| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: If50685505143ccbd51098e92de72545c71b24892
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6684
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
In case we get an invalid thermal reading, let's run the fan
at full speed rather than at low speed. This might impact the
user experiance slightly in cases where the bad reading does
not happen while the system is hot, but it will increase stability
in the cases where the system is actually overheating.
Also, set the critical temperature below tjmax, because otherwise
thermal shutdown by the OS will never be triggered.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: Iab262f1f17a5dff875c596d9e8d50e4e50ee90f9
Reviewed-on: https://chromium-review.googlesource.com/188556
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 721fc2361ea9c6fea75409be57726294ce840f03)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6962
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The products having shipped, and living in their own branch,
we might as well enable native graphics since:
1. it works
2. it removes a blob and the only good blob is a dead blob
3. it's faster
4. when we have problems, we can diagnose them more easily
5. when we get to newer kernels the boot time will magically get faster
as the driver realizes graphics is running. Where else do you get a 3-4 second
speedup for free?
Change-Id: Iad937320e7f46b1de7ab00dace04115a7f182ed1
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/181225
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 7b567d87a9fcf6736e90e730bd052e4465d57bdf)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6912
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The name snow goes by in many places in chromeos is daisy. Snow is technically
a variant of daisy and should really be called daisy_snow, but for historical
reasons the daisy board with no variant was used instead. To make it easier to
work with within chromeos, this change renames the snow board to daisy.
Change-Id: I569b31bf417db55be91832f15271bea4bc30f163
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/183553
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 13f24d967251c18dce2a00bcea915f448c4c6aa7)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6929
Tested-by: build bot (Jenkins)
|
|
not mainboards
Historically we had set panel timing in the mainboard gma code. This goes
back to the replay-attack video startup.
We can let the haswell gma code set these values from the device tree
settings.
Change-Id: If32150d2857241ca2d2c88880086f49d25815d76
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/180521
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 406eab3ca6a9bc59382866817786bf96bbb19d56)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6911
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The name pit goes by in many places in chromeos is peach_pit, where peach is
the base name and pit is the name of this particular variant. To make it
easier to work with within chromeos and to make the board names a little less
ambiguous, this change renames the pit board to peach_pit, and from Pit to
Peach Pit.
Change-Id: I51c89ba3785cf4cb9769a989b1cac71bcd1b0a05
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/183552
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit cbbe1e9f04e34436a1bbae28628e0b5630d41054)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6928
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The nyan_big mainboard is very similar to nyan, but will be different in a few
ways. For instance, the BCT will be different, and the GPIOs may need to be
configured slightly differently.
This change also adds prefixes to the kconfig variables in "choice" blocks
for both boards since having multiple instances of choice blocks with the same
options confuses kconfig even if all of the instances have mutually exclusive
dependencies.
Change-Id: I290a32e47fc118bd4b86d543df617ad324325dbc
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/183532
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d1a453fe1aa68b3d12936dd48cc6c94b54f81579)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6927
Tested-by: build bot (Jenkins)
|
|
Commit 75c83870 (azalia: Shrink boilerplate) [1] removed the header
file `hda_verb.h`. This header is still included in the mainboard’s
`gma.c`, causing the following build error, when native graphics
initialization is enabled.
CC mainboard/google/falco/gma.ramstage.o
src/mainboard/google/falco/gma.c:34:22: fatal error: hda_verb.h: No such file or directory
This was not caught, as native graphics initialization is not enabled
for the build tests.
It turns out that the array `mainboard_cim_verb_data` is not used in
`src/mainboard/intel/wtm2/hda_verb.h`, so fix the problem by removing
the inclusion.
[1] http://review.coreboot.org/6840
Change-Id: I91e4f00a3030bdef0278102df2783258389bca13
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6946
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Commit 75c83870 (azalia: Shrink boilerplate) [1] removed the header
file `hda_verb.h`. This header is still included in the mainboard’s
`i915.c`, causing the following build error, when native graphics
initialization is enabled.
CC mainboard/intel/wtm2/i915.ramstage.o
src/mainboard/intel/wtm2/i915.c:34:22: fatal error: hda_verb.h: No such file or directory
This was not caught, as native graphics initialization is not enabled
for the build tests.
It turns out that the array `mainboard_cim_verb_data` is not used in
`src/mainboard/intel/wtm2/hda_verb.h`, so fix the problem by removing
the inclusion.
[1] http://review.coreboot.org/6840
Change-Id: Ic902581c6809a1069e169cc874678146a24d75f3
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6945
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: Ic724dcf516d9cb78e89698da603151a32d24e978
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6814
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
tegra124: use pll_c_out1 as sclk parent
Reviewed-on: https://chromium-review.googlesource.com/180865
(cherry picked from commit 418337a5bde70df6a770222201c51bf3e8892d5f)
tegra124: take LP cluster out of reset
Reviewed-on: https://chromium-review.googlesource.com/180866
(cherry picked from commit 74cdc68ea9b29da9af313635787e82bacb9e23e3)
tegra124: norrin: display code clean up
Reviewed-on: https://chromium-review.googlesource.com/181003
(cherry picked from commit 63843ec61b3b47ffc985edcb589771591c5c9f17)
tegra124: Change the display hack to use window A
Reviewed-on: https://chromium-review.googlesource.com/182001
(cherry picked from commit ef245e42eb17b2eb0e8712f252353a95ee6fc01a)
tegra124: norrin: Initialize frame buffer
Reviewed-on: https://chromium-review.googlesource.com/182090
(cherry picked from commit b7c1d1b3c9519cbbe1615737aed4c4c0efed2167)
nyan: do not enable pull-ups on SPI1 (EC) data pins
Reviewed-on: https://chromium-review.googlesource.com/181063
(cherry picked from commit 2f55188501ebcae9e01b12831f152d4520c7047c)
tegra124: Add source for the LP0 resume blob.
Reviewed-on: https://chromium-review.googlesource.com/183152
(cherry picked from commit a00d099bf710c297320d7edff7f7c608283d1b0b)
tegra124: Revise Memory Controller registers structure definition.
Reviewed-on: https://chromium-review.googlesource.com/182992
(cherry picked from commit ae83564cdd1d46c8166df1a95703e8cb1060c0a1)
tegra124: Add more PMC register details.
Reviewed-on: https://chromium-review.googlesource.com/183231
(cherry picked from commit d62ed2c19693284f10c2a12f4295091de3ace829)
tegra124: Add SDRAM configuration header file from cbootimage.
Reviewed-on: https://chromium-review.googlesource.com/182613
(cherry picked from commit 193ed2a104af38f6c41a332a649ce06a3238e0a4)
tegra124: Revise sdram_param.h for Coreboot.
Reviewed-on: https://chromium-review.googlesource.com/182614
(cherry picked from commit 311b0568c5de627435a5b035a7a1e40ecc2672f8)
tegra124: Fix EMC base address.
Reviewed-on: https://chromium-review.googlesource.com/183602
(cherry picked from commit 587c8969292ccecfa29c7720bcf24c704ed4ac4e)
tegra124: Add EMC registers definition.
Reviewed-on: https://chromium-review.googlesource.com/183622
(cherry picked from commit 67a8e5c7e87a1cc6bf006ad806751b549ffd3d5a)
tegra124: Never touch MEM(MC)/EMC clocks in ramstage.
Reviewed-on: https://chromium-review.googlesource.com/183623
(cherry picked from commit 8e3bb34d4ae37feae89b4a39850b2988a334d023)
tegra124: use RAM_CODE[3:2] for ram code
Reviewed-on: https://chromium-review.googlesource.com/183833
(cherry picked from commit 0154239467064ffcbdb82fc4c6b629f5d0c3568d)
tegra124: Allow setting PLLM (clock for SDRAM).
Reviewed-on: https://chromium-review.googlesource.com/183621
(cherry picked from commit a534e5b7c61d655eedd409dbd7780a4f90d40683)
tegra124: SDRAM Initialization.
Reviewed-on: https://chromium-review.googlesource.com/182615
(cherry picked from commit 5a60ae93b0603ee0d4806132be0360f3b1612bce)
tegra124: Get RAM_CODE for SDRAM initialization.
Reviewed-on: https://chromium-review.googlesource.com/183781
(cherry picked from commit a5b7ce70525d7ffef3fac90b8eb14b3f3787f4d8)
Squashed 18 nyan/tegra commits for memory and display.
Change-Id: I59a781ee8dc2fd9c9085373f5a9bb7c8108b094c
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6914
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
When CONFIG_CHROMEOS is enabled, both systems currently fail to build
romstage due to undefined symbols.
