summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-07-18mb/*/*/gpio: Use static for const structuresPeter Lemenkov
Autoport generates these structures as static so let's make it consistent. See also commit 128205fd with Change-Id I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 ("autoport/bd82x6x.go: Improve gpio.c generation"). Change-Id: I4e07bd755ca4a65b76c69625d235a879fe7b43cb Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33524 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18mb/google/hatch: Add FP MCU to kohaku device treeShelley Chen
BUG=b:137654283 BRANCH=None TEST=Make sure can see FP MCU spidev in dmesg on bootup Change-Id: Iffa13f29e1abdf430e8dc4a0ee1a931a9e69168c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34371 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18mb/esd/atom15/gpio.c: fix whitespaceAngel Pons
Tabs, tabs, tabs... Change-Id: I65c0918957a571aaa6f49d884625af337fb2ad7c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-07-18mb/siemens/{mc_apl1,...,mc_apl5}: Fix GPIO settingsMario Scheithauer
Correct all GPIOs with reference to the Apollo Lake SoC EDS Vol 4 revision 2.4 chapter 10.1.2.3 List of Pins that are GPIOs but cannot be used in Function 0 (GPIO) mode. In additional, set an internal pull to any GPI that does not have an external resistor so that the input is not in an undefined state. Change-Id: Ia8fe457eddbed0f4ee6bff9ef9dd7a92545be40b Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
2019-07-18mb/siemens/mc_apl1: Disable all UHS-I SD-Card speed modesMario Scheithauer
The limitation for SD-Card was originally only made for mc_apl2 mainboard. Since other mc_apl mainboards also use the SD-Card interface, the speed mode setting is made in the parent mainboard_final. In additional, all UHS-I bus speed modes are disabled because of a limitation for industry use cases. This means that only HS mode is permitted. Change-Id: I2f1b51f13a53c2507c52d6a169d6384b8570b3bc Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-18mb/google/hatch: Disable wireless chargingSubrata Banik
This patch makes VGPIO_3 GPIO PIN output and low independent of cnvi is connected or not. BUG=b:123062346 BRANCH=None TEST=boot up Hatch device and make sure VGPIO_3 gpio pin is driven low. Change-Id: I629b99676f56747de1b244724709e14069250097 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34376 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-17lib: Remove the BOOTBLOCK_CUSTOM compile guardAsami Doi
This CL allows that everyone can use main() in lib/bootblock.c even if you select CONFIG_BOOTBLOCK_CUSTOM. I also rename main functions used in some soc/ to avoid the collision with the main function defined at lib/bootblock.c. Change-Id: I0575c9d1ce9dea9facfcc86760dff4deee9c1e29 Signed-off-by: Asami Doi <d0iasm.pub@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34250 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-17mainboard/portwell/m107: Do initial mainboard commitFrans Hendriks
Initial support for Portwell PQ7-M107 (Q7) module. Code based on Intel Strago mainboard. BUG=N/A TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107 Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-16mb/google/hatch: Disable Bluetooth in bootblock and enable in ramstageShelley Chen
Currently, bluetooth FW is not loaded after a reboot. In order to do this, we have to disable the bluetooth disable gpio (GPP_C14) in bootblock and re-enable it in ramstage. BUG=b:137307516 BRANCH=None TEST=boot up Hatch device and make sure (in dmesg) that proper bluetooth FW in loaded Change-Id: Ic5e447d9de57790f7a100e9e03f36b047c19d8f9 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34354 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-16mb/google/octopus/variants/garg: support LTE power sequenceMarco Chen
GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:137033609 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Change-Id: I7bf6fee087c885c22363b44aa98aa61f91be90b4 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-16mb/google/octopus: add variant_smi_sleepMarco Chen
Allow variants to customize their own smi sleep flow. BUG=b:137033609 BRANCH=octopus TEST=built Change-Id: I75db544d333a640848da9072878687c802c1c1a4 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34340 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-16mb/google/octopus: add variant_early_override_gpio_tableMarco Chen
Allow variants to override GPIO configurations of baseboard in the bootblock stage. BUG=b:137033609 BRANCH=octopus TEST=built Change-Id: I18d380cdf58f0f24e1bb1bff394ed8a91188a22c Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-16mediatek/mt8183: add a new configuration for KodamaPeichao Wang
