interface is documented on the coreboot wiki, an in-tree documentation is not provided. Change-Id: If0b09be4f5e17cc444539a30f0186590fa0b72b5 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5515 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-19hp/pavilion_m6_1035dx: Rename "LID0" ACPI object to "LID"Alexandru Gagniuc
There is only one lid switch, so it does not make sense to number it. This naming is also consistent with the examples in the ACPI spec. Change-Id: Ida0a4a89ca03b2aad4fc77e52996e86332d370cd Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5545 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-18hp/pavilion_m6_1035dx: Shutdown when lid is closed on non-ACPI OSAlexandru Gagniuc
This is handled by generating an SMI when GEVENT22 goes low. This pin is driven by the EC when the lid opens or closes. This SMI is disabled when switching to ACPI mode, so ACPI OSes are not affected. Change-Id: I38193572bf0416fd642002dba94c19257f0f6f5b Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/171 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-18southbridge/hudson: Compile refactored SMI setup utilities in SMMAlexandru Gagniuc
Refactor hudson_enable_gevent_smi() to allow configuring the interrupt mode and trigger level. Move the utilities which are useful in SMM to a separate file that is included in both ramstage and SMM. This is useful for SMI handlers which need to enable or disable GEVENT SMIs on-the-fly. A follow-up patch makes use of this infrastructure. Change-Id: Ifa4c300c00c178b18d7280690cfc4b8367c669b8 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/170 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-18hp/pavilion_m6_1035dx: Shutdown on low battery with non-ACPI OSAlexandru Gagniuc
Intercept the low battery SMI from the EC, and shut down the system immediately. The EC only sends this SMI when the OS did not enable ACPI mode, so ACPI OSes are not affected by this. On the other hand, payloads such as GRUB or SeaBIOS will experience the shutdown. This behavior is helpful for protecting the battery, for example, when the OS fails to boot and we are stuck in the payload. The low battery SMI is triggered at 10% charge, at which point the risk of cell degradation exists. Change-Id: I4c6c1a4feed8576cbdbb1945768de0805a1f5e42 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-18msi/ms9652_fam10: minor Kconfig cleanupPatrick Georgi
SMP and IOAPIC shouldn't need to be redefined here, select is enough Change-Id: I8a66374205b671498ce21b3f174af14e98dbfe48 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5541 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-17AMD hudson yangtze: Drop MAX_PHYSICAL_CPUS in commentsKyösti Mälkki
Change-Id: I81de291da7b3db8d04a127d5a304b558f1c75b34 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5535 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-17hp/pavilion_m6_1035dx: Remove code which dumps ACPI tablesAlexandru Gagniuc
Dumping ACPI tables in canonical form has very little value, and is of questionable use except when debugging acpigen. Remove the code which dumps the tables. Change-Id: Id13c88cee8674b13e5cf5b5ed32c26283e586fd9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5526 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>