summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2011-01-18remove the code which is not ready to release.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6264 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-18remove the code which is not ready to release.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6262 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-16Ooops lets see if this extra comment removal fixes this.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6257 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-16Trivial, cleanup of GPIO comments.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6256 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-14Improved GPIO setup for roda/rk886ex, and some documentationPatrick Georgi
on what the GPIOs are used for. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6254 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-14Allow coreboot to initialize CMOS if checksum is invalid.Patrick Georgi
If a file "cmos.default", type "cmos default"(0xaa) is in CBFS, a wrong checksum leads to coreboot rewriting the first 128 bytes (except for clock data) with the data in cmos.default, then reboots the system so every component of coreboot works with the same set of values. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6253 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-13Default to CRT on Kontron/986lcd-m. "default display" doesn't alwaysPatrick Georgi
select the right output device. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6252 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-06Various Nokia IP530 fixes.Marc Bertens
- Correct default ROM image size for this board (512KB is correct). - devicetree.cb: Add AUX I/O config (mainly GPIO settings). This allows you to control the LEDs in the front panel and JP900/JP901 can be read. - irq_tables.c: Rework PIRQ table to make more onboard devices work. Also, avoid IRQ9. - mainboard.c: Drop unneeded functions, everything is done in devicetree.cb. Signed-off-by: Marc Bertens <mbertens@xs4all.nl> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6247 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-04Trivial: use the IO_APIC_ADDR constant defined in ioapic.h, and spell checkKerry She
Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Kerry She <kerry.she@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6238 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-01AMD SB800: Drop component prefix from filenames.Uwe Hermann
We did the same with other chipsets in r6150. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6236 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-01AMD Bimini: Use mptable_init() in mptable.c.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6234 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-01AMD Bimini: Small fixes, and updates to recent trunk conventions.Uwe Hermann
- Move CACHE_AS_RAM_ADDRESS_DEBUG #define to Kconfig, where it was renamed to HAVE_DEBUG_CAR in r5898. - Move QRANK_DIMM_SUPPORT to Kconfig, see r6028. - Drop obsolete/unused COMPRESS, see r6145. - Drop obsolete SET_NB_CFG_54, see r6086. - Move SET_FIDVID/SET_FIDVID_CORE_RANGE to Kconfig, see r6077. Actually, the default for SET_FIDVID_CORE_RANGE is 0, so drop it. - Rename some GENERATE_* options to HAVE_*, see r6027. - Drop "select CACHE_AS_RAM", this is now set in the socket, see r6151. - Drop ACPI_SSDTX_NUM, the global default is 0 already. - Random whitespace and coding style fixes. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6233 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-01AMD Bimini: Drop duplicate ASL files as we did for other boards.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6232 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-01Add support for the AMD Bimini eval mainboard.Kerry She
Signed-off-by: Kerry She <Kerry.she@amd.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6231 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-29-Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)Nils Jacobs
to FG (FooGlue). As the GX2 has no VIP port. -Change the Memmory setup MSR register names so they correspond better to the databook. (Part1) This is less confusing for beginners. -Add a MSR printing function to northbridge.c like in the Geode LX code. -Remove the AES register names.(GX2 has no AES registers) -Delete some unused code. -Clean up GX2 northbridge code to match Geode LX code. -Add missing copyright header to northbridge.c. -Move hardcoded IRQ defining from northbridge.c to irq_tables.c . Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6221 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27Fix most CONFIG_DEBUG_RAM_SETUP issues. Stefan Reinauer
The intel/xe7501devkit is still broken, I think the (romcc) image is too big to fit in the bootblock if CONFIG_DEBUG_RAM_SETUP is enabled. It would make sense to convert all CPU_INTEL_SOCKET_MPGA604 to CAR, but I have no hardware to test. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6215 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-26All the values should stay untouched or be set automatically by the resourceStefan Reinauer
allocator. If that does not work out, they should be set in the code. Setting them in Kconfig is the worst possible thing to do. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6213 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-26Random fixes for TI pci1x2x / Nokia IP530 / others.Uwe Hermann