These configuration files can be used to build Kodama firmware. BUG=b:135490566 TEST=check variant: kodama via make menuconfig; make -j Change-Id: I72e80e800ba041df1dda2b0f84470d1ef58bc946 Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33616 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-15mb/google/sarien/variants/arcada: Set data hold time for touchpadCasper Chang
Elan's touchpad requires min 0.3us data hold time. To fine tune the data hold time of i2c1 to meet specification of Elan's touchpad. BUG=None BRANCH=None TEST=Verified data hold time of i2c1 is around 320ns Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I0fa9db3b50e74f193261be96bd9e305bb19841e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Crews <ncrews@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-07-13mb/up/squared: Enable VtdFelix Singer
Change-Id: Ie935f98f84772a53de92f0dd2d13a381f5dbaf89 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-07-13mb/google/hatch: Fix trackpad configuration in overridetreeFurquan Shaikh
Hatch and variants use GPP_A21 for trackpad IRQ and wake. Fix overridetree.cb to advertise the right IRQ. Change-Id: Ib87c858b89e8726c3bc80f83be0729ef4625268e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34248 Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-13mb/google/octopus: Add custom SAR values for BluebirdSeunghwan Kim
Bluebird needs to use different SAR values than Casta. Bluebird sku id is 2. CQ-DEPEND=CL:*1435310 BUG=b:129725065 BRANCH=octopus TEST=build Change-Id: I107a8519832fcf906b94f958a3dc508d19bb4727 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34080 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-13intel/i945: Fix udelay() prototypesKyösti Mälkki
Change-Id: Ia157c6417bdd9c4ffbdf07683c51d0680e9356c9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-13intel/haswell: Replace monotonic timerKyösti Mälkki
Remove implementation of 24 MHz clock, available only on Haswell ULT SKUs. Use TSC_MONOTONIC_TIMER instead for all boards. Change-Id: Ic4aeb084d1b0913368f5eaa46e1bd68411435517 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-12mb/siemens/mc_apl3: Enable LPSS UART 1Mario Scheithauer
By setting the GPIOs 42 and 43 to native function 1 the LPSS UART 1 is activated. Change-Id: I74abd1b6fb5459cf11a5bdee182c99462f613b7a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-12device/pci: Replace use of dev_find_slot() for IRQsKyösti Mälkki
Change-Id: I48c0de73338430282ce1a4442bbeb7c867dc174c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-11mb/google/hatch: Update AC/DC loadline valuesRizwan Qureshi
Update the AC/DC loadline values for all domains. Using the same values as in arcada. BUG=None BRANCH=None TEST=Build and Boot hatch EVT Change-Id: If8ea48794d11dc68e40e6504c0d46a2b273a8ab6 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-11mb/asus/p8h61-m_pro: Add comment about PCH GPIO46Angel Pons
GPIO46 is wired to a tiny switch on the board labelled "GPU Boost". Since coreboot could make use of it, add a comment about it on gpio.c. Change-Id: I0efa85e6d8235711521b10e56b7c89a25c4b2b7f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-11mb/siemens/{baseboard,mc_apl3,mc_apl4,mc_apl5}: Fix GPIO_168Mario Scheithauer
This GPIO is corrected with reference to the Apollo Lake SoC EDS Vol 4 revision 2.4 chapter 10.1.2.3 List of Pins that are GPIOs but cannot be used in Function 0 (GPIO) mode. Change-Id: I98628ade3a1e19730ca6e6b4a63c28e6816176ce Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-11mb/siemens/{mc_apl1,...,mc_apl5}: Reduce eMMC bus speed modeMario Scheithauer
We need to reduce the eMMC bus speed for these Apollo Lake mainboards because of a limitation on Intel side for industry use cases. Change-Id: Ide6a1a302001c0752d149bfdab175a27c8f8cc35 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-11google/kukui: Adjust LCM ID voltagesYu-Ping Wu
Currently some of the LCM ID voltage gaps are below 100mV. For example, the voltage difference between ID 2 and 3 is 503-440=63mV. To reduce the risk of misrecognition from the hardware level, the voltages are adjusted so that all the voltage gaps are larger than 100mV. The RD2 resistor values are also updated. BUG=b:136987483 TEST=emerge-kukui coreboot Change-Id: Ib5c1f927fb54d8c9579f030e42eeec5a27daaceb Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34192 Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11board/kukui: Remove ADC tolerance from boardidHung-Te Lin
The tolerance of ADC is +-10mV, but the resistors may also introduce 1% variation, and causing the final measured voltage to vary around 5%. By the advisory from hardware team, checking the tolerance seems not really solving or helping anything so we should just ignore that and try to find best matched ID (this also aligns to what Gru did). BUG=b:136990271 TEST=Booted on Krane and no longer seeing ADC out of range BRANCH=None Change-Id: Ie02ca5aaafbcfa8f411d973ad0266eee385d6878 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34161 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: You-Cheng Syu <youcheng@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11mb/google/hatch/variants: Fix nonworking touch padFrank_Chu
