summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-01-28mb/asus/h61m-cs: Add ASUS H61M-CSdevmaster64
Working: - USB (Partially. Check "Not working") - PCIe - PCIe graphics - All SATA ports - Native memory init - On-board audio (back and front) - S3 (Sleep and wake) Not working: - Fan control - USB (If the keyboard has a USB Hub or if the keyboard is connected through 2 or more hubs then it doesn't initialize in time. A simple reboot allows the keyboard to be used in SeaBIOS and the bootloader) Untested: - PS/2 - On board graphics Change-Id: I4ed2077248a8d7123c728c790d9b81fe37956ed2 Signed-off-by: Abhinav Hardikar <realdevmaster64@gmail.com> Reviewed-on: https://review.coreboot.org/c/30767 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-28mb/google/octopus: Fix termination for unused dual voltage pinsShamile Khan
These pins should not have pull downs configured in standby state as that can cause contention on the termination circuitry and lead to incorrect behavior as per Doc# 572688 Gemini Lake Processor GPIOTermination Configuration. BUG=b:79982669 TEST=Checked that code compiles with changes. Change-Id: If3cadc000ec6fc56019ee3f57e556dc819d5e0a5 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/c/30823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-28mainboard/google/octopus/variants/casta: Decrease touchpad I2C CLK frequencySeunghwan Kim
ELAN touchpad supports up to 400KHz, so we need to limit its CLK frequency to 400HKz. BUG=b:123376618 BRANCH=octopus TEST=built and verified touchpad I2C clk frequency gets be lower than 400KHz Change-Id: If7a43fe20c7e5abdf23c8c36e34c072c371563bf Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/31085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-28mb/lenovo/thinkcentre_a58: Extend mb nameArthur Heymans
While branded as thinkcentre a58 this board can also be found as "L-IG41M". Change-Id: I06ed424138c46c6b2f29f15c7ea5c3648b26a8d3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-28mb/google/sarien: Using HID over I2C to enable Melf TouchScreenChris Zhou
Current Melfas touchscreen driver cannot unregister ifself when connecting without Melfas touchscreen or connecting with other devices. And Melfas touchscreen FW can use I2C and HID over I2C driver, so switch to using HID over I2C driver. BUG=b:122710830 BRANCH=master TEST=Verify touchscreen on sarien works with this change. Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Change-Id: If04a2904a0f72a6c8363ab2c9865926c71cb5186 Reviewed-on: https://review.coreboot.org/c/31062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-26mb/qemu-riscv: update to match current qemu versionPhilipp Hug
Boots again to payload not found on qemu. Change-Id: Ie107eb882cbaac5a5a06c1ff990e7b9364377640 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/c/30554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-25mb/lenovo/x131e: remove PMH7James Ye
This board does not have PMH7. Change-Id: I382958f012e5f4445efc76c7f36bbdf460c29be4 Signed-off-by: James Ye <jye836@gmail.com> Reviewed-on: https://review.coreboot.org/c/31065 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25soc/intel/denverton_ns: Enable ACPI using intelblockJulien Viard de Galbert
- Port the existing denverton tables to intelblock - Add C-States table for denverton Note: Removed code is functionally identical to corresponding common code. Tested-on: scaleway/tagada Change-Id: Iee061a258a7b1cbf0a69bcfbf36ec2c623e84399 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-25mb/google/octopus: Override emmc DLL values for AmptonKane Chen
New emmc DLL values for Ampton BUG=b:122307153 TEST=Boot to OS on 5 systems Change-Id: Iadd58d254f4bb384f483c2c3e5615f7569d5211c Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/31048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-01-25mb/google/sarien: Force power on after cr50 updateDuncan Laurie
By default this board is configured to not power up after an EC reset. However in the case of a cr50 firmware update that will reset the EC it will end up powered off. In order to have it stay powered up configure the board to power up. This will get reset to the configured default when it boots again. BUG=b:121380403 TEST=update cr50 firmware and reboot to ensure system boots and does not end up powered off. Change-Id: I85beae24b1bc56bb0813f1fd1305218f04b0c1c8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31058 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25mb/google/sarien: Increse BIOS region size to 28MBLijian Zhao
Increase BIOS region(SI_BIOS) from 16MB to 28MB to make more spaces for upcoming payloads. BUG=b:121169122 TEST=Build and boot up fine into OS on sarien and arcada platform. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I4b03e20a485cb819b468c00e68f1539e92731237 Reviewed-on: https://review.coreboot.org/c/31054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-25mb/google/kahlee/variants/aleena: Add support Synaptics touch padLucas Chen
Add support Synaptics touch pad for Aleena/Kasumi. BUG=b:122549449 BRANCH=master TEST= Check if synaptics touch pad working in ChromeOS. Change-Id: Icab1b312f1943b27037ef458044ce9e7172919ee Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31064 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25sb/intel/common: Show "Add gigabit ethernet firmware" only for boards that ↵Jan Tatje