Change-Id: I0edcb141b9a79fad6b1a629bf77cae656c3d6319
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6873
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
baytrail: combine SPI configuration in romstage
Reviewed-on: https://chromium-review.googlesource.com/185140
(cherry picked from commit 4e7f0e8ae1138e478ae7106d54719cf05e13b402)
baytrail: lock down registers before handoff
Reviewed-on: https://chromium-review.googlesource.com/185200
(cherry picked from commit 82cce4d2b46ccc554b71efa179b5d95756e2ad5e)
baytrail: invoke SMM finalization on handoff
Reviewed-on: https://chromium-review.googlesource.com/185201
(cherry picked from commit 1b50affb1fdda52a5986c9429713930ed517a86a)
rambi: don't invoke SMM finalization
Reviewed-on: https://chromium-review.googlesource.com/185202
(cherry picked from commit 6eff475dae7f4536eb846ccf6d51fce262b8ffef)
rambi: remove handling of APM_CNT_FINALIZE
Reviewed-on: https://chromium-review.googlesource.com/185203
(cherry picked from commit 9fc310d7e2730466cc7fcc84999502a2d4d08bab)
baytrail: don't increment boot count on S3 resume
Reviewed-on: https://chromium-review.googlesource.com/185381
(cherry picked from commit 940a0fa4df1ce335229eb6f80143b93a84ba358c)
rambi: enable HDA device
Reviewed-on: https://chromium-review.googlesource.com/184574
(cherry picked from commit 334f2a5c7c6540e744b6aaf7e1da0b55e1368196)
baytrail: lock down spi controller according to mainboard
Reviewed-on: https://chromium-review.googlesource.com/185631
(cherry picked from commit 696ece68cb6d522c248e800f168e675e4b4a7317)
rambi: implement mainboard_get_spi_config() to lock dow spi controller
Reviewed-on: https://chromium-review.googlesource.com/185632
(cherry picked from commit 1d9ba15858fd421a4fe5a47f7171273128e89524)
baytrail: introduce ssus_disable_internal_pull()
Reviewed-on: https://chromium-review.googlesource.com/185740
(cherry picked from commit 9d6056dd70b27183dab6a4656f4f9612ae870a4d)
rambi: fix write-protect gpio reading at romstage
Reviewed-on: https://chromium-review.googlesource.com/185741
(cherry picked from commit c64627689b1afec59be6fdab323d5492046f0bc7)
baytrail: DPTF: implement charger current limit
Reviewed-on: https://chromium-review.googlesource.com/185759
(cherry picked from commit 287e8936613a7a83281ff692b20383dacf7fcaf6)
rambi: Enable charger participant and define states
Reviewed-on: https://chromium-review.googlesource.com/185760
(cherry picked from commit 2f62a11927ecf10cb2c76a9f5d368d4050404137)
baytrail: increase command wait timeout
Reviewed-on: https://chromium-review.googlesource.com/185874
(cherry picked from commit 962a79ef72169b5d52fc746d1889d3b652fd9bcc)
baytrail: make caching MRC data more robust
Reviewed-on: https://chromium-review.googlesource.com/185875
(cherry picked from commit b5e10ad47b9e4f330caaee4faf69702f24d6bdd8)
baytrail: upgrade MRC wrapper header
Reviewed-on: https://chromium-review.googlesource.com/186391
(cherry picked from commit 8c1a62f1f4261d4f38aacbbb353c9d6218ec2885)
rambi: instruct MRC to use weaker memory ODT settings
Reviewed-on: https://chromium-review.googlesource.com/186420
(cherry picked from commit b9329126ca08d20ce1d8c5db0fcabd39140c7292)
rambi: Move touch wakeup resource GPIO to separate device
Reviewed-on: https://chromium-review.googlesource.com/186932
(cherry picked from commit ba44e2e04f9469c629cb61a911c8cd339f52b0ef)
baytrail: Set some MSRs related to turbo power
Reviewed-on: https://chromium-review.googlesource.com/186933
(cherry picked from commit 76b25df5a31914ae58d47d17af448216011e425c)
baytrail: change power consumption number for ACPI_C3/C6FS.
Reviewed-on: https://chromium-review.googlesource.com/186934
(cherry picked from commit 5192e2464fbb88ea6fc117070240c9733e34f065)
baytrail: Fix use of ConcatenateResTemplate() in ACPI LPE device
Reviewed-on: https://chromium-review.googlesource.com/186928
(cherry picked from commit 8d1ab5de1d43b0790d140f6d0e36a990a5049ece)
baytrail: Disable P-state HW coordination on 4-core SKU
Reviewed-on: https://chromium-review.googlesource.com/187575
(cherry picked from commit c19c0f1d7cb3cb2635766c186ba9598933424a78)
baytrail: DPTF: Enable mainboard-specific _PDL
Reviewed-on: https://chromium-review.googlesource.com/187576
(cherry picked from commit 5412ac5c07bee22017a0ee6d1e2433917b98ea87)
rambi: Apply DPTF tuning parameters
Reviewed-on: https://chromium-review.googlesource.com/187577
(cherry picked from commit 932a5a3803ceaf430ad2934b371ac0886c25efca)
rambi : change lpe_codec_clk_freq to 19.2
Reviewed-on: https://chromium-review.googlesource.com/187594
(cherry picked from commit f64cb1ae77076ad5ec994670f4a83dc561ea80c4)
Squashed 25 commits for baytrail/rambi.
Change-Id: Ibe628ac974d117a09361f7f3131a488911ddd27d
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6933
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Default to do native VGA init since this machine is a laptop
and the user would likely want to use it as such. Also, if you
know what this is you know how to turn it off if you want to.
Change-Id: I55f91a48affbd0ec93b0bb0c88c531d15c32ba21
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6903
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
- Enable xhci_default setting in devicetree
- Enable usb_xhci_on_resume setting for PEI
Change-Id: I2a3965a222ce571a2ad43f568fc2d0ecb94a77bc
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180673
(cherry picked from commit c5ef875f6d148964b8ad62a3fe79916c758dbc57)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6908
Tested-by: build bot (Jenkins)
|
|
rambi: Change RAM_ID GPIOs to GPIO_INPUT
Reviewed-on: https://chromium-review.googlesource.com/182934
(cherry picked from commit 8afd981a091a3711ff3b55520fe73f57f7258cc0)
baytrail: initialize rtc device
Reviewed-on: https://chromium-review.googlesource.com/183051
(cherry picked from commit 1b80d71e4942310bd7e83c5565c6a06c30811821)
baytrail: Set SOC power budget values for SdpProfile 2&3
Reviewed-on: https://chromium-review.googlesource.com/183101
(cherry picked from commit 87d49323cac4492c23f910bd7d43b83b3c8a9b55)
baytrail: Set PMC PTPS register correctly
Reviewed-on: https://chromium-review.googlesource.com/183280
(cherry picked from commit 1b520b577f2bf1b124db301f57421665b637f9ad)
baytrail: update to version 809 microcode for c0
Reviewed-on: https://chromium-review.googlesource.com/183256
(cherry picked from commit 8ed0ef4c3bed1196256c691be5b80563b81baa5e)
baytrail: Add a shared GNVS init function
Reviewed-on: https://chromium-review.googlesource.com/183332
(cherry picked from commit 969dffda1d3d0adaee58d604b6eeea13a41a408c)
baytrail: Add basic support for ACPI System Wake Source
Reviewed-on: https://chromium-review.googlesource.com/183333
(cherry picked from commit a6b85ad950fb3a51d12cb91c869420b72b433619)
baytrail: allow configuration of io hole size
Reviewed-on: https://chromium-review.googlesource.com/183269
(cherry picked from commit 95a79aff57ec7bf4bcbf0207a017c9dab10c1919)
baytrail: add in C0 stepping idenitification support.