Correct ELAN Touch pad IRQ GPIO to GPP_A21 BUG=b:135507215 BRANCH=none TEST=emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I60816a4652fa39ab2a91034b268efe8f84a13e17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33954 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11mb/google/hatch: Enable/disable GPIO clock gatingTim Wawrzynczak
Before the system enters S0ix or S3, each GPIO community will have its dynamic clock gating turned on. Upon return to S0, the dynamic clock gating will be turned back off. BUG=b:130764684 BRANCH=none TEST=Used dut-power to verify that the clock gating is enabled in S0ix and S3. Also used Store(..., Debug) statements in the ASL code to verify it was getting called. Change-Id: I20ff2aac035eaa5912af6c946d837567a4918bbf Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-11mb/google/hatch: Enable LPIT inclusion in DSDTTim Wawrzynczak
Include the lpit.asl file in Hatch's DSDT definition. BUG=b:130764684 BRANCH=none TEST=S3 suspend/resume and S0ix entry/exit work correctly. Ran > 200 iterations of suspend_stress_test and no issues found. Change-Id: If8ebff3db091257e8452869636c0e024f3123e8b Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-11mb/google/hatch: Disable GPIO community dynamic clock gatingTim Wawrzynczak
The dynamic clock gating is causing boards to miss interrupts whose pulses are shorter than 4us. Disable it using FSP UPDs. BUG=b:130764684 BRANCH=none TEST=Compiles Change-Id: I8f1ec8f7c31192bce2a761ec99b86638435dc27c Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-11mb/intel/coffeelake_rvp: Add cpu count for CFL S62Lean Sheng Tan
Increases CPU max core count to 16 for coffeelake Refresh-S Platform. TEST: boot to linux OS on CFL-S refresh Intel RVP and verified the output of cat /proc/cpuinfo shows no of processor=16. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I579ff6ae8227844741406c503d3994408ec2b617 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34156 Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11mb/google/hatch: Fix interrupt trigger type for GPP_H0(HP_INT_L)Furquan Shaikh
HP_INT_L(GPP_H0) is configured for GPIO IRQ instead of APIC IRQ since it needs to trigger on both edges. With GPIO IRQ, it is necessary to configure the trigger type in coreboot to match the ACPI configuration. This is because: 1. ACPI configuration is used by intel-pinctrl driver in Linux kernel to re-configure the trigger type for the pad in GPIO DW0 config register. This is done when kernel driver probes and requests irq for its device. 2. On resume from S3, the pad configuration gets reset and coreboot sets the trigger type to LEVEL. However, kernel driver does not probe again. This results in the trigger type being configured incorrectly. This change updates the GPIO configuration for GPP_H0 to set the same trigger type as advertised in ACPI for the kernel. BUG=b:132672011 TEST=Verified that S3 works fine. Verified that interrupt on GPP_H0 works fine on boot as well as after suspend/resume. Change-Id: Ieb44c7403a2f4911b4a8f422053dee8bcfb91d85 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34181 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-10mb/google/octopus: Remove LPDDR4 RAMID index 5,6 CH[1] only SKUKevin Chiu
From Intel EDS: Table 3-5. LPDDR4 Configurations CH00 CH01 CH10 CH11 "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "Unpopulated" "Unpopulated" CH[1](CH10/CH11) can't use alone without CH[0] BUG=b:135498646,b:136694293 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I03af74301aad3e688c97992b37c59b20a4fff58a Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34069 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-09arch/non-x86: Flip HAVE_MONOTONIC_TIMER defaultKyösti Mälkki
Also remove allwinner/a10 dummy monotonic_timer implementation. Change-Id: I9dfa9b92dc63375465e3bb87b73eeefad601c810 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-09emulation/qemu-power8: Select CPU_QEMU_POWER8Kyösti Mälkki
Change-Id: I5fa6486e96cd81767225a3e1015341c0c89053d1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-09arch/x86: Avoid HAVE_SMI_HANDLER conditional with smm-classKyösti Mälkki
Build of the entire smm-class is skipped if we have HAVE_SMI_HANDLER=n. Change-Id: I10b4300ddd18b1673c404b45fd9642488ab3186c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34125 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-08sb/intel/ibexpeak: Use common final SPI OPs setupArthur Heymans
