summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Expand)Author
2011-06-04Port persimmon r6594 to e350m1: Cosmetic cleanupPeter Stuge
2011-06-04Port persimmon r6593 to e350m1: Remove unused Kconfig optionsPeter Stuge
2011-06-04Port persimmon r6592 to e350m1: Update GPP port configurationPeter Stuge
2011-06-04Port persimmon r6591 to e350m1: ROM cache earlyMarshall Buschman
2011-06-04Port persimmon r6590 to e350m1: Work around memory allocation problemMarshall Buschman
2011-06-04Port persimmon r6589 to e350m1: Strip down AGESA optionsMarshall Buschman
2011-06-04Port persimmon r6588 to e350m1: VGA framebufferMarshall Buschman
2011-06-04Port persimmon r6587 to e350m1: RTC is not PIIX4 compatibleMarshall Buschman
2011-06-04Port persimmon r6586 to e350m1: FADT revisionMarshall Buschman
2011-06-04Port persimmon r6584 and r6601 to e350m1: SPI prefetch earlyMarshall Buschman
2011-06-04Port persimmon r6583 to e350m1: pstate 0 earlyMarshall Buschman
2011-06-04Port persimmon r6582 to e350m1: 33 MHz SPI read earlyMarshall Buschman
2011-06-04Port persimmon r6578 and r6596 to e350m1: MMCONF basePeter Stuge
2011-06-04Port persimmon r6574 to e350m1: MMCONF sizeMarshall Buschman
2011-06-04Port persimmon r6573 to e350m1: VGA, PCI MMIO and SB800 legacyMarshall Buschman
2011-06-04Port persimmon r6572 to e350m1: I/O APIC IDMarshall Buschman
2011-06-03advansus/a785e-i mainboard enable warning as errorKerry She
2011-05-23AP_IN_SIPI_WAIT is already defined in the CPU Kconfig of those boards.Stefan Reinauer
2011-05-20Correct amd persimmon romstage code for early SPI prefetch enable.Scott Duplichan
2011-05-20Move the ACPI FACP table to the front of the RSDT list. This is done to work ...Scott Duplichan
2011-05-15Remove multiple mmconf settings and just use kconfig setting.Marc Jones
2011-05-15Cosmetic cleanup.Scott Duplichan
2011-05-151) Remove unused kconfig options.Scott Duplichan
2011-05-15Update gpp port configuration.Scott Duplichan
2011-05-15Enable rom cache early to reduce boot time.Scott Duplichan
2011-05-15Fix memory allocation problem in amdInitLate. Disabled until further debug.Scott Duplichan
2011-05-15Remove some non-essential agesa options to reduce boot time.Scott Duplichan
2011-05-15Declare legacy video frame buffer so that Windows generic VGA driver will work.Scott Duplichan
2011-05-15Declare RTC as not PIIX4 compatible to match AMD hardware.Scott Duplichan
2011-05-15Make fadt revision match its length. Solves Windows 7 checked build assert.Scott Duplichan
2011-05-15Enable SPI cacheline prefetch early to reduce boot time.Scott Duplichan
2011-05-15Enable SPI cacheline prefetch early to reduce boot time.Scott Duplichan
2011-05-15Switch processor cores to pstate 0 early to reduce boot time.Scott Duplichan
2011-05-15Enable 33 MHz fast mode SPI read early to reduce boot time.Scott Duplichan
2011-05-15Move mmconf base from e0000000 to f8000000 to avoid conflict with UMA BAR.Scott Duplichan
2011-05-15Match DIMM SPD addressing to implemented slots.Scott Duplichan
2011-05-15Size mmconf according to CONFIG_MMCONF_BUS_NUMBER.Scott Duplichan
2011-05-151) Use D18F1xF4 VGA Enable to simplify legacy video I/O support.Scott Duplichan
2011-05-151) Set I/O APIC ID according to BKDG recommendationScott Duplichan
2011-05-13siemens/sitemp_g1p1: Adapt read_option() to latest changesJosef Kellermann
2011-05-12Remove uart_init() in Siemens sitemp-g1p1Patrick Georgi
2011-05-11Add Siemens SITEMP-G1 boardJosef Kellermann
2011-05-10Change read_option() to a macro that wraps some API uglynessPatrick Georgi
2011-05-07ADVANSUS A785E-I Mainboard support, Family10h ASB2, RS880(RS785E) + SB820 pla...Kerry She
2011-04-28Thinkpad: Enable Battery eventsSven Schnelle
2011-04-27X60: enable Ultrabay if device is plugged inSven Schnelle
2011-04-27T60: enable Ultrabay if device is plugged inSven Schnelle
