| Age | Commit message (Collapse) | Author |
|---|
|
Indicate to rest of coreboot that MAINBOARD_HAS_CHROMEOS
instead of auto-selecting it.
Change-Id: I61cde263f4ad7bd6758a61fc54c456c2ad2f343e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9153
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These binaries were being added to CBFS using hexadecimal values instead
of the CBFS binary type names. The same value was being used in
different places for different things.
For example, the value 0xAB is used for SPDs, MRC & FSP binaries.
This patch uses CBFS type names instead of hex values everywhere a
hex value was previously used.
Change-Id: Id5ac74c3095eb02a2b39d25104a25933304a8389
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8978
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This doesn't even compile in downstream.
Change-Id: Ic7b3736db86e8de155e0f37afa970ce5095396fa
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9164
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The ASUS KFSN4-DRE has a physical BIOS recovery jumper;
force coreboot into fallback mode if that jumper is set.
Change-Id: I513299c3e3261fc76133a49813685d48c53a172a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9156
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Use the run_ramstage() function to load and run ramstage.
Change-Id: I783801bf506fa2f9608eefe1cd20257292c80af5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9148
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
The actual level required to take the ethernet switch out of reset is
low, not high.
BUG=chrome-os-partner:31780
TEST=with this patch applied, when proto0.2 boots, the ethernet
switch's LED blink once, as was the case with proto0.
Change-Id: If4004ac5c2dc837270d4cb840d96ce92021d231e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9fa69d22de901cd0843948de0f95a66a2aa99353
Original-Change-Id: I81eeb73b85cf113709b6d4ac3aa7639a40fa6719
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217416
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9121
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The proto0.2 hardware connects gpio26 (sw reset) to the ethernet
switch reset pit. The output stays low (or high-z) after power up,
which holds the switch in reset. Deassert the signal at startup on
hardware rev 1 and later.
BUG=chrome-os-partner:31780
TEST=with this patch applied, when proto0.2 boots, the ethernet
switch's LED blink once, as was the case with proto0.
Change-Id: I4c5a0cc499563a33aa7d29be7767d0ec5d93c20f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6788962172c6e29e193fa3e85ca79cb83a96e154
Original-Change-Id: I81b3dccb1d1d43c5c1e6dcb5400af8eed6dee870
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217087
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9120
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Figuring out board_id on storm requires reading tertiary gpios, which
takes time. Let's calculate it once and reuse it when necessary.
BUG=none
TEST=verified board ID reported as 0 and 1 on proto0 and proto0.2
respectively.
Change-Id: I69f6afa3de8a175a1d723e95902efd15607e68b7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 080c839c1c0c1b5e389b2382144ef67535bb4ff1
Original-Change-Id: I4e237077d1d9a96daebba462cd00f3f40be14518
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217086
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The proto0 storm hardware has the TPM reset line wired to the SOC GPIO22
pin instead of the system reset. This causes all kind of TPM behavior
problems and requires frequent power cycles. Adding explicit TPM reset
makes all those problems go away.
BUG=chrome-os-partner:30705, chrome-os-partner:30829
TEST=tried resetting proto0 at different moments during boot up - the
TPM does not fail anymore.
Change-Id: Idfa16e6e868336f38861edeb75703fff3f35172c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5e07815c227089b7f266ba5329812bf309b87e6
Original-Change-Id: Ia877fcd9efaf3ba12c8fe8c2958bd81c4bf22799
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211497
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9118
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Storm provides three real and two fake gpios. To keep things simple,
define them all as active low and provide appropriate values for the
fake ones.
BUG=chrome-os-partner:30705
TEST=with the appropriate depthcharge change booted proto0, observed
appropriate behavior following the dev switch setting
Change-Id: I248b90ee06d226a223b6fc0993f209acdd58c77d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d48d1dcc88df0c1bd4c50f14dd2e7cd1dd4fba5d
Original-Change-Id: Icb7fb55949fa97ead9d19f0da76392ee63bbb5b8
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210922
Reviewed-on: http://review.coreboot.org/9117
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change updated the EMC tables with emc_reg_tool 5.0.18,
for below memory SKUs:
- Hynix H5TC4G63AFR-PBR 2GB, ramcode = 0
- Micron MT41K256M16HA-125 2GB, ramcode = 1
- Samsung K4B4G1646Q-HYK0 2GB, ramcode = 2
- Hynix H5TC8G63AFR-PBR 4GB, ramcode = 8
- Micron MT41K512M16TNA-125 4GB, ramcode = 9
- Samsung K4B8G1646Q-MYKO 4GB, ramcode = 10
BUG=chrome-os-partner:30963
BRANCH=blaze
TEST=emerged coreboot, booted successfully into kernel.
Change-Id: Iee329ff09e35cddd3c868c0460a38ef56b2ac5bb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 158872ff7c0dd5274cfa8d63ec17b4423a4592ce
Original-Change-Id: I44adfdb5b433e37e2d25095acdcce3d9c14eb897
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210024
Original-Tested-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://review.coreboot.org/9116
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Both buttons are active low.
BUG=chrome-os-partner:32517
BRANCH=None
TEST=Compiles successfully and volup and voldown button presses are detected in
pseudo keyboard driver in depthcharge
Change-Id: If217a75f95042af8a831e7109d9b1acb10c55823
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c393e166a1ed0bc7920078aac6accf442abb5955
Original-Change-Id: I08f94972db53aa17a63f6e16cbaebe7af358cdc2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/220687
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9104
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There's no need to add DMA ranges for these boards as
that memory is allocated within dpethcharge now. Additionally,
the DRAM_DMA_* Kconfig options were removed resulting in 0
values.
BUG=None
TEST=Built rush and ryu.
BRANCH=None
Change-Id: I597437960e4fddbf6d26f0b15ddeefc4557adc8b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f26b503d759b2bac902e58e928d7c625c1a6c575
Original-Change-Id: I52bb8f760a56226c75611f7981570a44d56f242e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219710
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9101
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31821
BRANCH=None
TEST=Built and booted to kernel prompt on ryu. Rush compiled successfully.
Change-Id: I63ba55c53094c185d72dcb5c5d0d766461989806
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4a9aa565244bae5659e458ea90064eb5b803d574
Original-Change-Id: I5b00fbcb8e414c67563f1ad548f84c281898f939
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219392
Original-Reviewed-by: Tom Warren <twarren3959@gmail.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9100
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31820
BRANCH=none
TEST=Dumped Speaker Driver (AD SSM4567) regs on Ryu, looks good.
