summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2014-12-16i2c: Replace the i2c API.Gabe Black
The new API is in use in depthcharge and is based around the "i2c_transfer" function instead of i2c_read and i2c_write. The new function takes an array of i2c_seg structures which represent each portion of the transfer after a start bit and before the stop bit. If there's more than one segment, they're seperated by repeated starts. Some wrapper functions have also been added which make certain common operations easy. These include reading or writing a byte from a register or reading or writing a blob of raw data. The i2c device drivers generally use these wrappers but can call the i2c_transfer function directly if the need something different. The tegra i2c driver was very similar to the one in depthcharge and was simple to convert. The Exynos 5250 and 5420 drivers were ported from depthcharge and replace the ones in coreboot. The Exynos 5420 driver was ported from the high speed portion of the one in coreboot and was straightforward to port back. The low speed portion and the Exynos 5250 drivers had been transplanted from U-Boot and were replaced with the depthcharge implementation. BUG=None TEST=Built and booted on nyan with and without EFS. Built and booted on, pit and daisy. BRANCH=None Original-Change-Id: I1e98c3fa2560be25444ab3d0394bb214b9d56e93 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193561 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 00c423fb2c06c69d580ee3ec0a3892ebf164a5fe) This cherry-pick required additional changes to the following: src/cpu/allwinner/a10/twi.c src/drivers/xpowers/axp209/axp209.c Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I691959c66308eeeec219b1bec463b8b365a246d7 Reviewed-on: http://review.coreboot.org/7751 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-15tegra124: Setup clock PLLD by approximating display panel pixel clock.Hung-Te Lin
PLLD, the clock for display, was previously hard-coded to 306MHz. To support more different panels, we should calcualte PLLD by panel pixel clock configuration. Note existing pixel clock configurations for nyan* boards won't work (they used to rely on hard-coded approximated values) so the device trees are also modified. BRANCH=none BUG=chrome-os-partner:25933 TEST=emerge-nyan_big coreboot chromeos-bootimage See panel correctly initialized and got DEV screen. Original-Change-Id: I8d592f0cc044e7c4e4803c45955642e791210ad3 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193565 (cherry picked from commit 4f9b793633ebb2d104b0544e3b72fa0d105951c4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib2cabbad60af010e872505e888eab485ba8c2916 Reviewed-on: http://review.coreboot.org/7762 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan*: pinmux: fix PWM1/2 conflictsTom Warren
GPIO_PU4/PH1 and _PU5/PH2 were set to use the same PWM1/2 SFIO. Even though no problems were caused by this, correct it here so we get a conflict-free pinmux map. BUG=chrome-os-partner:27091 BRANCH=none TEST=Built and booted on Nyan, ran TegraShell "pinmux check" and saw no conflicts. Original-Change-Id: Ib16341aa0c92b9a078d7f3254d4151e9592f40b0 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194582 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit e06a5a62d381f803dd6574787795a51ce1f1fe74) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I055359dc80c0c878ba5f5faac17884a5506a826c Reviewed-on: http://review.coreboot.org/7759 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15tegra124: set safe values for href_to_sync and vref_to_syncJimmy Zhang
href_to_sync and vref_to_sync are chip specific settings. Currently they are set to 1/2 of hfront_porch and vfront_porch respectively. However, to support EDID (CL192730), per David Ung, the safe values for both are 1 (the same settings as in kernel). BUG=none BRANCH=none TEST=built and booted on nyan. Original-Change-Id: Ifb8898e720a160ba044e2b526de2a4d17bc63672 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193504 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit a7128a533ba6083ddfeeca3ba0828962cc2c8ab6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6954a5b49c798ebdffb20e3ebc9099cd17591b79 Reviewed-on: http://review.coreboot.org/7758 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan: Enable the cbmem console on nyan and allocate space for it in SRAM.Gabe Black
This change takes about 8K of space away from the cbfs cache and repurposes it for the cbmem console buffer. This is a little more than twice the space we currently need for the bootblock and ROM stage to give us some room to grow and for extra debug output if needed. BUG=None TEST=Built and booted on nyan. Checked the cbmem output. BRANCH=None Original-Change-Id: I6543bf5efddcf2377528a273f846b8090cd8be55 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193169 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 32e9ea6f9ecaa9b5441c91acab96514222f3af2c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia9e5cc7a4b561bd89137cdc8b594584b272d9fab Reviewed-on: http://review.coreboot.org/7757 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyans: prepare for vboot verification of ramstageAaron Durbin
