summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-08-21mainboard/google/poppy: Update VR config settingsFurquan Shaikh
Update Psi2Threshold, IccMax, ACLoadline and DCLoadline VR config settings to match that of soraka. BUG=b:62063434 BRANCH=None TEST=Build and boot poppy. Change-Id: I2c294eb14257d319e1e2d4d1e529481d921ba6f8 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21105 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-08-21mainboard/google/poppy: Remove MPS IMPV8 workaroundFurquan Shaikh
Poppy uses MPS2949 IMVP8 controller and does not need the VR workaround similar to Eve. Change-Id: If6fb1890e024e1488d278bbe0a71a1a63ee321af Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21104 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-08-20mb/gigabyte/ga-b75m-d3v: add libgfxinit supportBill XIE
On this device libgfxinit successfully initializes textmode and framebuffer mode on the device connected to the HDMI1 port. VGA port is not tested, due to lack of VGA with valid EDID. Every ports works on GNU/Linux with kernel version 4.9+80+deb9u1. Due to limitations within the libgfxinit's current build system, it needs "select NORTHBRIDGE_INTEL_IVYBRIDGE" to work, even it is PCH instead of CPU for which libgfxinit should be configured here. Change-Id: Ib1513fc57b79eebc5d047c2e24585731c44bc215 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-18drivers/i2c/rx6110sa: Drop I2C interface arbitrationNico Huber
Change-Id: Ib31e77eec639c231520198c0b978d6c3c1eadaed Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18mainboard/hp: Add HP Elitebook 8460pIru Cai
The code is based on autoport. I'm using a machine with discrete GPU, and gfx.* in devicetree.cb is from 2760p. It can be debug with serial port on dock. Tested: - CPU and memory: i5-2540M, 4G+0 - Arch Linux (Linux 4.11.7, SeaBIOS payload, with ATOM BIOS extracted from vendor UEFI firmware) - USB ports - SD card reader - WLAN - DP display - S3 Change-Id: I9c42723ba240a2e9b46998c1a8a708aebc66c604 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 2570pIru Cai
The code is based on autoport. The EHCI debug port is the upper USB port beside the battery. Tested and working: - CPU and memory: i7-3720QM, 4G+4G - Linux Mint with Linux 4.4 (SeaBIOS payload) - All USB ports - ExpressCard - WLAN - AC and battery status - S3 - Other devices detected: DVD drive, smartcard reader, fingerprint, bluetooth Not tested: - VGA and DP - Ethernet and modem - Dock Change-Id: I9f3cd124fc676d49add59e9f0a07f70a6bb0fff0 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 8470pIru Cai
The code is based on the code generated by autoport. The EHCI debug port is between the DP port and eSATA port. The serial port on dock can also be used for debugging. The model with discrete graphics is not tested. Tested and work: - memory: 0+4G, 4G+0, 4G+4G - Linux (Arch Linux with kernel 4.10.6) boot from SeaBIOS payload with native graphics init - WLAN - keyboard, trackpoint and touchpad - USB - serial port on dock - fan control - AC and battery status (EC) blobs: This laptop uses SMSC KBC1126 EC, and there are two blobs needed by it. You can use the tools in util/kbc1126/ to extract them and insert them to the coreboot image using the following configuration: -> Chipset -> Add firmware images for KBC1126 firmware Change-Id: Icbc051e2272b8ea73627940db15a56901d737472 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/18985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 2760pIru Cai
The code is generated by autoport. The flash chip is socketed beside the WLAN slot. The EHCI debug port is on right side of the laptop beside the RJ11 connector. Things that work: - memory: 0+8G, 4G+8G - Linux (Linux Mint 18.1 with Linux 4.4) - native graphics init + SeaBIOS payload with SeaVGABIOS - all 3 USB ports - WLAN - WWAN - SD card reader - expresscard - S3 suspend and resume - internal flashing after IFD is unlocked and coreboot is flashed - keyboard, trackpoint and touchpad - fan control - AC and battery status Issues: - Wacom digitizer does not work (even after I add it in DSDT) - GRUB payload will freeze (in all Elitebooks, including chainloading GRUB from SeaBIOS) Things that are not tested: - smart card reader - cable modem (EC) blobs: This laptop uses SMSC KBC1126-NU as EC. It needs two blobs in the flash chip. You can use the tools in util/kbc1126 to extract them from OEM firmware, and use the following configuration to insert them to coreboot image: -> Chipset -> Add firmware images for KBC1126 firmware Change-Id: I3ffdb9f9c71f6c9a84e896abc3c424c8dd4bed0e Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/18241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-17mainboard/google/poppy: Add ACPI objects for NVMEM device GT24C16S and CAT24C16V Sowmya
The Giantec semiconductor GT24C16S and ON semiconductor CAT24C16 are the industrial standard electrically erasable programmable read only memory (EEPROM's) and this patch adds ACPI objects and power resources for NVMEM device. Update DOVD method to set sensor IO LDO voltage and remove repetitive code from OVFI, VCMP and NVMP power resources. BUG=b:38326541 BRANCH=none TEST=Build and boot soraka. Dump and verify that the generated DSDT table has the required entries. Read the NVMEM content via sysfs interface. Change-Id: If49ed33b7e1de1eabf317b31ceed8568dfca0aae Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-17mainboard/google/coral: Add keyboard backlight supportSheng-Liang Pan