Change-Id: I9b094e9d22726d67d41f2ce78088f361c73895fd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4c0bfb5f747f55009b7c2b2ba4b24d91443b1639
Original-Change-Id: Idd5b95cfec7d3ade7508393b81ab3049ce15a2fb
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/218950
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9095
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Do the absolute minimum needed to allow the DPAUX mux ctl write
for I2C6. This leaves HOST1X off (reset and clock disabled) to
avoid a conflict with any kernel display driver init.
I2C6 init/enable will be moved to ramstage in the next CL.
BUG=chrome-os-partner:31820
BRANCH=none
TEST=Dumped Speaker Driver (AD SSM4567) regs on Ryu, looks good.
Change-Id: I42106778a26c5a1d1483cc308b8314599c391539
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24a9ebfda31c620b24e5c765dc950b87e3e5587b
Original-Change-Id: I0760222f1d7ccee207ae9871aeed3e2ddbca3dca
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/218900
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9093
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
With the generic spin table support in place, use that.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=None
Change-Id: I7c9ebd16cd7d5e938e686df2225c612581382983
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fb0d79f89e27fcd51cc751a94008b3801f5c6d0b
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Change-Id: Ic9949144ed1e9a952290d50b6726bf5891547896
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218657
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9087
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
With the generic spin table support in place, use that.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Booted into kernel.
Change-Id: I8644f8a81b24bf4e00f8fac1d1018f9db77c952f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b1a4fe27070a80c8448051ec0565120901378673
Original-Change-Id: Id0832a4553101a366f011099e0744f6630d91924
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218656
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9086
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully
Change-Id: Ife5300db8721a158f8a3b027aca4c51e4ea513a6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 02bcdc7069e271563b7fd1893b92fb4d33cf8529
Original-Change-Id: I59e0f8d26d50baf68561b38f370195dea98881e1
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217572
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9073
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and dma areas are setup fine by libpayload mmu
Change-Id: I6d2d1dbcfc9bdeea94c89a9a3fce486203269642
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0425e87f21bcb92861240d6437769a5b28e9929b
Original-Change-Id: I1034a4dcf6c9ee56bee4ea5d18e91a8d51895429
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217571
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9072
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Rush builds were throwing a _sync_sp_el0 exception due
to commit 65af2f3d (tegra132: support arm64 SMP bringup).
Fixed by copying over the rush_ryu devicetree.db, which
adds all the CPUs to the device tree. Basically the same
as commit 8f61ca2da but for rush.
BUG=None
BRANCH=None
TEST=Booted rush OK, brought up rush kernel from USB.
Change-Id: Ia91260ed36364ae1cfdd28932f09df9486c7e638
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 649391a402527cef1465d5a948323ad95c77917d
Original-Change-Id: Ic9e34494ec8e6ad82e6020df6ad6fecd8763ac7e
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217792
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9067
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Now that arm64 and tegra132 has cpu devicetree support stop
using the bring_up_secondary_cpu option.
BUG=chrome-os-partner:31761
BRANCH=None
TEST=Built and brought up 2nd core.
Change-Id: I3ffca6c1fa0932d8aafea30a160608b5593ae154
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c45b22ce9fd0345c3e599fd814993db66e2b96cc
Original-Change-Id: I210bea73f8249de15f99d0c062600e789184eefd
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216928
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9059
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The static gpio_t initializers are stylish, but they are still a little
too annoying to write and read in day-to-day use. Let's wrap that in a
macro to make it a little easier to handle.
BUG=None
TEST=None
Change-Id: If41b2b3fd3c3f94797d314ba5f3ffcb2a250a005
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 102a5c0a800f43d688d11d1d7bbc51e360341517
Original-Change-Id: I385ae5182776c8cbb20bbf3c79b986628040f1cf
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220250
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9052
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a mainboard-specific bootblock function that will be used
to set up some board-specific parameters which are currently set up
in the SoC bootblock function.
BUG=none
BRANCH=none
TEST=built and booted on Pinky
Change-Id: I86c90f7ade824fb9d6b71ca3349d1ce9eb4772fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 03e0bb2eaca7a54c3df95b21d856ef4114d3c833
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Ibee7076ebd6080f04b0697067e85ce8b6b2230e4
Original-Reviewed-on: https://chromium-review.googlesource.com/220399
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9050
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Danube has become Pistachio, let's rename all instances where this SOC
is mentioned.
BUG=none
TEST=board urara still builds
Change-Id: Iea91419121eb6ab5665c2f9f95e82f461905268e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 58696cc7c77a70dca2bfd512d695d143e1097a78
Original-Change-Id: Ie5ede401c4f69ed5d832a9eabac008eeac6db62d
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220401
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-on: http://review.coreboot.org/9048
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Not much is happening yet, when the board is enabled (in the next
patch), all three components build successfully, the map files show
them placed where expected and the bopotblock is wrappeed in a BIMG
header.
BUG=chrome-os-partner:31438
TEST=when config is enabled, emerge-urara coreboot succeeds. more
extensive testing to come later
Change-Id: Ib7396189f4bee0fdd6a8ce5c9ab1277806cb5dcc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1ca9efe59a7fcb99412410d509a7f9a91b6ef3ec
Original-Change-Id: I573cfb70f5c1e612dfa0a55d3d22d92f00584c66
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214600
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9047
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add all the CPUs to the device tree.
BUG=chrome-os-partner:31761
BRANCH=None
TEST=Brought up 2nd core on ryu in kernel.
Change-Id: I4cc51f30897e3bd6c1b275a95d5da34ce7ae320e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 485de634a49d606dc6e7168f047eb9365e26415f
Original-Change-Id: I682f23a9b68f49206aa99d55e800540d8d0f8900
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216426
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9034
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This function is breaking display bring up in the kernel. While
this functionality may be needed it's not until there is a
necessity to beep and/or bring up the display in firmware.
BUG=chrome-os-partner:31820
BRANCH=None
TEST=Sean ran with this patch and the display indeed did come up.