need it Hide "Add gigabit ethernet firmware" option for boards that do not use GbE firmware in GbE section. The option is now hidden by default and can be reenabled on a per-board basis by selecting MAINBOARD_USES_IFD_GBE_REGION in the mainboards Kconfig. The following boards seem to use this: mb/roda/rv11 mb/ocp/wedge100s mb/ocp/monolake mb/lenovo/x230 mb/lenovo/x220 mb/lenovo/x201 mb/lenovo/x200 mb/lenovo/t530 mb/lenovo/t520 mb/lenovo/t430s mb/lenovo/t430 mb/lenovo/t420s mb/lenovo/t420 mb/lenovo/t400 mb/kontron/ktqm77 mb/intel/saddlebrook mb/intel/kblrvp mb/intel/dg43gt mb/intel/dcp847ske mb/intel/coffeelake_rvp mb/intel/camelbackmountain_fsp mb/hp/revolve_810_g1 mb/hp/folio_9470m mb/hp/compaq_8200_elite_sff mb/hp/8770w mb/hp/8470p mb/hp/8460p mb/hp/2760p mb/hp/2570p mb/google/sarien mb/facebook/watson mb/compulab/intense_pc mb/asus/maximus_iv_gene-z The boards were identified by looking at devicetree.cb, but this list is possibly still incomplete. Change-Id: Ibfb07902ad93fe5ff2bd4f869abcf6579f7b5a79 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/c/30790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-25mb/{kontron,supermicro}: Use pcidev_on_root()Elyes HAOUAS
Change-Id: I61b3e5c92830f02d61a108dadde25ff261099e57 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-24src/mb/asrock/../g41m-s3: Remove spurious devicesAngel Pons
This fixes errors regarding "PCI: Leftover static devices" Change-Id: Ie45fe6934df4a9dad4c8f6b1af665034853c4c5a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/31020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-24mb/*/*/devicetree.cb: Move the ioapic device under the LPC bridgeArthur Heymans
This fixes spurious lines "child IOAPIC: 02 not a PCI device" and IOAPIC as leftover device. Change-Id: Id8010c84c45f0859508e7564c0eaa501904b7043 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-24mb/google/sarien/variants: Set tcc offset valueSumeet Pawnikar
Set tcc offset value to 5 degree celsius for Sarien system. BRANCH=None BUG=b:122636962 TEST=Built and tested on Sarien system Change-Id: I06fbf6a0810028458bdd28d0d8a4e3b645f279ca Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/31037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2019-01-24mb/google/sarien: Fix recovery mode detectionDuncan Laurie
In order to support the physical recovery GPIO on sarien it needs to enable the option VBOOT_PHYSICAL_REC_SWITCH and set the GPIO number in the coreboot table appropriately so that depthcharge can correctly determine the GPIO number. The same is done for the write protect GPIO in this table. Additionally since we are reading a recovery request from H1 it needs to cache the result since H1 will only return true on the first request. All subsequent queries to H1 will not indicate recovery. Add a CAR global here to keep track of the state and only read it from H1 the first time. BUG=b:121380403 TEST=test_that DUT firmware_DevMode Change-Id: Ia816a2e285d3c2c3769b25fc5d20147abbc71421 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31043 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24mb/google/octopus/bobba: Add support to handle PEN_EJECT eventKarthikeyan Ramasubramanian
Enable gpio_keys driver for bobba and add required configuration in the device tree to handle the pen eject event. BRANCH=octopus BUG=b:117953118 TEST=Ensure that the system boots to ChromeOS. Ensure that the stylus tools open on pen eject. Ensure that the system wakes on Pen Eject. Ensure that the system enters S0ix and S3 states after the pen is ejected. Ensure that the system enters S0ix and S3 states when the pen remains inserted in its holder. Ensured that the system does not wake when the pen is inserted. Ensure that the suspend_stress_test runs successfully for 25 iterations with the pen placed in its holder. Change-Id: I768b89d2b45f4dcab6d235b11ce00544a827f22d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24mediatek/mt8183: Move some initialization into mt8183_early_initYou-Cheng Syu
MT8183 only allows booting from eMMC, so we have to do eMMC emulation from an external source, for example EC, which makes the size of bootblock very important. This CL adds a new function mt8183_early_init, which includes all initializations that should be done in early stages. All mainboards using MT8183 should manually call it in either bootblock or verstage. BRANCH=none BUG=b:120588396 TEST=manually boot into kernel Change-Id: I35d7ab875395da913b967ae1f7b72359be3e744a Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/31024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-24mb/google/hatch: Enable support for WWANMaulik V Vaghela
This patch enables relevant GPIOs to enable WWAN. WWAN also requires to enable USB 2 port 6 and USB3 port 5 which is already enabled in device tree related changes. BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I1559bbc6168aec1a369bf3291d2c1e2f9a2fbe07 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24mb/google/hatch: Enable PCIe WLAN and BTMaulik V Vaghela
Enable PCIe WLAN for hatch 1. Enable PCI port 14 for PCIe WLAN 2. Enable CLKREQ, CLK SRC 3 for PCI port 14 3. GPIO pad config for WLAN and BT USB port for BT has already been enabled so not included in this patch BUG=b:120914069 BRANCH=none TEST=check if code compiles correctly and verify GPIO configuration with schematics Change-Id: I4f2a6eb37a467ad8b8cdde8fe6b657fabb383b04 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-24Kconfig: Remove symbol names for choicesNico Huber
