summaryrefslogtreecommitdiff
path: root/src/mainboard/wyse/s50
AgeCommit message (Expand)Author
2017-03-08AMD geode: Avoid conflicting main() declarationKyösti Mälkki
2016-09-26mainboard/*/*/irq_tables.c: Use tabs for indentsElyes HAOUAS
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
2016-06-18AMD boards: Fix romstage main() declarationKyösti Mälkki
2015-11-10mainboard: Remove empty mainboard.c filesPaul Menzel
2015-11-05mainboard: Remove last_boot NVRAM optionTimothy Pearson
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
2015-06-08Remove empty lines at end of fileElyes HAOUAS
2015-05-21Remove address from GPLv2 headersPatrick Georgi
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
2015-02-16mainboard/cmos: Kill off unused boot_* parametersTimothy Pearson
2015-02-16mainboard/cmos: Move ECC variables out of fallback mechanism byteTimothy Pearson
2015-02-16mainboard/cmos: Delete obsolete commented parametersTimothy Pearson
2015-01-06mainboard: Drop print_ implementation from non-romcc boardsStefan Reinauer
2015-01-06mainboard/*/romstage.c: Sanitize system header inclusionsEdward O'Callaghan
2014-12-02Replace hlt with halt()Patrick Georgi
2014-08-15intel/cpu: rename car.h to romstage.hAaron Durbin
2014-08-14Intel: Add common header file for CAR setupEdward O'Callaghan
2014-07-18mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-07-08mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
2014-01-19board-status: Add board_info.txt extracted from wiki.Vladimir Serbinenko
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
2012-11-16Fix PIRQ routing abstractionStefan Reinauer
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
2012-07-26Drop mainboard chip.hStefan Reinauer
2012-02-17Remove whitespace.Patrick Georgi
2012-02-13AMD Geode cpus: apply un-written naming rulesKyösti Mälkki
2012-01-07Update geode GX2 tree to match LX.Nils Jacobs
2011-11-01remove trailing whitespaceStefan Reinauer
2011-04-20run uart_init() from console_init, just like the other console initialization...Stefan Reinauer
2011-04-11Unify use of post_codeAlexandru Gagniuc
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
2010-12-29-Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)Nils Jacobs
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
2010-11-22Drop per-board ram_check() calls for now.Uwe Hermann
2010-11-21Simplify a few code chunks, fix whitespace and indentation.Uwe Hermann
2010-11-21Drop excessive whitespace randomly sprinkled in romstage.c files.Uwe Hermann
2010-11-21Use DIMM0 et al in lots more places instead of hardocding values.Uwe Hermann
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
2010-11-05Add Kconfig CPU speed selection to Geode GX2 boards.Nils Jacobs
2010-11-05GX2: Define the unused DIMM1 to 0xFF to make it obvious it is a bogus value.Nils Jacobs
2010-11-01Change Geode GX2 to use the auto DRAM detect code from Geode LX.Nils Jacobs
2010-10-13Enable or disable the power button in KconfigPeter Stuge
2010-10-05Remove lib/ramtest.c-include from all CAR boards.Patrick Georgi
2010-09-27Move CAR config from mainboard to CPU config for AMD GX2 boards.Warren Turkal
2010-09-27RAMBASE = 0x4000 is no longer needed. Drop it.Stefan Reinauer
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
2010-08-26Remove unused mainboard_config definitions. Trivial.Myles Watson
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
2010-07-28Let Geode GX2 use geode_post_code.h just like Geode LXNils Jacobs
2010-07-26This patch converts the Geode GX2 boards to CAR.Nils Jacobs
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
2010-05-25Move CS5535 specific setup from GX2 driver to CS5535. Stefan Reinauer
2010-05-14This patch cleanes up the Wyse S50 port and unifies the memmory regionsNils Jacobs
2010-05-09Remove pc80/serial.c includes in ROMCC boards and includePatrick Georgi
2010-05-08Add the Wyse S50 thin client to Coreboot.Nils Jacobs
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 03:18:59 +0000