aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-06-28amd/gardenia: Init cbmem in romstageMarshall Dawson
Change-Id: I6ede71ec660678bb5f77693a9095aa0f198e4e26 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-28mainboard/google/fizz: Add audio devicesKevin Cheng
- Describe RT5663 headphone codec in ACPI so it can be enumerated by the OS. - Supply NHLT binaries for RT5663 BUG=b:62872377 TEST=Apply full patch set and UCM, verify basic audio works. Signed-off-by: Kevin Cheng <kevin.cheng@intel.com> Change-Id: I5bbd58b0e660cdf5089e6a6dd35a757ecf8ec076 Reviewed-on: https://review.coreboot.org/20305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-27clang: Allow initializer overridesStefan Reinauer
In the code we do the following in a number of places to pre-initialize an array with a certain value before overwriting some of the array with other values: u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { [0 ... FCH_INT_TABLE_SIZE-1] = 0x1F, } clang does not like that behavior unless we specify the option -Wno-initializer-overrides. Remove the check for gcc in those places, too, because 1) it would silently change array contents between compilers 2) the check isn't sufficient to determine compilation on clang vs gcc Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: I93cc121b6fec099fcdbd5fd1114c2ff7cbc291dc Reviewed-on: https://review.coreboot.org/20384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-27mainboard/google/soraka: Update VR config settingsRajneesh Bhardwaj
Update Psi2Threshold, IccMax, AcLoadline, DcLoadline VR config settings as per board design. BUG=b:62063434 BRANCH=none TEST=Build and boot soraka. Change-Id: I254bbb88b82ddf278f0ec71bc98873df1d5e0d27 Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: G Naveen <naveen.g@intel.com> Reviewed-on: https://review.coreboot.org/20309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-27mb/google/soraka: Remove MPS IMVP8 workaroundRajneesh Bhardwaj
Soraka uses MPS2949 IMVP8 controller and does not need the VR workaroud similar to Eve. BUG=None TEST=Build & boot on soraka. Ensure IMVP8 controller goes to low power mode in S3 and S0ix by measuring power. Change-Id: Ib98bb709ecc9e362a5cef437e7319e41f398a73b Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Reviewed-on: https://review.coreboot.org/20255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-27vendorcode/amd: Unify Porting.h across all targetsStefan Reinauer
This requires to also unify the calling convention for AGESA functions from AGESA_STATUS (*agesa_func)(UINT32 Func, UINT32 Data, VOID *ConfigPtr) to AGESA_STATUS (*agesa_func)(UINT32 Func, UINTN Data, VOID *ConfigPtr) On systems running 32bit x86 code this will not make a difference as UINTN is uintptr_t which is 32bit on these machines. Change-Id: I095ec2273c18a9fda11712654e290ebc41b27bd9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-06-27mainboard/lenovo/x220: allow to use libgfxinitAlexander Couzens
Change-Id: I8b02596b116c0b164e83e7b02449c547224a50a6 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/20330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-27mb/google: Remove ChromeEC builds for auron and rambiMartin Roth
The ChromeEC board directories for auron and rambi have been removed from the latest version of ChromeEC. Remove them here so the submodule can be brought forward. Change-Id: I763d03009f735d3f8aedbeb44788d03714c86102 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27mainboard/google/poppy: Update world facing camera sensorV Sowmya
Update the world facing camera sensor to OV13858 and also add delay of 5ms after xshutdown rising which indicates system ready status. BUG=b:38326541 BRANCH=none TEST=Build and boot soraka. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successfull. Change-Id: I0cd535e6568f104ffaa1092a13667def646df0eb Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2017-06-27mainboard/google/poppy: Add clock frequency for camera sensorsV Sowmya
Add clock frequency property into _DSD ACPI object and set it to 19.2MHz for camera sensors. Upstream camera kernel has added a check for clock frequency in sensor probe function and without this property sensor probe fails. BUG=b:38326541 BRANCH=none TEST=Build and boot poppy. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successfull. Change-Id: I147b3c932a33ae034868f7f9b616500d24ca71e3 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20294 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2017-06-26amd/gardenia: Fix most checkpatch errorsMarshall Dawson
Correct all checkpatch errors but leave two errors in place that are caused by AMD typing. Change-Id: I9daa374da76ff991de72d16bad0e8b586aa95525 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26amd/gardenia: Switch to soc/amd/stoneyridgeMarc Jones
Switch Garnenia mainboard to single soc/ directory structure. Change-Id: I095804d603bcccf324d3244965081a9dccba62ae Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-23siemens/mc_apl1: Enable decoding for COM 3 on LPCMario Scheithauer