These are completely throwing Kconfig off, resulting in duplicate entries. Change-Id: I401467da686d5011a456b661a10170492a919c81 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-24cpu/intel/model_406dx: Remove the notion of CPU socketsArthur Heymans
Change-Id: I5e8fb2e7331d02224a4199c4d05f92c603c57f78 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31032 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24cpu/intel/model_206ax: Remove the notion of socketsArthur Heymans
With the memory controller the separate sockets becomes a useless distinction. They all used the same code anyway. UNTESTED: This also updates autoport. Change-Id: I044d434a5b8fca75db9eb193c7ffc60f3c78212b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31031 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24mb/ocp/wedge100s: Add SuperIO supportPatrick Rudolph
* Enable COM1, COM2, PMC1 and PMC2 TODO: Look at additional configuration and EC space. Tested on wedge100s. The serial works without CONFIG_CONSOLE_SERIAL. Change-Id: Id139bf243c7e7ac3e51a0ddb19d2396452341e29 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-23mb/google/sarien: Replace B0D4 with TCPUSumeet Pawnikar
Replace B0D4 with TCPU for DPTF thermal sensor. This helps to maintain consistency between coreboot and UEFI BIOS. Change-Id: I024068c19160e1c08badef3d304ada14455c045f Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/31028 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23mb/*/*/devicetree.cb: Make sandybridge devicetree uniformArthur Heymans
This is a merely cosmetic change. Change-Id: If36419fbee9628b591116604bf32fe00a4f08c17 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-23mb/intel/icelake_rvp: Enable dptf functionalitySumeet Pawnikar
Enable dptf functionality for IceLake based U and Y systems. Change-Id: I8ef396f9df8e39300d5870fd9a147ecdd6f0ba90 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/29686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-23mb/intel/glkrvp: Fix termination for dual voltage pinsShamile Khan
These pins should not have pull downs configured in standby state as that can cause contention on the termination circuitry and lead to incorrect behavior as per Doc# 572688 Gemini Lake Processor GPIO Termination Configuration. BUG=b:79982669 TEST=Checked that code compiles with changes. Change-Id: I8156c67df152555ecf9e7be9e4851468538bcff1 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/c/30867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: John Zhao <john.zhao@intel.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-23google/kukui: Revise FMAP layout for larger CBFSHung-Te Lin
Kukui with vboot enabled will build with `detachable_ui`, which needs larger space in CBFS for more complicated assets. So we need to revise FMAP sections: - BOOTBLOCK (not really used) only needs <= 32K. - GBB can be much smaller since assets moved from GBB to CBFS. - FMAP is re-ordered (with the cost of less efficient in bsearch) so CBFS can get larger continuous space. - COREBOOT(CBFS) should take all space left. Since FMAP and COREBOOT have changed location, the system will need to reflash EC (which contains the new bootblock) as well. BUG=b:123202015 TEST=Builds and boots on Kukui P1 Change-Id: I22cff99dca8c396c5897c3f6631721af40f3ffbd Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/31035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-23mb/google/poppy/variant/nami: disable unused usb2 portsRen Kuo
disable unused usb2 ports of bard and ekko skus BUG=120874946 TEST=build a test firmware and run lsusb to check usb ports Change-Id: I2ef3cd17ada8b65c96bc80675650905949f235e1 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30986 Reviewed-by: Vincent Wang <vwang@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23mb/google/arcada: Add settings for noise mitgationCasper Chang
Enable acoustic noise mitgation for arcada platform, the slow slew rates are fast time dived by 2. BUG=none BRANCH=none TEST=none Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: Ia838818a76a7f638b24146f3eb48493a4091c9cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/31034 Reviewed-on: https://review.coreboot.org/c/31034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-23mb/lenovo/x131e: add VBTJames Ye
VBT was extracted from VBIOS ROM. Tested with libgfxinit, booting SeaBIOS into Linux. Change-Id: Ibedb43852dc9b846850e1070b84f708c847b7dbf Signed-off-by: James Ye <jye836@gmail.com> Reviewed-on: https://review.coreboot.org/c/31003 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23nb/intel/pineview: Use parallel MP initArthur Heymans
Remove guards around CPU code on which all platforms use parallel MP init code. This removes the option to disable HT siblings. Tested on Foxconn D41S. Change-Id: I89f7d514d75fe933c3a8858da37004419189674b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25602 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23nb/intel/x4x: Use parallel MP initArthur Heymans