- nokia/ip530/devicetree.cb, southbridge/ti/pci1x2x/pci1x2x.c: - Fix SMSC FDC37B787 name (was a typo). - Disable PS/2 keyboard/mouse LDN, the IP530 doesn't have either. - Fix typo: s/PCI_DEVICE_ID_TI_1420/PCI_DEVICE_ID_TI_1520/. - All of these are confirmed by Marc Bertens on IRC. - Fix a few CHIP_NAME HP board names. - Random whitespace and coding-style fixes. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6212 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-25Nokia IP530: Add missing "select SDRAMPWR_4DIMM".Uwe Hermann
This is needed for all Intel 440BX boards with 4 DIMM slots (such as this one). Thanks Marc Bertens <mbertens@xs4all.nl> for bringing up the issue and for the success report for this fix on IRC. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6207 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-19The same mechanisms are used for normal and fallback images. Stefan Reinauer
Hence drop the FALLBACK_ prefix Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6204 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-19ASUS M2N-E: Enable PCI-E x16 slot.Uwe Hermann
Simple devicetree.cb fix, tested on hardware using a PCI-E x16 graphics card. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6203 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18SMM for AMD K8 Part 1/2Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6201 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18Fix a few whitespace and coding style issues.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6200 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18A couple of Poulsbo fixes:Patrick Georgi
- Don't include cmc.bin to the build. It's required, but we don't ship it - mptable's API changes a bit. Adapt. - Fix ACPI for new iasl versions with improved code validation Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6199 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18Support Intel SCH (Poulsbo) and add iwave/iWRainbowG6 boardPatrick Georgi
which uses it. Compiles, but not boot tested lately. Many things missing (eg. SMM support, proper ACPI, ...) Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6198 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-17Remove some more unused/incorrect hda_verb.h files.Uwe Hermann
As discussed on the mailing list at http://www.coreboot.org/pipermail/coreboot/2010-December/062393.html http://www.coreboot.org/pipermail/coreboot/2010-December/062510.html Someone who owns these boards should create correct files at some point. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6196 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-17drop one more version of doing serial uart output differently.Stefan Reinauer
coreboot made it kind of complicated to print a character on serial. Not quite as complicated as UEFI, but too much for a good design. Fix it. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6191 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-16Add TINY_BOOTBLOCK support for the SiS966 southbridge.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6184 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-16Get mptable OEM/product ID from kconfig variables.Uwe Hermann
We currently use "COREBOOT" unconditionally as the "OEM ID" in our mptable.c files, and hardcode the mainboard name in mptable.c like this: mptable_init(mc, "DK8-HTX ", LAPIC_ADDR); However, the spec says "OEM ID: A string that identifies the manufacturer of the system hardware." (Table 4-2, page 42) so "COREBOOT" doesn't match the spec, we should use the hardware vendor name. Thus, use CONFIG_MAINBOARD_VENDOR which we have already as the "OEM ID" (truncate/fill it to 8 characters as per spec). Also, use CONFIG_MAINBOARD_PART_NUMBER (the board name) as "product ID", and truncate/fill it to 12 characters as per spec, if needed. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6183 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-15Build fix.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6181 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-15Cleanup up HD audio codec / hda_verb.h files.Uwe Hermann
Most of the current hda_verb.h files are identical (same MD5 sum) and are intended for a specific MCP55 board with the Realtek ALC880 audio codec, which has the vendor/device ID of 0x10ec0880. They were splitted out from the MCP55 southbridge code and put into board dirs a long time ago (which is correct, as those settings are indeed board-specific), but they were never adapted to those boards. Here's the table of which codec is soldered onto which board, based on checking the vendor website board spec pages, and the board manuals: - GIGABYTE GA-M57SLI-S4: Realtek ALC883 - MSI MS-7260: Realtek ALC883 - MSI MS-9652: Realtek ALC888 - MSI MS-9282: Server board, doesn't have audio at all - Tyan S2912: Server board, doesn't have audio at all - All Supermicro boards: Server boards, don't have audio at all - NVIDIA l1_2pvv: No public info to be found, but I assume this was the original MCP55 eval board for the port and it's probably has the Realtek ALC880 codec used in the original hda_verb.h. These are the codec vendor device/IDs involved: Realtek ALC880: 0x10ec0880 Realtek ALC883: 0x10ec0883 Realtek ALC888: 0x10ec0888 The following