It does not work to enable the LPC range in the function mainboard_init() because the LPC bus driver closes the range during PCI enumeration again. For this reason, enabling decoding of the address range for COM 3 will be done at a later point in time - mainboard_final(). Change-Id: I452bca4e430b1ea75e4a327591da84500491fe84 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-06-23siemens/mc_apl1: Disable XDCIMario Scheithauer
With enabled XDCI support we are not able to use USB port 0 over XHCI driver. For this reason, we disable XDCI into devicetree.cb. Change-Id: I1ed721d9ffd44a920a6f1f16855d5b7ceb1b17c5 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-06-22mainboard/bifferos: remove bifferboardMartin Roth
This board can't be found to be tested, and compiles romstage with romcc. If desired, it can be continued in the 4.6 branch. Change-Id: I4826c277bbb444c2f0573729d76cd492ade95b4c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-20mb/google/poppy: Add camera devices power sequencing through ACPI power ↵V Sowmya
resources This patch controls the camera devices power through ACPI power resource. * Add Opregions for PMIC, * TI_PMIC_POWER_OPREGION * TI_PMIC_VR_VAL_OPREGION * TI_PMIC_CLK_OPREGION * TI_PMIC_CLK_FREQ_OPREGION * Add power resources for sensors and VCM, * OVTH for CAM0 * OVFI for CAM1 * VCMP for VCM * Implement _ON and _OFF methods for sensor and VCM module's power on and power off sequences. BUG=b:38326541 BRANCH=none TEST=Build and boot poppy. Dump and verify that the generated DSDT table has the required entries. Change-Id: I87cd0508ed5ed922211a51f43ee96b6f44cf673d Signed-off-by: V Sowmya <v.sowmya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/20054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-20mb/google/poppy: Configure ports and endpoints for sensor and CIO2 devicesV Sowmya
Bind the camera sensor and CIO2 devices through the ports and endpoints configuration available in _DSD ACPI object. * Port represents an interface in a device. * Endpoint represents a connection to that interface. BUG=b:38326541 BRANCH=none TEST=Build and boot poppy. Dump and verify that the generated DSDT table has the required entries. Change-Id: I6d822165bb9a0cd6f7d4cdcb36333887953110a3 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-20google/fizz: Enable onboard lanShelley Chen
Enable RT8168_GET_MAC_FROM_VPD in fizz Kconfig. BUG=b:62090148, b:35775024 BRANCH=None TEST=Boot to kernel. Insert mac address into VPD vpd -s ethernet_mac=<address> reboot the system. Ensure we have ip address and corresponding mac address with ifconfig. Ensure ethernet controller shows up with lspci. Change-Id: I00f63dcb56a2c9a4600c8461bc94e06ec5ab2d81 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/20232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-20google/fizz: Enable cr50 over SPIShelley Chen
By default disabled. Will need to add FIZZ_USE_SPI_TPM config to enable. BUG=b:62456589, b:35775024 BRANCH=None TEST=Reboot and ensure that TPM works in verstage CQ-DEPEND=CL:530184 Change-Id: I14ce73a1c3745c996b79c4d4758ca744e63a46b4 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/20134 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-20google/fizz: Enable cr50 over i2cShelley Chen
BUG=b:62456589, b:35775024 BRANCH=None TEST=Reboot and ensure verstage doesn't have any TPM errors CQ-DEPEND=CL:530185 Change-Id: Icfde0f62bd058d960fcb0c6fc67f9d8f6b9462f5 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/20133 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-19mb/google/poppy: Add MIPI camera support.V Sowmya
This patch adds mipi_camera.asl, * Add TPS68470 PMIC related ACPI objects. * Add OV cameras related ACPI objects. * Add Dongwoon AF DAC related ACPI objects. * SSDB: Sensor specific database for camera sensor. * CAMD: ACPI object to specify the camera device type. BUG=b:38326541 BRANCH=none TEST=Build and boot poppy. Dump and verify that the generated DSDT table has the required entries. Change-Id: If32a2a8313488d2f50aad3feaa79e17b1d06c80f Signed-off-by: V Sowmya <v.sowmya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-19mainboard/google/{poppy,soraka}: Remove MIPI camera support from devicetree.cbV Sowmya
Remove MIPI camera related register entries from devicetree.cb. BUG=b:38326541 BRANCH=none TEST=Build and boot poppy and soraka. Change-Id: Ic6a6a98d4c8ed6cba760eae5fd87bc2a3f15d7d2 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/19619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-19mainboard/emulation/qemu-i440fx/fw_cfg: Fix undefined behaviorRyan Salsamendi
Fixes 2 reports found by undefined behavior sanitizer. Dereferencing pointers that are not aligned to the size of access is undefiend behavior. Change-Id: Iaa3845308171c307f1ddc7937286aacbd00e3a10 Signed-off-by: Ryan Salsamendi <rsalsamendi@hotmail.com> Reviewed-on: https://review.coreboot.org/20155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-19mb/google/poppy: Add option to disable TPMNaresh G Solanki
Disable TPM when VBOOT_MOCK_SECDATA is enabled. BUG=None BRANCH=None TEST= Build image using USE="mocktpm" emerge-poppy coreboot depthcharge vboot_reference chromeos-bootimage . Verify boot is successful with mock tpm. Change-Id: Iee527ed17cffb7d25d9089e48a194d99ac8c3cd1 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-19google/oak: gpio: update RAM ID pins for RowanYidi Lin