Set the appropriate config options and make the appropriate calls to perform vboot verification. The flashmap offset as well as the TPM information needs to be properly set. Lastly, call into vboot_verify_firmware() to perform the vboot verification when it is enabled. BUG=chrome-os-partner:27094 BRANCH=None TEST=Built vboot verification on nyan. Original-Change-Id: I6113badd6143008ceb2b80f0ec0832e1addd03d7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/190928 Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 8c6c48c7823738bf9b029a467b077d2ee20d04e5) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2a442b1b0fff55e737df2e96740c05c1726502d5 Reviewed-on: http://review.coreboot.org/7743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15blaze: Change RAMCODE 0010 to hynix-2GB-792MHzNeil Chen
RAM module for RAMCODE 0010 (K4B4G1646Q) does not work with hynix-2GB-204MHz configuration. We need to replace it by hynix-2GB-792MHz. Also updated hynix-2GB-792MHz configuration from Nyan board folder. This commit is only for bring up stage. Once finish dram stress test, will update it again. BRANCH=none BUG=chrome-os-partner:27682 TEST=emerge-nyan_blaze coreboot builds OK; flash to blaze board and boot to kernel successfully Original-Change-Id: Idfc503c944ac6120c92a4cf329f3fbe63b2c2a1c Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193737 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 91f21aa0cf9251b825e42d946d8cd41849c57447) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6293fa638c5b2577e502ba34a3cc6e6d5b7f2fdb Reviewed-on: http://review.coreboot.org/7742 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan*: Fix unexpected symbol (CR) when converting DOS-formatted BCT config.Neil Chen
There are some unexpected symbol at the end of each line in the generated .inc file when the config file is in DOS format (CR+LF). Modify cfg2inc to support DOS format cfg file by removing carriage return symbols from the end of each line. BUG=chrome-os-partner:27614 TEST=sudo cfg2inc.sh XXX.cfg # make a expected inc file BRANCH=nyan Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Change-Id: I68b0f4b3805fcb5a6b633653c95afbafcb880a93 Original-Reviewed-on: https://chromium-review.googlesource.com/192697 Original-Tested-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Neil Chen <neilc@nvidia.com> (cherry picked from commit 38e90ab0d9110d3ede39c70e27961b833813a7d4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I30737600fa8ac12a45ad0fbc6086a624993794e7 Reviewed-on: http://review.coreboot.org/7741 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-15blaze: set 8 default BCT as hynix-2GB-204MHzNeil Chen
To set the 8 different BCT as hynix-2GB-204 first. Once the corresponding BCT release from AE, change it. BRANCH=none BUG=None TEST=emerge-nyan_blaze coreboot builds OK Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Change-Id: Ia42a4a5b85c561421ab8ae9aaf21c46a3c0a3513 Original-Reviewed-on: https://chromium-review.googlesource.com/191682 Original-Tested-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-by: Artiste Hsu <chhsu@nvidia.com> Original-Reviewed-by: Katie Roberts-Hoffman <katierh@chromium.org> Original-Commit-Queue: Neil Chen <neilc@nvidia.com> (cherry picked from commit 27792db4a90ae00e066bb0b88968cf5f187edb1d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia648c8bdbbbc82bbc8508bead6ab24d8d0aa3fb2 Reviewed-on: http://review.coreboot.org/7740 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan*: Reduce the EC SPI bus frequency to 3 MHz.Gabe Black
The EC doesn't seem to be able to handle its bus running at 4 MHz or higher. To avoid it not being able to keep up, we reduce the frequency of that bus on all nyan derivatives to 3 MHz. Because PLLP can't be divided that low, we switch the clock source to CLKM. BUG=chrome-os-partner:22849 TEST=Built and booted on nyan. BRANCH=None Original-Change-Id: I8f31b41098d64634427b4686f5333012f643fada Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193349 Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit c215c50a5bb982b0e671c951e2fe8df06db85db2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia60513d118aed8881927e9d52f170e27655ea8e7 Reviewed-on: http://review.coreboot.org/7739 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-13AMD AGESA boards: Prevent passing duplicate obj names to arScott Duplichan
For some of the boards using AMD processors, the Agesa Makefile.inc is processed twice, causing the list of obj files passed to the ar command to be added twice. This does not break the build, but does make the ar command line unnecessarily long. Change-Id: I02a7e6fc617e337ca2e2dceeff3d4db9995bfe16 Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/7787 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-10AMD 00730F01: Topology changes required by KaveriPI v1.1.0.7 updateBruce Griffith
The updated KaveriPI binary, upgrading to v1.1.0.7, requires changes to define the PSP device (PCI 0:08.0) and the IOMMU device (PCI 0:00.2). In the new AGESA binary, the IOMMU device is enabled and must be disabled in devicetree.cb and agesawrapper_amdinitenv() to maintain the same level of functionality. Change-Id: I3f47e0bd5a75729ec1e4b7b11885d0622c474342 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/7727 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-09spi: Factor EC protocol details out of the SPI drivers.Gabe Black