BUG=b:64705535 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage and verify the keyboard backlight can be bright and alt+f6, alt+f7 function keys can be used. Change-Id: I777247a6b58d3d50b72f12ca2fcab49a06ed5431 Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com> Reviewed-on: https://review.coreboot.org/21027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-16AGESA f14: Sacrifice ACPI S3 support for EARLY_CBMEM_INITKyösti Mälkki
A decision has been made that boards with LATE_CBMEM_INIT will be dropped from coreboot master starting with next release scheduled for October 2017. As existing implementation of CAR teardown in AGESA can only do either EARLY_CBMEM_INIT or ACPI S3 support, choose the former. ACPI S3 support may be brought back at a later date for these platforms but that requires fair amount of work fixing the MTRR issues causing low-memory corruptions. Change-Id: I5d21cf6cbe02ded67566d37651c2062b436739a3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-15440BX boards: Use combined RAM init routineKeith Hui
Change all 440BX boards to use the combined RAM init routine added in commit 078e3240 (northbridge/intel/i440bx: Merge RAM init routines) [1]. [1] https://review.coreboot.org/20676 Change-Id: I699db882189f99018d4a6fdcb00f9438b2a7a1bc Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-15440BX boards: Drop more unused #includes from romstageKeith Hui
Romstages of many 440BX boards included headers that are redundant. Remove them as part of a bigger cleanup effort. This finishes off what began in https://review.coreboot.org/20693. Change-Id: I102a4f6e492eb607b7f88d4c6e15072a8b7fdc46 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-15google/coral: Fetch SKU ID from ECPatrick Georgi
BUG=b:64468585 BRANCH=none TEST=with the other sku-id related patches applied, coreboot obtains the right SKU ID from EC Change-Id: I96a0e030bbc5f1c98165e70353340c413f8dc352 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-15soc/intel/common/block: Add LPC Common code and use it for APLRavi Sarawadi
Add LPC common code to be shared across Intel platforms. Also add LPC library functions to be shared across platforms. Use common LPC code for Apollo Lake soc. Update existing Apollolake mainboard variants {google,intel,siemens} to use new common LPC header file. Change-Id: I6ac2e9c195b9ecda97415890cc615f4efb04a27a Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-14stoneyridge: Rename hudson to southbridgeMarc Jones
Simplify funciton names and remove reference to hudson in stoneyridge. The southbridge in Stoney Ridge is Kern and hudson naming is no longer accurate. BUG=b:62200157 BRANCH=none TEST=Build and booted on Kahlee. Change-Id: Ide7a72dae69b881997101f1e37a1ac739901744d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20912 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-11mb/google/poppy: Update PL2 settingsSumeet Pawnikar
Update PL2 override setting to 15W as per KBL Power Arch Guide. Change-Id: I4a6f875f8c3bdb012d6ff97c1429f32db5210893 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/20943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-10nb/intel/sandybridge/raminit: Add Kconfig option for fusesPatrick Rudolph
Add a new Kconfig option to ignore memory fuses that limit the maximum DRAM frequency to be used. The option is disabled by default and should only enabled by experienced users as it might decrease system stability or prevent a successful RAM training. Remove conflicting devicetree settings. Change-Id: I35dd78a02bcaafce8ba522d253c795d7835bacae Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nicola Corna <nicola@corna.info>
2017-08-10mb/lenovo/t*00/romstage: Switch to new hybrid driverPatrick Rudolph
Get rid of old hybrid graphics driver and use the new one. 1. Disable IGD and PEG in early romstage. The PEG port will get disabled on devices that do not have a discrete GPU. The power savings are around ~1Watt. The disabled IGD does no longer waste GFX stolen memory. 2. Get rid of PCI driver The Nvidia GPU can be handled by the generic PCI driver and allows to use the ACPI _ROM generator for Switchable graphics. 3. Settings are stored in devicetree. One driver for all Lenovo hybrid graphics capable devices. 4. Add support for Thinker1 GPU power handling. Only boards that do use reference design 2012 are known to be supported. Needs test on boards that do you use reference design 2013. Should reduce idle power consumption when using IGD by ~5Watt. Tested on Lenovo T430 without DGPU. PEG port is disabled. Needs test on all devices. Change-Id: Ibf18b75e8afe2568de8498b39a608dac8db3ba73 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-10mb/lenovo/t400: Switch to new hybrid graphics driverPatrick Rudolph
Use new hybrid graphics driver to get device state. Move remaining code to romstage.c. Tested on Lenovo T500: * Linux 4.11.4 on Fedora 25 * Integrated (using NGI) * Discrete (using VGA OpROM) * Switchable (using NGI and VGA OpROM), tested with DRI_PRIME No regressions found. Change-Id: Iad2eccaab19c71f11308853ba9326d8186e67c93 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-10mb/intel/dg43gt: Add mainboardArthur Heymans