Change-Id: I5cf8a6c6e6941ee138991933215f96f5562382be
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 038bc1d53028409d0640c78fb62c7025ba12dcb9
Original-Change-Id: I833d66a0e63e04118b130b6803a7a3b68c802148
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216421
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9031
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These are not needed/were never really used. SDRAM init will now
be done in sdram.c, not the BootROM.
BUG=chrome-os-partner:29921
BUG=chrome-os-partner:31031
BRANCH=None
TEST=Built rush_ryu AOK.
Change-Id: Id046592415574badb97026224e1e525c174eece4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aab1045817125cb022c8e8b89b85ef14e581baa7
Original-Change-Id: I7d25de3e888bb24e4c6e6dea2726510c97fe1730
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/215863
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9030
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The power button signal is driven from the silego part.
It's active high when the button is pressed.
BUG=None
BRANCH=None
TEST=Booted with power button pressed. vboot saw the press and
requested a shut down.
Change-Id: Ifff1bd8d4340849e0c218812fd401b61c90c5743
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b6bd7c0de38e1078b85f1671493c6d2948d43149
Original-Change-Id: If25ebce28c1ab5a363f3b4b5ab9fc24baebad56a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214847
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9028
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of calling out the gpio index and port numbers use
real names. It's semantically clearer and there's only one
place to adjust the hardware values.
BUG=chrome-os-partner:31106
BRANCH=None
TEST=Built and booted.
Change-Id: I4a0bc034fe4f648b73ebf6389d8669fe15db1d8f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5f2af2e32903b3df64f3f25a42fb42b0b629152c
Original-Change-Id: I68c138b428abbd0c9bc60be0cfc70681528d7728
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/215542
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9027
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The kernel doesn't have the logic for bringing up the plld.
Therefore, configure it in the firmware. The clock used
is an interim value until the display controller sequencing
is fully implemented.
BUG=chrome-os-partner:31640
BRANCH=None
TEST=Noted configured freq is close to requested. Also, no
more plld errors observed from the kernel.
Change-Id: I0788c83843699ec7cef52b3a219ebb9b0db9082f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b44956ec87e9083aebe589349cbe168f7f101d8b
Original-Change-Id: I6f57d5c48630385d1814e7ef61898a2d49c8f747
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214841
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9026
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instruct the SoC to bring up the 2nd core.
BUG=chrome-os-partner:31545
BRANCH=None
TEST=Brought up 2nd core in Linux.
Change-Id: I4b31ea5f1466c43abce273b2bfb6a4d06b7faa63
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 74c62e62a6790de65e303123abee2be1dfffbee3
Original-Change-Id: I5f5febc4719951188106041f73625231eafe1b08
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214778
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9022
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of relying on the encoding of gpio_get_in_tristate_values()
normalize the ids.
BUG=chrome-os-partner:31602
BRANCH=None
TEST=Built and noted correct output w/ coresponding correct device
tree selected in depthcharge.
Change-Id: I6fc712aceb56d701725759503b9cfa1061ed25d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1037d473f35613bf39a4b27a9c1ade718b852c0d
Original-Change-Id: I7d5449bc14e776fd9faa86af0f80690c3d9ae92d
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214840
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:30748
TEST=Verify that LTE modem appears on USB during kernel boots on Ryu.
Change-Id: I5b73a632ab827abe9c064a097e04d2c9030f9b46
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 070538e60b384d17e17ba3544881ef642c3f33ba
Original-Change-Id: I8ec1f94c9aec5b4895a01cdfd3b86f88cd6bb877
Original-Signed-off-by: Ben Chan <benchan@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214020
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9002
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use the bus number enumerations from funit to make the
pad names and bus numbers consistent and clearer.
BUG=chrome-os-partner:31106
BRANCH=None
TEST=Built and booted to kernel.
Change-Id: If84ed825537f598c033dcacbcba759e0fe4e90ec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f4375a8e47f572d618044f65603fb9288832f936
Original-Change-Id: I817a56e879ecc96474128d624dc46c12ebc5c7a8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213492
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8997
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=none
BRANCH=none
TEST=built ryu, booted to recovery mode OK
Ran TegraShell and could r/w I2C6 regs OK
Change-Id: I7dca131ab5bd4dac50891937f792ac70b1bb532f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 29591a97fbb8fc42143ff6c7838c9935834ca516
Original-Change-Id: Ic74e3518ab69ec7b1bc3bc4f637b7b38b85734c9
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/212926
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8993
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This memory is also x16 and needs slight tweak to tRFCmin
in order to be functional.
BUG=chrome-os-partner:31833
BRANCH=None
TEST=build and boot on EVT unit with this config
Original-Change-Id: I01163ee7e70f08ccad84a3da39f1aac96e4c4771
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217190
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 6c4bf71c8c8e1e46ce290441c2e21bc7b2839760)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I389936d85e61a0a939cd4485fcc0723d2a0aa4d6
Reviewed-on: http://review.coreboot.org/8972
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
Samus has a PD MCU, and should handle PD MCU host events.
BUG=chrome-os-partner:31361
TEST=Manual on Samus. Verify that ACPI Notify routine is called when
host event is sent from EC.
BRANCH=None.
Original-Change-Id: Id40ebd438b3dd60cefc7650f2edc695c589343e9
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214860
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Alec Berg <alecaberg@chromium.org>
(cherry picked from commit d0752be013f66313d4218338e62372d0f5975097)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I08eb51eceeb7d2835d55e7e861126b137de72bf6
Reviewed-on: http://review.coreboot.org/8969
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
- Remove NFC GPIOs
- Change EC wake to GPIO27
- Enable wake on HOTWORD_DET_L_3V3
- Add new Hynix memory SKU
BUG=chrome-os-partner:31549
BRANCH=none
TEST=emerge-samus coreboot, cannot fully test until EVT
Original-Change-Id: Ia25fc39f0b67c53305b3fd9150117d6a7867eb3a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213796
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 740ac0bb7eaa9ae35fce8a04825f9c5ecf7cab79)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2b1c194eae2ebc53291f078c00ba04f82e10b0c1
Reviewed-on: http://review.coreboot.org/8963
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Instead of providing a local copy use the chipset provided one.
BUG=chrome-os-partner:28234
BRANCH=none
TEST=build and boot on samus
Original-Change-Id: I60dd9bbeefbf4298511abec54635c515fc9b1621
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213793
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 9dc8e7ae61f0337aa145b7d99acc23852d1cfc9a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I259be321e01e2047666b4be106dea59a5578d9d3
Reviewed-on: http://review.coreboot.org/8962
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Add ACPI device for WLAN and enable GPIO 10 as wake
source in _PRW.