Use parallel MP init code to initialize all AP's. Also remove guards around CPU code where all platforms now use parallel MP init. This also removes the code required on lapic init path for model_6fx, model_1017x and model_f4x as all platforms now use the parallel MP code. Tested on Intel DG41WV, shaves off about 90ms on a quad core. Change-Id: Id5a2729f5bf6b525abad577e63d7953ae6640921 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25601 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23nb/intel/i945: Use parallel MP initArthur Heymans
Use the parallel mp init path to initialize AP's. This should result in a moderate speedup. Tested on Intel D945GCLF (1 core 2 threads), still boots fine and is 26ms faster compared to lapic_cpu_init. This removes the option to disable HT siblings. Change-Id: I955551b99e9cbc397f99c2a6bd355c6070390bcb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-01-23mediatek/mt8183: Add Micron 4GB LPDDR4X DDR supportHuayang Duan
BUG=b:80501386 BRANCH=none TEST=Boots correctly and stress test pass on Kukui. Change-Id: I985c5061ce4ed4d88a17619aa5cde7d0121dd3a3 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-23mb/purism/librem_skl: add 13v3 variantMatt DeVillier
The 13v3 is just a 13v2 with TPM added, so duplicate 13v2 config and change strings where needed. Leave MAINBOARD_PART_NUMBER unchanged since boards were initially shipped with 13v2 firmware, and changing it now would cause flashrom to throw a board mismatch error. Change-Id: I1a5e4c84cc9444bb9731b6dcc4de2ce7427dbbb1 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/31010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-23mb/purism/librem_skl: add support for 13v4/15v4 boardsMatt DeVillier
Add support for Kabylake Librem 13v4/15v4 boards, reusing existing 13v2/15v3 variants since board design unchanged (only SoC). Adjust identification strings, add Kabylake VGA PCI ID. Change-Id: Ia795b9c7373ea2e2acd3bef309320b58e9e8449d Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/31009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-23mb/purism/librem_skl: adjust CBFS_SIZEMatt DeVillier
Adjust default CBFS_SIZE to match that used in configs for building Change-Id: Ibe1312560a923dcdefb8af52a721ab76c0b08a2e Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/31008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-23mb/google/poppy/variants/nami: close the FP power in S5Ren Kuo
close the FP module power in power off (s5) BUG=122887366 BRANCH=Nami TEST= build test firmware and measure the fp power enable pin Change-Id: I80ddfbf1edf7c6435d263d5f5e0edb8b8701817d Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30910 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Vincent Wang <vwang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23mb/google/hatch: Enable SD card support for hatchMaulik V Vaghela
Enable support for SD card support for hatch 1. Enable PCI device for SD and also configure SD detect GPIO 2. Configure SD card related GPIOs in gpio.c BUG=b:120914069 BRANCH=none TEST=Verify GPIO configuration with schematics Change-Id: I8ccaa28323b1e1fcc192e245347a96309227660b Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-23mb/google/octopus: Override emmc DLL values for MeepKane Chen
New emmc DLL values for Meep. BUG=b:122308271 TEST=Boot to OS on 13 Meep system Change-Id: I4247114ed69ff3aa283f0f72d5531ad0f37309ad Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/31021 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-22mb/asus/kgpe-d16: Add BMC KCS to ACPITimothy Pearson
The BMC KCS interface must be advertised to the host OS in order for automatic load of the ipmi module to work. Expose the KCS interface via ACPI. Change-Id: Ia251334ae44668c2260d8d2e816f85f1f62faac7 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/c/19822 Reviewed-by: Piotr Kubaj <pkubaj@anongoth.pl> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-22mb/asus/kgpe-d16: Enable IPMI KCS accessTimothy Pearson
The on-board BMC contains a hardware KCS interface. Allow access to it over LPC. Change-Id: Ia251334ae44668c2260d8d2e816f85f1f62faac6 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/c/19821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-22Revert "UPSTREAM: mainboard/google/kahlee: Also configure GPIO_9 in RAM stage"Daniel Kurtz
This reverts commit 3278f859c3dd97a6d6d885a91dfd33d44e95d58b. Reason for revert: It turns out all we want to set in RAM stage is GPIO's DEBOUNCE config, not its SCI configuration. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> BUG=b:113880780 BRANCH=none TEST=Boot grunt, does not go to recovery screen Change-Id: I500934f3e03e66c97873accd4a979a23d4509675 Reviewed-on: https://review.coreboot.org/c/30997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2019-01-22mb/google/hatch: Remove MAINBOARD_USES_IFD_EC_REGION selectionSubrata Banik
hatch shouldn't make use of internal ec.bin through IFD tool. Change-Id: Ib1a324291b1c8ac90a7d790b63427b2e85c74fd1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/31022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-20mb/google/octopus/variants: Disable xHCI compliance mode for FleexAmanda Huang
Some usb devices exhibits signal loss which causes xHCI entering compliance mode. The resolution is to disable xHCI compliance mode. BRANCH=octopus BUG=b:120009029 TEST=Verified usb operation successfully. Change-Id: Ic7fa08c894397598dee3c4ff9a764e43383a0627 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-01-20mb/google/octopus/variants/meep: Disable xHCI compliance modeWisley Chen