This also removes the relevant RCBA replays the mainboard dir. Change-Id: I75dd9d1bcd09d835f205a51c087d52ebb4e166f6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Thomas Heijligen <src@posteo.de>
2019-07-08qemu-q35: die if started on wrong machinePatrick Rudolph
The QEMU machine "PC" doesn't support MCFG. Die after console init if the user selected the wrong qemu machine and print a message to use the correct machine type. Without this patch ramstage dies with non-helpful message: "get_pbus: dev is NULL!" Change-Id: I9d1b24176de971c5f827091bc5bc1bac8426f3f6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-08intel/socket_mPGA604: Enable TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: I3ca2b7752905209e8db6b1dc74b930445676792e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-08intel/fsp_broadwell_de: Remove redundant TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: I240e9e767c9b38b3b06d3978fd20ddb37a96e470 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-08intel/fsp_baytrail: Move TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: Ib61ea29724401146eb6f008374cdf599f418e81f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-08mb/google/hatch: Set GPP_D9 as enable pin for Goodix Touch Screen andFrank Wu
increase reset off delay time Goodix touchscreen cannot work in normal mode because PP3300_TOUCHSCREEN_DX dropped. Configure GPP_D9 as enable pin in the devicetree.cb to fix the power sequence. Increase reset_off_delay time from 1ms to 3ms to met the HW requirement. BUG=b:135287161 BRANCH=None TEST=local build and measure sequence with Goodix touch screen Change-Id: I33140869990aa4715c780b0fa322921e450530ef Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33808 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07mb/google/hatch: Update GPIO settings for SD card and SPI1 Chip selectKrishna Prasad Bhat
This patch updates the following GPIO settings. 1. Set Native termination for GPP_G0 - G4 SD card pins. 2. Set GPP_B19 to NF1. BUG=b:123907904 TEST=Verified SD card functionality on hatch. Checked for SD detection, transferred files to and from SD card. Change-Id: I4549ac7377d7f58f51cda0eb96a62604fd31d2f2 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-07mb/google/hatch/var/kindred: Add Raydium touchscreen supportDavid Wu
Add Raydium controller BUG=b:135728282 BRANCH=master TEST= 1. FW_NAME="kindred" emerge-hatch coreboot chromeos-bootimage 2. boot up on kindred DUT to check touchscreen device by evtest /dev/input/event3: Raydium Touchscreen 3. Raydium TS is working Change-Id: Id963300ab0dadcb78786c5a1328c2a4098a48a05 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33857 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07mb/google/hatch/var/kindred: Update ELAN GPIO/IRQ and add Synaptics TouchpadDavid Wu
Update ELAN GPIO and IRQ setting and add Synaptics Touchpad BUG=b:132708463 BRANCH=None TEST=Verify ELAN/Synaptics touchpad is working fine. Change-Id: I883ce2e50ca5c6bd2b1ca76cbe24177055cc5d60 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-07mb/google/hatch/variants/kindred: Enable eMMC supportDavid Wu
Enable eMMC support for kindred. Cq-Depend: chromium:1666982 BUG=b:135464155 BRANCH=none TEST=Boot kindred onboard eMMC. Change-Id: I040af6da30313f8dd59e3ef910b290922e090cdc Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33618 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07mb/lenovo/g505s: Disable SeaBIOS options unsupported by hardwareMike Banon
G505S doesn't have any SAS or NVMe controllers and couldn't have a TPM, so it makes sense to disable the related SeaBIOS options for this board. This reduces the size of compiled SeaBIOS by 129344-110048=19296 bytes. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ib0183b7786ecd77bb0df923bc84908275f2fe14c Reviewed-on: https://review.coreboot.org/c/coreboot/+/33870 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07soc/intel/cannonlake, mb/google/sarien: Get rid of unused dev paramFurquan Shaikh
This change gets rid of unused dev param to pmc_set_afterg3. BUG=b:136861224 Change-Id: Ic197d6fb8618db15601096f5815e82efc2b539c1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-07mb/lenovo/t60: Align ACPI C-state across the similar boardsPeter Lemenkov
We have 3 similar Lenovo mainboards - x60 (oldest), t60, and z61t (most recent addition). The only one with two consequent 2s as the C-types is t60: static acpi_cstate_t cst_entries[] = { { 1, 1, 1000, { 0x7f, 1, 2, { 0 }, 1, 0 } }, { 2, 1, 500, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV2, 0 } }, { 2, 17, 250, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV3, 0 } }, }; It seems that 3 could be a better choice for the last line here. UNTESTED on a real hardware. Change-Id: I090e82d5f4ae25c768ff45a01a8dd76ff8a96a90 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-04pcengines/apuX: Replace use of dev_find_slot()Kyösti Mälkki