This mainboard features is an G43 northbridge, ICH10 southbridge and Winbond W83627dhg SuperI/O. This board is impossible to flash internally with vendor bios (BIOS region is WP and other regions like IFD and ME are read only and inaccessible respectively). Due to either ICH10 or board layout it is also impossible to do ISP, which requires desoldering flash chip. To make hacking more easy there is an empty SPI header next to spi flash pads which can be hooked up to a SPI flash. What works: * 2 DDR2 dimms per channel (tested with 1+2G in CH0 and 2+2G in CH1); * SATA with AHCI * Integrated GPU with option rom (extracted from a Gigabyte vendor bios) * VGA (on DVI) with NGI if patched to use DVI gmbus port for output * PCI * Reboot and S3 resume * Descriptor mode with ME disable straps and ME region absent (no working gbe in this configuration though) * USB. What does not work: * GBE (probably requires working ME); * Analog on DVI port out is shaking, which is not the case with vendor BIOS (setting clockgen on smbus 0x69 like vendor fixes it). * Booting with ME enabled (needs raminit patches for that) Not tested: * Sound; * All the rest. Not coreboot related problems: * Flashing this board with vendor bios is a PITA and requires desoldering flash chip; * In situ programming is not possible. TESTED with SeaBIOS and Linux 4.10.8 Change-Id: If27280feb7cbf0a88f19fe6a63b1f6dbcf9b60f4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-10google/kahlee: Set eMMC slotMarc Jones
Set AGESA SD/eMMc variable to non-removable eMMc. BUG=b:63891719 BRANCH=none TEST=Boot eMMC on Kahlee. Change-Id: I76ed9cec36a9688ebe75db2077f1ece4ab750c16 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20911 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-09intel/common/block/smm: Update smihandler to handle gpiBrandon Breitenstein
Updating the common smihandler to handler gpi events which originally were going to be left to each soc to handle. After some more analysis the gpi handler can also be commonized. Change-Id: I6273fe846587137938bbcffa3a92736b91982574 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/20917 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-09mb/lenovo/x1_carbon_gen1: add missing '+' in spd/MakefileAlexander Couzens
Each line of spd config overwriting the slot 0 instead of appending it. Change-Id: I0124aa34f1d4fcb30810fb7eef03d4828a7ac430 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Tested-on: lenovo x1 carbon gen 1 with elpida 8GB Fixes: e9787ff61f81 ("mb/lenovo/x1_carbon_gen1: Add 4GiB SPD index 2") Reviewed-on: https://review.coreboot.org/20918 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-08mb/lenovo/x1_carbon_gen1: Add 4GiB SPD index 2Nico Huber
Change-Id: I218fd48c8e29563ef089d60ebde7bc36ac8ab189 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-08-08mb/lenovo/l520/Kconfig: Remove hybrid graphics driver supportPatrick Rudolph
The schematics isn't available for the board, but other L*00 series boards seem to use a different, compared to T*00 series, GPIO layout. As it has never been tested, remove the broken driver. Change-Id: I4bfa02fdbc5da5b556010c2f300faaf6dc845b80 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-08mb/intel/d510mo: Configure clockgenArthur Heymans
Configuring the clockgen like vendor bios fixes the issue where the display wobbles from left to right on the analog VGA output. Note: This seems to be common issue/requirement on Intel devices from that generation (also happens on dg43gt). TESTED on Intel D510MO. Change-Id: I08449f0b8b90a1781e6dec91140bf219ea07aaf9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19595 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-06rockchip: gpio: add gpio_pull argument in gpio_input_irq() functionLin Huang
some gpio irq need to set input pull initialization status to guarantee to get the right irq trigger. let's add this argument in gpio_input_irq() function BRANCH=None BUG=None TEST=boot from bob Change-Id: I9b8e6497f07146dafdb447a6ea10d039a2a2fa33 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-04mainboard/google/poppy: Decrease link-frequencies for OV13858 and OV5670V Sowmya
Decrease the link-frequencies as recommended by Omnivision for OV13858 and OV5670 camera sensors. BUG=b:38326541 BRANCH=none TEST=Build and boot soraka. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successful. Change-Id: I78fb2d3527f66b5147123a9c8fc4cb95650f86b6 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
2017-08-04mainboard/google/soraka: Configure GPP_B8 in bootblockFurquan Shaikh
GPP_B8 acts as input to the inverter whose output controls PERST# signal to wifi module. Out of reset, GPP_B8 is configured as input by default. Since there is no external pull-down on it, this line is floating and results in PERST# being asserted until ramstage where the GPIO was originally configured. Because of this the wifi chip is not ready during the PCIe initialization step. Move the configuration of GPP_B8 to bootblock so that wifi device is taken out of reset as early as possible. BUG=b:64181150,b:62726961 TEST=Verified with warm reboot and suspend-resume stress test that wifi is still functional. Change-Id: I68e1bd67499262a17daade72e9a9fd32934a184d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-04mainboard/google/soraka: Add gpio.c to bootblockFurquan Shaikh