RAMD_ID_1 moves to PAD_DSI_TE and RAM_ID_2 moves to PAD_RDP1_A on Rowan. BUG=chrome-os-partner:62672 BRANCH=none TEST=emerge-rowan coreboot Change-Id: Iae44934d8d669d696b83f9d3e3450a0e408fe062 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Gerrit-Rebase-Ignore-CLs-Before: https://chromium-review.googlesource.com/539234 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/388068 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/453778 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/454921 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/455118 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/479613 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/487023 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/498587 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/506785 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/520572 Original-Commit-Id: 4da19b3c00578f96ec933cff9ad0c9988a4c4a30 Original-Change-Id: I64fd29de607a0b360d355fd3724e3a649adc658b Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/448397 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-19rockchip/rk3399: fix DRAM gate training issueLin Huang
The differential signal of DQS needs to keep low level before gate training. RPULL will connect 4Kn from PADP to VSS and a 4Kn from PADN to VDDQ to ensure it. But if it has PHY side ODT connected at this time, it will change the DQS signal level. So it needs to disable PHY side ODT when doing gate training. BRANCH=None BUG=None TEST=boot from bob Change-Id: I56ace8375067aa0bb54d558bc28172b431b92ca5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: cb024042c7297a6b17c41cf650990cd342b1376f Original-Change-Id: I33cf743c3793a2765a21e5121ce7351410b9e19d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/448278 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/18582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-16purism/librem13v2: Fix HDA verb values, use azalia macrosMatt DeVillier
Use verb table values from AMI firmware, consolidate NID definitions using azalia macros. Fixes headphone jack detection and microphone. Change-Id: Ia31be6efc7afe921ad91b400f66694d951f0a260 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-16purism/librem13v2: Add audio supportYouness Alaoui
Initialize the audio codec without depending on DSP binary blobs. The hda_verb.c was copied from the intel/kblrvp rvp7 variant, and the hda_verb.h file was copied from the purism/librem13. The IoBufferOwnership FSP option in devicetree has to be 0 for the azalia driver to work. Change-Id: Ifa36ac0839daedfa59c497057da0ace04d401f2a Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-16purism/librem13: Disable L1 sub states supportYouness Alaoui
Some NVMe devices (Intel 600p series for example) seem to lock up in D3 drive power state (L1.2 PCIe power state). Disabling L1 substates fixes it. Change-Id: I00a327dc91d443beb565fe4e72aaf816e40a007c Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-16mb/lenovo/t430: Enable libgfxinitPatrick Rudolph
Enable libgfxinit. Tested on Lenovo T430: * LVDS * VGA * DP (using DP->HDMI adapter) All three ports are working. The LVDS port is garbled under linux when VGA or DP is connected, likely due to missing VBT. Change-Id: I665661e93724072d1e8412cfcc0e818f824c8cb0 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-16google/parrot: use a GNVS variable to specify trackpad interruptMatt DeVillier
Use a GNVS variable to store the trackpad interrupt, in order to support both SNB and IVB variants from a single build. Change-Id: I53df35fff41f52a7d142aea9b1b590c65195bcfd Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-16purism/librem13v2: Fix EC_SCI_GPI valueMatt DeVillier
Existing value was copied from librem13 v1 board, use value obtained from AMI firmware. TEST: Observe Windows boots correctly, function keys work under both Windows and Linux. Change-Id: I0ea6cc4602ce1047cb803acc65cbca1af1f480b0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-16purism/librem13v2: Add Kconfig defaultsYouness Alaoui
Add default values for MAINBOARD_VERSION and CBFS_SIZE. Change-Id: Ib6461cef78f3fea448baf1ada456e3c8335f1543 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2017-06-16purism/librem13v2: Clean up devicetreeMatt DeVillier
- remove unused I2C, serialIO defs - set PL2 override, VR mailbox cmd based on SKL-U ref board, as values copied from google/chell are for SKL-Y Change-Id: I3a138c28d0322df6cb41ec1a845ae31602cb69a7 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-16purism/librem13v2: Update USB configMatt DeVillier
Update devicetree USB config based on board spec. Leave OC pins set to skip since the info is unavailable. Change-Id: I2a4fe17ed7edacbbbaf56969f9d2801b45a20da9 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-16google/slippy: Don't force native graphics initPatrick Georgi
The board dutifully registers an int15h handler and provides the defaults to add a VGABIOS. That should be good enough to initialize graphics through the VGABIOS file. Fixes build on Chrome OS configurations (at least until the Ada toolchain situation is resolved over there). Change-Id: I1d956b5a163b7cdf2bd467197fba95f16e5e8fa3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2017-06-15google/gru: drive the stronger pull-up for touchpadCaesar Wang