files are marked as incorrect / TODO, as the ID of the codec doesn't match and thus will never get actually used (you'll see "HDA: no verb!" or similar in the coreboot logs). Even if the ID matched, the rest of the table would be incorrect anyway because the values are highly board-specific. ./src/mainboard/gigabyte/m57sli/hda_verb.h ./src/mainboard/msi/ms9652_fam10/hda_verb.h ./src/mainboard/msi/ms9282/hda_verb.h The following files can be safely dropped as these are server boards and don't have HD audio (or other audio) at all: ./src/mainboard/supermicro/h8dmr/hda_verb.h ./src/mainboard/supermicro/h8qme_fam10/hda_verb.h ./src/mainboard/supermicro/h8dme/hda_verb.h ./src/mainboard/supermicro/h8dmr_fam10/hda_verb.h ./src/mainboard/tyan/s2912/hda_verb.h ./src/mainboard/tyan/s2912_fam10/hda_verb.h The following two are correct and can stay: ./src/mainboard/nvidia/l1_2pvv/hda_verb.h ./src/mainboard/getac/p470/hda_verb.h Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6180 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13no leading zeroes.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6177 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13This patch just turns on the ACPI resume.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6175 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13Compile cbmem.c instead of including it in romstage,Rudolf Marek
and do that only if resume is done. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6174 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13We hardcode highmemory size in every northbridge! This is bad, and ↵Rudolf Marek
especially if suspend to ram is involved. Let the default be taken from cbmem.h which also handles the suspend logic. Abuild tested. Please check all changes if I did not make any wrong while converting this to bytes. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6171 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13Add support for the ASUS M2N-E board.Uwe Hermann
This is an AMD K8 + NVIDIA MCP55 + ITE IT8716F mainboard. It has a working hda_verb.h file for HD audio, and a fanctl.c file is used to enable the CPU fan (among others) so that we don't kill the CPU due to excessive heat. Even though some TODOs remain of course, it works good enough to successfully boot Linux (e.g. via SeaBIOS). The full status report is available at: http://www.coreboot.org/ASUS_M2N-E Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6170 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11Fix the build failure. We have now common fadt.c.Rudolf Marek
[PATCH] SB700 common FADT was not applied to this board because it was in the meanwhile added. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6167 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11Following patch makes just one fadt.c file. For SB700.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6165 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11After this has been brought up many times before, rename src/arch/i386 toStefan Reinauer
src/arch/x86. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6161 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-10Two hda_verb.h files: Add more comments.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6160 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-10Add TINY_BOOTBLOCK support for AMD SB700.Uwe Hermann
Factor out the ROM decode enable functionality into bootblock.c and handle it via the usual TINY_BOOTBLOCK mechanism. Use "select TINY_BOOTBLOCK" in the southbridge, not individual boards. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6159 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-09Build fix, forgot to run abuild on the latest tree.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6157 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-09Deduplicate various ACPI .asl files.Uwe Hermann
The files debug.asl, globutil.asl, and statdef.asl are duplicated in many K8/Fam10h boards. However, they're neither board-specific nor K8/Fam10h-specific nor AMD-specific, so move them to src/arch/i386/acpi. debug.asl contains generic chunks for I/O port 0x80 handling, and debug output over serial port (init COM port, send byte, send string, etc). globutil.asl contains utility methods for string comparison, string length and similar stuff. statdef.asl contains generic ACPI bit definitions / status codes from the ACPI spec (not board- or chipset-specific). This patch was mostly generated by: mkdir src/arch/i386/acpi svn add src/arch/i386/acpi svn cp src/mainboard/amd/dbm690t/acpi/debug.asl src/arch/i386/acpi/ svn cp src/mainboard/amd/dbm690t/acpi/globutil.asl src/arch/i386/acpi/ svn cp src/mainboard/amd/dbm690t/acpi/statdef.asl src/arch/i386/acpi/ cd src/mainboard find . -name debug.asl -exec svn rm {} \; find . -name globutil.asl -exec svn rm {} \; find . -name statdef.asl -exec svn rm {} \; Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6156 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08Tobias Diedrich wrote:Tobias Diedrich