BUG=chrome-os-partner:28234,chrome-os-partner:30671
BRANCH=None
TEST=boot on samus, check for WLAN in /proc/acpi/wakeup
Original-Change-Id: I09b6eeae5bd88ee9d7e0b7e735ed871e8ae6963a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211820
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c65ce028e64aebffb99648b2c34c4ff0e7c4e70f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If192564ddd10c7fe758a4d7266394a30e7d966d4
Reviewed-on: http://review.coreboot.org/8953
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
I was using the wrong datasheet for these parts. Revert
to the previous geometry settings so they work again.
BUG=chrome-os-partner:28234
BRANCH=None
TEST=build and boot on samus
Original-Change-Id: Ibc4a864d458e5ee5ef69aa4f1db5efe14076422a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211610
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit f8591e1579d205609a959082d8047d407b4f6a5a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I52ed3609c9686fef13711578597065ca4e907df4
Reviewed-on: http://review.coreboot.org/8951
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Workaround for auto shutdown issue on broadwell SKU.
Now we can see C7 transition, and MRC fastboot
BUG=chrome-os-partner:29787,chrome-os-partner:29117
BRANCH=None
TEST=build ok and boot on samus
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Commit-Id: 932152b16c3943b00bd317e7370402dda451529f
Original-Change-Id: Id1f174b67fa3e6f248dd8b21aee25e6e01abf33e
Original-Reviewed-on: https://chromium-review.googlesource.com/210870
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Tested-by: Kane Chen <kane.chen@intel.com>
Original-Commit-Queue: Kane Chen <kane.chen@intel.com>
(cherry picked from commit 932152b16c3943b00bd317e7370402dda451529f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie9fb792635b39d33136cef576ae5559013d5947a
Reviewed-on: http://review.coreboot.org/8950
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
- geometry was incorrect for 8GB modules, should be x32,
so refactor the rest of the geometry to match
- some of the timing values were off, calcualte new values
from the datasheet
BUG=chrome-os-partner:28234
BRANCH=None
TEST=build and boot on samus
Original-Change-Id: I645f354ef21c5032ab73c66e1ad843136ec93eff
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210660
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 8b2ce5c58442e039f5f6e0e053c0072fdec76e9c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I29daa9e0ad1bf32be914c0d998f188b9827344a1
Reviewed-on: http://review.coreboot.org/8948
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
We don't set these by default in upstream.
Change-Id: Ida7aa498e0fe291c6cf3cf31d6516530a9d136d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/8988
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=chrome-os-partner:31293
BRANCH=None
TEST=Able to get sporadic USB communication in depthcharge on ryu.
Change-Id: I6bf6559d167a6ea94523d2500b54c1c7854330f4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e5412cfc149902298f2ebeb3030d8f09f27e5ee8
Original-Change-Id: Ic5402d18943c3cc8fb4556c47e587134633fbf72
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/212333
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8939
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31293
BRANCH=None
TEST=With non-cacheable memory region and dma range addition, booting from usb
reaches the same point as mmc.
Change-Id: I218c751f41fb881af4fed0bcccc378dde1fd07b4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a26e07b58f454c598bf5b7a4940c238135548bbd
Original-Change-Id: I1083f8de2bfbe9a233d317b29b8fc56f47c7061d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211039
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8937
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use the new funit API to do all the dirty work.
BUG=chrome-os-partner:29981
BRANCH=None
TEST=Built and ran through depthcharge and into recovery just like
before.
Change-Id: I8625a06dd847bd3dcfc3ce5a50a31d6aff0b860f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ebc04a174269ae072eda804e172fd24362f417d2
Original-Change-Id: Ief2d81c5569c33a90fc9458d741edef1dcbd8239
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/212152
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8930
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Currently rush needs a DMA region in order to communicate with
USB devices. Therefore, add that region to the memory map.
BUG=chrome-os-partner:31293
BRANCH=None
TEST=With the changes for adding non-cacheable memory range and adding DMA
region, booting from USB reaches same point as MMC.
Change-Id: I82d97840fad8cc96bf958c6efa13d2fdc1233d79
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b182651a1b6db1a7adbf315b6865467590a0785c
Original-Change-Id: I6a465eaa77e0d5ab4d5fb22161e88e7a5fd9c4a8
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/212193
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8928
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Pull out the common usb setup utmip functions from t124 into tegra usb.h. These
can be reused for t132 as well.
BUG=chrome-os-partner:31293
BRANCH=None
TEST=Compiles successfully for nyan, big and blaze
Change-Id: Idddd40e409b56875436db6918d05f2889d83870b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 12f12cb30a033cce645f53457d13a987aeec22a1
Original-Change-Id: I83f83bafad0f52ad651fe5989430f41142803f2b
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211200
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8927
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Currently ryu needs a DMA region in order to communicate with
USB devices. Therefore, add that region to the memory map.
BUG=chrome-os-partner:31293
BRANCH=None
TEST=With usb added am able to talk to a USB mass storage device
albeit inconsistently.
Change-Id: I7efaf2ba44cc94dc64af3f1cd916bdc5c7ff0795
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e93389479518ee28dc3477da0c6e6e33fa8a47d1
Original-Change-Id: I6b5c052ccaafce30705349e07639dffbb994901f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/212162
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8926
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use funitcfg api for bootblock, romstage as well as ramstage
initialization in rush.
BUG=chrome-os-partner:31251
BRANCH=None
TEST=Compiles successfully and boots till last known good point.
Change-Id: I243597de9ec13904a2bb58a04b402f9545424760
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0618ea6828bae3e700b85b79b185aec28568b8ae
Original-Change-Id: I8f5801c1c214f05ef9d2ba976838605da2d8b914
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211766
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8922
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Two changes: 1. A44 ID straps use different gpio pins than nyan.
2. A44 uses tristate values instead two state values.
BUG=none
BRANCH=none
TEST=Built and tested on A44 board.
Change-Id: I6a36f6da0c9f6168780606ba76595c7a0af8e8bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2eb0cae0e3396da1eaeaa72411c4b74300138a7b
Original-Change-Id: Ia2a4309d3b63b0a94d79465dd727b01fae01e1b9
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211753
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8920
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
nyan blaze fails to boot because tristates of the board id are interpreted in
the reverse order. this change fixes it.