As the hardware designed on gru, the AP_I2C_TP_PU_EN (gpio3_b4) controlled the SCL/SDA status to avoid leakage. And the gpio3_b4 of rk3399 pull resistor is 26k~71k and 3.3v for supply power, and gpio3_b4 pin connected 2.2k resistor to i2c of TP device. The default of this gpio status is pulled up during the start to bootup, it's very weak drive for the TP device that maybe cause to trigger the recovery process of elan's firmware. Also, the Elan updated its firmware(102.0.5.0) to delay checking the i2c of touchpad is greater than 1 second. So we have to drive the stronger pull-up within 1 second of powering up the touchpad to prevent its firmware from falling into recovery. Change-Id: I9a67d1c041afafde24ed9f00716ba41a9b41a8da Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-06-15nb/intel/gm45: Don't allow too low values for gfx_uma_sizeArthur Heymans
Too low gfx_uma_size can result in problems if the framebuffer does not fit. This partially reverts: 7afcfe0 "gm45: enable setting all vram sizes from cmos" Change-Id: I485d24198cb784db5d2cfce0a8646e861a4a1695 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-14mainboard/google/{poppy,soraka}: Disable unused GSPI1 interfaceFurquan Shaikh
TEST=Verified that board still boots to OS without any error. Change-Id: I02d2a6cbcab92766a35993bfd20aaeed4ca22c90 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-14mainboard/google/{poppy,soraka}: Enable generation of SPI TPM ACPI nodeFurquan Shaikh
Now that we dynamically disable TPM interface based on config options, add support for generation of SPI TPM ACPI node if SPI TPM is used. Change-Id: I87d28a42b48ba916c70e45a061c5efd91a8a59bf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-14mainboard/google/poppy: Disable unused TPM interface dynamicallyFurquan Shaikh
Based on the config options selected, decide at runtime which TPM interface should be disabled so that ACPI tables are not generated for that interface. TEST=Verified that unused interface does not show up in ACPI tables. Change-Id: Iee8f49e484ed024c549f60c88d874c08873b75cb Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20141 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-13Consolidate reset API, add generic reset_prepare mechanismJulius Werner
There are many good reasons why we may want to run some sort of generic callback before we're executing a reset. Unfortunateley, that is really hard right now: code that wants to reset simply calls the hard_reset() function (or one of its ill-differentiated cousins) which is directly implemented by a myriad of different mainboards, northbridges, SoCs, etc. More recent x86 SoCs have tried to solve the problem in their own little corner of soc/intel/common, but it's really something that would benefit all of coreboot. This patch expands the concept onto all boards: hard_reset() and friends get implemented in a generic location where they can run hooks before calling the platform-specific implementation that is now called do_hard_reset(). The existing Intel reset_prepare() gets generalized as soc_reset_prepare() (and other hooks for arch, mainboard, etc. can now easily be added later if necessary). We will also use this central point to ensure all platforms flush their cache before reset, which is generally useful for all cases where we're trying to persist information in RAM across reboots (like the new persistent CBMEM console does). Also remove cpu_reset() completely since it's not used anywhere and doesn't seem very useful compared to the others. Change-Id: I41b89ce4a923102f0748922496e1dd9bce8a610f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19789 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-13siemens/mc_apl1: Enable decoding for COM 3 on LPCMario Scheithauer
Since this mainboard provides 3 COM ports on LPC, enable decoding of the corresponding address range for COM 3. Change-Id: I15c0748fce67eef46401c314f441aa45f5e3c5fa Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-06-13siemens/mc_apl1: Use Siemens NC FPGA driverMario Scheithauer
- use Siemens NC FPGA driver for backlight brightness and PWM control - set Dsave time for board reset after falling edge of signal xdsave Change-Id: I5077d4af162e54a3993e5e0d784a8356f51bd0c9 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-12nb/intel/gm45: Add romstage timestampsArthur Heymans
Change-Id: I558e6c63caf95ec5279ec5a866b54fb199116469 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-06-12mb/foxconn/g41s-k: add new mainboardSamuel Holland
Based on the Intel G41 chipset, ICH7 southbridge, and IT8720F Super I/O. Tested, working: * Booting Linux 4.11.3 and Windows 8.1 from USB and HDD * Resume from S3 (Linux and Windows) * Native raminit (DDR2-800) * Native graphics init (SeaBIOS, Linux) * Graphics init with VGA BIOS (SeaBIOS, Windows) * PCI-E x16 PEG slot, PCI-E x1 slot from southbridge * Realtek ALC888 HD Audio (including front panel and jack detection) * Realtek R8168 Gigabit LAN * Both SATA ports * USB 1.1 and 2.0 devices (keyboard, mass storage) * PC speaker beep * COM header * Super I/O Environment controller (temps, voltage, fans) * PS/2 keyboard and mouse * Flashing with `flashrom -p internal` * 1MiB and 2MiB SPI flash chips * CMOS gfx_uma_size Appears, OS driver loads, but otherwise untested: * IrDA header * CIR header * TPM header Untested: * S/PDIF digital audio Tested, known broken: * CMOS power_on_after_fail * USB keyboard in secondary payloads Change-Id: Ifc4c8935b1a11e55f4bf6cfa484a8a8d09b1adda Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/20027 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-12mb/emulation/spike-riscv: Update UART addressJonathan Neuschäfer