> Definitively a iasl problem, it can't even disassemble it's own > output back to something equivalent to the input file. > It seems to be generating Bytecode for the Add where it shouldn't. Here is a solution using the SSDT. Unfortunately iasl does not resolve simple arithmetic at compile time, so we can not use Add(DEFAULT_PMBASE, PCNTRL) in the Processor statement. This patch instead dynamically generates the processor statement. I can't use the speedstep generate_cpu_entries() directly since the cpu doesn't support speedstep. For now the code is in the southbridge directory, but maybe it should go into cpu/intel/ somewhere. IIRC notebook cpus of the era can already have speedstep, so it would probably be possible to pair the i82371eb with a speedstep-capable cpu... Also, I don't know if multiprocessor boards (abit bp6?) would need to be handled differently. Abuild-tested. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6153 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08Move "select CACHE_AS_RAM" lines from boards into CPU socket.Uwe Hermann
All K8/Fam10h boards use CAR, so move the "select CACHE_AS_RAM" into the socket directories, and remove it from the individual boards. Do the same for Intel CPUs/sockets where all boards use CAR. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6151 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08second round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6150 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-07Get rid of some unneeded function prototypes in romstage.c files.Uwe Hermann
Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-07Trivial. Fix typo.Zheng Bao
sh> find -name "acpi_tables.c" | xargs sed -i "s/FDAT/FADT/g" Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6146 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-06Drop unused/obsolete CONFIG_COMPRESS from a few board Kconfigs.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6145 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-06Get rid of some useless/empty *_fixups.c files.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6144 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-06Winbond W83627HF: Use existing functions instead of open-coding.Uwe Hermann
Use w83627hf_set_clksel_48() where needed instead or open-coding the same functionality, and also use w83627hf_enable_serial() instead of w83627hf_enable_dev() (which does exactly the same, but isn't wrapped in the enter/exit config mode functions). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6143 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-06Add initial support for the ASUS M4A78-EM.Juhana Helovuo
Signed-off-by: Juhana Helovuo <juhe@iki.fi> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6141 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-05W83627DHG/W83627EHG fixups for virtual LDNs.Uwe Hermann
W83627DHG: - Add proper "virtual LDN" handling for the LDNs that need it (i.e., those that don't have their "enable" bit in bit 0 of the 0x30 register). - Fix various I/O masks in the pnp_dev_info[] array as per datasheet. Add missing PNP_IRQ0 to the W83627DHG_ACPI LDN. W83627EHG: - Similar to W83627DHG, improve the "virtual LDN" setup a bit (it was mostly implemented already, though). - Add missing PNP_IRQ0 to the W83627EHG_ACPI LDN. Also: Fix up devicetree.cb of all boards using W83627DHG/W83627EHG to adapt for the virtual LDNs. include/device/pnp.h: Add comment that 'function' (which refers to the LDN and should probably be renamed later) has to be at least 16 bits wide. In theory LDNs could use u8, but due to the virtual LDN info being encoded in the "high byte" of 'function' it must be at least u16. asrock/939a785gmh/romstage.c: Drop unused GPIO6_DEV. ibase/mb899/romstage.c: Use DUMMY_DEV instead of a specific LDN (serial port 1 in this case) to avoid confusion. The global registers manipulated there are accessible from any LDN. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6140 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-04Following patch removes the cut-and-paste stuff from Mahagony and fixes the ↵Rudolf Marek
_CRS object to make it work (same code as on M2V-MX SE) Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6138 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-30The patch just make the power LED on.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6135 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-30Fix the SPD to channel mapping. Please note that there is something wrong ↵Rudolf Marek
with UMA. Single channel (in slot DDR1 and DDR3) produces strange artefacts on screen (and hang) Dual Channel (in DDR1 and DDR2 aka blue slot) - works nice All slots populated - same case as Single channel - must be something wrong with UMA. Tested with 2x 512MB CAS 2.5 DDR400 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6134 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-29Tobias Diedrich wrote:Tobias Diedrich
> Stefan Reinauer wrote: > > The specified IO port is most likely wrong. As the comment mentions, the > > SSDT is a good place for that. A preprocessor define used both in the > > CPU init code and in the asl would solve the problem without an SSDT. > > For some info on CPU SSDT creation on intel check out > > src/cpu/intel/speedstep/acpi.c > > The IO port is ok (and I wrote the comment myself ;)): > DEFAULT_PMBASE is 0xe400 > PCNTRL reg offset is 0x10 > > Using the preprocessor will probably work too if iasl can do simple > arithmetic (likely yes), I'll look into that. BTW, my first idea was to use an acpi method that looks up pmbase in the pci cfg space, but when I define a method like this: Method(TEST, 2) { Return (Add(Arg0, Arg1)) } I get: |build/mainboard/asus/p2b/dsdt.ramstage.asl 9: Processor (CPU0, |0x01, TEST(0xe400, 0x10), 0x06) {} |Error 4096 - syntax error, unexpected PARSEOP_NAMESEG, |expecting ')' ^ While using the builtin Add() directly works. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6132 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-28devicetree.cb: Only add as many entries as there are DIMM slots.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6129 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-27After finding the missing bit poweroff works now.Tobias Diedrich