BUG=none
TEST=Booted Blaze to Linux. Built firmware for Storm.
Branch=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I4ff8a15cf62869cea22931b5255c3a408a778ed2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3f59b13d615a8985edf2029d89af05e95aefad33
Original-Change-Id: I6d81092becb60d12e1cd2a92fc2c261da42c60f5
Original-Reviewed-on: https://chromium-review.googlesource.com/211700
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/8980
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The name was changed due to review comments misunderstanding, it
should be restored to properly convey what the function does.
BUG=chrome-os-partner:30489
TEST=verified that Storm still properly reports board ID
Change-Id: Iba33cf837e137424bfac970b0c9764d26786be9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c0fff28c6ebf255cb9cf9dfe4c961d7a25bb13ff
Original-Change-Id: I4bd63f29afbfaf9f3e3e78602564eb52f63cc487
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211413
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8979
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Replace previous 528MHz BCT. This BCT contains four entries as below:
0: Samsung
1: Hynix
2: Micron
3: (spare) 528MHz Micron
BUG=none
BRANCH=none
TEST=Built and tested on Micron LPDDR.
Change-Id: Ibe9e299ac1dd4cabd390b2e78bbec6c0f3a3871b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3fcb3e82998c88220e87118efff0595ba3572e38
Original-Change-Id: I49e18ca8dc69f2ce9ded71f4f55c02a8b91f92b2
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211479
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://review.coreboot.org/8919
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:29981
BRANCH=None
TEST=Built and booted through depthcharge on ryu
Change-Id: I79373a171922bffacb56f8ba2c0f8d40d0215963
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d635c8b67658fa95ab2688eac926334849c286a2
Original-Change-Id: I129c17045db95732aa7d548ba6dde754937fdb08
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211192
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8918
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The current 2 boards were setting up clocks and enabling
peripherals that apply to the SoC generically. Therefore,
move the common pieces into the SoC code.
BUG=chrome-os-partner:31105
BRANCH=None
TEST=Built and booted through depthcharge on ryu.
Change-Id: I94ed4b5cc4fafee508d86eefe44cf3ba6f65dc3b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6dad573c8689b79bb4aa615811a10f44e7d8c809
Original-Change-Id: I6df1813f88362b8beaf1a716f4f92e42e4b73406
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211191
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://review.coreboot.org/8917
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The I2C pads connected to the EC are pulled to 3.3V. Therefore
the pads need to be configured as open drain.
BUG=chrome-os-partner:29981
BRANCH=None
TEST=Built and booted through depthcharge on ryu
Change-Id: Ie5eadfe6aca78eb31fbca4e8d8117d1061acbbec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1530e7e7f500be47355eada56591ac2dbf1e9326
Original-Change-Id: Ia4ad2377d01296235fc7efbba72fa790016c04af
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211135
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8916
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Ryu's EC talks proto v3 over i2c. Select the correct protocol.
BUG=chrome-os-partner:31148
BRANCH=None
TEST=Built and ran on ryu. Coreboot can speak to the EC now.
Change-Id: Iaed0d2db3c3c93667d65beea98b9719bdbbbfe41
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b71cad3bb1e9b64c48b6f2eeb7573c408a508fb3
Original-Change-Id: I50e192cd58f7a29103ab94afc002da18822d4080
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211240
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8915
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the supporting Kconfig options and infrastructure for
performing vboot firmware verification.
BUG=chrome-os-partner:30784
BRANCH=None
TEST=Built and ran on ryu into depthcharge noting vboot paths
being taken.
Change-Id: I1d803208cd5789bd73244b91beac6a5a4598ea70
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a2e7d84725739843a1ed1868fcadebb60477a6dc
Original-Change-Id: Ie4c8c3939990a12fc528423948b236230392eb7c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211134
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8914
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
coreboot already has a reset API. Utilize it by selecting
HAVE_HARD_RESET. The tegra132 boards have to provide the
hard_reset() implementation as that involves board-specific
bits. The tegra132 code then provides a cpu_reset() routine
that just promotes that call to a hard_reset().
For the existing tegra132 boards remove the unnecessary files
from the build.
BUG=chrome-os-partner:30784
BRANCH=None
TEST=Ensured hard_reset() does something on Ryu.
Change-Id: I6d5aa928fec95b361175e35e0a26812829ffdfc3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 31edd4ff7486ded87d2525cd360d48959b6aef7c
Original-Change-Id: I1e1b014062dafb5d81fb9da40006c5405073a95d
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211131
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8911
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Now that there's a working udelay() in tegra132, upclock
CAM_I2C and SPI1 to the same speeds as used on Nyan.
BUG=chrome-os-partner:30998
BRANCH=rush_ryu
TEST=Built Rush and tested, no nack errors seen.
Change-Id: If1ee6d5c711252e294818d6263732bb34b2fe6f0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 859c0d4fde2cf098cb829e96a5d6dec394bea600
Original-Change-Id: I58fd03ed3512c2498c793cfe30b0c302e4b0e3d4
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211043
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8910
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:29981
BRANCH=None
TEST=Compiles successfully and boots until kernel FIT header error as before.
Change-Id: Ib4160b622c15cc5e4230bb43688a825ef68a69f0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4fed2969242909921dc843de063e67b3769d1786
Original-Change-Id: I5637b84d5153c745b4a07a4bf8c72ae1e6f2f21c
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211033
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8909
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These are used by the LPDDR3 code in sdram.c.
Based on the schematic and email, I've filled in 4 slots
in sdram_configs.c. My A44 returns RAMCODE 0 (using only bits
1:0) for Samsung SDRAM. I haven't tested the other 2 types of
RAM (Hynix and Micron). The 4th slot is a fallback slow Micron
config.
Previously existing configurations were dropped.
BUG=chrome-os-partner:29921
BUG=chrome-os-partner:31031
BRANCH=None
TEST=Built for rush and rush_ryu.