I updated my spike patch[1] to cleanly apply to current spike master. As a side effect, the UART is now at 0x02100000. [1]: https://github.com/riscv/riscv-isa-sim/pull/53 Change-Id: I4cb09014619e230011486fa57636abe183baa4be Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/20126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-06-12soc/baytrail: fix scope for I2C ACPI devicesMatt DeVillier
For an unknown reason, the I2C ACPI devices were placed under \SB intead of \SB.PCI0, as with all other non-Atom based Intel platforms. While Linux is tolerant of this, Windows is not. Correct by moving I2C ACPI devices where they belong. Also, adjust I2C devices at board level for google/rambi as to not break compilation. Change-Id: I4ef978214aa36078dc04ee1c73b3e2b4bb22f692 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20056 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-09mb/asrock/g41c-gs: Rename the board to G41C-GS R2.0 (g41c-gs_r2_0).Bill XIE
The supported "G41C-GS" with a nuvoton nct6776 superio is actually G41C-GS R2.0, which is different with the more easily-found revision G41C-GS (R1.0) with Winbond W83627DHG superio, and should be ported separately. Photos for the two revision: R1.0: https://web.archive.org/web/20160915160553/http://www.asrock.com/mb/photo/G41C-GS(L1).jpg R2.0: https://web.archive.org/web/20160717203810/http://www.asrock.com/mb/photo/G41C-GS%20R2.0(L2).jpg Change-Id: If60a694bcf0652ab32c0ac75ceec7e27e11fe9eb Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/19980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-09purism/librem13v2: Update PCI configYouness Alaoui
Update devicetree PCI config based on board spec: - enable PCIe Root Ports 5 and 9 (wifi and nvme respectively) - enable PCIe CLKREQ on RP9, disable on RP5 - enable USB OTG - enable P2SB Note: PCIe RP5 is on 0.1c.0 despite this being labeled as RP1 Change-Id: Ia71ed25bd41668df1ee3e4b4e28f54482722452c Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-09purism/librem13v2: Don't disable PM timerMatt DeVillier
Needed for UEFI booting via Tianocore; with PM timer disabled, payload hangs. Change-Id: I6c65cb9d3e6a10baea4cc1e2d9e94c36fe419561 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-09purism/librem13v2: Enable SATA, disable eMMC supportYouness Alaoui
Change-Id: Ib63e5e8a1bcbc25c288dec7d1ef6c06239ada34b Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-09purism/librem13v2: Add microcode values in KconfigYouness Alaoui
The FSP Temp RAM init will fail if the mircocode values are set to 0. A valid microcode update needs to be included and its size and offset need to be set in the config. Change-Id: I26d05bd7b37c8d91bf34f399c7c4189f9d3dd34a Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19936 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-09purism/librem13v2: Add memory init codeYouness Alaoui
Adding code to setup the spd information from sodimm. Adapted from intel/kblrvp. Change-Id: I0403f999dac1bdef0e9e1abe7c9c62407e223bb1 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-09purism/librem13v2: Add GPIO pad configurationYouness Alaoui
The GPIO configuration matches the one from the original BIOS. Some configs don't make much sense, but I kept it as is so it would match (such as a NC pin with TX set to 1, or RXINV enabled). Remove unnecessary early GPIO config. Change-Id: Iaec8630cef9a523fb2e2503143aa4aa72fbedc1f Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19934 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-09purism/librem13v2: Select SERIRQ_CONTINUOUS_MODEMatt DeVillier
Like other devices using ENE embedded controllers, the librem13v2 requires this config option for the PS2 keyboard and mouse (trackpad) to function properly. Change-Id: Ifba13b93a1fe2e76b2790d1c273fd9e2b5368ab0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-09purism/librem13v2: Add initial directory for librem13 v2Youness Alaoui
Add the initial directory for the port of the Librem 13 v2. The base implementation was copied from the google/chell directory and the chell references were replaced. spd directory was removed since the RAM is not soldered on the MB. The Kconfig, board_info.txt and devicetree.cb files were modified to match the Librem 13 v2 hardware information. The romstage.c, mainboard.c, Makefile.in and dsdt.asl were modified to remove chromeos specific code. The boardid.c, chromeos.c, chromeos.fmd, cmos.layout, ec.c, ec.h and smihandler.c files were removed from the tree, and the acpi directory was replaced with the acpi directory from the purism/librem13 board. These changes allow us to remove the references to chromeos specific code and allow coreboot to compile when the librem13v2 board is selected. Change-Id: I24263fde18fcea70163dbdc59df6ea1d98c97af8 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-09purism/librem13v1: Set FADT revision to ACPI 3.0Matt DeVillier