Find the NIC device based on the PCIe root port function. Change-Id: Ia8c6e115c9b836ee60862427dfc9d46ca3dd1b69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-07-04arch/x86: Adjust size of postcar stackKyösti Mälkki
With VBOOT=y && VBOOT_MEASURED_BOOT=y message digest will be allocated from the stack and 1 KiB reserve used with the recent platforms was no longer sufficient. The comment of LZMA scratchpad consuming stack was obsolete for postcar, so these can be reduced to same 4 KiB. Change-Id: Iba1fb5bfad6946f316feac2d8c998a782142a56a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-04amdfam10: Declare get_sysinfo()Kyösti Mälkki
It's forbidden to use dereference CAR_GLOBAL variables directly. The notation fails after CAR teardown for romstage. Change-Id: I6e6285ca0f520608c2a344517fbac943aeb36d87 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33995 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04amdfam10: Declare empty activate_spd_rom() stubKyösti Mälkki
Change-Id: I1d0940a08f7ae5901b812618a6859c4297274591 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-03aopen/dxplplusu: Replace use of dev_find_slot()Kyösti Mälkki
To use fixed PCI bus numbers is always invalid. Change-Id: Ia2ffdb1f5e0ff398674a016ad4cb94f622c057ff Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-03aopen/dxplplusu: Remove PIRQ tableKyösti Mälkki
It was never tested or injected. Change-Id: I3fd82aaa11afc5adab212ec6709580b4bcc67ca3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34001 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03mb/google/octopus: Override DDI1 DDC SDA/SCL for Garg HDMIKevin Chiu
garg 2A2C DB: SKU ID - 1 garg HDMI DB: SKU ID - 9 garg LTE DB: SKU ID - 17 For HDMI SKU9, GPIO needs to be overriden to enable DDI1 DDC SDA/SCL. BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I6ad8e5aa52f503121b10fe353e4bf4021aee2061 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-07-03mb/google/octopus/variants/fleex: Enable EMR function for Grob360SChris Zhou
Enable EMR Pen Stylus function for Grob360S BUG=b:135968368 BRANCH=octopus TEST=EMR function working normally with HW reworked Fleex. Change-Id: Ia220dc0d3051b79b110b4df66df108f701776478 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33802 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03mb/google/octopus: Add custom SAR values for BlooguardTony Huang
Google project name is Bloog. Bloog is 12-inch LCD. Blooguard is 14-inch LCD so would prefer to use a different SAR values instead. Use sku-id to load the SAR values. BUG=b:135078377 BRANCH=octopus TEST=build and verify SAR load by sku-id Change-Id: Id80df28a961eb1f62714558df2b219aa552ecb97 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-02mb/google/hatch: Set trackpad irq and wake to GPP_A21Shelley Chen
Previously, We had to use GPP_A21 for trackpad wake and GPP_D21 for trackpad interrupts due to ITSS not honoring the INVERT config. Now that's fixed, we can configure trackpad wake and interrupts on GPP_A21 only. BUG=b:130436471 BRANCH=None TEST=1. boot a hatch device and make sure we can move the cursor with the trackpad 2. Run powerd_dbus_suspend and wake by clicking on the trackpad and ensure through "mosys eventlog list" that the wake source is the trackpad.\ 3. Run "echo mem > /sys/power/state", wait until device goes into S3, click trackpad to ensure device wakes. Change-Id: I26a99206c42ba442f91ae577b98366fc2fd6c0ca Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-02mb/google/hatch: Add INVERT to all IOAPIC padsShelley Chen
Now that ITSS config is fixed, we can set the IOAPIC pad configs correctly. BUG=b:123967687 BRANCH=None TEST=Make sure Hatch is booting and tested out trackpad to make sure can move cursor and wake by clicking on the trackpad after running powerd_dbus_suspend. Change-Id: I0b125996338b6f16e03b7ca184f6337c696a5f64 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33819 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02mb/google/reef/variants/: fix Samsung K4F6E3S4HM-MGCJ densityKevin Chiu
Samsung K4F6E3S4HM-MGCJ density is 16Gb BUG=b:121228792 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage MemTotal: 8041964kB in /proc/meminfo Change-Id: Ie8ecd82b92d4e82d3955cf773febca30f6280a5e Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-01mb/up/squared: Add kernel cmdline parametersFelix Singer
Since ttyS0 isn't used for UART0, configure ttyS4 as default Change-Id: Ia0469226253b08328807d5401c05633296e43d22 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33785 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28asus/am1i-a: Enable UART according to CONFIG_UART_FOR_CONSOLEMike Banon