The SPI drivers for tegra and exynos5420 have code in them which waits for a frame header and leaves filler data out. The SPI driver shouldn't have support for frame headers directly. If a device uses them, it should support them itself. That makes the SPI drivers simpler and easier to write. When moving the frame handling logic into the EC support code, EC communication continued to work on tegra but no longer worked on exynos5420. That suggested the SPI driver on the 5420 wasn't working correctly, so I replaced that with the implementation in depthcharge. Unfortunately that implementation doesn't support waiting for a frame header for the EC, so these changes are combined into one. BUG=None TEST=Built and booted on pit. Built and booted on nyan. In both cases, verified that there were no error messages from the SPI drivers or the EC code. BRANCH=None Original-Change-Id: I62a68820c632f154acece94f54276ddcd1442c09 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/191192 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 4fcfed280ad70f14a013d5353aa0bee0af540630) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id8824523abc7afcbc214845901628833e135d142 Reviewed-on: http://review.coreboot.org/7706 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-12-09gizmosphere/gizmo2: Add the gizmo2 IRQ routingDave Frodin
Change-Id: Ic00790eedd48a2b78620fea329464701cd294cbb Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/7723 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-09gizmosphere/gizmo2: Changes to make it gizmo2Dave Frodin
The preceding patch copied gizmo2 from the amd/olivehill board. This commit includes the changes required to make the code reflect the gizmo2 hardware: - Update the vendor Kconfig to add gizmo2 - Update the mainboard Kconfig - Update devicetree - Add support in for the soldered down DDR3 - Update the CODEC verb data - Update the graphics connector settings - Adjust the temperature thresholds for the fan What's missing: - Interrupt routing tables Gizmo2 can boot DOS and Ubuntu 14.10. Change-Id: I3d7202957c082974689f2a8c04d8cd33dbdc1a89 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/7722 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-09mainboard/siemens/sitemp_g1p1/mainboard.c: Fix implicit conversionEdward O'Callaghan
Clang warns of an implicit conversion from 'double' to 'int' e.g. changes value from '26.67' to '26'. Thus take the floor() of the array and not change orginal behaviour. Change-Id: Ifcc7bbfe8d627451b82053f53a885f315e2550ec Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7725 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-09mainboard/{iwill,amd/serenget_*}: Fix ptr discards const qualifierEdward O'Callaghan
Change-Id: I22e55eb2b7fe06c416e5e4fd322045bc7031ed63 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7693 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-12-09fsp platfoms: add prototype & consolidate main entry-pointMartin Roth
- In '-ffreestanding' main() is just as any other function and so it needs a type-signature. Fixes a clang warning. - Bay Trail and Rangeley have the updated romstage.c with the code moved into the chipset, put the prototype in romstage.c. - The sandybridge code has not been updated, so the prototype for it goes into chipset_fsp_util.h, next to the prototype for romstage_main_continue. - Correct the return value of baytrail main() from void * to void and remove the unnecessary asmlinkage tag. I'm surprised that this didn't generate a warning... Change-Id: I85ac0797d1e55d2b7ffdca039a52820d7827e704 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7724 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-09mainboard/gizmosphere/gizmo2: Start adding new mainboardDave Frodin
This is a direct copy of the amd/olivehill mainboard which will be the starting point for this port. Change-Id: I6a643f7ac35d89e21df0ffdf4e61a2da46e19b82 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/7721 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-08mainboard: Fix correct index variable usage in double loop constructEdward O'Callaghan
Change-Id: I672c532c3f7179038d41f269bba434b8703e254b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Found-by: Clang Reviewed-on: http://review.coreboot.org/7718 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-08mainboard/siemens/sitemp_g1p1/mainboard.c: Remove unicode in stringEdward O'Callaghan
Remove illegal character encoding in string literal. Change-Id: I3c8dc67363705a2160e8266d1cea78c0d34d076f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7713 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-07mainboard/google/samus: Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: Id3b16872f62660393d938d6f95977a4e3842d0d1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7690 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-07Kconfig: Remove ACPI_SSDTX_NUM.Vladimir Serbinenko
Its scope is limited to a single mainboard and is only to go through ifdef. Kill it and move the value to the code. Change-Id: I76a87e2790d57dee8f37b51e33d0689fffd3a59d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7135 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-07ga-b75m-d3h: Remove duplicate sata_port_mapVladimir Serbinenko
Change-Id: I128f1dfea013a4f94c5b006a90c10aa32563d81c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7691 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-07hp/pavilion_m6_1035dx: select NO_UART_ON_SUPERIO in KconfigAlexandru Gagniuc
Change-Id: I324cdaf2025898b74bfc0d40c5ed8b88d2be5ad4 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7679 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-07x200/devicetree: Remove extraneous eventc.Vladimir Serbinenko