Some usb devices exhibit signal loss which causes xHCI entering compliance mode. The resolution is to disable xHCI compliance mode. BUG=b:122671995 TEST=check "Disable Link Compliance Mode" bit of "SuperSpeed Port Link control" register and usb operation successfully. Change-Id: Ia2ae7e52391fadc8ed23b8b76c45d410757d22ec Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/30948 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-18mb/google/sarien/variants: Add Thermal Sensors informationSumeet Pawnikar
Add available thermal sensors information for CPU throttling action. BRANCH=None BUG=b:120058043 TEST=Built and tested on Arcada system Change-Id: I748ca0ce43915c96d71e63fb03fc3d1a02adc56c Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-18mb/google/sarien/variants/sarien: Adjust TP/TS/H1 I2C CLK to meet specDtrain Hsu
After adjustment on Sarien EVT TouchScreen: 380.7 KHz TouchPad: 379.3 KHz H1: 392.2 KHz BUG=b:122657195 BRANCH=master TEST=emerge-sarien coreboot chromeos-bootimage measure by scope Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I0dd92b054d934b38a17898dc8ce9cc18bda1633f Reviewed-on: https://review.coreboot.org/c/30949 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17mb/lenovo/x220: Add x1 as a variantBill XIE
ThinkPad X1 ( https://www.thinkwiki.org/wiki/Category:X1 ) is nearly a clone of X220, with additional USB3 controller on pci-e (as i7 variant of x220), and a powered ESATA port wired to ata4 (Linux' annotation). Documentation added. Tested: - CPU i5-2520M - Slotted DIMM 8GiB - Camera - Mini pci-e on wlan slot - Msata on wwan slot - On board SDHCI connected to pci-e - USB3 controller connected to pci-e - NVRAM options for North and South bridges - S3 - TPM1 on LPC - Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from SeaBIOS, or Linux payload (Heads) Not tested: - Fingerprint reader on USB2 - Onboard USB2 interfaces (wlan slot, wwan slot) Change-Id: Ibbc45f22c63b77ac95c188db825d0d7e2b03d2d1 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/c/29434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-17mb/kontron/986lcd-m: Implement disabling ethernet NIC in ramstageArthur Heymans
With the i82801gx code automatically disabling devices ethernet NICs attached to the southbridge PCIe ports can now be disabled during the ramstage. Change-Id: If4163f8101d37cc09c0b51b1be20bf8388ed2b89 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30245 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17mb/google/hatch: Configure miscellaneous featuresRonak Kanabar
set SaGv = SaGv_Enabled , To Enable System Agent dynamic frequency support set HeciEnabled = 1, To Enable heci communication set speed_shift_enable = 1 To Enable Speed Shift Technology support Change-Id: Iea90a65a77ef5e45a802cfe6fd31e1921163b02b Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/30774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-17src/mainboard/google/sarien: query recovery mode from Cr50Keith Short
On the Sarien/Arcada platforms, the EC is not trusted to provide the state of the ESC+REFRESH+PWR recovery combination. On these platforms the Cr50 latches the state of REFRESH+PWR for use as the recovery mode key combination. BUG=b:122715254 BRANCH=none TEST=Verify recovery mode screen shown after pressing REFRESH+PWR Change-Id: If336e9d7016987be151ab30d5c037ead3a998fe0 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/30937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-17hatch: Add sbmios_mainboard_sku functionShelley Chen
BUG=b:122578255 BRANCH=None TEST=mosys platform id/name/family Change-Id: I6288ea1a4e9f692b6e04440e61f59ea53f01ebec Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-17hatch: disable sw syncShelley Chen
Disabling software sync since EC patches haven't landed yet. BUG=b:120914069 BRANCH=None TEST=build bios image and make sure gbb flag 0x200 is set Change-Id: I1661bcd6ebbee6d9aa8068efcc18b259fb4c8203 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-16mb/google/sarien/variants/sarien: Set up tcc offset for sarienJohn Su
Change tcc offset from 15 to 3 for sarien. BUG=b:122636962 TEST=Match the result from TAT UI Change-Id: I1c5d144e92d1e6e9c81b3e6686805ccf744b7203 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30808 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16mainboard/google/kahlee: Also configure GPIO_9 in RAM stageDaniel Kurtz
The general rule is to configure GPIOs used by coreboot in bootblock (using the reset table), and GPIOs used by OS in RAM stage. However, GPIO_9 will be used as both, and we need to reconfigure it to properly set up debounce, however, it is no longer possible to change bootblock, so we also configure it in RAM stage to make the new debounce configuration take affect. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> BUG=b:113880780 BRANCH=none TEST=Reboot stress test grunt (>100 times); no messages in dmesg like: tpm tpm0: Timeout waiting for TPM ready Change-Id: I0f1bca176ed3f9cebf6b9e9e1008905e492a2f03 Reviewed-on: https://review.coreboot.org/c/30922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-16mb/google/kahlee/careena: Add 20ms delay to captureAkshu Agrawal