I cleaned up the patch and moved most of the dsdt.dsl and acpi_tables.c into the southbrige/northbridge directory. Updated patch should fix abuild error and incorporates suggestions on irc by uwe (thanks for the comments). Thanks to Idwer Vollering <vidwer@gmail.com> for the original patch. Tested: Linux (poweroff, powerbutton event) XP (poweroff, powerbutton event) Abuild-tested Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6127 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-26Broadcom BCM5785: Add TINY_BOOTBLOCK support.Uwe Hermann
In bcm5785_enable_rom(): Use PCI IDs from pci_ids.h instead of hardcoding, and use 'dev' instead of 'addr' as device_t variable name. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6126 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-26AMD-8111: Add TINY_BOOTBLOCK support.Uwe Hermann
Also, add missing license header to amd8111_enable_rom.c, add some more code comments and use PCI IDs from pci_ids.h instead of hardcoding. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6124 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-25MCP55: Add TINY_BOOTBLOCK support.Uwe Hermann
Also, move CONFIG_HT_CHAIN_END_UNITID_BASE #ifdef block to mcp55.h to make the build work (but this is a good idea anyway, as it's used in multiple files). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6123 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-24S3 support for ASUS M2VTobias Diedrich
This adds the board-specific parts for S3 support on the M2V board. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6122 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-221) wraps the s3 parts of chipset code/memory init code with if ↵Rudolf Marek
CONFIG_HAVE_ACPI_RESUME == 1 getting rid of ugly define in romstage.c 2) the patch implements get_cbmem_toc in chipset specific way if defined. On Intel targets it should be unchanged. On K8T890 the the cbmem_toc is read from NVRAM. Why you ask? Because we cannot do it as on intel, because the framebuffer might be there making it hard to look for it in memory (and remember we need it so early that everying is uncached) 3) The patch removes hardcoded limits for suspend/resume save area (it was 1MB) on intel. Now it computes right numbers itself. 4) it impelements saving the memory during CAR to reserved range in sane way. First the sysinfo area (CAR data) is copied, then the rest after car is disabled (cached copy is used). I changed bit also the the copy of CAR area is now done uncached for target which I feel is more right. I think I did not change the Intel suspend/resume behaviour but best would be if someone can test it. Please note this patch was unfinished on my drive since ages and it would be very nice to get it in to prevent bit rotten it again. Now I feel it is done good way and should not break anything. I did a test with abuild and it seems fine. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6117 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22Drop per-board ram_check() calls for now.Uwe Hermann
Every board had a slightly different invokation, very often commented out anyway. We could either decide that this is only to be used by developers during bringup (and thus added manually to romstage.c and removed before the board gets committed). This method seems to be preferred from what I have heard on IRC / mailing list in the past. Or, we add the ram_check() somewhere globally and allow the user to enable it via menuconfig (possibly only if EXPERT is selected). Either way, the current method of spreading the calls all over the place is not really the way to go. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6115 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22Final set of smp_write_bus -> mptable_write_buses changes.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6114 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22i855: Remove useless memctrl indirection.Uwe Hermann
This needlessly complicates the code and increases register pressure on romcc chipsets. We did the same conversion on i440BX, i830, and others. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6112 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22Printing coreboot debug messages on VGA console is pretty much useless, sinceStefan Reinauer
initializing VGA happens pretty much as the last thing before starting the payload. Hence, drop VGA console support, as we did in coreboot v3. - Drop VGA and BTEXT console support. Console is meant to be debugging only, and by the time graphics comes up 99% of the risky stuff has already happened. Note: This patch does not remove hardware init but only the actual output functionality. The ragexl driver needs some extra love, but that's for another day - factor out die() and post() - drop some leftover RAMBASE < 0x100000 checks. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: QingPei Wang<wangqingpei@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Simplify a few code chunks, fix whitespace and indentation.Uwe Hermann