The FADT revision was set to 5, but we do not implement the ACPI v5.0 specification, which prevents Windows from booting. Setting it to v3 (matching most other boards) fixes the issue and Windows now boots normally. Bug found by Matt DeVillier, fix tested by Youness Alaoui on Librem 13 v1 hardware. Please also see commits 00d250e2289de (intel/skylake: Switch FADT to ACPI version 3.0) [1] and 27e6042bb7d0b1 (intel/apollolake: Switch FADT to ACPI version 3.0) [2]. [1] https://review.coreboot.org/19453 [2] https://review.coreboot.org/19146 Change-Id: Ide97cbf64f7b05018433436431ab4723b217fe22 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-09purism/librem13v1: Rename librem13 to librem13v1Youness Alaoui
A simple rename of the directory and the config values and string in Kconfig/Kconfig.name/board_info.txt It will be less confusing for users since the first models are referred to as 'v1' everywhere now. Change-Id: I23fa977717230c2001868741bb684e9633a2c0bb Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19931 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-09soc/braswell: fix scope for I2C ACPI devicesMatt DeVillier
For an unknown reason, the I2C ACPI devices were placed under \SB intead of \SB.PCI0, as with all other non-Atom based Intel platforms. While Linux is tolerant of this, Windows is not. Correct by moving I2C ACPI devices where they belong. Also, adjust I2C devices at board level for intel/strago and google/cyan as to not break compilation. Change-Id: Iaf8211bd86d6261ee8c4d9c4262338f7fe19ef43 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20055 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-09google/chell: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Change-Id: Ie0b64eadc634049f6b65cf555407337fb7c4363c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-09cpu/intel/model_206ax: Use tsc monotonic timerPatrick Rudolph
Switch from lapic to tsc. Allows timestamps to be used in coreboot, as there's a reference clock available to calculate correct time units. Clean Kconfig, remove duplicated lapic code and include tsc dir for LGA1155 boards. Tested on Lenovo T430. Change-Id: I849ca2b3908116d9d22907039cd6e4464444b1d1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-09mb/google/soraka: Update UF camera i2c addressNaresh G Solanki
Update user facing camera i2c address to 0x36. BUG=None TEST=Build & boot on soraka. Make sure user facing camera is detected. Change-Id: I4645ae5734faef4b6a821c04ab817a7b99da6e4b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-06-08fsp/gop: Add running the GOP to the choice of gfx initNico Huber
The new config choice is called RUN_FSP_GOP. Some things had to happen on the road: * Drop confusing config GOP_SUPPORT, * Add HAVE_FSP_GOP to chipsets that support it, * Make running the GOP an option for FSP2.0 by returning 0 in random VBT getters. Change-Id: I92f88424004a4c0abf1f39cc02e2a146bddbcedf Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-08device/Kconfig: Put gfx init methods into a `choice`Nico Huber
Provide all gfx init methods as a Kconfig `choice`. This elimates the option to select native gfx init along with running a Video BIOS. It's been only theoretically useful in one corner case: Hybrid graphics where only one controller is supported by native gfx init. Though I suppose in that case it's fair to assume that one would use SeaBIOS to run the VBIOS. For the case that we want the payload to initialize graphics or no pre-boot graphics at all, the new symbol NO_GFX_INIT was added to the choice. If multiple options are available, the default is chosen as follows: * NO_GFX_INIT, if we add a Video BIOS and the payload is SeaBIOS, * VGA_ROM_RUN, if we add a Video BIOS and the payload is not SeaBIOS, * NATIVE_VGA_INIT, if we don't add a Video BIOS. As a side effect, libgfxinit is now an independent choice. Change-Id: I06bc65ecf3724f299f59888a97219fdbd3d2d08b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-08device/Kconfig: Introduce MAINBOARD_FORCE_NATIVE_VGA_INITNico Huber
MAINBOARD_FORCE_NATIVE_VGA_INIT is to be selected instead of the user option MAINBOARD_DO_NATIVE_VGA_INIT. The distinction is necessary to use the latter in a choice. Change-Id: I689aa5cadea9e1091180fd38b1dc093c6938d69c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-07mainboard/google/poppy: Add support for ELAN deviceFurquan Shaikh
Add support for ELAN 5515 device. BUG=b:62331218 Change-Id: Id91a41743330c9e356293cfda7b2e3743dcd480c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20040 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-07src: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-07Use more secure HTTPS URLs for coreboot sitesPaul Menzel
The coreboot sites support HTTPS, and requests over HTTP with SSL are also redirected. So use the more secure URLs, which also saves a request most of the times, as nothing needs to be redirected. Run the command below to replace all occurences. ``` $ git grep -l -E 'http://(www.|review.|)coreboot.org' | xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g' ``` Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/20034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-07via/epia-m700: Wrap long line in commentPaul Menzel