2011-04-22The UART divider should be calculated based on the base frequencyStefan Reinauer
2011-04-21some ifdef --> if fixesStefan Reinauer
2011-04-20run uart_init() from console_init, just like the other console initialization...Stefan Reinauer
2011-04-20Add Lenovo ThinkPad T60Sven Schnelle
2011-04-20pci1x2x: remove latency/bridge control/cacheline size settingsSven Schnelle
2011-04-20pci1x2x: use pci_ops set_subsystem instead of custom codeSven Schnelle
2011-04-20pci1x2x: use devicetree register configurationSven Schnelle
2011-04-19Drop baud rate init to an arbitrary baud rate from Super I/O code. ...Stefan Reinauer
2011-04-18* Set USBDEBUG_DEFAULT_PORT in all southbridges and use that valueStefan Reinauer
2011-04-15fix mainboards that were including earlymtrr.c without actually using it.Stefan Reinauer
2011-04-11Unify use of post_codeAlexandru Gagniuc
2011-04-11PMH7: Add chip configSven Schnelle
2011-04-11EC: Add Lenovo H8Sven Schnelle
2011-04-10In 2007 Adrian Reber suggested that we drop ASSEMBLY in favor of __ASSEMBLER__.Stefan Reinauer
2011-04-05X60: use pnp_write_config() instead of custom functionSven Schnelle
2011-04-05X60: move ec version info code to log_ec_version()Sven Schnelle
2011-04-04X60: assert audio mute before entering SuspendSven Schnelle
2011-04-04X60: log firmware versionSven Schnelle
2011-04-04X60: blink suspend LED during resumeSven Schnelle
2011-04-04X60: we have ACPI_RESUMESven Schnelle
2011-04-04X60: deassert audio mute on bootSven Schnelle
2011-04-01remove swp files accidently addedSven Schnelle
2011-04-01X60: add dock code for Ultrabase X6Sven Schnelle
2011-04-01ICH7: Fix register naming errorSven Schnelle
2011-03-28Add support for Supermicro H8scm.Zheng Bao
2011-03-28SP5100's code is based on SB700. Change the legacy sb700 of sb7xx_51xx.Zheng Bao
2011-03-21X60: Add notification for LID objectsSven Schnelle
2011-03-21X60: remove beep call from _Q26/_Q27Sven Schnelle
2011-03-15X60: Clear EC events when wake GPE is triggeredSven Schnelle
2011-03-14X60: LPC bus is LPCB, not LPCSven Schnelle
2011-03-14X60: fix typo in dsdt.aslSven Schnelle
2011-03-14X60: Add _PRW/_PSW methods to LID/SLPB objectsSven Schnelle
2011-03-08Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the expect...Scott Duplichan
2011-03-07X60: add thermal zone 1Sven Schnelle
2011-03-07X60: add thermal zone 0Sven Schnelle
2011-03-04Redo r6099 after copy&pasted code reintroduced DIMMx #definesPatrick Georgi
2011-03-03Configure PCIe lanes on ms7135 as original BIOS does.jakllsch
2011-03-01Fix some subsystemid statements in r6421Sylvain "ythier" Hitier
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
2011-02-28Kino devicetree.cb SIO PNP devices were not matched up with theMarc Jones
2011-02-26Make AMD Fam10h CPU microcode updates optional in Expert modeXavi Drudis Ferran
2011-02-26Following patch fills in the callbacks for PCIe x16 resets. This board uses G...Rudolf Marek
2011-02-26Correct error in ASRock E350M1 commit that breaks build for ASRock 939a785gmh.Scott Duplichan
2011-02-26Add support for the ASRock E350M1, an AMD family 14h Fusion board.Scott Duplichan
2011-02-24Tyan/s2735 doesn't need to define its own hard_reset function anymore.Patrick Georgi
2011-02-24git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6376 2b7e53f0-3cfb-0310-b3e...Scott Duplichan
2011-02-21[i945] Add SPD adress mappingSven Schnelle
2011-02-16Add ACPI code for Lenvo X60Sven Schnelle
2011-02-16Lenovo ThinkPad X60: Enable SMI handlerSven Schnelle
2011-02-15Remove more files and lines mistakenly copied from Roda to X60Peter Stuge
2011-02-15Remove ACPI mistakenly copied from Roda to ThinkPad X60Peter Stuge
2011-02-15Remove Inagua Kconfig items for external VGA and AHCI binaries. These can be ...Marc Jones
2011-02-14Lenovo ThinkPad X60 / X60s SupportSven Schnelle
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 00:38:33 +0000