Also, remove some less useful comments, some dead code / unused functions. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6108 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Drop excessive whitespace randomly sprinkled in romstage.c files.Uwe Hermann
Also drop some dead or useless code snippets. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6107 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Convert more boards to use mptable_write_buses.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6106 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Convert boards to use mptable_write_buses.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6105 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Move MCP55_PCI_E_X_* to Kconfig. Any useless values in romstage.cs werePatrick Georgi
not brought over to Kconfig (this applies to all #defines to 4, as that's the default anyway) Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6104 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Use DIMM0 et al in lots more places instead of hardocding values.Uwe Hermann
The (0xa << 3) expression equals 0x50, i.e. DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6103 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Build fix.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6102 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Merge all spd_addr.h into the resp. romstage.c files.Uwe Hermann
Except for one instance the spd_addr.h were now very tiny, there's not much point in keeping that stuff in an extra file. The only user of those files is the romstage.c file anyway. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6101 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Some more DIMM0 related cleanups and deduplication.Uwe Hermann
- VIA VT8235: Do the shift in smbus_read_byte() as all other chipsets do. - spd.h: Move RC00-RC63 #defines here, they were duplicated in lots of romstage.c files and lots of spd_addr.h files. Don't even bother for those spd_addr.h which aren't even actually used, drop them right away. - Replace various 0x50 hardcoded numbers with DIMM0, 0x51 with DIMM1, and 0xa0 with (DIMM0 << 1) where appropriate. - Various debug.c files: Replace SMBUS_MEM_DEVICE_START with DIMM0, SMBUS_MEM_DEVICE_END with DIMM7, and drop useless SMBUS_MEM_DEVICE_INC. - VIA VX800: Drop unused SMBUS_ADDR_CH* #defines. - VIA VT8623: Do the shift in smbus_read_byte() as all other chipsets do. Then, replace 0xa0 (which now becomes 0x50) with DIMM0. - alix1c/romstage.c, alix2d/romstage.c: Adapt to recent bit shift changes. - Various files: Drop DIMM_SPD_BASE and/or replace it with DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6100 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
addressing scheme to match the rest of the tree (0x50 instead of 0xa0). abuild tested. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18Fix/drop some obsolete comments,Uwe Hermann
- s/Options.lb/devicetree.cb/ - s/Config.lb/devicetree.cb/ - s/cache_as_ram_auto.c/romstage.c/ - h8dmr_fam10/README: Drop obsolete comment, we have mc_patch_01000086.h in the tree now. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6095 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18Drop unused and incorrect RTC_DEV for Winbond W83627EHG.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6094 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18Move DIMM_MAP_LOGICAL to Kconfig.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18Move register block definitions out of board code intoPatrick Georgi
chipset code (where it belongs) Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6088 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18Eliminate SET_NB_CFG_54 option. There was no board thatPatrick Georgi
deselected it, and very likely there won't ever be any hardware that requires it deselected. Keep the "selected" code path around, leading to no functional change. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6086 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17Move Intel power management related defines to some central location.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6085 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17Dynamically generate PNP0C02 mainboard resources in SSDTTobias Diedrich
Updated patch with improved comments and small bugfix (use same value for min and max on io resource). While adding the area between TOM1 and 4GB to \SB.PCI0._CRS seems to be the easiest way to get both Linux and Windows happy, it is not quite correct because reserved areas like APIC, MMCONF etc. ranges need to be excluded. This is a proof of concept patch for the M2V board that dynamically creates a ResourceTemplate() containing these in the SSDT and adds a corresponding PNP0C02 device to the DSDT. All resources that have IORESOURCE_RESERVE and (IORESOURCE_MEM or IORESOURCE_IO) set are added. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Added M2V-MX SE too. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6084 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17Linux also needs the MMCONF area to be reserved either in E820 orTobias Diedrich