define wakeup-delay-ms to 20ms. This avoids the pop noise heard at the start of capture. BUG=b:119926436 TEST=with kernel patch https://lore.kernel.org/patchwork/patch/1029806/ no pop sound heard at start of capture Change-Id: I299a584ef2ba66d1e752515100cbe3919b2108f6 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/c/30726 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16mb/google/kahlee/liara: Add 20ms delay to captureAkshu Agrawal
define wakeup-delay-ms to 20ms. This avoids the pop noise heard at the start of capture. BUG=b:119926436 TEST=with kernel patch https://lore.kernel.org/patchwork/patch/1029806/ no pop sound heard at start of capture Change-Id: I2593afa69cfb955f6a2b695406855e0f31f28468 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/c/30725 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16mb/purism: Select NO_POST instead of overriding its dependenciesNico Huber
Declaring a Kconfig symbol ahead to override its default also always sets implicit dependencies. If the original symbol doesn't have any, Kconfig gets confused. Change-Id: Ie6d9ca96e4b6037eefd432dd386cb5e540deb0ed Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-16nb/intel/sandybridge: Remove the C native graphic initArthur Heymans
Libgfxinit provides a better alternative to the native C init. While libgfxinit mandates an ada compiler, we want to encourage use of it since it is in much better shape and is actually maintained. This way libgfxinit also gets build-tested by Jenkins. Change-Id: Ic6678d3455f1116e7e67a67b465a79df020b2399 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/27532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-16mainboard/intel: Update mainboard UART KconfigSubrata Banik
After a96e66a (soc/intel: Clean mess around UART_DEBUG) got merged, all mainboard using intel cannonlake,coffeelake, kabylake, skylake, icelake and whiskeylake get affected. Using INTEL_LPSS_UART_FOR_CONSOLE instead of UART_DEBUG and set default console for each platform. TEST=Intel client and IoT team has verified that LPSS uart is working fine on CNL, WHL and ICL RVPs. Change-Id: I0381a6616f03c74c98f837e3c008459fefd4818c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30913 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16mb/google/sarien: Enable Camarillo DeviceLijian Zhao
Whiskeylake processor have an internal device called Camarillo dedicated for thermal management support, turn it on so processor thermal driver can be loaded. BUG=N/A TEST=Boot up and run lspci on Sarien board, Bus 0 Device 4 Funcion 0 can be seen. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I937960fde2704cddb1fe0058ab622f4b5de401d7 Reviewed-on: https://review.coreboot.org/c/30858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-16src/mainboard/pcengines/apu1: Enable LPC TPMMichał Żygowski
PC Engines apu1 has a 20 pin LPC header that allows connection of external TPM module. Add necessary Kconfig option and devicetree entry for TPM. Change-Id: Ic9f3d41c6e8346a12553386b9c00de6b8fd21abd Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/30354 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16AGESA fam16kb boards: Clean up devicetreeKyösti Mälkki
Remove double nesting of chip northbridge/amd. There is requirement to keep SPD address map in the same chip block with device 0:18.2. Change-Id: Id3a161c54341d0c5c569ea6118ee6f890b7f62e6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30735 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16AGESA fam15tn boards: Clean up devicetreeKyösti Mälkki
Remove double nesting of chip northbridge/amd. There is requirement to keep SPD address map in the same chip block with device 0:18.2. Change-Id: I67fcb59a63046865f660e628a61c2944b0f89a74 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30734 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: mikeb mikeb <mikebdp2@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16AGESA fam14 boards: Clean up devicetreeKyösti Mälkki
Remove double nesting of chip northbridge/amd. There is requirement to keep SPD address map in the same chip block with device 0:18.2. Change-Id: Ib212f24c3d697a009d2ca8e2c77220de4bfb7573 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30733 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16mb/google/sarien: Set PL1 and PL2 valuesSumeet Pawnikar
Set PL1 and PL2 values to 25W and 51W respectively for processor power limits control. BRANCH=None BUG=b:122343940 TEST=Built and tested on Arcada system Change-Id: I4098f334ed5cb6c4a6f35f1a7b12809f34c23fa3 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-16mb/intel/kblrvp: Fix unsigned val casting of smaller sizePraveen hodagatta pranesh
Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: I519ed4b5b403622d6bb01ad0bdd04e01dedff7d8 Reviewed-on: https://review.coreboot.org/c/30794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-16mb/intel/kblrvp: Add new Kaby lake RVP11 supportPraveen hodagatta pranesh
The RVP11 is a dual-channel DDR4 SO-DIMM on skylake H platform. This patch add following chages - Add overridetree.cb for RVP11 - Select skylake PCH-H chipset config for RVP11. - Add GPIO table as per board schematics. - Add audio verb table for RVP11. - Set the UserBd UPD to BOARD_TYPE_DESKTOP. BUG=None TEST= Build and flash, confirm boot into yocto OS on KBL RVP11 platform. verified PCI, USB, ethernet, SATA, display, audio and power functionalities. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: Id86f56df06795601cc9d7830766e54396d218e00 Reviewed-on: https://review.coreboot.org/c/29809 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16buildsystem: Promote rules.h to default includeKyösti Mälkki