Add gpio.c to bootblock so that the variant early_gpio_table can be used for configuration in bootblock. BUG=b:64181150,b:62726961 Change-Id: I77181334257f2fd19982ecafc1f58afe912f4280 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-04google/kahlee: Add ChromeOS SMBIOS Board IDMarc Jones
Kahlee uses 3 GPIO(144, 140, 135) pins to identify the board revision. Change-Id: Ia9693db6d6506af7ff40db0b3ce4cc6c1469f6ef Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-04soc/amd/stoneyridge: Use generic gpio libraryMarc Jones
Use the genric GPIO library. Add the required functions. Also, update the Kahlee mainboard dependency to match. Change-Id: I2ea562b052401efff3101f736788ca77d21e6de6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20543 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-03google/kahlee: Add Realtek audio codec ASLIvy Jian
Add the RT5650 codec ASL for proper Linux driver loading. Devices visible to OS: /sys/bus/acpi/devices/AMDI1002:00 /sys/bus/acpi/devices/I2SC1002:00 Change-Id: I60b256f68372c9d17d67c9cb2accaca616a0b9a5 Signed-off-by: Ivy Jian <ivy_jian@compal.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02binaryPI: Introduce BINARYPI_LEGACY_WRAPPER and its counterpartKyösti Mälkki
We define BINARYPI_LEGACY_WRAPPER a method of calling AGESA via functions in agesawrapper.c file. The approach implemented there makes it very inconvenient to do board-specific customisation or present common platform-specific features. Seems like it also causes assertion errors on AGESA side. The flag is applied here to all boards and then individually removed one at a time, as things get tested. New method is not to call AGESA internal functions directly, but via the dispatcher. AGESA call parameters are routed to hooks in both platform and board -directories, to allow for easy capture or modification as needed. For each AGESA dispatcher call made, eventlog entries are replayed to the console log. Also relocations of AGESA heap that took place are recorded. New method is expected to be compatible with binaryPI. Change-Id: I2900249e60f21a13dc231f4a8a04835e090109d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA: Introduce AGESA_LEGACY_WRAPPER and its counterpartKyösti Mälkki
We define AGESA_LEGACY_WRAPPER a method of calling AGESA via functions in agesawrapper.c file. The approach implemented there makes it very inconvenient to do board-specific customisation or present common platform-specific features. Seems like it also causes assertion errors on AGESA side. The flag is applied here to all boards and then individually removed one at a time, as things get tested. New method is not to call AGESA internal functions directly, but via the dispatcher. AGESA call parameters are routed to hooks in both platform and board -directories, to allow for easy capture or modification as needed. For each AGESA dispatcher call made, eventlog entries are replayed to the console log. Also relocations of AGESA heap that took place are recorded. New method is expected to be compatible with binaryPI. Change-Id: Iac3d7f8b0354e9f02c2625576f36fe06b05eb4ce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-01google/gru: Correct Scarlet pwm regulator minimum value and maximum valueLin Huang
In Scarlet pwm regulatoror minimum value and maximum value differs from other board variants, Correct it so we can get the right voltage. Change-Id: I1f722eabb697b3438d9f4aa29c205b0161eb442a Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-01google/gru: Correct the Sdcard control gpio setting for ScarletLin Huang
in Scarlet the Sdcard control gpio differs from other board variants, So set the GPIO to high on Scarlet. Change-Id: I5fa19b212a716213462eea58b6242392d32a2c5c Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-01google/gru: Use 1.8V powerdomain for gpio4cd on ScarletLin Huang
Scarlet gpio4cd use 1.8V powerdomain, let's make a correct register setting, otherwise even the uart does not work. Change-Id: Ib5a8b2a4d92502fb829688d0a3e1b645d53cd7fc Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-07-31google/kahlee: Add mainboard GPIOs to ACPIMarc Jones
Add the Google mainboard GPIOs to the ACPI table. Change-Id: I9b5952ed3934b938cb50650890a7b434e6306fd1 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Fix CTRL+U USB bootMarc Jones
The EC KBC controller was not initialized, so the EC wouldn't put keys in the output buffer. With nothing in the buffer, vboot didn't try to boot the USB stick. Add the driver to setup the KBC called by EC init. BUG=b:62066405 BRANCH=none TEST=Boot Kahlee with USB stick and CTRL+U boots the stick. Change-Id: If9346fda558e802536c7de38da5b21fd25320e40 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20480 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-31google/kahlee: Move mainboard_ec_init to chip init phaseMarc Jones
Move mainboard_ec_init out of mainboard enable to the more appropriate mainboard init phase. Change-Id: Ieabcecf70e4de0b42fc639d031755b6d0b66f08a Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31soc/amd/stoneyridge: Move ACPI MADT table to socMarc Jones
Move the mainboard MADT tables to generic soc ACPI code. Change-Id: I49fb55b1315da8fe65421b43fc4312ed588d5ecb Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20277 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-31google/kahlee: Add EC and GNVS ACPIMarc Jones