as an ACPI motherboard resource or it will not enable MMCONFIG and the extended pcie configuration area will be unaccessible: This patch adds the IORESOURCE_RESERVE flag to the APIC and MMCONF resource flags to do this. I also added a new resource for the mapped bios rom area just below 4GB. I'm not sure if the choice for the index parameter of new_resource() is correct though. Note that the bios rom decode is enabled in src/southbridge/via/vt8237r/vt8237r_early_smbus.c for the whole 4MB area (even though the comment says 1MB). Ruik: I extended the flash range to 16MB (This is what VT8237S can decode) Remove the MMCONFIG region reserve in the mainboard file (this patch makes it obsolete) Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6083 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17This problem was introduced withTobias Diedrich
http://tracker.coreboot.org/trac/coreboot/changeset/3953 Note that all corresponding DSDTs only ever check TOM2 against 0. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17The only southbridge having a pirq_assign_irqs function (needed forTobias Diedrich
CONFIG_PIRQ_ROUTE) so far is the amd cs5530. Add one for vt8237 too. Setting up the pci routing is important in case you want to boot DOS, OSes that don't support ACPI or MP tables and ROMs for add-in storage controllers may depend on this too. TODO: Fix the 4 routing links limitation in src/arch/i386/boot/pirq_routing.c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6081 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Drop W83627THF, it's the same device as W83627THG.Uwe Hermann
The only difference is that the "G" version is in a Pb-free package, which is not relevant from a programmer's view. We keep W83627THG (and drop W83627THF) because: - The W83627THF had a CIR device / LDN which doesn't actually exist. - The W83627THF had no GPIO2, GPIO3 LDNs (were commented out). - The W83627THF didn't use the PNP_MSC0/1 which is needed/used by boards. This also fixes an issue on MSI MS7135's devicetree.cb: device pnp 4e.6 off end # XXX keep allocator happy The line above can be (and is) removed, as it was only needed due to the incorrect CIR LDN in the W83627THF. In the iwill/dk8x target: Drop incorrect LDNs 4 and 6, add 0xb. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6080 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Drop commented out debug definesPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6079 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Forgot to remove one set of SET_FIDVID definesPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6078 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Move the SET_FIDVID* family of configuration options to Kconfig andPatrick Georgi
make their defaults more obvious. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6077 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-15fix random breakageStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6075 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-15Move RCBA defines to northbridge (instead of mainboard)Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6074 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14Add a target for the ASUS A8V-E Deluxe (trivial).Uwe Hermann
For now this is a plain copy of the ASUS A8V-E SE target, I reported that most of the code also works (sort of) for the ASUS A8V-E Deluxe a long while ago, see http://www.coreboot.org/pipermail/coreboot/2008-March/031866.html http://www.coreboot.org/ASUS_A8V-E_Deluxe There will be a bunch of changes necessary though (devicetree.cb, mptable.c, ACPI, etc) which do not apply to the A8V-E SE, so we need an extra target. Also: Increase ID_SECTION_OFFSET on the VIA K8T890/K8M890 southbridge, as otherwise there will be build errors if the MAINBOARD_PART_NUMBER string gets too long (as is the case for "A8V-E Deluxe"). The error is: ld: section .id loaded at [00000000ffffffd2,00000000ffffffef] overlaps section .romstrap loaded at [00000000ffffff80,00000000ffffffd3] (both with stock Debian gcc and with xgcc) Increase ID_SECTION_OFFSET (default 0x10) to 0x80 as other southbridges do. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6072 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14CK804/MCP55 devicetree.cb cosmetic and indentation fixes.Uwe Hermann
Add a few more comments for the entries, and also change the devicetree.cb files to the more compact and better readable variant with indentation level of 2 spaces (instead of random mix of tabs and spaces). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6071 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14Return 0, (as for 40pin cable if SB not found)Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6070 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14Move cable detect logic to a weak function in vt8237r_ide.c and addTobias Diedrich
an override function in m2v/mainboard.c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6069 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-12mainboard/asus/m2v: Set DDR2 voltage to 1.8VTobias Diedrich
The power-on default is 1.95V, set the DDR2 voltage to standards-conforming 1.8V. I also measured with a multimeter to confirm this. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6066 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 20:32:55 +0000