Reviewed-on: https://chromium-review.googlesource.com/183594
(cherry picked from commit 8ad02684b25f2870cdea334fbd081f0ef4467cd4)
baytrail: add option for enabling PS2 mode
Reviewed-on: https://chromium-review.googlesource.com/183595
(cherry picked from commit c92db75de5edc2ff745c1d40155e8b654ad3d49f)
rambi: enable PS2 mode for VNN and VCC
Reviewed-on: https://chromium-review.googlesource.com/183596
(cherry picked from commit 821ce0e72c93adb60404a4dc4ff8c0f6285cbdf9)
baytrail: add config option for disabling slp_x stretching
Reviewed-on: https://chromium-review.googlesource.com/183587
(cherry picked from commit f99804c2649bef436644dd300be2a595659ceece)
rambi: disable slp_x stretching after sus fail
Reviewed-on: https://chromium-review.googlesource.com/183588
(cherry picked from commit 753fadb6b9e90fc8d1c5092d50b20a2826d8d880)
baytrail: ACPI_ENABLE_WAKE_SUS_GPIO macro for ACPI
Reviewed-on: https://chromium-review.googlesource.com/183597
(cherry picked from commit 78775098a87f46b3bb66ade124753a195a5fa906)
rambi: fix trackpad and touchscreen wake sources
Reviewed-on: https://chromium-review.googlesource.com/183598
(cherry picked from commit 3022c82b020f4cafeb5be7978eef6045d1408cd5)
baytrail: Add support for LPE device in ACPI mode
Reviewed-on: https://chromium-review.googlesource.com/184006
(cherry picked from commit 398387ed75a63ce5a6033239ac24b5e1d77c8c9f)
rambi: Add LPE GPIOs for Jack/Mic detect
Reviewed-on: https://chromium-review.googlesource.com/184007
(cherry picked from commit edde584bb23bae1e703481e0f33a1f036373a578)
rambi: Set TSRx passive threshold to 60C
Reviewed-on: https://chromium-review.googlesource.com/184008
(cherry picked from commit 1d6aeb85fd1af64d5f7c564c6709a1cf6daad5ee)
baytrail: DPTF: Add PPCC object for power limit information
Reviewed-on: https://chromium-review.googlesource.com/184158
(cherry picked from commit e9c002c393d8b4904f9d57c5c8e7cf1dfce5049b)
baytrail: DPTF: Add _CRT/_PSV objects for the CPU participant
Reviewed-on: https://chromium-review.googlesource.com/184442
(cherry picked from commit e04c20962aede1aa9e6899bd3072daa82e8613bd)
rambi: Move the CPU passive/critical threshold config to DPTF
Reviewed-on: https://chromium-review.googlesource.com/184443
(cherry picked from commit dda468793143a6d288981b6d7e1cd5ef4514c2ac)
baytrail: Fix XHCI controller reset on resume
Reviewed-on: https://chromium-review.googlesource.com/184500
(cherry picked from commit 0457b5dce1860709fcce1407e42ae83023b463cd)
baytrail: update lpe audio firmware location
Reviewed-on: https://chromium-review.googlesource.com/184481
(cherry picked from commit 0472e6bd45cb069fbe4939c6de499e03c3707ba6)
rambi: Put LPSS devices in ACPI mode
Reviewed-on: https://chromium-review.googlesource.com/184530
(cherry picked from commit 52bec109860b95e2d6260d5433f33d0923a05ce1)
baytrail: initialize HDA device and HDMI codec
Reviewed-on: https://chromium-review.googlesource.com/184710
(cherry picked from commit 393198705034aa9c6935615dda6eba8b6bd5c961)
baytrail: provide GPIO_ACPI_WAKE configuration
Reviewed-on: https://chromium-review.googlesource.com/184718
(cherry picked from commit 44558c3346f5b96cf7b3dcb25a23b4e99855497b)
rambi: configure wake pins as just wake sources
Reviewed-on: https://chromium-review.googlesource.com/184719
(cherry picked from commit ee4620a90a131dce49f96b2da7f0a3bb70b13115)
baytrail: I2C: Add config data to ACPI Device
Reviewed-on: https://chromium-review.googlesource.com/184922
(cherry picked from commit ffb73af007e77faf497fbc3321c8163d18c24ec8)
Squashed 28 commits for rambi and baytrail.
Change-Id: If6060681bb5dc9432a54e6f3c6af9d8080debad8
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6916
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
There's no reason to keep maintaining support on this mainboard, since nobody has one.
Change-Id: I5c7c8ea4640170ba231fec82a94a54ee1876b845
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/180503
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit e291d82acbc8bf0d1372e11ac100a7dd340a0040)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6913
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Add a Kconfig variable so that driver code knows whether
or not to use dual-output reads.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I31d23bfedd91521d719378ec573e33b381ebd2c5
Reviewed-on: https://chromium-review.googlesource.com/177834
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit de6869a3350041c6823427787971efc9fcf469b8)
tegra124: implement x2 mode for SPI transfers on CBFS media
This implements x2 mode when reading CBFS media over SPI.
In theory this effectively doubles our throughput, though the initial
results were almost negligibly better. Using a logic analyzer we see
a pattern of 12 clocks, ~70ns delay, 4 clocks, ~310ns delay. So if we
want to see further gains here then we'll probably need to tune AHB
arbitration and utilization to eliminate bubbles/stalls when copying
from APB DMA.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I33d6ae30923fc42b4dc7103d029085985472cf3e
Reviewed-on: https://chromium-review.googlesource.com/177835
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 29289223362b12e84da5cbb130f285c6b9d314cc)
nyan: turn on dual-output reads for SPI flash
Nyan's SPI chip is capable of dual-output reads, so let's use it.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I51a97c05aa25442d8ddcc4e3e35a2507d91a64df
Reviewed-on: https://chromium-review.googlesource.com/177836
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 62de0889a9cfc5686800645d05e21e272e4beb5c)
Squashed three commits to enable dual output spi reads for nyan.
Also fixed the spi_xfer interface that has been updated to use bytes
instead of bits.
Change-Id: I750a177576175b297f61e1b10eac6db15e75aa6e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6909
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I80b7facfb9cc9f642dd1c766884dc23da1aab2c8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6800
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This patch adds stub implementations of exception_init() to all archs
so that it can be called from src/lib/hardwaremain.c. It also moves/adds
all other invocations of exception_init() (which needs to be rerun in
every stage) close to console_init(), in the hopes that it will be less
likely overlooked when creating future boards. Also added (an
ineffective) one to the armv4 bootblock implementations for consistency
and in case we want to implement it later.
Change-Id: Iecad10172d25f6c1fc54b0fec8165d7ef60e3414
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176764
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 2960623f4a59d841a13793ee906db8d1b1c16c5d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6884
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
tegra124: Set Tx FIFO threshold value to recommended setting
Reviewed-on: https://chromium-review.googlesource.com/175200
(cherry picked from commit c8f086711c6ae2db70fc8e0d84b54f5952fbe0ad)
tegra124: add CLK_X definitions
Reviewed-on: https://chromium-review.googlesource.com/175220
(cherry picked from commit 3f8a844bd2f151e06d82d1a7fac4492c6bc9417d)
tegra124: fix incorrect struct member in clk_rst.h
Reviewed-on: https://chromium-review.googlesource.com/175270
(cherry picked from commit 967193d5984a086c297988caa580b61cb4d0414c)
tegra124: add the _x clocks to clock_enable_clear_reset
Reviewed-on: https://chromium-review.googlesource.com/175539
(cherry picked from commit df4c515d73b02061e5c98f51efd50e04b10d63f5)
tegra124: add clock support code for graphics.
Reviewed-on: https://chromium-review.googlesource.com/175162
(cherry picked from commit b8eb6ab4cdc5a583636c10fa05f947a244f94819)
tegra124: Clean up some #defines for DMA
Reviewed-on: https://chromium-review.googlesource.com/175631
(cherry picked from commit 1a0a900f2d060916c9878781b82113b16a7945d9)
tegra124: enable flow control for APBDMA in SPI driver
Reviewed-on: https://chromium-review.googlesource.com/175630
(cherry picked from commit 873e6f9e95f6cb0162fa06216682fbc71ab0202d)
nyan: move clock setup for the display out of dca_init
Reviewed-on: https://chromium-review.googlesource.com/175656
(cherry picked from commit 32dd9947a60298ff9488c911629802c257ed6afc)
tegra124: more display PLL setup and clock hardcode removal.
Reviewed-on: https://chromium-review.googlesource.com/175732
(cherry picked from commit 80402876b5daa9e9389fd4fab5f539d89c37fa7f)
tegra124: move dp.c from tegra to tegra124
Reviewed-on: https://chromium-review.googlesource.com/175830
(cherry picked from commit e98be569b0ba7f4d565ce677343a317db08344e0)
tegra124: clean up tabbing; nyan: add a comment and setting to devicetree.cb
Reviewed-on: https://chromium-review.googlesource.com/175889
(cherry picked from commit 4e513196b0014c5a82079f3aa87c2efbeb645484)
tegra: get rid of struct members that are not used
Reviewed-on: https://chromium-review.googlesource.com/176023
(cherry picked from commit 032b8a0c9fe0152ebc27344e93128865ecb918a6)
tegra124: Increase SCLK (AVP) to 300MHz
Reviewed-on: https://chromium-review.googlesource.com/175489
(cherry picked from commit 7e082f2c2f030950d652f1f87f637e15dee38552)
tegra124: Address old main CPU starting review feedback.
Reviewed-on: https://chromium-review.googlesource.com/175933
(cherry picked from commit 1d76ac71bd839dff9198e65132ec25212dd55ffd)
tegra124: Revise clock source configuration for irregular peripherals.
Reviewed-on: https://chromium-review.googlesource.com/176109
(cherry picked from commit 1021c215190602a2b8c1ab97d6c8313d89597d99)
nyan: add timestamps in romstage
Reviewed-on: https://chromium-review.googlesource.com/176172
(cherry picked from commit cd626aa10b56cd4da6ebda36fe487e44b08f3935)
tegra124: Allow enabling clock output for external peripherals.
Reviewed-on: https://chromium-review.googlesource.com/176108
(cherry picked from commit ea9fb6393ee80da77c9fbc30f605859c7009c9ed)
nyan: Enable and configure clocks for I2S and audio codec.