Does not fix 3rdparty/, *.S or *.ld or yet. Change-Id: I66b48013dd89540b35ab219d2b64bc13f5f19cda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/17656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-16siemens/mc_apl4: Change UART_FOR_CONSOLE indexMario Scheithauer
This mainboard uses SOC internal UART 1 instead of UART 2 like all other mc_apl1 mainboards. Change-Id: Ib986962ed068fee019ffcec0391d43d5ab178458 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/30933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-16mb/google/sarien: Set Vref Config to 2Lijian Zhao
Accoding to desciption in FSP header, Vref Configuration will be set to 2 if VREF_CA to CH_A and VREF_DQ_B to CH_B. BUG=N/A TEST=Build and boot up on Arcada platform. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I02e16e141b81d766a6060ca08283f432abd96647 Reviewed-on: https://review.coreboot.org/c/30280 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-15mb/google/atlas: Enable camera module NVMChen, JasonX Z
Enable at24 EEPROM by adding ASL of nvm BUG=b:122583978 BRANCH=master TEST=Build and run for basic camera functions Change-Id: Ifc2060c2ceb7d1a8ef490f36f484deb425a37c95 Signed-off-by: Chen, JasonX Z <jasonx.z.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/30795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-15mb/*/*: Use libgfxinit on sandy and ivy bridge boardsArthur Heymans
Change-Id: I41ad1ce06d9afcc99941affa232fa76ffa6631fb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/27531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-15mainboard/ocp/wedge100s: Fix uartPatrick Rudolph
* Route IO 0x6e/0x6f to LPC bus * Setup ITE8526 in early_mainboard_romstage_entry * Fix romstage serial console by disabling internal uart default setting * Unselect CONFIG_INTEGRATED_UART, as it doesn't use internal UARTs * Select CONFIG_DRIVERS_UART_8250IO, as it has a SuperIO serial * Configure UPDs related to serial Change-Id: I59cd83ed43dbf4ee26685e4a573de153291f7074 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-14[RFC]util/checklist: Remove this functionalityArthur Heymans
It was only hooked up for galileo board when using the obsolete FSP1.1. I don't see how it can be useful... Change-Id: Ifd7cbd664cfa3b729a11c885134fd9b5de62a96c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30691 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14Revert "mb/google/kalista: Disable EC-EFS"Patrick Georgi
This reverts commit 4e3cd744492c7a3d80bca55a35276efeada731e5. Reason for revert: Daisuke says "We'll keep EFS on Kalista/Karma enabled" Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I2f11ffc9dd7eb05a2560261bbf472e8488c274d9 Reviewed-on: https://review.coreboot.org/c/30857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14console: Change BOOTBLOCK_CONSOLE default to `y`Nico Huber
Invert the default instead of selecting it everywhere. Restores the ability to use its Kconfig prompt. Beside Qemu targets, the only platforms that didn't select it seem to be samsung/exynos5420, intel/cannonlake, and intel/icelake. The latter two were about to be patched anyway. Change-Id: I7c5b671b7dddb5c6535c97c2cbb5f5053909dc64 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30891 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14mb/asus/p5qpl-am: Add p5g41t-m_lx as a variantAngel Pons
This board has more or less the same as the p5qpl-am except for DDR3 memory and different colors on the ports. Tested with Arch Linux with kernel 4.20.0-arch1-1-ARCH. What is tested and works: - 800/1066/1333 MHz CPUs and DDR3 sticks at 800/1066 MHz Some bugs are still present in the DDR3 raminit code though. - Ethernet - Internal programmer with both coreboot and stock firmware. - PCI and PCIe x1 slots - All USB ports - S3 resume - SATA ports - PEG - Rear audio output Change-Id: I92cd15a245c4f1d8f57b304c9c3a37ba29c35431 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/27089 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14/src/mb/google/poppy/variants/atlas: Revise SPK resetGaggery Tsai
This patch revises the pad reset config of speaker reset GPIO pin from RSMRST to PLTRST. Audio engineer suggested to reset the amps with warm reset. BUG=b:122441567 BRANCH=None TEST=warm & cold reset & suspend_stress_test -c 10 and ensure the speakers are working well. Change-Id: I87c554b186b068da93e1662a97afaf01dddae0ef Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/30866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-14mb/intel/coffeelake_rvp: Update mainboard UART KconfigWonkyu Kim
Update mainboard UART Kconfig for Whiskylake RVP. TEST=Build and test on Whiskylake RVP. By default we can still get console from cbmem, and enable CONSOLE_SERIAL can get logs from UART port2. Select other Coffeelake RVPs and check CONSOLE_SERIAL is enabled. Change-Id: Ic56c019a12b467e5bede5648098d3fb82b56ba7e Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-on: https://review.coreboot.org/c/30861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-14nb/intel/pineview: Move the boilerplate mainboard_romstage_entryArthur Heymans