Change-Id: If72daed326216e24da85a6a9d342f36f4e1d9de5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7685 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-07x200/romstage: Add missing include.Vladimir Serbinenko
Change-Id: I47aa8619ba1e1939707ec654ffb54cae316929cf Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7684 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-07lenovo: Remove duplicate devicetree.cb eventc entry.Vladimir Serbinenko
Keep only the last one: it was the one which was really used. Change-Id: I19132f6224d6847e615e3c582aaa6e66b0d56c7a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7677 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-06kontron/986lcd-m: Fix PCI interrupt routing.Vladimir Serbinenko
The current interrupt routing shares interrupt 5 between LPC and PCI which isn't possible. Use IRQ 11 for all devices in PCI mode. Move conflicting LPC to free IRQ. Change-Id: I3ac8c2f19195ef6b07f4ee7dde64dd038d024126 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7477 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-06Remove IRQ_SLOT_COUNT on all boards without PIRQ table.Vladimir Serbinenko
This config is used only to generate PIRQ table. If no such table is supplied there is no need for config. Change-Id: I537d440f53019a6bf7f190446074e75e7420545a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7566 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-06vendorcode/amd/agesa: Make Porting.h common between familiesEdward O'Callaghan
Change-Id: Ica17b2452498f30b710533caf610c9f0c1a0452c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7594 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-06mainboard/lenovo/g505s/Kconfig: Has no SuperIOEdward O'Callaghan
Change-Id: I30fdfb70506241838436c3afbf6ddfdbff5cb302 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7668 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-06mainboard/lenovo/g505s: Build in EC ASL support for KBD/AUX portsEdward O'Callaghan
Rather than have Linux report: i8042: PNP: No PS/2 controller found. Probing directly. and go off probing PNP config space, build in EC ASL for the PS/2 keyboard and mouse. The ASL explicitly passes these resources to the Linux to avoid said probe. ASL Details: PS/2 keyboard (PNP0303 at 0x60,0x64 irq 1 ) PS/2 mouse (PNP0F13 at 0x60,0x64 irq 12) Change-Id: I0697fab65915907fbe2b3551182b3a1b0d665ddb Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7651 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-06mainboard/lenovo/g505s: Toggle on IOMMU supportEdward O'Callaghan
Toggle on in devicetree.cb and build into AGESA by buildOpts.c. Add ACPI and MPTABLES interrupt routers for IOMMU also. Change-Id: Ia838f9b70f09ed1180daeb5382edc08c4b74946c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7643 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-06mainboard/*/acpi/superio.asl: Use non-local inclusion syntaxEdward O'Callaghan
Use non-local inclusion syntax over relative paths for 'drivers/pc80/ps2_controller.asl'. Change-Id: Ie2bfa893dc268ec5118d2a9addadbc759d85d357 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7664 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-06mainboard/lenovo/g505s/buildOpts.c: Trivial variable renameEdward O'Callaghan
Minor fix to avoid confusion, nothing to see here. Change-Id: I89d56a91d2df049e85cf49c23218620caba84880 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7654 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-06fsp_baytrail: Allow selection of USB controller by get_optionMartin Roth
It was requested to be able to update XHCI vs EHCI via get_option, so I've added it here for minnow max. This could get moved to the chipset_fsp_util.c file later, but I'm adding it here for now. More checking needs to be added to this: - Are both controllers enabled in devicetree? If not, we don't want to allow the switch. Change-Id: I4d8d2229cb9fa0cd9068701454b28ffac6d8e767 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7633 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-06intel/minnowmax: Update devicetreeMartin Roth
- Align register values. - Enable both EHCI and XHCI so the choice of port used can be made at runtime. When both are enabled in devicetree, XHCI currently gets disabled by the FSP chipset code. This can be overridden in mainboard code or by a Kconfig entry, but there's a question about whether or not that's desired. - Enable function 1c.0 so the rest of the functions will be seen, even though the function is not actually used. This is a short-term fix, as the correct solution is to determine whether or not any of the other functions are enabled, and not to hide function 0 if they are. I am working on that, but I want to get this in for now. Change-Id: I83ae12c2393024b82a55d0b3a5ffa8782e16107e Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7663 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05minnowmax board: Update KconfigMartin Roth
- The ROM chip is 8MB, not 4MB. - Default to the 2GB SKU instead of 1GB - that's what's out right now. - Set CBFS size to 3MB - that's what the firmware descriptor is set to. Change-Id: Ic77f5c1e898dca39de573623707ff5f5e5ca9682 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7649 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05fsp_baytrail: remove register option for TSEG sizeMartin Roth