Reviewed-on: https://chromium-review.googlesource.com/176104
(cherry picked from commit 1fb659b3e73285ff8218c0f229734edd3b979ca4)
tegra124: Fix typo in pinmux name.
Reviewed-on: https://chromium-review.googlesource.com/176215
(cherry picked from commit c7915ad41a3f1d1452aa6d6d287aaa8eb9e85c34)
nyan: Add pinmux settings for audio peripherals.
Reviewed-on: https://chromium-review.googlesource.com/176212
(cherry picked from commit 37412f3201590e47a06d4678fa833164d370b41c)
nyan: De-array-ify the PMIC setup code.
Reviewed-on: https://chromium-review.googlesource.com/176903
(cherry picked from commit 86ab1ce9fbf6d5362af1ee37de1394412366f247)
nyan: Add a kconfig for building for the original nyans in pixel cases.
Reviewed-on: https://chromium-review.googlesource.com/176904
(cherry picked from commit 1d05fd5bc40d727826510ec81496ce4a49e257ed)
nyan: Set the CPU voltage differently depending on which PMIC is in use.
Reviewed-on: https://chromium-review.googlesource.com/176905
(cherry picked from commit 31507f6a575220737ee5683b312cd162600f89cc)
nyan: Increase the CPU voltage to 1.2V.
Reviewed-on: https://chromium-review.googlesource.com/176906
(cherry picked from commit fe4795e66b515c2523df09a8800ecac9a3f63557)
tegra124: Flesh out/tidy up the flow controller constants.
Reviewed-on: https://chromium-review.googlesource.com/177085
(cherry picked from commit b50d315506a5ab9c81b6bbaf8cf580dbb3e78794)
tegra124: When leaving the bootblock/AVP, really stop the AVP.
Reviewed-on: https://chromium-review.googlesource.com/177086
(cherry picked from commit 06c10df889d4d935bc99792df860d93766ae44dd)
nyan: Set SPI4 speed to 33MHz
Reviewed-on: https://chromium-review.googlesource.com/177038
(cherry picked from commit c98de65482fabdb5c76944fe3bf762191b3a0a55)
nyan: Do console_init() in romstage
Reviewed-on: https://chromium-review.googlesource.com/176763
(cherry picked from commit 0bec32e09eab28bc5ea49b7896a8b6f489143b03)
nyan: Add a prompt to the CONFIG_NYAN_IN_A_PIXEL option.
Reviewed-on: https://chromium-review.googlesource.com/177486
(cherry picked from commit 7cbb801d000dac4b39f76266ebef2585fe48faba)
nyan: Separate the SDRAM BCT config for the two nyans, and turn down norrin.
Reviewed-on: https://chromium-review.googlesource.com/177487
(cherry picked from commit 6b119685f6626d79d924af9f856ebb90af45a73f)
tegra124: Bump up HCLK and PCLK
Reviewed-on: https://chromium-review.googlesource.com/177563
(cherry picked from commit c25337dac8c3ecdd8ffe5b4d11acebb216132405)
nyan: Add some code for reading the board ID.
Reviewed-on: https://chromium-review.googlesource.com/177488
(cherry picked from commit 5fccbce99e7db312e2e3caf806c438c9b04c0a8f)
nyan: Use the board ID to decide how to initialize the PMIC.
Reviewed-on: https://chromium-review.googlesource.com/177489
(cherry picked from commit 677bdb9df55248da3a0c6be0089098f6d6807d3c)
nyan: Create kconfig variables for each SDRAM config.
Reviewed-on: https://chromium-review.googlesource.com/177580
(cherry picked from commit d7ddcf262a321f06289c4f2b2a6b43982dd96377)
tegra124: Mux some unused pins away from UARTA, and pull up the serial RX line.
Reviewed-on: https://chromium-review.googlesource.com/177637
(cherry picked from commit bd533cc109b0acf3495b04fa6622e250ba454fe9)
tegra124: Initialize the MCR when setting up the UART.
Reviewed-on: https://chromium-review.googlesource.com/177638
(cherry picked from commit 38c84786fc3e8fab913aebca176ac7b038cb0be6)
tegra124: fix SPI AHB burst length
Reviewed-on: https://chromium-review.googlesource.com/177564
(cherry picked from commit f29235263202c9b4a3dbb65da5727c8eefe44315)
tegra124: remove unneeded debug print in SPI code
Reviewed-on: https://chromium-review.googlesource.com/177833
(cherry picked from commit 34a50040268dbde1c326d315f8042a3905ddfb06)
nyan: Set up the SOC and TPM reset pin.
Reviewed-on: https://chromium-review.googlesource.com/177965
(cherry picked from commit b81a5bd15a2979ee009b9f7bc4a39a304e6a759a)
tegra124: Allow some time for packets to appear in Rx FIFO
Reviewed-on: https://chromium-review.googlesource.com/177832
(cherry picked from commit 8f70a25b1eea865a448525749ac18393f5b9ad84)
nyan: PMIC: Slam default init values for SDOs/LDOs in AS3722
Reviewed-on: https://chromium-review.googlesource.com/178226
(cherry picked from commit c536b0d82fd6fffbc0e2448e0d19d3f06df5d86a)
nyan: change devicetree for the new display settings.
Reviewed-on: https://chromium-review.googlesource.com/177958
(cherry picked from commit 43abed730f222c8a685c250a58c981268994a65d)
nyan: Switch USB VBUS GPIOs from outputs to pulled-up inputs
Reviewed-on: https://chromium-review.googlesource.com/178914
(cherry picked from commit e47b6a609b9d23694a466b56960d9d14ca5d6242)
Tegra124: nyan: Disable VPR
Reviewed-on: https://chromium-review.googlesource.com/179327
(cherry picked from commit 441aa276446141f1b92ed8fb98c9578597487f4d)
tegra124: norrin: fix display issue
Reviewed-on: https://chromium-review.googlesource.com/179745
(cherry picked from commit c1c1ae69f6058ed901f532e2c532d1e6ba1f81fb)
tegra124: Add iRAM layout information.
Reviewed-on: https://chromium-review.googlesource.com/179814
(cherry picked from commit d00f135c93a52ad4dced2edecb74e2dfc54bb2fa)
tegra124: Run bootblock and ROM stage out of DRAM.
Reviewed-on: https://chromium-review.googlesource.com/179822
(cherry picked from commit 2d3ec06ec39a489d02e798bb22bce4d7465b20ce)
nyan: clean up a comment regarding video
Reviewed-on: https://chromium-review.googlesource.com/180161
(cherry picked from commit 03b5e88a66b9c96df2ef3d9ce5ba4a62a8bb2447)
tegra124: norrin: the first step to clean up display code
Reviewed-on: https://chromium-review.googlesource.com/180135
(cherry picked from commit 9d0c12dfef28a1161604df9b3fcc113049b2747d)
Squashed 49 commits for tegra124/nyan.
Change-Id: Id67bfee725e703d3e2d8ac17f40844dc193e901d
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6883
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ib3e09644c0ee71aacb067adaa85653d151b52078
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6840
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I80f1e27268d0be58514d110611fd3c18cbe81829
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6895
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I804aff0fa53609e5fc70301053f075aa54b9bde5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6893
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Add the option to coreboot to set the SeaBIOS buffers below 0xC0000.
This is a requirement on the Intel Rangeley processor
because it is designed so that only the processor can write
the higher memory areas. This prevents USB and SATA from bus-mastering
into the buffers when they're set in the typical 0xE0000 area.
This will be set to Y unless defaulted to N by the mainboard or
chipset.
Push the SeaBIOS buffers down to 0x90000 segment for Mohon Peak
Change-Id: I15638605d1c66a2277d4b852796db89978551a34
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6364
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I09a8fe94b33c3cc1da62f7a5a527944638bd6f0c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6877
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Upon S3 resume, the machine powers off due to the ME not being awake yet.
Change-Id: I0255dd0fa6b4cb3b539e11a69a618c770c44f4b0
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6876
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Tegra124: SDMMC: Configure base clock frequency.
Reviewed-on: https://chromium-review.googlesource.com/173841
(cherry picked from commit d3157e9a380cfb018cc69a1f23f277c3c5b680a6)
Tegra124: SDMMC: Configure pinmux for MMC 3/4.
Reviewed-on: https://chromium-review.googlesource.com/174011
(cherry picked from commit 55af9a86a56d6bc0ce9bcff4fd5226a60ae2033b)
tegra124: Move DMA-related #defines and definitions to header
Reviewed-on: https://chromium-review.googlesource.com/174444
(cherry picked from commit 9d917927a5b7151958289469b9049ac91efa41e3)
tegra124: Assign console address for kernel.
Reviewed-on: https://chromium-review.googlesource.com/174486
(cherry picked from commit 36e9370f30bd173879958d164156997841ec4e9c)
nyan: Fix up the gpio indices in chromeos.c.
Reviewed-on: https://chromium-review.googlesource.com/174418
(cherry picked from commit fba4ae1080c19f11abe1205b871ada14db996c61)
Nyan: turn on the backlight.