Wrapping the long line tries to address a warning by `checkpatch.pl`, but the line is still over 80 characters long. Change-Id: Ib75d4da1880624eb83f7a419cb6762f1c4c2a7b2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/20033 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-06asus/kgpe-d16: Add video card ID for VGA BIOS namePaul Menzel
The comma-separated PCI vendor and device ID is used to associate the VGA BIOS to the video device by using it as the file name of the VGA Option ROM. Change-Id: I755554eeb9a560d034d6e8fe49de619d800ea045 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/18741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-06mb/*/*/cmos.layout: Make multibyte options byte alignedArthur Heymans
Changes the offsets of some options so that options that span multiple bytes are byte aligned. To make the cmos.layout file more consistent some things where moved around in the cmos.layout of thinkpads X200 and T400. Change-Id: Ic84a2a5dc6f9c102f041085871c2ed55e2f3692a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-05google/reef: Add coralPatrick Georgi
A new variant copied from reef. Allow override of the SKU. Change-Id: Ibe160e75aa23623812f0fb9121d1d8226afc00d8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20020 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-04google/rambi: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Each rambi variant has a different USB port config. Port data currently available for only candy and squawks; other variants to be added once data obtained. Change-Id: If7ce3d135d6ffe53ab1566d5258d01b052ac47f4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04google/jecht: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Each jecht variant has a different USB port config. Change-Id: I3b15aac9c4971e2ae230106016fba3a583ec6c9a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04google/auron: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Each auron variant has a different USB port config. Change-Id: Id17f21c23540d2e3d5a902a2174b66c7a5a5f3e0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04google/slippy: populate PEI SPD data for all channelsMatt DeVillier
Since dual-channel setups use same RAM/SPD for both channels, populate spd_data[1] with same SPD data as spd_data[0], allowing info for both channels to propogate into the SBMIOS tables. Clean up calculations using SPD length to avoid repetition. Changes modeled after google/auron variants. Change-Id: I7e14b35642a3fbaecaeb7d1d33b5a7c1405bac45 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-04google/parrot: make chromeos.c compilation conditional on CONFIG_CHROMEOSMatt DeVillier
No reason to compile/include chromeos.c for non-ChromeOS builds Change-Id: Ie8ef1f4c521b2a7308941299f2501073937bdf4a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04google/lulu: enable SATA device to sleep in S0Matt DeVillier
sata_devslp_disable was set to work around some buggy SSD firmware, but as it's disabled by default in both Linux and Windows, no reason to disable at the firmware level when many properly-functioning SSDs can take advantage of power savings. Change-Id: Ib15f8b51db19b3d9d2e135f85c71a15a45a2ffbd Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04mb/google/poppy: Update camera sensorNaresh G Solanki
Update camera sensor detail to OV 13858 Also update i2c address of OV5670 BUG=None TEST= Build & boot to ChromeOS. Check for both the camera detection. Change-Id: I3b6192815201f605d3ebdb4bf54db26a8e837b35 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-03mb/lenovo/*/cmos: Remove unused option and checksum fixPatrick Rudolph
Fix for all Sandy-Bridge and Ivy-Bridge devices. Remove unused option "hyper_threading". Increase CMOS checksum range to cover all user adjustable settings. Change-Id: I02f7af13d9c82d7f531d4b49b3bc0e5a20c14b55 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-03mb/google/fizz: set SD_CDZ to edge trigger.Kane Chen
This is to align with the SD_CD GpioInt setting in acpi BUG=b:62067569 TEST=checked unused interrupt on SD_CD does not happen after s3 resume Change-Id: I40aefcb0f571e7f6773a6d20226f357707aa041a Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/20001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
Like HAVE_VGA_TEXT_FRAMEBUFFER, these are selected by graphics drivers that support a linear framebuffer. Some related settings moved to the drivers (i.e. for rockchip/rk3288 and nvidia/tegra124) since they are hardcoded. Change-Id: Iff6dac5a5f61af49456bc6312e7a376def02ab00 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02Kconfig: Rework MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFGNico Huber
* Rename it to HAVE_VGA_TEXT_FRAMEBUFFER. * Let drivers select it if they are in charge. * Don't select it on the mainboard level if a driver handles it. Change-Id: I2d9d09be9aa6d019e77460e69a245ad2d8cda4ea Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02intel/bakersport_fsp: Move into bayleybay_fsp as a variantMartin Roth