It has been observed by me and Elisenda Cuadros / Gergely Kiss [1] that the boot process of this board is super slow when UART 0 is being used - even if nothing is connected to it. Enable UART according to CONFIG_UART_FOR_CONSOLE - and, if UART 0 is selected, it will be initialized at romstage and this problem will not happen. [1] https://mail.coreboot.org/pipermail/coreboot/2018-February/086132.html Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I6579aa8fd092da84f8afdcc33496db45c582919f Reviewed-on: https://review.coreboot.org/c/coreboot/+/33796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-06-28mb/google/kohaku: Correct trackpad i2c addressSeunghwan Kim
Correct i2c address of trackpad. It should be 0x20. BUG=None BRANCH=None TEST=Verified trackpad works on pre-evt system Change-Id: I7ded21ce8ff9e907e436777a27edb4273512011d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-06-28mb/emulation/qemu-riscv: Use generic 8250 uart driverPatrick Rudolph
Drop hacked uart code and use the generic 8250 uart driver for ns16550a. Tested on qemu-system-riscv64: * The UART is still working. Change-Id: I6efda913fa39e0cfa466b52c570572aca90dacdf Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33735 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Philipp Hug <philipp@hug.cx> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-27mainboard: Add support for ASUS P8Z77-M PRO desktop mainboardVlado Cibic
Add support for ASUS P8Z77-M PRO desktop mainboard Working: - Tianocore and SeaBIOS boot - PS/2 keyboard and mouse - Audio - S3 Suspend, shutdown and reboot - USB2 / USB3 - Gigabit Ethernet - SATA3, SATA2 and eSATA - NVME - CPU Temp sensors - TPM - Native raminit and also MRC - PCIe GPU in all PCIe slots (16x/8x/4x) (linux) - Integrated graphics with both libgfxinit and Intel Video OpROM (all connectors VGA/DVI-D/HDMI) Signed-off-by: Vlado Cibic <vladocb@protonmail.com> Change-Id: I47d24ac8b236f929c3160f9a769b971d83710f9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/33328 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-27mb/upsquared: Align partitions to 4KiBFelix Singer
This fixes warnings while booting coreboot. Change-Id: If1e99b74ded5f743a3ad4fc829ae9747276c483a Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33784 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-27mb/asrock/h110m: set serirq_mode to continuous modeMaxim Polyakov
By default, the LPC SIRQ mode is set to Quiet mode. Therefore, COM-port from the SurerIO chip don't work correctly after the LPC controller (PCI 0:1f.0) initialization. Console output is broken. The patch fixes this bug by overriding the serirq_mode option in the devicetree.cb to set Continuous SIRQ mode Change-Id: I37e26b271fb61f6c0343d6bf65c029924df82caf Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33801 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-26mb/google/hatch: Add a GPIO to enable/disable FPMCU powerPhilip Chen
A FPMCU power-control pin (GPP_C11) is added to the latest hatch reference schematic. Even though this is not implemented in hatch rev1 board, the future hatch family boards with FPMCU should all have this control pin. On the old boards without this control pin, GPP_C11 is a floating TP, and thus this patch should be backward-compatible. BUG=b:130307667, b:135216932 TEST=build Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: I6a84eeb6aab562258e749a8a5d09dadfa0e43587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-26mb/google/hatch: Remove pulls on NC padsFurquan Shaikh
There is no need to add internal termination (PU/PD) on the not-connected pads. This change gets rid of the terminations on the NC pads. Change-Id: I3df538d7127e5ef75e6e6ff9db3524e26f0450ed Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-06-26mb/google/hatch/variants/baseboard: Update PL2 power limit valueSumeet Pawnikar
Update PL2 power limit value from 44W to 64W. BUG=None BRANCH=None TEST=Build and Boot hatch EVT Change-Id: I3f4b5ab8bf0ce9464c322c148843f5a3e8d706d9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-06-26mb/up/squared: Remove unnecessary codeFelix Singer
This patch removes unnecessary code which configures default FSP values. Change-Id: If7dae4f24a9fcb01d2d47063dd3a0f4ce6c120d2 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-25atlas: enable GEO_SARCaveh Jalali
BUG=b:131634035 BRANCH=none TEST=verified SAR data shows up in ACPI SSDT table. Change-Id: I65ef59c9616b1cae3fa4c4b18bbfe4ed098d2891 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-25intel/945 boards: Use smp_write_pci_intsrc()Kyösti Mälkki
Radically reduces line lengths and splits '(bus<<2) | INT' to separate parameters. Change-Id: I0cfd714da3d2773affdb34d1dab2ac32879e2cfd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30740 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-25mainboard/facebook/fbg1701: Set CBFS_SIZE to 0x600000Frans Hendriks