Reviewed-on: https://chromium-review.googlesource.com/174533
(cherry picked from commit 12649c9611981dd8d6567ba0238c8b8247c52215)
tegra124: Fix the disp1 source field.
Reviewed-on: https://chromium-review.googlesource.com/174701
(cherry picked from commit eed380e09075e1eef0bde7d1bb15c4343f30bfe0)
nyan: set up the aux channel i2c interface
Reviewed-on: https://chromium-review.googlesource.com/174620
(cherry picked from commit ea81cb44a1c11cd78643c69ac818304cd393749e)
tegra124: fix typos in the clock code.
Reviewed-on: https://chromium-review.googlesource.com/174684
(cherry picked from commit 72365c33693db4eb6e01032938221f592b7e5a02)
tegra124: Revamp clock source/divisor configuration
Reviewed-on: https://chromium-review.googlesource.com/174804
(cherry picked from commit 3f31a634f69595bcc6a473301d1492c97a767809)
tegra: Add gpio_output_open_drain() function
Reviewed-on: https://chromium-review.googlesource.com/174650
(cherry picked from commit bc1c28926810e722e9b82339ea0585d083e3fa8c)
tegra124: add nvidia-generated files
Reviewed-on: https://chromium-review.googlesource.com/174610
(cherry picked from commit 7706f3200f7fc11b7a443f336bff6a37afa94652)
nyan: Ignore the dev mode GPIO.
Reviewed-on: https://chromium-review.googlesource.com/174837
(cherry picked from commit 9513e608f3063fdb3e9d8bd04e6e5fe35a5bfcee)
Tegra124: Add support for the ARM architectural timer.
Reviewed-on: https://chromium-review.googlesource.com/174835
(cherry picked from commit 25a91fcf7e79cc450caa59bc6b65f954bb96ac6c)
nyan: Initialize the ARM architectural timer in the RAM stage.
Reviewed-on: https://chromium-review.googlesource.com/174836
(cherry picked from commit 581f592c12de91c0cf8279ede2850e38dd0cd2e8)
tegra124: nyan: Move mainboard level clock stuff into the mainboard source.
Reviewed-on: https://chromium-review.googlesource.com/174843
(cherry picked from commit 5ab100b0bad22814261f9b755b59394562c9145a)
tegra124: add some explanatory text about U7.1 computations.
Reviewed-on: https://chromium-review.googlesource.com/173910
(cherry picked from commit 822cad0ceeceeb5160c8216e05eec13fd04a6413)
Set the EC SPI clock source to PLLP and divide down to around 5MHz
Reviewed-on: https://chromium-review.googlesource.com/173954
(cherry picked from commit c0e22d76d3887ca1f727443a47db38dec12c0b74)
nyan: Move non-essential configuration out of bootblock and into ram stage.
Reviewed-on: https://chromium-review.googlesource.com/174844
(cherry picked from commit dad7f68c76f7b83edacd8b22c9dbd3f0ff027397)
tegra124: clocks: Save some IOs in clock_enable_clear_reset.
Reviewed-on: https://chromium-review.googlesource.com/174845
(cherry picked from commit 81b977a2758d42471667e2cbe31f160dfda5bca4)
tegra124: re-write SPI driver w/ full duplex support
Reviewed-on: https://chromium-review.googlesource.com/174446
(cherry picked from commit 51c9a34240d6a068780a7d1c27b032b56b2d3e54)
tegra124: move SPI-related structures from .c to .h
Reviewed-on: https://chromium-review.googlesource.com/174637
(cherry picked from commit 36760a4463c2c33f494ca7ea5a36810fa4502058)
tegra124: add frame header info to SPI channel struct
Reviewed-on: https://chromium-review.googlesource.com/174638
(cherry picked from commit e24773eb946e2c4cb5e828f055d45d92bd1a4f9f)
tegra124: re-factor tegra_spi_init()
Reviewed-on: https://chromium-review.googlesource.com/174639
(cherry picked from commit 88354b996459a702c36604f5f92c24e63df8de7e)
nyan: Set CrOS EC frame header parameters for SPI
Reviewed-on: https://chromium-review.googlesource.com/174710
(cherry picked from commit 29173ba5863eebb2864a8384435cde2f0d5ca233)
tegra124: Add Rx frame header support to SPI code
Reviewed-on: https://chromium-review.googlesource.com/174711
(cherry picked from commit 1d1630e770804649ef74d31db194d3bde9968832)
tegra124: add support for the Serial Output Resource (sor)
Reviewed-on: https://chromium-review.googlesource.com/174612
(cherry picked from commit 3eebd10afea4498380582e04560af89126911ed9)
nyan: tegra124: Enable I, D and L2 caches in romstage.
Reviewed-on: https://chromium-review.googlesource.com/173777
(cherry picked from commit 74512b7ecfbd50f01a25677307084699ee8c6007)
tegra and tegra124: Bring up graphics
Reviewed-on: https://chromium-review.googlesource.com/174613
(cherry picked from commit 7e944208a176cdac44a31e2a9961c8bd5dc4ece8)
nyan: Move the DMA memory region.
Reviewed-on: https://chromium-review.googlesource.com/174953
(cherry picked from commit c66e22859252eaebceb07a3118ac61f4cf6289eb)
tegra124: Increase CBFS cache buffer size
Reviewed-on: https://chromium-review.googlesource.com/174950
(cherry picked from commit 6dbb4e5f0d66c68df45ac73e3f223b856b715026)
tegra124: Add USB PLL, PHY and EHCI setup code
Reviewed-on: https://chromium-review.googlesource.com/174651
(cherry picked from commit ecd5c398ff6748a7d40089019471357b58d3a6ea)
tegra124: add in some undocument clock source and PLL registers
Reviewed-on: https://chromium-review.googlesource.com/174948
(cherry picked from commit 73fcc4981da6e4415b514eaafb42bc265ab0cd9a)
tegra124: small cleanups of the code
Reviewed-on: https://chromium-review.googlesource.com/174995
(cherry picked from commit 7256aba07e9567ef8d73f05e1f80c4d45fd57bda)
Squashed 34 commits for tegra124 / nyan support.
Change-Id: I050c7ad962e0d24550b0b33c9318e89c80d01f00
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6870
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The google mainboards were updated to unconditionally include
chromeos.c except for panther.
Change-Id: I35bbd56326ee0f94ee542bae28f9c23980e9a9ed
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6874
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ie3a843a76ebf9f5d825e14c4359fb3ecaa052e38
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6809
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As introduced in:
1783a3c ivybridge: LVDS gfx init.
The panel on the T530 is a AUO B156HW01 V.4, 40 pin LVDS (2 ch, 6-bit).
Tx parameters derived from datasheet table.
Change-Id: I2e3b56a2a3d1ede08a704b839cc11fe6d685cf5b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6395
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
We now have Native raminit for both sandy/ivybridge introduced in:
7686a56 sandy/ivybridge: Native raminit.
Let us make good use of this support over using the Intel MRC blob to
initialise memory.
USB RCBA configuration data taken between base of 0x3500 up to 0x3600
from `inteltool -r`.
Remark: Note the current port is poorly tested at the moment and I am the
sole maintainer, however one less blob invites more interest for better
support. More to come hopefully.
Change-Id: I41d0ef8303dfd369c5565b823e68a6bee09c44f5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6394
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Change-Id: Iaccaf5246e7ac5da2b51dd915c3f3ef807fc6467
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6875
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
nyan: Clock setup.
Reviewed-on: https://chromium-review.googlesource.com/172106
(cherry picked from commit 3697b6454c0aceebcf735436de90ba2441c9b7b1)
tegra124: Call into the mainboard bootblock init if one exists.
Reviewed-on: https://chromium-review.googlesource.com/172581
(cherry picked from commit 3a0cd48a0d1a9ce6b32ed614cd81fb81f5f82aec)
nyan: Add a mainboard specific bootblock.
Reviewed-on: https://chromium-review.googlesource.com/172582
(cherry picked from commit a83d065d660a26fe71ed79879c25f84a1b669f69)
nyan: tegra124: Redestribute the clock code between the mainboard and soc.
Reviewed-on: https://chromium-review.googlesource.com/172583
(cherry picked from commit ea703137fc37befa7d5a65afc982e298a0daca1b)
nyan: Initialize the i2c pins and controllers.
Reviewed-on: https://chromium-review.googlesource.com/172584
(cherry picked from commit 9c10a3074ef834688fea46c03551c2e3e54e44a8)
nyan: Initialize the PMIC.