Set the UPD entry based on the Kconfig value instead of having two separate places that the value needs to be set. Change-Id: I3d32111b59152d0a8fc49e15320c7b5a140228a6 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7490 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2014-12-05lenovo/g505s: Kconfig: Remove unused PIRQ legacy bitsEdward O'Callaghan
Since this board does not provide a PIRQ table. Change-Id: I1068dd99c4cecdd2113484fe24ae2bb86a058cb3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7644 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-04RISCV: get RISCV to build againRonald G. Minnich
This makes lzmadecode 64-bit clean (I hope). It also cleans up a few other nits. Change-Id: I24492e9f357e8d3a6de6abc351267f900eb4a19a Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7623 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-12-04via/epia-n: Switch to per-device ACPIVladimir Serbinenko
Change-Id: Ica4d49b9f4f192b1544ba8cbd5f28a4019259be0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6942 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03i945: Consolidate acpi/platform.aslVladimir Serbinenko
Change-Id: Iccb2dda8a427e483c04693e46b00e0bc2452a26b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7086 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-03i82801gx: Enable upper CMOS in bootblock.Vladimir Serbinenko
Otherwise checksum may not work correctly on early stages. For compatibility with old bootblocks also enable it early in romstage. Change-Id: Ie541d71bd76af182e445aa5ef21fe5ba77091159 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7556 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-03mainboard/hp/pavilion_m6_1035dx: Remove HUDSON_LEGACY_FREEEdward O'Callaghan
The Embedded Controller sits behind the LPC bridge and so needs LPC decodes to be enabled. Remove the LPC decode enable out of agesawrapper.c. The enable is in fact done in: 'VOID FchInitResetLpcProgram(IN VOID *FchDataPtr)' which writes the magic '0xFF03FFD5' to register 0x44 of the PCI 14.3 LPC Bridge to enable LPC decodes when HUDSON_LEGACY_FREE is not defined. Change-Id: Ia487d21faa0fceb2557dbce14ef8822116fada91 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7628 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-03mainboard/lenovo/g505s/Kconfig: Remove HUDSON_LEGACY_FREEEdward O'Callaghan
The Embedded Controller sits behind the LPC bridge and so needs LPC decodes to be enabled. Remove the LPC decode enable out of agesawrapper.c. The enable is in fact done in: 'VOID FchInitResetLpcProgram(IN VOID *FchDataPtr)' which writes the magic '0xFF03FFD5' to register 0x44 of the PCI 14.3 LPC Bridge to enable LPC decodes when HUDSON_LEGACY_FREE is not defined. Change-Id: I0b4e99cc0d6f89f0261f26ee61b8c175a373c730 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7625 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam14: Move agesawrapper_amdinitmmio()Kyösti Mälkki
Enabling MMCONF PCI-e configuration access should be done before console_init(). This will likely move further to bootblock one day. Change-Id: I20c93fe6e79ef7e7981b2f1cd3c6b446feea0f4e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7163 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA: Trace execution with AGESA_EVENTLOG()Kyösti Mälkki
Change-Id: I5601ed92ca808603b0a9edad118ca54aa168aceb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7604 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA: Common agesawrapper for S3 resumeKyösti Mälkki
Change-Id: I27cd073331659e47d241a0ce249b2d080b4bab5c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7162 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA: Remove duplicate OemCustomizeInitEarly declarationsKyösti Mälkki
Change-Id: I59b2c3f235a6b30e68e78c2fe4065fbc0488bc4c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7158 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam15tn / fam15rl / fam16kb: Common agesawrapperKyösti Mälkki
Split FCH parts to southbridge/hudson. Change-Id: Ibe305fc3e47422523a57ffa9cf69cd401c786ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7159 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam15tn / fam15rl / fam16kb: Move LPC decode enable for serial portKyösti Mälkki
Move LPC decode enable out of agesawrapper.c. It should not be on the execution path of AP CPUs and function is not related to AGESA per se. Change-Id: I19d6a20fbc7a3d28601caa9aaa1d73d6930257ae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7602 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam14: Common agesawrapperKyösti Mälkki
Use copy of amd/persimmon. Change-Id: I7404cb164df9065bcdbaaf5367018870ea675adc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7157 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA fam12: Common agesawrapperKyösti Mälkki
Change-Id: Ic44d827323dc0d3c776e79c22088a2f1f654bcf2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7156 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA fam15: Common agesawrapperKyösti Mälkki
Place empty OemCustomizeInitEarly() and OemCustomInitPost() in a common file for now and split eventlog parser to a separate file. Change-Id: Ia8277ad13a800898b3e1a4e9c8fbd838ae2efeae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7155 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA fam15: Move LPC decode enable for serial portKyösti Mälkki