Change-Id: I55a737db269fe5fac1565d58bd8f8afcbc5beecb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9a431466171a85a5c8151e7466eb5f77862e7b44
Original-Change-Id: If216096ffc9e9836b6d082ad0668640b3eec37b7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Id: a45e7788dd78697ac5f48b6cc64108ca0e4912dd
Original-Change-Id: Ib7e8b814eb6dadb9b366536721876a3eeba0d2c0
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216000
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8976
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add in the following BCTs to source code tree:
Hynix 4GB 924MHz BCT
Micron 4GB 924MHz BCT
Samsung 4GB 924MHz BCT
BUG=none
BRANCH=none
TEST=Built and tested Micron 924 bct on A44 board with Elpida memory chip.
Change-Id: I59a5cc1133bf41a51f40a771ff0a7b7ef8d549fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0a72f1b704928fad341bda460ecc349914ec612c
Original-Change-Id: I9e5b54c3eb7ee4c4010b5aaf5dad030eba75108b
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210872
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://review.coreboot.org/8904
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:29981
BRANCH=None
TEST=Built.
Change-Id: I84abb36d4b39b60837b68c24f5cacffb74c1a985
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 42a5d3a8a8c46b20361522bc5cb1c1faafaae0cc
Original-Change-Id: Ib3ee8a14a34d0a2e73f3b912879eb65ac2d97c50
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210900
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:29981
BRANCH=None
TEST=Built and ran on rush like before.
Change-Id: I8182051314bea1ebfed1ce5346eaa1588daa2b59
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5ec4e7156ce1315c9a6bc6c5e5426cad9b0ef142
Original-Change-Id: Ied3eb82fc1eb656f92875cf4a508de16fb1bc65b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210839
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8902
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of calling out with function names all the possible
combinations of interface and device provide one call to the
mainboard to configure all the necessary bits.
BUG=chrome-os-partner:31104
BUG=chrome-os-partner:31105
BRANCH=None
TEST=Built and ran on rush.
Change-Id: Id7817e85065884d64f90ac514bf698bf539f2afe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f4f63f5965d403a32872d7b52c180694f5ef679d
Original-Change-Id: Id27d9c2da4dccdff38c48dc5cdeb1a68cf23cbfc
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210838
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8901
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:31032
BRANCH=None
TEST=Compiles successfully
Change-Id: I5c9fa9e613cc24f3f9f17330c5453cdd4306b92a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d7ba56b2459889ef24a9ce7331476c258c8b10d3
Original-Change-Id: I97da77c4f2ec3934066916c62491335a6536a85c
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210435
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://review.coreboot.org/8899
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31032
BRANCH=None
TEST=Compiles successfully and ec error fixed while booting.
Change-Id: I7bb78b8986931407ee67f33e83b9d887bea7ac70
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5447adb964276b9e13399ac93140ae763a149aad
Original-Change-Id: I02172a30863b7b97892289e880c29f2d71220fda
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210436
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8898
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Rush has its EC on SPI, and Ryu has it on I2C, so need both
mainboard_init_ec_spi and mainboard_init_ec_i2c in both builds,
due to romstage.c being in the common tegra132 subdir.
BUG=none
BRANCH=rush_ryu
TEST=Built both rush and rush_ryu images OK. Will try to
boot on Ryu later.
Change-Id: Iddbf9e9f6de7ba7244f9dd2e810fb6178937c85a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4d8b81717c366d19b43964bed3c4047598db4495
Original-Change-Id: I48d9530697d5669177ecd9ba3c34360197002003
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210595
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8900
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Switch over to the padconfig API for bootblock PAD configurations.
Aside from support code, each entry is 4 bytes. The open coded
calls were 12 bytes each.
BUG=chrome-os-partner:29981
BRANCH=None
TEST=Built for ryu.
Change-Id: Iff981509f258c8fe7bbc2e24ce87bad0c43a55b8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8a7ee469124eeb6d05b978b5e68a2fc03b102f47
Original-Change-Id: I2d32d702da38bc0d87a1c159113bba32f4c03407
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210837
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8879
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Switch over to the padconfig API for bootblock PAD configurations.
Aside from support code, each entry is 4 bytes. The open coded
calls were 12 bytes each.
BUG=chrome-os-partner:29981
BRANCH=None
TEST=Built and ran on rush. Observed consistent results.
Change-Id: Ibfa6fc188a7c503cfad41420ed50c7a88fdec579
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2245478f8e21167e93a6e97b12730788a7f927ae
Original-Change-Id: I1d5d38322bda6740a0ea50b89f88b722febdee22
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210836
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8878
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of hard coding certain pieces of a board in the common
chipset code provide a way to initialize things early in the
bootblock path. Add a bootblock_mainboard_early_init() function
before console init to performany necessary mainboard initialization
early in the bootblock.
BUG=chrome-os-partner:31104
BUG=chrome-os-partner:31105
BUG=chrome-os-partner:29981
BRANCH=None
TEST=built both on rush and ryu. rush still behaves the same.
Change-Id: Idcf081eeffd189a4e2cbfeb8a4ac5dd0a3d1f838
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4a523add6de03bea0d88e95b9dbb5e283c629400
Original-Change-Id: I7d93641dff3a961f120e8f0ec2d959182477ef87
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210835
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8877
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
this change implements hard_reset, which resets the board.
BUG=none
TEST=Booted Pinky
BRANCH=none
Change-Id: Iefb9d96fbddc77892191b62cc2bd0fe6054c3857
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 17633fc8d4132d99c5b4f9f208bf9bd0fbb0773b
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Ia375644be01aa4c2c078ba8c7df94e316d155402
Original-Reviewed-on: https://chromium-review.googlesource.com/219624
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/8874
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
this change adds missing config values needed to access fmap and tpm.
BUG=None
TEST=Booted Veyron Pinky
BRANCH=None
Change-Id: If74ebe84bd9117edd70f62f67a1745e71bbbcdb7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 58d2f40c853b2b698bedc96c1d7000cd4eeb2f8d
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I534d060c9e61a9cfd1ee4efe709cf1e30ca2663f
Original-Reviewed-on: https://chromium-review.googlesource.com/218874
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8873
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The Rk808 PMIC is a part that will probably be used by most Rk3288
boards, so it makes sense to keep it as common code in the the SoC
directory. This patch puts LDO control functions into rk3288/rk808.c, so
that the mainboard only has to call a simple interface to set up the
specific LDOs it requires.
BUG=chrome-os-partner:30167
TEST=Booted both this and the old version with a stubbed-out
i2c_writeb(), ensured that the final values are the same.