Reviewed-on: https://chromium-review.googlesource.com/172585
(cherry picked from commit f6be8b0e607e05b73b5e4a84afcf04c879eee88a)
tegra124: add a chip.h and use it in NYAN
Reviewed-on: https://chromium-review.googlesource.com/172773
(cherry picked from commit 4dd5f1f091f2dcae5ce38203bb86c62994609f8f)
tegra: Reorder GPIO register accesses to avoid glitching
Reviewed-on: https://chromium-review.googlesource.com/172730
(cherry picked from commit 61bedbf0f839e19b284d21af2ad10f2ff15e17d5)
tegra: Turn GPIO wrappers into macros to make them easier to write
Reviewed-on: https://chromium-review.googlesource.com/172731
(cherry picked from commit 94550fdfa5a8005d2e6a313041de212ab7ac470c)
tegra: Change GPIO functions to allow variable arguments
Reviewed-on: https://chromium-review.googlesource.com/172916
(cherry picked from commit e95ccd984f718a04b6067ff6ad5049a2cd74466d)
tegra124: Implement starting up the main CPUs.
Reviewed-on: https://chromium-review.googlesource.com/172917
(cherry picked from commit 7c5169a197310e18a3df0f176c499669e3c2bda3)
tegra: Simplify the I2C constants.
Reviewed-on: https://chromium-review.googlesource.com/172953
(cherry picked from commit 130a07c86dfa5ba5ac4580f29db927c91f045c76)
tegra124: Fix SPI base addresses
Reviewed-on: https://chromium-review.googlesource.com/173322
(cherry picked from commit da808e46919ebd3b9f2377a5889f0d5f10b92357)
tegra124: Scrub the clock constants.
Reviewed-on: https://chromium-review.googlesource.com/172954
(cherry picked from commit 9305ff0696a6d556a97f928b8683770833a309a4)
tegra124: add DMA support
Reviewed-on: https://chromium-review.googlesource.com/172951
(cherry picked from commit 4d2a5a56b922ac37d2326d7b139697567aac37b8)
tegra124: add basic SPI driver
Reviewed-on: https://chromium-review.googlesource.com/172952
(cherry picked from commit 5f861f13c7fd2dd881f3cbd0f1b4d4a9994ce429)
tegra124: Add an assembly stub which is run first on the main CPUs.
Reviewed-on: https://chromium-review.googlesource.com/173541
(cherry picked from commit e142b9572a89f43fe984c4fc87e3203f380ff4de)
nyan: tegra124: Set up dynamic cbmem.
Reviewed-on: https://chromium-review.googlesource.com/173542
(cherry picked from commit b6e1a70103446abb5c3440f145617e6566879c6f)
tegra124: Add an soc.c which sets up the chip operations and memory resource.
Reviewed-on: https://chromium-review.googlesource.com/173543
(cherry picked from commit af49a5bd1f589cf053c4808510138aae26e20db4)
tegra124: extend chip.h to include video settings
Reviewed-on: https://chromium-review.googlesource.com/173600
(cherry picked from commit 87687633a2116f58fad7333b3b639cee9089ad29)
tegra124 and nyan: fill in the devicetree a bit more, add defines
Reviewed-on: https://chromium-review.googlesource.com/173684
(cherry picked from commit c107eaca3dea42be89f61690d0d6cb2181acb147)
tegra124: clean-ups for SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173599
(cherry picked from commit 1e2f9fd442ea336bf0663c3c8ea51f771e21beb7)
tegra124: add a #define for DMA alignment size
Reviewed-on: https://chromium-review.googlesource.com/173638
(cherry picked from commit f9dc2a8d8016fa7db974fb6cb01c3275e26832af)
tegra124: Add FIFO transmit functions to SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173639
(cherry picked from commit 97e61f36ad96ce2f9b12a7ef765ee73d3f4285f7)
tegra124: clean-ups for DMA driver
Reviewed-on: https://chromium-review.googlesource.com/173598
(cherry picked from commit 750c0a5d6942748dd21f3a3f884ad94a561e86e0)
tegra124: early display and display code.
Reviewed-on: https://chromium-review.googlesource.com/173622
(cherry picked from commit 651c7ab96b1f136865e4673a120de7afc1218558)
tegra124: Move transfer size handling to spi_xfer()
Reviewed-on: https://chromium-review.googlesource.com/173680
(cherry picked from commit 4a9b7b47b3c09d70063ea843054ffef98f554621)
tegra124: strict error detection and reporting for SPI
Reviewed-on: https://chromium-review.googlesource.com/173681
(cherry picked from commit c056fa954e1dab40a56faec6c50385763a2eb010)
tegra124: add thread-friendly delays to SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173648
(cherry picked from commit c1a321c8f61942801627f895c5db74c518e2aa8e)
Tegra124: Take the SPI1 controller out of reset and enable its clock.
Reviewed-on: https://chromium-review.googlesource.com/173787
(cherry picked from commit c026a3fb861e157f1e17a121fc2ef70b903f36f2)
tegra124: add two more clock setting values
Reviewed-on: https://chromium-review.googlesource.com/173772
(cherry picked from commit 7d79d7dd9f0c1fd7127a7ba41652d809ccff7a57)
nyan: Set up the ChromeOS related GPIOs and SPI bus 1 which goes to the EC.
Reviewed-on: https://chromium-review.googlesource.com/173788
(cherry picked from commit ff172bfe30f75983a1e8efa2ead0a4519583d0a8)
tegra124: Add some stub functions to the Tegra SPI driver.
Reviewed-on: https://chromium-review.googlesource.com/173789
(cherry picked from commit 8bc527aa4afd301c046b0e844c7fa400630af0d2)
tegra124: Build source files into the various stges needed by CONFIG_CHROMEOS.
Reviewed-on: https://chromium-review.googlesource.com/173790
(cherry picked from commit 86a6423b668ca912295c47d8c6e3ef6c6f8c6084)
nyan: Implement the code which reads GPIOs for ChromeOS.
Reviewed-on: https://chromium-review.googlesource.com/173791
(cherry picked from commit 4c394dfbce762574fc79edcb6e4ac6bf346e48a3)
nyan: Enable the CHROMEOS and ChromeOS EC related kconfig options.
Reviewed-on: https://chromium-review.googlesource.com/173792
(cherry picked from commit 2845a4487159aa4b1dba58d977f52c449574fc8e)
Tegra124: SDMMC: Take the SDMMC 3 and 4 out of reset and ungate their clocks.
Reviewed-on: https://chromium-review.googlesource.com/173793
(cherry picked from commit c238b87bcd9d35afd828476d6ee88322ac5d0f88)
tegra124: fix clear_fifo_status() in SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173738
(cherry picked from commit f415d2c0aaffc0f1a3592551a2db782d538f8f4f)
ARM: Include stdint.h in cpu.h.
Reviewed-on: https://chromium-review.googlesource.com/173774
(cherry picked from commit f1930faea3f14b2a2560a6c4058ef38532b6f1a6)
tegra124: When setting up the main CPU, set its CPSR appropriately.
Reviewed-on: https://chromium-review.googlesource.com/173775
(cherry picked from commit bc2ba9c15cfd22aeaca4f80b1d13a8b5e0178ead)
tegra124: fix wrong names in clk_rst.h
Reviewed-on: https://chromium-review.googlesource.com/173955
(cherry picked from commit 19dd9c85e4a3d1f77b23828bcbdd4bd8c2688b8d)
tegra124: Fix up the PLLX divider table.
Reviewed-on: https://chromium-review.googlesource.com/173778
(cherry picked from commit 3362cf3a7d6f5eaec879dda42323345922f6df17)
tegra124: clock: Get rid of cpcon and dccon.
Reviewed-on: https://chromium-review.googlesource.com/173779
(cherry picked from commit 08626ffac4a7e9ea3d4738af87e9e4cced7be2c7)
Tegra124: SPI: Set and unset CS in spi_claim_bus and spi_release_bus.
Reviewed-on: https://chromium-review.googlesource.com/173953
(cherry picked from commit a2df8f3a9c9c54c62d6ff37d3baff1d30ee6d355)
armv7: expose dcache_line_bytes() in cache API
Reviewed-on: https://chromium-review.googlesource.com/173975
(cherry picked from commit 6727f65702c7668fcb33848b4113bc3d3cc04e12)
libpayload: expose dcache_line_bytes() in ARM cache API
Reviewed-on: https://chromium-review.googlesource.com/174099
(cherry picked from commit 9387b02dff85b42944d95c3bccf59059c93fb4a9)
armv4: add a stub for dcache_line_bytes()
Reviewed-on: https://chromium-review.googlesource.com/173976
(cherry picked from commit 924f61ea895b9268c716791466637009bbac6469)
tegra124: Base early UART on CLK_M to enable debugging of PLL init code
Reviewed-on: https://chromium-review.googlesource.com/174339
(cherry picked from commit 8d9387432f0a0d9b257b040304238e543cced1aa)
tegra124: Add additional PLLs and redesign the divisor table
Reviewed-on: https://chromium-review.googlesource.com/174380
(cherry picked from commit f6a5f5c4562f1ca733505717c175be00413f2384)
Squashed 49 commits for tegra124/nyan that included a lot of churn on
different pieces.