The mainboard_romstage_entry function is mostly boilerplate, so move it to a common location and provide mainboard specific callbacks. Change-Id: I33cf1d6a60d272f490f41205ec725dee8b00242b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14mb/google/octopus/variants: Configure PLT_RST_L pad IOSSTATE maskedJohn Zhao
PLT_RST_L was asserted twice at boot-up and a glitch was observed when coming out of suspend mode. Configure PLT_RST_L pad IOSSTATE from HIZCRx1 to be masked. BRANCH=octopus BUG=b:117302959 TEST=Verified no glitch on PLT_RST_L at S3 and PLT_RST_L stays high 3.3v during S0ix. Change-Id: I8c23aadda72be54fb45e67aab2bc8ed51e473bae Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30815 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14mb/google/octopus/variants: Disable xHCI compliance modeJohn Zhao
Some usb devices exhibits signal loss which causes xHCI entering compliance mode. The resolution is to disable xHCI compliance mode. BRANCH=octopus BUG=b:115699781 TEST=Verified usb operation successfully. Change-Id: I41fecaa43f4b1588a0e4bbfc465d595feb54dd24 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30817 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14mb/google/hatch: Use USB2 Port 10 for BT over CnViAamir Bohra
Integrated BT controller in CnVi uses USB port 10 for communication. BUG=b:122552619 TEST=lsusb shows BT device Change-Id: Iad1ca0e9419b534f50a3ce3fdcbd660caf8efb5c Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30809 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14mb/lenovo/[xtz]60: Introduce and use RCBA64 macroPeter Lemenkov
Change-Id: I85ca631dfb01acb92dd1ac38dff07215114cab8c Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/30802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-14mb/lenovo/*/romstage: Use macros instead of magic numbersPeter Lemenkov
Apparently coreboot still uses magic numbers instead of macros in some Lenovo mainboards. Let's use macros instead. Note that IOTR[0123] is a 64-bit width variable. Change-Id: Icf185c77ede5a258fe37be9e772be6804d014b57 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-14sb/intel: Use common RCBA MACROsPeter Lemenkov
This commit follows up on commit 2e464cf3 with Change-Id I61fb3b01ff15ba2da2ee938addfa630c282c9870. Change-Id: Iaf06d347e2da5680816b17f49523ac1a687798ba Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: David Guckian Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-14soc/intel/fsp_broadwell_de: Move early_mainboard_romstage_entry()Patrick Rudolph
Move early_mainboard_romstage_entry before console_init. Allows to setup a SuperIO, if any, for serial console. Change-Id: I370263a6197a4c0c805352f07fedddbee1b8e247 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14AGESA binaryPI: Consolidate ACPI for IMCKyösti Mälkki
Change-Id: Ieff6041f3c9ad02f9cebae0ec83d0898abb0d601 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/18538 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14AGESA binaryPI: Remove unused IMC ACPI methods IMSP and IMWKKyösti Mälkki
Note that IMC must sleep while SPI writes are in progress. Instead of using these ACPI methods, flashrom currently does raw IO to achieve the same. Change-Id: Ifca4e8328c54d1074b4799ddecfece24607214db Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/18537 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14binaryPI: Remove ACPI for IMC we don't runKyösti Mälkki
IMC is used on some of the AMD reference designs, so do not touch them yet. Change-Id: I6a58ab53d4a800d4c0c2026e50826122ece2c59f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/21190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-01-14AGESA: Remove ACPI for IMC we don't runKyösti Mälkki
IMC is used on some of the AMD reference designs, so do not touch them yet. Change-Id: Iae21e0294f0155f07fb4f4348ebc5b3120d50fd1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/18536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-14AGESA/PI: replace HUDSON_DISABLE_IMC with HUDSON_IMC_ENABLEMike Banon
Only a few boards are using IMC for the onboard fan control, so regarding the availability of IMC selection it should be opt-in, not opt-out. Also, select HUDSON_IMC_ENABLE for Gizmo 2 because Gizmo 2 could use IMC for the onboard fan control. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I3590b13c3b155405d61e373daf1bd82ca8e3bd16 Reviewed-on: https://review.coreboot.org/c/30756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-13google/butterfly: correct northbridge selectionMatt DeVillier
butterfly is a Sandybridge device, and selecting Ivybridge breaks libgfxinit currently due to CPU mismatch Test: build/boot butterfly w/libgfxinit Change-Id: I1a7f5a3681d21a256834b11b545855c4365f5f78 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30820 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13google/butterfly: add cpu/gpu pwm backlight register valuesMatt DeVillier
Required for functional internal display on butterfly using libgfxinit. Test: boot/build butterfly, verify internal display functional prior to OS driver loading. Change-Id: Ib8060f2d1ad0694f0886d35c83763907f61b47b1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30819 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 10:43:45 +0000