Add ACPI support for the Google EC, which requires GNVS support for passing information from the EC to firmware and OS. Change-Id: I0a308bcd608a135cc9633273a05527f020b60743 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/20276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Enable TPMMarc Jones
Set up the TPM decode to SPI prior to verstage. Enable LPC TPM and remove the mock data. Note, Kahlee TPM is on SPI, but decoded by the LPC block. BRANCH=none BUG=b:62103024 TEST=coreboot and Depthcharge reports TPM found. Change-Id: Iab92259ebeaa40937309fad05cc45d9ca6d41357 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Save VBNV data to CMOSMarc Jones
Store VBOOT NV data in CMOS. This allows VBOOT to save flags and data to be used in multiple stages and depthcharge. Fixes developer mode USB boot. Change-Id: I50b45e687a1a1c71838bcc390212b28d7e634a19 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Set DDI port 2 to DPMarshall Dawson
Set DDI port 2 type to Display Port. Change-Id: Idc5e57e01d4f0073ac50533c1b04a95bcae67473 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Setup the I2S audio codecMarshall Dawson
Inform AGESA to setup an I2S codec instead of an Azalia codec. This is step one for audio to work. ASL to connect the driver and the hardware is in a follow-on patch. Change-Id: I7ece5d8c317ddc76e0e6b2a005256bc384fe51e2 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/19841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-30intel/sandybridge: Clean VGA BIOS ids up a littleNico Huber
Sync map_oprom_vendev() and autoport with the list of PCI ids in the `gma.c` driver, remove one obsolete Kconfig default override. Change-Id: I12f24f415b695c516fbb947114e09c873af2e439 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-07-30intel/sandybridge: Gather MMCONF_BASE_ADDRESS defaultsNico Huber
All affected boards did the same USE_NATIVE_RAMINIT distinction or actually selected USE_NATIVE_RAMINIT. Also update autoport. Change-Id: I924c43cec1e36e84db40e4b8e1dd0e05cad2b978 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20813 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-07-28google/kahlee: Add ASL for Elan touchpadIvy Jian
Add ASL for the Elan touchpad driver connection in ChromeOS. This is based on the Auron and Rambi ASL. The AMD ACPI code doesn't have the auto table generation the newer Intel Chrome SOC use. Device visible to OS: /sys/bus/acpi/devices/ELAN0000 Change-Id: Id3fc8c8855b0296f43a502e81143498d663468ec Signed-off-by: Ivy Jian <ivy_jian@compal.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28google/kahlee: Fix ASL whitespace and formattingMarc Jones
Clean up the ASL whitespace and formatting to match the iasl -d style as other parts of coreboot. Change-Id: I61689cb55dc26cbad160d45aa0a36c00b386fe0c Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28google/kahlee: Remove conflicting AAHB IRQ ASLIvy Jian
The AMD internal A-link (AAHB device) doesn't support an IRQ, so remove it. This solves a conflict with the GPIO IRQ required for touchpad operation. Change-Id: Iefaf33cfb2babc29d35b5372fc3a338a72c78a4a Signed-off-by: Ivy Jian <ivy_jian@compal.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28mb/google/soraka: configure GPP_B8 to control WLAN_PE_RSTRizwan Qureshi
WLAN_PE_RST control was moved from EC to SoC, it connected to GPP_B8. Configure GPP_B8 to drive low. TEST=Wifi card is detected and connect to an AP. Change-Id: I6a6ea0ddefe8402284fe37665864c7a1961cbc15 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/20804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-27google/kahlee: Set SERIRQ to continuous modeMarc Jones
The Kahlee Nuvoton EC firmware doesn't support SERIRQ quiet mode, yet. Set continuous mode until the quiet mode feature is available. This allows keyboard and other EC based interrupts through. Change-Id: If77c91fde2bd0f4da85413879fefb753ae6297de Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19840 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Pass GPIO setting in amdinitenvMarshall Dawson
GPIOs for I2C3 were being unset in amdinitmid if the GPIO enable table wasn't passed. It had been initialy set in amdinitreset. Pull the GPIO settings into their own file that can be used in bootblock and later stages. Change-Id: I41cd7873f8c8543c95ad8653e0a3887f7d0487a2 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Update PCIe link/lane configurationMarshall Dawson
Enable: GPP0 x1 - WLan GPP1 x1 - Card Reader Change-Id: Idbfc2a3260b85949810bdd8dc904e59f8a779e48 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Set FADT legacy and 8042 supportedMarc Jones
The EC is a legacy 8042 device. Don't set LEGACY_FREE and correctly report in the FADT. Change-Id: I041ea4b44372178f3d6073b6ebc8003abc097703 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19836 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27google/kahlee: Add ChromeOS and ChromeECMarshall Dawson
Add the basics for building as a ChromeOS device. ChromeOS and ChromeEC are dependent on each other, so bring them in together. The EC is a Nuvoton and you can find additional details in the Chromium EC repo. Add the Google HWID "Kahlee TEST 6421". The chromeos.fmd for Kahlee takes advantage of the AGESA located outside cbfs and includes typical RW, VPD, and MRC areas. There are some updates required to depthcharge, vboot, GPIOs, and the ChromeEC before we have a complete-ish system. Change-Id: Ifb0a6afc01dd80ef9e7bb81039d9152936043999 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Update GPIO tableMarshall Dawson