CBFS_SIZE equals size of whole SPI device. The descriptor and ME need to be placed in bottom part. Reduce the CBFS_SIZE to maximum avalaible size. BUG=N/A TEST=Boot Embedded Linux 4.20 on Facebook FBG-1701 Change-Id: Iecfae4573100c6787b6e8b1c4f2583a7fb3d95a3 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-06-25mainboard/facebook/fbg1701: Use LCD Panel type for name of tablesFrans Hendriks
tc348860_table contains the eDP to MIPI Bridge controller type. b101uan08_table used the LCD Panel type. Use LCD Panel type for name of tables. Remove the incomplete resolution comments and specify the resolution at the start of the table to 1200x1920. BUG=N/A TEST=Config eDP and verify LCD panels are working on Facebook FBG-1701 Change-Id: Ic152ea1f95f155ab76638b57a259d37ce6f43037 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33736 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-25mb/lenovo/z61t: Remove `fn_ctrl_swap` optionPeter Lemenkov
It seems that the EC on t60/x60/z61t doesn't support it. This wasn't even introduced in z61t so let's remove the remaining bits. This commit follows up on commit a5fcc2e4 with Change-Id Id2964002406a5fcf992f0ffc3627e3f66a2bb13f ("mb/lenovo/x60/t60: Remove `fn_ctrl_swap` option"). Tested on a real hardware. Change-Id: Ifd5e7823af305cc4a0194ee2097a749e43680c55 Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Andrey Korolyov <andrey@xdel.ru>
2019-06-24mb/gigabyte/ga-h61ma-d3v: Add new mainboard as variantAngel Pons
Tested with SeaBIOS as a payload, booting Arch Linux with a Linux kernel. The new code is based on autoport and the existing GA-H61M-S2PV code. The GA-H61M-S2PV has been boot-tested too, it still boots. Working: - S3 suspend/resume - USB ports and headers (Intel USB2 and EtronTech USB3) - Gigabit Ethernet - Integrated DVI/VGA graphics (libgfxinit) - PCIe x16 graphics - PCIe x1 ports - PS/2 port with a keyboard - SATA controllers (Intel SATA2 and Marvell SATA3) - User-space fan control (fancontrol on Linux) - Native raminit (4+4GB DDR3-1333) - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. Backup chip is untested. Untested: - VGA BIOS for integrated graphics init - Audio: Only front/read outputs has been tested. - Non-Linux OSes - ACPI thermal zone and OS-independent fan control Not working: - Default IFD defines the BIOS region as the entire flash chip. Using 'flashrom --ifd -i bios' is asking for a failed flash! Change-Id: I37928de158bb8fbb47fbda5d1ccd4efba7edab26 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-22mainboard/facebook/fbg1701: Configure TC358860 eDP to MIPI controllerFrans Hendriks
FBG1701 contains a TC358860 eDP to MIPI Bridge controller which needs to be configured. Add mainboard_configure_edp_bridge() to program the controller. CPLD version is used to determine which table must be programmed. The eDP is an i2c slave which expects the next i2c bus data for block write: <Slave Addr> <Reg Addr[15:8]> <Reg Addr[7:0]> followed by data with LSB first. BUG=N/A TEST=Config eDP and verify LCD panels are working on Facebook FBG-1701 Change-Id: I262cb4376b86db94e3bb9522c556b5cc3ff38335 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21mb/asrock/h110m: Correct Kconfig symbol selectionAngel Pons
The asrock/h110m has a NCT6791D, but is selecting the NCT6776-specific SUPERIO_NUVOTON_NCT6776_COM_A symbol. Use the NCT6791D symbol instead. Change-Id: I9f3fde161844f919b070f2b6ce7e106411439a9a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <m.poliakov@yahoo.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-21mb/ocp/wedge100s: Use the new IPMI driverPatrick Rudolph
* Enable decoding the IPMI KCS to LPC * Select the IPMI driver * Add the PNP device that holds the IPMI KCS base address Tested on Wedge100s. Change-Id: I35634bbcbe6893bd72ec7e41f6ca7bba09d819a2 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-21mb/lenovo/x201: Remove duplicated includePeter Lemenkov
Change-Id: I0917f11091b8c93c21c0e25690440b7dd0e9c8ba Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-06-21mb/facebook/fbg1701: Remove unused Kconfig symbolsArthur Heymans
Change-Id: Ifc61fd11c9d7a4d192eaae73c5421f643d27d817 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21mediatek/mt8183: support SAMSUNG and MICRON EMCP LPDDR4X DDR bootupHuayang Duan
Support SAMSUNG KMDP6001DA-B425 and MICRON MT29VZZZAD8DQKSL EMCP LPDDR4X DDR From the calibration log of MICRON MT29VZZZAD8DQKSL, we found the begin pass range of RX window earlier than with other DDR type. So need change the DQS starting offset to increase the scan range of RX window. BUG=b:80501386 BRANCH=none TEST=Boots correctly on EMCP DRAM Change-Id: I5fcc8673a2fbd7ec3a8776ab61c57f8903ddda20 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com>
2019-06-21mb/google/octopus: Override VBT selection for GargKevin Chiu
