summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Expand)Author
2010-06-07replace outb -> port 0x80 with post_code() in some places.Stefan Reinauer
2010-06-05Fix two warnings:Stefan Reinauer
2010-06-04Kconfig value is hex, not int.Myles Watson
2010-06-04128KB is the default, and isn't large enough with the 30K payload for abuild.Myles Watson
2010-06-04Fixes for Nokia IP530 and associated drivers.Marc Bertens
2010-06-01CONFIG_DEBUG is too generic. Remove it and replace it with CONFIG_DEBUG_SMBUSMyles Watson
2010-05-30This patch adds support for mainboard iBASE:MB899Bernhard M. Wiedemann
2010-05-25Move CS5535 specific setup from GX2 driver to CS5535. Stefan Reinauer
2010-05-25also rename the config option.Stefan Reinauer
2010-05-25fix most usbdebug warnings and fix function names.Stefan Reinauer
2010-05-25Long ago we agreed on kicking the _direct appendix because everything inStefan Reinauer
2010-05-25Fix usbdebug compilation.Stefan Reinauer
2010-05-21Add "reasonable" values in ASL at places we overwrite fromStefan Reinauer
2010-05-20Move generation of mptable entries for ISA to generic code.Patrick Georgi
2010-05-20Add support for the Traverse Technologies Geos mainboard.Nathan Williams
2010-05-16Following patch reprograms SIL3114 into PCI IDE native mode compatible class ...Rudolf Marek
2010-05-16Add support for the Getac P470 Stefan Reinauer
2010-05-16v2 -> v4Stefan Reinauer
2010-05-14ITE IT8671F: Add it8671f_48mhz_clkin().Anders Jenbo
2010-05-14Add initial support for the GIGABYTE GA-6BXE.Anders Jenbo
2010-05-14i945:Stefan Reinauer
2010-05-14Remove another set of includes from Fam10 romstages:Patrick Georgi
2010-05-14license header fixes Nils Jacobs
2010-05-14This patch cleanes up the Wyse S50 port and unifies the memmory regionsNils Jacobs
2010-05-09Remove pc80/serial.c includes in ROMCC boards and includePatrick Georgi
2010-05-08autoprobe apic cluster and application processors on K8 systemsStefan Reinauer
2010-05-08Add the Wyse S50 thin client to Coreboot.Nils Jacobs
2010-05-08Drop console/console.c and pc80/serial.c from mainboards'Patrick Georgi
2010-05-06Remove duplicate Kconfig entry. Trivial.Patrick Georgi
2010-05-05Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster"Patrick Georgi
2010-05-04Fix arima/hdama. It was changed to match newconfig, which was broken.Myles Watson
2010-05-03Qemu, despite "emulating" an intel chipset, uses the CMOS to Valdimir Serbinenko
2010-04-30Get rid of a few more warnings.Myles Watson
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
2010-04-25Fix the the build of r5494 on Asus A8V-E SE. The K8M890 and K8T890Rudolf Marek
2010-04-25try to unify timing initialization across those boards that need it...Stefan Reinauer
2010-04-25Following patch changes the K8M890 VGA handling. It reverts the framebuffer sizeRudolf Marek
2010-04-25no warnings days.Stefan Reinauer
2010-04-25zero warnings daysStefan Reinauer
2010-04-25Trivial. The comment also need to modify.Zheng Bao
2010-04-25The device number of SATA SB700 is 0x11, while the one of SB600 is 0x12.Zheng Bao
2010-04-24drop all duplicate copies of vgabios.c in favorStefan Reinauer
2010-04-23AMD Tilapia board support as a demonstration of an AMD Fam10 DDR3 board.Zheng Bao
2010-04-22via epia-m now works with default x86.c instead of its own copy of vgabios.c.Stefan Reinauer
2010-04-22zero warnings days...Stefan Reinauer
2010-04-22fix compilation remaining geode boardsStefan Reinauer
2010-04-21* clean up all but two warnings on artecgroup dbe61Stefan Reinauer
2010-04-20fix artecgroup dbe61Stefan Reinauer
2010-04-20As Myles suggested a while back: Switch long time #warnings to be commentsStefan Reinauer
2010-04-19Add support for the Nokia IP530.Marc Bertens
2010-04-16zero warnings days: unify mp tables. fix warnings.Stefan Reinauer