Change-Id: I7efa60f8a357ce6be7490e64d2e0e3f72ad16f1c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4df22cd78ee04fefc6f7fa0e5c3d903eb1794422
Original-Change-Id: Ic172f9c402e829995f049726d3cb6dbd637039d1
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217598
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8871
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This patch adds code to read the board ID from Pinky and put it into the
coreboot table.
(Note: This implementation differs slightly from Tegra since it pinmuxes
the GPIOs inside board_id(). That means the pinmuxing might be set more
than once if called in multiple stages, which is perfectly harmless and
in my opinion cleaner than having to (remember to) do it manually in one
of the per-stage files.)
BUG=chrome-os-partner:30167
TEST=With depthcharge patch, select -rev1 device tree for board ID 0.
Change-Id: I265fafcb176a31a46f7792ecf352f1671be7dd41
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9da10ce8b62ec98243fc7c82544b3004316799a8
Original-Change-Id: I5b5689373e1e47b1e0944b5fe5f2e70a285b931f
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217675
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8870
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
We retroactively decided to use the variant name "pinky" for the Rk3288
board we're currently bringing up, and retcon the unadorned "veyron"
name to refer to the Rockchip evaluation board. Since we currently have
no interest to maintain coreboot support for that board in our tree,
let's rename everything to "veyron_pinky" and forget about "veyron".
CQ-DEPEND=CL:217592
BUG=chrome-os-partner:30167
TEST='emerge-veyron libpayload coreboot' fails but
'emerge-veyron_pinky libpayload coreboot' succeeds.
Change-Id: I88bf5cc2da7c2f969ea184b5f12affaa94045a06
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aa8ec24b63d11798fec1993091b113a0c0938c7a
Original-Change-Id: I366391efc8e0a7c610584b50cea331a0164da6f3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217674
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8869
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:29778
TEST=Build coreboot
Change-Id: I877b4bf741f45f6cfd032ad5018a60e8a1453622
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 640da5ad5597803c62d9374a1a48832003077723
Original-Change-Id: I805d93e94f73418099f47d235ca920a91b4b2bfb
Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209469
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8867
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Supports DDR3 and LPDDR3.Supports dual channel.ddr max freq is 533mhz.
ddr timing config file in src\mainboard\google\veyron\sdram_inf
Remove dpll init in rk clk_init(), add rkclk_configure_ddr(unsigned int hz).
BUG=chrome-os-partner:29778
TEST=Build coreboot
Change-Id: I429eb0b8c365c6285fb6cfef008b41776cc9c2d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 52838c68fe6963285c974af5dc5837e819efc321
Original-Change-Id: I6ddfe30b8585002b45060fe998c9238cbb611c05
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209465
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8865
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:29778
TEST=Build coreboot
Change-Id: Ica7b2bf2cf649c2731933ce59a263692bb2c0282
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ba9c36daedc749748f45e68a84f8c34c636adb1c
Original-Change-Id: Ia0e4e39d4391674f25e630b40913eb99ff3f75c4
Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209427
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8862
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With CONFIG_RETURN_FROM_VERSTAGE false, the verstage loads the romstage over
the bootblock, then exits to the romstage. this is necessary for some SOC
(e.g. tegra124) which runs the bootblock on a different architecture.
With CONFIG_RETURN_FROM_VERSTAGE true, the verstage returns to the bootblock.
Then, the bootblock loads the romstage over the verstage and exits to the
romstage. this is probably necessary for some SOC (e.g. rockchip) which does not
have SRAM big enough to fit the verstage and the romstage at the same time.
BUG=none
TEST=Built Blaze with USE=+/-vboot2. Ran faft on Blaze.
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I673945c5e21afc800d523fbb25d49fdc83693544
Original-Reviewed-on: https://chromium-review.googlesource.com/212365
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Note: This purposefully is probably broken in vendorcode/google/chromeos
as I'm just trying to set a base for dropping more patches in. The vboot
paths will have to change from how they are currently constructed.
(cherry picked from commit 4fa17395113d86445660091413ecb005485f8014)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I9117434ce99695f9b7021a06196d864f180df5c9
Reviewed-on: http://review.coreboot.org/8881
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
this change reduces the code duplication of the bootblock and the romstages for
Nyans.
BUG=none
TEST=Built Nyan, Big, and Blaze. Ran faft on Blaze.
BRANCH=none
Original-Signed-off-by: dnojiri@chromium.org (Daisuke Nojiri)
Original-Change-Id: Ieb9dac3b061a2cf46c63afb2f31eb67ab391ea1a
Original-Reviewed-on: https://chromium-review.googlesource.com/214050
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit f3413d39458f03895fe4963a41285f71d81bcf5f)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I912f63b12321aa26a7add302fc8a6c4e607330ef
Reviewed-on: http://review.coreboot.org/8880
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
TEST=Built Blaze with USE=+/-vboot2. Ran faft: CorruptBothFwAB,
CorruptBothFWSigAB, CorruptFwBodyA/B, CoccurptFwSigA/B, DevBootUSB, DevMode,
TryFwB, UserRequestRecovery, SelfSignedBoot, RollbackFirmware.
BUG=None
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I45a1efd4d55fde37cc67fc02642fed0bc9366469
Original-Reviewed-on: https://chromium-review.googlesource.com/205236
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 0a9e7f099251c33ce286fa8d704a3e021eac4d3e)
Change-Id: I5f61c03c66ca83a5837c14378905ba178aba5300
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8655
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
These boards are supposed to be able to determine the board ID at run
time based on GPIO settings.
BUG=chrome-os-partner:30489
TEST=verified that all boards build. Checked that storm proto0 reports
board ID of 0 on the console
Original-Change-Id: Iadd758a799d69e1e34579d7d495378856b64c45b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210119
(cherry picked from commit f4d41ddf906c1bf0d10da38011998fa0a630c332)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0d5f94d3428157a70f0a9d711b57432e3f796733
Reviewed-on: http://review.coreboot.org/8722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
storm uses three GPIOs in tertiary mode, such that proto0 returns
value of 8 when the GPIOs are interpreted as a single tertiary number.
Adjust the calculated value to return board ID of 0 on proto0, and
monotonously incrementing values on newer boards.
BUG=chrome-os-partner:30489
TEST=when enabled, the board ID value of zero is reported on the console.