Update GPIO settings based on the schematic. Change-Id: Ic8a876198a3ba9029d1aabb273418923e40bfcc6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-27google/kahlee: Update for single DIMMMarshall Dawson
Update for a single DIMM with an SPD at address A0. Change-Id: I646f079c99cbaffd7094773243600c3030308325 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19833 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27google/kahlee: Remove AMD IMCMarshall Dawson
Kahlee does not use the AMD IMC. Remove the files and calls. Change-Id: Ia837551b592b4f473eb38c06c516586fb6c95c88 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19832 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27google/kahlee: Update KconfigMarc Jones
Update for the Stoney Ridge FT4 package and the on chip UART. Change-Id: I11468834a9ef03da084c156c74d55a19416d98c4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19831 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27google/kahlee: Start Kahlee mainboardMarc Jones
Copied from amd/gardenia. Update the appropriate board name strings. Uses the soc/ structure. Change-Id: Ia68b16969518f4d63d5d2dea7658a472b2daca05 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27soc/amd/common: Convert to C_ENVIRONMENT_BOOTBLOCKMarshall Dawson
Add dedicated CAR setup and teardown functions and Kconfig options to force their inclusion into the build. The .S files are mostly duplicated code from the old cache_as_ram.inc file. The .S files use global proc names in anticipation for use with the Kconfig symbols C_ENVIRONMENT_BOOTBLOCK and POSTCAR_STAGE. Move the mainboard romstage functionality into the soc directory and change the function name to be compatible with the call from assembly_entry.S. Drop the BIST check like other devices. Move InitReset and InitEarly to bootblock. These AGESA entry points set some default settings, and release/recapture the AP cores. There are currently some early dependencies on InitReset. Future work should include: * Pull the necessary functionality from InitReset into bootblock * Move InitReset and InitEarly to car_stage_entry() and out of bootblock - Add a mechanism for the BSP to give the APs an address to call and skip most of bootblock and verstage (when available) (1) - Reunify BiosCallOuts.c and OemCustomize.c (1) During the InitReset call, the BSP enables the APs by setting core enable bits in F18F0x1DC and APs begin fetching/executing from the reset vector. The BSP waits for all APs to also reach InitReset, where they enter an endless loop. The BSP sends a command to them to execute a HLT instruction and the BSP eventually returns from InitReset. The goal would be to preserve this process but prevent APs from rerunning early code. Change-Id: I811c7ef875b980874f3c4b1f234f969ae5618c44 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-27siemens/mc_apl1: Select skip RAPL configurationMario Scheithauer
The mc_apl1 mainboard needs to disable the RAPL algorithm for a constant power management of the processor package. An active RAPL algorithm leads to negative effects with our real time software. Change-Id: I09ca56a034fd3896a000e64cac35f12fb507a682 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27mainboard/google/poppy: Configure GPIO.1 and GPIO.2 for daisy chain modeV Sowmya
Configure GPIO.1 and GPIO.2 as sensor SDA and SCL respectively for TPS68470 PMIC in daisy chain mode. * GPIO.1: Sensor SDA in daisy chain mode. * GPIO.2: Sensor SCL in daisy chain mode. BUG=b:38326541 BRANCH=none TEST=Build and boot soraka. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successful. Change-Id: I7f9686427772a33c06e4cdaafee9b0349d700639 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-27mb/google/kblrvp: Add camera devices power sequencing through ACPI power ↵V Sowmya
resources This patch controls the camera devices power through ACPI power resource. * Add Opregions for PMIC1 and PMIC2, * TI_PMIC_POWER_OPREGION * TI_PMIC_VR_VAL_OPREGION * TI_PMIC_CLK_OPREGION * TI_PMIC_CLK_FREQ_OPREGION * Add power resources for sensors and VCM, * OVTH for CAM0 * OVFI for CAM1 * VCMP for VCM * Implement _ON and _OFF methods for sensor and VCM module's power on and power off sequences. BUG=none BRANCH=none TEST=Build and boot kblrvp. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successful. Change-Id: I02c4784ab3f4d6e1f0e657ad50b727ff11da8b9c Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-27mb/google/kblrvp: Configure ports and endpoints for sensor and CIO2 devicesV Sowmya
Bind the camera sensor and CIO2 devices through the ports and endpoints configuration available in _DSD ACPI object. * Port represents an interface in a device. * Endpoint represents a connection to that interface. BUG=none BRANCH=none TEST=Build and boot kblrvp. Dump and verify that the generated DSDT table has the required entries. Change-Id: If328864dbb61586a4887c7fcae740a12eda7cc92 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-27mainboard/intel/kblrvp: Add MIPI camera supportV Sowmya