Change-Id: I00e8f5b74e835e01b28ca2e9c4af3709c9363d56
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6869
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I3d664ab575bf9c49a7bff9a395fbab96748430d0
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6802
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
This fixes the ACPI interrupt storm on Parrot that happens when
closing the lid or entering suspend by lid close (seen in
/sys/firmware/acpi/interrupts/gpe1F). This patch inverts the interrupt
trigger level every time the interrupt is received so that it doesn't fire
until the next state change. http://askubuntu.com/questions/310196
is a good example of what this is trying to solve.
Change-Id: I8b095914e9330c3217a4ceb058613fa952f4a234
Signed-off-by: Andrew Litt <ajlitt@splunge.net>
Reviewed-on: http://review.coreboot.org/6858
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
During Vladimir's ACPI cleanups, this was moved into the mainboard's
enable stage, which will prevent the VGA option rom from executing
correctly. Move it to the finalize stage to make sure it runs after
all initialize functions have been called.
Change-Id: I0fcca4d4a95f89382f377ce923f82ecb71467fd8
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/6845
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The 8GB variant is x16 with 11 column bits and 4Gb density.
Change-Id: I3aa647aba88dbc928fefd826cbd01e4fa8273660
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176640
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit d18462f6fc0d40328e9619525240778ea6b1a426)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6856
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Move NFC_INT to GPIO9
Swap CODEC_INT to GPIO46 and WLAN_DISABLE_L to GPIO42
Swap ACCEL_INT to GPIO45 and PP1800_CODEC_EN to GPIO43
Enable PP1800_CODEC_EN, CODEC_LDOENA, CODEC_RESET_L
Old-Change-Id: I5547d34f1b7953808375aa5fe5e0a9640ae7e05e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175291
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 5bb4bc59e37ee4fe9a0556e08a53402c822e5bd6)
samus: Misc fixes from proto1b bringup
- NFC interrupt is expected in the kernel as a GPIO now,
so set it back to that type
- NFC FW update GPIO should be low
- Accel/Codec interrupts were still set as GPIO type,
they should be set as PIRQ type
Old-Change-Id: I354c848ae7b158943f4745872b82a49e17e67e2f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176513
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 75a0944f320c80618f12732a23344ce40010a688)
Squashed two small patches for samus.
Change-Id: I7ec56191fe2b7f19e470df175ad0bbe320a442f5
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6852
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Old-Change-Id: Icdde4cf5e1abb3ae1ad14279ebc129919ba30074
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170837
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit e9d87534ccacb42d508f1902786470798a2dbaea)
nyan: Add a "special-class" for aggregating BCT files into bct.cfg.
The config file which cbootimage processes to create a BCT could come from
multiple different files, individually selected based on config options,
and/or split up into different files for organizational purposes. This change
adds a special-class which collects those files and concatenates them all
together in a bct.cfg which can be processed more easily by other parts of the
build.
While the BCT files themselves are potentially very board specific, for
instance ones that hold memory timing information, this bit of code which
collects them is not. It has to be in each board file instead of alongside the
CPU, however, to ensure that the special class is set up before another
Makefile tries to use it. If we end up with lots of Tegra based boards which
duplicate this code over and over, we might want to revisit how this works.
Old-Change-Id: I58e1373434f89e69298990ea4643a19d8afdc309
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170922
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 3ae44178b7084037a75e16ce161b1432abf4246a)
nyan: Add bct files for nyan.
There's a config option which selects between the emmc and spi config files
depending on what the firmware is intended to boot from. These are copied from
the files installed by the tegra-bct-nyan ebuild, except that the spi config
file has been modified so that there's only one copy of the BCT and so that it
only has one configuration. This is to save space in the final image.
Old-Change-Id: Ibf1b895bb3ed060d394fc6ffcec67b6972bb21e3
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170923
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 6bbcffe04e8ae73c86bc05c577a67f909857e1c0)
Squashed three commits required to get nyan building since some patches
were out of order. Added a select to the nyan mainboard Kconfig to have
a rom size of 1024K to match the saved config on the chromium side.
Change-Id: I346dbb02d216adfea9707e40adf0a4d1e0fabf36
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6669
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
ExpressCard is connected to PCIe port 4.
Change-Id: I0cffabd9d9435d24a7e9c178c2f96fb1a9390320
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6850
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Replace codec config copied form T530 with dumped values from T520
/sys/class/sound/card0/hdaudioC0D0/init_pin_configs.
Intel Azalia HDMI is always enabled, but DP isn't connected to a
connector.
Change-Id: Iabdae4a6669ff429d5769a1bb0c0fb1abc12ba82
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6849
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I67f321583211efd9ed917276cc3989c6dc4ac649
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6848
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I7cf47a16928436734df29af951f987db9cf9530d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6847
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As a first step towards removing hardcodes from the FUI support,
change the haswell call to i915_lightup to panel_lightup, and pass the
intel_dp * as a parameter. Get rid of the scalar arguments and make
them part of intel_dp. Get rid of file-scope variables and use the
ones in the intel_dp struct. In falco, use functions that peppy
uses. Drop slippy support for FUI, it's a dead board; if this is ok
I'll remove the files next.
And, incidentally, fix the broken RGBX constant and change it to BGRX.
Change-Id: I46ef5a9ed8433382d042066ee3542af04cfc319a
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/174932
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 1e1ed410b445c8e2b7411e163d9d6f61499dc3f6)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6833
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
It's time to start cleaning up the falco graphics code, but it needs
to have its own files, not slippy's.
Change-Id: I7dbe27eafbf247b5c7806819bf0059d8b10e842c
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172501
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 262a0c16a39871d14972a92bff2dbc24de2ca3f0)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6832
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Nothing is connected to this port.
Change-Id: If3e466a3053fa694a511c2335c16381f77f56f47
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174089
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 5ddb6a444d5c3141868eaf618ecb014b0262a796)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6827
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
- GPIO29 is no longer connected so we don't need the SMI workaround
on the entry to sleep states.
- Disable touchscreen wake source until the kernel driver is working
so it does not wake immediately.
- Update a few GPIOs and disable the codec for now as it is leaking
into the 1.8V DDR rail.
Change-Id: Ia67b17eb4a097627befd8f39aadc939da1bf3d40
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174122
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0fdc9a83a434378499f825d072ce0adba5ffda59)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The LPDDR3 memory is x32 and dual rank with 14 row bits.
In addition the memory is actually elpida, even though
they are owned by micron it is confusing to label it as such.
And the ram strap options were inverted from what I expected
so the memory table needs to be updated.
Change-Id: Ia29a23e8140d884fb84f940806f041b40562aab9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174121
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0d63d36b8035165f95db798ed40488519e622a65)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6828
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ib7b6688982e9f74cffe40d11d4a9ec69acd55d37
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174088
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 41624b073fb59b1372ee5a8eba3ed64c7e633311)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6826
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ia835f16b156949f1841210c4a469223d5df28a54
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174087
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 8e51d1d74cdcadde9cbf10e8321d601b099c46bc)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6825
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I9366dded98bf15f6da44ce893dd10698ba09fd55
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6820
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
SMI1 is being written to but never read from.
Change-Id: I82c0800713e3093eb1317b5e1f6f228771134857
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6808
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I3d694e5b3092d78bce89f6baa7b2dedffddf3012
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6807
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ic044bf155bfcf93fa7cf3afd7287b7d0b615ef6d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6839
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I3463d0c283793547b00a7628f27f2f1777c21238
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6838
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Create a new mainboard based on the AMD DB-FT3 development board
(Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3
and DB-FT3b mainboards are identical except for the soldered-down
SoC device. The new AMD DB-FT3b development board (Olive Hill+)
features:
* Mini-ITX form factor
* 2x DisplayPort
* 1x VGA
* Integrated Realtek RTL8111-compatible Ethernet
* 2x USB 3.0 ports
* 2x USB 2.0 externally-accessible ports
* 2x USB 2.0 internally-accessible ports (via headers)
* micro LPC header
* Integrated platform security processor
* 2x Full-size DDR3 DIMM support (1 channel)
* Realtek ALC272 HD audio
* 2x SATA ports
* 1x SD card slot
* 1x PCIe (x4) slot
* 1x mini-PCIe slot
* 8-pin programming header
Eliminate the extraneous headers included in PlatformGnbPcie.
BiosCallOuts normally has a bunch of extraneous references to the
mainboard name. Rather than correct the spelling of a bunch of
instances, just get rid of them.
For the most part, use the Olive Hill ACPI definitions since the
DB-FT3b board ("Olive Hill+") and Olive Hill are the same board
with different processors.
Change some function prototypes for functions without parameters
to void instead of AGESA's VOID. There are no parameters for
these functions, so there is no real reason to use VOID.
S3 and fan control are not supported. HD audio is not working.
Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6681
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Change-Id: I12ce0dda823d7733c473ed5ef3b0470d95d794ae
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6805
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Checked by comparing binaries and seeing no differences other than
build info.
Change-Id: Ie702c540a18b50d6da0379f7c4e65adf3e4f18d4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6819
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Not referenced anywhere.