Original-Change-Id: I2ff8fd5cbc8d568877b6f8bf220e146893f1e4be
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210118
(cherry picked from commit 6ba24f31583933f02be111c8767ae9df56537011)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I35ee218df35a0924d4bb8fcbc6c875450a609f24
Reviewed-on: http://review.coreboot.org/8721
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For the majority of Chrome OS boards there is no need to include board
ID calculation in any stage but ramstage, where the ID should be
available for inclusion into the coreboot table.
BUG=chrome-os-partner:30489
TEST=build only, no other tests yet
Change-Id: I1451d52382bc48cc126d40267e0f61712f4a6d4b
Original-Change-Id: Ib9c06698a399d31e79a9b14143343ba2ad46d0fb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210117
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 27dd40e85bfcd0a38f388bad4d79f5fbb77a7566)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8720
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add implementation of the GPIO API defined in src/include/gpiolib.h.
Also, clean up the GPIO driver, make it use pointers instead of
integers for register address.
This requires a touch in the SPI driver, where the CS GPIO is toggled
and in the board function where it enables USB interface.
BUG=chrome-os-partner:30489
TEST=tested with the following patches, observed proto0 properly read
the board ID.
Original-Change-Id: I0962947c6bb32a854ca300752d259a48e9e7b4eb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210115
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit e951f735001509d135cc61530ed0eecb5fc31a85)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8a612dce000931835054086c1b02ebfc43dc57d2
Reviewed-on: http://review.coreboot.org/8718
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Some platforms use tertiary interpretation of GPIO input state to
increase number of distinct values represented by a limited number of
GPIOs. The three states are
- external pull down (interpreted as 0)
- external pull up (1)
- not connected (2)
This has been required by Nvidia devices so far, but Exynos and
Ipq8086 platforms need this too.
This patch moves the function reading the tertiary state into the
library and exposes the necessary GPIO API functions in a new include
file. The functions are still supposed to be provided by platform
specific modules.
The function interpreting the GPIO states has been modified to allow
to interpret the state either as a true tertiary number or as a set
two bit fields.
Since linker garbage collection is not happening when building x86
targets, a new configuration option is being added to include the new
module only when needed.
BUG=chrome-os-partner:30489
TEST=verified that nyan_big still reports proper revision ID.
Change-Id: Ib55122c359629b58288c1022da83e6c63dc2264d
Original-Change-Id: I243c9f43c82bd4a41de2154bbdbd07df0a241046
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209673
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c79ef1c545d073eaad69e6c8c629f9656b8c2f3e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8717
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add basic board support for the ImgTec Danube Virtual Platform, which
emulates a system built around the Danube SoC.
Run this by loading coreboot.bimg into a flash device connected to SPFI1
chip select 0 & then executing the Danube boot ROM.
BUG=chrome-os-partner:31438
TEST=none yet
Change-Id: Ia62af62804bab261f3cabf7c2e62f5bb08a4a1a4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6cb1017f5e2fec85f7f5c60cd2cfec63cc886b49
Original-Change-Id: I7a2b52f304bcb4b614440ec38975e05f38b0e590
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207976
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8766
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully. Depthcharge is able to see mmc.
Original-Change-Id: Ia0c9b432fa447c64fa13e5fae5a66a26bbc86360
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210002
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 4cb05ffa95a2a36c5b4606d2f0efe9e574b84e1d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7f9a27a4c0f0553e78fc1a289bffebbebd37c099
Reviewed-on: http://review.coreboot.org/8716
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Iniitialize I2C bus required for TPM operation. Problem observed was that if
frequency is raised above 20KHz, TPM starts responding with NAKs either for
address or for data. Need to look into that.
BUG=None
BRANCH=None
TEST=Compiles successfully and TPM success messages seen while booting.
Original-Change-Id: I9e1b4958d2ec010e31179df12a099277e6ce09e0
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210001
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 01e87ae35431147f442e3f3e531537b8f0de1c9d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7dddc39d77f9a726fa51dd58ea9b7712c9a6fae2
Reviewed-on: http://review.coreboot.org/8715
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Example output:
1:start of rom stage 542
2:before ram initialization 193,989 (193,447)
3:after ram initialization 3,319,114 (3,125,124)
4:end of romstage 3,320,004 (889)
Change-Id: Idcde7dc4c7a1d6c3118c82b67e8c2fcd4a07553b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8776
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Instead of sprinkling the cbfs calls around (as well as getting
return values incorrect) use the common run_romstage() to perform
the necessary work to load and run romstage.
Change-Id: Id59f47febf5122cb3ee60f9741cfb58cb60ccab5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8711
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of sprinkling the cbfs calls around (as well as getting
return values incorrect) use the common run_ramstage() to perform
the necessary work to load and run ramstage.
Change-Id: I37b1e94be36ef7a43efe65b2db110742fa105169
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8710
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
mainboards/amd/fam10: Initialize cbmem area after raminit
When GFXUMA is enabled, CBMEM is placed at TOM - UMASIZE
When GFXUMA is disabled, CBMEM is placed at TOM
This matches the behaviour present before conversion to early
CBMEM.
The CBMEM location code implicitly assumes TOM does not change
between romstage and ramstage. TOM is set by romstage raminit,
and is never changed by romstage or ramstage afterward. As
the CBMEM location is positioned at a specific offset from TOM
that is known to both romstage and ramstage early CBMEM is safe
on Fam10h systems.
TEST: Booted ASUS KFSN4-DRE and verified both cbmem timestamp
tables from romstage and cbmem log tables from ramstage.
Change-Id: Idf9e0245fe91185696ff664b06182c26b376c196
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8489
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
The GCC 4.9.2 update showed that the boot_state_init_entry
structures were being padded and assumed to be aligned in to an
increased size. The bootstate scheduler for static entries,
boot_state_schedule_static_entries(), was then calculating the
wrong values within the array. To fix this just use a pointer to
the boot_state_init_entry structure that needs to be scheduled.
In addition to the previous issue noted above, the .bs_init
section was sitting in the read only portion of the image while
the fields within it need to be writable. Also, the
boot_state_schedule_static_entries() was using symbol comparison
to terminate a loop which in C can lead the compiler to always
evaluate the loop at least once since the language spec indicates
no 2 symbols can be the same value.
Change-Id: I6dc5331c2979d508dde3cd5c3332903d40d8048b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8699
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