The separate directory was the old way of handling variant boards. Update bakersport_fsp to the new method. All of the other pieces were already moved into bayleybay_fsp. Change-Id: I5712c1b399570bd7ab7fc9e42af25fbf15a0ba78 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/19077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-02google/rambi: disable PCI device for unused i2c busesMatt DeVillier
Light sensor isn't used and ACPI already removed, so disable I2C5 bus interface as well. Disable I2C6 for devices without a touchscreen Change-Id: Ib0e041ae9131615ef1140bad064de5aae91f8ee4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-02mainboard/*/*/Kconfig: Remove MONOTONIC_TIMER_MSR selectionAamir Bohra
Remove MONOTONIC_TIMER_MSR selection from mainboard Konfigs, as it only does a reduntant selection of HAVE_MONOTONIC_TIMER config, already selected under skylake soc Kconfig. Change-Id: Ib3177ceb9e8b6c16ce0e437a4a02b94f215af58f Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/20002 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-02mb/intel/d410pt: Add mainboardArthur Heymans
This board is almost identical to D510MO, the only differences are some differences in populated connections, CPU with less L2 cache and a 10/100 Realtek NIC. The vendor uses the very same binary for both D510M0 and D410PT. Change-Id: I220515365b69e785ef249c4e3a9af5f7fddf02f9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-01mainboard/google/poppy: Enable H1 I2C TPMFurquan Shaikh
Enable H1 I2C TPM in Kconfig and devicetree for poppy. CQ-DEPEND=CL:513513,CL:*381534 BUG=b:36265511 BRANCH=None TEST=Compiles successfully. Change-Id: I4c6c94fa05abf9f5374505ded5956e879ac79726 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicolas Boichat <drinkcat@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-31mainboard/google/poppy: Power down camera rails when suspendingFurquan Shaikh
BUG=b:62147763 Change-Id: Iba88fed972b847448e01fcfca8c7129d950244c2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-31google/slippy: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Each slippy variant has slightly different USB port config; data for falco and leon to be added once available Change-Id: Icc3b5b1161f62ac0b840380679acafeff363cf45 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31google/beltino: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. All beltino variants use the exact same USB port layout. Change-Id: If5b540949ea071f7165876e12ac1ef50e62d2b22 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31google/parrot: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Move inclusion of mainboard.asl after southbridge asl files so scopes referenced in usb.asl are valid. Change-Id: I58ea0b43f7f2c2692630df3bdb06af92566c1202 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31mb/lenovo/t430: Fix PCIe hot-plug portsPatrick Rudolph
Port 0 is connected to SD-card reader. Don't mark it as hot-plugable. Change-Id: I5d3d4c7541683a6c09aac47ca251a6dad23ad1ab Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-31mc_tcu3: Remove all hwinfo files from mainboard directoryWerner Zeh
To unify the hwinfo handling along all Siemens MC boards the hwinfo files have to be removed from the mainboard directory. They will be added to cbfs in site-local/Makefile.inc. Change-Id: Ia3dcb2e0118527b37aed872740273c4fa7004aef Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-05-31mc_bdx1: Switch to RTC RX6110SAWerner Zeh
The prior used RTC PCF8523 is replaced with RX6110SA on this mainboard. Switch to the new RTC in Kconfig and adapt devicetree to the new chip. Change-Id: I7c4911191cae254900f9a958da42ecd18497484c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-05-31mb/google/eve: Update thermal tuning parametersDuncan Laurie
Modify the DPTF configuration on Eve to relax the severe throttling that is currently applied and allow performance testing to see better results. BUG=b:35581264 TEST=performance tests show better results and thermal tests still pass. Change-Id: I0838f4ec3026bc8bac814698043fa97cf6772cb4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-31mb/google/eve: Add power controls to touchscreen deviceDuncan Laurie
Instead of having the SMI handler power off the touchscreen on the way into suspend add power resource controls to the ACPI device so the power is managed by the kernel instead of the BIOS. BUG=b:35581264 TEST=manual testing on Eve to ensure that the touchscreen is still functional at boot and after suspend/resume, and that it does not draw power in suspend. Change-Id: Id9a98807d24bbc7dff32408f3d113f6fad5bc023 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-30tegra210: Remove fake cpu_reset()Julius Werner
The Tegra210 SoC never had a proper cpu_reset() implementation, so it's pointless to pretend there is one. Most ARM SoCs/boards only define hard_reset() at the moment anyway, so let's stick with that. Change-Id: I40f39921fa99d6dfabf818e7abe7a5732341cf4f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-27mb/lenovo/*/smihandler: Get rid of mainboard_io_trap_handlerPatrick Rudolph
Get rid of mainboard_io_trap_handler. The only purpose is to enable tp-smapi, but is already done on all boards in h8_enable, as of devicetree setting config0. Change-Id: I33fd829a7e34aefa8f76ca6020cc8e802f7aab17 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>