Garg proto build has 3 SKUs: garg 2A2C DB: SKU ID - 1 garg HDMI DB: SKU ID - 9 garg LTE DB: SKU ID - 17 For SKU#9, VBT will need to be overridden to enable DDI_C output to HDMI BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Cq-Depend: chrome-internal:1380847 Change-Id: I6c0ec086496eaf217ea8e326f5084d886d0e698f Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-06-21mb/google/octopus: expose get_board_sku as globalKevin Chiu
BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I1fb7b5eeac48f2cd9c24fa1d3ac3fe4b390762d2 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33448 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mb/emulation/qemu-riscv: Support arbitrary ROM sizesPatrick Rudolph
Make the linker script dynamic to support non default ROM sizes. Prevents weird runtime issues due to stages overwriting parts of the CBFS while decompressing stages. Change-Id: I37b9187c719b907959f02a272ec0459aabbcda3c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2019-06-21mb/google/hatch/variants/kindred: Update memory strap GPIOsDavid Wu
According to the latest schematic (b:127996858#comment38), MEM_CONFIG_0 --> GPP_H19 MEM_CONFIG_1 --> GPP_H22 MEM_CONFIG_2 --> GPP_F10 MEM_CONFIG_3 --> GPP_F3 BUG=none BRANCH=none TEST=Boot kindred proto board Change-Id: Ib79f9454116583a94fe1fd53a37ed928d32988d5 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-06-21sb/intel/bd82x6x: Set up io_gen_dec in romstage based on devicetreeArthur Heymans
Set up generic decode ranges based on the devicetree settings. Change-Id: Ie59b8272c69231d6dffccee30b4d3c84a7e83e8f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-21mainboard/facebook/fbg1701: Remove unused includesFrans Hendriks
Files onboard.h and mainboard.h are not used for building. Remove these files as include. BUG=N/A TEST=Build and boot embedded Linux 4.20 on Facebook FBG-1701 Change-Id: Ifeb0047357e641cbe1affbbaf5402213802c774c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-21mainboard/facebook/fbg1701/fadt.c: Use asl_revisionFrans Hendriks
Fix value of 1 is used for asl_compiler_revision. Use asl_revision for this. BUG=N/A TEST=booting Linux 4.20 kernel on Facebook FBG1701 Change-Id: Iffd8fe637d4669b7099fb6eafc9873560502bf80 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-06-21soc/intel/skylake: Clean up KconfigArthur Heymans
This does the following: - select MAINBOARD_USES_FSP2_0 on Kabylake (does not support FSP1.1) - Remove stale Kconfig option on intel/saddlebrook - select SOC_INTEL_KABYLAKE on intel/kblrvp Change-Id: I64f48eeb00150aea039d533b0ac471fdd8483b90 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-21qcs405: Update bootblock sizeNitheesh Sekar
Increase the size of bootblock from 96K to 128K. Change-Id: Ifc6e7239ed2978a8490fa229945ebd5ed9182298 Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33159 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mb/google/hatch: Do not pull down GPP_F2 internallyPhilip Chen
There is already an external pull-up/down resistor tied to this pin to identify if the board is single-channel or dual-channel memory SKU. BUG=b:135496271 BRANCH=none TEST=build Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: Ie218657fd9dde113ab26cf5551d1dff1b6e392b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-21mb/lenovo/x201/smihandler.c: Remove useless smihandler codeArthur Heymans
This code to handle the brightness from SMM is copied from the Lenovo Thinkpad X60 code, but does not work on later generation. The PCI device it tries to address does not even exist on those devices. Change-Id: I0c25c3e5bec651b27158a84cc91289639a04ceb6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-21mb/packardbell/ms2290/Kconfig: Remove ARCH_x optionsArthur Heymans
Those are already selected in cpu/intel/model_2065x/Kconfig. Change-Id: I7421faa24b8a95d2780bce0651cde0bfeb357833 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21mb/*/{x201,packardbell}: Remove unused C-state generation functionsArthur Heymans
Those are copied from Lenovo X60 code, but are unused. NOTE: No ACPI C-state are generated on this platform but Linux has a separate driver for that. Change-Id: Ie9b49f5451d8cde9c36672cac1f0f14cb3f0095e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33140 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21sb/intel/ibexpeak/smihandler: Move finalizing to a common locationArthur Heymans
TODO: There is no reason to do this in SMM. Change-Id: I8bbb2f65bbe674bd1bc4ae8a4086bd1f5e9a79fa Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33139 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21siemens/mc_apl5: Change PTN interface settingsMario Scheithauer
Switch the default clock output for single LVDS mode to odd bus only. Change-Id: I278e761566a112d95cbd6c79e09c076d70b93e8f Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 20:04:03 +0000