Change-Id: I6529f2ecbc34a2fa9ca720fea1224670eb98bdcd
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6815
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I1ab2118a3127dfacef6a389abd59050493e640fb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6817
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
There is some magic new SPD SDRAM type 241 to indicate LPDDR.
I cannot find it specificed in any JEDEC document but it is
what the reference code uses.
Change-Id: I21d7a943784435cb336ecdba7ca5eac0bf5fcd92
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171900
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0a1385515c62fd1e534b12568df8aaf2170e06f4)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6777
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I1be939e870e8792f5ebb23623fe8f7f119adec36
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6806
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I7b9b91519d87d70405b57920b3f1ab98c50526d1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6810
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
OEM strings should not be handled by mobo code but by common code with strings
collected from all devices.
Change-Id: Ibde61a1ca79845670bc0df87dc6c67fa868d48a9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6788
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Tablets have different mainboard version than laptop variants.
Change-Id: I77a1e2b50d30dcf3fa064e0c378ceca7ccf96e89
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6785
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ic213948e4d31457dda9b9f2d5a4f92cd34d1e57d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6757
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This interrupt needs to be specified in the MADT before it can
be used by the kernel driver.
Change-Id: Ic920a792a203cb06cd4529815680584a21532106
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171902
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit a330fddb62cb6346ad66ceb5b5c32b66aecd81e2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6778
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Add the coreboot board files for samus
- Based on Bolt
- GPIO setup based on 0.91 schematic
- Support both memory types
- No HDA verb table for this platform
- Some GPIO interrupts are shared and need to be passed to OS
Change-Id: I8dbd7639456c631a0115b03a493d94b5e2361ab5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171694
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 249a74c628264e3d4ce754803ede31238404b4d5)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6775
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ib2d7a3d9bda94f80886da96c2b766d29fc15a834
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/6772
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
driver
Move (and rename to make it clearer) the function that computes display
parameters from the dpcd and edid.
Change-Id: Idfbb56fd312b23c742c52abca1a34ae117a8fece
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171366
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 8f2b3bafee7cb05db8fae1c52fc9e1ee64e5e35d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6768
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The Exynos family and most ARM products are SoC, not just CPU.
We used to put ARM code in src/cpu to avoid polluting the code base for what was
essentially an experiment at the time. Now that it's past the experimental phase
and we're going to see more SoCs (including intel/baytrail) in coreboot.
Change-Id: I5ea1f822664244edf5f77087bc8018d7c535f81c
Reviewed-on: https://chromium-review.googlesource.com/170891
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit c8bb8fe0b20be37465f93c738d80e7e43033670a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6739
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
haswell/gma.c
The code to set the graphics translation table has been in the
mainboards, but should be in the northbridge support code.
Move the function, give it a better name, and enable support for > 4
GiB while we're at it, in the remote possibility that we get some 8
GiB haswell boards.
Change-Id: I72b4a0a88e53435e00d9b5e945479a51bd205130
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171160
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit d5a429498147c479eb51477927e146de809effce)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6741
Tested-by: build bot (Jenkins)
|
|
Peppy had some issues with FUI. We decided it was time to create
peppy-specific gma.c and i915io.c files. Using yabel and the i915tool,
we generated a replay attack, then interpolated against the slippy
i915io.c to get something working.
Also, in preparation for moving code out of the mainboard gma.c to
generic driver code, we got rid of some hardcodes in the mainboard
gma.c that have no business being there. The worst were the
computation of gmch_[m,n] and it turns out that we had some
long-standing bugs related to confusion about 'bpp'. I've killed the
word bpp everywhere I could because there are at least 3 things that
correspond to bpp. We now have framebuffer, pipe, and panel bpp. The
names are long because I want to avoid all the mistakes we've all been
making in the last year :-) Sadly, that means a lot of changes not just
peppy-related, but they are simple and in a good cause.
The test pattern generation is driven by a global variable in
mainboard/peppy/gma.c. I've found in the past that it's very useful
to have a function like this available, as one can activate it while
using a jtag debugger: halt at the right place in ramstage, set the
variable to 1, continue. It's not enough code to worry about always
including.
The last hard-codes for M and N registers are gone, and the function
to set from generic intel_dp.c code works. To avoid screen trash on a
dev mode boot, which we liked but nobody else did :-), we now take the
time to put a pleasing background color that sort of doubles as a
power LED.
Rough timing is ramstage start is at 2.2, and dev setup is done at
3.3. These new platforms are depressingly slow to boot. Rom init alone
is taking 1.9 seconds. 13 years ago it was 3 seconds from power on to bash
prompt. These CPUs are at least 10x faster and take much longer to get going.
Future work, once we get this through, is to move more functions to the
intel driver, and combine the mainboard i915io.c into the mainboard gma.c.
That separation only existed because i915io.c was generated by a tool, and it
had lots of ugliness. Most ugliness is gone.
Old-Change-Id: I6a6295b423a41e263f82cef33eacb92a14163321
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/170013
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
(cherry picked from commit 8cdaf73e3602e15925859866714db4d5ec6c947d)
snow: Fix a typo in devicetree.cb that was breaking the snow build.
A typo in a recent change broke the snow build.
Old-Change-Id: I93074e68eb3d21510d974fd8e9c63b3947285afd
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171014
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 154876c126a6690930141df178485658533096d2)
Squashed a fix into the initial patch and updated nehalem/gma.c
to have a non-static gtt_poll.
Change-Id: I2f4342c610d87335411da1d6d405171dc80c1f14
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6657
Tested-by: build bot (Jenkins)
|
|
override default ivy VGA_BIOS_ID
add model & part number
Remove ARCH_X86 as is in,
fd33781 Move ARCH_* from board/Kconfig to cpu or soc Kconfig.
Change-Id: I61dc6434de7af2d8672f784df87a8b9d3f0fb068
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6759
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I33e71c0a246583885368dc3d3af761c190b2fb5c
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6758
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I3b13bddfc127353e0c13d8d2ae7918d5c3deb72c
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6760
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Change-Id: I917a89da50d8efe998c368ba46206f2a1c580fd0
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6756
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This disables the blink hardware as it seems to be in the dump. This is
safer as it does not rely on 0 as the reset value when '0x00040000' is
the default according to the util/inteltool. As seen:
gpiobase+0x0018: 0x00040000 (GPO_BLINK) DIFF
Change-Id: Ia1fde108bf3752484f5e991600c435f776af0ced
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6436
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Use defines of offsets rather than hard coded values.
Change-Id: Id2471cd22aa402d74163473e48f86af9789cdaa7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6435
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Change-Id: I6b80ad0da39e93072e28b48c40e1c71602133e7b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6750
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
GPIO pin wireing information from schematic
Change-Id: I2d8dca151b6fbc15e0184ea07596039570843cda
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6740
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
SATA Port documentation
PCIe unused ports and documentation
T520 have no keyboard backlight
Change-Id: I517ff8519ea22a9a7a9b6e3136efd15d4a0f8fc4
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6743
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I71398ab2d7ef5b9256795861dd2bebbb0cf32d5f
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6742
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I60fa19b72f91f16db5f354aeec631f661e3494d3
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6736
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Thinkpad T520 ExpressCard Slot PCIe lanes are connected to port 4.
Tested with Serial Port Card. Information read from schematic / lspci
Change-Id: I459943d427578d135f9aed1aa66da269ddfeee87
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6735
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Clean up both ram and rom stage support and fix board to match.
Change-Id: I55e3e7338c0551f0fb663eb9707f16ecdc1aca35
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6509
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Compile romstage component as link-time symbols. Pass CONFIG_TTY0_BASE
as argument instead of hard coding and playing funny business with the
pre-processor. Fix board to match.
Change-Id: If6d0d5389bd4e7765bb6056cf488c94fd45915c2
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6463
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Change-Id: Iadaa6172347ebb7d367d1faa6ed9462fff07d7e6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6730
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I26fa6508f50faff7f1c1724884b5ffa30463b896
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6728
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ic877d6285ce3983268b16ddb5b4e15743f5adf86
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6727
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I560d693d0d72ca8dcd099eff6b0c40716fb0c0b0
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6726
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I58760500252e78da947685c18201b6d446368333
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6729
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I37d48279b1b022c4573bd09d3db6bf536d5dab9a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6724
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: If771a84f25710e1fb2228816e3ca0139e2f95aa7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6732
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
As is in:
91175bb lenovo/x201 & x230: Add EC info to SMBIOS
This is needed for the Linux driver for the Lenovo's to properly attach.
Change-Id: Ib910b25f392d9d3d6362b6909ce9fd4eeae9a096
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6399
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I09852ea56495da17e7607064d74d98f2296f34b1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6721
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ibf66d46f47fe465cc805f85de818a77327cd7258
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6722
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I952fdb113e2696785695b416d9292b7107099994
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6723
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ie686d20811f33c620156c149315807343dde7784
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/6700
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