This patch adds mipi_camera.asl and enables I2C2, I2C3, CIO2 and IMGU devices, * Add TPS68470 PMIC1 and PMIC2 related ACPI objects. * Add OV cameras related ACPI objects. * Add Dongwoon AF DAC related ACPI objects. * SSDB: Sensor specific database for camera sensor. * CAMD: ACPI object to specify the camera device type. KBLRVP has two PMIC's sitting on I2C2 and I2C3. CAM0 and CAM1 power requirements are handled by PMIC1 and PMIC2 respectively. BUG=none BRANCH=none TEST=Build and boot kblrvp. Dump and verify that the generated DSDT table has the required entries. Change-Id: Ibaf26dad74ca1e7c9f415ae75c4ed8558ad99e2f Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-26intel/cannonlake_rvp: Split RVP boards and SPDLijian Zhao
Add both Cannonlake U DDR4 RVP and Cannonlake Y LPDDR4 RVP support. Implement SPD entry to FSPM for both platforms, seperated platform specific DQ/DQS/Rcomp input to FSPM as well. Change-Id: If71662353ddba89a9e831503a2d80dd5ebd65de3 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-26mainboard/intel/glkrvp: configure RAPL PL1 for GLKCole Nelson
Sets RAPL PL1 power to ~6W. Note: 7.5W setting gives a run-time 6W actual measured power. Tested on GLK w/kernel 4.11.0 by reading MSR 0x610 at runtime and comparing to measured power on an instrumented board. Change-Id: I07caeb2895a579387025d3b0fb7f1d2c3d5e2665 Signed-off-by: Cole Nelson <colex.nelson@intel.com> Reviewed-on: https://review.coreboot.org/19746 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-26mainboard/intel/glkrvp: Add support for GLKRVPHannah Williams
GLKRVP is a reference board for GLK SOC RVP1 has DDR4 and RVP2 has LPDDR4 RVP2 is enabled by default and CONFIG_IS_GLK_RVP_1 should be selected if building for RVP1 GLKRVP can work with internal Intel EC or external Chrome EC AIC. For internal EC, CONFIG_EC_GOOGLE_CHROMEEC will not be selected ( CONFIG_GLK_INTEL_EC should be selected for internal EC config) By default, CONFIG_GLK_CHROME_EC is selected for external ChromeEC AIC config. Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: Iab688aca6a4f5c5e32801215ba3a1a440e50fbef Reviewed-on: https://review.coreboot.org/19604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-25amd/gardenia: Correct PCIe port settingsMarshall Dawson
Fix the OEM settings for two ports. Fix and clarify comments to reflect Rev. B of the board design. Change-Id: I2812ea5945f67229872e78041c771606047bbbec Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20744 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-25amd/gardenia: Fix IS_ENABLED for fan controlMarshall Dawson
Convert from #if to if(). Change-Id: I50b3ed9ecd5947ff625536b196d90ebd4e8f1c56 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-25amd/gardenia: Fix IS_ENABLED for xHCIMarshall Dawson
Convert from #if to if(). Change-Id: I7c149856da22b72d2a83bd7f06d031df328dbb35 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-24google/reef: Configure EN_PP3300_DX_LTE on coralPatrick Georgi
BUG=b:63876329 BRANCH=none TEST=none Change-Id: I98c700d5b928c031129cf0138d22652a28d1ad1d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-24google/reef: copy gpio.c for coralPatrick Georgi
It requires changes to match the hardware. Except for the weak attributes that are now removed in coral's copy, the file is identical to the baseboard version. BUG=b:63876329 BRANCH=none TEST=none Change-Id: Ib0c5f0ecae9919f20631dacef0253416989fb011 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-24mb/lenovo/t430: Disable `usb_always_on` by default in CMOSPatrick Rudolph
Fix regression introduced by commit 7ffb329f. The default value for usb_always_on is no longer sane and is replaced by the same default that is used on all other boards (disabled). Change-Id: Ia8854a8491bc56507d01e08e1ca1e195a1d62bfc Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-24Update files with no newline at the endMartin Roth
Change-Id: I8febb8d74e2463622cab0313c543ceebec71fdf4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-24Fix files with multiple newlines at the end.Martin Roth
Change-Id: Iaab26033e947cb9cf299faf1ce6d40a90a9facbe Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20704 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-24mainboard/google/soraka: pull high TOUCHSCREEN_STOP_L pinWisley Chen
After updating to Wacom Firmware version 501, touchscreen can't work. Wacom FW (ver. 501) enables STOP function. STOP Pin: High: Normal Operation Low: Stop Scanning So pull TOUCHSCREEN_STOP_L high BUG=b:37007801, b:37265219 BRANCH=none TEST=manual testing on Soraka board and touchscreen works at boot and after suspend/resume. Change-Id: I8a2bdce1554fd99dea30cf91fa48d0529f40b7b0 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/20664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-23asus/p2b-d: Use romstage from asus/p2b-ds.Keith Hui
The romstage for both is line-for-line identical. Merge both into P2B-DS so it benefits from my modernization efforts. Change-Id: Idd964f4c5c4dfd9e2e0ac4a4f41e4ee9a84a729c Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-23asus/p2b-f: Use romstage from asus/p2b-ls.Keith Hui
The romstage for both is line-for-line identical. Merge both into P2B-LS so it benefits from my modernization efforts. Change-Id: I2d1a46236f83a4955ceb5e98b576cce0560f28df Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-23440BX boards: Drop unused #includes from romstageKeith Hui
Romstage of many 440BX boards included headers that are not used. Remove them as part of a bigger cleanup effort. Change-Id: I89ddeda3c90e1a4907c05851185b69f3b29e54ba Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-23asus/p2b-ls: Drop onboard LAN from devicetree.cbKeith Hui