2010-04-15remove more warnings. move ROOT_COMPLEX selection to fam10Stefan Reinauer
2010-04-15don't leave VGA disabled by default on thomson ip1000Stefan Reinauer
2010-04-15zero warnings days...Stefan Reinauer
2010-04-15Remove a few more warnings from fam10.Myles Watson
2010-04-14zero warning days. Move RAMTOP and RAMBASE together.Stefan Reinauer
2010-04-14drop setup_ics code that was blatantly copied from cx700 and Stefan Reinauer
2010-04-14Remove few more warnings and some dead code.Myles Watson
2010-04-14geeesh! And this really compiles and even runs?Stefan Reinauer
2010-04-14udelay_tsc does not exist in the whole tree.Stefan Reinauer
2010-04-14drop quite a lot of dead code that did nothing but produce warnings and makeStefan Reinauer
2010-04-14zero warnings days. Down to under 600 different warnings Stefan Reinauer
2010-04-14fix digitallogic adl855pc compilation (and clean up the warnings while at it)Stefan Reinauer
2010-04-14move cpu/x86/car to cpu/intel/car as previously discussed on the mailing list.Stefan Reinauer
2010-04-13ip1000: fix seabios start, fix flash gpio detectionStefan Reinauer
2010-04-13fix timer choice in Kconfig. HAVE_INIT_TIMER is selected correctly, no need toStefan Reinauer
2010-04-13update atom car code in the same way that 6ex/6fx was updated.Stefan Reinauer
2010-04-13Fix eagleheights Stefan Reinauer
2010-04-12move model_6ex car to a single file. No more .c files that only consist of aStefan Reinauer
2010-04-12- move the XIP_ROM_* flags to src/cpu/x86/Kconfig exclusivelyPatrick Georgi
2010-04-11add int15 handler for thomson ip1000Stefan Reinauer
2010-04-11The ADL855PC was never confirmed working (in fact it's pretty sure that codeStefan Reinauer
2010-04-11add support for reading ip1000 gpios.Stefan Reinauer
2010-04-09We don't define LB_CKS_* per board anymore:Patrick Georgi
2010-04-09This patch changes C7 CAR code to be a single assembler file instead Stefan Reinauer
2010-04-09zero warning days.Stefan Reinauer
2010-04-09fix the broken nvidia chipset boards,Stefan Reinauer
2010-04-09zero warnings days.Stefan Reinauer
2010-04-09Drop the need for cpu_reset, it's really just a short cut to stage2.Stefan Reinauer
2010-04-09remove some amd mainboard warnings.Stefan Reinauer
2010-04-091. This patch adds CAR for Intel P6 series processors.Joseph Smith
2010-04-09copy_and_run.c is not needed twice, and it is used on non-car too.Stefan Reinauer
2010-04-09Copy acpi blobs in two parts to make sure gcc does the right thing.Myles Watson
2010-04-08Clean up fidvid files using indent.Myles Watson
2010-04-08Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so...Myles Watson
2010-04-08cpu/emulation/qemu-x86 doesn't exist anymore, as thisPatrick Georgi
2010-04-08Remove duplicate registers in digitallogic/adl855pc's device treePatrick Georgi
2010-04-07- copy_and_run() gets the same calling convention on AMD and on all the others.Stefan Reinauer
2010-04-07move amd K8/Fam10 "bus detection" function prototypes to a common place.Stefan Reinauer
2010-04-07clean up age old via epia target.Stefan Reinauer
2010-04-07drop the use of function pointers from romcc code.Stefan Reinauer
2010-04-07fix epia-m700 compilation, and remove more warnings.Stefan Reinauer
2010-04-07no duplicate names in cmos.layout.Stefan Reinauer
2010-04-07switch some ROMCC boards back to ROMCC.Stefan Reinauer
2010-04-07"no warnings day"Stefan Reinauer
2010-04-07oops... this is a critical issue. Some boards in the tree don't compile withStefan Reinauer
2010-04-07- unify use of SB_HT_CHAIN_UNITID_OFFSET_ONLYStefan Reinauer
2010-04-06No warnings day, next round.Stefan Reinauer
2010-04-05Signed-off-by: Rudolf Marek <r.marek@assembler.cz>Rudolf Marek
2010-04-03remove more warnings.Stefan Reinauer