Move LPC decode enable out of agesawrapper.c. It should not be on the execution path of AP CPUs and function is not related to AGESA per se. Change-Id: I19c6a9c7d71c9899fdc898c09c337d747424fcec Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7601 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA: Report events with AGESA_EVENTLOG()Kyösti Mälkki
NOTE: For fam12 and fam14 ASSERT() is defined empty so execution may fall through critical failures. Change-Id: Ifef65d749d340f1df3a43b5fcb38c4315ef944e8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7154 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA: Use common header for agesawrapperKyösti Mälkki
Change-Id: I5189d0c55635aeb29553fd04a67490cfee3d88d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7153 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA Hudson/Yangtze: Remove unused GPP configuration in devicetreeKyösti Mälkki
GPP config from devicetree.cb is not implemented for fam15tn/fam16kb. Also only for asus/f2a85-m the configuration value matched the actual programming. Change-Id: Ic7a9aa1360f4ba35d202f3f7dd1fc3c20a52dde0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7600 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA Hudson/Yangtze: Remove obsolete devicetree parametersKyösti Mälkki
Change-Id: Ic6affae7e508f28b131c7d07191289f4fcbf2d74 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7599 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-02cubieboard: use new arm bootblock infrastructureAlexander Couzens
commit 8b685398 (ARM: Overhaul the ARM Makefile.) change config flags for cpu and mainboard bootblock initialization. Tested on a20/cubieboard2. Change-Id: I2a1019c2881bc7aada15322841204992d0106453 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/7188 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-02Replace hlt with halt()Patrick Georgi
There were instances of unneeded arch/hlt.h includes, various hlt() calls that weren't supposed to exit (but might have) and various forms of endless loops around hlt() calls. All these are sorted out now: unnecessary includes are dropped, hlt() is uniformly replaced with halt() (except in assembly, obviously). Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7608 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-01Add UCB RISCV support for architecture, soc, and emulation mainboard..Ronald G. Minnich
Works in the RISCV version of QEMU. Note that the lzmadecode is so unclean that it needs a lot of work. A cleanup is in progress. We decided in Prague to do this as one thing, because it forms a nice case study of the bare minimum you need to add to get a new architecture going in qemu. Change-Id: If5af15c3a70733d219973e0d032746f8ab027e4d Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7584 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-12-01Mark non-executable files non-executablePatrick Georgi
No need to mark Makefiles, C files or devicetrees executable. Change-Id: Ide3a0efc5b14f2cbd7e2a65c541b52491575bb78 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7618 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-30gigabyte/ga-b75m-d3h: Add new Intel mainboardDamien Zammit
This is based on LENOVO X230 port. Board boots to linux via SATA or USB. All USB ports are working. Remaining Issues: 1. Native raminit sometimes fails with "timC write discovery failed" even without changing the ram configuration. I suggest altering the native raminit code so that it reboots if that message appears to give a chance for the boot process to recover. 2. VGA does not work. Native graphics initialization only supports LVDS and the VGA Option ROM still hangs when run in SeaBIOS. Change-Id: I91a7aab96d6c5f213b097cd55fcc47d4c94b3172 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/7341 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-30Replace hlt() loops with halt()Patrick Georgi
Change-Id: I8486e70615f4c404a342cb86963b5357a934c41d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7606 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-29mainboard/intel/minnowmax: use Baytrail Gold3 FSPYork Yang
Baytrail Gold3 FSP support memory down configuration. Update Minnow Max to use Gold3 FSP. Set memory down data in devicetree.cb, instead of use different FSP image. Change-Id: Ic03da2d2a1cee5144b9a013d3dd9f982ff043123 Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/7581 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-11-28ACPI: Remove CBMEM TOC from GNVSKyösti Mälkki
This existed for ChromeOS but was no longer used with DYNAMIC_CBMEM. See commit a0b4a8d. Change-Id: Iae82498ab729df5682d89e66bb9de96457e91619 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7465 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-28mainboard/lenovo/g505s/devicetree.cb: Fix duplicate typoEdward O'Callaghan
Change-Id: Ic2b8ca54b9a16c13439b3081969deec0b7187e01 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7588 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-27mainboard/lenovo/g505s: New port Richland APU A10-5750MEdward O'Callaghan
Richland APU A10-5750M 8GB RAM 4MB Flash Boots to working Linux with SeaBIOS payload. S3 works with Linux 3.16.3-2 Debian Jessie. Change-Id: I5d05d1b31400fdb9e41c2e011c5b0bf9986fe970 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/7560 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-26sandy/ivy: Remove explicit setting of HAVE_SMI_HANDLER.Vladimir Serbinenko
Southbridge already selects it, no need to repeat. Change-Id: I9a5ad553f48e30103371cc2d896168ae4abfb8ef Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7570 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-26agesa/family12: Switch to per-device ACPIVladimir Serbinenko