I am able to complete a board-status run over onboard ethernet (ie. it works) without this entry, so it's not necessary. Change-Id: Iabdf1a1ff3c904bea1b7b5eaefb1d23831dd2cb9 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-23mainboard/google/{poppy,soraka}: Enable S0ixRajat Jain
Enable S0ix for poppy and soraka in their device trees respectively. BUG=b:36630881 BRANCH=none TEST=Verified S0ix and S3 operation on Poppy and Soraka (250+ iterations). Change-Id: I9ba91499e54f729970448af6f71804ad5b3cb836 Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-22mainboard/google/poppy/variants/soraka: Update GPP_{D1,D2,B7} configFurquan Shaikh
GPP_B7, GPP_D1 and GPP_D2 are not used going forward. Mark them as NC in gpio table. BUG=b:62322846,b:62240755 Change-Id: I7aee08314e6ce96d5913ae315bf75f5c04ab7370 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20672 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-22mainboard/google/poppy/variants/soraka: Define separate gpio tablesFurquan Shaikh
Now that soraka is starting to deviate from the baseboard w.r.t. gpio settings, make a new copy of gpio table before we make any variant-specific changes in it. BUG=b:62240755,b:62322846 BRANCH=None TEST=Verified with gpio_debug=1 in skylake/gpio.c that the gpio configuration before and after this change remains same. Change-Id: I448d18f18b63e9bfb739c518d599de3b9b602dc2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-20siemens/mc_apl1: Activate ECC for DRAMMario Scheithauer
This mainboard is equipped with DDR3L modules which support ECC. The BWG says that for activating ECC the FSP-M parameter MemoryDown must be set to 5. Change-Id: Idc68df1e2bae2396c9b9788d4a026a75b7d9119b Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-07-20siemens/mc_apl1: Include platform.aslMario Scheithauer
The OS of this mainboard needs the _PIC method for the selection of the type of interrupt routing. Change-Id: Ic82ba1b368aff0030422d9602ebc882247a2191b Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20618 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-07-19mainboard/intel/cannonlake_rvp: Add initial board filesAndrey Petrov
Initial board files needed to selected to build cannonlake rvp. Change-Id: I82bd5c785e451f02b827765c54d432517afd7de0 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-19google/gru: Add support for Scarlet rev1Julius Werner
This patch adds the necessary changes to support Scarlet revision 1. Since the differences to revision 0 are so deep, we have decided not to continue support for it in the same image. Therefore, this patch will break Scarlet rev0. All the deviations from other Gru boards are currently guarded by CONFIG_BOARD_GOOGLE_SCARLET. This should be changed later if we introduce more variants based on the newer Scarlet board design. Change-Id: I7a7cc11d9387ac1d856663326e35cfa5371e0af2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/20587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Schneider <dnschneid@chromium.org>
2017-07-19rockchip/rk3399: Adjust gpio_t format to match ARM TFJulius Werner
Our structure packing for Rockchip's gpio_t was chosen arbitrarily. ARM Trusted Firmware has since become a thing and chosen a slightly different way to represent GPIOs in a 32-bit word. Let's align our format to them so we don't need to remember to convert the values every time we pass them through. CQ-DEPEND=CL:572228 Change-Id: I9ce33da28ee8a34d2d944bee010d8bfc06fe879b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/20586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-19google/snappy: Add keyboard backlight supportKevin Chiu
BUG=none BRANCH=reef TEST=emerge-snappy coreboot chromeos-bootimage and verify the keyboard backlight can be bright and alt+f6, alt+f7 function keys can be used. Change-Id: I6d06f72e1ccc66292b4e5f867314d84c309af885 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/20633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-18vboot: Remove get_sw_write_protect_state callbackJulius Werner
We've just decided to remove the only known use of the VBSD_SW_WP flag in vboot (https://chromium-review.googlesource.com/c/575389), since it was unused and never reliable on all platforms anyway. Therefore, we can now also remove the coreboot infrastructure that supported it. It doesn't really hurt anyone, but removing it saves a small bit of effort for future platforms. Change-Id: I6706eba2761a73482e03f3bf46343cf1d84f154b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/20628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-18siemens/mc_apl1: Disable SDCARDMario Scheithauer
SDCARD is not used on this mainboard. Change-Id: I28d23cdb3652bf736b19daf67c7057c396230e24 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-18sb/amd/cs5536: Remove includes of C filesMartin Roth
The romstage for CS5536 platforms were including early_smbus.c and early_setup.c. Build these into romstage from the makefile, and remove the #includes. Add a Kconfig option for platforms that do not use the early smbus code. Change-Id: I2e6a9cd859292b4dd4720b547d1ff0bbb6c319cf Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-17binaryPI: Drop unused agesawrapper includeKyösti Mälkki
Change-Id: I67c682f79834bed334f26a4c7473eaf463262a85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>