Change-Id: I944e35b04612eca8add80c9f546df99a9a930ac8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7036 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-26agesa/family16kb: Switch to per-device ACPIVladimir Serbinenko
Change-Id: I7d9cbbd1aeadecc1a4c91816df303c6cb4817fe3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7034 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-26agesa/family15tn: Switch to per-device ACPIVladimir Serbinenko
Change-Id: Icc2e7b66b3ff5f70b219a3e67494ce3df055c9d5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7033 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-26agesa/family15: Switch to per-device ACPIVladimir Serbinenko
Change-Id: I3847eb1524a5a816cd4885a31d703b410804c1f0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7032 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-25agea/family14: Switch to per-device ACPIVladimir Serbinenko
Change-Id: Icc663c28713f2d872bfeb1749303ce92db953bf5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7031 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-25lenovo/t60: Remove PIRQ table.Vladimir Serbinenko
This was copied from P2B-F without doing any modification. It never worked. Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Change-Id: I2c90688c8ff8c3bd272d24f059e8e1bfb86e2b4a Reviewed-on: http://review.coreboot.org/7555 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-25getac/p470: Change COM3/COM4 IRQ to move it out of PCI IRQ ones.Vladimir Serbinenko
The suggested IRQs 10 and 11 would conflict with PCI IRQ assignment (10 for most interrupts on this board). Suggest IRQ 6 instead. It's actually a noop since the code is commented out. Change-Id: I0fdd8e2091d3dc79cfb1809a9ea5e1e841ca598a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7476 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-25google/butterfly: fix off-by-one issuesPatrick Georgi
GPIOs 32 and 64 used the wrong code path. Change-Id: I1d293cf38844b477cac67bc19ce5e5c92a6e93ca Found-by: Coverity Scan Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7577 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-23sandy/ivy/nehalem: Remerge interrupt handlingVladimir Serbinenko
On those chipsets the pins are just a legacy concept. Real interrupts are messages on corresponding busses or some internal logic of chipset. Hence interrupt routing isn't anymore board-specific (dependent on layout) but depends only on configuration. Rather than attempting to sync real config, ACPI and legacy descriptors, just use the same interrupt routing per chipset covering all possible devices. The only part which remains board-specific are LPC and PCI interrupts. Interrupt balancing may suffer from such merge but: a) Doesn't seem to be the case of this map on current systems b) Almost all OS use MSI nowadays bypassing this stuff completely c) If we want a good balancing we need to take into account that e.g. wlan card may be placed in a different slot and so would require complicated balancing on runtime. It's difficult to maintain with almost no benefit. Change-Id: I9f63d1d338c5587ebac7a52093e5b924f6e5ca2d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7130 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-23lenovo/x201: Remove $PIR and MP tables.Vladimir Serbinenko
Not sure if they ever worked. Change-Id: I77cf090763aa7ac46480a5a9583985b10b02a267 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7551 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-23macbook21: Remove PIRQ table.Vladimir Serbinenko
This was copied from T60 which in turn copied from P2B-F without doing any modification. It never worked. Change-Id: I23fc8a7775df410d0f9735d1461dd9b80e54d076 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7554 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-22amdk8: Move to implicit length patchingVladimir Serbinenko
Change-Id: I8b4c36adaa7ea791ae1a8f7c0d059b9201b08f94 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7332 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-22amdfam10: Move to per-device ACPIVladimir Serbinenko
Change-Id: I9ce2333e1ea527843f83d411dea2a669263156c2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7027 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-20amd/olivehillplus: Share agesawrapper headerKyösti Mälkki
This interface is common with AMD PI implementations. Change-Id: Ifabfce97db749e04aa19e53f62216be78158b282 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7150 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Tested-by: build bot (Jenkins)
2014-11-20AMD: Isolate AGESA and PI build environments for southbridgeKyösti Mälkki
To backport features introduced with recent Chromebooks and/or Intel boards in general, heavy work on the AMD AGESA platform infrastructure is required. With the AGESA PI available in binary form only, community members have little means to verify, debug and develop for the said platforms. Thus it makes sense to fork the existing agesawrapper interfaces, to give AMD PI platforms a clean and independent sandbox. New directory layout reflects the separation already taken place under 3rdparty/ and vendorcode/. Change-Id: Ia730f0e45e7c1bdfc0c91e95eb6729a77773e2b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7388 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Tested-by: build bot (Jenkins)
2014-11-20AMD: Isolate AGESA and PI build environmentsKyösti Mälkki
To backport features introduced with recent Chromebooks and/or Intel boards in general, heavy work on the AMD AGESA platform infrastructure is required. With the AGESA PI available in binary form only, community members have little means to verify, debug and develop for the said platforms. Thus it makes sense to fork the existing agesawrapper interfaces, to give AMD PI platforms a clean and independent sandbox. New directory layout reflects the separation already taken place under 3rdparty/ and vendorcode/. Change-Id: Ib60861266f8a70666617dde811663f2d5891a9e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7149 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Tested-by: build bot (Jenkins)
2014-11-20AGESA: Refactor HUDSON_SATA_MODEKyösti Mälkki
Expose one CONFIG_ variable instead of seven to C preprocessor. Change-Id: Ib815127561d320a5e8f8e6ef168933d81809521e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7494 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-20Replace includes of build.h with version.hKyösti Mälkki
As build.h is an auto-generated file it was necessary to add it as an explicit prerequisite in the Makefiles. When this was forgotten abuild would sometimes fail with following error: fatal error: build.h: No such file or directory Fix this error by compiling version.c into all stages. Change-Id: I342f341077cc7496aed279b00baaa957aa2af0db Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7510 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-20vendorcode/amd/agesa/f*/Porting.h: Sync files across fam'sEdward O'Callaghan
Sync up these 'Porting.h' headers to include fixes from each family on botched-up typedef's for primitive data types. Fix corresponding breakage introduced by typecasts in mainboards. Change-Id: I003b155cc6c860f6b0cd75667083634a04814473 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7512 Tested-by: build bot (Jenkins)
2014-11-20mainboard/apple/macbook21/romstage.c: Missing prototype headerEdward O'Callaghan
Fix warning thrown by Clang due to missing prototype for main entry point function in -ffreestanding. main() is as any other function in freestanding and so a prototype is strictly needed. Change-Id: Ic27e0f93065b1aa85d3979db61b5e2ff0dd2a310 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7518 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-11-20mainboard/intel/cougar_canyon2/romstage.c: Missing prototypeEdward O'Callaghan
Fix warning thrown by Clang due to missing prototype for main entry point function in -ffreestanding. main() is as any other function in freestanding and so a prototype is strictly needed. Change-Id: Icb29ced0306d5089049a35b1d8862f86a555ff1f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7517 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-11-20mainboard/asus: Add F2A85-M LE variant to F2A85-M.Tobias Diedrich
The F2A85-M LE has less DRAM slots and needs different settings. Additionally, the audio codec verb table is different. Change-Id: I0e13c91fc924f4f9eac534fd13d57830654dd0aa Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/7356 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-11-20mainboard/asus/f2a85-m: Disable LEGACY_FREE settingTobias Diedrich
The ASUS F2A85-M has a keyboard controller, serial and parallel port and thus is not legacy free at all. Setting LEGACY_FREE causes some early bootup serial debug messages to be lost. Change-Id: Ibba38826e2f863c6e490e52bd5854e5dc0b6a357 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/7480 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-11-20mainboard/asus/f2a85-m: Disable IMC build option.Tobias Diedrich
The A85 IMC is unused on this board, disable the build option. The original ASUS BIOS image does not contain any IMC firmware. Change-Id: I93fd50f2d4a85811ed43722e90f38864610f1cda Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/7385 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-11-19i82801ix,bd82x6x,ibexpeak: rewrite expresscard hotplugVladimir Serbinenko
This implementation is more compact, unified and works with windows as well. Tested under windows and under Debian GNU/Linux. Change-Id: I585dec12e17e22d829baa3f2dc7aecc174f9d3b5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7296 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins)
2014-11-19mainboard/amd/torpedo/Kconfig: Clean up formattingEdward O'Callaghan
Change-Id: Ifdfb78e39280af5017034b57e63c33b461b9b531 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7474 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-11-19fsp_baytrail: Update chip.h UPD entries to match names in fspvpd.hMartin Roth
The entries in chip.h are used to set the UPD values. These had originally been shortened and did not match the names of the structure entries in vendorcode/intel/fsp/baytrail/include/fspvpd.h This patch aligns the names. - Update names in chip.h. - Update names in devictree registers for bayley bay and minnow max. - Update names in chipset_fsp_util.c Change-Id: I8d7e34195cec2e63802d7e07e5aed71735556936 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7486 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-16via/epia-m700: Remove lefotver AmlCodeVladimir Serbinenko
Change-Id: I70e3f2198292bcaffd08beb1d56807428416af5b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7390 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 11:46:51 +0000